VSP 3600 User Manual

VSP 3600 User Manual
VSP 3600
User Manual
 Manual #: RGB-RD-UM-V3600 E001
 Revision: V1.1
VSP 3600
User Manual
1
VSP 3600·User Manual
Thank you for choosing our products!
In order to allow you to learn how to use the video processor quickly, we bring
you the detailed user manual. You can read the introduction and directions
before using the video processor, please read all the information we provide
carefully to use our products correctly.
Copyright
©2015 All rights are reserved by RGBLINK.
This document is done independently by Xiamen RGBlink Science & Technology
Co.,LTD. No part can be copied, reproduced or translated without permission.
Notice
RGBlink provides this manual ―as is‖ without warranty of any kind, no matter
expressed or implied, including but not limited to the implied warranties or
merchantability and fitness for a particular purpose. RGBlink may make
improvements or changes to the products and the programs described in this
publication at any time without notice.
This publication would contain technical inaccuracies or typographical errors.
Changes are periodically made to the information in this publication; these
changes are incorporated in new editions of this publication.
Federal Communications Commission (FCC)
Statement
This equipment has been tested and found to comply with the limits for a class A
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses and
radiates radio frequency energy and, if not installed or used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area may cause harmful interference,
in which case the user will be responsible for correcting any interference.
Guarantee and Compensation
VSP 3600
User Manual
2
RGBlink provides a guarantee related to perfect manufacturing as part of the
legally stipulated terms of guarantee. On receipt, the purchaser must
immediately inspect all delivered goods for damage incurred during
transportation, as well as for material and manufacturing faults. Please
complain to RGBlink by written notice.
The period of guarantee begins from the date of transfer of risks, in the case of
special systems and software on the date of commissioning, at latest 30 days
after the transfer of risks. In the event of justified notice of compliant, RGBlink can
repair the fault or provide a replacement at its own discretion within an
appropriate period. If this measure proves to be impossible or unsuccessful, the
purchaser can demand a reduction in the purchase price or cancellation of the
contract. All other claims, in particular those relating to compensation for direct or
indirect damage, and also damage attributed to the operation of software as well
as to other service provided by RGBlink, being a component of the system or
independent service, will be deemed invalid provided the damage is not proven to
be attributed to the absence of properties guaranteed in writing or due to the
intent or gross negligence or part of RGBlink.
If the purchaser or a third party carries out modifications or repairs on goods
delivered by RGBlink, or if the goods are handled incorrectly, in particular if the
systems are commissioned operated incorrectly or if, after the transfer of risks,
the goods are subject to influences not agreed upon in the contract, all
guarantee claims of the purchaser will be rendered invalid. Not included in the
guarantee coverage are system failures which are attributed to programs or
special electronic circuitry provided by the purchaser, e.g. interfaces. Normal
wear as well as normal maintenance are not subject to the guarantee provided
by RGBlink either.
The environmental conditions as well as the servicing and maintenance
regulations specified in this manual must be complied with the customer.
Trademark
Brand and product names mentioned in this manual may be trademarks,
registered trademarks or copyrights of their respective holders. All brand and
product names mentioned in this manual serve as comments or examples and
are not to be understood as advertising for the products or their manufactures.
VSP 3600
User Manual
3
Company Address
Xiamen RGBlink Science & Technology Co., Ltd.
Headquarter: S603~604 Weiye Building Torch Hi-Tech Industrial
Development Zone Xiamen, Fujian Province, P.R.C
Shenzhen office: Floor 11, A1 Building, Baiwang R&D Building, Shahe
West Road, Xili Town, Nanshan District, Shenzhen, Guangdong Province,
P.R.C
Beijing office: No. 2702, Sino-Light Building Tower B, Wang-Jing East
Road, Chaoyang District, Beijing, P.R.C
Shanghai office: East Building F2, No. 88 Qinjiang Road, Shanghai,
P.R.C




Tel: +86-592-5771197
Fax: +86-592-5771202
Customer Hotline: 4008-592-315
Websites:

~ http://www.rgblink.com
~ http://www.rgblink.cn
E-mail: [email protected]
VSP 3600
User Manual
4
Operators Safety Summary
The general safety information in this summary is for operating personnel.
Do Not Remove Covers or Panels
There are no user-serviceable parts within the unit. Removal of the top cover will
expose dangerous voltages. To avoid personal injury, do not remove the top
cover. Do not operate the unit without the cover installed.
Power Source
This product is intended to operate from a power source that will not apply more
than 230 volts rms between the supply conductors or between both supply
conductor and ground. A protective ground connection by way of grounding
conductor in the power cord is essential for safe operation.
Grounding the Product
This product is grounded through the grounding conductor of the power cord. To
avoid electrical shock, plug the power cord into a properly wired receptacle
before connecting to the product input or output terminals. A protective-ground
connection by way of the grounding conductor in the power cord is essential for
safe operation.
Use the Proper Power Cord
Use only the power cord and connector specified for your product. Use only a
power cord that is in good condition. Refer cord and connector changes to
qualified service personnel.
Use the Proper Fuse
To avoid fire hazard, use only the fuse having identical type, voltage rating, and
current rating characteristics. Refer fuse replacement to qualified service
personnel.
Do Not Operate in Explosive Atmospheres
To avoid explosion, do not operate this product in an explosive atmosphere.
VSP 3600
User Manual
5
Terms In This Manual and Equipment Marking
WARNING
Highlights an operating procedure, practice, condition, statement, etc,
which, if not strictly observed, could result in injury or death of
personnel.
Note
Highlights an essential operating procedure,
condition or statement.
CAUTION
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
VSP 3600
User Manual
6
Change History
The table below lists the changes to the Video Processor User Manual.
Format
Time
ECO#
1.0
2012-08-08
0000
1.1
2013-07-08
0001
VSP 3600
Description
Release
1. Update the front panel.
2. Update the back panel.
3. Update the menu.
4. Update the PC software.
User Manual
Principal
BIN
Vira
7
CONTENT
CONTENT .......................................................................................... 8
1. Introduction .................................................................................15
Chapter Structure ....................................................................................... 16
How to Use This Guide ................................................................................ 17
Terms and Definitions ................................................................................. 18
System Overview ........................................................................................ 23
Application Question .................................................................................. 24
2. Hardware Orientation .................................................................25
In This Chapter ............................................................................................ 25
VSP 3600 Back Panel ................................................................................... 26
INPUT .................................................................................................................. 26
13~16: DVI Input ............................................................................................... 26
5~8: DVI Loop Out ............................................................................................ 27
OUTPUT ............................................................................................................. 27
9~12: VGA Output ............................................................................................. 27
17~20: DVI Output ............................................................................................ 27
CONT .................................................................................................................. 27
1.
Dial Switch ................................................................................................ 27
2. 10/100M Interface ......................................................................................... 28
3. USB Interface ................................................................................................ 28
VSP 3600
User Manual
8
8. RS232 Interface ............................................................................................ 28
Switch and Power.............................................................................................. 28
21. Switch ........................................................................................................... 28
22. Power Port ................................................................................................... 28
VSP 3600 Front Panel .................................................................................. 29
Sources ............................................................................................................... 29
Layer .................................................................................................................... 29
Transition ............................................................................................................ 29
Outputs ................................................................................................................ 29
Layer Functions ................................................................................................. 30
Effects.................................................................................................................. 30
Custom Adjustments ......................................................................................... 30
Control Button .................................................................................................... 30
LCD Panel .......................................................................................................... 30
Knob .................................................................................................................... 30
VSP 3600 Front Panel Button Part............................................................... 31
Sources Part ...................................................................................................... 33
Layer Part ........................................................................................................... 33
Layer Functions Part ......................................................................................... 34
Outputs Part ....................................................................................................... 35
Transition Part .................................................................................................... 36
Effects Part ......................................................................................................... 37
VSP 3600
User Manual
9
Custom Adjustments Part ................................................................................ 47
Control Button Part............................................................................................ 51
Knob Part ............................................................................................................ 51
LCD Panel Part .................................................................................................. 51
3. Hardware Installation .................................................................52
In This Chapter ............................................................................................ 52
Safety Precautions ...................................................................................... 53
Unpacking and Inspection ........................................................................... 53
Site Preparation .......................................................................................... 53
4. Menu Orientation ........................................................................54
In This Chapter ............................................................................................ 54
MENU ......................................................................................................... 55
DEV INFO .................................................................................................... 56
INPUT CONFIG ............................................................................................ 56
OUTPUT CONFIG ......................................................................................... 58
LAYER CONFIG ............................................................................................. 59
VIEW ........................................................................................................... 60
SYSTEM ....................................................................................................... 60
RESET .......................................................................................................... 61
5. Communication Software Guideline .......................................62
In This Chapter ............................................................................................ 62
VSP 3600
User Manual
10
Install Software ........................................................................................... 63
Run Software .............................................................................................. 67
Language Selection .......................................................................................... 67
Connection ......................................................................................................... 68
Mode Settings ....................................................................................................71
Output Settings ..................................................................................................71
Alpha Settings ....................................................................................................71
Alpha Speed Settings ....................................................................................... 72
Color Key Settings ............................................................................................ 72
Devices Settings ................................................................................................ 73
Input Port Settings ............................................................................................. 74
Scale Settings .................................................................................................... 74
Crop Settings ..................................................................................................... 75
Display Mode ..................................................................................................... 75
Mirror Image and Test Pattern Settings ......................................................... 75
Rotate Settings .................................................................................................. 76
Layout .................................................................................................................. 78
Load User Mode ................................................................................................ 81
Save User Mode ................................................................................................ 81
Split Screen Mode ............................................................................................. 82
CUT ..................................................................................................................... 83
Take ..................................................................................................................... 84
VSP 3600
User Manual
11
Input Config ........................................................................................................ 84
Control ................................................................................................................. 86
IP Setting ............................................................................................................ 86
Factory reset ...................................................................................................... 87
Language ............................................................................................................ 87
Management ...................................................................................................... 87
Advanced Test ................................................................................................... 87
Script ................................................................................................................... 88
Load Customer Script ....................................................................................... 88
Save Customer Script ....................................................................................... 88
Version Explain .................................................................................................. 88
About ................................................................................................................... 88
Image Display Toolbar ...................................................................................... 88
Information Toolbar ........................................................................................... 89
How to control processor through RS232? .................................................. 90
How to control processor with console software by USB? .......................... 92
6. System Setup and Operations .................................................95
In This Chapter ............................................................................................ 95
How to determine equipment run normally?.............................................. 96
How to change the output resolution? ....................................................... 98
How to edit and define program? ............................................................... 99
How to edit and define layer? ................................................................... 100
VSP 3600
User Manual
12
How to add layer? ..................................................................................... 101
How to clear layer? ................................................................................... 102
How to edit and define outputs? .............................................................. 103
How to scale the layer image .................................................................... 105
How to crop the layer image? ................................................................... 106
How to set the position of layer image? ................................................... 107
How to set independent outputs in PIP effects? ....................................... 108
How to achieve split function? .................................................................. 112
How to set picture size in split effects? ..................................................... 114
How to rotate layer image? ....................................................................... 115
How to achieve color extraction? .............................................................. 116
How to achieve LOGO overlay? ................................................................. 117
How to achieve subtitles superposition?................................................... 118
How to save the current setting parameters? ........................................... 119
How to recall the saved parameters? ........................................................ 121
7. Common Questions and Solution ......................................... 123
In This Chapter .......................................................................................... 123
No Output in Large Screen ........................................................................ 124
Confirm if there are any input singles ..........................................................124
Confirm if single output ...................................................................................124
Large Screen Output Flash Point ............................................................... 124
Confirm if preview output is normal ..............................................................124
VSP 3600
User Manual
13
Large Screen only Display Part of the Image.............................................. 124
Signal need to scale........................................................................................124
No Display in the Second Half Part of Large Screen ................................... 125
Resolution is inadequate ................................................................................ 125
All Key Lights Light Simultaneously ........................................................... 125
Check if dial switches are normal ................................................................. 125
A.Specification .............................................................................. 126
B.Contact Information ..................................................................... 128
C. Upgrading Software ................................................................. 129
Main board MCU program upgrading steps .............................................. 129
VSP 3600
User Manual
14
1. Introduction
This chapter is designed to introduce you to the VSP 3600 User Manual. Areas to
be covered are:

Chapter Structure

How to Use This Guide

Terms and Definitions

System Overview

Application Questions
VSP 3600
User Manual
15
1. Introduction
Chapter Structure
Chapter Structure
The following chapters provide instructions for all aspects of VSP 3600
operations:
Chapter 1 Introduction
Chapter 2 Hardware Orientation
Chapter 3 Hardware Installation
Chapter 4 Menu Orientation
Chapter 5 Communication Software Guideline
Chapter 6 System Setup and Operations
Chapter 7 Common Questions and Solution
Appendix A Specification
Appendix B Contact information
Appendix C Software Upgrade
VSP 3600
User Manual
16
1.Introduction
How to Use This Guide
How to Use This Guide
Following are important tips for streamlining your use of this User Manual in
its electronic ―PDF‖ form.
Navigating
Use Acrobat Reader’s ―bookmarks‖ to navigate to the desired location. All
chapter files have the same bookmark structure for instant navigation to
any section. Please note:
 Extensive hyperlinks are provided within the chapters.
 Use Acrobat’s ―Go to Previous View‖ and ―Return to next View‖
buttons to trace your complete navigational path.
 Use the ―Previous Page‖ and ―Next Page‖ buttons to go to the previous
or next page within a file.
 Use Acrobat’s extensive search capabilities, such as the ―Find‖ tool
and ―Search Index‖ tool to perform comprehensive searches as required.
Table of Contents and Index
Use the Table of Contents bookmarks to navigate a desired topic. Click
any item to instantly jump to that section of the guide. You can also use
the Index to jump to specific topics within a chapter. Each page number in
the Index is a hyperlink.
General Operations
To ensure trouble-free operation, please follow all procedures as listed
below:
 For detailed installation instructions, refer to chapter 3 ―Hardware
Installation‖ on page 52.
 For communication software control guide, refer to Chapter 5,
―Communication Software Control Guide‖ on page 62.
 For system setup and operations, refer to Chapter 6, ―System Setup
and Operations‖ on page 95.
Should you have any questions regarding the installation or operation of
VSP 3600, please consult with the factory. Refer to Appendix B on page
128 for ―Contact Information‖.
VSP 3600
User Manual
17
1. Introduction
Terms and Definitions
Terms and Definitions
The following terms and definitions are used throughout this guide;
 “ASCII”: American Standard for Information Interchange. The standard
code consisting of 7-bit coded characters (8 bits including parity check)
used to exchange information between data processing systems, data
communication systems, and associated equipment. The ASCII set
contains control characters and graphic characters.
 “Aspect ratio”: The relationship of the horizontal dimension to the
vertical dimension of an image. In viewing screens, standard TV is 4:3,
or 1.33:1; HDTV is 16:9, or 1.78:1. Sometimes the ―:1‖ is implicit,
making TV = 1.33 and HDTV = 1.78.
 “AV”: Audio visual, or audio video.
 A “Background” is an unscaled source, typically originating from a
computer. Abackground source appears at the system’s lowest priority
— visually in back of all other sources.
 “Baudrate”:Named of J.M.E. Baudot, the inventor of the Baudot
telegraph code. The number of the electrical oscillations per second,
called baud rate. Related to, but not the same as, transfer rate in bits
per second (bps).
 “Blackburst”: The video waveform without the video elements. It
includes the vertical sync, horizontal sync, and the chroma burst
information. Blackburst is used to synchronize video equipment to
align the video output. One signal is normally used to set up an entire
video system or facility. Sometimes it is called House sync.
 “BNC”: Bayonet Neill-Concelman. A cable connector used extensively
in television and named for its inventors. A cylindrical bayonet
connector that operates with a twist-locking motion. To make the
connection, align the two curved grooves in the collar of the male
connector with the two projections on the outside of the female collar,
push, and twist. This allows the connector to lock into place without
tools.
 “Brightness”: Usually refers to the amount or intensity of video light
produced on a screen without regard to color. Sometimes called ―black
level.
 ―CAT 5‖: Category 5. Describes the network cabling standard that
consists of four unshielded twisted pairs of copper wire terminated by
RJ-45 connectors. CAT 5 cabling supports data rates up to 100 Mbps.
CAT 5 is based on the EIA/TIA 568 Commercial Building
Telecommunications Wiring Standard.
 “Color bars”: A standard test pattern of several basic colors (white,
yellow, cyan, green, magenta, red, blue, and black) as a reference for
system alignment and testing. In NTSC video, the most commonly
used color bars are the SMPTE standard color bars. In PAL video, the
most commonly used color bars are eight full field bars. In the
computer, the most commonly used color bars are two rows of
reversed color bars.
 “Color burst”: In color TV systems, a burst of subcarrier frequency
located on the back porch of the composite video signal. This serves
as a color synchronizing signal to establish a frequency and phase
reference for the chroma signal. Color burst is 3.58 MHz for NTSC and
4.43 MHz for PAL.
 “Color temperature”: The color quality, expressed in degrees
Kelvin(K), of a light source. The higher the color temperature, the bluer
the light. The lower the temperature, the redder the light. Benchmark
VSP 3600
User Manual
18
1. Introduction
Terms and Definitions










color temperature for the A/V industry include 5000°K, 6500°K, and
9000°K.
“Contrast ratio”: The radio of the high light output level divided by the
low light output level. In theory, the contrast radio of the television
system should be at least 100:1, if not 300:1. In reality, there are
several limitations. In the CRT, light from adjacent elements
contaminate the area of each element. Room ambient light will
contaminate the light emitted from the CRT. Well-controlled viewing
conditions should yield a practical contrast ratio of 30:1 to 50:1.
“DVI”: Digital Visual Interface. The digital video connectivity standard
that was developed by DDWG (Digital Display Work Group). This
connection standard offers two different connectors: one with 24 pins
that handles digital video signals only, and one with 29 pins that
handles both digital and analog video.
“EDID”: Extended Display Identification Data – EDID is a data structure
used to communicate video display information, including native
resolution and vertical interval refresh rate requirements, to a source
device. The source device will then output the optimal video format for
the display based on the provided EDID data, ensuring proper video
image quality. This communication takes place over the DDC – Display
Data Channel.
“Ethernet”: A Local Area Network (LAN) standard officially known as
IEEE 802.3. Ethernet and other LAN technologies are used for
interconnecting computers, printers, workstations, terminals, servers,
etc. within the same building or campus. Ethernet operates over
twisted pair and over coaxial cable at speeds starting at 10Mbps. For
LAN interconnectivity, Ethernet is physical link and data link protocol
reflecting the two lowest layers of the OSI Reference Model.
“Frame”: In interlaced video, a frame is one complete picture. A video
frame is made up of two fields, or two sets of interlaced lines. In a film,
a frame is one still picture of a series that makes up a motion picture.
“Gamma”: The light output of a CRT is not linear with respect to the
voltage input. The difference between what you should have and what
is actually output is known as gamma.
“HDMI” - High – Definition Multimedia Interface: An interface used
primarily in consumer electronics for the transmission of
uncompressed high definition video, up to 8 channels of audio, and
control signals, over a single cable. HDMI is the de facto standard for
HDTV displays, Blu-ray Disc players, and other HDTV electronics.
Introduced in 2003, the HDMI specification has gone through several
revisions.
“HDSDI”: The high-definition version of SDI specified in SMPTE-292M.
This signal standard transmits audio and video with 10 bit depth and
4:2:2 color quantization over a single coaxial cable with a data rate of
1.485 Gbit/second. Multiple video resolutions exists including
progressive 1280x720 and interlaced 1920x1080 resolution. Up to 32
audio signals are carried in the ancillary data.
“JPEG” (Joint photographic Expects Group): Commonly used
method of lossy compression for photographic images using a discreet
cosine transfer function. The degree of compression can be adjusted,
allowing a selectable tradeoff between storage size and image quality.
JPEG typically achieves 10:1 compression with little perceptible loss in
image quality. Produces blocking artifacts.
“MPEG”: Motion Picture Expect Group. A standard committee under
the auspices of the International Standards Organization working on
VSP 3600
User Manual
19
1. Introduction
Terms and Definitions








algorithm standards that allow digital compression, storage and
transmission of moving image information such as motion video,
CD-quality audio, and control data at CD-ROM bandwidth. The MPEG
algorithm provides inter-frame compression of video images and can
have an effective compression rate of 100:1 to 200:1.
“NTSC”: The color video standard used in North America and some
other parts of the world created by the National Television Standards
Committee in the 1950s. A color signal must be compatible with
black-and-white TV sets. NTSC utilizes an interlaced video signals,
525 lines of resolution with a refresh rate of 60 fields per second (60
Hz). Each frame is comprised of two fields of 262.5 lines each, running
at an effective rate of 30 frames per second.
“Operator”: Refers to the person who uses the system.
“PAL”: Phase Alternate Line. A television standard in which the phase
of the color carrier is alternated from line to line. It takes four full
pictures (8 fields) for the color-to-horizontal phase relationship to
return to the reference point. This alternation helps cancel out phase
errors. For this reason, the hue control is not needed on a PAL TV set.
PAL, in many transmission forms, is widely used in Western Europe,
Australia, Africa, the Middle East, and Micronesia. PAL uses 625-line,
50-filed (25 fps) composite color transmission system.
“PIP”: Picture-in-Picture. A small picture within a larger picture created
by scaling down one of the images to make it smaller. Each picture
requires a separate video source such as a camera, VCR, or computer.
Other forms of PIP displays include Picture-by-Picture (PBP) and
Picture-with-Picture (PWP), which are commonly used with 16:9
aspect display devices. PBP and PWP image formats require a
separate scaler for each video window.
“Polarity”: The positive and negative orientation of a signal. Polarity
usually refers to the direction or a level with respect to a reference (e.g.
positive sync polarity means that sync occurs when the signal is going
in the positive direction).
“RJ-45”: Registered Jack-45. A connector similar to a telephone
connector that holds up to eight wires, used for connecting Ethernet
devices.
―RS-232”: An Electronic Industries Association (EIA) serial digital
interface standard specifying the characteristics of the communication
path between two devices using either DB-9 or DB-25 connectors.
This standard is used for relatively short-range communication and
does not specify balanced control lines. RS-232 is a serial control
standard with a set number of conductors, data rate, word length, and
type of connector to be used. The standard specifies component
connection standards with regard to the computer interface. It is also
called RS-232-C, which is the third version of the RS-232 standard,
and is functionally identical to the CCITT V.24 standard.
“Saturation”: Chroma, chroma gain. The intensity of the color, or the
extent to which a given color in any image is free from white. The less
white in a color, the truer the color or the greater its saturation. On a
VSP 3600
User Manual
20
1. Introduction
Terms and Definitions








display device, the color control adjusts the saturation. Not to be
confused with the brightness, saturation is the amount of pigment in a
color, and not the intensity. Low saturation is like adding white to the
color. For example, a low-saturated red looks pink.
“Scaling”: A conversion of a video or computer graphic signal from a
starting resolution to a new resolution. Scaling from one resolution to
another is typically done to optimize the signal for input to an image
processor, transmission path or to improve its quality when presented
on a particular display.
“SDI”: Serial Digital Interface. The standard based on a 270 Mbps
transfer rate. This is a 10-bit, scrambled, polarity independent interface
with common scrambling for both component ITU-R 601 and
composite digital video and four channels of (embedded) digital audio.
“Seamless Switching”: A feature found on many video switchers. This
feature causes the switcher to wait until the vertical interval to switch.
This avoid a glitch (temporary scrambling) which normally is seen
when switching between sources.
“SMPTE”: Society of Motion Picture and Television Engineers. A global
organization, based in the United States, that sets standards for
baseband visual communications. This includes film as well as video
and television standards.
“S-video”: A composite video signal separated into the luma (―Y‖ is for
luma, or black and white information; brightness) and the chroma (―C‖
is an abbreviation for chroma, or color information).
“Sync”: Synchronization. In video, sync is a means of controlling the
timing of an event with respect to other events. This is accomplished
with timing pulses to insure that each step in a process occurs at the
correct time. For example, horizontal sync determines exactly when to
begin each horizontal scan line. Vertical sync determines when the
image is to be refreshed to start a new field or frame. There are many
other types of sync in video system.(Also known as ―sync signal‖ or
―sync pulse.‖)
“TCP/IP”: Transmission Control Protocol/Internet Protocol. The
communication protocol of the Internet. Computers and devices with
direct access to the Internet are provided with a copy of the TCP/IP
program to allow them to send and receive information in an
understandable form.
“USB”: Universal Serial Bus. USB was developed by seven PC and
telecom industry leaders (Compaq, DEC, IBM, Intel, Microsoft, NEC,
and Northern Telecom). The goal was easy plug-and-play expansion
outside the box, requiring no additional circuit cards. Up to 127
external computer devices may be added through a USB hub, which
may be conveniently located in a keyboard or monitor. USB devices
VSP 3600
User Manual
21
1. Introduction
Terms and Definitions




can be attached or detached without removing computer power. The
number of devices being designed for USB continues to grow, from
keyboards, mice, and printers to scanners, digital cameras, and ZIP
drives.
“VESA”: Video Electronics Standards Association. A nonprofit number
organization dedicated to facilitating and promoting personal computer
graphics through improved standards for the benefit of the end-user.
www.vesa.org
“VGA”: Video Graphics Array. Introduced by IBM in 1987, VGA is an
analog signal with TTL level separate horizontal and vertical sync. The
video outputs to a 15-pin HD connector and has a horizontal scan
frequency of 31.5 kHz and vertical frequency of 70 Hz (Mode 1, 2) and
60 Hz (Mode 3). The signal is non-interlaced in modes 1, 2, and 3 and
interlaced when using the 8514/A card (35.5 kHz, 86 Hz) in mode 4. It
has a pixel by line resolution of 640×480 with a color palette of 16 bits
and 256,000 colors.
“YCrCb”: Used to describe the color space for interlaced component
video.
“YPbPr”: Used to describe the color space for progressive-scan
(non-interlaced) component video.
VSP 3600
User Manual
22
1. Introduction
System Overview
System Overview
The VSP 3600 is a dedicated seamless Video Wall Processor and it does
have some features not found on any other models that make setup
easier, multi display windows, DSK and rotary capability. VSP 3600 offer
the advantage that when basic video wall control is not required, it can be
used for seamless switching and scaling applications, and can setup as
multi display windows with DSK effects and rotary possibility. In addition
to local control via the front panel, control can be from the Windows
Control Panel or the optional remote control panel.
The VSP 3600 is ideal for a wide range of applications requiring up to
4096*2304 resolution for multi display windows, DSK capability and
rotary of high resolution content with the highest quality. Because of the
remote control panel support and unprecedentedly super video
processing functions, VSP 3600 supports full flexibility for rental and
staging, and presentation.
VSP 3600
User Manual
23
1. Introduction
Application Question
Application Question
We offer solutions to demanding technical problems. Any application
questions, or required further information, please contact with our
Customer Support Engineers. Refer to Appendix B for contact details.
VSP 3600
User Manual
24
2. Hardware Orientation
In This Chapter
This chapter provides detailed information about the VSP 3600 hardware.
The following topics are discussed:

VSP 3600 Back Panel

VSP 3600 Front Panel

VSP 3600 Front Panel Button Part
VSP 3600
User Manual
25
2. Hardware Orientation
VSP 3600 Back Panel
VSP 3600 Back Panel
The figure below illustrates the professional interface and control signals
of VSP 3600 back panel:
NO.
INTERFACE
NO.
INTERFACE
1
Dial switch
9~12
VGA Output
2
10/100M Interface
13~16
DVI Input
3
USB Interface
17~20
DVI Output
4
RS232 Interface
21.22
Switch and Power
5~8
DVI Loop Out
INPUT
4 DVI input by DVI-I port.
13~16: DVI Input
DVI1/2/3/4input. Support DVI from high definition player, DVD, PC.
Through DVI-I port.
Input resolution:
SMPTE:1080P50, 1080P59.94/60,720p50,720p59.94/60;
VESA:
800×600×60/75/85Hz,1024×768×60/75/85Hz,1280×768×60/75/80Hz,128
0x960x60/85Hz,1280×1024×60/75/85Hz,1360x768x60Hz,1366x768x60H
z,1400x1050x60Hz,1440x900x60Hz,1680x1050x60Hz,1600×1200×60Hz
,1920x1200x60Hz,1920×1080×50/59.94/60Hz, 2048x1152x60Hz;
VSP 3600
User Manual
26
2. Hardware Orientation
VSP 3600 Back Panel
Note
DVI1~4 applies the standard DVI-I port, and is
compatible with HDMI1.3.
5~8: DVI Loop Out
DVI loop out, can connect the next level VSP 3600 or the device with DVI
loop out.
OUTPUT
9~12: VGA Output
VGA output. VGA is output. It supports signal output or monitor of display
system, such as displayer, projector with VGA input.
Output resolution:
VESA:
1024×768×60Hz,1280×720×60Hz,1280×768×60Hz,1280×1024×60Hz,
1360x768x60Hz,1366x768x60Hz,1400x1050x60Hz,1440x900x60Hz,
1600×1200×60Hz,1680x1050x60Hz,1920×1080×60Hz,1920x1200x60H,
2048x1152x60Hz;
17~20: DVI Output
DVI output. HDMI or DVI are output. It can connect to display system or
LED screen through sending card.
Output resolution:
VESA:
1024×768×60Hz,1280×720×60Hz,1280×768×60Hz,1280×1024×60Hz,
1360x768x60Hz,1366x768x60Hz,1400x1050x60Hz,1440x900x60Hz,
1600×1200×60Hz,1680x1050x60Hz,1920×1080×60Hz,1920x1200x60H,
2048x1152x60Hz.
CONT
1. Dial Switch
VSP 3600
User Manual
27
2. Hardware Orientation
VSP 3600 Back Panel
Switch down and it works normally. Switch up and it is ready for update.
2. 10/100M Interface
Remote control port for software.
3. USB Interface
Remote control port for software.
8. RS232 Interface
Remote control port for software.
Switch and Power
21. Switch
Switch on. It means power on;
Switch off. It means power off.
22. Power Port
AC 90-264V 50/60Hz IEC-3 power interface
VSP 3600
User Manual
28
2. Hardware Orientation
VSP 3600 Front Panel
VSP 3600 Front Panel
Brief introduction of its front panel as the following picture:
NO.
NO.
1
SOURCES
6
EFFECTS
2
LAYER
7
CUSTOM ADJUSTMENTS
3
TRANSITION
8
Control Button
4
OUTPUTS
9
LCD Panel
5
LAYER FUNCTIONS
10
Knob
Sources
VSP 3600 supports 4 ways of program, corresponding buttons are1, 2, 3,
4.
For details, please confer to:Sources Part.
Layer
VSP 3600 supports 4 layers operation, you can program A, B, C, D with
buttons in LAYER FUNCTIONS.
For details, please confer to: Layer Part.
Transition
Used for seamless cutting and multi switch effects.
For details, please confer to: Transition Part.
Outputs
Buttons DVI1, DVI2, DVI3, DVI4 are corresponding to VGA and DVI
VSP 3600
User Manual
29
2. Hardware Orientation
VSP 3600 Front Panel
output 1, 2, 3, 4 interface. Program the output can output multi signals.
For details, please confer to: Outputs Part.
Layer Functions
Buttons LAYER FUNCTIONS is used for program layer A, B, C, D.
For details, please confer to: Layer Functions Part.
Effects
Used for operate rotate, cascade, multi image, DSK effects.
For details, please confer to: Effects Part.
Custom Adjustments
Used for signal edit, save, output format selection, scale and so on.
For details, please confer to: Custom Adjustments Part.
Control Button
NEXT: push the button for current subordinate option or confirm;
MENU: push the button to go back to superior option;
For details, please confer to: Control Button Part
LCD Panel
Interactive menu for display button and communication;
For details, please confer to: LCD Panel Part
Knob
Spin the knob to adjust the option menu shown on the LCD panel;
For details, please confer to: Knob Part
VSP 3600
User Manual
30
2. Hardware Orientation
VSP 3600 Front Panel Button Part
VSP 3600 Front Panel Button Part
Plug power and push to ON. LCD module on the front panel will show
RGBLINK and go into self verification before it load last setting config and
send processed image to the target monitor. For the first setup, DVI input
is default source. With front panel keyboard, user can operate UVM 360
through the menus on LCD panel.
VSP 3600 front panel as
shown in figure:
RGBLink
视诚科技
亮彩系列
AVDSP Series VSP 3600
Initializing
Please wait...
IN1:1024 x768 x60
IN2:1280 x768 x60
IN3: 1280 x1024 x60
IN4: 1600 x1200 x60
OUT:1920x1080x60
IP:192.168.0.100
视诚科技
VSP 3600
VSP 3600
User Manual
RGBlink
VER 3.5
31
2. Hardware Orientation
VSP 3600 Front Panel Button Part
Into the cycle:
When in to the cycle, it shows the current input format, preview, the
current output format, the current software information, the current device
serial number. User have the device serial number will acquire more
effective service and support.
5 seconds
5 seconds
IN1:1024 x768 x60
IN2:1280 x768 x60
视诚科技
VSP3600
IN3: 1280 x1024 x60
IN4: 1600 x1200 x60
RGBlink
VER 3.5
VSP 3600
Out:1920x1080x60
IP:192.168.0.100
User Manual
32
2. Hardware Orientation
VSP 3600 Front Panel Button Part
Sources Part
VSP 3600 supports 4 ways of program, corresponding buttons are 1, 2, 3,
4.
For details, please confer to: How to edit and define program?
1: Channel 1. The light lights means it is selected.
2: Channel 2. The light lights means it is selected.
3: Channel 3. The light lights means it is selected.
4: Channel 4. The light lights means it is selected.
Layer Part
VSP 3600 supports 4 layers processing. Buttons A, B, C, D are
corresponding to layer 1, 2, 3, 4. Buttons light mean they are
selected;
For details, please confer to: How to edit and define layer?
VSP 3600
User Manual
33
2. Hardware Orientation
VSP 3600 Front Panel Button Part
A: Layer A. It lights means being selected and brinks means being
programmed;
B: Layer B. It lights means being selected and brinks means being
programmed;
C: Layer C. It lights means being selected and brinks means being
programmed;
D: Layer D. It lights means being selected and brinks means being
programmed;
ALL: It lights means all layers being selected.
Push A-D button, LCD panel will display as follows ( select A):
SELECT LAYER:
LAYER A
Layer Functions Part
All LAYER FUNCTIONS in this part are used to program the function
of output layer;
Freeze: Push it to light, and the current layer on the screen will freeze.
Push it to light off, and the current layer will be alive; Current layer is
VSP 3600
User Manual
34
2. Hardware Orientation
VSP 3600 Front Panel Button Part
corresponding with the current brink layer A, B, C, D.
Full screen: Full screen button. Push it and the current layer will full
screen display. Current layer is corresponding with the current brink
layer A, B, C, D.
Program: Push it to light and program the current layer with input 1, 2, 3, 4,.
Current layer is corresponding with the current brink layer A, B, C, D. For
details, please refer to: How to edit and define program?
Add Layer: Push it to light and add layer to the current output. Current
output is corresponding with the current brink output button 1, 2, 3, 4.
For details, please refer to: How to add layer?
Clear Layer: Push it to light and clear layer to the current output.
Current output is corresponding with the current brink output button 1,
2, 3, 4. For details, please refer to: How to clear layer?
Outputs Part
VSP 3600 supports 4 outputs. OUTPUTS buttons DVI1, DVI2, DVI3,
DVI4 are corresponding to the output ports in rear panel, DVI1/VGA1,
DVI2/VGA2, DVI3/VGA3, DVI4/VGA4. Button lights show its
corresponding output are selected. For details, please refer to: How
to edit and define outputs?
VSP 3600
User Manual
35
2. Hardware Orientation
VSP 3600 Front Panel Button Part
Note
OUTPUTS Button DVI1 corresponding
DVI1/VGA1 is the default as program output.
DVI1: It is corresponding to DVI 1/ VGA 1 on back panel. It lights means
being selected;
DVI2: It is corresponding to DVI 2/ VGA 2 on back panel. It lights means
being selected;
DVI3: It is corresponding to DVI 3/ VGA 3 on back panel. It lights mean
being selected;
DVI4: It is corresponding with DVI 4/ VGA 4 on back panel. It lights means
being selected;
Push 1-4, LCD panel will display as follows (select output: output 1):
SELECT OUTPUT:
OUTPUT 1
Transition Part
CUT: Seamless cutting button, press the button to switch Preview out to
Program;
CUT SWITCH TO:
OUTPUT 3
VSP 3600
User Manual
36
2. Hardware Orientation
VSP 3600 Front Panel Button Part
Note
OUTPUTS button DVI1 corresponding
DVI1/VGA1, it is default program; OUTPUTS
button DVI2~DVI4 corresponding DVI2/VGA2,
DVI3/VGA3,DVI4/VGA4, they are default
preview.
TAKE: Seamless effects, press the button to switch Preview to Program;
TAKE SWITCH TO:
OUTPUT 3
Note
OUTPUTS button DVI1 corresponding
DVI1/VGA1, it is default program; OUTPUTS
button DVI2~DVI4 corresponding DVI2/VGA2,
DVI3/VGA3, DVI4/VGA4, they are default
preview.
Effects Part
PIP: PIP effects button, press it and it lights. It can be configurated
arbitrarily in outputs when equipment is on working, that is VSP 3600 4
outputs are independent.
For details, please refer to: How to edit and define outputs, How to set
independent outputs in PIP effects.
VSP 3600
User Manual
37
2. Hardware Orientation
VSP 3600 Front Panel Button Part
VSP 3600 provides 13 kinds of modes, LCD displays:
LAYOUT
*MODE:
1:
>
Mode 1: Signal picture mode
Mode 2: Level double-picture mode
Mode 3: Vertical double-picture mode
VSP 3600
User Manual
38
2. Hardware Orientation
VSP 3600 Front Panel Button Part
Mode 4: Level three pictures mode
Mode 5: Vertical three pictures mode
Mode 6: Level two pictures two sides and middle one picture - space bar
centering mode
VSP 3600
User Manual
39
2. Hardware Orientation
VSP 3600 Front Panel Button Part
Mode 7: The right of level single picture and left part vertical
double-picture mode
Mode 8: The left of level single picture and right vertical double-picture
mode
VSP 3600
User Manual
40
2. Hardware Orientation
VSP 3600 Front Panel Button Part
Mode 9: Four pictures field word mode
Mode 10: Four pictures level mode
Mode 11: Four pictures vertical mode
VSP 3600
User Manual
41
2. Hardware Orientation
VSP 3600 Front Panel Button Part
Mode 12: The right of level single picture and left vertical three screen
mode
Mode 13: The left of level single picture and right vertical three screen
mode
Note
All above effect systems are default button
DVI1 corresponding to outputs DVI1 / VGA1
output display effect.
Split: Split effect button, press it and it lights, it can achieve video wall
cascade in the form of output split, that is VSP 3600 4 outputs are in the
form of output split. Single equipment can be set at max,: 2048x4*1152 or
2048*1152x4 or 2048x2*1152x2, it is mainly suitable for LED screen
VSP 3600
User Manual
42
2. Hardware Orientation
VSP 3600 Front Panel Button Part
users.
For details, please refer to: How to achieve split function, How to set
picture size in split effects?
VSP 3600 provides 7 kinds of split modes, LCD displays:
SPLIT SCREEN
*HORIZONTAL 1/2
>
Split Mode 1: HORIZONTAL 1/2
Split Mode 2: VERTICAL 1/2
VSP 3600
User Manual
43
2. Hardware Orientation
VSP 3600 Front Panel Button Part
Split Mode 3: FIELD GLYPH
Split Mode 4: HORIZONTAL 1/4
Split Mode 5: VERTICAL 1/4
VSP 3600
User Manual
44
2. Hardware Orientation
VSP 3600 Front Panel Button Part
Split Mode 6: 2 IN 3 OUT
Split Mode 7: 2 IN 3 OUT
Rotate: Rotate effects button, press it and it lights, edit the current
layer to realize the layer image clockwise and anti-clockwise rotation.
Current layer are layer button A, B, C, D. For details, please refer to:
How to rotate layer image?
Layer A Rotate:
Left/Right Rotate /OFF
Note
Only A layer can achieve rotation effect.
VSP 3600
User Manual
45
2. Hardware Orientation
VSP 3600 Front Panel Button Part
90 degrees counterclockwise rotation effect image:
90 degrees clockwise rotation effect image:
DSK: DSK effect button, press it and it lights, edit the current layer to
realize layer image DSK, and color extraction, LOGO overlay, subtitles
superposition function. Current layer are layer button A, B, C, D.
For details, please refer to: How to achieve color extraction, How to
achieve LOGO overlay, How to achieve subtitles superposition?
COLOR KEY
KEY ON/OFF
>>
DSK effects/color extraction effect:
VSP 3600
User Manual
46
2. Hardware Orientation
VSP 3600 Front Panel Button Part
LOGO overlay/subtitles superposition effect:
Custom Adjustments Part
VSP 3600
User Manual
47
2. Hardware Orientation
VSP 3600 Front Panel Button Part
CUSTOM ADJUSTMENTS set function shortcut button for users,
shortcut button is the most commonly used functions for users , shortcut
setting the most frequent use function for the convenience of customers
operate.
SAVE: press the key to save the user data, users can the current
operation and save in menu SAVE page, knob to SAVE TO 1 ~ 10, and
meanwhile 1, 2, 3, 4, and ALL button in SOURCES area , and DVI1,
DVI2, DVI3, DVI4 button in OUTPUTS area, Freeze lights, choose the
corresponding position and save.
SAVE TO 1 corresponding button 1 in SOURCES area;
SAVE TO 2 corresponding button 2 in SOURCES area;
SAVE TO 3 corresponding button 3 in SOURCES area;
SAVE TO 4 corresponding button 4 in SOURCES area;
SAVE TO 5 corresponding button ALL in SOURCES area;
SAVE TO 6 corresponding button DVI1 in OUTPUTS area;
SAVE TO 7 corresponding button DVI2 in OUTPUTS area;
SAVE TO 8 corresponding button DVI3 in OUTPUTS area;
SAVE TO 9 corresponding button DVI4 in OUTPUTS area;
SAVE TO 10 corresponding button Freeze in Layer Functions area;
For details, please refer to: How to save the current setting parameters?
VSP 3600
User Manual
48
2. Hardware Orientation
VSP 3600 Front Panel Button Part
SAVE
>SAVE TO 1~10
SAVE TO 1
SAVE FINISH
Load: call saving button, press it to save the user data, users can select
the specific page of the LOAD list to realize data recall, knob to adjust
Load From 1~ 10, meanwhile button 1, 2, 3, 4, and ALL in SOURCES
area, and button DVI1, DVI2, DVI3, DVI4 in OUTPUTS area and Freeze
light, choose the corresponding position and save.
LOAD FROM 1 corresponding button 1 in SOURCES area;
LOAD FROM 2 corresponding button 2 in SOURCES area;
LOAD FROM 3 corresponding button 3 in SOURCES area;
LOAD FROM 4 corresponding button 4 in SOURCES area;
LOAD FROM 5 corresponding button ALL in SOURCES area;
LOAD FROM 6 corresponding button DVI1 in OUTPUTS area;
LOAD FROM 7 corresponding button DVI2 in OUTPUTS area;
LOAD FROM 8 corresponding button DVI3 in OUTPUTS area;
LOAD FROM 9 corresponding button DVI4 in OUTPUTS area;
LOAD FROM 10 corresponding button Freeze in Layer Functions area.
For details, please refer to: How to recall and save parameters?
LOAD
> LOAD FROM 1~10
LOAD FROM 1
LOAD FINISH
Finished!l
VSP 3600
User Manual
49
2. Hardware Orientation
VSP 3600 Front Panel Button Part
Out: Output format button, press the button, key lights, and enter the
current output format, user can select different output formats by using
the left-right knob.
Scale: Scale button, press the button, key lights, the user can adjust the
size of selected layer image currently by using the up-down and leftright knob. It is subject to button A, B, C, D key light when select the
current layer. For details, please refer to: How to scale the layer image?
SIZE
SIZE
X:
Y:
1920
1080
Users can change the screen size and position easily by changing the
digital setting parameters. It is mainly suitable for the LED large screen
users.
Crop: Crop button, press it and it lights, users can crop the current
selected layer image through the up-down and left-right sides knob, and
can adjust the crop position, size, the current selected layer is subject to
button A, B, C, D. For details, please refer to: How to crop the layer
image?
Position: Image position adjustment button, press it and it lights, users
can adjust the selected layer image through the up-down and left-right
knob, the current selected layer is subject to button A, B, C, D. For details,
VSP 3600
User Manual
50
2. Hardware Orientation
VSP 3600 Front Panel Button Part
please refer to: How to set the position of layer image?
POS
POS
X:
Y:
0
0
Control Button Part
Menu, confirm button, press it to return to the superior option; when it is
used as menu key, it includes menu content as follows: DEV INFO, INPUT
CONFIG, OUTPUT CONFIG, LAYER CONFIG, RESET. Users can adjust
the needed install option combined with knob according to need.
Confirm button or lower key, press the key to confirm options or enter-out
the current options.
Knob Part
Up-down knob: rotate the knob, you can adjust menu page or function
option on the control LCD panel.
Left-right knob: rotate the knob, you can adjust menu page concrete
numerical value or numerical value of function options on the control LCD
panel, such as resolution, color space value, etc.
LCD Panel Part
Used as interactive menu of display buttons and communication.
VSP 3600
User Manual
51
3. Hardware Installation
In This Chapter
This chapter provides comprehensive installation instruction for VSP 3600
hardware:
Following is the size of VSP 3600 for your reference:
VSP 3600
User Manual
52
Safety Precautions
For all VSP 3600 processor installation procedures, please observe the
following important safety and handling rules to avoid damage to yourself
and the equipment.
 To protect users from electric shock, ensure that the chassis connects
to earth through the ground wire provided in the AC power Cord.
 The AC Socket-outlet should be installed near the equipment and be
easily accessible.
Unpacking and Inspection
Before opening VSP 3600 process shipping box, inspect it for damage. If
you find any damage, notify the shipping carrier immediately for all claims
adjustments. As you open the box, compare its contents against the
packing slip. If you find any shortages, contact your sales representative.
Once you have removed all the components from their packaging and
checked that all the listed components are present, visually inspect the
system to ensure there was no damage during shipping. If there is damage,
notify the shipping carrier immediately for all claims adjustments.
Site Preparation
The environment in which you install your VSP 3600 should be clean,
properly lit, free from static, and have adequate power, ventilation, and
space for all components.
.
VSP 3600
User Manual
53
4. Menu Orientation
In This Chapter
This chapter describes all VSP 3600 processor menus, including how they
are accessed, the functions that are available, and descriptions of each
menu tree (in block diagram format).
The following topics are discussed:
• MENU

DEV INFO

INPUT CONFIG

OUTPUT CONFIG

LAYER CONFIG

VIEW

SYSTEM

RESET
VSP 3600
User Manual
54
4. Menu Orientation
MENU
MENU
Press MENU button to enter the main MENU;
Scrolling UP/DOWN to browse menu tree primary menu;
Press NEXT to the secondary menu.
Repeat the same operations can access to level 3 and level 4 menu ;
Knob LEFT/RIGHT to set and adjust for the current menu;
Again press MENU to return to the superior MENU;
VSP 3600 menu tree are as follows:
VSP 3600
User Manual
55
4. Menu Orientation
MENU
DEV INFO
Select Dev Info, pressing NEXT, It will show the information of input and
output video signals. As picture above, running the knob switch can check
preview output format, output format, program version, the current device
IP address and baud rate;
INPUT CONFIG
Select Input Config (Input configuration), press NEXT, knob LEFT/RIGHT,
can set the input format.
INPUT FORMAT: Input resolution choice, VSP 3600 support 56 kinds of
resolutions, specific as follows:
720x480x60,720x576x50,1280x720x60,1280x720x59.94,1280x720x50,
1280x720x30, 1280x720x29.97, 1280x720x25, 1280x720x24,
1280x720x23.98, 1920x1080x60, 1920x1080x59.94, 1920x1080x50,
1920x1080x30, 1920x1080x30s, 1920x1080x29.97, 1920x1080x29.9s,
1920x1080x25, 1920x1080x25s, 1920x1080x24, 1920x1080x24s,
1920x1080x23.98, 1920x1080x23.9s, 640x480x60, 640x480x75,
640x480x85, 800x600x60, 800x600x75, 800x600x85, 1024x768x60,
1024x768x75, 1024x768x85, 1280x1024x60, 1280x1024x75,
1280x1024x85, 1600x1200x60, 720x480x60i, 720x576x50i,
1920x1080x60i, 1920x1080x50i, 1152x864x75, 1280x768x60,
1280x960x60, 1280x960x85, 1360x768x60, 1366x768x60,
1400x1050x60, 1440x900x60, 2048x1152x60,1680x1050x60,
VSP 3600
User Manual
56
4. Menu Orientation
MENU
1920x1200x60,1600x1200x60_r, 1920x1080x60_r, 1440x900x60_r,
1680x1050x60_r,1400x1050x60_r.
AUTO DETECT: Auto detect input resolution, this option general choose
ON open state, users will not need to choose manually, the equipment will
read input resolution automatically.
Note
The system is default for ON state;
COLOR SPACE: Color space choice, specific includes 4 kinds as follows:
Note
When the image color of input signal source
is not normal, it needed to regular.
TIMING ADJUST: Input image sequence settings;
Note
Adjust only permitted under the guidance of our
engineers.
VSP 3600
User Manual
57
4. Menu Orientation
MENU
OUTPUT CONFIG
Select Output Config (output configuration), then press NEXT key, knob
LEFT/RIGHT to set the following options separately:
OUTPUT FORMAT: Output resolution choice, VSP 3600 support 17 kinds
of resolutions, specific as follows:
1024x768x60,1280x720x60, 1280x768x60, 1280x1024x60,1360x768x60,
1366x768x60,1400x1050x60, 1440x900x60, 1440x900x60_r,
1600x1200x60, 1600x1200x60_r,1680x1050x60, 1680x1050x60_r,
1920x1080x60, 1920x1080x60_r, 1920x1200x60,2048x1152x60.
TIMING ADJUST: Output image sequence settings;
Note
Adjust only permitted under the guidance of our
engineers.
ALPHA:Set the current layer (A ~ D) image output transparency value
(range from 0 to 128), and control switching speed between layers (rage
from 0 to 6000ms, namely 0 ~ 6s).
VSP 3600
User Manual
58
4. Menu Orientation
MENU
LAYER CONFIG
SET INPUT: Input way selection, you can choose needed programming
way 1-4, after choosing, you can set display, rotate.
DISPLAY: Display Setting, you can set LIVE or FREEZE, H Mirror or V
Mirror switch.
Note
Image LIVE or FREEZE settings can also be
realized through FREEZE button.
SET ROTATE: Rotate Setting, you can set image rotation and choose the
image rotate to LEFT or rotate to RIGHT, and also can choose to OFF
image rotation function.
VSP 3600
User Manual
59
4. Menu Orientation
MENU
Note
This setting can also be realized through Rotate
button.
VIEW
SET MAX ALPHA: Alpha value setting, the adjustable range is between
2~128.
SIGNAL BACKUP: Signal back up, user can choose ON/OFF. If one
channel signal interrupted, the device will switch to next channel signal in
ON station.
DELAY CALL SAVE: Set delay the output time. When more than one
equipment power on, and the processor is the end equipment in order to
improve question that can’t identify the input signal and phenomenon that
LED screen appear messy code and flash screen, now need to delay the
input time.
FADE IN/OFF: FADE IN/OFF effect, user can choose ON/OFF. If choose
ON, it will first darken, and then get fade in fade out effect when save call.
If choose OFF, it will directly get fade in fade out effect.
SYSTEM
LANGUAGE: Through this option, user can choose Chinese or English
according to their needs to operate the interface more quickly.
MODIFY IP.
PADLOCK SETTING: Key lock function, user can choose ON/OFF, and
also can press MENU and NEXT button simultaneously to lock the key
keyboard, press MENU and NEXT button simultaneously again can
cancel the key lock function.
VSP 3600
User Manual
60
4. Menu Orientation
MENU
RESET
If select Reset, press NEXT to previously saved user-mode will be clear;
and it will show as picture above:
RESET
RESET FINISH!
VSP 3600
User Manual
61
5. Communication Software Guideline
In This Chapter
This chapter mainly introduce the control of communication software,
mainly includes as follows:

Install Software

Run Software

How to control processor through RS232?

How to control processor with console software by USB?
VSP 3600
User Manual
62
5. Communication Software Guideline
Install Software
Install Software
VSP 3600 video processor is very easy to be configured with user friendly
communication software, support drag and drop operation for edit and
display. Also it can be customized with schedule function.
Double click
, to install, English version default for use, click
―select‖ to next dialog:
Please read the terms of service before you install VSP 3600 PC software,
choose "Agree" to continue installation; Select "Disagree" will exit the
installation, as shown in figure:
VSP 3600
User Manual
63
5. Communication Software Guideline
Install Software
Users can choose installation path of the VSP 3600 PC software through
the "Destination Directory", as shown in figure:
VSP 3600
User Manual
64
5. Communication Software Guideline
Install Software
Choose "Next" to continue installation, as shown in figure:
Choose "Next" to continue installation, as shown in figure:
VSP 3600
User Manual
65
5. Communication Software Guideline
Install Software
Choose "Next" to continue installation, as shown in figure:
Click ―Finish‖ and ready to run VSP 3600 console, as shown in figure:
VSP 3600
User Manual
66
5. Communication Software Guideline
Run Software
Run Software
The user install VSP 3600 PC software in the random attached disk
. Install the software to the specified directory according to the
software prompt, the installation steps as follows: Run Software
Double-click on the desktop shortcut to operate and
software
control
.
VSP 3600 control software interface as shown:
Language Selection
In order to using PC software more efficiently, please choose the correct
language version before use.
VSP 3600
User Manual
67
5. Communication Software Guideline
Run Software
Connection
Through the PC software to control video processor, the product is
equipped with a control line that is serial lines by default (RS-232), end
nine-pin port (DB9F), four-pin COM Crystal head at one end (6B4C),
besides the power line.
Connection steps are described in detail below:
First, connect nine-pin port (DB9F) to corresponding ports on computer
and connect COM Crystal head to the RS232 port on the video processor.
Open the video processor, then operate the computer, back to the
computer's desktop window, click on【 My computer】right mouse button
and go into 【 Properties】to find the 【Hardware】 tab, as described in
the following, click on 【Device Manager】on the left mouse button.
Find the "ports (COM and LPT)" in the Device Manager, then click the
plus sign on the left and record your computer's serial port name, as
following figure, the using serial port is COM1.
VSP 3600
User Manual
68
5. Communication Software Guideline
Run Software
After confirmation of serial port then open control software, find the
【Connection】tab, click to enter setup option:
Software serial connection by default, when the user use at the first time,
set the serial port;
Interface left bottom display
click the button
connection, it displays
, after serial port setup finished,
, serial displays button
, after successful
, on left corner, which means that the
Connector has already been connected with video processors, and you
can control video processor through the PC software.
More details may refer to: ―How to control processor through RS232?‖
In addition, the product is also equipped with a USB control line, which is
also available to connect the computer and the video processor to control
VSP 3600
User Manual
69
5. Communication Software Guideline
Run Software
PC software, concreteness can refer to: “How to control processor with
console software by USB?”
Note
RS 232 Serial line, all USB line can upgrade
procedures.
After USB connection or serial connection, click to search equipment, the
equipment search and connect automatically. If you use network,
equipment IP address by default is: 192.168.0.100, please set the IP
address of the computer firstly, set up the computer in the same network
segment, different IP address, you can communicate, such as:
192.168.0.99.
In addition, VSP 3600 PC software can also control many set of
equipment, if the user need more table control, you can click to add,
appear interface as follows:
Input equipment name, if you choose a serial port or USB communication,
need to choose communication COM port and baud rate, if you choose
network communication, you need to set equipment IP address, the local
port and remote port is 1000 by default.
If you need to reduce the connected device, click delete or delete all to
clear.
VSP 3600
User Manual
70
5. Communication Software Guideline
Run Software
Mode Settings
After confirm the equipment can communicate, you can use after you set
up equipment display. set the 【 Mode 】 options in figure:
Output Settings
Set output way information, you can set output 1, 2, 3, 4 channel
respectively;
Alpha Settings
VSP 3600
User Manual
71
5. Communication Software Guideline
Run Software
You can set the alpha value of each layer respectively (range in 0 ~ 128),
when the transparency is 0, the layer image will not display, when the
transparency is 128, the layer image display fully.
Note
The function is the same as MENU
Config
Output 1
Output
Layer A~D Alpha
Alpha Speed Settings
Alpha speed refers to image switching speed between layers of degree,
scope in 0 ~ 6 seconds;
Note
The function is the same as MENU
Config
Output 1
Output
Alpha Time
Color Key Settings
VSP 3600
User Manual
72
5. Communication Software Guideline
Run Software
Available/close: Select and tick available option, the color key function
open;
Key in: Select color to remove;
Key out: Select color to reserve;
Red, green, and blue article regulation bar: Adjust color value of the
color key.
Note
The function is the same as DSK.
Devices Settings
You can set up A,B,C,D layer respectively;
VSP 3600
User Manual
73
5. Communication Software Guideline
Run Software
Input Port Settings
VSP 3600 is multi-layer image processing, set all layer data in this
interface, the layer data can configurate input way arbitrarily, namely, four
layers can be configured to the same or different way data, and realize
matrix function.
Note
The function is the same as MENU
Config
Layer A
Set Input
Output
Set
Input 1~4
Scale Settings
You can adjust image X and Y coordinate values, the width and height
value; The user can narrow or enlarge image by changing the number or
click on the pull down arrow or drag the edge of image.
VSP 3600
User Manual
74
5. Communication Software Guideline
Run Software
Note
This set also can realize through the SCALE
and Position key
Crop Settings
You can set crop function to signal input image. The user can cut image
by changing the number or click on the pull down arrow, or drag the edge
of image.
Note
This set also can realize through the CROP key
Display Mode
There are two different display modes, when selecting the live video that
is normally broadcast video; when selecting a still frame, it ceases to play
video but only shows a frame of picture.
Note
The function is the same as MENU
Config
Layer A
Output
Display
MODE: Freeze/Live
This set also can realize through the Freeze key
Mirror Image and Test Pattern Settings
VSP 3600
User Manual
75
5. Communication Software Guideline
Run Software
There are two mirror modes, namely level image and vertical mirror; you
can also choose test images;
Note
The function is the same as MENU
Config
Layer A
Display
Output
H/V
Mirror.
Rotate Settings
VSP 3600
User Manual
76
5. Communication Software Guideline
Run Software
Note
The function is the same as MENU
Config
Layer A
Output
Set Rotate
This setting also can realize through Rotate key.
Switch Mode Settings
Swap: After switch Cut/Take, Program input and Preview input, the image
exchange.
Stay: After switch Cut/Take, Program follow Preview input image.
Note
OUTPUTS keyDVI1 corresponding outlet
VSP 3600
User Manual
77
5. Communication Software Guideline
Run Software
DVI1/VGA1 is the Program main output default
by system;OUTPUTS key DVI2~DVI4
corresponding outlet is DVI2/VGA2, DVI3/VGA3,
DVI4/VGA4 is the Preview output default by
system.
Layout
Equipment provides 13 kinds of layout for the user's choice;
The corresponding rendering is listed below:
:
:
:
VSP 3600
User Manual
78
5. Communication Software Guideline
Run Software
:
:
:
:
:
VSP 3600
User Manual
79
5. Communication Software Guideline
Run Software
:
:
:
:
:
Note
This setting also can realize through PIP key.
VSP 3600
User Manual
80
5. Communication Software Guideline
Run Software
Note
12 group user output layout effect is for only
output 1, corresponding device interface is DVI1
and VGA1.
Load User Mode
Click on the loading user mode options, you can transfer to the user save
information directly, the system provides 10 kinds of save modes for
customers choose.
Note
This setting also can realize through Load key.
Note
Without electricity to restart, equipment loads
user mode 1 automatically.
Save User Mode
Click save user mode to confirm after the completion of all parameter
adjustment, save all settings, for the convenience of user to realize
different patterns of scene application quickly, the system provides 10
kinds of save mode, prompt the user save data position, save after the
success, the user can recall save parameters in the recall save button
directly after save successfully.
VSP 3600
User Manual
81
5. Communication Software Guideline
Run Software
Note
This setting also can realize through Save key.
Split Screen Mode
It provides 7 kinds of cascade modes for the user to choose. The
corresponding rendering is listed below:
VSP 3600
User Manual
82
5. Communication Software Guideline
Run Software
Note
This setting also can realize through Split key.
CUT
Seamless switch button;
Note
The function is the same as CUT.
VSP 3600
User Manual
83
5. Communication Software Guideline
Run Software
Take
Seamless special effects switch button;
Note
The function is the same as Take.
Note
OUTPUTS keyDVI1 corresponding outlet
DVI1/VGA1 is default output; OUTPUTS key
DVI2~DVI4 corresponding outlet are
DVI2/VGA2, DVI3/VGA3, DVI4/VGA4.
Config Mode
Input Config
Click home page on the configuration, tick in the input configuration option,
, it needn't to choose manually, the system can
search the resolution of the input automatically, the other set terms is gray,
namely, you needn't to set, equipment is the default settings, as the
VSP 3600
User Manual
84
5. Communication Software Guideline
Run Software
following graph:
Note
The choice of output resolution, the function is
the same as MENU
1
Input Config
Input
Input Format
Output Config
Click on the configuration mode page, users only need to select output
resolution in the output configuration option, other settings items is gray,
namely, when you needn't to set, equipment is the default settings, as the
following graph:
VSP 3600
User Manual
85
5. Communication Software Guideline
Run Software
Note
The choice of output resolution, the function is
the same as MENU
Input Config
Input
Format
Control
IP Setting
User can set IP through this function, and it often used for the same
computer to operate a few devices at the same time or remote control. If
you use a serial port to change IP, it can become effective directly; If you
use the Internet to change IP, after change, upper machine should be shut
off, then to open again, the IP value can normal connection after filling and
changing of network IP.
VSP 3600
User Manual
86
5. Communication Software Guideline
Run Software
Factory reset
Click on the device factory initialization, all set back the factory value.
Note
The function is the same as Reset in the menu.
Language
Language choice; The software supports Chinese and English
Management
Advanced Test
Note
VSP 3600
User Manual
87
5. Communication Software Guideline
Run Software
Advanced test only for engineers, please
contact our customer personnel for the
administrator password if you need;
Script
Load Customer Script
The Users can input previous script and change the parameters.
Save Customer Script
Save the current script in operation to the specified path;
Version Explain
Show the content of the software version upgrade;
About
Shows the software version and company information;
Image Display Toolbar
VSP 3600
User Manual
88
5. Communication Software Guideline
Run Software
Display the location, size and output resolution information of the current
image. When the user modify parameters in the image toolbar, display
image may change follow it.
Information Toolbar
The bottom of Software connector displays software version, core board
version, firmware version and product serial number of the current used
device.
VSP 3600
User Manual
89
5. Communication Software Guideline
How to control processor through RS232?
How to control processor through RS232?
First, install PC software in control computer;
Connecting PC and VSP 3600 through a serial port needs to use serial
line of device standard (RS-232, one end is nine-pin, the other end is four
needle crystal COM head.) COM four needle crystal head access VSP
3600 RS232 control Connector, the other end access PC serial.
Connection schemes are as follows:
If there is no any Serial port on your PC, you will need another Serial to
USB adapter. Connect one end of the RJ11 download line to the RS232 on
the video processor. Connect the end of USB-side to the PC, Ensure the
cable connection is good. Right click the【My Computer】on the home
screen of control PC. Enter【Attribute】
, Find【Hardware】
Option,
as following,
Click【Device Manager】.
Click【Device Manager】―+‖ on the left,check the COM number,as
following, COM1 is offered.
VSP 3600
User Manual
90
5. Communication Software Guideline
How to control processor through RS232?
Software is default serial connection, first time user has to set serial port.
Interface left bottom display
click the button
, after serial port setup finished,
, serial displays button
connection, it displays
after successful
on left corner, which means that the
connector has already been connected with video processors, and you
can control video processor through the PC software.
Note
If power off during communication, should close
the port
, by first, and plug in out of the USB
and do communication.
VSP 3600
User Manual
91
5. Communication Software Guideline
How to control processor with console software by USB?
How to control processor with console
software by USB?
Install the driver
;
Firstly, release the following compression bag:
Secondly, find
in the file: Dfuse; ( Install
VCP_V1.3.1_Setup.exe if the computer system is 32 bit system, and if
the computer system is 64 bit system, install
VCP_V1.3.1_Setup_amd64.exe) . Connect the USB cable to the PC and
the video processor .turn on the VSP 3600, for the first time to use USB,
the PC will remind finding the new hardware and ask to install the driver for
this new driver:
Install from the list or specified location, press ―NEXT‖:
Press ―browser‖ to find the driver, and press ―NEXT‖:
VSP 3600
User Manual
92
5. Communication Software Guideline
How to control processor with console software by USB?
When the installation finish, can go to check the installed COM port inside
the device management, as following picture shows:
VSP 3600
User Manual
93
5. Communication Software Guideline
How to control processor with console software by USB?
Install the console software, and run after install, shows the interface of the
console as following:
Select the COM as installed just now.
Press
to start communication,when there is
it means the
communication is ok, and you can use the software to control the device
now; the software operation is the same as VSP 3600.
VSP 3600
User Manual
94
6. System Setup and Operations
In This Chapter
This chapter provides comprehensive instructions for system setup and
operations. The following topics are discussed:

How to determine equipment run normally?

How to change the output resolution?

How to edit and definite program?

How to edit and define layer?

How to add layer?

How to clear layer?

How to edit and define outputs?

How to scale the layer image?

How to crop the layer image?

How to set the position of layer image?

How to set independent outputs in PIP effects?

How to achieve split function?

How to set picture size in split effects?

How to rotate layer image?

How to achieve color extraction?

How to achieve LOGO overlay?

How to achieve subtitles superposition?

How to save the current setting parameters?

How to recall the saved parameters?
VSP 3600
User Manual
95
6. System Setup and Operations
How to determine equipment run normally?
How to
normally?
determine
equipment
run
1. Firstly, ensure the equipment is on power and run normally;
2. After the equipment into self-check state, starts the fan, scan button
one by one;
3. After button scanning is completed, equipment into the starting state,
equipment LCD display as follows:
RGBLink
视诚科技
亮彩系列
AVDSP Series VSP 3600
Initializing
Please wait...
IN1:1024 x768 x60
IN2:1280 x768 x60
IN3: 1280 x1024 x60
IN4: 1600 x1200 x60
OUT:1920x1080x60
IP:192.168.0.100
视诚科技
VSP 3600
VSP 3600
User Manual
RGBlink
VER 3.5
96
6. System Setup and Operations
How to determine equipment run normally?
4. After start, the equipment default recall factory parameter or save 1
system parameters, individual functional keys among key lights light up,
equipment liquid crystal cycle as shown below:
5 seconds
5 seconds
IN1:1024 x768 x60
IN2:1280 x768 x60
视诚科技
VSP3600
IN3: 1280 x1024 x60
IN4: 1600 x1200 x60
RGBlink
VER 3.5
Out:1920x1080x60
IP:192.168.0.100
5. Equipment starts normally.
VSP 3600
User Manual
97
6. System Setup and Operations
How to change the output resolution?
How to change the output resolution?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. VSP 3600 provides 12 kinds of common output formats for user;
2. Click【MUNE】key, key lights;
3. Set LED panel scan menu, light spin UP/DOWN knob to select
OUTPUT CONFIG;
UVP 360
*OUTPUT CONFIG
>>
4. Press【NEXT】to enter the menu,light spin LEFT/RIGHT knob to select
OUTPUT FORMAT;
OUTPUT CONFIG
*COMMON FORMAT >>
5. Press【NEXT】 to enter to the menu,light spin LEFT/RIGHT knob to
select output resolution;
COMMON FORMAT
>1920x1080x60 <>
6. Press 【NEXT】 to set, that is, to realize the operation of changing
output resolution.
VSP 3600
User Manual
98
6. System Setup and Operations
How to edit and define program?
How to edit and define program?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. In the LAYER area , layer ABCD key light and flicker means the layer
can be edited;
2. In the LAYER FUNCTIONS area , press the【Program 】key firstly, key
light;
3. In SOURCES area, press signal button, select 1234 key, key light,
means the corresponding channel were edited to current layer.
4. In the LAYER FUNCTIONS area, press the 【Program 】 button again,
button light turn out and complete of the input channel edit definition.
VSP 3600
User Manual
99
6. System Setup and Operations
How to edit and define layer?
How to edit and define layer?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Layer key operation include as follows:
1. Layer input signal is frozen, 【 FREEZE 】 is layer freezing key , key
lights, layer input signal in a stationary state; Key light turn out, layer
input signal in dynamic state;
2. Layer input signal is full screen, 【 Full Scream 】 is layer input signal
full screen buttons, press key, layer input signal recover full screen
output state;
3. Layer input signal configuration, 【 Program 】 is layer input signal
configuration keys, key lights, layer input signal in the edit and
configuration state; Key light turn out, close layer edit and
configuration state;
4. Add Layer, 【 Add Layer 】 is increase Layer button; Key lights,
realize the increase of layer; Key lights went out, closing increase
layer functions;
5. Delete Layer, 【 Clear Layer 】 is delete button Layer; Key lights,
realize the layer delete; Key lights went out, closing delete layer
functions.
VSP 3600
User Manual
100
6. System Setup and Operations
How to add layer?
How to add layer?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. In LAYER FUNCTIONS area, first press 【 Add Layer 】 key, key light,
start add layer function;
2. In LAYER area, choose needed increase layer according to your need,
press layer ABCD key (select all), key lights, then the layer is selected,
and start add layer function;
3. In LAYER FUNCTIONS area, press 【 Add Layer 】 key again, key
lights go out, and close add layer function.
VSP 3600
User Manual
101
6. System Setup and Operations
How to clear layer?
How to clear layer?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. In LAYER FUNCTIONS area, first press 【Clear Layer 】 key , key
lights, and start clear layer function;
2. In LAYER area, press any layer ABCD key that need to clear, key
lights, and clear layer succeed;
3. In LAYER FUNCTIONS area, press 【Clear LAYER 】 key again, key
lights go out, and close clear layer function;
VSP 3600
User Manual
102
6. System Setup and Operations
How to edit and define outputs?
How to edit and define outputs?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. In OUTPUTS area, first press any one of 1, 2, 3, 4 key, key lights, and
it means output can be edited;
2. OUTPUTS key【DVI1】is corresponding to back panel output DVI1 and
VGA1 interface;
OUTPUTS key【DVI2】is corresponding to back panel output DVI2 and
VGA2 interface;
OUTPUTS key 【DVI3】is corresponding to back panel output DVI3
and VGA3 interface;
OUTPUTS key 【DVI4】is corresponding to back panel output DVI4
and VGA4 interface;
Note
OUTPUTS key【DVI1】is corresponding to
output DVI1/VGA1 and is default the Program;
3. In LAYER FUNCTIONS area, press【Add LAYER】 key, and add layer
for outputs, that is add the number of output window;
4. In LAYER FUNCTIONS area, press【Clear LAYER】key, and clear
layer for outputs, that is reduce output window number;
5. In LAYER FUNCTIONS area, press 【
Program 】 button, to
configurate input layer for layer, that is configurate input signal source
for output window;
6. In CUSTOM ADJUSTMENTS area, press 【 Scale 】key, set the layer
input image size, that is narrow or amplify for output window;
7. In CUSTOM ADJUSTMENTS area, press 【 Crop 】 key, cut the layer
input image, that is cut input signal source for output window;
VSP 3600
User Manual
103
6. System Setup and Operations
How to edit and define outputs?
8. In CUSTOM ADJUSTMENTS area, press 【 Position 】key, set
Position of input image for the layer, that is adjust position for output
window;
VSP 3600
User Manual
104
6. System Setup and Operations
How to scale the layer image?
How to scale the layer image
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. In CUSTOM ADJUSTMENTS area, press 【Scale】 key, key lights,
and start the scale function;
2. In LAYER area, press any bright key of A, B, C, D bright light key (light
key among layer key is optional), key lights, and it can be edited;
3. Rotate the up/down knob to adjust window width; Rotate the left/right
knob to adjust window height;
4. LCD screen displays control value;
SIZE
SIZE
X:
Y:
1920
1080
5. In CUSTOM ADJUSTMENTS area, press 【Scale】 key, key lights,
and close the scale function.
VSP 3600
User Manual
105
6. System Setup and Operations
How to crop the layer image?
How to crop the layer image?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. In CUSTOM ADJUSTMENTS area, light touch【Crop】 key, key lights,
and start crop the layer image function;
2. In LAYER area, press any bright key of A, B, C, D (keys light are
optional ), key lights, and it can be edited;
3. Rotate left/right knob, and adjust the menu options, menu displays as
follows:
CROP X: X axis starting point;
CROP Y: Y axis starting point;
CROP WIDTH: Crop width;
CROP HIGHT: Crop height;
4. Rotate left/right knob, and adjust the optional value;
5. In CUSTOM ADJUSTMENTS area, press【Crop】key,key lights out,
and close crop function;
VSP 3600
User Manual
106
6. System Setup and Operations
How to set the position of layer image?
How to set the position of layer image?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. In CUSTOM ADJUSTMENTS area, press 【Position】 key, key lights,
and start the set the position of layer image function;
2. In LAYER area, press any bright key of A, B, C, D (keys light are
optional), key lights, and it can be edited;
3. Rotate left/right knob to adjust window level position, and rotate
up/down knob to adjust window vertical position;
4. LCD screen displays the value;
POS
POS
X:
Y:
0
0
5. In CUSTOM ADJUSTMENTS area, press 【Position】 key, key lights
and close the set the position of layer image function;
VSP 3600
User Manual
107
6. System Setup and Operations
How to set independent outputs in PIP effects?
How to set independent outputs in PIP
effects?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. In the EFFECTS area, press 【PIP】 key, key lights, and start to set
independent outputs in PIP effects;
2. In OUTPUTS area, press any bright key of A, B, C, D, key lights, and
the output is selected, it can be edited;
3. In LAYER FUNCTIONS area, press 【 Add Layer 】 or 【 Clear
Layer 】to increase or delete window;
4. In layer area, press to add or clear layer, and press button 1, 2, 3, 4 to
realize the function of add or clear window;
5. Press 【 PIP 】 key, LCD screen displays the layout mode choice of
Layout mode, VSP 3600 provides 13 kinds of Layout mode for user.
Layout
*Layout
Mode 1:
>
Layout Mode 1: signal picture mode Layout
Layout Mode 2: Level double-picture mode
VSP 3600
User Manual
108
6. System Setup and Operations
How to set independent outputs in PIP effects?
Layout Mode 3: Vertical double-picture mode Layout
Mode 4: Level three pictures mode
Layout Mode 5: Vertical three pictures mode
Layout Mode 6: Level two pictures two sides and middle one picture space bar centering mode
Layout Mode 7: The right of level single picture and left part vertical
double-picture mode
VSP 3600
User Manual
109
6. System Setup and Operations
How to set independent outputs in PIP effects?
Layout Mode 8: The left of level single picture and right vertical
double-picture mode
Layout Mode 9: Four pictures field word mode
Layout Mode 10: Four pictures level mode
Layout Mode 11: Four pictures vertical mode
VSP 3600
User Manual
110
6. System Setup and Operations
How to set independent outputs in PIP effects?
Layout Mode 12: The right of level single picture and left vertical three
screen mode
Layout Mode 13: The left of level single picture and right vertical three
screen mode
VSP 3600
User Manual
111
6. System Setup and Operations
How to achieve split function?
How to achieve split function?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. In EFFECTS area, press 【 Split 】 key, key lights, then start the
output split function;
2. LCD screen displays split mode choice, VSP 3600 provides 7 kinds of
split mode for user;
SPLIT SCREEN
*HORIZONTAL 1/2
>
Split Mode 1: HORIZONTAL 1/2
Split Mode 2: VERTICAL 1/2
Split Mode 3: FIELD GLYPH
Split Mode 4: HORIZONTAL 1/4
Split Mode 5: VERTICAL 1/4
Split Mode 6: 2 IN 3 OUT
VSP 3600
User Manual
112
6. System Setup and Operations
How to achieve split function?
Split Mode 7: 2 IN 4 OUT
3. Light spin left/right knob, the user can select the split mode according
to actual demand;
4. In OUTPUTS area, press any key of 1, 2, 3, 4, select preset output,
key lights, and it is selected;
6. In CUSTOM ADJUSTMENTS area, press 【 Scale 】 key and
【 Position 】 key , key lights, and you can set the size and position
of output image;
7. Light spin left/right knob and up/down knob, and you can set the size
and position of output image;
8. In OUTPUTS area, press DVI1, DVI2, DVI3, DVI4 again, regulate the
selected output, repeat item 5 and 6 of operation to complete
regulation set;
Note
When VSP 3600 is in split mode, it only split for
A layer, and is invalid for other layers. (1.1
version specification)
VSP 3600
User Manual
113
6. System Setup and Operations
How to set picture size in split effects?
How to set picture size in split effects?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. When VSP 3600 is under split mode, in EFFECTS area,【 Split 】 key
lights;
2. In OUTPUTS area, press any key of 1, 2, 3, 4, select pre-regulating
outputs, key lights, and it is selected;
3. In CUSTOM ADJUSTMENTS area, press 【 Scale 】 keys, key lights,
and you can set the size of output image;
4. Light spin around knob and upper and lower knob, set the size of
output image;
5. In OUTPUTS area, press DVI1, DVI2, DVI3, DVI4 again, regulate the
selected output, repeat item 3 and 4 operation to complete regulation
setting.
VSP 3600
User Manual
114
6. System Setup and Operations
How to rotate layer image?
How to rotate layer image?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. When VSP 3600 is under PIP effect mode, in EFFECTS area,【PIP】
key lights;
2. In EFFECTS area, press【Rotate】key, key lights, image rotate function
starts;
3. LED panel prompt rotate mode, VSP 3600 provides 2 kinds of rotate
modes for user, that is image rotate to left or right;
4. Light spin left/right knob, and choose the rotate mode;
5. In EFFECTS area, press【Rotate】key again,key light out, and image
rotate function is closed.
Note
Rotate effect mode is available only when VSP
3600 is under PIP mode, and rotate effects
setting is only for A layer, other layers are
invalid. (1.1 version specification)
VSP 3600
User Manual
115
6. System Setup and Operations
How to achieve color extraction?
How to achieve color extraction?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. When VSP 3600 is under PIP effect mode, in EFFECTS area,【PIP】
key lights;
2. In EFFECTS area, press【DSK】key, key lights, color extraction
function starts;
3. LED panel prompts menu option, light spin up/down knob, select KEY
MODE model, and there are two kinds of modes;
LCD picture: KEY MODE OUT is delete for the setting color value, and the
color value is set in KEY COLOR;
LCD picture: KEY MODE OUT is keep for the setting color value, and the
color value is set in KEY COLOR;
Spin LEFT/RIGHT knob, select the mode;
4. Light spin UP/DOWN knob,choose KEY COLOR setting, set the color
value:
LCD picture: SET R MIN/MAX is the setting red keyer value range;
LCD picture: SET G MIN/MAX is the setting green keyer value range;
LCD picture: SET B MIN/MAX is the setting blue keyer value range;
Spin UP/DOWN knob, select R, G, B to set minimum and maximum
option;
Spin LEFT/RIGHT knob to set minimum and maximum option;
5. Observe keyer results through output to achieve a better setting;
Note
When DSK is under effect mode, it only set DSK
effect for D layer, other layers is invalid. (Version
1.1 specifications)
VSP 3600
User Manual
116
6. System Setup and Operations
How to achieve LOGO overlay?
How to achieve LOGO overlay?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. When VSP 3600 is under PIP effect mode, in EFFECTS area,【PIP】
key lights;
2. In EFFECTS area, press【DSK】key, key lights, color extraction
function starts;
3. LED panel prompts menu option, light spin up/down knob, select KEY
MODE model, and there are two kinds of modes:
LCD picture: KEY MODE OUT is delete for the setting color value, and the
color value is set in KEY COLOR;
LCD picture: KEY MODE OUT is keep for the setting color value, and the
color value is set in KEY COLOR;
Spin LEFT/RIGHT knob, select the mode;
4. Light spin UP/DOWN knob, choose KEY COLOR setting, set the color
value:
LCD picture: SET R MIN/MAX is the setting red keyer value range;
LCD picture: SET G MIN/MAX is the setting green keyer value range;
LCD picture: SET B MIN/MAX is the setting blue keyer value range;
Spin UP/DOWN knob, select R, G, B to set the minimum and maximum
option;
Spin LEFT/RIGHT knob to set minimum and maximum option;
5. Observe keyer results through output to achieve a better setting;
Note
When DSK is under effect mode, it only set DSK
effect for D layer, other layers is invalid. (Version
1.1 specifications)
VSP 3600
User Manual
117
6. System Setup and Operations
How to achieve subtitles superposition?
How to achieve subtitles superposition?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. When VSP 3600 is under PIP effect mode, in EFFECTS area,【PIP】
key lights;
2. In EFFECTS area, press【DSK】key, key lights, color extraction
function starts;
3. LED panel prompts menu option, light spin up/down knob, select KEY
MODE model, and there are two kinds of modes:
LCD picture: KEY MODE OUT is delete for the setting color value, and the
color value is set in KEY COLOR;
LCD picture: KEY MODE OUT is keep for the setting color value, and the
color value is set in KEY COLOR;
Spin LEFT/RIGHT knob, select the mode;
4. Light spin UP/DOWN knob, choose KEY COLOR setting, set the color
value:
LCD picture: SET R MIN/MAX is the setting red keyer value range;
LCD picture: SET G MIN/MAX is the setting green keyer value range;
LCD picture: SET B MIN/MAX is the setting blue keyer value range;
Spin UP/DOWN knob, select R, G, B to set the minimum and maximum
option;
Spin LEFT/RIGHT knob to set minimum and maximum option;
5. Observe keyer results through output to achieve a better setting;
Note
When DSK is under effect mode, it only set DSK
effect for D layer, other layers is invalid. (Version
1.1 specifications)
VSP 3600
User Manual
118
6. System Setup and Operations
How to save the current setting parameters?
How to save
parameters?
the
current
setting
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. When VSP 3600 function setting is finished, VSP 3600 provide 10
groups of saving modes in order to avoid setting again when you use
the same function or set again after restarting because of power out.
2. In CUSTOM ADJUSTMENTS area, press【 Save 】 key , 1, 2, 3, 4,
ALL key in SOURCES area, and DVI1, DVI2, DVI3, DVI4 key in
OUTPUTS area, Freeze key light, then enter the user save option;
Choose the appropriate position and save.
SAVE TO 1 corresponding button 1 in SOURCES area;
SAVE TO 2 corresponding button 2 in SOURCES area;
SAVE TO 3 corresponding button 3 in SOURCES area;
SAVE TO 4 corresponding button 4 in SOURCES area;
SAVE TO 5 corresponding button ALL in SOURCES area;
SAVE TO 6 corresponding button DVI1 in OUTPUTS area;
SAVE TO 7 corresponding button DVI2 in OUTPUTS area;
SAVE TO 8 corresponding button DVI3 in OUTPUTS area;
SAVE TO 9 corresponding button DVI4 in OUTPUTS area;
SAVE TO 10 corresponding button Freeze in Layer Functions area;
3. LCD displays as follows, rotate UP/DOWN knob, and choose save
position;
SAVE
>SAVE TO 1~10
VSP 3600
User Manual
119
6. System Setup and Operations
How to save the current setting parameters?
4. Press menu【NEXT】 key, confirm and save parameter.
LCD displays the save result:
SAVE TO 1
SAVE FINISH
VSP 3600
User Manual
120
6. System Setup and Operations
How to recall the saved parameters?
How to recall the saved parameters?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. When VSP 3600 function setting is finished, VSP 3600 provide 10
groups of saving modes in order to avoid setting again when you use
the same function or set again after restarting because of power out.
In CUSTOM ADJUSTMENTS area, press 【 Load 】 key to enter
user recall the saved parameter option.
LOAD FROM 1 corresponding button 1 in SOURCES area;
LOAD FROM 2 corresponding button 2 in SOURCES area;
LOAD FROM 3 corresponding button 3 in SOURCES area;
LOAD FROM 4 corresponding button 4 in SOURCES area;
LOAD FROM 5 corresponding button ALL in SOURCES area;
LOAD FROM 6 corresponding button DVI1 in OUTPUTS area;
LOAD FROM 7 corresponding button DVI2 in OUTPUTS area;
LOAD FROM 8 corresponding button DVI3 in OUTPUTS area;
LOAD FROM 9 corresponding button DVI4 in OUTPUTS area;
LOAD FROM 10 corresponding button Freeze in Layer Functions
area.
2. LCD displays as follows, rotate UP/DOWN knob, and choose recall
and save option;
LOAD
> LOAD FROM 1~10
3. Press menu【NEXT】key to confirm save parameter;
LCD displays the save result:
LOAD FROM 1
LOAD FINISH
Finished!l
VSP 3600
User Manual
121
6. System Setup and Operations
How to recall the saved parameters?
Note
VSP 3600 is default recall save 1 system to set
parameters. (Version 1.1 specifications)
VSP 3600
User Manual
122
7. Common Questions and Solution
In This Chapter
This chapter provides the common questions and solution for the video
processor. The following topics are provided:

No Output in Large Screen

Large Screen Output Flash Point

Large Screen only Display Part of the Image

No Display in the Second Half Part of Large Screen

All Key Lights Light Simultaneously
VSP 3600
User Manual
123
7. Common Questions and Solution
No Output in Large Screen
Confirm if there are any input singles
Press 【MENU】to find "Device information" , check if the INPUT signal is
normal via 【 NEXT 】, if suggest "NO INPUT", means no signal. Check
the front-end signal line, please note do double show or expand for
computer. Can enter other formats signal to do the same operation.
Confirm if single output
Find a belt VGA input (best for DVI) display, connect to the corresponding
output port of processor, check whether the signal is correct on the
monitor. If not display properly, please check whether there is input signal,
or if input wire interface is taken tight, output wire interface is picked up
tightly. If display normally, check if sending card is normally working or
need to replace sending card test.
Large Screen Output Flash Point
Confirm if preview output is normal
Find a belt VGA input (best for DVI) display, connect to the corresponding
output port of processor, check whether the signal is correct on the
monitor. If display normally shows and no flash point, please check
whether DVI outlets put tight or replace to DVI line of sending card. If
display flash point, please judge if input signal, wire, and interface is
normal.
Large Screen only Display Part of the
Image
Signal need to scale
Press 【Scale】, rotate the knob to adjust the size of screen size, including
"Width", "Height" etc. Press【NEXT】to confirm.
VSP 3600
User Manual
124
7. Common Questions and Solution
No Display in the Second Half Part of
Large Screen
Resolution is inadequate
Confirm the wide and high points on the screen, and select more
adequater resolution than screen width. Press 【NEXT】 to confirm.
All Key Lights Light Simultaneously
Check if dial switches are normal
Shut the power, check if two red dial switches near DVI1 are upward.
Reboot if they face down, and reboot. The function of the red dial
switched is mainly upgrade.
VSP 3600
User Manual
125
A.Specification
HDMI Input DVI-I Interface
Number of Inputs
4
Connector
Standard DVI-I socket
Supported
Resolution
SMPTE:1080P50, 1080P59.94/60,720p50,720p59.94/60,
VESA:
800×600×60/75/85Hz,1024×768×60/75/85Hz,1280×768×60/75/80Hz,
1280x960x60/85Hz,1280×1024×60/75/85Hz,1360x768x60Hz,
1366x768x60Hz,1400x1050x60Hz,1440x900x60Hz,1680x1050x60Hz,
1600×1200×60Hz,1920x1200x60Hz,1920×1080×50/59.94/60Hz,
2048x1152x60Hz
Signal Level
TMDS pwl,single pixel input,165MHz bandwidth
Standards
HDMI 1.3
Signal level
TMDS pwl , 165MHz bandwidth
DVI Loop Out Interface
Number of Inputs
4
Connector
Standard DVI-I socket
Supported
Resolution
SMPTE:1080P50, 1080P59.94/60,720p50,720p59.94/60,
VESA:
800×600×60/75/85Hz,1024×768×60/75/85Hz,1280×768×60/75/80Hz,
1280x960x60/85Hz,1280×1024×60/75/85Hz,1360x768x60Hz,
1366x768x60Hz,1400x1050x60Hz,1440x900x60Hz,1680x1050x60Hz,
1600×1200×60Hz,1920x1200x60Hz,1920×1080×50/59.94/60Hz,
2048x1152x60Hz
Signal Level
TMDS pwl,single pixel input,165MHz bandwidth
Standards
HDMI 1.3
Signal level
TMDS pwl , 165MHz bandwidth
DVI output DVI-I Interface
Number of outputs
4
Connector
Standard DVI-I socket
Signal level
TMDS pwl , 165MHz bandwidth
Supported
Resolution
VESA:
720x480x60,720x576x50,1280x720x60,1280x720x59.94,1280x720x50,
1280x720x30, 1280x720x29.97, 1280x720x25, 1280x720x24,
1280x720x23.98,1920x1080x60, 1920x1080x59.94, 1920x1080x50,
1920x1080x30, 1920x1080x30s, 1920x1080x29.97, 1920x1080x29.9s,
1920x1080x25, 1920x1080x25s, 1920x1080x24, 1920x1080x24s,
1920x1080x23.98, 1920x1080x23.9s, 640x480x60, 640x480x75,
640x480x85, 800x600x60, 800x600x75, 800x600x85, 1024x768x60,
1024x768x75, 1024x768x85, 1280x1024x60, 1280x1024x75,
1280x1024x85, 1600x1200x60, 720x480x60i, 720x576x50i,
VSP 3600
User Manual
126
1920x1080x60i, 1920x1080x50i, 1152x864x75, 1280x768x60,
1280x960x60, 1280x960x85, 1360x768x60, 1366x768x60,
1400x1050x60, 1440x900x60, 2048x1152x60,1680x1050x60,
1920x1200x60,1600x1200x60_r, 1920x1080x60_r, 1440x900x60_r,
1680x1050x60_r,1400x1050x60_r.
VGA output DB15 Interface
Number of outputs
4
Connector
Standard DB15 socket
Supported
Resolution
VESA:
720x480x60,720x576x50,1280x720x60,1280x720x59.94,1280x720x50,
1280x720x30, 1280x720x29.97, 1280x720x25, 1280x720x24,
1280x720x23.98,1920x1080x60, 1920x1080x59.94, 1920x1080x50,
1920x1080x30, 1920x1080x30s, 1920x1080x29.97, 1920x1080x29.9s,
1920x1080x25, 1920x1080x25s, 1920x1080x24, 1920x1080x24s,
1920x1080x23.98, 1920x1080x23.9s, 640x480x60, 640x480x75,
640x480x85, 800x600x60, 800x600x75, 800x600x85, 1024x768x60,
1024x768x75, 1024x768x85, 1280x1024x60, 1280x1024x75,
1280x1024x85, 1600x1200x60, 720x480x60i, 720x576x50i,
1920x1080x60i, 1920x1080x50i, 1152x864x75, 1280x768x60,
1280x960x60, 1280x960x85, 1360x768x60, 1366x768x60,
1400x1050x60, 1440x900x60, 2048x1152x60,1680x1050x60,
1920x1200x60,1600x1200x60_r, 1920x1080x60_r, 1440x900x60_r,
1680x1050x60_r,1400x1050x60_r.
Signal
R、G、B、Hsync、Vsync:0 to1Vpp±3dB
(0.7V Video+0.3v Sync ) 75 ohm
black level:300mV Sync-tip:0V
Function
Input
way
configuration
Support each input way signal programming configuration
Dural-screen
switching
Support split-screen of the arbitrary way
Special
switching
effect
Support multiple effects switching
Extras
Communication
RS232
Power Supply
90-264V 2A IEC-3
Work Environment
0°C~45°C
Stored
Environment
10% to 90%
Product Warranty
3 years parts and labor warranty
VSP 3600
USB
TCP/IP
User Manual
127
B.Contact Information
Warranty:
All video products are designed and tested to the highest quality standard
and backed by full 3 years parts and labor warranty. Warranties are
effective upon delivery date to customer and are non-transferable.
RGBlink warranties are only valid to the original purchase/owner.
Warranty related repairs include parts and labor, but do not include faults
resulting from user negligence, special modification, lighting strikes,
abuse(drop/crush), and/or other unusual damages.
The customer shall pay shipping charges when unit is returned for repair.
Headquarter: S603~604 Weiye Building Torch Hi-Tech Industrial
Development Zone Xiamen, Fujian Province, P.R.C.
VSP 3600




Tel: +86-592-5771197
Fax: +86-592-5771202
Customer Hotline: 4008-592-315
Websites:
~ http://www.rgblink.com
~ http://www.rgblink.cn
●
E-mail: [email protected]
User Manual
128
C. Software Upgrade
Main board MCU program upgrading steps
Decompression and install upgrade file:
Install USB upgrade file: find
in Dfuse, and install to the system default directory.
You also can choose by yourselves. ( You can install
DfuSe_Demo_V3.0.2_Setup.exe if the computer system is 32 bit
system, and you can install DfuSe_Demo_V3.0.2_Setup_amd64.exe if
the computer system is 64 bit system).
Using USB interface upgrade methods: connect USB interface and
computer interface by USB line, as shown in figure:
Upgrade the two dial switch next to the LAN port::
VSP 3600
User Manual
129
Supply power to the machine;
Upgrade program:
Open “DefuSe Menonstration” program file("Start" menu - all program STMicroelectronics - DefuSe - DefuSe Menonstration ) , then pop-up
dialog box as follows:
Click "Choose" button; pop-up dialog box, as shown in figure:
VSP 3600
User Manual
130
Choose upgraded software“VSP3600_V1.4.0_20120806_the n .dfu”
company formally issued edition, click ―open ‖button, pop-up dialog box,
as shown in figure:
VSP 3600
User Manual
131
Click ―Upgrade‖ button, pop-up dialog box, as shown in figure:
Click on the "yes" button; Enter the program updates states, as shown in
figure:
Program updates completion status as shown in figure, click "Quit" button
to exit:
VSP 3600
User Manual
132
Close power after the completion of the Program upgrade, downward the
two dial switches next to the LAN port, dial back to its original position, as
shown in figure: the state of switch downward:
Restart the equipment power, reset through the front panel operation after
the completion of restart, upgrade process finish.
VSP 3600
User Manual
133
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement