Sony DAV-TZ140 DVD Home Theater System Owner's Manual
PDF
Download
Document
Advertisement
Advertisement
SONY. 4-299-353-12(1) DVD Home Theatre system Operating Instructions Homi ©2012 Sony Corporation Printed in China WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. The main plug is used to disconnect this device from the AC outlet, so position this device in a location where it can be easily unplugged. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fire or the like. The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. Indoor use only. CAUTION The use of optical instruments with this product will increase eye hazard. This system incorporates with Dolby* Digital and Dolby Pro Logic adaptive matrix surround decoders. * Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. This system incorporates High-Definition Multimedia Interface (HDMI) technology. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. “PlayStation” and “PS3” are registered trademarks of Sony Computer Entertainment Inc. “BRAVIA” is a trademark of Sony Corporation. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft. ABOUT MPEG-4 VISUAL: THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND Connecting the Speakers NONCOMMERCIAL USE OF A CONSUMER FOR DECODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”) THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE http://www. mpegla.com/ All other trademarks are trademarks of their respective owners. LE DVD” may be used as a general term for a DVD VIDEO, DVD+RW/DVD+R, and DVD-RW/DVD-R. The system enters standby mode automatically. When the system is in pause, stop, open, or no disc mode, the system will enter standby mode automatically after 30 minutes. Caution Playable Discs DVD DVD-VIDEO DVD-ROM DVD-R/DVD-RW DVD+R/DVD+RW CD CD-DA (Music CD) CD-ROM CD-R/CD-RW VIDEO CD Super VCD À CD or DVD will not play if it has not been correctly finalized. For more information, refer to the operating instructions supplied with the recording device. Discs that cannot be played * Blu-ray Discs ® HD DVDs ® DVD-RAMs ® DVD Audio discs ® PHOTO CDs * Super Audio CDs ® Data track of CD-Extras ® Audio material side on DualDiscs ® DVD-R/DVD-RW/DVD+R/DVD+RW in VR (Video Recording) mode + CPRM (Content Protection for Recordable Media) -compatible DVD-R/RW containing content flagged as “Copy once” Notes on discs This product is designed to playback discs that conform to the Compact Disc (CD) standard. DualDiscs and some music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard. Therefore, these discs may not be compatible with this product. Connecting your TV This appliance is classified as a CLASS 1 LASER PRODUCT CLASS 1 LUOKAN 1 LASERLAITE LASER product. KLASS 1 LASERAPPARAT This marking is located on the rear exterior. Notice for customers: The following information is only applicable to equipment sold in countries applying EU directives. The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. This equipment has been tested and found to comply with the limits set out in the EMC Directive using a connection cable shorter than 3 meters. (European models only) Owner's Record The model and serial numbers are located on the rear exterior of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. DAV-TZ140 Serial No. The following FCC statement applies only to the version of this model manufactured for sale in the USA. Other versions may not comply with FCC technical regulations. Note on playback operations of a DVD Some playback operations of a DVD may be intentionally restricted by software producers. Since this system plays a DVD according to the disc contents the software producers designed, some playback features may not be available. Note about double-layer DVDs The playback picture and sound may be momentarily interrupted when the layers switch. Region code (DVD VIDEO only) Your system has a region code printed on the rear of the unit and will only play a DVD VIDEO (playback only) labeled with an identical region code or ; Note about Multi Session CD You can play only the first session of a multisession disc. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/ TV technician for help. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Playable Types of Files Video File format Extensions MPEGA Video” “mp4,” “máv” Xvid Video” “avi” Music File format Extensions MP3 (MPEG1 Audio “mp3” Layer 3)” WMA” “wma” ААС 5 “m4a” Photo File format Extensions JPEG “jpg? “jpeg” “pe” 1) AVC is not compatible. ) Unavailable on US models. 3) MP3PRO format is not compatible. ) WMA DRM, WMA Lossless or WMA PRO format are not compatible. 5) AAC DRM and AAC Lossless formats are not supported. Note e Some files may not play depending on the format, the encoding, or recording condition. e Some USB devices may not work with this system. e The system supports ISO 9660 Level 1/ Level 2, or Joliet in DATA CD. e The system supports UDF (Universal Disk Format) in DATA DVD. e The system supports FAT12, FAT16, and FAT32 in USB device. e The system can recognize the following files or folders in DATA DVD, DATA CD and USB device: — up to 300 folders — up to 648 files Depending on the jacks on your TV or set-top box, select the video and audio connection method. Do not use any speakers other than those supplied with this system. Insert the speaker cords to match the color of the SPEAKERS terminals of the unit. г” e Rear panel о the main unit Speaker cord wm. Contact area (+) e | Covering „= Colored tube FRONT LEFT: White FRONT RIGHT: Red CENTER: Green SURROUND LEFT: Blue SURROUND RIGHT: Gray SUBWOOFER: Purple Note e Connect the speaker cord with the colored tube to +. \, SUBWOOFER Color System Setup Parts and Controls When connecting to a TV only The TV has AUDIO OUT jacks*4: Connecting a video cord and an audio cord When connecting a TV and set-top box/PlayStation®3 The TV has AUDIO OUT jacks: Audio ls 4 Set-top box/ Video PS3 Select *1 or *2 for the video connection based on the jacks on the TV. Audio ==". Video um. VIDEO IN НОМ IN AUDIO OUT L R 1 Connect the AC power cord (mains lead). 2 Turn on the power of the main unit and TV. 3 Press FUNCTION repeatedly or DVD/ | CD to switch the function to DVD/CD. HO (on/ standby) | Playback starts automatically if a disc Turms on the unit, or sets it to standby mode. with an auto playback function is loaded. Press № twice to stop playback. Play operation buttons 2 (open/close) 4 Switch the input selector on your TV Opens or closes the disc tray. to display “Home Theatre System.” 5 P SETUP i d dus ress in stop mode. Starts or re-starts playback (resume play). The Setup Menu appears. Ш (stop) 6 Press ¢/> repeatedly to select [Preference Page], then press (+). 7 Press T/*+ repeatedly to select [TV Type], then press ©. 8 Press Nv repeatedly to select [PAL] or [NTSC] from the displayed list, then press (>. 9 Press SETUP to turn off the Setup Stops playback and remembers the stop point (resume point). The resume point for a title/track is the last point you played. FUNCTION Selects the playback source. VOLUME -/+ Adjusts the system’s volume. Y (USB) port Used for connecting a USB device. Disc tray Front panel display [ (remote sensor) Menu. Note * The display on the TV screen may be interrupted momentarily after changing the color system as described above. [1 ¡SPEAKERS terminals HDMI OUT jack [3 VIDEO OUT jack 13 [4 TV/CABLE (AUDIO IN) jacks [5 FM ANTENNA jack AUDIO OUT Lo R VIDEO IN HDMI IN © E + TV FONE-TOUCH INPUT | PLAY ТУМО CJ) Co DE МО O a > = > op < 3 9 № > a E Recio o 53 7 8 REPEA? SURROUND: del = uw PROGRAM SLEEP sam DVD D ТОР MENU MENU MUTING +8 a = m SETUP CODISPLAY TIME PRESET— PRESET+ SONY SHIFT Press and hold this button to use buttons with purple text labels. TV INPUT* Switches the TV's input source between the TV signal and other input sources. I The TV does not have AUDIO OUT jacks: Video Set-top box/ PS3" | VIDEO IN HDMI IN €) E) | 1. |_| BRAVIA Sync ONE-TOUCH PLAY Activates One-Touch Play. Tv (on/standby)* Turns on the TV or sets it to standby mode. 1/4) (on/standby) Turns on the system or sets it to standby mode. Function selection buttons Select the playback source. DVD/CD FM USB TV/CABLE FUNCTION Selects the functions in sequence. REPEAT Activates repeat/shuffle playback mode. SURROUND Selects surround audio output mode. EQ Selects equalizer mode. AUDIO Selects the audio format/track and EM mode. SUBTITLE Selects the subtitle language when multilingual subtitles are available. ANGLE Switches to other viewing angles when multi- angles are recorded on a DVD VIDEO. Number buttons Enter the title/chapter numbers, preset radio stations, etc. PROGRAM Activates program play and presets radio stations. SLEEP Sets the sleep timer. DVD TOP MENU Opens the DVD's Top Menu. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. À polarized plug has two blades with one wider than the other. À grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. VAE um” 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. ® It may take time to read files in the following cases: — there are many folders or files. — the memory capacity of the USB device that you are using is very large. — the memory of the USB device that you are using is fragmented. * Supplied only in certain areas. This is the basic connection via video cord (yellow). *2 Supplied only in certain areas. Picture quality will be improved compared to a video cord. *3 Sold separately. To listen to TV audio via the system, connect with an audio cord (red and white). *4 If your TV does not have AUDIO OUT jacks, TV sound does not output via this system. Note * Find a location and an orientation that provide good reception, and then set up the antenna. e Set up the antenna away from the AC power cord (mains lead), other cables, and metal objects such as windows. 11 9 +DVD MENU Opens or closes the DVD's menu. MUTING Turns off the sound temporarily. €JPIV/? Moves the highlight to a displayed item. @ (ENTER) Enters the selected item. VOLUME +/- Adjusts the volume. SETUP Opens or closes the setup menu. (5 DISPLAY Opens or closes the Display Menu. TIME Switches time information during playback. Playback operation buttons Ft (PPI (previous/next) bp (fast reverse/fast forward) ИЛ» (slow) Activates slow reverse/slow forward when <4 (PP is pressed in pause mode. ИЕ (pause) № (play) Ш (stop) Radio operation buttons PRESET +/- TUNING +/- * Works with Sony TVs only. Depending on your TV, you may not be able to use some of the buttons. Note AUDIO IN This button does not work. 15 This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. AN This symbol is intended to alert the user to the presence of important A operating and maintenance (servicing) instructions in the literature accompanying the appliance. BE Be symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Applicable accessories: Remote Control. Unpacking Europe Only Disposal of waste batteries {applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Checking the supplied items e Main unit (1) e Speakers (5) ® Remote commander (remote) (1) ео Е ЗЕ ЗЕ So © ® FM wire antenna (aerial) (1) ® R6 (size AA) batteries* (2) e Operating Instructions (this manual) * US. models only. ** High Speed HDMI cable and video cord are included only in certain areas. Insert two R6 (size AA) batteries by matching the ® and © ends on the batteries to the markings inside the compartment. When Installing the 2 Fasten the screws to the wall, then hang the speaker on the wall. Speakers on a Wall Caution e Contact a screw shop or installer for information regarding the wail material or screws to be used. Use screws that are suitable for the wall material and strength. As a plaster board wail is especially fragile, attach the screws securely to a beam. Install the speakers on a vertical and flat wall where reinforcement is applied. Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. 1 Prepare screws (not supplied) that are suitable for the hole on the back of each speaker. See the illustrations below. 4 mm (3/16 inch) ke 30 mm (1 3/16 inches) Hole on the back of the speaker 5 mm (7/32 inch) TL 10 mm (13/32 inch) Depth of fastened screw 72 7 to 9 mm (9/32 to 3/8 inch) Continued =. Playing Files on a Disc/USB Device Playing a Disc 1 Press DVD/CD. You can also select this function by pressing FUNCTION repeatedly. 2 Press 4 to open the disc tray. 1 Press DVD/CD or USB. ® DVD/CD: For a disc. ® USB: For a USB device. You can also select the function by 3 Place а disc on the tray, then press 2. pressing FUNCTION repeatedly. 2 Load the source. Fora disc Place a disc on the tray by pressing £ to open/close the disc tray. For aUSB device Connect a USB device to the Y (USB) port. With the label side up. 4 Press № to start playback. 5 Press VOLUME +/- to adjust the volume. 3 Press t/+ to select a folder, then press (+) and select a file. 4 Press B to start playback. 5 Press VOLUME +/- to adjust the volume. Note e Do not remove the USB device during operation. To avoid data corruption or damage to the USB device, turn the system off when connecting or removing the USB device. To cancel the sleep timer function Press and hold SHIFT, then press SLEEP repeatedly until “OFF” appears in the front panel display. Convenient Functions Control for HDMI function by connecting it to the system via an HDMI cable. You can check the playing time and remaining time of the current title, chapter, Available features ® One-Touch Play or track. With one touch of ONE-TOUCH PLAY on Press and hold SHIFT, then press TIME the remote control, the system and your repeatedly. TV automatically turn on and the TV's input is switched to the system; playback of a disc starts automatically. Each time you press and hold SHIFT, then press TIME while playing the disc, the displayed item changes depending on the e System Power Off disc. When you turn the TV off by using the VO button on the TV's remote control or TV 1/0) on the systems remote control, the system turns off automatically. ® System Audio Control You can switch the audio output to either the TV speakers or this system's speakers via the TV's menu. You can set the system to turn off at a preset time, so you can fall asleep listening to music. Press and hold SHIFT, then press SLEEP. Each time you press this button, the minute display (the remaining time) changes by 10 minutes. A countdown of the last 20 seconds until the unit turns off appears in the front panel display. To check the remaining time Press and hold SHIFT and SLEEP for 3 seconds. The remaining time until the unit turns off appears in the front panel display. 21 . . . . Precautions On cleaning discs, disc/lens cleaners e Do not use cleaning discs or disc/lens On placement cleaners (including wet or spray types). ® At high volume, over long periods of time, These may cause the apparatus to the cabinet becomes hot to the touch. This malfunction. is not a malfunction. However, touching On your TV's color the cabinet should be avoided. Do not place the system in a confined space where IMPORTANT NOTICE | ventilation is poor as this may cause Caution: This system is capable of holding overheating. a still video image or on-screen display * Do not install the system near heat sources Image on Four television screen such as radiators or air ducts, or in a place indefinitely. [f you leave the still video subject to direct sunlight, excessive dust, Image OF On-screen display Image mechanical vibration, or shock. displayed on your TV for an extended ® Do not install the system in an inclined period of time you risk permanent position. It is designed to be operated ina damage to your television screen. horizontal position only. Projection televisions are especially ® Do not place heavy objects on the system. susceptible to this. On operation | On moving the system e If the system is brought directly from a cold Before moving the system, make sure that to a warm location, or is placed in a very there is no disc inserted, and remove the AC damp room, moisture may condense on the power cord (mains lead) from the wall outlet lenses inside the unit. Should this occur, (mains). the system may not operate properly. In . . _ ) р pepe’) On handling discs this case, remove the disc and leave the . | . | - - e To keep the disc clean, handle the disc by system turned on for about half an hour - . its edge. Do not touch the surface. until the moisture evaporates. ; ee: e Do not stick paper or tape on the disc. * If anything falls into the cabinet, unplug ; ; ce e Do not expose the disc to direct sunlight or the unit and have it checked by qualified ersonnel before operating it any further heat sources such as hot air ducts, or leave a a a . + + + + + P р 5 ) it in a car parked in direct sunlight as the On cleaning temperature may rise considerably inside ® Clean the cabinet, panel, and controls with the car a soft cloth slightly moistened with a mild . . On cleaning discs detergent solution. Do not use any type of . on u: e Before playing, clean the disc with a abrasive pad, scouring powder, or solvent cleaning cloth. such as alcohol or benzine. re oe ; Wipe the disc from the center out. If you have any questions or problems ; | | e Do not use solvents such as benzine, concerning your system, please consult your nearest Sony dealer thinner, commercially available cleaners, or a № а + . . . . . anti-static spray intended for vinyl LPs. 25 CD/DVD System Laser Diode Properties Specifications Emission Duration: Continuous Laser Output*: Less than 44.6 uW This output is the value measurement at a AUDIO POWER SPECIFICATIONS for the U.S. models POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) Front L + Front R E distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. USB Section Y (USB) port: Maximum current: With 8 ohms loads, both channels driven, from 180 - 20,000 Hz; rated 30 watts per channel minimum RMS power, with no more than 1% total 500 mA Tuner Section System harmenic distortion from 250 milli watts to rated output. PLL quartz-locked digital synthesizer Tuning range North American and Brazilian models: 87.5 MHz - 108.0 MHz Amplifier Section POWER OUTPUT (rated): Front L + Front R 30 W + 30 W (at (100 kHz step) 8 ohms, 1 kHz, 1% Other models: 87.5 MHz - 108.0 MHz THD) (50 kHz step) POWER OUTPUT (reference): Antenna EM lead antenna Front L/Front R/ Center/Surround L/ Video Section Surround R: 50 W (per Outputs VIDEO: Pin jack dh. . HDMI OUT: HDMI channel at 8 ohms, 19-9; I kHz) Subwoofer: apm 50 W (at 8 ohms, Speakers 100 Hz) Front Inputs SS-T5121 TV/CABLE: Pin jack Dimensions (approx.) 83 mm x 119 mm x 100 mm (3 3/s in x 4/4 in x 4 in) (w/h/d) incl. projecting parts Mass (approx.) 0.35 kg (13 02) 29 Other Playback Operations Ш When playing a DVD/VCD Press ANGLE during playback to select the desired angle. (This applies to DVD VIDEOs only.) Press ( DISPLAY during play. The Display Menu appears on the TV screen. 2 Press №/\ to select an option, then press (+). 3 Press and hold SHIFT, then press the number buttons to jump to the desired option. Ш When playing a CD 1 Press ( DISPLAY during play. The selection display appears on the TV screen. Press and hold SHIFT, then press the number buttons to select the desired track. Press SUBTITLE during playback to select the desired subtitle language. (This applies to DVD VIDEOs only.) Press AUDIO repeatedly during playback to select the desired audio signal. — When the system is playing a DVD VIDEO recorded in multiple audio formats (PCM, Dolby Digital, or MPEG audio), you can change the audio format. If the DVD VIDEO is recorded with Ш When playing a video/music/photo file Press (5 DISPLAY during play. The selection display appears on the TV multilingual tracks, you can also change the language. 1 — With a VIDEO CD or CD, you can select the sound from the right or left channel screen. and listen to the sound of the selected 2 Press and hold SHIFT, then press the channel through both the right and left number buttons to select the desired speakers. number. Select the tracks to play in the order you want When you start playing a VIDEO CD with (only for CDs). PBC (Playback control) functions, the menu 1 for your selection appears. Press and hold SHIFT, then press PROGRAM. The Program Menu display appears on the TV screen. To play without using PBC In stop mode, press and hold SHIFT, then press the number buttons to select the track 2 Press and hold SHIFT, then press the number you want. number buttons to select the desired track. 3 Press +/1/V to select [Start] to play the program. Using the Setup Displ ay [4:3 Letter Box]: Displays a wide picture with —— black bands on the top and bottom. You can make various adjustments to items such as picture and sound. Displayed items vary depending on the country model. The default setting is underlined. 1 Press DVD/CD, then eject the disc. 2 Press SETUP. The setup menu appears. [4:3 Pan Scan]: Displays a full-height picture on the entire screen, with trimmed sides. 3 Press €/> to select one of the setup menu categories, then press (+). 4 Press T/Ÿ to select a setup item, then press > or (>). - Ш [OSD Lang] (On-Screen Display) You can switch the display language on the TV screen. 5 Select the option you wish to change and press (+) to confirm and go back to the previously selected item. Ш [Control for HDMI] This function is available when you connect the system and a TV that is compatible with the Control for HDMI function via an HDMI cable. [On]: You can operate mutually between components that are connected via an HDMI cable. [Off]: Off. 6 Press SETUP to turn off the menu. Selected category Setup categories Ш [HDMI Audio] This setting is only required if you are using the HDMI OUT jack for an audio connection. [Off]: Turns off HDMI audio output. You can still enjoy sound output via the speaker system, [All]: The HDMI audio output format will be same аз the audio stream being played. If the playback audio format is not supported, the audio output will be changed to PCM automatically. [РСМ]: HDMI audio output will be downmixed to linear PCM (2-channel). Selected setting Options Ш [TV Display] [16:9]: Select this when you connect a wide- screen TV or a TV with a wide mode function. 22 This system can only play back a standard circular disc. Using neither standard nor circular discs (e.g., card, heart, or star shape) may cause a malfunction. Troubleshooting If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. Do not use a disc that has a commercially available accessory attached, such as a label or ring. On heat radiation Due to the slim type of main unit design, you may feel some heat on the top of the unit. This is normal. Please consult your nearest Sony dealer if you have any questions. The power is not turned on. e Check that the AC power cord (mains lead) is connected securely. The sound doesn't output from the surround speakers. e Press SURROUND repeatedly and select “MULTI” (A.ED. MULTI) to output sound from all speakers. (Depending on the media, sound may not be output from the surround speakers.) The [Speaker Setup Page] items cannot be changed. e Press DVD/CD, then eject the disc. There is no sound. Severe hum or noise is heard. e Remove the speaker cords from the SPEAKERS terminals, straighten and extend the contact area of each speaker cord, then reconnect the speaker cords to the SPEAKERS terminals. ® Clean the disc. The sound loses stereo effect when you play a VIDEO CD or CD. e Set the audio setting to [Stereo] by pressing AUDIO. 26 Center SS-CT121 Dimensions (approx.) 83 mm x 119 mm x 100 mm (3% in x 43/4 шх 4 in) (w/h/d) parts incl. projecting parts Mass (approx.) 2.1 kg (4 № 11 oz) Dimensions (approx.) 340 mm x 56 mm x 325 mm (13 Ч in x 2 '/4in x 12 7/s in) Mass (approx.) 0.43 kg (16 oz) | Design and specifications are subject to Surround change without notice. $S-T$121 Dimensions (approx.) 83 mm x 119 mm x 100 mm (3 /s in x 43/;in x 4 in) (w/h/d) incl. projecting parts Mass (approx.) 0.39 kg (14 oz) Subwoofer SS-W5121 Dimensions (approx.) 160 mm x 315 mm x 295 mm (6% in x 121% inx 1172 in) (w/h/d) incl. projecting parts Mass (approx.) 3.0 kg (6 lb 10 oz) General Power requirements North American and Mexican models: 120 Y AC, 60 Hz Latin American models: 110 Y - 240 V AC, 50/60 Hz 220 V - 246 V AC, 50/60 Hz Power consumption North American and Mexican models: On: 29 М Standby: 0.4 W* On:34W Standby: 0.5 W* Other models: Other models: PA Valid when the system is in the following status: — [Control for HDMI] is set to [Off]. 30 (w/h/d) incl. projecting Press REPEAT repeatedly to select the desired playback mode. The selected mode appears in the front panel display. e “REP CHP”: Repeats the current chapter. e “REP TT”: Repeats the current title. e “REP ALL’: Repeats all titles. e “REP TRK”: Repeats the current track. e “REP OFF”: The system returns to normal playback mode. e “SHUFFLE”: Plays the contents once in random order until all the contents have been played. e “SHUF REP”: Repeats shuffle play. e “FOLDER”: Plays the current folder, e “RANDOM”: Plays all files in random order. e “SINGLE”: Plays the current file. e “REP ONE”: Repeats the current file. e “REP FLD”: Repeats the current folder. Note e The selectable modes and their order differ depending on the disc or file. Ш [Screen Saver] [On]: The screen saver image appears if you do not operate the system for about 15 minutes. [ОН]: Off. Ш [Last Memory] This system recalls the point where you stopped the disc the last time it was played and resumes playback from that point the next time you insert the same disc. [On]: The system stores the resume points in memory. [Off]: The system does not store the resume points in memory. Playback restarts at the resume point only for the current disc in the unit. Note e When the resume playback memory is full, the resume playback point for the earliest disc is deleted. Ш [Auto Standby] [On]: Enters standby mode automatically when in stop, pause, no disc, or eject mode for more than 30 minutes. [Off]: The unit does not enter standby mode automatically. Ш [Level] You can adjust the sound level of all the speakers and the subwoofer. [L]: Adjusts the sound level of left speaker. It is possible to adjust the parameter from -6.0 dB to +0.0 dB. [С]: Adjusts the sound level of center speaker. It is possible to adjust the parameter from -6.0 dB to +6.0 dB. [R]: Adjusts the sound level of right speaker. It is possible to adjust the parameter from -6.0 dB to +0.0 dB. Selecting the Sound Effect Press EQ to display the current mode. While the current mode is displayed, press EQ repeatedly until the desired mode appears on the front panel display. ® “AUTO”: Automatically selects the movie or music sound mode based on the disc type. ® “MOVIE”: Enjoyable, powerful bass and sound effects; recommended for movies. e “MUSIC”: Well-balanced low and high range; recommended for music. e “TV”: Clear, mid-range vocals; recommended for watching dramas or comedies. e “GAME”: Enhanced low and high range; recommended for action or shooting games, etc. Press SURROUND to display the current mode. While the current mode is displayed, press SURROUND repeatedly to select the desired surround audio output mode. The selected mode appears in the front panel display. e “MULIT” (A.ED. MULTI): When the source is 2 channel, sound is output from all speakers. e “STANDARD” (A.ED. STANDARD): The system discriminates the sound format of the source and presents sound as it was recorded/encoded. ® “DOLBY PL’ (PRO LOGIC): Performs Dolby Pro Logic decoding. ® “2CH ST” (2CH STEREO): All formats are downmixed to 2 channels. Note Depending on the playback stream, the surround settings may not be effective. [SR]: Adjusts the sound level of right surround speaker. It is possible to adjust the parameter from -6.0 dB to +6.0 dB. [SL]: Adjusts the sound level of left surround speaker. It is possible to adjust the parameter from -6.0 dB to +6.0 dB. [SW]: Adjusts the sound level of subwoofer. It is possible to adjust the parameter from -6.0 dB to +6.0 dB. Ш [Distance] If you move one of the speakers, be sure to set the parameters of the distance from the listening position to speakers. [L/R]: Adjusts the distance of the left/right speakers. It is possible to adjust the parameter from 1.0 m to 7.0 m (3 to 23 ft). [С]: Adjusts the distance of the center speaker. This parameter can be set between 1.6 m (5 ft) shorter and equal to the L/R channel setting. [SL/SR]: Adjusts the distance of the left/right surround speaker. This parameter can be set between 5.0 m (16 ft) shorter and equal to the L/R channel setting. № [Center Speaker] [On]: Activates the center speaker. [Off]: Deactivates the center speaker. № [Sur. Speaker] [On]: Activates the surround speakers. [Off]: Deactivates the surround speakers. Ш [Test Tone] The speakers will emit a test tone to set the Level. [On]: The speakers emit the test tone. [Off]: The speakers do not emit the test tone. Tip ® To adjust the volume of all speakers, press VOLUME +/- on the unit or on the remote control. e Press €/4/¥/> repeatedly to select the speaker and the desired level or distance. 23 There is no picture. * The video connecting cords are not connected securely. * The unit is not connected to the correct TV input jack. ® The system is not selected via the video input of the TV. e Check the output method on your system. Even though you set the aspect ratio in [TV Display] of [General Setup Pagel, the picture does not fill the TV screen. * The aspect ratio on the disc is fixed. Color irregularity occurs on the TV screen. The systems speakers contain magnet parts, so magnetic distortion may occur. When color irregularity occurs on the TV screen, check the following items. ® Install the speakers at least 0.3 meters (1.0 ft) from your TV set. e If the color irregularity persists, turn off the TV set once, then turn it on after 15 to 30 minutes. ® Reposition the speakers farther away from your TV set. The [TV Typel setting does not match your TV. [TV Type] can be reset according to the following procedure: 1. Press & to take out the disc. 2. Press (7 DISPLAY. 3. Press ©. [TV Type] will be reset. “PROTECT” appears in the front panel display. ® Connect all channels to their corresponding SPEAKERS terminals correctly. e Press 1/( to turn off the system, and check the following items after “STANDBY” disappears: — Are the + and - speaker cords short- circuited? — Is anything blocking the ventilation holes of the system? e After checking the above items and fixing any problems, turn on the system. If the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer. A disc cannot be ejected and “LOCKED” appears in the front panel display. e Contact your Sony dealer or local authorized Sony service facility. Radio stations cannot be tuned in. e Check that the antenna (aerial) is connected securely. Adjust the antenna (aerial) or connect an external antenna (aerial) if necessary. A disc does not play. e The region code on the DVD does not match the system. e Moisture has condensed inside the unit and may cause damage to the lenses. Remove the disc and leave the unit turned on for about half an hour. A DATA CD/DATA DVD cannot be played. e The DATA CD is not recorded in ISO 9660 Level 1/Level 2, or Joliet. ® The DATA DVD is not recorded in UDF (Universal Disk Format). 27 31 Using a Tuner You can preset 20 FM stations. You can then tune in any ofthose stations simply by selecting the corresponding preset number. 1 PressFM. 2 Press and hold TUNING +/- for 2 seconds to start tuning until you find the desired radio station. “SEARCH +” or “SEARCH -” appears in the front panel display until a radio station with sufficient signal strength is found. 3 Press and hold SHIFT, then press PROGRAM. “РОГ” flashes in the front panel display. 4 Press and hold SHIFT, then press the number buttons to select a preset number. 5 Press © to store the station frequency. 1 Press FM. 2 Press PRESET +/- to select a preset number. You can also select a preset number by pressing and holding SHIFT, then pressing the number buttons. If an FM program is noisy, you can select monaural reception. There will be no stereo effect, but reception will improve. Press AUDIO, “STEREO”: Stereo reception. “MONO”: Monaural reception. Ш [HDMI Resolution] You can select the type of video signal that is output from the ADMI OUT jack. [Auto]: The system outputs the optimal video signal for the connected TV. [480р/576р]: The system outputs 720 x 480p* or 720 x 576p* video signals. [720р]: The system outputs 1280 x 720p* video signals. [10801]: The system outputs 1920 x 1080i* video signals. [1080p]: The system outputs 1920 x 1080p* video signals. # i: interlace, p: progressive Ш [TV Type] The TV type default setting varies depending on the area. [PAL]: For a PAL-system TV. [NTSC]: For an NTSC-system TV. Ш [Audio] You can select the preferred audio language for DVDs with multiple sound tracks. Ш [Subtitle] You can switch the language of the subtitles recorded on a DVD VIDEO. Ш [Disc Menu] You can switch the language for a disc's menu. Ш [Parental] You can restrict playback of DVDs that have ratings. Scenes may be blocked or replaced with different scenes. A JPEG image file cannot be played. ® It is larger than 2,048 (width) x 1,536 (height) in normal mode, or more than 2,000,000 pixels in progressive format which is mainly used on Internet Web sites. A video file cannot be played. ® The video file resolution is larger than 720 (width) x 576 (height). The name of a folder or file is not displayed correctly. ® The system can only display numbers and letters of the alphabet. Other characters are displayed as |_|. A disc does not start playing from the beginning. ® Resume Play has been selected. During stop, press № and then start playback. * Program play has been selected. During stop, press № and then start playback. ® Shuffle play has been selected. During stop, press № and then start playback. The system does not work normally. ® Disconnect the AC power cord (mains lead) from the wall outlet (mains), then reconnect after several minutes. The Control for HDMI function does not work. e Set the [Control for HDMI] setting in [General Setup Page] to [On]. ® Make sure that the connected component is compatible with the Control for HDMI function. ® Check the connected components setting for the Control for HDMI function. Refer to the operating instructions supplied with the component. 20 1 Press T/Ÿ to select a rating level from 1 to 8 or [Off], then press (>. 2 Press and hold SHIFT, then press the number buttons to enter your 6-digit password. Ш [Default] This feature enables you to reset all the setup menu options and your personal settings to the factory defaults, except for your password for the [Password] and [Parental | items. Press (+) to confirm the default reset. Ш [Password] The default password is “000000.” To change the password: 1 Press and hold SHIFT, then press the number buttons to enter “000000” or your last set 6-digit password in the [Old Password] section. 2 Press and hold SHIFT, then press the number buttons to enter a new 6- digit password in the [New Password] section. 3 Press and hold SHIFT, then press the number buttons to enter the new 6- digit password again in the [Confirm PWD] section to confirm your entry. 4 Press [OK] to exit the menu. 24 “OVERLOAD” appears in the front panel display. e Remove the USB device from the Y (USB) port. Make sure there is no problem with the USB device. The USB device (audio file/JPEG image file) cannot be played. e Files that are encrypted or protected by passwords, etc., cannot be played. * There is no playable file in the USB device. 28 http: /Awww.sony.net/ 32 ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- DVD player Black
- 300 W 5.1 channels
- Dolby Digital, Dolby Pro Logic
- Equalizer