1 EC-TYPE EXAMINATION CERTIFICATE

1 EC-TYPE EXAMINATION CERTIFICATE
1
2
EC-TYPE EXAMINATION CERTIFICATE
Equipment or Protective systems intended for use in Potentially
Explosive Atmospheres - Directive 94/9/EC
3
EC-Type Examination Certificate No:
FM12ATEX0029X
4
Equipment or protective system:
(Type Reference and Name)
ST700 and ST800 Pressure Transmitters
STD.. Differential Pressure Transmitter
STG.. Gauge Pressure Transmitter
STA.. Absolute Pressure Transmitter
STR.. Remote Seal Pressure Transmitter
STF.. Flange Mounted Liquid Level Transmitter
5
Name of Applicant:
Honeywell International – Honeywell Field Solutions
6
Address of Applicant:
512 Virginia Avenue
Fort Washington, PA 19034
USA
7
This equipment or protective system and any acceptable variation thereto is specified in the schedule to this
certificate and documents therein referred to.
8
FM Approvals Ltd, notified body number 1725 in accordance with Article 9 of Directive 94/9/EC of 23 March
1994, certifies that this equipment has been found to comply with the Essential Health and Safety Requirements
relating to the design and construction of equipment intended for use in potentially explosive atmospheres given
in Annex II to the Directive.
The examination and test results are recorded in confidential report number:
3042224EC dated 08th June 2012
9
Compliance with the Essential Health and Safety Requirements, with the exception of those identified in item 15
of the schedule to this certificate, has been assessed by compliance with the following documents:
EN 60079-0:2009, EN 60079-1:2007, EN 60079-26:2007, EN 60079-31:2009 & EN 60529:1991 + A1:2000
10
If the sign ‘X’ is placed after the certificate number, it indicates that the equipment is subject to special
conditions for safe use specified in the schedule to this certificate.
11
This EC-Type Examination certificate relates only to the design, examination and tests of the specified
equipment or protective system in accordance to the directive 94/9/EC. Further requirements of the Directive
apply to the manufacturing process and supply of this equipment or protective system. These are not covered by
this certificate.
12
The marking of the equipment or protective system shall include:
II 1/2 G Ex d IIC T4 Ta= -50°C to 85°C, or when fitted with display, Ta= -20°C to 70°C; IP66 / IP67
II 2 D Ex tb IIIC T95°C Ta= -50°C to 85°C, or when fitted with display, Ta= -20°C to 70°C
Digitally signed by Mick Gower
DN: cn=Mick Gower, o=FM Approvals, ou,
[email protected],
c=GB
Date: 2013.08.16 08:57:17 +01'00'
Mick Gower
Certification Manager, FM Approvals Ltd.
Issue date: 16th August 2013
THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGE
FM Approvals Ltd. 1 Windsor Dials, Windsor, Berkshire, UK. SL4 1RS
T: +44 (0) 1753 750 000 F: +44 (0) 1753 868 700 E-mail: [email protected] www.fmapprovals.com
F ATEX 020 (May/12)
Page 1 of 5
SCHEDULE
to EC-Type Examination Certificate No. FM12ATEX0029X
13
Description of Equipment or Protective System:
The ST700 and ST800 Pressure Transmitters are electronic industrial process pressure measurement
instruments used to convert pressure to an electrical signal.
The ST700 and ST800 Pressure Transmitter enclosure is a two compartment enclosure separated by a
dividing wall comprising a terminal compartment, intended for field wiring purposes, and an electronics
compartment, containing the electronic circuit boards. The ST700 and ST800 process pressure sensors are
of a totally welded construction in various metals to meet the requirements of the intended application.
Electrical Rating: 11 to 42 Volts DC, with 4 – 20 mA output.
Model Codes:
STDa-bcdefgh-i-A-jkl-mno-p-qrs-t-v. ST700 and ST800 Differential Pressure Transmitter
a = Span: 810, 820, 825, 830, 870, 720, 730, 770
b = Materials of Construction: A, B, C, D, 1, 2, 3, E, F, G, H, 4, 5, 6, J, K, 7, 8, L, X, 9
c = Fill Fluid: 1, 2, 3, 4
d = Adapter Flange and Bolt Kit: A, H, B
e = Bolt Materials: C, S, N, K, M, D, B
f = Vent/ Drain Type/ Location: 1, 2, 3, 4, 5, 6, 7
g = Static Pressure: S, H
h = Gasket Material: A, B, C
i = Head/ Connect Orientation: 1, 2, 3
j = Electronic Housing Material and Entry Type: A, B, C, D, E, F, G, H
k = Output/ Protocol: H, D, F, P
l = Customer Interface Selections: 0, A, B, C, D, E, F, G, H, J
m = Application Software: 1, 2, 3, 4
n = Output Limit, Failsafe & Write Protect Settings: 1, 2, 3, 4, 5, 6
o = General Configuration: S, C
p = Accuracy and Calibration: A, B, C, D, E, F, G, H
q = Mounting Bracket: 0, 1, 2, 3, 4, 5, 6, 7
r = Customer Tag: 0, 1, 2
s = Conduit Plugs & Adapters: A0, A2, A6, A7, A8, A9
t = General Options: Any two digit numeric code, separated by comma
v = Factory Identification: AAAA to 9999 (Any four digit alphanumeric code) for internal factory use
STGa-bcdefg-h-A-jkl-mno-p-qrs-t-v. ST700 and ST800 Gauge Pressure Transmitter
a = Span: 830, 840, 870, 83L, 84L, 87L, 88L, 89L, 730, 740, 770, 73L, 74L, 77L, 78L, 79L
b = Materials of Construction: A, B, C, D, 1, 2, 3, E, F, G, H, 4, 5, 6, J, K, 7, 8, L
c = Fill Fluid: 1, 2, 3
d = Process Connection: A, G, H, D
e = Bolt Materials: 0, C, S, N, K, M, D, B
f = Vent/ Drain Type/ Location: 1, 2, 3, 4, 5, 6, 7
g = Gasket Material: 0, A, B, C
h = Head/ Connect Orientation: 1, 2, 3
j = Electronic Housing Material and Entry Type: A, B, C, D, E, F, G, H
k = Output/ Protocol: H, D, F, P
l = Customer Interface Selections: 0, A, B, C, D, E, F, G, H, J
m = Application Software: 1, 2, 3, 4
n = Output Limit, Failsafe & Write Protect Settings: 1, 2, 3, 4, 5, 6
o = General Configuration: S, C
p = Accuracy and Calibration: A, B, C, D, E, F, G, H
q = Mounting Bracket: 0, 1, 2, 3, 4, 5, 6, 7
THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGE
FM Approvals Ltd. 1 Windsor Dials, Windsor, Berkshire, UK. SL4 1RS
T: +44 (0) 1753 750 000 F: +44 (0) 1753 868 700 E-mail: [email protected] www.fmapprovals.com
F ATEX 020 (May/12)
Page 2 of 5
SCHEDULE
to EC-Type Examination Certificate No. FM12ATEX0029X
r = Customer Tag: 0, 1, 2
s = Conduit Plugs & Adapters: A0, A2, A6, A7, A8, A9
t = General Options: Any two digit numeric code, separated by comma
v = Factory Identification: AAAA to 9999 (Any four digit alphanumeric code) for internal factory use
STAa-bcdefg-h-A-jkl-mno-p-qrs-t-v. ST700 and ST800 Absolute Pressure Transmitter
a = Span: 822, 840, 82L, 84L, 722, 740, 72L, 74L, 77L
b = Materials of Construction: A, B, C, D, 1, 2, 3, E, F, G, H, 4, 5, 6, J, K, 7, 8, L
c = Fill Fluid: 1, 2, 3
d = Process Connection: A, G, H, D
e = Bolt Materials: 0, C, S, N, K, M, D, B
f = Vent/ Drain Type/ Location: 0, 1, 2, 3, 4, 5, 6, 7
g = Gasket Material: 0, A, B, C
h = Head/ Connect Orientation: 1, 2, 3
j = Electronic Housing Material and Entry Type: A, B, C, D, E, F, G, H
k = Output/ Protocol: H, D, F, P
l = Customer Interface Selections: 0, A, B, C, D, E, F, G, H, J
m = Application Software: 1, 2, 3, 4
n = Output Limit, Failsafe & Write Protect Settings: 1, 2, 3, 4, 5, 6
o = General Configuration: S, C
p = Accuracy and Calibration: A, B, C, D, E, F, G, H
q = Mounting Bracket: 0, 1, 2, 3, 4, 5, 6, 7
r = Customer Tag: 0, 1, 2
s = Conduit Plugs & Adapters: A0, A2, A6, A7, A8, A9
t = General Options: Any two digit numeric code, separated by comma
v = Factory Identification: AAAA to 9999 (Any four digit alphanumeric code) for internal factory use
STFa-bcdefg-hijk-A-lmn-opq-s-tvw-x-yyyy. ST700 and ST800 Flange Mounted Liquid Level
Transmitter
a = Span: 828, 840, 82F, 83F, 722, 740, 72F, 74F
b = Material of Construction: A, W, B, C, E, X, F, G, J, L, M, N, R, S, 1, 2, 3, 4, 5, 6
c = Fill Fluid: 1, 2, 3
d = Process Connection: A, C, H, K
e = Bolt Materials: C, S, N, B
f = Vent/ Drain Type/ Location: 1, 2, 3, 4, 5, 6
g = Gasket Material: A, B
h = Head/ Connect Orientation: 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F, Q, U, V, H, J, K, L, M, N, W, X, Y, S,
T, P, R
j = Gasket Ring: 0, F, C, D, E
k = Extension: 0, F, C, D, E
l = Electronic housing Material and Entry type: A, B, C, D, E, F, G, H
m = Output/ Protocol: H, D, F, P
n = Customer Interface Selections: 0, A, B, C, D, E, F, G, H, J
o = Application Software: 1, 2, 3, 4
p = Output limit, failsafe & Write Protect: 1, 2, 3, 4, 5, 6
q = General Configuration: S, C
s = Accuracy and Calibration: A, B, C, D, E, F, G, H
t = Mounting Bracket: 0, 1, 2, 3, 4, 5, 6, 7
v = Customer tag: 0, 1, 2
w = Conduit Plugs & Adapters: A0, A2, A6, A7, A8, A9,
x = General Options: Any two digit numeric code, separated by comma
y = Factory Identification: AAAA to 9999 (Any four digit alphanumeric code) for internal factory use
THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGE
FM Approvals Ltd. 1 Windsor Dials, Windsor, Berkshire, UK. SL4 1RS
T: +44 (0) 1753 750 000 F: +44 (0) 1753 868 700 E-mail: [email protected] www.fmapprovals.com
F ATEX 020 (May/12)
Page 3 of 5
SCHEDULE
to EC-Type Examination Certificate No. FM12ATEX0029X
STRa-bcd-ef0ghijkl-A-mnp-qrs-t-vwx-y-z. ST700 and ST800 Remote Seal Pressure Transmitter
a = Span: 82D, 83D, 840, 84G, 87G, 73D, 74G
b = Number of Seals: 1, 2, 3, 5
c = Fill Fluid: 1, 2
d = Construction: A, D, C
e = Secondary Fill: 0, 1, 2, 3, 4, 5
f = Connection of Remote Seal to Meter Body: 0, A, B, C, D, E, F, G, H, J, K, L, M, 2
g = Flush Flanged Seal: AFA, AFC, AFM, BCA, BCC, BGA, BGC, BDA, BDC, BFA, BFC, CAA, CCA,
CCC, CGA, CGC, CDA, CDC, DAA, DCA, DCC, DGA, DGC, DDA, DDC, DFA, DFC, EFA, EFC, EFM,
FGA, FGC, FGP, GFA, HMO, JJG, JKG, JLG, KJG, KKG, KLG, LJG, LKG, LLG, MD0, NE0, PF0, QG0,
RFK, RGK, RPK, RQK
h = Wetted Material: AA, AB, AC, AE, AF, BA, BB, BC, BE, BF, BG, BH, EA, EB, EC, GA, GB, GC, GE,
GG, HA, HB, HC, JA, JB, JC, JC, JD, JE, JF, JG, NA, RA, RB, RC, RD, SB, SC
i = Non-Wetted Material: 0, 1, 2, 4, 5, 7, 8, A, B, C
j = Bolts/ Capillary Connection: 0, 1, 2, C, D
k = Styles: 0, 2, 4, 6, 8, A, B, C, D, H, J, M, N, P, Q, R, S
l = Gasket Material: 0, G, H, J, K, L, M, N, P, Q, R, S, T
m = Electronic Housing Material and Entry Type: A, B, C, D, E, F, G, H
n = Output/ Protocol: H, D, F, P
p = Customer Interface Selections: 0, A, B, C, D, E, F, G, H, J
q = Application Software: 1, 2, 3, 4
r = Output Limit, Failsafe & Write Protect Settings: 1, 2, 3, 4, 5, 6
s = General Configurations: S, C
t = Accuracy and Calibration: A, B, C, D, E, F, G, H
v = Mounting Bracket: 0, 1, 2, 3, 4, 5, 6, 7
w = Customer Tag: 0, 1, 2
x = Conduit Plugs & Adapters: A0, A2, A6, A7, A8, A9
y = General Options: Any two digit numeric code, separated by comma
z = Factory Identification: AAAA to 9999 (Any four digit alphanumeric code) for internal factory use.
14
Special Conditions for Safe Use:
1. The painted surface of the equipment may store electrostatic charge and become a source of
ignition in applications with a low relative humidity <~30% relative humidity where the painted
surface is relatively free of surface contamination such as dirt, dust, or oil. Guidance on protection
against the risk of ignition due to electrostatic discharge can be found in EN TR50404 and IEC
TR60079-32 (in preparation). Cleaning of the painted surface should only be done with a damp
cloth.
2. The ambient temperature range, maximum process temperature and applicable temperature class
of the equipment is as follows;
T4 for -50°C < Ta < 85°C
T4 for -20°C < Ta < 70°C with display
Maximum process temperature = 125°C
3. Consult the manufacturer for dimensional information on the flameproof joints for repair.
4. The Transmitter can be installed in the boundary wall between an area of Category 1 and the less
hazardous area, Category 2. In this configuration, the process connection is installed in Category 1 while
the transmitter housing is installed in Category 2.
15
Essential Health and Safety Requirements:
The relevant EHSRs that have not been addressed by the standards listed in this certificate have been identified
and assessed in the confidential report identified in item 8.
THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGE
FM Approvals Ltd. 1 Windsor Dials, Windsor, Berkshire, UK. SL4 1RS
T: +44 (0) 1753 750 000 F: +44 (0) 1753 868 700 E-mail: [email protected] www.fmapprovals.com
F ATEX 020 (May/12)
Page 4 of 5
SCHEDULE
to EC-Type Examination Certificate No. FM12ATEX0029X
16
Test and Assessment Procedure and Conditions:
This EC-Type Examination Certificate is the result of testing of a sample of the product submitted, in
accordance with the provisions of the relevant specific standard(s), and assessment of supporting
documentation. It does not imply an assessment of the whole production.
Whilst this certificate may be used in support of a manufacturer’s claim for CE Marking, FM Approvals Ltd
accepts no responsibility for the compliance of the equipment against all applicable Directives in all
applications.
This Certificate has been issued in accordance with FM Approvals Ltd’s ATEX Certification Scheme.
17
Schedule Drawings
A list of the significant parts of the technical documentation is annexed to this certificate and a copy has
been kept by the Notified Body.
18
Certificate History
Details of the supplements to this certificate are described below:
Date
Description
11th June 2012
Original Issue.
16th August 2013
Supplement 1:
Report References: 3042224rev120920 dated 25th June 2013, 3042224rev121106
dated 26th June 2013, and 3042224rev130211 dated 2nd July 2013.
Description of the Change: Update Documentation, update documentation for the
addition of Foundation Fieldbus/Profibus Electronics and update of documentation for
the addition of ST800 Flange Mount, and also the addition of the ST700 Series.
THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGE
FM Approvals Ltd. 1 Windsor Dials, Windsor, Berkshire, UK. SL4 1RS
T: +44 (0) 1753 750 000 F: +44 (0) 1753 868 700 E-mail: [email protected] www.fmapprovals.com
F ATEX 020 (May/12)
Page 5 of 5
Blueprint Report
Honeywell International - Honeywell Field Solutions (1000000921)
Class No
3615
Original Project I.D.
3042224
Drawing No.
Revision Level
Drawing Title
Last Report
Electronic Drawing
30752785
22
“O” Ring (TAB 146 and TAB 130)
3042224
Yes (pdf)
30756916
2
Cup terminal, Wire Keeper
3042224
Yes (pdf)
50028178
B
Ground Clamp Transmitter
3042224
Yes (pdf)
50049827
B
Cap Machining
09/20/12
Yes (pdf)
50049829
B
Meter Cap Machining
09/20/12
Yes (pdf)
50049830
A
Tempered Glass
09/20/12
Yes (pdf)
50049831
A6
Retainer, Glass
3042224
Yes (pdf)
50049835
C
Adapter Machining
09/20/12
Yes (pdf)
50049903
A
Transmitter Housing Machining
09/20/12
Yes (pdf)
50049916
C
Serial Number Nameplate
09/20/12
Yes (pdf)
50059984
A
Cement, DOW Corning RTV- 734
3042224
Yes (pdf)
51196688
E
Pan Head Phillips/ Slotted
3042224
Yes (pdf)
51309673
D
Sensor Header Assembly
3042224
Yes (pdf)
51404837
F
Restrictor, S100, S900
3042224
Yes (pdf)
30353122
27
Plastic Caplug
3042224
Yes (pdf)
34-ST-25-35
1
ST 800 Pressure Transmitter User Manual
3042224
Yes (pdf)
50000682
C
Adapter 1/2 NPT Male to 3/4 NPT Female
3042224
Yes (pdf)
50021832
D
Plug, Pipe Headless Socket
3042224
Yes (pdf)
50049712
A
MOA, Meter Body AP, DP, GP, MUX & SMV
3042224
Yes (pdf)
50049713
C
Meter Body Assembly AP, DP, GP & SMV CFF
09/20/12
Yes (pdf)
50049716
A
Meter Body Assembly, LGP/LAP
3042224
Yes (pdf)
50049717
A3
50049717_A3.pdf
02/11/13
Yes (pdf)
50049719
A3
50049719_A3.pdf
02/11/13
Yes (pdf)
50049826
A
Short Cap Die Casting
09/20/12
Yes (pdf)
50049828
A
Meter Cap Die Casting
09/20/12
Yes (pdf)
50049840
A
Terminal Block Molding Pressure Hart / DE
3042224
Yes (pdf)
50049881
A3
Short Cap Stainless Steel Casting
3042224
Yes (pdf)
50049882
A3
End Cap Machinining, Stn Stl, Solid
3042224
Yes (pdf)
50049883
A3
End Cap Casting Stainless Steel, Meter
3042224
Yes (pdf)
50049884
A3
End cap Machining Stn Stl, Meter
3042224
Yes (pdf)
50049888
A
Agency Nameplate FM and CSA
09/20/12
Yes (pdf)
50049889
A
Agency Nameplate ATEX
09/20/12
Yes (pdf)
50049902
A
Transmitter Housing Aluminum Die Casting
09/20/12
Yes (pdf)
50049916
C
Top Nameplate Blank
09/20/12
Yes (pdf)
50049918
A1
Transmitter Housing Casting, Stn Stl, Pressure
3042224
Yes (pdf)
50049919
A1
Transmitter Housing Machining, Stn Stl, Pressure
3042224
Yes (pdf)
50064345
C
ST800 Series Pressure Transmitter for Explosion-proof/ Flameproof Certification for FM, ATEX and IECEx
02/11/13
Yes (pdf)
50064346
B
ST 6000 Agency Drawing
11/06/12
Yes (pdf)
50071726
A2
Top Nameplate Blank
3042224
Yes (pdf)
50077401
A1
50077401_A1.pdf
02/11/13
Yes (pdf)
50077521
A3
50077521_A3.pdf
02/11/13
Yes (pdf)
50077544
A2
50077544_A2.pdf
02/11/13
Yes (pdf)
Addendum 34-ST-25-35
1 June 2012
Addendum (to User's Manual 34-ST-25-35)
3042224
Yes (pdf)
S-12927-C
33
Date Coding & Serialization
3042224
Yes (pdf)
16/08/2013
Page 1 of 1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement