Dell UP3218KA electronics accessory Specifications

Statement of Volatility – Dell UP3218KA

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

The Dell UP3218KA contains both volatile and non-volatile (NV) components. Volatile components lose their data immediately after power is removed from the component. Non-volatile (NV) components continue to retain their data even after power is removed from the component. The following NV components are present on the Dell UP3218KA system board.

Table 1. List of Non-Volatile Components on System Board

Description

Reference

Designator

Volatility Description

User

Accessible for external data

Remedial Action (Action necessary to prevent erasure of data)

Serial Flash

ROM

MX25L1283

5FM

U301 Non-volatile Flash memory, 128 M bit. To store firmware.

No Part place on Interface

Board, it has hardware/software write protected.

EEPROM

M24512

U302

DDR4 SDRAM U802/U80

3/U804/U8

K4A4G165

WE

05/U901/U

902

Serial Flash

ROM

MX25L1606

U1903

Non-volatile memory,

512 k bit. To store DP

EDID, HDCP and user adjust data.

Volatile memory 1Gbit

(256 Mb x 16). To store video data stream and firmware code.

Non-volatile Flash memory,

16M bit. To store USB3.0 firmware.

No

No

No

Part place on Interface

Board, it has hardware/software write protected.

Part place on Interface

Board.

Part place on Interface

Board, it has hardware/software write protected.

CAUTION: All other components on the system board lose data if power is removed from the system. Primary power loss

(unplugging the power cord) destroys all user data.

Copyright © 2022 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.

December 2022