User Manual
1. Product Description 3. Charging
Avantree Hive is a Bluetooth stereo headphone with MIC from the Avantree family. It delivers
clear voice transmission and high quality sound wirelessly. And with 3.5mm audio jack, it
provides corded option for non Bluetooth-enabled phones, MP3 players, etc. The Avantree
Hive is stylish and comfortable for all-day comfortable use.
Avantree Hive uses a special 3.5mm USB charging socket.
1). First time, please charge the device for more than 4 hours to make sure the headset is fully
charged and the battery reach its full capacity.
2). Afterwards, each charge cycle may take up to 3 hours.
3). LED will indicate red in charging and off when charging is complete.
4). If you have not use the item for a few months, LED might not tum red when first charging. It
2. Product Overview
1). Multi-function button (MPB)
2). Play and Pause
3). Indicator LED
4). Power ON ГОРЕ
5). Microphone
6). Charging socket / External audio socket
7). Volume control / Track change
What's in the box -
A. Avantree Hive Headset
B. USB charging cable
C. 3.5mm audio cable
D. User manual
E. Warranty card
E
5.2 Basic Operations:
Answering a call: press MFB button once to answer the call.
might take 15-35 minutes before the LED tum red.
NOTE:
- Suggest to use Avaniree certified charger only. Or consult Avantree support if intend to use
other 3rd party charger.
« When battery power is low, the red indicator light will flash red every 3 seconds.
4. Turn On / Off
Tum On: Switch the Power ON/OFF button to ON side and the indicator LED will flash blue.
Tum Off: Switch the Power ON/OFF button to OFF side and the indicator LED will flash red.
Rs
5, Working with mobile phone (Tutorial online)
It is important to pair the headset with your Bluetooth mobile phone for the first time use.
5.1 Pairing procedure:
A. Turn on the headset.
. Press and hold the Play and Pause button for 7 seconds until LED blink blue and red
alternately.
. Search the device from your phone.
. Once found “Avantree Hive”, follow the steps and enter pin code 0000 to pair, some
phones don't need this pin code.
. Connect the headset to the device.
. Headset is ready for use now.
Once paired and connected, the headset will be automatically connected to the device
whenever you tum the headset on again, provided the device is in the range.
m
=
mm
We found most of the online technical support questions are caused by improper
pairing between the headset and the Bluetooth device. Please follow the instruction
step-by-step.
you can control it on Headset Previous / Back buttons, some system does not support.
Ending a call: press MFB button to end a call. 6.3 For Skype Call
Reject a call: press and hold the "MFB” button for 1 second to reject the call. = Some PC system can change the sound setting automatically, then you can make Skype
Voice Dial: If your mobile phone has voice dialing enabled, when in standby mode short call right now.
press the *MFB" and say the name you wish to call.
Last number redialing: In standby mode, press “MFB" button twice.
5.3 Music Streaming:
Volume Up: long press on Volume +
Volume Down: long press on Volume -
Play Music: Press “Play and Pause” button
Pause: Press "Play and Pause” button
Previous Track: Short press on Volume -
Mext Track: Short press on Volume +
Mote: Some functions are dependent on the mobile phone being used with the headset and
may not work with some phones where those features are not supported.
6. Working with PC/ Laptop (Tutorial online)
With PC running Microsoft with Built-in Bluetooth
6.1 Pairing procedure:
A. Ensure your PC with built-in Bluetooth. Turn on the Bluetooth of PC.
B. Get Hive into pairing mode.
C. Double click Bluetooth icon, click "Add a new device”.
D. Once found “Avantree Hive”, follow the steps and enter pin code 0000 to pair;
E. Connect the headset to the device.
F. Headset is ready for use now.
6.2 Streaming the Music
Before streaming the music, you need to change the sound setting first. Go to “Control
Panel” — “Sound” — Playback, change the audio setting to "Bluetooth Stereo Audio”.
Play music from your player
Pause: During music streaming, press "Play and Pause" Button, press “Play and Pause”
Button to resume it.
Volume Up: Hold on Volume +
Volume Down: Hold on Volume -
Previous / Back track: These two functions dependent an your PC system, some system,
-5-
=]
= Some PC system needs change the sound setting first, go to Skype Tools — Options-
Sound Devices, select “Audio in” / “Audio Out™ Ringing all three modes to "Bluetooth AV
Audio”, save it. Then you can make Skype call.
: Product Specification
= Bluetooth V2 1+EDR
+ Support headset profile, hands free profile, A2DP, AVRCP.
- Bluetooth Class 2, 10 meters (extended)
* Talk time: Up to 18 hours
+ Music time: Up to 18 hours
+ Standby time: up to 8 days
* Charge time: about 3 hours
* Charge Voltage: DC5.0V, 300-500mA
* Battery type: 500mA (Rechargeable Li-Polymer battery)
sp
= Weight: About 180g
= Size: 180(L) * 1700W) * 71(H) mm
Note: The music / talk and standby times may vary when used with different mobile phones or
other compatible Bluetooth devices, usage settings, usage styles and environments.
. Safety Information
* To avoid any damage or malfunction of the device do not drop device from high places.
* Keep device away form humidity, water and any other liquid. If the device is exposed to
water, moisture and other liquid, do not operate it to avoid any electrical shock, explosion
and damage to the device or yourself.
= Do not place or keep this device near any heat source, such as, direct sun light, radiators,
stoves or other apparatus which produces heat. It may cause explosion, degrade the
performance and/or reduce battery life.
= Do not modify, repair or disassemble device at discretion (Especially battery: It may cause an
explosion). Doing this will avoid the warranty.
= Do not place heavy objects on the device.
= Use only supplied and approved charger.
* Replacement or service must be done by qualified service center or manufacturer.
-8-
= Unplug this device when unused for long periods of time or during lightning storms. This product is CE certified according to the provision of the R&TTE Directive (39/5/EC).
Declares that this product is in compliance with the essential requirements and other relevant
CAUTIONS: ELECTRIC SHOCK HAZARD provisions of Directive 1999/5/EC.
The battery used in this device may present a risk of fire or chemical bum if mistreated.
9.4 Trademark Statement
9. Declaration of Conformity The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
Avantree is a trademark owned by Avantronics limited.
9.1 FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two 10. Warranty
conditions:
(1) This device may not cause harmful interference, and Please refer the warranty card included in the pack.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
9.2 RF Warning Statement
The device has been evaluated to meet general RF exposure requirement. The device can
be used in portable exposure condition without restriction. Changes or modifications not
expressiy approved by the party responsible for compliance. Could void the user's authority
t&o operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radiofrequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause hammful interference to radio or television reception, which can
be determined by tuming the equipment off and on, the user is encouraged to try to comect
the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
— Consult the dealer or an experienced radio/TV technician for help
9.3 EU
- 10 -
2. Avantree’
Simply Convenient
Bluetooth Stereo Headphone
User Guide Hive
Online Tutorial & Technical Support
For more information about this product and other Avantree Bluetooth products, including
video user guides, product tutorials and online technical support, please visit the
www.avantree.com ‘Product Tutorial’ and ‘Download’ pages.
Due to the nature of our products, there may be software updates made without notice.
Please always refer to the Avantree website for the latest information.
Dispose of the packaging and X C € ©
—
this product in accordance with
the latest provisions. QDID: B014180
Z-PKMN-BTHS849-V1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement