Schneider Electric Wiser Smart Plug 16 A lets you control your home appliances and monitor energy consumption right from your smartphone. You can switch devices on and off remotely, set schedules, create moments and automations, and check power consumption history. It's easy to set up – just plug it in, download the Wiser app, and follow the simple pairing instructions.
advertisement
Wiser Smart Plug 16 A
Device user guide
Information about features and functionality of the device.
11/2022
www.se.com
Legal Information
The Schneider Electric brand and any trademarks of Schneider Electric SE and its subsidiaries referred to in this guide are the property of Schneider Electric SE or its subsidiaries. All other brands may be trademarks of their respective owners.
This guide and its content are protected under applicable copyright laws and furnished for informational use only. No part of this guide may be reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), for any purpose, without the prior written permission of
Schneider Electric.
Schneider Electric does not grant any right or license for commercial use of the guide or its content, except for a non-exclusive and personal license to consult it on an "as is" basis. Schneider Electric products and equipment should be installed, operated, serviced, and maintained only by qualified personnel.
As standards, specifications, and designs change from time to time, information contained in this guide may be subject to change without notice.
To the extent permitted by applicable law, no responsibility or liability is assumed by
Schneider Electric and its subsidiaries for any errors or omissions in the informational content of this material or consequences arising out of or resulting from the use of the information contained herein.
Table of Contents
Safety information
.......................................................................................4
Wiser Smart Plug 16 A
...............................................................................5
Pairing device manually.........................................................................6
Pairing device with auto scan.................................................................8
Changing the device icon ......................................................................9
Renaming the device ..........................................................................10
Changing the device location ...............................................................10
Switching On/Off the device manually...................................................12
Switching On/Off the device using app..................................................12
Creating a schedule ............................................................................13
Checking the power consumption.........................................................13
Creating a moment .............................................................................14
Creating an automation .......................................................................16
Compliance information for Green Premium products ............................22
DUG_Wiser Smart Plug_WSE_01 3
4
Safety information
Important information
Read these instructions carefully and look at the equipment to become familiar with the device before trying to install, operate, service, or maintain it. The following special messages may appear throughout this manual or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.
The addition of either symbol to a “Danger” or “Warning” safety label indicates that an electrical hazard exists which will result in personal injury if the instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that accompany this symbol to avoid possible injury or death.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Failure to follow these instructions will result in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE
NOTICE is used to address practices not related to physical injury.
DUG_Wiser Smart Plug_WSE_01
Wiser Smart Plug 16 A
CCT711119
For your safety
RISK OF DAMAGE TO DEVICE
NOTICE
Always operate the product in compliance with the specified technical data.
Failure to follow these instructions can result in equipment damage.
RISK OF DAMAGE TO DEVICE
CAUTION
• The plug must be used indoors only.
• To disconnect the plug from the power supply, pull it out of the socket outlet or turn Off the fuse in the incoming circuit.
• Do not connect plugs one after another.
• Do not install in places with high humidity or extreme temperatures.
• Do not expose the smart plug to flammable liquids, gases or other explosives.
Failure to follow these instructions can result in injury or equipment damage.
About the device
The Wiser Smart Plug (hereinafter referred to as Plug ) is used as a plug adapter to control various electrical devices such as floor lamps, radios, ventilators or coffee machines manually or using Wiser app. The plug can also monitor energy consumption of plugged-in devices. The wall socket needs to be switched On for it to function.
NOTE: Do not insert the plug into socket outlets that are behind large objects or furniture such as refrigerators or cabinets that reduces the radio reception.
Control options
Home control : To control the plug in your home through the Wiser app you will need the Wiser Gateway.
DUG_Wiser Smart Plug_WSE_01 5
6
Direct operation : The plug can always be controlled directly on-site. To do this, you can switch the plug On and Off with the operation button.
Functions
• Switching On and Off plugged-in devices manually and remotely via app.
• Setting a timer or a time schedule (via app)
• Visibility of load status (via app)
• Monitoring and visualization of energy consumption (via app)
Operating elements
1. A: Socket for protective earthing and standardized European plugs
2. B: Status LED
3. C: Operation button
4. D: Plug fitting to a European protective earthing socket outlet
A
B
C
D
Installing the device
Refer to the installation instruction supplied with this product.
See Wiser Smart Plug .
Pairing the device
Using the Wiser app, first pair your device with the Gateway to access and control the device. You can either add the device manually or do an auto-scan to pair it.
NOTE: The Plug shows a non-zero power consumption value when the device is added to the app if the Plug was in ON state with a load connected before pairing it to the Gateway .
Pairing device manually
To pair the device manually:
1. On Home page, tap + .
2. Tap and select the required Wiser Hub on the slide-up menu.
DUG_Wiser Smart Plug_WSE_01
3. Select an option to add the device (A):
– Add Device with Install Code
– Add Device without Install Code
Add Device
Install Code is Recommended device.
If you are unable to scan or type the install code, you can still add the device without it.
Add Device without Install Code
A
TIP: It is highly recommended to add the device with install code.
4. To pair the device with install code, tap Add Device with Install Code to display the slide-up menu. Select any one of the options (B):
– Scan Install Code - you can scan the device for the install code
– Enter Install Code Manually - you can manually enter the install code from the device
After pairing the device with install code, proceed to Step 6 .
DUG_Wiser Smart Plug_WSE_01
B
Cancel
5. To pair the device without install code, tap Add Device without Install Code .
6. Short press the operation button 3 times (< 0,5 s).
3× < 0,5 s
↓
The LED blinks orange.
7
8
7. In the app, select Confirm LED is flashing orange and tap Start configuration (C).
Cancel
How to pair device
Short-press function key 3 times.
3
C
8. After a few seconds, a solid green LED indicates that the device is successfully paired to the Gateway/Hub .
…
↓
9. Once the device is added in the app, tap Done .
Pairing device with auto scan
Pairing the device with auto scan automatically discovers the device when the corresponding device is powered on.
To pair the device with auto scan:
1. On the Home page, tap + .
2. Tap Auto scan and tap Confirm .
3. If you have multiple hubs, do Step 4 or proceed to Step 5.
4. Tap Select hub and select the Wiser hub from the slide-up menu.
5. Short press the operation button 3 times (< 0,5 s).
NOTE:
• The LED blinks orange.
• Wait for a few seconds until the device search is complete.
TIP: If you want to pair multiple devices at once, perform step 5 on each device and wait for a few seconds.
DUG_Wiser Smart Plug_WSE_01
6. Tap Next (A) and select Smart Plug .
Auto Scan
Available devices found
Smart Plug 16A
Next
A
7. Once the device is added successfully, tap Done .
Configuring the device
Changing the device icon
You can change the device icon using the Wiser app.
1. On the Home page, select the device for which you wish to change the icon.
2. At the top-right corner of the screen, tap .
3. Tap edit next to the device name.
4. Tap Icon to view the menu.
5. In the slide-up menu, select any one of the following (A) to change the device icon:
– Take photo - allows you to click a photo from the mobile camera.
– Select from Icon Library - allows you to select an icon from the app library.
– Select from Album - allows you to select a photo from the mobile gallery.
DUG_Wiser Smart Plug_WSE_01 9
Renaming the device
You can rename the device using the Wiser app.
1. On the Home page, select the device for which you wish to rename.
2. At the top-right corner of the screen, tap .
3. Tap edit next to the device name.
4. Tap Name , enter the new name (A) and then tap Save .
Rename
Cancel Save
A
Changing the device location
You can change the device location using the Wiser app.
1. On the Home page, select the device for which you wish to change the location.
2. At the top-right corner of the screen, tap
Save
.
3. Tap edit next to the device name.
4. Tap Location .
5. Select the desired location from the list (A) and then tap Save .
Device location
Master Bedroom
Kitchen
Study Room
Kids Room
A
Removing the device
Using the Wiser app, you can remove a device from the device list.
To remove the device:
10 DUG_Wiser Smart Plug_WSE_01
1. On the Home page, tap All devices > Smart Plug .
2. Tap to display more details.
3. Tap Remove and Factory Reset Device (A).
More
Smart Plug
Device information
Moment and Automation
Others
Add to home Screen
A
TIP: On the Home page, tap and hold the Smart Plug to remove the device.
NOTE: By removing the device, you will reset the device. If you still have a problem with the reset, then refer to
.
Resetting the device
You can reset the device to factory default manually.
To reset the device:
1. Short press the operation button three times (< 0.5 s) and then long press the operation button once (>10 s).
2. After 10 s, LED starts blinking red then release the operation button.
The LED stops blinking upon successful reset of the device.
3. The Plug restarts and blinks green for a few seconds.
NOTE: After reset, the LED turns off.
3× < 0.5 s + 1× 10 s
↓
…
↓
Using the device
The Control Panel allows you to switch the Plug On and Off and monitor the power consumption.
On the Home page, tap All devices > Smart Plug to access the control panel.
On the Plug control panel page, you can see the following:
• Power (W) - The load value of the device connected to the Plug (A)
DUG_Wiser Smart Plug_WSE_01 11
• Day (kWh) - The total power consumption of the device connected to the Plug per day (B)
NOTE: The total power consumption per day value will automatically reset to zero at 00:00 hrs everyday.
• The current state of the Plug (C)
•
(D)
•
(E)
Smart Plug
A
Power(W)
4.00
Day(kWh)
0.00
B
C
On
D
E
Schedule
Consumption
Switching On/Off the device manually
You can switch On/Off the Plug manually. The Plug will provide power to the electrical appliance connected to it.
Short press the operation button on the device once to switch On/Off the Plug.
< 1s
Switching On/Off the device using app
By using the Wiser app, you can switch on/off the Plug.
To switch the Plug on/off:
1. On the Home page, tap the power button (A) to switch on/off the device.
Home
My Home
Welcome Home
Set your home location for more information.
Away
• • •
A
All Devices
Smart Plug
Home Automations
12 DUG_Wiser Smart Plug_WSE_01
2. Alternatively, you can navigate to the
of the device and tap to switch on/off the Plug.
NOTE: The control panel shows the current state of the Plug.
Creating a schedule
The Plug can be controlled and triggered by a schedule. Once the schedule is set, your system will follow the active schedule. You can create or modify the schedules at any time.
To create a schedule:
1. On the Home page, tap All devices > Smart Plug .
2. Tap Schedule > Add schedule to add a schedule.
3. Set the time (A).
4. Tap Repeat (B) to select the days you want to set the schedule.
5. Tap Note (C), enter the note and tap Confirm .
6. Tap the toggle switch (D) to turn On the Notification for the schedule. The app will send a notification that the scheduled task is executed at the time of schedule.
7. Tap Smart Plug (E) and select one of the options:
– On - Turns On the Plug on the scheduled time
– Off - Turns Off the Plug on the scheduled time
Add Schedule Save
19 20
20 21
21 22
A
B
C
Note
Once
E
Smart Plug On
Note - The Schedule works according to the timezone where device is located.
D
8. Tap Save .
Checking the power consumption
Using the Wiser app, you can monitor the power consumption of the load connected to the device by accessing the consumption feature.
TIP: You can see the daily real-time power consumption value of the load connected to the device on the
of the device.
To see the history of device power:
1. On the Home page, tap All devices > Smart Plug .
2. On the device control panel page, tap Consumption .
DUG_Wiser Smart Plug_WSE_01 13
3. In the Consumption page, you can see the total power consumption and it’s changes in Week (A), Month (B), and Year (C) view in the graph.
You can tap each bar on the graph to see the total power consumed on a particular day/month.
A
Consumption
Month Year
B
Consumption
Month Year
Consumption
Month Year
C
KWh 3 KWh KWh
Mon Tue Wed Thu Fri Sat Sun J F M M J J
Months
S N
Creating a moment
A Moment allows you to group multiple actions that are usually done together.
Using the Wiser app, you can create moments based on your needs (such as movie night).
To create a moment:
1. On the Home page, tap .
2. Go to Moment > + to create a moment.
3. Tap Edit name , enter the name of the moment (A) and tap Save .
TIP : You can choose the cover image that represents your moment by tapping .
Edit name
A
Cancel
Edit name
Add Task
Save
4. In the Action section, tap Add task (B) to display the slide-up menu.
14 DUG_Wiser Smart Plug_WSE_01
5. In the Add task menu, you can do either or all of the following actions (C):
– Run the device - Select the devices that you want in a moment.
– Select Automation - Select the automation that you want to enable or disable.
– Delay - Set the delay time.
NOTE : You can add one or more actions using .
My settings
Show on Home Page Add task
Select Automation
Delay
B
C
6. Tap Run the device > Smart Plug to select either or all of the functions to add in the moment:
– On - Turn on the Plug (D)
– Off - Turn off the Plug (E)
– Reverse Switch - Toggle the last state of the Plug (F)
D
E
F
On
Smart Plug
Save Cancel
7. Once all the actions are set, tap Save .
Cancel Moment settings Save
My Moments
Action
Smart Plug
Show on Home Page
(1/80)
Smart Plug:On
DUG_Wiser Smart Plug_WSE_01 15
Editing a moment
To edit a moment:
1. On the Moment tab, locate the moment you want to edit and tap .
2. On the Edit page, you can tap each item (such as dimmer, shutter, delay, temperature, etc.) to change the settings.
TIP:
• You can add one or more actions using .
• To delete an existing action, slide the each item towards left and tap
Delete .
Deleting a moment
To delete a moment:
1. On the Moment tab, locate the moment that you want to delete and then tap
.
2. Tap Delete and tap Ok .
NOTE: After deleting a moment, the device action can no longer be triggered.
Creating an automation
An automation allows you to group multiple actions that are usually done together, triggered automatically or at scheduled times. By using the Wiser app, you can create automations based on your needs.
To create an automation:
1. On the Home page, tap the .
2. Go to Automation > + to create an automation.
3. Tap Edit name , enter the name of the automation (A) and tap Save .
TIP : You can choose the cover image that represents your automation by tapping .
My Automation
A
Cancel
Add Condition
16 DUG_Wiser Smart Plug_WSE_01
4. Tap Any condition is met to select any one of the condition type (B):
– All conditions are met - The automation is triggered when all the conditions are met.
– Any condition is met - The automation is triggered when at least one condition is met.
My Automation
Select Condition type
All conditions are met
Any condition is met
Cancel
B
5. Tap Add Condition to display the slide-up menu.
6. In the Add Condition menu, you can do either or all of the following options
(C):
– When weather changes - Select the various weather settings.
– Schedule - Set the time and day.
– When device status changes - Select the device and it’s function.
Note: You can add one or more conditions using .
My Automation
Schedule
Add Condition
C
DUG_Wiser Smart Plug_WSE_01 17
7. Tap When device status changes > Smart Plug and select either or all the functions:
– Smart Plug - Turn on/off the Plug (D).
– Power (W) - The real-time load value of the connected device (E).
– Daily Consumption (kWh) - The total energy consumption value daily
(F).
– Monthly Consumption (kWh) - The total energy consumption value monthly (G).
Select function
D
E
F
G
Smart Plug
Power(W)
Daily Consumption
Monthly Consumption
8. Tap Add task to open the slide-up menu.
9. In the Add task menu, you can do either or all of the following options (H):
– Run the device - Select the devices that you want to be trigger.
– Moment or Automation - Select the moment which you want to trigger or select the automation that you want to enable or disable.
– Send notification - Turn On notification for the automation.
– Delay - Set the delay time.
NOTE : You can add one or more actions using .
18 DUG_Wiser Smart Plug_WSE_01
10. Tap on Effective period to set the time range for the automation. You can select any one of the following (I):
– All-day - 24 hours
– Daytime - From sunrise to sunset
– Night - From sunset to sunrise
– Custom - User defined time period
Next
24 hours
From sunrise to sunset
I From sunset to sunrise
Custom
Repeat
City
11. Once all the actions and conditions are set, tap Save .
Once the automation is saved, it is visible on the Automation tab. You can tap the toggle switch on the automation to enable it.
Example of an automation
This demonstration shows you how to create an automation to get notification on your app when the total power consumption of the device connected to the Plug is
50 kWh.
1. Go to Automation > + to create an automation.
2. Tap Edit name , enter the name of the automation and tap Save .
TIP : You can choose the cover image that best represents your automation by tapping .
3. Tap Add Condition > When device status changes > Smart Plug .
4. Tap Daily Consumption , select the total power consumption value (A) and tap Next .
TIP: You can set the power consumption value as 50 kWh.
Consumption Next when daily consumption exceeds
9 9 9 4 9 9
0 0 0 5 0 0 kWh
1 1 1 6 1 1
A
DUG_Wiser Smart Plug_WSE_01 19
5. Tap Add task > Send notification and select Notifications (B) then tap
Next .
Next
Multiple items Selectable
B
6. In the Automation Settings page, tap Save .
Cancel Automation settings Save
My Automation
Any condition is met (1/10)
Action
Smart Plug
Daily Consumption (kWh):>50.00kWh
(1/80)
On
All-Day
Once the automation is saved, it is visible on the Automation tab. You can tap the toggle switch on the automation to enable it.
Editing an automation
To edit an automation:
1. On the Automation tab, locate the automation you want to edit and tap .
2. On the Edit page, you can tap each item (such as dimmer, shutter, delay, temperature, etc.) to change the settings.
TIP:
• You can add one or more actions using .
• To delete an existing condition or action, slide each item towards left and tap Delete .
Deleting an automation
To delete an automation:
1. On the Automation tab, locate the automation that you want to delete and then tap .
2. Tap Delete and tap Ok .
NOTE: After deleting an automation, the device action can no longer be triggered.
20 DUG_Wiser Smart Plug_WSE_01
LED Indications
Pairing
User Action
Press the operation button 3 times
LED Indication
LED blinks orange, once per second.
Status
Pairing mode is active for 30 seconds.
When pairing is completed, LED glows green for some time before turning Off.
Resetting
User Action
Press the operation button 3 times and hold it down once for > 10 s.
LED Indication
After 10 s, the LED starts blinking red.
Status
The device is in reset mode. It is reset to the factory settings after 10 seconds. The device then restarts and the LED starts blinks green before turning Off.
Technical Data
Nominal voltage
Nominal power
AC 230 V, 50 Hz
Load type
LED
Load value
100 W
300 W
500 W
3680 W
3680 W
Nominal current
Standby
Operating temperature
Neutral conductor
Fuse protection
IP rating
Operating frequency
Max. radio-frequency power transmitted
Product dimensions
(H X W X D)
Communication protocol
DUG_Wiser Smart Plug_WSE_01
16 A
Maximum 0.5 W
0 °C to 35 °C
Required
16 A circuit breaker
IP20
2405 - 2480 MHz
8.2 dBm
60 X 60 X 65 mm
Zigbee 3.0 certified
21
Compliance
Compliance information for Green Premium products
Find and download comprehensive information about Green Premium products, including RoHS compliance and REACH declarations as well as Product
Environmental Profile (PEP) and End-of-Life instructions (EOLI).
General information about Green Premium products
Click the link below to read about Schneider Electric’s Green Premium product strategy.
https://www.schneider-electric.com/en/work/support/green-premium/
Find compliance information for a Green Premium product
Click the link below to search for a product’s compliance information (RoHS,
REACH, PEP and EOLI).
NOTE: You will need the product reference number or product range to perform the search.
https://www.reach.schneider-electric.com/CheckProduct.aspx?cskey= ot7n66yt63o1xblflyfj
Trademarks
This guide makes reference to system and brand names that are trademarks of their relevant owners.
• Zigbee ® is a registered trademark of the Connectivity Standards Alliance.
• Apple ® and App Store ® are brand names or registered trademarks of Apple
Inc.
• Google Play™ Store and Android™ are brand names or registered trademarks of Google Inc.
• Wi-Fi ® is a registered trademark of Wi-Fi Alliance ® .
• Wiser™ is a trademark and the property of Schneider Electric, its subsidiaries and affiliated companies.
Other brands and registered trademarks are the property of their respective owners.
22 DUG_Wiser Smart Plug_WSE_01
Schneider Electric
35 rue Joseph Monier
92500 Rueil Malmaison
France
+ 33 (0) 1 41 29 70 00 www.se.com
As standards, specifications, and design change from time to time, please ask for confirmation of the information given in this publication.
© 2021 – Schneider Electric . All rights reserved.
DUG_Wiser Smart Plug_WSE_01
advertisement