Phonak EasyLink FM transmitter, iLink, MicroLink MLxS FM receiver User Guide

Below you will find brief information for FM transmitter EasyLink, FM receiver iLink, FM receiver MicroLink MLxS. EasyLink is a digital FM transmitter that provides clear, high-quality sound directly to your iLink or MicroLink radio receivers. EasyLink can be used in a variety of situations, such as at business meetings, in restaurants, in conferences, at home, while watching television or listening to music, while walking, playing sports, or traveling with a partner. EasyLink can also be used with an external microphone for optimal speech quality in educational settings.

PDF Download
Document
EasyLink User Guide | Phonak | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Easy to operate
  • High sound quality
  • Long battery life
  • Wide operating range
  • Compatible with iLink and MicroLink receivers
  • Can be used with an external microphone

Frequently asked questions

Plug the charging unit into the power socket. Attach the EasyLink adapter and plug the charging unit into the power jack on the adapter. The battery symbol in the EasyLink display flashes during charging. The battery cannot be overcharged. The battery symbol stops flashing when the EasyLink is 100% charged. The EasyLink operates for approximately 10 hours when fully charged. Make sure the socket outlet is easily accessible.

To switch on: Press and hold the button for two seconds. To switch off: Press and hold the button again for two seconds. The display shows startup information during switch-on. When the EasyLink is ready, the following information appears: FM channel number and Battery status.

The effective operating distance between the EasyLink and the user wearing iLink or any MicroLink receivers: Open air – up to 30 meters (100 ft) Inside a building – typically up to 15 meters (50 ft)

Using a pen, press the push button, as pictured. After one second, the channel displayed in the LCD will change. Hold the button down until the desired channel is displayed. Release the button. The channel number in the LCD will stop blinking after a few seconds. Set the default channel of the iLinks or MicroLink receivers to the same channel using the FM Successware.
Preparing document for printing…
0%