DARE Innovative Tools

Hello,

We thank you for selecting your DARE INNOVATIVE TOOLS

STRAIGHT BACK BROOM.

Assembly is minimal and can be easily done by following the few simple steps below:

Components List:

1. 2-Handed Hand-grip

2. Handle

3. Broom head

4. Assembly fasteners

5. Support brackets

Assembly:

1. To attach handle to the broom head. a) Completely insert and thread handle into broom head.

Assembly Instructions for BR24BGM, BR24BGF & BR24BGR Models.

2. To attach your STRAIGHT BACK Hand-grip to handle. a) Loosen screw/s located on Hand-grip with a Phillips-

Maintenance:

1. Check all fasteners at frequent intervals for proper tightness to be sure the broom is in safe working conditions.

2. Do not use broom if any component becomes damaged.

Proper use:

Your DARE INNOVATIVE TOOLS STRAIGHT BACK BROOM provides you power, comfort and back-pain relief like no other broom can. a) The STRAIGHT BACK Hand-grip allows you to maintain an upright neutral spine reducing or eliminating lower back pain. There is no need to bend at the waist to push your broom forward. b) The STRAIGHT BACK Hand-grip accommodates both hands for greater control leading to less physical exertion and greater comfort.

head screwdriver. b) Completely insert handle into Hand-grip as shown in

Fig 1. c) Place broom on a flat non-abrasive surface to align

Hand-grip and broom head as shown in Fig. 1. d) Securely retighten Hand-grip screw/s with a Phillipshead screwdriver.

Contact Info:

For assistance or comments please feel free to reach us at - https://www.usshovel.com/contacts

Fig 2.

Fig 1.

3. To attached Support Brackets follow instructions packaged with brackets.

USSHOVEL.COM

07.08.2020