English - Beha
2014 | 2015
Product Catalogue
Electrical Test Equipment
from Beha-Amprobe
Two of the most famous brands in the
US and Germany have now joined forces
to become an even stronger brand
and are committed to provide the
best quality tools and support for the
customer. Beha-Amprobe offers wide
range of cost-effective, innovative test
equipment specifically designed to make
the electrician’s job faster and easier.
Beha-Amprobe products are sold and
supported by a wide range of dealers and
are backed up by a professional support
service. The vast array of Beha-Amprobe
products means that the electrician has
a one stop shop for quality, value-priced
products which include Installation Testers,
Voltage Detectors, Digital Multimeters,
Clamp Meters, Thermometers and Two Pole
Testers - one of the largest ranges available
to the electrical contractor and engineer.
Electrical Testers. . . . . . . . . . . . . . . . 3
Multifunction Installation Testers. . . 6
Clamp-on Meters. . . . . . . . . . . . . . . 8
Digital Multimeters. . . . . . . . . . . . . 11
Temperature Measurement. . . . . . . 14
Other Test Equipment. . . . . . . . . . . 17
Technical Specifications. . . . . . . . . . 21
Electrical Testers
The Beha-Amprobe 2100 series are
rugged, easy-to-use two pole voltage
testers for voltage and continuity checks.
Built tough for use in industrial and
commercial environments.
3
2050-D
MAGNO-VOLTfix
Non-contact voltage tester
2052-D
VOLTfix plus
Non-contact voltage tester
n
Non-contact, optical and acoustic
n
Fast, accurate detection of cable
n
Optical signal for detecting
n
Non-contact, optical and acoustic
n
Fast, accurate detection of
n
Reliable, automatic self-test
cable fractures in exposed
n
Compact and handy design
cables, for example cable
n
Wide range of applications magnetic fields
detection of AC voltages
drums and extension cables
n
Compact and handy design
n
Wide range of applications
detection of AC voltages
fractures in exposed cables
in business and industry
n
On / off switch
in business and industry
2054-D
VOLTfix Drill
Non-contact voltage tester
n
Integrated, high-quality
ECB50A
Circuit Breaker Finder
n
Fast and accurate locating of
fuses and assignment to circuits
n
Locating and tracing of cables
in walls
n
Set consisting of transmitter
and receiver in robust
carrying case
n
T ransmitter signal displayed
optically and acoustically
by the receiver
n
Transmitter
with integrated
Schuko receptacle enabling easy
connection to mains socket
n
Simple switching between fuse
screwdriver insert
n
Non-contact, optical and acoustic detection of AC voltages
n
Direct voltage test on
screwdriver blade
n
Continuity test
n
Fast, accurate detection of cable
fractures in exposed cables
n
Reliable, automatic self-test
n
Compact and handy design
n
.
Bright flashlight integrated
and cable finder function
n
Continuous sensitivity
adjustment of receiver
4
*Please contact your local distributor for
availability. Circuit breaker finder ECB50A-E
with UK plug available. Types ECB50A-FGIS
and SF-100 with Schuko plug available.
2100-Alpha
Two Pole Voltage Tester
2100-Beta
Two Pole Voltage Tester
Voltage Test: Display by
LEDs 12…690 V AC/DC
n
Voltage Test: Display by LED and
LCD display 12…690 V AC/DC
n
Response time: LED < 0.1 s
n
Response time: LED < 0.1 s, LCD < 1 s
n
Automatic ac/dc voltage
detection, indication of polarity
n
Automatic ac/dc voltage detection,
indication of polarity
n
Audible indication when
detected voltages above 50
VAC and 120 VDC
n
Audible indication when detected
voltages above 50 VAC and 120 VDC
n
Two pole phase rotation indication
n
Two pole phase rotation indication
n
n
Switchable load of 140 W with
two push buttons
Switchable load of 140 W with two
push buttons
n
Test of 30 mA RCD by push buttons
n
Test of 30 mA RCD by push buttons
n
Single pole test for phase polarity
n
Single pole test for phase polarity
n
n
Continuity test with visual
(LED) and audio indication
Continuity test with visual (LED)
and audio indication
n
Work light for dark environment
n
Work light for dark environment
n
IP 64 splash and dust proof
n
IP 64 splash and dust proof
n
n
Protective probe caps for
reducing the risk of injury
Protective probe caps for reducing
the risk of injury
n
n
Quick single hand test on mains
socket with 19 mm contact distance
Quick single hand test on
mains socket with 19 mm
contact distance
n
GS approved, built according to
DIN VDE 0682-401 and
EN 61234-3:2010
n
GS approved, built according
to DIN VDE 0682-401 and
EN 61234-3:2010
n
Safety rated CAT IV 600 V,
CAT III 690 V
n
Safety rated CAT IV 600 V,
CAT III 690 V
Voltage testers
n
5
Multifunction Installation Testers
The Telaris ProInstall Series offers testers for
virtually all electrical wiring installations residential, commercial or industrial. With
all the test functions you need, from
phase rotation test to built-in memory
for documenting results, the Telaris
ProInstall series is the complete solution
for professionals who demand safety and
accuracy.
6
Multifunction
Installation Tester
The everyday tester for electrical installers. Ideal for domestic
applications. Covers the basic requirements for testing.
Telaris
ProInstall -200
Multifunction
Installation Tester
w/type-B RCD & Earth Test
The ideal tester for professionals with RCD type B, earth
resistance and additional memory, the ProInstall-200
is the ideal tester for professional electricians working
in both domestic and commercial applications.
n
L ightweight and compact for portability
n
n
Simple, intuitive interface
n
n
Fast, high current loop test
n
No trip loop test, does not trip RCDs
n
Easy to read, large backlit LCD display
n
n
Data logging capabilities with PC download
Tests electrical installations per regulatory
standards: DIN VDE 0100, ÖVE E 8001,
NIV/NIN 2010, BS 7671, IEC 60364
n
Safety rated to: CAT III 500V, CAT IV 300V
Additional Features
n
Insulation resistance measurements up to 1000V DC
Lightweight and compact for portability
Simple, intuitive interface
n Auto-sequence measurements allow more
efficient testing
n Fast, high current loop test
n No trip loop test, does not trip RCDs
n Easy to read, large backlit LCD display
n Data logging capabilities with PC download
n Tests dc sensitive RCDs (type B)
n Tests electrical installations per regulatory
standards: DIN VDE 0100, ÖVE E 8001,
NIV/NIN 2010, BS 7671, IEC 60364
n Safety rated to: CAT III 500V, CAT IV 300V
Multifunction Installation Testers
Telaris
ProInstall -100
Additional Features
n
Insulation resistance measurements up to 1000V DC
n
Low Ohm resistance
n
Low Ohm resistance
n
Loop impedance
n
Loop impedance
n
Test dc sensitive RCDs: Type A
n
Earth ground resistance
n
Phase sequence
n
Test dc sensitive RCDs: Type A and B
n
Phase sequence
vailable in:
A
ProInstall-100-EUR, ProInstall-100-D,
ProInstall-100-CH, ProInstall-100-DK
Available in:
ProInstall-200-EUR, ProInstall-200-D,
ProInstall-200-CH
*Check with your local distributor for availability.
For UK: please contact your local distributor for
specific 17th Edition test solutions.
*Check with your local distributor for availability.
For UK: please contact your local distributor for
specific 17th Edition test solutions.
7
Clamp Meters
Beha-Amprobe is renowned around
the world for innovative Clamp Meters.
Please find here a selection of our high
performance Clamp Meters.
ACD-10 PLUS
8
Current clamp up to 600 A (AC)
with thin jaws of 25 mm
Current clamp with dual
display up to 600 A (AC)
n
Current, voltage and
resistance measurement
ACDC-400
Clamp Multimeter
400A (AC/DC)
n
C
urrent, voltage and
resistance measurement
n
Continuity test with beeper
n
C
ontinuity test with beeper
n
Capacitance and frequency
measurement
n
Automatic and manual
range selection
n
Temperature measurement
n
Integrated measurement
memory (data hold, MIN/MAX)
n
Measurement of inrush current
n
Automatic range selection
n
Relative measurement
n
Integrated measurement
memory (data hold and
MAX hold)
n
Additional bar graph display
n
Jaw opening: 26 mm
n
Auto power-off
Additional Features
Dual display
n A measurement range for
direct measurement of
ionisation currents in
heating systems
n
ACD-20SW
Swivel Clamp Meter
400A (AC)
n
Measures current, voltage
n
n
Jaw opening: 30 mm
Auto power-off
Additional Features
AC/DC clamps are also
suitable for automotive
applications, emergency
power supplies and
solar technology
n Backlight
n
ACDC-100
Clamp Multimeter
1000A (AC/DC)
n
and resistance
Current, voltage and
resistance measurement
n
Audible continuity test
n
Continuity test with beeper
n
Diode test
n
Measurement of inrush
current (30 ms)
n
n
Auto and manual ranging
Measured data storage
(data hold)
n
Accomodates conductors
up to 30 mm in diameter
n
Auto power-off
Additional Features
n
180 degree rotating head
for the perfect display
n
dvanced VoltTect nonA
contact voltage detection
Clamp Meters
ACD-14 PLUS
Automatic and manual
range selection
n
n
n
n
Integrated measurement
memory (data hold)
Jaw opening: 50 mm
Auto power-off
Additional Features
n
Large, clear display
9
ACD-50NAV
600A AC Navigator Clamp
AC50A
Leakage Clamp Meter (AC)
Current, voltage and
resistance measurement
n Measurement of
active power (W)
n Measurement of the
power factor cos φ
n Acoustic continuity test
n Capacity and frequency
measurement
n Memory, data hold
n Peak value measurement
n Low Pass frequency filter
n Large bargraph display
with background light
n Clamp opening 37 mm
n Auto power-off
n
n
THD measurement
Measurement of the
inrush current
n Display of the rotary
field direction
n Automatic measuring
range selection
n TRMS measurement
n
n
1000A AC/DC TRMS
Navigator Clamp
Current, voltage and
resistance measurement
n Acoustic continuity test
n Capacity and frequency measurement
n Temperature measurement
n Measurement of effective power (W)
n Measurement of the power factor cos φ
n Measurement of the inrush current
n Display of the rotary field direction
n Automatic measuring range selection
n Memory, data hold
n Peak value measurement
n Low Pass frequency filter
n
Large bargraph display with
background light
n Clamp opening 42 mm
n Auto power-off
n
10
Additional Features
n Real effective value measurement AC+DC (TRMS)
n Contactless voltage detection
n Measurement point illumination by means of white LED
n
Voltage and resistance measurement
n
Continuity test with beeper
n
Manual range selection
n
Integrated measurement
memory (data hold)
n
MIN/MAX and relative
value measurement
n
Additional bar graph display
n
Jaw opening: 30 mm
n
Auto power-off
Additional Features
Additional Features
n Real effective value measurement AC+DC (TRMS)
n Contactless voltage detection
n Measurement point illumination by means of white LED
ACDC-54NAV
Leakage current measurement
n
Minimum resolution: 0.01 mA
n
Range of applications:
measurement of leakage
or fault currents, current
consumption of devices in
(customer) service sector
without breaking the circuit
LH41
Current Clamp Meter AC/DC
n
Current measurement
from 1 mA AC and DC
n
Manual range selection
n
Jaw opening: 19 mm
n
Automatic zero-point (DC
measurement range)
n
Integrated 5 s measurement
memory (data hold)
n
Auto power-off
Additional Features
n
Minimum resolution: 1 mA
n
Shielded against external
interference
Digital Multimeters
Beha-Amprobe offers a wide range of
Digital Multimeters that offer functions
for every application. These tough
meters are designed to be a reliable,
feature-rich, and rugged solution
for taking critical measurements
in residential, HVAC, electrical and
industrial settings at breakthrough
affordability.
11
AM-500-EUR
Compact Size DMM
AM-510-EUR
DMM
n
600V AC/DC
n
10A AC/DC
n
Autoranging feature
automatically sets up
voltage, current, and resistance ranges for you
Voltage up to 600V AC/DC
Resistance
Audible continuity
Diode test
Data hold
Auto power-off
Low battery warning
n
Safety rated: CAT III 600V
n
n
n
n
n
n
n
Contents
n
Capacitance
and frequency
measurement
n
Temperature measurement
n
Automatic and manual
range selection
n
Auto power-off
n
Battery test (1,5V and 9V)
n
Non-contact voltage detection
n
Built-in flashlight
Contents
Model AM-510 EUR
n
Model AM-500 EUR
n
n
Test leads
n
Test
n
AAA x 2
n
1 x 9V (6F22) battery (installed)
n
Users manual
n
Users
manual
AM-520-EUR
AM-530-EUR
DMM
n
n
DMM TRMS
50V AC/DC
7
10A AC/DC
n
Capacitance and frequency
measurement
n
Temperature measurement
n
Automatic
leads
and manual
range selection
n
AC 750V/DC 1000V
n
10A AC/DC
n
TRMS measurement
n
Capacitance and frequency
measurement
n
Temperature measurement
n
Automatic and manual
range selection
n
Auto power-off
n
Non-contact voltage detection
n
Auto power-off
n
Built-in flashlight
n
Non-contact voltage detection
n
Built-in
Contents
Contents
n
Model AM-530 EUR
n
Test leads
1 x Temperature probe
n
1 x Temperature probe
n
Carrying case
n
Carrying
n
1 x 9V (6F22) battery (installed)
n
1 x 9V (6F22) battery (installed)
n
Users manual
n
Users manual
n
Hang strap
n
Hang strap
n
Model AM-520 EUR
n
Test
n
12
flashlight
leads
case
DMM
n
n
n
n
n
n
n
n
n
AM-550-EUR
DMM TRMS
1000V AC/DC
10A AC/DC
Low pass filter for variable
frequency drives
Capacitance and frequency
measurement
Temperature measurement
Automatic and manual
range selection
Auto power-off
Non-contact voltage detection
Built-in flashlight
n
1000V AC/DC
10A AC/DC
n TRMS measurement
n Low pass filter for variable
frequency drives
n Capacitance and frequency
measurement
n Temperature measurement
n Automatic and manual
range selection
n Non-contact voltage detection
n Built-in flashlight
n
Contents
Model AM-550 EUR
n
Test leads
n 2 x Temperature probe
n Carrying case
n 1 x 9V (6F22) battery (installed)
n Users manual
n Hang strap
Contents
n Model AM-540 EUR
n Test leads
n 2 x Temperature probe
n Carrying case
n 1 x 9V (6F22) battery (installed)
n Users manual
n Hang strap
DM73C
Pen Probe Style
Digital Multi-Tester
600 V AC and 600 V DC ranges
Cat III 300 V safety rated
n Cat II 600 V safety rated
n Improved DC basic accuracy 0.5%
n Resistance to 34 MW
n Continuity beeper
n Includes alligator clip,
ground test lead, spare probe
tip and installed batteries
n 3400-count digital display
plus analog bargraph
n Auto power-off
n UL 3111-1 listed
n
n
n
PM55A
Digital Multimeter
AutoTect™ feature directs
the meter to know if it
is measuring AC volts,
DC volts or resistance
with no user interface
n The AutoTect™ feature has
lower input impedance which
zero out ghost voltages
n Measures AC/DC current,
capacitance, frequency,
continuity with beeper plus
includes Voltect,™ a built-in,
non-contact voltage detector
n
Large oversize digital display
n Protective silicon holster
included, attached test
leads, battery, deluxe
carry case and manual
Digital Multimeters
AM-540-EUR
n
13
Temperature Measurement
The Beha-Amprobe series of infrared
and contact thermometers are a
complete line of high performance
diagnostic tools designed for HVAC/R,
electrical, industrial maintenance
applications.
14
IR-710-EUR
IR-720-EUR
Infrared Thermometer (10:1)
Infrared Thermometer (20:1)
E xtremely accurate and reliable
Precise measurement with
distance to spot ratio 10:1
n Wide temperatures ranges
available up to
-18°C to 380°C
(-0°F to 716°F)
n Rapid response time
n Laser pointer for accurate targeting
n 8 seconds auto display
hold for easy read-out
n Adjustable emissivity for
measuring a variety of materials
n Dual LCD display with backlight
n Selectable ˚F and ˚C
E xtremely accurate and reliable
P recise measurement with
distance to spotratio 20:1
n W
ide temperatures ranges
available up to
-32°C to 1050°C
(-26°F to 1922°F)
n R
apid response time
n Laser pointer for accurate targeting
n 8
seconds auto display hold
for easy read-out
n A
djustable emissivity for measuring
a variety of materials
n D
ual LCD display with backlight
n S
electable ˚F and ˚C
n
n
n
n
Infrared Thermometer (12:1)
Similar as IR-710-EUR, with additionally:
n Extremely accurate and reliable
n Precise measurement with distance to spot ratio 12:1
n Wide temperatures ranges available up to
-18°C to 550°C (-0°F to 1022 °F)
IR-750-EUR
Infrared Thermometer (50:1)
IR-730-EUR
Infrared Thermometer (30:1)
Extremely accurate and reliable
Precise measurement with
distance to spot ratio 30:1
n Wide temperatures
ranges available up to
-32°C to 1250°C
(-26°F to 2282°F)
n Rapid response time
n Laser pointer for accurate targeting
n 8 seconds auto display
hold for easy read-out
n Adjustable emissivity for
measuring a variety of materials
n Dual LCD display with backlight
n Selectable ˚F and ˚C
n
n
Extremely accurate and reliable
n Precise measurement with
distance to spot ratio 50:1
n Wide temperatures
ranges available up to
-50°C to 1550°C
(-58°F to 2822°F)
n R
apid response time
n Laser pointer for
accurate targeting
n 8
seconds auto display
hold for easy read-out
n Adjustable emissivity for
measuring a variety of materials
n Dual LCD display with backlight
n Selectable ˚F and ˚C
n Stores up to 99 data points
n Thermocouple input
n USB interface
Temperature measurement
IR-712-EUR
n
15
IR-450-EUR
IR608A
Pocket Infrared
Thermometer
Infrared Thermometer
Laser Pointer
n
IR pocket thermometer with n
8:1 distance to spot ratio
n
Selectable °F / °C
n
Holds temperature measurement
n
Bright laser pointer
n
Built-in LED flashlight to Switchable between °C
and °F measurement
reading for 10 seconds
n
Non-contact temperature
n
Integrated measurement
memory (data hold)
illuminate dark areas
n
Backlight
n
Distance to spot size ratio: 8:1
n
Auto power-off
Additional Features
n
Laser-based targeting
n
Handy and compact
“pistol grip” design
TMD-50
Thermometer
TMD-50, Type K
Dual (Temperature measurement
with connection for two sensors)
n -60 to 1350 °C, -58 to 2498 °F
n Measurement of the
temperature difference
n Connection for two
temperature sensors type K
n Switchable for measurement
in °C or °F
n Integrated measurement
memory (data hold)
n MIN/MAX and relative
value measurement
n Measurement of the
average temperature
n Backlit display
n Auto power-off
TH-3
Relative Humidity
Temperature Meter
n
Additional Features
n Best precision 0.1%
n T1-T2 (temperature
difference)
n Shock and impactresistant by standard
protective cover
16
n
Dual display
n
Relative function monitors
humidity and temperature
changes
n
Extended probe stem to easily
access air ducts
n
Min/Max readings
Data Hold
n
Capacitive sensor with
protective cover
n
n
Auto power-off
Soft carrying case
Other test equipment
Need something a little different?
Always check the Beha-Amprobe range.
This section has a selection of other
Beha-Amprobe test equipment for
electrical and HVAC applications.
17
LAN-1
Lan Cable Tester
Test pin configuration for:
10/100 base -T cable
10 base-2 cable RJ45
modular cables AT&T
258A cable EIA/TIA
568A/568B cables
Token Ring Cable
n Verify the cable wiring for
continuity, opens, shorts
or incorrect wiring
n Test installed cable on wall
plate or the patch panels
by using the Remote
Termination module
n Perform Loopback Test
or Remote Test
n Buzzer sound warning for
error condition in cable
n Two sets of LED lights for
Source and Test indication
LM-100
Light Meter Manual Ranging
n
n
Light measurement
n
0 -200,000 lux
n
Manual range selection
n
Silicon sensor
n
Integrated measurement
memory (data hold, MAX)
LM-120
Light Meter with
Auto Ranging
n
Measure in Lux or Footcandles, front panel switchable
n
Measuring Range to 200,000 Lux or 20,000 Foot candles
GT-400
n
Silicon photodiode sensor
n
Data Hold to freeze reading and filter
Portable Appliance Tester
on the digital display
n
MIN / MAX ability to show
high and low readings
n
Intuitive and simple to use
Easily portable for on the
go testing
n Fast answers - Instantly
measures safety and integrity
of electrical appliances
n Measures earth ground resistance
n Insulation resistance
measurements up to 500V
n Substitute Leakage
Current measurements
n Protective Conductor
Current measurements
n Rugged with high quality
construction for years of service
n Tests appliances for safety
in accordance with the IET
Code of Practice, EN 61010/
DIN VDE 0701-0702 (BGV
A3) Safety Standards
n
18
*In three types available: German/
Swiss/UK Schuko receptacle.
Please check with your local
distributor for availability.
n
Autoranging plus Manual Range
n
Zero function to null display
before a reading
TMA10
n
Auto power-off
Anemometer Thermometer
Anemometer with remote vane
easure CFM by inputting
M
the vent dimensions
n
Obtain air flow average by
taking up to eight data points
n
Vane has three foot cord for
measurement flexibility
n Deluxe carrying case
n Measure air velocity
or air flow
n
RS232 interface output
with optional software
and cable, TM-SWA
n
Continuous moving average
for up to 2 hours
n
TACH20
Combo Tachometer
Measures rotational and surface speed
n Built-in memory
n Digital Display
n Auto power off function
n Easy to select units and mode functions
n Contact and
non-contact measurement
n Select rpm using
infrared beam or adapter:
m/min, m/sec, ft/min, ft/
sec, in/min, m, ft, and in.
n Includes 6 adapters, carrying case, reflective tapes, batteries and user manual
n
Lamp Tester
n
Determine if fluorescent light
bulbs are operational prior
to installation or removal
n
Verify voltage presence without
the need for another tool with
built-in VolTect™ non-contact voltage detection
n
Increase productivity
by minimising trips up
and down a ladder
n
All tests performed with easy,
single button operation
n
Ultra-compact design
for portability
n
Industry
leading 122 cm
(48”) removable, fully
retractable antenna
Sound Meter
n
Insulated antenna sleeve
for safe testing
Measurement of sound level
30-130 dB
n Measurement according to
frequency evaluation filters A
and C, with direct display in dB
n
Integrated measurement
memory (data hold, MAX)
n Switchable between fast
and slow response times
n Backlight
n
n
TMA-21HW
Hot Wire Anemometer
n
Other Test Equipment
SM-10
LT-10-EUR
Highly accurate thermometer with 0.1% basic accuracy for precise measurements
n
Fast response telescopic probe for use in hard to reach places
PQ55A
Compact Power Analyser
n
Air Flow Volume (CFM, CMM)
n
Instant, Avg, 2/3 Vmax Flow Measurements
n
Relative Humidity and Temperature Measurement
n
n
n
n
Comprehensive real time
monitoring, recording and
analysis of three phase power systems
True-rms voltage and current measurement
Power Factor and phase angle results
Power Analysis (apparent, active and reactive power)
n
Data hold & MAX/MIN
n
Data Memory and Real function (99 sets)
n
512KB auto data logging capacity
n
Large back-lit LCD display with 5 parameters
n
Auto Power ON / OFF setting
n
USB interface
n
Simple and safe to use
19
Solar-100
Radiation meter
n
n
n
n
n
n
n
Measuring solar radiation
Determining the light
transmittance of windows and panes (g factor)
Switchable display W/m²
or BTU / (ft² x h)
Manual measurement
range selection
Integrated measured
value memory (data hold)
MAX/MIN function
Manual zero calibration
Solar-4000
Peak performance
and I-V characteristic
curve analyzer
AT-3500
Cable Locator
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Quick and precise measurement
- approx. 15...30 s
Simple identification of errors
and defects affecting PV
systems and modules
Very light and easy-to-handle
Wireless communication
between ANALYZER
and SENSOR
Contactless temperature
measurement
n
n
n
n
Measurement of monocrystalline
and polycrystalline cells
(measurement of thinlayer modules on request,
without STC computation)
Easy menu guidance
via colour touch screen
Reporting: system and
maintenance certificates
Comparison check
Built-in battery
Evaluation software
(5000 data points)
Regularly available module
data updates free of charge
Quick and easy sensor
assembly using quickfix mounting
Additional Features
Ready for use with
transmitter, receiver
and test accessories
Three testing modes
available for best accuracy:
- Passive power
- Passive radio
- Active with signal generator
Transmitter with voltage
proof output
Extensive accessories available
n
n
n
n
MT-204-S
Machinery Tester
n
n
n
n
n
n
n
n
20
Locates underground wires,
cables and pipes
Simplified tracking feature
allows localization of
tap or pipe damage
Determine the location,
depth and orientation
of metallic wires
Optical and acoustic indicator
Large display with easy menu
and backlight function
Rugged design for
use in bad weather and
harsh environments
In accordance with
EN 60204-1
Measurement of protective
earth resistance
n
High-voltage test
10 A and 0.2 A test current
for protective earth resistance
Loop/line impedance
measurement up to 440 V
Display of short circuit
current (PSC)
Insulation measurement with
250 V to 500 V test voltage
Residual voltage
measurement; display of
discharge voltage/time
Integrated high-voltage
test (can be deactivated
via key switch)
Technical Specifications
Multifunction Installation Testers
Specifications
Display
LCD display , 4 -digit, 9999 counts
Voltage
50 .. 500 V/1V AC
Frequency
45.0 ... 65.0 Hz / 0.1 Hz
Loop resistance
0.15 ... 20/200/200 Ω
0.01 / 0.1 / 1 Ω
Short-circuit current
0 .. 10 kA
Voltage range
100 .. 500 V 50/60 Hz
Test about
7 A ( at 230 V)
Internal line resistance
0.15 ... 20/200/200 Ω
0.01 / 0.1 / 1 Ω
Short-circuit current
0 .. 10 kA
Input voltage range
100 .. 500 V 50/60 Hz
Test current
Insulation resistance
Test voltage
Low Ohm resistance
Test current
RCD/FI-Nominal residual current factors
7 A ( at 230 V)
5 mA (at 230 V)
0 .. 1000 milliohms
0.01 / 0.1 / 1 M
100, 250 , 500, 1000 V DC
0.05 ... 20/200/2000 Ω
0.01 / 0.1 / 1 Ω
> 200 mA DC
10 , 30, 100 , 300, 500, 1000 mA
x0.5, x1, x5 and AUTO
RCD / FI- types:
standard AC , selective, pulsed signal, Type B (only Proinstall -200)
Measurement functions
contact voltage , trip time , tripping current test, increasing test
Contact voltage
0 .. 50V
Tripping time
1 .. 510 ms / 1 ms
Tripping current measurement
30 .. 110% of IDN (in 10 % increments)
Phase sequence test
Input voltage range
100 .. 500 V 50/60 Hz
Ground resistance
0.05 Ω ... 200 /2000 Ω
Probe resistance
0.1 ... 52 KΩ
Maximum measuring current
3.5 mA
Measuring voltage
25 V
Frequency
128 Hz / 140 Hz
General specifications
Memory
400 or 1000 readings
Interface
IR / USB
Built according to
DIN VDE 0411/EN61010/IEC61010 DIN VDE 0413/EN61557/IEC61557
Measurement Category
CAT III/500 V , CAT V IV/300
Degree of Pollution
2
Protection Class
IP 40
Power Supply
6 x 1.5 V battery , IEC LR6
Dimensions
110 × 260 × 130 mm
Weight
approx 1500g (incl. batteries)
21
Clamp-on Meters
Clamp Multimeter Comparison Guide
Display
Current AC
Tolerance
Measurement Ranges
Frequency Range
ACDC-400
ACD-20SW
ACDC-100
ACD-50NAV
LCD, 33/4-digit,
4000 digits
LCD, 3¾ Digit,
3999 Count
LCD, 3¾ Digit,
3999 Count
LCD, 3¾ Digit,
4000 Count
LCD, 3¾ Digit,
4000 Count
0.01 - 600 A
0.01 A - 400 A
0.01 - 400 A
0.1 A - 800 A
0.01 - 600 A
±(1.9% rdg. + 8 digits)
±(1.5% rdg. +3 Digits)
±(2% rdg +6 Digits)
±(1.5% rdg. +5 Digits)
±(1.5 % rdg. +5 Digits)
50/60 Hz
50/60 Hz
50-60 Hz
Current DC
-
0.01 A - 400 A
-
0.1 A - 1000 A
Tolerance
-
±(1.5% rdg. +3 Digits)
-
±(1.5% rdg. +4 Digits)
-
0.001 - 600 V
0.1 mV - 600 V
1.0 mV-600,0 V
0.1 mV - 600 V
0.01 - 1000 V
Voltage AC
Tolerance
50 Hz - 400 Hz
-
±(1.5% rdg. + 5 digits)
±(1% rdg. +3 Digits)
± (1.2% rdg +5 Digits)
±(1% rdg. +4 Digits)
±(1 % rdg. +5 Digits)
Frequency Range
50 - 400 Hz
50 - 500 Hz
50 - 500 Hz
50 - 500 Hz
50 Hz - 500 Hz
Voltage DC
0.1 - 600 V
0.1 mV - 600 V
0.1 mV - 600 V
0.1 mV - 600 V
0.01 - 1000 V
±(0.5% rdg. + 3 digits)
±(0.8% rdg. +2 Digits)
±(0.5% rdg +2 Digits)
±(0.5% rdg. +3 Digits)
±(0.7 % rdg. +2 Digits)
Continuity
R < 120 Ω
R < 40 Ω
R < 25 Ω
R < 120 Ω
R < 30 Ω
Frequency
0.001 Hz - 100 kHz
-
-
-
20,00 - 9,999 kHz
0.1–99.99 kΩ
Tolerance
Resistance
0.1 - 40.00 MΩ
0.1 Ω - 40 MΩ
0.1 Ω - 40 MΩ
0.1 Ω - 40.00 MΩ
Tolerance
±(0.8% rdg. + 6 digits)
±(1% rdg. +3 Digits)
±(1.0% rdg +4 Digits)
±(0.8% rdg. +6 Digits)
-
Capacity
0.1 nF - 3000 μF
-
-
-
-
Active Power
-
-
-
-
0 - 600.0 kW
Cos Phi
-
-
-
-
-1.00–0.00 – +1.00
Harmonics
-
-
-
-
display up to the 25th
Ø 26 mm
Ø 30 mm
Ø 30 mm
Ø 50 mm
Ø 37 mm
2
2
2
2
2
CAT III/600 V
CAT III/600 V
CAT lll/600 V
CAT III/600 V
CAT IV 600V,
CAT III 1000V
EN 61010/IEC 61010
DIN VDE 0411,
EN 61010, IEC 61010
DIN VDE 0411,
EN 61010/IEC 61010
DIN VDE 0411,
EN 61010, IEC 61010
DIN VDE 0411,
EN 61010, IEC 61010
2 x 3 V battery,
IEC CR2032
2 x Battery 1.5 V,
IEC LR03
2 x Batterie 1.5 V,
IEC LR03
2 x Battery 1.5 V,
IEC LR03
1 x Battery 9 V,
IEC 6F22
190 x 63 x 32 mm
205 x 64 x 39 mm
240 × 70 × 41 mm
227 x 78 x 40 mm
260 x 80 x 40 mm
approx. 200 g
approx. 280 g
approx. 220 g
approx. 290 g
approx. 480 g
Jaw Opening
Pollution Degree
Features
ACD-14 Plus
Overvoltage Category
Safety
Power Supply
Dimensions
Weight
Clamp Multimeter Comparison Guide
Display
Current AC
Tolerance
Frequency Range
Measurement Ranges
AC50A
LCD, 3¾ Digit,
4000 Count
LCD, 3¾ Digit,
3999 Count
0.01-1000 A
0.001 - 40 A
0.01 mA - 60 A
±(1.5 % rdg. +5 Digits)
±(1.3 % rdg. +5 Digits)
±(1.5% rdg. +5 Digits)
50 Hz - 400 Hz
40 - 400 Hz
40 Hz - 1 kHz
-
0,001 - 40 A
-
Tolerance
-
±(1.3 % rdg. +5 Digits)
-
0,01 - 1000 V
-
0,1 - 400 V
±(1 % rdg. +5 Digits)
-
±(2% rdg. + 4 Digits)
50 - 500 Hz
-
40 Hz - 1 kHz
0.01 - 1000 V
-
-
±(0.7% rdg. +2 Digits)
-
-
Continuity
R < 30 Ω
-
R < 40 Ω
Frequency
20.00 - 9.999 kHz
-
-
Resistance
0.1–99.99 kΩ
-
0.1 - 400 Ω
Tolerance
±(1% rdg. +5 Digits)
-
±(1% rdg. +2 Digits)
Capacity
-
-
-
0 - 999.9 kW
-
-
-1.00–0.00 – +1.00
-
-
Tolerance
Frequency Range
Voltage DC
Tolerance
Active Power
Cos Phi
Harmonics
Temperature
Input Impedance
Jaw Opening
Pollution Degree
Features
LH41
LCD, 3¾ Digit,
4000 Count
Current DC
Voltage AC
22
ACDC-54NAV
Overvoltage Category
Safety
Power Supply
Dimensions
Weight
display up to the 25th
-
-
-50 °C-1000 °C
-
-
-
-
10 MΩ
Ø 37 mm
Ø 19 mm
Ø 30 mm
2
2
2
CAT IV 600V,
CAT III 1000V
CAT III/600 V
CAT III/600 V
DIN VDE 0411,
EN 61010/IEC 61010
DIN VDE 0411,
EN 61010, IEC 61010
DIN VDE 0411
EN 61010, IEC 61010
1 x battery 9 V,
IEC 6F22
1 x Battery 9 V,
IEC 6LR61
2 x Battery 1.5 V,
IEC LR6
260 x 80 x 40 mm
184 x 71 x 31 mm
210 x 62 x 36 mm
approx. 480 g
approx. 235 g
approx. 200g
Digital Multimeters
AM-500-EUR
AM-510-EUR
MULTIMETER TYPE
Autoranging
Com / Res
CAT III 600V
600
600
10
10
20
750
1000
10
10
40
Safety Rating
Safety
Measure voltage in noisy environments
True-rms
Electrical panels, AC outlets
DC systems, auto/marine batteries
AC Current - electrical panels, appliances
DC Current - electronics, DC motors
Specified resistance and continuity
Flame sensors
Diodes in AC to DC converters
Fuses, lightbulbs, wire connections
AC Voltage (V)
DC Voltage (V)
AC Current (A)
DC Current (A)
Resistance (MOhms)
Microamps
Diode Test
Continuity
Household batteries
Battery test
Motor startup or run capacitors
Capacitance
Frequency verification
Frequency
Non-contact voltage test
AM-520-EUR
AM-530-EUR
AM-540-EUR
AM-550-EUR
HVAC
Electrical
Adv. HVAC
Industrial
CAT III 600V
CAT III 600V
CAT II 1000
CAT III 600V
CAT II 1000
CAT IV 600
CAT III 1000
CAT IV 600
CAT III 1000
600
600
10
10
40
750
1000
10
10
40
1000
1000
10
10
60
1000
1000
10
10
60
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Non-contact voltage
n
n
n
n
n
Electrical load-time on vs time off
Duty cycle
n
n
n
Temp of air vents, fuses, transformers
Temperature inputs
2
2
Automatically selects measurement range
Autoranging
Manually select measurement range
Manual ranging
Voltage on variable frequency drives
Low pass filter
Detect stray voltages
Low Z
Dimly lit areas
Built-in flashlight
Meter resolution
LCD Counts
Dimly lit areas
Backlight
Monitoring fast changing signals
Bar graph
Two relative measurements on one screen
Dual display
Data memory
Data hold
Difference between two measurements
Relative reading
Max/min peak measurement
Max/min hold
Specialised signal measurements
Peak hold (crest)
1
n
1
n
n
n
n
n
n
n
n
n
n
n
2.000
n
n
n
n
n
4.000
4.000
4.000
6.000
6.000
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Portable Appliance Testers
Other Test Equipment
GT-400
Solar-4000
Specifications GT-400
Protective conductor resistance
Insulation resistance
Substitute leakage current
Supplied with
0.10 ... 2.00 Ω ± (5% + 10 digits)
0.100 ... 9.999 MΩ, 10.00 ... 20.00 MΩ ± (5% + 2 Digits)
0.100 ... 9.999 mA, 10.00 ... 20.00 mA ± (5% + 2 Digits)
Test leads, alligator clip, test probe, IEC lead, carrying
case, 6 AA batteries, users manual
Protective Conductor Resistance
Measuring range
Display range
Resolution
Tolerance
Measuring current / voltage
0.10 ... 2.00 Ω
0.05 ... 2.00 Ω
0.01 Ω
± (5% + 10 digits)
Min. ± 200 mA DC / > 4 V
Insulation Resistance
Measuring range
Display range
Resolution
Tolerance
Measuring current / voltage
0.1 ... 20 MΩ
0.1 ... 20 MΩ
0.1 ... 9.999 MΩ 0.001 MΩ / 10.00 ... 20.00 MΩ 0.01 MΩ
± (5% + 2 digits)
Min. 500 V DC / >1 mA
Substitute Leakage Current
Measuring range
Display range
Resolution
Tolerance
Measuring current / voltage
0.1 ... 20 mA
0.1 ... 20 mA
0.1 ... 9.999 mA 0.001 mA / 10.0 ... 20.00 mA 0.01 mA
± (5% + 2 digits)
Approximately 32 V AC
General Specifications
Power supply
Degree of pollution
Overvoltage category
Protection degree
Protection class
Electrical safety
EMC emission
EMC interference resistance
Dimensions (L x W x H)
Weight
6 x 1.5 V Batteries (IEC LR6 (AA)
6 x 1.2 V NiMH rechargeable batteries
2
CAT II 300 V
IP40
II
EN61010-1/VDE0411
EN61000-6-3
EN61326-1
Approximately 265 x 110 x 50 mm
Approximately 700 g
*In three types available: German/Swiss/UK Schuko receptacle.
n
n
Specifications
n
n
n
n
Technical specifications
Events
Display
Features
Functions
Series Selection Guide
Solar-4000 Analyzer Solar-4000 Sensor
I-V characteristic curve, short circuit
Global irradiation, module temperature,
Measurement
current, open circuit voltage, power,
inclination angle
MPP current, MPP voltage
STC values (short circuit current, open
circuit voltage, MPP current, MPP voltCalculated values
age), fill factor, MPP power, manufacturer‘s ideal characteristic curve
Voltage measurement range
1.0…1000 V (< ±1 %) (Uoc > 5 V)
Current measurement range
0.1…15.0 A (< ±1 %)
0…100 °C (±3 % with referTemperature measurement range
ence to a black body)
Irradiation measurement range
100…1200 W/m² (±5 %)
Standard 4 mm test leads to
Measuring connection
Infrared (contactless)
PV module
Characteristic curve measurement
approx. 15…30 seconds
duration
dependent on SD memory card
Storage space for measurement
size (> 1000 measurement
curves
curves per GB)
Reference cells
Display
Power supply
Auto-Power-Off
Interface
Ambient temperature
Protection degree
Protection class
Measurement category
Dimensions (L / W / H)
Weight
Warranty
Safety according to
–
3.2“ colour LCD touch screen (240 x
320 pixels, RGB)
Lithium polymer accumulator,
operating time approx. 8 hours
adjustable (1…15 minutes)
Wireless connection to
SENSOR, SD/SDHC memory
card for PC
0…+50 °C
IP20
Class II
CAT II / 1000 V, CAT III / 600 V
210 mm / 105 mm / 41 mm
approx. 500 g
2 years
EN 61010-1, EN 61010-31
1 x monocrystalline cell, 1 x
polycrystalline cell
S/W LC display (2 lines, 16 characters)
Lithium polymer accumulator,
operating time approx. 8 hours
Wireless connection to
ANALYZER
0…+60 °C
IP20
160 mm / 82 mm / 41 mm
approx. 200 g
2 years
23
2014 | 2015
Product Catalogue
Beha-Amprobe®
In den Engematten, D-79286 Glottertal, Germany
Web: www.beha-amprobe.com
Tel: +49(0)7684 8009-0
13059-ENG
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement