fi9831w user manual - Foscam.us

fi9831w user manual - Foscam.us
User Manual
Model: FI9831W
Indoor HD Pan/Tilt Wireless IP Camera
(For Windows & Mac OS)
www.foscam.us
Table of Contents
Security Warning................................................................................................................................................................... 2
1 Overviews........................................................................................................................................................................... 2
1.1 Key Features...........................................................................................................................................................3
1.2 Read Before Use....................................................................................................................................................3
1.3 Packing Contents................................................................................................................................................... 3
1.4 Physical Description.............................................................................................................................................. 3
1.5 SD Card................................................................................................................................................................... 5
2 Accessing the Network Camera......................................................................................................................................6
2.1 Access the Camera in LAN.................................................................................................................................. 6
2.2 Access the Camera in WAN...............................................................................................................................10
2.3 Using the VLC player.......................................................................................................................................... 14
2.4 IP camera connection to the server..................................................................................................................17
3 Surveillance Software GUI.............................................................................................................................................17
3.1 Login Window....................................................................................................................................................... 18
3.2 Modify the Username and Password............................................................................................................... 19
3.3 Surveillance Window........................................................................................................................................... 19
4 Advanced Camera Settings........................................................................................................................................... 26
4.1 Status..................................................................................................................................................................... 26
4.2 Basic Settings.......................................................................................................................................................29
4.3 Network..................................................................................................................................................................38
4.4 Video...................................................................................................................................................................... 49
4.5 Alarm...................................................................................................................................................................... 53
4.6 Record................................................................................................................................................................... 57
4.7 Pan/Tilt...................................................................................................................................................................59
4.8 Firewall...................................................................................................................................................................64
4.9 System................................................................................................................................................................... 64
5 Playback............................................................................................................................................................................67
6 APPENDIX........................................................................................................................................................................68
6.1 Frequently Asked Questions.............................................................................................................................. 68
6.2 Default Parameters..............................................................................................................................................74
6.3 Specifications........................................................................................................................................................74
6.4 CE & FCC..............................................................................................................................................................75
7 OBTAINING TECHNICAL SUPPORT..........................................................................................................................76
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
1
www.foscam.us
Security Warning
Safeguarding Your Privacy
Foscam cameras require good security practices to safeguard your privacy. You can help protect your camera
by changing the default username and/or password. Input a username and/or password that is at least 8 – 10
characters or longer. Try to use a combination of lower-case and upper-case letters as well as numbers and
special characters. The more complex the username and password, the harder it will be to guess by an
unauthorized user.
You should update your camera regularly at http://www.foscam.us/firmware.html. Make sure your camera has
the latest firmware installed for your specific camera model. The latest firmware for Foscam cameras utilizes
protection against various types of online hacking, cracking, and unauthorized access. Doing so will make your
device more secure, may add features, and will contain bug fixes to make your device work faster.
1 Overviews
FOSCAM FI9831W is an integrated wireless IP Camera with a color CMOS sensor enabling viewing resolution
1280*960. It combines a high quality digital video camera, with a powerful web server, to bring clear video to
your desktop from anywhere on your local network or over the Internet.
With flexible 300-degree pan and 120-degree tilt, FI9831W gives users more comprehensive control over a
monitored site. The FI9831W supports the industry-standard H.264 compression technology, drastically
reducing file sizes and conserving valuable network bandwidth.
The IPCAM is based on the TCP/IP standard. There is a WEB server inside which could support Internet
Explore. Therefore the management and maintenance of your device is simplified by using the network to
achieve the remote configuration and start-up.
The camera is designed for indoor surveillance applications such as retail stores, offices or banks. Controlling
the IPCAM and managing images are simplified by using the provided web interface across the network
utilizing wireless connectivity.
FOSCAM provides Smart Phone APP for Android and iPhone users, please search and install Foscam Viewer
on App Store and Google Play for iOS and Android devices, then you can view your camera anywhere,
anytime on your smart mobile devices.
Please note to change your default username and password once you have initially logged into your
Foscam camera. Changing your default user settings enables better protection against any types of
attacks against your camera.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
1.1 Key Features



















Standard H.264 video compression algorithm to satisfy the transmission of high definition video in narrow
bandwidth network
1.3 Mega Pixel
Pan 300 degree, tilt 120 degree
Supports IE/Firefox/Google/Safari browser or any other standard browsers
Supports WEP,WPA and WPA2 Encryption
Wi-Fi compliant with wireless standards IEEE 802.11b/g/n
IR night vision (Range:8m)
Supports image snapshot
Supports dual-stream
Supports SD Card to 32G
Supports IR-Cut and the filter change automatically
Embedded FOSCAM DDNS(dynamic domain name service) Service
Supports two-way audio / remote viewing & record from anywhere anytime
Multi-level users management with password protection
Motion detection alert via email or upload image to FTP
Supporting Third Party Domain Name Service
Providing Phone APPs for Android and iPhone users
Supports multiple network protocols: HTTP /TCP /IP /UDP /FTP /DHCP /DDNS / UPNP/ONVIF
Providing Central Management Software to manage or monitor multi-cameras
1.2 Read Before Use
Please first verify that all contents received are complete according to the Package Contents listed below.
Before the Network Camera is installed, please carefully read and follow the instructions in the Quick
Installation Guide to avoid damage due to faulty assembly and installation. This also ensures the product is
used properly as intended.
1.3 Packing Contents
● IP Camera × 1
● DC Power Adapter × 1
● Wi-Fi Antenna × 1
● Mounting bracket × 1
● Ethernet Cable × 1
● CD×1
● Quick Installation Guide × 1
● Security Warning Card × 1
1.4 Physical Description
Front Panel
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 1.1
1.Speaker: Built-in speaker
2.LENS: Fixed focus lens
3.Infrared LED: Infrared LEDs for night vision
4.Microphone: Built-in microphone
5.WI-FI Antenna: Wireless Antenna
Rear Panel
9.Antenna
1.LAN
8.Audio Input
2.Power
3.Network light
7.Audio Output
6. SD Card Slot
4.Power 5.WPS
Figure 1.3
1.LAN: 10/100 Mbps RJ-45 port for wired connection
2.Power: DC 5V/2A Power supply
3.Network Light: The LED will blink slowly in wired connection, blink two times faster in wireless connection
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
4.Power Light: If the power supply works fine, the light will turn on
5.WPS: Push the WPS button on the camera and wireless router in 1 minutes, the camera will connect the
wireless router automatically, in WPS process, the Network Light will blink very fast
6. SD card Slot: Supports up to 32GB SD card for storing the video
7.Audio Output: This jack is used to plug an external speaker
8.Audio Input: This jack is used to plug an external microphone
9.Antenna: Used to connect external wireless antenna
Bottom View
1.Mounting Port
2.Reset Button
3.Product Label
5.SN Label
4.WI-FI Module Label
Figure 1.4
1.Mounting Port: Port for mounting bracket
2.Reset Button: Push and hold for more than 5 seconds to set the camera to factory default
3.Product Label: There are MAC address, UID, DDNS URL, default username and password on the label
4.WI-FI Module Label: There is WI-FI MAC address and serial number of the WI-FI module on the label
5.SN Label: There is serial number of the camera on the label
6 The different features between the models involved
1.5 SD Card
This camera supports SD Card and the max size of SD card must be under 32G.
When you plug in the SD card during the camera work process, please reboot the camera again, or else the
SD Card may be cannot work well.
Go to the SettingsDevice StatusDevice Status page, you can see the SD card status.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
The default storage path of alarm record files is SD card, when the available size of SD card is less than 256M,
the old record files will be deleted automatically.
2 Accessing the Network Camera
This chapter explains how to access the network camera through web browsers and RTSP players.
2.1 Access the Camera in LAN
This camera support HTTP and HTTPS protocols, so here will allow you to use HTTP and HTTPS port no.
(1) Http:// LAN IP + Http Port NO.
Double click the IP Camera Tool icon and it should find the camera’s IP address automatically after you plug in
the network cable.
Figure 2.1
Double click the IP address of the camera; your default browser will open to the camera login page.
Https:// LAN IP + Https Port no.
The default Https port no. is 443. You can use the url to access the camera: https:// LAN IP + HTTPS port.
Go to Settings - Network - Port panel , you can see and change the https port NO.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 2.2
HTTPS(Hypertext Transfer Protocol over Secure Socket Layer) is a safe way to access your camera, the data
transferred on the Internet will be encrypted. Since we can not apply license for every LAN or DDNS URL, the
webpage may pop up a warning like the following picture, you just need to click “Continue to this website (not
recommended).”
Open Internet Explorer if it is not already opened. Click on Tools, then click Internet Options.
Next, click the Security tab, then click the Trusted sites button.Finally ,click the Confirm button.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 2.3
For Firefox, you can add the trusted as the following way:
Tools --- Options ---- Advanced --- View Certificates --- Servers
Figure 2.4
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Click View Certificates, and go to Servers option.
Figure 2.5
Go to Add Exception panel.
Figure 2.6
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
2.2 Access the Camera in WAN
2.2.1 Static IP Addresses
Users who have static IP addresses do not need to set DDNS service settings for remote access. When you
have finished connecting the camera using the LAN IP address and port forwarding, you can access the
camera directly from the Internet using the WAN IP address and port number.
How to Obtain the WAN IP address from a public website
To obtain your WAN IP address, enter the following URL in your browser: http://www.whatismyip.com.The
webpage at this address will show you the current WAN IP.
Figure 2.7
Access your IP Camera from the Internet
You can access the IP Camera from the Internet (remote access). Enter the WAN IP address and port number
in your standard browser. For example, you would enter http:// 183.37.28.254:85
Note
Make sure port forwarding is successful. You can do port forwarding two ways.
Login to your router to enable the “UPNP” function. You can then login to the camera as administrator, choose
Network, and then choose UPnP to enable UPnP. Make sure that the status of UPnP reads “UPnP Successful”
on the Device Status page.
Do port (HTTP port and Media port) forwarding manually. (See Figure 2.11 for further details)
If your router has a Virtual Server, it can do port forwarding. Add the camera’s LAN IP and port which you had
set earlier to your router’s port forwarding settings.
Note: If you plug the camera into a router, it will have a dynamic IP address and you need to set DDNS service
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
settings to view it remotely.
2.2.2 Dynamic IP Addresses
DDNS is a service that allows your IP Camera, especially when assigned with a dynamic IP address, to have a
fixed host and domain name. This means that even though your WAN IP address is constantly changing, you
will have a fixed hostname you can use to access your cameras at all times. You can access the camera
directly from the Internet using the hostname and port number.
What is the HTTP Port NO.?
Default HTTP Port is 88
All cameras have the default HTTP port of 88. For example, if the LAN IP link of the camera is
http://192.168.8.102:88, this means that the camera’s HTTP port is 88. You can change port 88 to another port
if you’d like such as 2000 or 8090, which will not be conflict with other existing ports like 25, 21,10000.Here you
can set the port no. between 1 and 65535.
Change the default http no.88 to another one.
How to assign a different HTTP Port No. and fixed the LAN IP of the camera by the IP Camera Tool?
Step 1: Open the IP Camera Tool, select the camera you would like to change the port of, right click on the IP
address, and click on ”Network Configuration”, this brings up the network configuration box as shown in Figure
2.8 and 2.9.
Figure 2.8
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 2.9
Step 2: Enter the username and password of the Administrator (default username is admin with a blank
password), and click “OK” to apply changes.
Step 3: Wait around 10 seconds, you’ll see that the camera’s LAN IP address has changed. In our example it
was changed to 2000, so we see http://192.168.8.102:2000 in IP Camera Tool. Also, the LAN IP address is
now fixed at a static IP address of http://192.168.8.102:2000. This IP address will not change even if the
camera is powered off and back on, the camera will remain on this LAN IP address. This is very important that
a static LAN IP address is set, or you may have problems later with remote access and seeing the camera
remotely if the camera loses power and reconnects on a different LAN IP address. Make sure you set a static
LAN IP address!
Figure 2.10
What is Port forwarding?
If you have never done port forwarding before, you can open and view the following link to understand the
basic concept. Port forwarding allows for outside connections to access a specific device on your network from
anywhere in the world. Every router automatically blocks any incoming connections for safety purposes. Using
port forwarding, you are telling your router to allow a connection through a certain port (you can think of it as a
gateway) into your router. You set this port to a specific device, in our case an IP Camera, so it can be
accessed from anywhere in the world.
Click this link to learn more about port forwarding: http://portforward.com/help/portforwarding.htm
How do we configure Port Forwarding?
For this section, we will be using an example:
Let’s say the camera’s LAN IP address is http://192.168.8.100:2000
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Step 1: Login to the router, and go to your router’s port forwarding or port triggering menu. Sometimes this is
also under the name of Virtual Server or NAT.
Using the Linksys brand router as an example, we would log into the router, and go to the Applications &
Gaming menu. We would then click on the “Single Port Forwarding” sub-menu.
Step 2: Create a new column using the LAN IP address & HTTP Port of the camera within the router as shown
below, then push OK or Submit to save your settings:
Figure 2.11
First method :
Use the embedded DDNS to access the camera via the Internet
Each Foscam camera has an embedded unique DDNS domain name, the format of this domain name is
xxxxxx.myfoscam.org. On the bottom of the camera, you can see the domain name sticker with this
information on it.
For example, we can use test09.myfoscam.org. In the camera, click Settings at the top, click “Network” on the
left, then click “DDNS” to get to the DDNS settings page. Here you can see the unique domain name of your
camera.
Figure 2.12
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Now you can use “http://Domain name + HTTP Port” to access the camera via the Internet.
Take hostname test09.myfoscam.org and HTTP Port of 2000 for example, the URL link to access the camera
via the Internet would be http:// test09.myfoscam.org:2000.
Second method :
Use the Third party DDNS to access the camera via the Internet
Step 1 Please go to the third party DDNS website(such as www.no-ip.com) to create a free hostname.
Step 2 DO DDNS Service Settings within the Camera
Please set DDNS Settings within the camera by hostname, a user name and password you’ve got from
www.no-ip.com
Take hostname ycxgwp.no-ip.info, user name foscam, password foscam2012 for example.
Firstly, goes to option of DDNS Settings on the administrator panel.
Secondly, select No-Ip as a server.
Thirdly, fill foscam as DDNS user, fill password foscam2012 as DDNS password, fill ycxgwp.no-ip.info as
DDNS domain and server URL, Then click save to make effect. The camera will restart and to take the DDNS
settings effective.
Fourthly, after the restart, login the camera, and go to option of Device Status on the administrator panel, and
check if the DDNS status is successful.
If failed, please double check if you have input the correct hostname, user name, and password, and try to
redo the settings.
Note
If you have set Third Party DDNS successfully ,the Foscam Domain Name will be invalid. The Third Party
DDNS and the Foscam Domain Name cannot work at the same time, the last time you configured will take
effect.
2.3 Using the VLC player
This camera supports RTSP streaming, here you can view the camera using VLC player.
RTSP URL
rtsp:// [user name][:password]@IP:HTTP port number/videosream
The part in the square brackets may be omitted.
user name & password:
The user name and password to access the camera. This part can be omitted.
IP:
WAN or LAN IP address.
Videostream:
Here support three mode: videoMain, videoSub and audio. When the network speed is bad, here you had better
select videoSub. If you select audio, you can only hear the sound but cannot see the video.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
For example:
IP: 192.168.1.11
HTTP Port number: 88
User name: admin
Password: 123
Here I can enter one of the following URLs in the VLC.
1) rtsp://admin:123@192.168.1.11:88/videoMain
2) rtsp:// @192.168.1.11:88/videoMain
3) rtsp://:123@192.168.1.11:88/videoMain
4) rtsp://admin@192.168.1.11:88/videoMain
Open the VLC, and go to MediaOpen Network Stream option, then enter the URL into VLC.
Figure 2.13
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 2.14
Sometimes you may need to enter the user name and password again. Click OK and you can see the real-time
preview.
Figure 2.15
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 2.16
If you cannot play the video in the VLC player, please check the port mapping. You can read Quick Installation
Guide about How to configure port forwarding.
NOTE:
If you modify the camera’s username or password, you had better reboot the camera, or else the
new username and password cannot take effect when you enter the authentication in the VLC.
2.4 IP camera connection to the server
Device supports ONVIF 2.2.1 protocol,You can easily access the NVR with ONVIF or server with ONVIF.
3 Surveillance Software GUI
Please refer to the Quick Installation Guide if you install the camera at first time. After finishing quick
installation, you can take time to learn the operation of the software.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
3.1 Login Window
1
2
3
4
Figure 3.1
Please check the login window above, it was divided to 5 sections from no. 1 to 5.
Section1 Enter the User name and password
The default administrator username is admin with a blank password, please reset the password at first using
and prevent unauthorized users login the camera (read chapter 3.2.4 about how to change).
Section2
Stream
The camera supports two stream modes: Main stream and sub stream. If you want to access the camera form
LAN, here you can select Main stream. If you want to access the camera from Internet, here we recommend
sub stream.
Note: When the network bandwidth is badly you’d better select Sub Stream and the video will be more fluency.
Section3
Select the language
You can select the language you need via click on the language dropdown list to switch.
Section4 Login the camera
Click Login button and you will see the surveillance windows.(If login the camera for the first time, the page that
modify the username and password will appears.)
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
3.2 Modify the Username and Password
When you log in for the first time, it will come to the operating of modify the username and password
automatically.
Figure 3.2
Enter the New Username, New password and Confirm the password.
Click Modify button, you will see the login page again.
3.3 Surveillance Window
1
2
8
3
4
5
6
7
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
9
2
www.foscam.us
Figure 3.6
Section 1
FOSCAM Logo/ LiveVideo / Settings/Playback buttons
: FOSCAM LOGO
: Path to surveillance window. Click this button and back to the surveillance window
:
Path to Administrator Control Panel, Click it, and it will lead to Administrator Control Panel and
do advanced settings.
: Click this button and back to the Playback panel to view the stored audio files stored in the
SD Card.
Section 2
Multi-Device Window
The firmware inside the camera supports up to maximum of 9 cameras being monitoring at the same time. You
can add other cameras in multi-device setting (read chapter 4.2.5).
Figure 3.7
Section 3
Mode/ Stream / Mirror/ Flip buttons
Mode
1) 50HZ ---------Indoor surveillance (Region: Europe, China)
2) 60HZ ---------Indoor surveillance (Region: USA, Canada)
3) Outdoor------Outdoor surveillance
Stream
The default Stream supports four modes: 0/720P/30fps/4M, 1/VGA/25fps/2M, 2/VGA/ 15fps/ 1M and 3/
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
VGA/10fps/200K. The format of the stream type is Stream type no. / Resolution / Maximum frame rate/
Bit rate.
1) Stream type no. : The number is used to identify the stream type.
2) 720P/ VGA
There are two resolutions, the bigger one is 720P, and the smaller one (VGA) is 640x480 pixels. The bigger the
resolution is , the better of the image quality is. If you are accessing the camera via internet and want to get
more fluent video streaming, please select resolution VGA.
3) Maximum frame rate
When the video format is 50Hz, the maximum frame rate is 25 fps. When the video format is 60Hz, the
maximum frame rate is 30 fps. You should lower frame rate when the bandwidth is limited. Normally, when the
frame rate above 15, you can achieve fluently video.
4) Bit rate
Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should
combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate is large, that will
lead to video can not play well.
You can reset the stream type on “Settings-> Video-> Video Settings” panel.
Figure 3.8
After changing, please re-login the camera and you can see the modification.
Section 4
Pan/Tilt Control
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
1------Up control button
2------Down control button
3------Left control button,
4------Right control button,
5----- Up-Left control button
6----- Up-Right control button
7----- Down-Left control button
8----- Down-Right control button
Click this button and go to center
Section 5
Cruise / Preset settings
Cruise Settings
The default cruise tracks have two types: Vertical and Horizontal.
Vertical: The camera will rotate from up to down.
Horizontal: The camera will rotate from left to right.
: Start cruise.
: Stop cruise.
If you want to define or change the cruise trace, please go to Settings
PTZ
Preset Settings panel.
How to do cruise?
Firstly: Select one track in the track dropdown list
Select one of these.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Secondly: Click Start cruise button, the camera will cruise following the predefined path.
Thirdly: Click stop button and finish cruising.
Preset settings
IPCAM supports 16 preset positions, which is considered enough for DIY home & small business surveillance
market
The default preset position is Topmost, Bottom most, Left most, right most, you can add other preset positions.
Add
Click this icon to save the position you need the camera to remember
Delete
GO
Select one preset position and click this button to delete it.
Select one preset position in the preset dropdown list and click Go to make the camera move the
preset position
How to do preset position?
Firstly, move the camera and stop at a desired place where you want make preset position.
Secondly, click
button and enter a descriptive name for the preset position. The preset position cannot
contain special characters. Then click OK to save it. If you want to reset the preset position, click Cancel.
After that, you can move the camera and stop at another place, and set another preset position. You can do all
the 16 preset positions with this method.
If you want to see one preset position you have set, only select the preset position name from the preset
dropdown list, and click go
Section 6
button, the camera will go to the preset position.
IR LED Lights
Click Infra led and there are two modes to adjust the infrared led: Auto and Manual.
Auto: Select it and the camera will adjust the infra led (on or off) automatically.
Manual: Select it and you can turn on or turn off the infra led manually.
Schedule: Select it and the IR led light will be off at the schedule period. If you want to define or change the IR
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
led lights schedule time, please go to Settings
Section 7
Video
IR LED Schedule page.
Image quality settings
In this page, you can tune Hue, Brightness, Contrast, Saturation, and Sharpness to get higher quality.
Section 9
OSD
If you have added time and camera name in the video, you can see it in the live window.
Go to Settings ---Basic settings---Camera name panel, and you can change another device name. The
default device name is anonymous.
Go to Settings ---Basic settings---Camera time panel and adjust the device time.
Go to Settings ---Video---On Screen Display panel, you can add or no add OSD.
Section 10
Play/Stop/ Talk/Audio/ Snap/ Record/ Full screen button
1
2
3
4
5
6
7
1------Play Click it to play the video of the camera
2------Stop Click it to stop the video of the camera
3------ Talk
Click the button and the icon will become to
, then talk to the microphone that connected
with PC, people around the camera can here your voice. Click the icon again and stop talking.
4------ Audio Click this icon, the icon will become to
you can hear the sound around the camera by the
earphone or speakers that connected with PC.
5----- Snapshot Click it to make snapshot and it pop-up a window which picture you snapshot, right click in
the window and save the picture to anywhere you want.
6----- Record Click the icon
and the camera start recording, you can see a green dot in the live
window. Click again and stop recording. The default storage path is C:\IPCamRecord. You can change the
storage path: Go to Settings- >Record->Storage Location panel.
7------Full Screen Click it to make full-screen, or you can double click the surveillance screen to make
full-screen. Double click again and exit full-screen.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Onscreen Mouse Control
Right click the mouse and you can adjust the screen ration, full screen and Zoom up.
Figure 3.9
Keep ration: Select it and the camera will adjust the size of live window based on the the computer monitor
automatically. Sometimes there is a black border around the video, please select Keep ration to get a better
visual quality .
Full Screen: Select it and Click it to make full-screen, press ESC and exit full-screen.
Zoom up: Select it and you can see a bigger screen than before.
First Method: Here is a convenient and fast solution to Zoom up/down screen by Clicking Video Screen and
adjusting Mouse pulley, or by pressing the CTRL key and clicking the mouse left button.
Second Method: Click it and the live view will be digital zoomed up, then click Zoom Down and the live view
back to original size.
Figure 3.10
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
When you select the Full Screen, then click right mouse, there is a Screen PTZ button.
Figure 3.11
Click the Screen PTZ button and put the mouse on the screen to indicate the camera move direction you
prefer, press the left mouse, the camera will move to the corresponding direction. Loosen the mouse and stop
moving. Press Esc button or double click right mouse and cancel the function.
NOTE: For Mac OS, the plugin cannot support Onscreen Mouse Control, so you cannot allow to use it.
4 Advanced Camera Settings
Click the button “Settings”, goes to Administrator Control Panel to make advanced camera settings.
4.1 Status
Device Status contains four columns: Device Information, Device Status, Session Status and Log, it will show
you various information about your camera.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
4.1.1 Device Information
Figure 4.1
Camera Model: The camera model NO.
Camera Name: The Device Name is a unique name that you can give to your device to help you identify it.
Click Basic Settings and go to Camera name panel where you can change your camera name. The default
device name is anonymous.
Camera ID: Display the wired MAC address of your camera. For example Device ID is 000C5D00008, the
same MAC ID sticker is found at the bottom of the camera.
Camera Time: The system time of the device. Click Basic Settings and go to Camera time panel and adjust
the time.
System Firmware version: Display the System Firmware version of your camera.
App Firmware version: Display the application firmware version of your camera.
Web version: Display the web UI version of your camera
Plug-in version: Display the plug-in version of your camera
4.1.2 Device Status
On this page you can see device status such as Alarm status/ Record Status ,DDNS status ,WIFI status and so
on.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.2
4.1.3 Session status
Session status will display who and which IP is visiting the camera now.
Figure 4.3
4.1.4 Log
The log record shows who and which IP address accessed or logout the camera.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.4
Reboot the camera and clear the log records.
4.2 Basic Settings
This section allows you to configure your camera’s Name, Time, Mail, User account and Multi-Device.
4.2.1 Camera Name
Default alias is anonymous. You can define a name for your camera here such as apple. Click Save to save
your changes. The alias name can’t contain special characters.
Figure 4.5
4.2.2 Camera Time
This section allows you to configure the settings of the internal system clocks for your camera.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.6
Time Zone: Select the time zone for your region from the dropdown menu.
Sync with NTP server: Network Time Protocol will synchronize your camera with an Internet time server.
Choose the one that is closest to your camera.
Sync with PC: Select this option to synchronize the date and time of the Network Camera with your computer.
Manually: The administrator can enter the date and time manually. Note select the date and time format.
use DST: Select the daylight saving time from the dropdown list.
Click Save button and submit your settings.
4.2.3 User Accounts
Here you can create users and set privilege, visitor, operator or administrator. The default user account is
admin, with a blank password. You can enter the users accounts of visitor 、 operator and administrator
Manually.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.7
How to change the password?
Firstly, select the account which you want to change the password, then select “Change password”, enter the
old password and the new password, lastly click modify to take effect..
Figure 4.8
How to add account ?
Select one blank column, then enter the new user name, password and privilege, last click Add to take effect.
You can see the new added account on the Account list.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.9
Figure 4.10
Delete :Select the account which you want to delete, then click Delete button to take effect.
NOTE: The default admin account cannot be deleted, but you can add other administrator users.
How to change the username ?
Firstly, select the account which you want to change the username, then select “Change username”, enter the
new password, lastly click modify to take effect.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.11
4.2.4 Multi-Camera
If you want to view multi-surveillance screens on one window, you need to login one camera, and set it as the
main device, and do Multi-Device Settings, add other cameras to the first one camera. Before you do
multi-cams settings, you need to assign different port such as 81, 82, 83, 84, 85, 86, 87, 88 to the cameras if
there is 8 cams installed.
The firmware within the camera can support a maximum of 9 devices monitoring all at the same time. This
page you can both add FOSCAM MJPEG and H.264 series cameras to the first camera and view
multi-surveillance screen on one window.
Add cameras in LAN
In Multi-Device Settings page, you can see all devices searched in LAN. The 1st Device is the default one. You
can add more cameras in the list in LAN for monitoring. The camera’s software supports up to 9 IP Cameras
online simultaneously. Click The 2nd Device and click the item in the Device List in LAN, the Alias, Host and
Http Port will be filled in the boxes below automatically. Enter the correct username and password then click
Add. Add more cameras in the same way.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.12
Camera Model: Our Company produces two series cameras: MJPEG and H.264. Here will show you which
series the camera belongs to.
Figure 4.13
Back to Surveillance Windows, and click Four Windows option, you will see four cameras you added.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.14
Figure 4.15
Add cameras in WAN
If you want to view all cameras via the internet(remote computer), you will need to add them using DDNS
domain name. Firstly, make sure all of the cameras you added can be accessed through the internet. (Read
How to configure DDNS settings in chapter 4.3.4)
Login to the first camera using a DDNS domain name and port.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.16
Click Multi-Device Settings. Choose The 2nd Device. Fill in the 2nd camera’s name, DDNS domain name,
port number. Enter user name and password and then choose Add. (Figure 4.17)
Figure 4.17
1----- The camera model: MJ or H264.
2----- The 2nd camera’s name
3----- Fill in the 2nd camera’s DDNS host not LAN IP
NOTE: The MJ series have the same HTTP Port NO. and Media Port NO.
4 ---- Enter the 2nd camera’s user name and password
5---- Click Add button and to take effect
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
NOTE: Here the Host must be entered as the second camera’s DDNS domain name, not its LAN IP.
Figure 4.18
Return to video window. You will see all of the cameras accessible through the internet.
When you are away from home, you can use the first camera’s DDNS domain name and port to view all the
cameras via internet.
Figure 4.19
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
4.3 Network
This section will allow you to configure your camera’s IP, PPPoE, DDNS, Wireless Settings, UPnP and Port.
4.3.1 IP Configuration
If you want to set a static IP for the camera, please go to IP Configuration page. Keep the camera in the same
subnet of your router or computer.
Figure 4.20
Changing settings here is the same as using the IP Camera Tool. (Figure 4.21/4.22)
It is recommended that you use the subnet mask, gateway and DNS server from your locally attached PC. If
you don’t know the subnet mask, gateway and DNS server, you can check your computer’s local area
connection as follows:
Control Panel  Network Connections Local Area Connections Choose Support  Details.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.21
Set the same Subnet Mask and
gateway of the camera with your
PC .
There are two DNS servers . You
can set any of them . Same with
gateway is also OK .
Figure 4.22
If you don’t know the DNS server, you can use the same settings as the Default Gateway.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
4.3.2 Wireless Settings
Step 1: Choose “Settings” on the top of the camera interface, and go to the “Network” panel on the left side
of the screen, then click “Wireless Settings.”
Click the Scan button and the camera will detect all wireless networks around the area. It should also display
your router in the list (Figure 4.23).
Click the Scan button
to search for wireless
networks.
Click the Page number to see other wireless
networks devices if there are more than 10.
Figure 4.23
Step 2: Click the SSID (name of your router) in the list, the corresponding information related to your network,
such as the name and the encryption, will be filled into the relevant fields automatically.
You will only need to fill in the password of your network. Make sure that the SSID, Encryption and the
password you filled in are exactly the same for your router.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
2 Enter the password
of your router.
1 Click the SSID of your router
and the relevant information
will be filled in the fields
automatically.
Figure 4.24
Step 3: Please click on the Save button after all settings have been entered and disconnect the network cable.
Never shut down the power of the camera until the IP camera is able to connect to the wireless network.
The LAN IP address will disappear on the window of IP Camera Tool when the camera is configuring a wireless
connection. Wait about 1 minute, the camera should obtain a wireless connection, and the LAN IP of the
camera will show again on the window of the IP Camera Tool. The IP address may have changed after the
camera receives a wireless connection; we recommend setting a static local IP address if this IP address
changes by right clicking the camera in IP Camera Tools, setting a static IP, and pushing OK.
Congratulations! You have set up the wireless connection of the camera successfully.
NOTE :
If you fail to make a wireless connection, please refer to your seller or contact us directly for
assistance.
4.3.3 PPPoE
If you are using a PPPoE connection, enable it and enter the User Name and Password for your PPPoE
account.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.25
4.3.4 DDNS
FOSCAM camera has embedded a unique DDNS domain name when producing, and you can directly use the
domain name, you can also use the third party domain name.
FOSCAM domain name
Here take test09.myfoscam.org for example. Go to option of DDNS on the Settings->Network panel, you
can see the domain name.
Figure 4.26
Now you can use http:// Domain name + HTTP Port to access the camera via internet.
Take hostname test09.myfoscam.org and HTTP Port no. 800 for example, the accessing link of the camera
via internet would be http:// test09.myfoscam.org:800
Restore DDNS to factory: If you have configured Third Party DDNS successfully, but you want to use
Manufacturer’s DDNS again , here click this button and start Manufacturer’s DDNS Service.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Third Party Domain Name Settings
User can also use third part DDNS, such as www.no-ip.com. ,www. 3322.com
Here take www.no-ip.com for example:
① Step 1, Go to the website www.no-ip.com to create a free hostname
Firstly: Login on www.no-ip.com and click No-IP Free to register.
Figure 4.27
Figure 4.28
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Please register an account step by step according to instructions on www.no-ip.com
After registration, please login your email which used to register. You will receive an email from website, please
click the link to activate your ACCOUNT as indicated in email.
Secondly: Login the link with the registered username and password to create your domain name.
Figure 4.29
Figure 4.30
Please create the domain name step by step according to instructions on www.no-ip.com
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Step 2, DO DDNS Service Settings within the Camera
Please set DDNS Settings within the camera by hostname, a user name and password you’ve got from
www.no-ip.com
Take hostname ycxgwp.no-ip.info, user name foscam, password foscam2012 for example.
Firstly, goes to option of DDNS Settings on the administrator panel.
Secondly, select No-Ip as a server..
Thirdly, fill foscam as DDNS user, fill password foscam2012 as DDNS password, fill ycxgwp.no-ip.info as
DDNS domain and server URL, Then click save to make effect. The camera will restart and to take the DDNS
settings effective.
Fourthly, after the restart, login the camera, and go to option of Device Status on the administrator panel, and
check if the DDNS status is successful.
If failed, please double check if you have input the correct hostname, user name, and password, and
try to redo the settings.
NOTE :
If you have set Third Party DDNS successfully ,the Foscam Domain Name will be invalid. The Third Party
DDNS and the Foscam Domain Name cannot work at the same time, the last time you configured will take
effect.
② Do port forwarding within the router
Example: The camera’s LAN IP address is http://192.168.8.100:2000 , Media port no. is 9200.
Firstly, login the router, goes to the menu of Port Forwarding or Port Trigger (or named Virtue Server on
some brands of router). Take Linksys brand router as an example, Login the router, and goes to
Applications & Gaming->Single Port Forwarding.
Secondly, Create a new column by LAN IP address & HTTP Port No. of the camera within the router showed
as below.
Assign a name
as you like here .
Fill the Media Port no. of the
camera on the column of
External Port and Internal Port .
Figure 4.31
③ Use domain name to access the camera via internet
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
After the port forwarding is finished, you can use the domain name+ http no.to access the camera via internet.
Take hostname ycxgwp.no-ip.info and http no. 2000 for example, the accessing link of the camera via
internet would be http:// ycxgwp.no-ip.info:2000
4.3.5 UPnP
Figure 4.32
The default UPnP status is closed. You can enable UPnP, then the camera’s software will be configured for
port forwarding. Back to the “Device Status” panel, you can see the UPnP status:
Figure 4.33
The camera’s software will be configured for port forwarding. There may be issues with your routers security
settings, and sometimes may error. We recommend you configure port forwarding manually on your router .
4.3.6 Port
This camera supports HTTP Port. HTTP Port is used to access the camera remotely. If you want to access the
camera and view the video, the HTTP Port must both be configured correctly.
HTTP port: By default, the HTTP is set to 88. Also, they can be assigned with another port number between 1
and 65535. But make sure they can not be conflict with other existing ports like 25, 21.
Figure 4.34
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
4.3.7 Mail Settings
If you want the camera to send emails when motion has been detected, here Mail will need to be configured.
Figure 4.35
1----- SMTP Server/ Port /Transport Layer Security Enter SMTP server for sender. SMTP port is usually
set as 25. Some SMTP servers have their own port, such as 587 or 465, and Transport Layer Security usually
is None. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be
set to 465 or 25 or 587, which port you choose should be decided by which Transport Layer Security you
select.
2-----SMTP Username/ password ID account and password of the sender email address
3----- Sender E-mail Mailbox for sender must support SMTP
4----- Receiver Mailbox for receiver need not support SMTP,you can set 4 receivers
5----Save Click Save to take effect
6----Test Click Test to see if Mail has been successfully configured.
Click Test to see if Mail has been successfully configured.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.36
If the test success, you can see the Success behind the Test, at the same time the receivers will receive a test
mail.
If the test fails with one of the following errors after clicking Test, verify that the information you entered is
correct and again select Test .
1) Cannot connect to the server
2) Network Error. Please try later
3) Server Error
4) Incorrect user or password
5) The sender is denied by the server. Maybe the server need to authenticate the user, please check it and try
again
6) The receiver is denied by the server. Maybe because of the anti-spam privacy of the server
7) The message is denied by the server. Maybe because of the anti-spam privacy of the server
8) The server does not support the authentication mode used by the device
4.3.8 FTP Settings
If you want to upload record files and images to your FTP server,you can set FTP Settings.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.37
Figure 4.38
FTP server: If your FTP server is located on the LAN, you can set as Figure 4.37.
If you have an FTP server which you can access on the internet, you can set as Figure 4.38.
Port: Default is port 21. If changed, external FTP client program must change the server connection port
accordingly.
FTP Mode: Here supports two modes: PORT and PASV.
Username/password: The FTP account and password.
Click Save to take effect.
Click Test to see if FTP has been successfully configured.
4.4 Video
This section allows you to configure Video stream settings, On screen display and Snapshot settings.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
4.4.1 Video Settings
There are two ways to set the stream video settings. They are main stream video settings and sub stream
video settings.
Figure 4.39
Stream type: There are four types to identify different streams you have set.
Resolution: The camera supports two types: 720P, VGA. The higher the resolution is, the clearer video will
become. But the code flux will become larger too, and it will take up more bandwidth.
Bit rate: Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate
configuration should combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate
is large, that will lead to video can not play well.
Frame rate: Note that a larger frame size takes up more bandwidth. When the video format is 50Hz, the
maximum frame rate is 25 fps. When the video format is 60Hz, the maximum frame rate is 30 fps. You should
lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can achieve
fluently video.
Key Frame Interval: The time between last key frame and next key frame. The shorter the duration, the more
likely you will get a better video quality, but at the cost of higher network bandwidth consumption.
4.4.2 On Screen Display
This page is used to add time stamp and device name on the video.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.40
Display Timestamp: There are two options: Yes or NO. Select Yes and you can see the system date on the
video,
Display Camera Name: There are two options: Yes or NO. Select Yes and you can see the device name on
the video.
4.4.3 Privacy Zone
This page is used to set some mask as privacy zone on the video.
Figure 4.41
Allow On Screen Display Mask: There are two options: Yes or NO. Select yes and draw a mask area on the
video, the mask area will be black on the video.
The mask area.
Figure 4.42
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Click OK button and return to the OSD page, click Save to take effect.
Back to the surveillance window, you can see the mask area as the following picture:
Figure 4.43
4.4.4 Snapshot Settings
On this page you can set the snapshot pictures’ image quality and the storage path.
Figure 4.44
Image Quality: Low, Middle and High. The higher the quality, the picture will be clearer.
Save Path: FTP. If you have done FTP and Alarm settings, when alarming, the camera will snap pictures to the
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
FTP automatically.
Enable timing to capture
To enable capture interval, follow the steps below:
1 Select Enable Motion detection
2 Capture interval:The interval time between two captures.
3 Select the capture time
 Capture anytime
Click the black button up the MON, you will see all time range turn red. When something moving in the
detection area at anytime, the camera will capture.
 Specify an capture schedule
Click the week day words, the corresponding column will be selected. For example, click TUE, the all
column of TUE turns to red, that means during Tuesday whole day, the camera will capture.
 Press the left mouse and drag it on the time boxes, you can select the serial area.
4.4.5 IR LED Schedule
On this page you can set the schedule time for switching IR LED lights. When parameter Mode is set to the
Schedule on the Live Video window, At these schedule time, the IR LED lights will be turned off.
Figure 4.45
4.5 Alarm
IP Camera supports Motion Detection Alarm, when the motion has been detected, it will send emails or
upload images to FTP.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
7
1
2
3
4
5
6
Figure 4.46
Step 01: Enable Motion detection
Step 02: Sensitivity---- It supports three modes: Low, Middle and High. The higher the sensitivity, the camera
will be more easily alarmed. Select one motion sensitivity.
Step 03: Trigger interval--- The interval time between two motion detections. Here supports
5s/6s/7s/8s/9s/10s/11s/12s/13s/14s/15s. Select one interval time.
Step 04: Select the alarm indicator
When the motion has been detected, the alarm status will turn to Detect alarm.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.47
There are four alarm indicators:
A Ring
There is an embedded speaker inside the camera, so if you select Ring, when the motion has been detected,
the people around the camera will hear beep alarm sound.
B Send E-mail
If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail
Settings first. The alarm email cannot contain the alarm picture if you have not selected Take Snapshot.
C Take Snapshot
If you select this checkbox, when the motion has been detected, the camera will snap the live view window as
a still picture and load it to the FTP. Make sure you have set FTP and set FTP as the storage path in
Video->Snapshot settings panel.
If you select Send Email, at the same time the picture will be send to you as an attachment.
Capture interval: The interval time between two pictures.
D Record
If you select this checkbox, when the motion has been detected, the camera will record automatically and store
the record files to the SD Card. Make sure the camera has inserted SD card and you have set the SD card as
the Alarm record files storage path, please go to Record—> Storage location page to verify this settings.
The default alarm record time is 30s and pre-alarm record time is 5s, please go to Record—> Alarm Record
page and change the alarm time settings.
Step 05: Set detection area
Click set detect area and it pop up a window, then you can draw the detection area. Click Back button after
settings. When something moving in the detection area, the camera will alarm.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.48
Step 06: Alarm Schedule
① Alarm anytime when motion is detected
Click the black button up the MON, you will see all time range turn red. When something moving in the
detection area at anytime, the camera will alarm.
Click this button and select all time range
Figure 4.49
② Specify an alarm schedule
Click the week day words, the corresponding column will be selected. For example, click TUE, the all column
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
of TUE turns to red, that means during Tuesday whole day, when something moving in the detection area, the
camera will alarm.
Figure 4.50
③ Press the left mouse and drag it on the time boxes, you can select the serial area,
Figure 4.51
Step 07: Click Save button to take effect.
When the motion has been detected during the detection time in the detection area, the camera will alarm and
adopt the corresponding alarm indicators.
NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and
anytime.
4.6 Record
This section will allow you to change the record files storage path and the record time.
4.6.1 Storage Location
On this page you can change the alarm and manually recording storage path..
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.52
Alarm Recording Location : SD card or FTP. Make sure the camera has been inserted the SD card. On
this page, you can see the available space of the SD card.
Manual Recording Location: For Windows OS, the manual recording path is C:/ IPCamRecord, you can
change another one. For MAC OS, the manual recording path is: / IPCamRecord.
4.6.2 Alarm Record
Figure 4.53
4.6.3 Local Alarm Record
This page you can change the Local Alarm Record Time.
Figure 4.54
Select the Enable Alarm Record. Set the Local Alarm Record Time. Click Save button to take effect.
4.6.4 Record Schedule
On the page you can configure the schedule record.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.55
You can select the main stream or sub stream from the dropdown.
You can set the store path of the recording file on the Storage Location page.
Click Save button to take effect.
4.6.5 SD Card Management
This page you can check the SD card information.
Figure 4.56
4.7 Pan/Tilt
This page will allow you to change the pan/tilt speed and do cruise tracks settings.
4.7.1 Pan & Tilt Speed
There are five Pt speed types: very fast, fast, normal, slow and very slowly. Select the desired PTZ speed type
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
and click save button .
Figure 4.57
4.7.2 Cruise Settings
This section explains how to add/ delete/ alter one cruise track.
Figure 4.58
Setting the Cruise Mode
There are two cruise mode: Cruise time and Cruise Loops.
Cruise time: Select Cruise time from Cruise Mode dropdown, then you can set the Cruise time of the
camera.
Cruise Loops:Select Cruise Loops from Cruise Mode dropdown, you can set the Cruise Loops of the
camera.
Click Save to take effect.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.59
Manage the Cruise Track
There are two default cruise tracks: Vertical and Horizontal.
Vertical: The camera will rotate from up to down
Horizontal: The camera will rotate form left to right.
Add: Add one cruise track, then click save button.
Delete: Select one cruise track and delete it.
Save: After you modify the Dwell time, you should click Save button to take effect.
Example
How to do add cruise tracks ?
Firstly, Click Add button and enter a descriptive name to identify the cruise track.
Secondly: On the lower left of the page, you can see all preset points you have added. Select one preset point
and click Add button, you can see the preset point has been added to the cruise track on the cruise track page.
You need to add two or more preset points to the cruise track.
The new added track name .
1 Select one preset point.
2 Click Add button .
Here you can see the preset point
has been added to one track. And
you can set the stay time.
Figure 4.60
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Thirdly: Click OK button and the cruise track will take effect.
You can add other cruise track as the same method.
For example: I have added three preset points to the “track 1”, that means : When I select the “track 1” on the
surveillance window, the camera moves as the following track: upright then Right Most last downleft.
You can add preset on the left of the surveillance window.
Add the preset.
The cruise tracks have added to
the “track 1” .
Figure 4.61
After add the cruise track, back to the surveillance window, click Cruise, her you can see all cruise tracks you
have added.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.62
There are other buttons between the Preset points and Cruise track, you can use these buttons to adjust the
order of preset points or add/delete one preset points in one cruise track. And you can set the Dwell time of the
preset point.
Figure 4.63
Add: Select one preset points and add it to the selected cruise track.
Delete: Select one preset points you have added to one cruise track, click delete.
Move up/ down: Select one cruise track, adjust the order of preset points in one cruise track.
Attention: Considering the life time and thermal issue of the motor, it’s not recommend to do long-time cruise.
4.7.3 Start-Up Options
Here section will allow you to set the stop position after the camera reboots.
It supports three modes: No self test, Goto home position and Goto preset point.
No self test: When rebooting, the camera will not pan / tilt.
Goto home position: When rebooting, the camera will pa Providing Central Management Software to
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
manage or monitor multi-cameras n / tilt and stops at center.
Goto Preset point: Select one preset position and save it. When rebooting, the camera will pan/ tilt and stops
at the preset position you have set.
Figure 4.64
4.8 Firewall
This section explains how to control the access permission by checking the client PC’s IP addresses. It is
composed of the following columns: Block access from these IP addresses and Only allow access from
these IP addresses.
Figure 4.65
Enable firewall, If you select Only allow access from these IP addresses and fill in 8 IP addresses at most, only
those clients whose IP addresses listed in the Only allow access from these IP addresses can access the
Network Camera. If you select Block access from these IP addresses, only those clients whose IP
addresses are in the IP list cannot access the Network Camera.
Click Save to take effect.
4.9 System
In this panel, you can backup/restore your camera settings, upgrade the firmware to the latest version, restore
the camera to default settings and reboot the device.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
4.9.1 Back-up & Restore
Click Backup to save all the parameters you have set. These parameters will be stored in a bin file for future
use.
Click Browse and select the parameters file you have stored, then click Submit to restore the restore the
parameters.
Figure 4.66
4.9.2 System Upgrade
Your current firmware version will be displayed on your screen. You may go to the Status  Device
Information Page to check for the latest firmware versions available.
Click Browse, choose the correct bin file and then click System upgrade. Make sure you have unplugged the
SD card.
Don’t shut down the power during upgrade. After upgrading, you can see the upgrade result.
Figure 4.67
Upgrade Firmware by IP Camera Tool
Double click the IP Camera Tool shot icon
, select the Camera IP that you want to upgrade the
firmware. Then select Upgrade Firmware and enter the username and password, choose the firmware file, and
upgrade.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 4.68
Figure 4.69
CAUTION: If your camera works well with the current firmware, we recommend not upgrading. Please don’t
upgrade the firmware unnecessarily. Your camera may be damaged if misconfigured during an upgrade.
NOTE:
Before upgrade the firmware, please unplug the SD card and reboot the camera, don’t upgrade the firmware in
WAN through the web UI, or else the upgrade process may be failed.
Please ensure you have download the correct firmware package for your camera before upgrading. Read the
upgrade documentation (readme.txt file) in the upgrade package before you upgrade.
Upon downloading the firmware check the sizes of the
bin files. They must match the size in the readme.txt
file. If not, please download the firmware again until the sizes are the same. Your camera will not function
correctly if a corrupt .bin file is used.
Normally, only Device WEB UI need to be upgrade, please do not try to upgrade the Device System Firmware.
1) Never shut down the power of the camera during upgrade until the IP camera restart and get connected.
2) After upgrade successfully, please uninstall the old plugin and re-install it, then reset the camera to the
default factory settings before using the camera.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
4.9.3 Factory Reset
Click All reset and all parameters will return to factory settings if selected. This is similar to press the Reset
button on the bottom of the camera.
Figure 4.70
4.9.4 Reboot
Click Reboot System to reboot the camera. This is similar to unplugging the power to the camera.
Figure 4.71
5 Playback
On this page you can view the record files stored in the SD card.
1
2
3
Section 1
Define the Record files time and Type
: The storage path of record files
: Here supports three types: current day, current month and All records. Another way,
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
select the time on the time&date manually.
: The type of records files, Here supports two typs: Normal record, Alarm record and
All records.
: Click this button to search all record files satisfy the conditions you selected.
Section 2
Search record files
On this panel you can see all record files satisfy the conditions you set.
Section 3
Play/Stop/Audio/Full screen buttons
Please select one record file before use these buttons.
Click this button to play the record files
Click this button to stop the record files
Open or stop audio
Click this button to make full screen, and double click left mouse to exit full screen.
6 APPENDIX
6.1 Frequently Asked Questions
NOTE: Any questions you would meet, please check Network connections firstly. Check the working status
revealed by the indicators on the network server, hub, exchange and network card. If abnormal, check the
network connections.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
6.1.1 How to download and installl the ActiveX for Firefox users
For the first time login the camera, it may prompt you to download plugin.
Click here to download
the plugin.
Figure 6.1
Drag the download file to Firefox web page and it will prompt you to Install it.
Click Install Now.
Figure 6.2
Reboot the Firefox after the plugin installation is successfully completely, then relogin the camera again, you
can see the surveillance window
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
NOTE: If you could not view living video after running the ActiveX, only a red cross
in the center of the
video or just a black screen. Please change another port number to try.
Make sure all firewall or antivirus software on your computer does not block the active download and
installation. If you are unable to run the ActiveX control, try shutting down the firewall or antivirus program.
6.1.2 How to download and install the ActiveX for Google Chrome users ?
For the first time login the camera, it will prompt you to download the ActiveX..
Figure 6.3
Download the plugin and drag it to the Extensions page of Google Chrome.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Go to Extensions page.
Figure 6.4
Click Add button to install the Plugins.
Click Add button to install
the plugin.
Figure 6.5
Reboot the browser and relogin the camera, you will see the surveillance window.
6.1.3 I have forgotten the administrator password
To reset the administrator username and password, press and hold down the RESET BUTTON for 5 seconds.
Upon releasing the reset button, wait for 20 seconds, the camera will reboot and the username and password
will return to the factory default administrator username and password. Please power on the camera before
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
reset
Default administrator username: admin
Default administrator password: No password
6.1.4 Camera can not record when I click Record button or I can’t change the
manually record path
When you use Windows7 or Vista, you may be not able to do manually record or change the record path
because of the security settings of computer.
There are two ways to resolve this problem:
Please add the camera as a trusted site to resolve this issue. The steps are :
IE browserToolInternet PropertiesSecurityTrusted sitesSitesAdd
Open IE browser, then right click, select “Run as administrator”
6.1.5 Subnet doesn’t match
Check whether your ipcamera in the same subnet of your computer. The step is Control Panel  Network
ConnectionsDbclick Local Area Connections  Choose GeneralProperties.Check subnet mask, IP
address and gateways. When you set IP address please make sure they are in the same subnet. Otherwise
you can't access camera.
6.1.6 No Pictures Problems
The video streaming is transmitted by the ActiveX controller. If ActiveX controller isn’t installed correctly you will
see no video image. You can resolve this problem by this way:
Download ActiveX controller and set the safety property of IE in the PC when you view it first time: IE
browser  Tool  Internet Proper  Security  Custom Level  ActiveX control and Plug-ins. Three options of
front should be set to be “Enable”, The ActiveX programs read by the computer will be stored. As follows:
Enable: Download unsigned ActiveX controls
Enable: Initialize and script ActiveX controls not marked as safe
Enable: Run ActiveX controls and plug-ins
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Figure 6.6
If you allow the ActiveX running, but still could not see living video. Please change another port number to try.
Don’t use port 88.
Figure 6.7
NOTE: Make sure that your firewall or anti-virus software does not block the camera or ActiveX. If you could
not see video, please shut down firewall or anti-virus software to try again.
6.1.7 Can’t access IP camera in internet
There are some reasons:
1、ActiveX controller is not installed correctly
2 、 The port which camera used is blocked by Firewall or Anti-virus software. Please change another port
number and try again.
3、Port forwarding is not successful
Check these settings and make sure they are correct.
6.1.8 UPnP always failed
UPnP only contains port forwarding in our recent software. Sometimes, it may be failed to do port forwarding
automatically because of firewall or anti-virus software. It also has much relation with router’s security settings.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
So we recommend you do port forwarding manually. You can view your camera in internet successfully after
you do port forwarding manually in your router (Figure 4.30).
6.1.9 Camera can not connect wireless
If your camera could not connect wireless after you set wireless settings and plug out the cable. Please check
whether your settings are correct or not.
Normally, camera can’t connect wireless mainly because of wrong settings.
Make sure broadcast your SSID; use the same encryption for router and camera.
6.1.10 Can’t see other cameras listed in multi-device when using remote
access
If you want to view all the cameras via the WAN, verify that each camera added in the multi-device settings can
be accessed by using the DDNS name and port number. Use the DDNS domain name not the camera’s LAN
IP. (For more details see: How to add cameras in WAN)
6.2 Default Parameters
Default network Parameters
IP address: obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically
DDNS: Embedded FOSCAM domain name
Username and password
Default admin username: admin with a blank password
6.3 Specifications
ITEMS
Image
Sensor
Video
FI9831W
Image Sensor
1/3"Color CMOS Sensor
Display Resolution
1280*960 Pixels
Lens
f: 2.8mm, F:2.4
Mini. Illumination
0Lux
View angle
80 degrees
Image Compression
H.264
Resolution
960p(1280*960),VGA(640*480)
View
H.264 dual streaming
Image adjust
The brightness, contrast, saturation , is adjustable
Infrared mode
Automatic , manual (on/off)
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
Network
Power
Alarm
Hardware
Interface
Environment
Light Frequency
50Hz, 60Hz
Night visibility
Φ5mm 11 IR LEDs, Night visibility up to 8 meters
Pan/Tilt Angle
Horizontal:300° & Vertical: 120°
Ethernet
One 10/100Mbps RJ-45
Supported Protocol
TCP/IP、UDP/IP、HTTP、SMTP、FTP、DHCP、DDNS、UPNP、
ONVIF
Wireless Standard
WIFI(IEEE802.11b/g/n)
Support IP address
static IP address, dynamic IP address
Power Supply
DC 5V/2.0A (EU,US,AU adapter or other types optional)
Power Consumption
8Watts (Max.)
Alarm detection
The motion detecting, detection threshold Settings
Alarm inform
Support Email、FTP etc alarm inform way
SD CARD
SD CARD (Support to 32G)
Audio Input/Output
One audio input jack, One audio output jack.
Reset Buttons
One Reset
Ethernet
One 10/100Mbps RJ-45
Wireless Interface
WIFI antenna
Operate Temper.
0° ~ 55°C
Operating
10% ~ 80% non-condensing
Humidity
(32°F ~ 131°F)
Storage Temper.
-10°C ~ 60° (14°F ~ 140°F)
Storage Humidity
0% ~ 90% non-condensing
Dimension
117(L) x114(W) x129mm(H)
Gross Weight
814g(Color Box Size:245 x 145 x 165mm)
Net Weight
348g
CPU
2.0GHZ or above
Memory Size
256MB or above
Display Card
64M or above
Supported OS
Microsoft Windows 2000/XP/Vista/Windows7-32bit/Windows764bit/Windows8- 32 bit/ Windows8-64bit/ mac
Browser
IE6 and above version or compatible browser, Firefox or other
standard browsers
Software
Upgrade
Upgrade from network
Certification
CE,FCC
Warranty
Limited 1-year warranty
Physical
PC Requirements
Attention: Power adapter should be used between 0℃-40℃, and 5%-90% relative humidity.
6.4 CE & FCC
Electromagnetic Compatibility (EMC)
FCC Statement
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
www.foscam.us
This device compiles with FCC Rules Part 15. Operation is subject to the following two conditions.
 This device may not cause harmful interference, and
 This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the installation
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is like to cause harmful interference, in which case the user will be required to correct the interference at
his own expense.
FCC Caution
Any changes or modification not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case
the user may be required to take adequate measures.
7 OBTAINING TECHNICAL SUPPORT
While we hope your experience with the IPCAM network camera is enjoyable and easy to use, you may
experience some issues or have questions that this User’s Guide has not answered.
Please contact support via e-mail at support@foscam.us. You can also reach technical support at
1-800-930-0949 by following the automated instructions.
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising