Quoizel TRG5105OZ Trilogy 5-Light Old Bronze Chandelier Instructions
Quoizel TRG5105OZ is a stylish and functional ceiling fixture that is perfect for adding a touch of elegance to any room. With its old bronze finish and decorative filament bulbs, this fixture is sure to make a statement. The fixture is also dimmable, so you can customize the light output to create the perfect ambiance for any occasion.
Here are some of the features and benefits of the Quoizel TRG5105OZ:
- Five-light fixture with decorative filament bulbs
- Old bronze finish
- Adjustable chain length
- Dimmable
- Easy to install
The Quoizel TRG5105OZ is a versatile fixture that can be used in a variety of applications. It is perfect for use in living rooms, dining rooms, bedrooms, and hallways. The fixture can also be used in commercial settings, such as restaurants and offices.
Advertisement
Advertisement
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-TRG5105OZ
For Style TRG5105OZ
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Bulb Recommended: 5 5
Estimated Assembly Time: 30-45 minutes
Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject glass parts to any shock while in operation or shattering July result.
Package Contents
A
Fixture
Loop x 1
Spacer x 1
B
D
Shade x 5
Hardware Contents
AA
Crossbar x 1
C
Socket
Assembly x 1
E
Socket
Collar x 5
F
Bulb x 5
BB
Lock Washer x 2
CC
DD
Hex Nut x 2
Nipple x 1
D. Remove the Canopy
Lock Ring (FF) and the
Ceiling Canopy (II).
Tighten the Hex Nut (CC) against the Crossbar
(AA) to secure in place.
STEP 1
-
Install Crossbar
A.
Attach the Crossbar ( AA) to the Outlet Box with the head of the
Green Ground Screw facing you. Secure it with Outlet Box Screws
(not included) .
Tighten until snug .
AA
Green Ground
Screw
Outlet Box
AA
Outlet Box Screw
(not included)
Figure 1 Figure 2
STEP 2
-
Install Canopy Chain Loop and Nipple
* Pliers is required for this step.
A. Thread one Hex Nut (CC) to one end of the Nipple (DD) until it is at least 0.25” from the end. Pass one Lock Washer (BB) over the end of the Nipple (DD) and thread the Canopy Chain Loop (EE) onto the
Nipple (DD). By using pliers, thread the Hex Nut (CC) against the
Canopy Chain Loop (EE) and hand tighten until snug.
B. Thread another Hex Nut (CC) to the middle of the Nipple (DD). Place another Lock Washer (BB) over the Nipple (DD) and then thread the
Nipple (DD) into the Crossbar (AA) until the Nipple (DD) is about
0.375” above the Crossbar (AA).
C. Remove the Canopy Lock Ring (FF) from the Canopy Chain Loop
(EE). Place the Ceiling Canopy (II) over the Canopy Chain Loop (EE) against the ceiling to determine the correct position of the Nipple
(DD). Thread the Canopy Lock Ring onto the Canopy Chain Loop
(EE). Adjust the Nipple (DD) to allow the Ceiling Canopy (II) to rest against the ceiling when held in place by the Canopy Lock Ring (FF).
STEP 3
-
Attach Fixture Loop,
Center Stem, Socket
Assembly and Side
Arm together
A. Unfold support arms on Socket
Assembly to proper locations.
B. Place Spacer (B) over the
Nipple on the top of Socket
Assembly (C), secure by threading the Fixture Loop (A) onto the Nipple, hand tighten until sung.
Figure 3
2014 QuoizelInc.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
1of2
EE
Canopy
Chain Loop x 1
FF
Canopy Lock
Ring x 1
GG
Fixture Chain x 1
HH
II
Quick Link x 2
Ceiling Canopy x 1
C
BB
CC
DD
CC
BB
EE
FF
II
A
B
Step B
Step A
November2014
STEP 4 - Install Fixture Chain and
Ceiling Canopy
A. Adjust the Fixture Chain (GG) to your desired length by removing the links if needed.
*
Pliers is required for this step.
B. With the Fixture Chain (GG) not attached to the Fixture Loop (A) and the
Canopy Chain Loop (EE), pull the supply wires through the Fixture Chain
(GG) alternating links. After the wires are through the Fixture Chain (GG), pull the Supply Wires and the Ground
Wire through the Canopy Lock Ring
(FF) and the Ceiling Canopy (II) in order.
C. Attach one end of the Fixture Chain
(GG) to the Fixture Loop (A) with one
Quick Link (HH). Lift the fixture and
Fixture Chain (GG) up And Attach the other end of the Fixture Chain (GG) onto the Canopy Chain Loop (EE) with another Quick Link (HH). The fixture will now hang safely. Close the chain loop at the Ceiling Canopy Loop (EE).
D. Feed the Supply Wires and Ground
Wire through the Canopy Chain Loop
(EE) and Nipple (DD) into the Outlet
Box. Cut the wires leaving approximately 8” of wire extending from the Outlet Box.
E. Refer to Step 5 for wire connections.
F. Raise the Ceiling Canopy (II) and
Canopy Lock Ring (FF) up the Fixture
Chain (GG) and over the Canopy Chain
Loop (EE). Tighten the Canopy Lock
Ring (FF) onto the Canopy Chain Loop
(EE) until tight.
Suggested chain length for Ceiling height :
8’ ceiling : use 9 links of chain and 2 quick links
9’ ceiling : use 18 links of chain and 2 quick links
10’ ceiling : use 27 links of chain and 2 quick links
STEP 5 - Wire Connections
DD
Supply Wires and Ground
Wire
EE
HH
A. This fixture uses Medium
Base Decorative Filament
60W bulb (F), Maximum
100W. Insert bulb and screw snugly into place.
B. Insert bulb and screw snugly into place.
A
GG
FF
HH
Figure 4
II
A. Use standard wire connectors (not included) to make all wire connections. (Connectors are not included with fixture.) Twist connectors until wires are tightly joined together. Wrap each connection with approved electrical tape and carefully stuff all the connected wires into the Outlet Box.
White wire from supply
Black wire from supply (or Red)
Ground wire from supply
Ribbed side wire from fixture
Smooth side wire from fixture
Ground wire from fixture
Figure 5
STEP 7 -Install Bulb
Your fixture is now assembled and ready to use. Enjoy!
2
TRG5105OZ
FINISH: OLD BRONZE
1
5”Dia.
26”Dia.
Figure 7
1”
8”Dia.
5.5”
Socket
F
(
72”OVERALL HEIGHT
INCLUDES 48” CHAIN
AND 2 QUICK LINKS
)
19”
(5)Medium Base
Decorative
Filament 60W bulbs (provided),
Maximum 100W.
NOTE: FOUR LIGHTS
SHOWN FOR ILLUSTRATION
PURPOSES ONLY.
NOTE: ALL DIMENSIONS ARE ROUNDED
UP TO THE NEAREST 1/2
"
NO.
PART NUMBER REPLACEMENT PART DESCRIPTION REQ.
1
2
M2374CHOZ
G3642SH
CHAIN
SHADE
1
5
STEP 6 - Install Shade to fixture
A. Place Shades (D) over the sockets, secure by threading Socket Collar (E) onto the Socket, hand tighten until sung.
Socket
D
Figure 6
E
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2014 QuoizelInc.
2of2
November2014

Public link updated
The public link to your chat has been updated.
Advertisement