6 CORPORATE PARKWAY
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
Assembly Instruction Sheet #IS-NY8316B
For Style NY8316B
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Bulb Recommended: (1) Medium Base 150W Maximum
Estimated Assembly Time: 20-30 minutes
Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Package Contents
Part Description
A
B
Crossbar
Mounting Screw
C
D
Lock Washer
Hex Nut
E
F
Mounting Ball
Fixture Body
Quantity
1 pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
1 pc.
A
B
C
D
E
F
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2013 QuoizelInc.
November2013
1of5
NY8316B
FINISH: POLISHED BRASS
8 ” Dia.
1
8 ”
14 ”
8.5
”
(1)150W medium base bulb
(not Supplied)
NO.
PART NUMBER
1 9450KIT
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2 "
REPLACEMENT PART DESCRIPTION
MOUNTING HARDWARE POLISHED BRASS 4"D
2of5
REQ.
1
6 CORPORATE PARKWAY
Assembly Instruction Sheet #IS-NY8316B
For Style NY8316B
STEP 1
-
Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on the backplate of the Fixture Body (K).
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex
Nut (D) onto the Mounting Screws (B). Hand tighten until snug.
Mounting
Screw
Lock Washer
Crossbar
Hex Nut
Figure 1
Fixture
Body
STEP 2
-
Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
Mounting Hole
Crossbar
Outlet Box
Outlet Box
Screw
Figure 2
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2013 QuoizelInc.
November2013
3of5
6 CORPORATE PARKWAY
Assembly Instruction Sheet #IS-NY8316B
For Style NY8316B
STEP 3
-
Make Wire Connections
A. Use standard wire connectors to make all wire connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and carefully stuff all the connected wires into the Outlet Box.
Figure 3
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Ground wire from supply
Black wire from fixture
Ground wire from fixture
Figure 4
STEP 4
-
Attach Fixture Body to Mounting
Screw
A. Place the backplate of the Fixture Body (F) over the
Mounting Screws (B) and secure with Mounting Balls
(E). Hand tighten until snug.
Backplate
Figure 5
Mounting
Screw
Mounting Ball
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2013 QuoizelInc.
November2013
4of5
6 CORPORATE PARKWAY
Assembly Instruction Sheet #IS-NY8316B
For Style NY8316B
STEP 5
-
Install Bulb
A.
This fixture uses base . Maximum standard bulb with a medium screw
150 watts.
B. Insert bulb and screw snugly into place.
Bulb
Figure 6
Socket
STEP 6
-
Apply Silicone Sealer to Mounting
Balls
A. To prevent moisture from entering the wire compartment, apply a small amount of silicone sealer
(not included) to the threaded side of the mounting balls (E) and then install them onto the mounting screws (B). Wipe off excess caulk.
Mounting Ball
Figure 7
STEP 7
-
Apply Silicone Sealer to Backplate
A. Make sure exterior wall surface and fixture backplate are free of dirt before applying caulk. Using exterior grade caulk, start on one side of fixture backplate and follow contour, where the fixture backplate meets the exterior wall surface upward. Proceed to caulk over top of backplate and down other side. Do not caulk bottom of fixture backplate to ensure proper moisture drainage.
Your fixture is now assembled and ready to use.
Enjoy!
Exterior Wall Surface
Outdoor Fixture
Backplate
Figure 8
Exterior
Grade Caulk
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2013 QuoizelInc.
November2013
5of5
