Crystorama 507-SA Broche 24 Instructions
Advertisement
Advertisement
MODEL#: 507-
S A
ASSEMBLY AND DRESSING INSTRUCTIONS
FIXTURE WIRE
MACHINE SCREWS
MOUNTING BAR
OUTLET SCREW
GROUND SCREW
WIRE CONNECTOR
GROUND WIRE
INSULATION PAD
CANOPY
BALL NUTS
Electrical Danger Turn Power off
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
All electrical components must be
SOCKET SLEEVE
THREAD
LEAF ASSEMBLY
You will need 6 Candelabra bulbs.40 Watts recommended
60 Watts max. Bulb not included.
*Due to the delicate of this design,you may need to manually bend the leaves as the intended design is to have a smooth pattern of leaves.
FIRST LEAF ASSEMBLY
SECOND LEAF ASSEMBLY
THIRD LEAF ASSEMBLY
FOURTH LEAF ASSEMBLY
BY USING SLIGHT PRESSURE FLATTEN
THE LEAVES BY PUSHING THEM
IN A UPWARD DIRECTION.
FINIAL
NOTICE: FOR REPLACING THE BULB, PLEASE UNSCREW THE LEAF ASSEMBLY AS SHOWN ABOVE
2018/11

Public link updated
The public link to your chat has been updated.
Advertisement