1007528823/319988491/611768150915/23MMP1549-PP05

1007528786/319988490/611768150908/23MMP1549-PT01

1007528870/319988501/611768150731/23MMP1549-PB01

USE AND CARE GUIDE

RYDEN ELECTRIC FIREPLACE MEDIA MANTEL

Questions, problems, missing parts?

Before returning to the store, call Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

1-877-527-0313

HOMEDEPOT.COM

THANK YOU

We appreciate the trust and confidence you have placed in StyleWell through the purchase of this Electric Fireplace. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing StyleWell!

Table of Contents

Maximum Load Warning ...........................................2

Safety Information .....................................................3

Warranty .....................................................................5

Pre-Assembly .............................................................6

Hardware Included ................................................... 6

Product Specifications .......................................................

6

Tools Required ...................................................................

6

Package Contents ...................................................................

7

Assembly ....................................................................8

Operation .................................................................17

FCC/IC Information .........................................................

20

Care & Cleaning .......................................................20

Troubleshooting .......................................................21

Replacement Parts ..................................................23

Maximum Load Warning

MAXIMUM LOAD 60 lb. (27.3 kg)

MAXIMUM LOAD 30 lb. (13.6 kg)

MAXIMUM LOAD 15 lb. (6.8 kg)

MAXIMUM LOAD 15 lb. (6.8 kg)

MAXIMUM LOAD 20 lb. (9.1 kg)

CAUTION: This unit is intended for use only with the products and maximum weights indicated. Use with other products or products heavier than the maximum weights indicated may result in instability causing possible injury.

NOTE: Flat Panel TVs with base support should be placed squarely in the center of the stand with no overhang on any side.

2

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Safety Information

Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any question regarding the product, please call customer service at 1-877-527-0313, 8 a.m.-7 p.m., EST, Monday-Friday,

9 a.m. - 6 p.m., EST, Saturday.

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following:

1. Read all instructions before using this appliance.

2. If possible, always unplug this appliance when not in use.

3. Only a qualified service person should repair this product.

4. Do not use outdoors.

5. Do not cover the cord under the carpeting. Do not cover

with throw rugs, runners or the like. Arrange the cord away

from traffic areas and where it will not be tripped over.

6. To disconnect this appliance, turn the controls to the off

position, and then remove the plug from the outlet.

7. Connect to properly grounded outlets only.

8. This appliance, when installed, must be electrically

grounded in accordance with local codes or, in the

absence of local codes, with the current CSA C22.1

Canadian Electrical Code. For U.S.A. installations, follow

local codes and the National Electrical Code, ANSI/NFPA

NO.70.

9. This appliance has hot and arcing or sparking parts inside.

Do not use it in areas where gasoline, paint or flammable

liquids are used or stored. This fireplace should not be

used as a drying rack for clothing. Do not hang Christmas

stockings or other decorations on or near this product.

10. There is a thermostat limiter inside the heater. When inner

temperature overheating or abnormal heating occurs, the

thermostat protective device will cut off the power supply

to avoid damage to the fireplace or risk of fire.

DANGER: High temperatures may be generated under certain abnormal conditions. Do not partially or fully cover or obstruct the front of this heater.

WARNING: In order to avoid overheating, do not cover the heater.

WARNING: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

WARNING: Under no circumstances should this fireplace be modified. Parts that must be removed for servicing must be replaced prior to operating this fireplace again.

WARNING: This heater may include a visual alarm to warn that parts of the heater are getting excessively hot. If the alarm illuminates, immediately turn the heater off and inspect for any objects on or adjacent to the heater that may have blocked the airflow or otherwise caused high temperatures to have occurred.

DO NOT OPERATE THE HEATER WITH THE ALARM ILLUMINATING.

WARNING: This appliance is not a toy. Supervise children playing near it.

WARNING: Use extreme caution when operating heater near children and the disabled.

WARNING: This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate this appliance where it may fall into a bathtub or other water container.

WARNING: Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the appliance.

WARNING: To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where the opening may become blocked.

WARNING: Use this appliance only as described in the manual.

Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons.

WARNING: This appliance has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or flammable liquids are used or stored. This fireplace should not be used as a drying rack for clothing. Do not hang Christmas stockings or other decorations on or near this product.

CAUTION: Never leave the heater operating unattended.

Extreme caution is necessary if unsupervised children or invalids are nearby.

CAUTION: Before assembly, carefully use scissors or a utility knife to cut and unwrap all parts. Make sure you do not discard the hardware.

3

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Safety Information (continued)

NOTE: Use care in assembling your new fireplace. Take your time and use the hardware provided and a quality Phillips head screwdriver. Never overtighten bolts.

• Do not sit on any part of the mantel.

NOTE: To avoid injury from unexpected starting or electrical shock, do not plug the power cord into a source of power during unpacking and assembly. The cord must remain unplugged whenever you are adjusting/assembling the fireplace.

If any part is missing or damaged, do not attempt to use or plug in the power cord until the missing or damaged part is correctly replaced.

NOTE: This unit is not intended for use with CRT TVS. Use only with flat- panel TVS and audio/video equipment meeting recommended size and weight limits. Never use with larger/ heavier than recommended flat-panel TVS or equipment.The base of the television must be able to rest on the supporting surface of the unit without over-hanging the edges. Improperly positioned flat-panel TVS, or flat-panel TVS and other equipment that exceed recommended size and weight limits could fall off or break the unit, causing possible serious injury. For use with televisions weighing 60 lbs (27.2 kg) or less. Use with heavier televisions may result in instability causing tip over resulting in death or serious injury.

NOTE:

SAVE THESE

INSTRUCTIONS

4

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

1 Year Limited Warranty: The manufacturer warrants that your new Electric Fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations.

1. Install and operate this appliance in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.

2. This warranty is non-transferable, and is made to the original owner, provided that the purchase was made through an authorized supplier of the product.

3. The warranty is limited to the repair or replacement of part(s) found to be defective in material or workmanship, provided that such part(s) have been subjected to normal conditions of use and service, after said defect is confirmed by the manufacturer’s inspection.

4. The manufacturer may, at its discretion, fully discharge all obligations with respect to this warranty by refunding the wholesale price of the defective part(s).

5. Any installation, labor, construction, transportation, or other related costs/expenses arising from defective part(s), repair, replacement, or otherwise of same, will not be covered by this warranty, nor shall the manufacturer assume responsibility for same.

6. The owner/user assumes all other risks, if any, including the risk of any direct, indirect or consequential loss or damage arising out of the use, or inability to use the product, except as provided by law.

7. All other warranties – expressed or implied – with respect to the product, its components and accessories, or any obligations/liabilities on the part of the manufacturer are hereby expressly excluded.

8. The manufacturer neither assumes, nor authorizes any third party to assume on its behalf, any other liabilities with respect to the sale of the product.

9. The warranties as outlined within this document do not apply to non-accessories used in conjunction with the installation of this product.

10. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

This warranty is void if: a. The fireplace is subjected to prolonged periods of dampness or condensation.

b. Any unauthorized alteration, willful abuse, accident, or misuse of the product.

c. You do not have the original receipt of purchase.

5

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Pre-Assembly

HARDWARE INCLUDED

AA BB CC DD EE FF GG HH II JJ

KK

II

JJ

KK

LL

EE

FF

GG

HH

Part

AA

BB

CC

DD

MM

NN

OO

PP

QQ

RR

LL MM NN

Description

Screw 4 x 50 mm

Screw 3 x 12 mm

USB output

Screw 3 x 15 mm

Magnetic Catch

Back Panel Bracket

Screw 3.5 x 19 mm

Screw 3 x 12 mm

Handle with Screw

Door Bumper

Shelf Pin

Screw 4 x 15 mm

Metal Bracket

Tipping Restraint Hardware

Threaded Insert (pre-installed)

Floor Glide (pre-installed)

Metal Plate (pre-installed)

Hinge (pre-installed)

OO PP QQ

Part Number

PH-SCRBLK006

PH-SCRBLK004

P23MMP1549-CC

PH-SCRBLK010

PH-MCHBRW001

PH-BKTBLK017

P23MMP1549-GG

PH-SCRBLK007

VAN10419L

PH-BMPCLR001

PH-SPNPCSPLB2

PH-BKTBLK009

PH-BKTBLK007

PH-FTRHH510

PH-THRZNC001

PH-GLDBRW001

PH-PLTBRZ001

PH-HNGBRZ019

RR

PRODUCT SPECIFICATIONS

VOLTAGE

AMPS

WATTS

FAN

120VAC, 60 Hz

12.5 Amps

1500 Watts

30 Watts

NOTE: Hardware not shown to actual size.

PLANNING ASSEMBLY

Before beginning assembly of product, make sure all parts are present. Compare parts with Hardware Included and Package Contents lists.

If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts.

Estimated Assembly Time: 40 Minutes

TOOLS REQUIRED

Phillips Screwdriver

6

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

16

2

2

2

2

16

16

2

Quantity

8

2

1

4

4

6

2

1

4

4

Pre-Assembly (continued)

PACKAGE CONTENTS

G

H

H

I

D C

L

L

B

E

L

L

A

K

Part

C

D

A

B

E

F

K

L

M

I

J

G

H

J

Description

Bottom Shelf

Left Partition

Right Partition

Media Shelf

Left Side Panel

Right Side Panel

Top Panel

Side Back panel

Upper Back Panel

Left Door

Right Door

Adjustable Shelf

Electric Fireplace Insert

F

NOTE: All panels are labeled left and right as viewed from the front of unit.

M

Quantity

1

1

1

1

1

1

1

4

1

1

1

1

2

7

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Assembly

1

Attaching the center assembly

Locate the Media Shelf (D) and the Left and Right Partitions (B and C).

Align the Media Shelf (D) between the Left and Right Partitions (B and C). Push together, inserting the pre-installed screws on the Media Shelf (D) into the holes on the Left and Right Partitions (B and D) as shown.

Tighten the fasteners on the Left and Right Partitions (B and C) using a Phillips Screwdriver.

B

2

Attaching the base

Locate the Bottom Shelf (A).

Align the Bottom Shelf (A) with of the center assembly from step 1.

Insert Screws (AA) through the Bottom

Shelf (A) and into the pre-drilled holes on the edges of the center assembly as shown.

Securely tighten all screws using a

Phillips screwdriver.

D

FRONT

C

A

AA

8

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Assembly (continued)

3

Attaching the side panels

Locate the Left and Right Side Panels (E and F).

Align the Left and Right Side Panels (E and F) with the Bottom Shelf (A).

Insert Screws (AA) through the Bottom Shelf (A) and into the pre-drilled holes on the edges of the Left and Right Side Panels (E and F) as shown.

E

A

F

AA

4

Installing the USB port

Slide the USB output (CC) through the opening in the center shelf.

Carefully secure the USB output (CC) in place using

Screws (BB) and a Phillips screwdriver.

BB

CC

9

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Assembly (continued)

5

Attaching the back panels

Locate the Side Back panel (H) and the

Upper Back Panel (I).

Slide the Side Back panel (H) into the grooves between the center partitions and the outer side panels as shown. Slide all the way down until the Side Back panel (H) meet the bottom shelf.

Slide the Upper Back Panel (I) into the grooves between the center partitions. Slide all the way down until the Upper Back Panel

(I) meets the bottom of the center shelf.

H

I

H

6

Attaching the door handles

Locate the Cabinet Doors (J and K).

Each Door Handle (II) has pre-attached screws. Remove these screws and place handles over the pre-drilled holes in each Cabinet Door (J and K).

Place the pre-attached screws on the other side of the Cabinet Doors (J and K) and tighten with a Phillips screwdriver through the door and into the Handle (II) .

J

II

K

II

10

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Assembly (continued)

7

Attaching the cabinet doors

Lift Left Door (J) and align the hinges with the pre-attached hardware on the main assembly as shown.

Slide the barrel of the hinge on the door downward onto the pin of the hardware on the main assembly. Repeat steps with

Right Door (K).

J

8

Attaching the door catch

Locate the Top Panel (G) and place on a flat surface.

Attach the Magnetic Door Catches (EE) on each side of the Top

Panel (G) using Screws (DD) as indicated by the diagram.

K

DD

EE

11

G

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Assembly (continued)

9

Attaching the top panel

Place the Top Panel (G) on top of the main assembly while aligning the pre-installed screws with the screw holes on the edges of the main assembly.

After inserting the screws into the holes, tighten the fasteners from underneath the Top Panel (G) using a

Phillips Screwdriver as shown.

G

10

Attach door bumpers

Place a Door Bumper (JJ) on the lower corner of each door, opposite from the hinges as shown. Simply peel off the adhesive and press the Door Bumper (JJ) firmly against the door.

JJ

12

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Assembly (continued)

11

Securing the surround brackets

Find the pre-attached metal plate bracket behind the top surround rail. Rotate the bracket to span the joint of the top surround rail and side surround rail.

Secure the surround bracket with a Screw (HH).

Repeat to secure both sides.

HH

12

Securing the back panels

Place the Back Panel Brackets (FF) between the back panels and the grooves of the assembly as shown.

Fasten each Back Panel Bracket (FF) using Screws

(GG). Repeat until all brackets are in place as indicated by the diagram.

13

GG

FF

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Assembly (continued)

13

Inserting the adjustable shelves

Locate the four Adjustable Shelves (L).

Insert the Shelf Pins (KK) into the pre-drilled holes on the inside of each cabinet side panel at your desired height. Align all Shelf Pins (KK) to the same height to ensure your shelf is level.

Rest the Adjustable Shelves (L) on the Shelf Pins

(KK) as shown.

L

L

14

Installing the fireplace insert

Lift the Fireplace Insert (M) carefully into the back of the unit and center in the fireplace insert opening.

Do not drag the Fireplace Insert (M) across the base as it may scratch your unit.

KK

L

L

L

M

14

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Assembly (continued)

15

Securing the fireplace insert

Align the Metal Brackets (MM) behind the Fireplace

Insert (M) and above the pre-drilled holes.

Secure with the Mounting Screws (LL) on both sides.

LL

MM

15

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Assembly (continued)

16

Installing the tip restraint hardware

When the Tipping Restraint Hardware (NN) is properly installed, it can provide protection against unexpected tipping of the Unit due to small tremors, bumps or climbing.

Each Tipping Restraint Hardware (NN) includes one Unit

Anchor, one Wall Anchor, one Anchor Tether, and four

Anchor Screws. Use these to complete the following steps for a proper installation.

Locate a secure wall stud behind the unit closest to the left side.

Align the Unit Anchor with a wall stud and attach to the

Unit with two Anchor Screws using a Philips Screwdriver.

The Anchor Screws must pass through the Top Assembly for proper installation.

Align the Wall Anchor in the center of the wall stud, at level with the Unit Anchor, and attach with two Anchor

Screws using a Philips Screwdriver.

On the Anchor Tether, detach the cable from the connector and loop the loose cable through the eyelets on the Wall

Anchor and Unit Anchor. Reattach the loose cable to the connector, but do not tighten.

Locate a secure wall stud behind the unit closest to the right side and repeat the steps above.

Tighten both Anchor Tethers by pulling the cable through the connector.

NN

Wall

NOTE: Installation of the Tipping Restraint Hardware (NN) will provide a small space between the wall and the unit. This will allow you to run power cords and connector cables to your television or other devices placed on top of the Unit.

WARNING: Installing the Tipping Restraint Hardware will help prevent accidents or damage to the unit.

16

WARNING

• Unit must be placed on a level surface or leveled with included hardware (when applicable).

• Do not sit or stand on or allow children to climb, sit or stand on the assembled product.

• For safety reasons, it is imperative that this unit be mounted to the wall or floor.

• Unit can tip over causing severe injury or death.

• Do not exceed the recommended weight limits.

• Before cutting, drilling or hammering into any wall or floor surface, verify the location of electrical, plumbing and gas lines, Cutting may cause serious injury.

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

NOTE: The control panel can be accessed at the upper-right corner of the insert.

1

Powering the fireplace

Push the Power button to supply power to all functions of the fireplace and put the insert in a standby mode.

Push the Power button again to turn off all functions.

NOTE: All previous settings are held in memory, so the next time you power up the fireplace, the unit will turn on with the same settings.

NOTE: Holding the Power button on the control panel for

10 seconds will disable the heater function.

2

Adjusting the flame

There are 5 unique 3D flame colors that can be selected.

1: Spectrafire®

2: Sapphire

3: Amethyst

4: Campfire

5: Midnight Fire

AU: Auto Cycle will seamlessly cycle through the above flame colors.

00: Off

3

Adjusting the heater

Press the Heater button to set the thermostat. The fireplace contains two infrared quartz heating elements.

The thermostat setting range is 82°F - 62°F or 27°C - 17°C or always ON.

The thermostat is adjustable by 2°F or 1°C increments.

4

Setting the timer

Pressing the Timer button will cycle through the timer settings; 30 minutes, 1 Hour, 2H, 3H, 4H, 5H, 6H, 7H,

8H, 9H and off.

NOTE: To change between °F and °C press and hold the

Heater button on the control panel for 3 seconds.

17

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Operation (continued)

5

Adjust the fan speed

Press the Fan button in succession to cycle through the speed settings; 1 (lowest speed) 2 (middle speed)

3 (highest speed.) and 0 (OFF).

6

Fan oscillation

Pressing this button will turn on or off the oscillation feature. When on, the louvers will oscillate back and forth to distribute the air flow to a wider area.

7

Replacing the remote control battery

When the remote control stops operating or its range seems reduced, it is time to replace the battery with new ones.

On the back end of the remote, press and slide

the battery door open and remove the old battery.

Insert two AAA batteries, checking that the + and -

sides of the battery match inside the battery

compartment.

Replace the battery compartment door.

NOTE: Do not mix old and new batteries. Do not mix alkaline, standard (carbonzinc), or rechargeable (nicad, nimh, etc) batteries. Do not ingest batteries.

8

Disposing of used batteries

The battery may contain hazardous substances that could endanger the environment and human health.

This symbol marked on the battery and/or packaging indicates that used batteries shall not be treated as municipal waste. Instead, they should be left at the appropriate collection point for recycling.

By correctly disposing used batteries, you prevent potential negative consequences for the environment and human health. Recycling used materials also conserves natural resources.

For more information about collecting and recycling used batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased this product.

NOTE: Please operate the remote control at a slow measured pace. Press the remote control buttons with an even motion and gentle pressure. Repeatedly pressing buttons in rapid succession may cause the transmitter to malfunction.

NOTE: Batteries should be removed if the product is to be left unused for a long time.

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

18

Operation (continued)

9

Power cord information

This heater is for use on 120 volts. The cord has a plug as shown in the figure.

Connect to properly grounded outlets only.

Do not use a two-prong adapter. Never use with an extension cord or relocatable power tap (outlet/ power strip).

10

Patented Safer Plug ® information

This product is equipped with a Safer Plug ® , which is an advanced safety device that helps detect electrical fires caused from faulty outlets.

Overloading of outlets, adapters and surge protectors may cause overheating, damage, and increased risk of fires. The Safer Plug continuously monitors the temperature in the plug and outlet and will turn off the heater to prevent unsafe outlet overheating.

If the Safer Plug cuts the power due to unsafe conditions it will show an

“ Er ” message on the screen. If this occurs the Safer Plug has prevented a potentially unsafe condition.

To reset the device if this occurs, first allow the plug to cool down. Once the plug has cooled down, unplug the device and wait 5 seconds, then plug back in and continue to use normally.

If the Safer Plug continues to activate, your outlet may be faulty. Check your heater cord and plug connections. Faulty wall outlet connections or loose plugs can cause the outlet or plug to overheat. Be sure the plug fits tight in the outlet. Heaters draw more current than small appliances.

Overheating of the outlet may occur even if it has not occurred with the use of other appliances. During use check frequently to determine if your plug outlet or faceplate is HOT! If so, discontinue use of the heater and have a qualified electrician check and/or replace the faulty outlet(s).

SAFER PLUG

19

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

FCC/IC Information

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could

void user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

Care and Cleaning

Dust your fireplace regularly with a soft non-lint-producing cloth or household dusting product.

Clean your fireplace with a gentle non-abrasive household cleaner. Dry your fireplace immediately with a soft cloth or towel.

The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life and require no further

lubrication. However, we recommend periodic cleaning/vacuuming of the fan/heater.

Make sure the unit is turned OFF and unplugged whenever you are cleaning the heater or fireplace.

WARNING: Make sure the power is turned off before proceeding with repairs. Any electrical repairs or rewiring of this unit should be carried out by a licensed electrician in accordance with national and local codes. If repairing or replacing any electrical component or wiring, the original wire routing, color coding and securing locations must be followed. During any service of this appliance, the power to the unit must be turned off. First turn the main power switch to the OFF position. Then remove the electrical plug from the wall outlet.

WARNING: Electrical outlet wiring must comply with local building codes and other applicable regulations to reduce the risk of fire, electrical shock and injury to persons.

WARNING: Do not use this fireplace if any part of it has been under water. Immediately call a qualified service technician to inspect the fireplace and replace any part of the electrical system.

WARNING: Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electrical shock or personal injury.

20

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Troubleshooting

PROBLEM

Fireplace stopped heating before reached desired temperature.

ROOT CAUSE

Fireplace has reached set temperature.

Temperature around fireplace might be a few degrees higher than other area in the room .

CORRECTIVE ACTION

Set the fireplace to a higher temperature or always “on”.

Display shows " "

Display shows " "

Display shows " "

The thermostat sensor is broken or disconnected.

The thermostat sensor short circuited.

Manual Reset overheat protection has triggered.

Unplug the fireplace, remove the back panel of the fireplace and check that the thermostat is plugged into the main circuit board. If this does not solve the problem contact customer service for a replacement thermostat sensor.

Contact customer service for a replacement thermostat sensor.

Inspect the heater and check that the air inlets and outlets are not blocked as this may cause overheating. Unplug the heater for 30 minutes and allow it to cool down. Replug and operate. Monitor the heater for signs of overheating. If the problem persists, discontinue use of the heater and contact customer service.

Display shows " "

Heater does not blow warm air.

There is no power and the logs do not glow.

There is no power to the unit.

The logs glow, but there is no flame effect.

Power cord overheating protection has activated.

The heater is in a cool down cycle.

The flame board is broken.

Check your heater cord and plug connections. Faulty wall outlet connections or loose plugs can cause the outlet or plug to overheat. Be sure the plug fits tight in the outlet. Heaters draw more current than small appliances. Overheating of the outlet may occur even if it has not occurred with the use of other appliances. During use check frequently to determine if your plug outlet or faceplate is HOT! If so, discontinue use of the heater and have a qualified electrician check and/or replace the faulty outlet(s).

Normal operation will continue to run for less than one minute before shutting down. Times will vary based on temperatures.During this time cool air will blow.

Check that the unit is plugged into a standard 120V outlet. Press the Power button several times and make sure power is set to the “ON”position.

Contact customer service for a replacement flame board.

21

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Troubleshooting (continued)

PROBLEM ROOT CAUSE

Flame effect works but heater function does not and the emberbed flashes when the Heater button is pressed.

The heater is disabled.

There are no batteries.

The remote control is not working.

The signal is poor.

The remote is too far from the heater.

CORRECTIVE ACTION

With the power on press and hold the Power button on the control panel for 10 seconds.

Once re-enabled the emberbed lights will flash multiple times.

Change the remote batteries.

Operate remote transmitter at a slow measured pace.

Press the remote control buttons with an even motion and gentle pressure. Repeatedly pressing buttons in rapid succession may cause the transmitter to malfunction.

Operate the remote at a distance less than

20 ft. from the front of the appliance; point the remote at the control panel.

22

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Replacement Parts

For replacement parts, call our customer service department at 1-877-527-0313, 8 a.m.-7 p.m., EST, Monday-Friday,

9 a.m. - 6 p.m., EST, Saturday.

Part

1

2

6

7

8

9

10

11

3

4

5

Description

Ember bed with Log Set

Flame Generator Drive Motor

Flame Circuit Board

Control Panel Circuit Board

PCB Binboard

Blue Flame Circuit Board

Main Circuit Board

Blower/ Heater assembly

Synchronous Motor Assembly

Front Glass Assembly

Remote Control

Qty.

1

1

1

1

1

1

1

1

1

1

1

Part Number

Y20-S281-P02SS

P10-6-QSS

Y20-S281-P40SS

Y20-S292-P32SS

Y20-S292-PBSS

Y20-S292-P40BLSS

Y20-S292-P15-HDSS

Y20-S292-P01SS

Y20-S292-P10SMSS

Y20-S281-P27SS

P179-HDSS

4

1 2 3

5 6 7

8

9 10

23

11

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

1-877-527-0313

HOMEDEPOT.COM

Retain this manual for future use.