Grand Banks 42 Classic boat Operation manual

Below you will find brief information for boat Grand Banks 42 Classic. This manual describes how to safely operate boat Grand Banks 42 Classic. You will find information about engine start-up and shut down, getting underway and cruising. It also covers docking, fueling, electrical systems and sanitation system.

PDF Download
Document
Grand Banks 42 Classic Operation Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Engine start-up and shut down
  • Getting underway and cruising
  • Docking, fueling
  • Electrical systems
  • Sanitation system

Frequently asked questions

First, check the engine room, then turn on the STOP switch, then turn on the engine POWER switch, press the STARTING button, release the start button, move throttle to 700 RPM, repeat the procedure for the other engine.

Use the FLYBRIDGE HELM for greater visibility. Use only the GEARSHIFTS and THROTTLES to maneuver the boat. Have your crew ready the lines and fenders and give clear instructions on how you will be docking.

Ensure the FW PUMP and ELECTRIC HEAD breakers in the DC panel are turned on. To flush, press down on the foot peddle for about three seconds. The holding tank is located in the engine room under the generator. Be aware of the rate of waste production.

The heating system is a closed system. It can provide heat only, heat with continuous hot water or continuous hot water only.

Key features include engine start-up and shut down, getting underway and cruising, docking, fueling, electrical systems and sanitation system.
Preparing document for printing…
0%