Quoizel HS8602BN Hollister 2-Light Brushed Nickel Vanity Light Instructions
Quoizel HS8602BN is an indoor light fixture that can be mounted to a ceiling or wall. It comes with two A19 medium base sockets, each of which can accommodate a 100W bulb (not included). The fixture has a brushed nickel finish and comes with two shades. It is 9.5 inches high, 5 inches in diameter, and has a 6.75-inch extension from the wall or ceiling. The fixture is easy to install and comes with all the necessary hardware. It is perfect for use in hallways, bedrooms, living rooms, and other indoor spaces.
Advertisement
Advertisement
Installation Guide #IS-HS8602BN
For Style HS8602BN
Please go to www.quoizel.com
for product cleaning tips. Go to the Care + Maintenance selection.
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Light Source: (2) A19 Medium Base 100W bulb Maximum, bulb not included.
Estimated Assembly Time: 30-45 minutes
Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to ensure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Missing Parts? Contact your original place of purchase.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Package Contents
A
STEP 3
-
Install Fixture Body
A. Place the Backplate and the
Fixture Body (E) over the
Crossbar (A). Line up Holes on the side of backplate and the
Mounting Hole on the Crossbar
(A). Secure by threading Lock
Screws (B) into the Crossbar (A).
Tighten until sung.
B
Lock Screw x 2 D
Shade x 2
E Fixture Body x 1
STEP 1
-
Install the Crossbar to the junction box
A. Attach the Crossbar (A) to the Outlet Box with the head of the Green
Ground Screw facing you. Secure it with Outlet Box Screws (not included), tighten until snug
.
STEP 4 - Install Shades and
Bulbs
A. Position the Shade (D) over the
Socket as shown. Secure the
Shade (D) by threading the
Socket Collar (C) onto the
Socket. Hand tighten until snug.
B. Insert bulbs onto sockets and screw snugly into place.
Your fixture is now assembled and ready to use. Enjoy!
Outlet Box Screw
(not included)
Outlet Box
A
Figure 1 HS8602BN
FINISH: BRUSHED NICKEL
STEP 2 - Wire Connections
A.
Wrap bare or green ground wire around green ground screw on the crossbar, no less than 2 inches from the end of the wire. Tighten the green ground screw.
B. Use standard wire connectors (not included) to make all wire connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully stuff all the connected wires into the Outlet Box.
Figure 2
White wire from outlet box
Black wire from outlet box (or Red)
White wire from fixture
Black wire from fixture
14”
5”Dia.
5.25”
Bare, or Green
Ground wire from outlet box
2018 QuoizelInc.
Crossbar x 1
C
Socket
Collar x 2
A
9.5”
4.75”
B
Backplate
Figure 3
Bulb (not supplied)
C
D
Socket
Figure 4
7.5”
E
Ground wire from Fixture
Green Ground Screw on the Crossbar
6.75”
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4
"
visit us on-line at www.quoizel.com
ReleasedDate:2019-01-17
1of1

Public link updated
The public link to your chat has been updated.
Advertisement