STMicroelectronics ST40 Micro Toolset User Manual

284
Cross development tools reference
GDB command file
Usage
sh4targets-board.cmd
Defines commands for connecting to all the targets of type
board (both silicon and simulated targets).
sh4targets.cmd
Defines commands for connecting to all the targets supported
by the ST40 Micro Toolset including simulated targets. Sources
all the sh4targets-board.cmd GDB script files and the
sh4commands.cmd GDB script file.
shsimcmds.cmd
Defines commands to control the internal configuration of the
SuperH SH-4 simulator shipped with the ST40 Micro Toolset.
stb7100ref.cmd
Defines commands which set the configuration registers for the
STb7100 on an STMicroelectronics STb7100-Ref board.
st40clocks.cmd
Defines commands to change the frequencies of the various
internal clocks of ST40 silicon.
st40gx1.cmd
Defines commands describing the core memory regions and
other attributes of an ST40GX1.
st40ra.cmd
Defines commands describing the core memory regions and
other attributes of an ST40RA.
stb7100.cmd
Defines commands describing the core memory regions and
other attributes of an STb7100.
stb7100clocks.cmd
Defines commands to display the frequencies of the various
internal clocks of an STb7100 or an STb7109.
stb7100jtag.cmd
Defines commands for configuring the connection between an
ST Micro Connect and the ST40 CPU of an STb7100 or an
STb7109.
stb7109.cmd
Defines commands describing the core memory regions and
other attributes of an STb7109.
std2000.cmd
Defines commands describing the core memory regions and
other attributes of an STd2000.
sti5528.cmd
Defines commands describing the core memory regions and
other attributes of an STi5528.
sti5528clocks.cmd
Defines commands to display the frequencies of the various
internal clocks of an STi5528.
Table 51: GDB command files
STMicroelectronics
ST40 Micro Toolset User Manual
ADCS 7379953J
">