Air Conditioning Components and Equipments for Enclosures

Air Conditioning Components and Equipments for Enclosures
Air Conditioning Components and
Equipments for Enclosures
Cooling Units · Chillers · Heat Exchangers · Filterfans
Heaters · Thermostats · Hygrostats · Lamp Systems · Components for Enclosures
NEW!
!
W
E
N
Filterfan
Pfannenberg
Enclosure Air Conditioning
Your Air Conditioning Experts
NEW!
Safety for man, machine and the environment!
©
ELECTRO-TECHNOLOGY FOR INDUSTRY
Safety for man, machine and the environment!
©
Filterfan
I
f you are looking for competence, performance and flexibility,
Pfannenberg is the right partner. After all it was Pfannenberg who
invented the filterfan* almost fifty years ago and so was born
enclosure air conditioning. A pioneering achievement if you consider
the fact that cool, clean air ensures that electronics last longer,
thus protecting against the prohibitive cost of machine failure.
In this catalogue, Pfannberg introduces a brand-new, 4th Generation
of filterfans. Prepare to be amazed and excited by its new features!
Enjoy the benefits of our experience and core competence!
You will find the ideal solution for every application among
Pfannenberg’s diverse range of high-quality air-conditioning components, from spindle cooling to enclosure air conditioning. Our product
portfolio includes everything from our new patented 4th Generation
filterfans, to chillers, slimline compact cooling units for side, internal
and top-mounting, peltier cooling units and air/water heat exchangers
for central cooling systems, the corresponding controls and of course,
heaters for electronic enclosures.
We reserve the right to technical alterations.Subject to correction. 075000053
* European-Patent No. 0439667
2
ELECTRO-TECHNOLOGY FOR INDUSTRY
NEW!
Pfannenberg – Your Partner
for Service and
Product Validation
Quick-Finder
Subject:
pages:
Technical expertise
4-11/57/76-77
Programme overview - cooling units
12-13
Cooling units for side-mounting
Cooling units DTI and DTS + DTS (ATEX)
16-47
Technical data, characteristic curves, dimensions, installation cutouts
Cooling units in stainless steel
36
Cooling units in stainless steel
Optional extras for cooling units
37/52-53
Electronic control, condensate evaporator, accessories
Cooling units for top-mounting DTD
48-51
Technical data, characteristic curves, dimensions, installation cutouts
54-56
Peltier Cooling
Technical data, characteristic curves, dimensions, installation cutouts
Pfannenberg Chillers
Air / water heat exchangers
58-61
62-75
Technical data, characteristic curves, dimensions, installation cutouts
Programme overview - Filterfans
NEW!
... more information on the pages 136-138!
Filterfan line PF 4th Generation
78-79/94-95
78-93
Technical data, characteristic curves, protective systems,
dimensions, installation cutouts, exhaust filters PFA, EMC versions
Filterfan line PF 3rd Generation
94-114
Technical data, characteristic curves, protective systems,
dimensions, installation cutouts, exhaust filters PFA, EMC versions
We reserve the right to technical alterations.Subject to correction. 075000053
Filterfan line FLF
115
Technical data, dimensions, exhaust filters AFF
Top mounting filterfans line PTF
116-117
Technical data, characteristic curves, protective systems,
dimensions, installation cutouts, exhaust filters PTFA
NEW!
Thermal Management
119-126
Heaters, fan-forced heaters, thermostats, hygrostats
Enclosure Equipment
127-131
Lamp systems and connections, power sockets,
pressure compensation device, signal towers
Fundamental Theory of
Enclosure Air Conditioning
! Services
NEW
132-135
136-138
for product development and validation
www.pfannenberg.com
www.pfannenberg.de
3
Convincing Arguments!
Partnership for Success!
A number of leading companies – for example in the car industry or in
industrial engineering – rely on Pfannenberg for spindle cooling or for
air conditioning enclosures. Not only because efficiency and utility are
the core of our philosophy, but also because we adopt an individual
approach on the basis of partnership when working together with our
customers. This catalogue merely provides you with a summary of our
products and services. We therefore ask you to contact us if you’re
looking for something out of the ordinary or need a custom design.
Your problems and needs are a challenge for us.
We reserve the right to technical alterations.Subject to correction. 075000053
Just give us a call!
4
We reserve the right to technical alterations.Subject to correction. 075000053
ELECTRO-TECHNOLOGY FOR INDUSTRY
5
Functionality ensures the ultimate in availabi
economic reliability & efficiency!
One installation cutout for five levels of capacity
1510
You would like to achieve your goal with as little effort as possible:
A maximum guarantee against production failure, by air conditioning
your electronic control systems.
We do everything to help you in your endeavour: With energy-saving
equipment, rapid planning, simple installation and efficient service.
Enhanced performance!
At Pfannenberg, economic efficiency goes without saying. With pinpointed improvements in detail, we can enhance the performance of
our equipment considerably. The benefit to you is more value for your
money.
450
installation cutout
1000 W
1500 W
2000 W
2500 W
4000 W
with patented method of rapid installation
Availability
Equipment designed using the ultimate in modern methods and the
choice of proven components in cooling units provide you with a
high degree of availability and security when air conditioning your
enclosures.
Pfannenberg head warehouse in Hamburg
The sturdy control equipment inside the units ensures you of the
highest degree of security against electromagnetic influences, and
also against high-inductive stray fields.
Prompt planning and
easy installation
We have made it as easy as possible for you: One single template
accommodates all of the cooling units in a particular range, in this
example four models. You can cut out the panel on your enclosure
before your know the capacity you have to install. For installing our
patented Filterfans, simply press into place, “Click and Fit!”
There’s nothing faster than that!
6
patented mounting of filter fans
We reserve the right to technical alterations.Subject to correction. 075000053
Functionality
lity and
ELECTRO-TECHNOLOGY FOR INDUSTRY
Optimum air passage
Distribution of heat
inside the enclosure
danger of heat pockets
Using and encouraging natural convection to the fullest – that means
optimum air flow. Hot air is drawn off from the upper reaches of the
enclosure and cool air blown in at the bottom. This prevents hot spots
in a reliable manner. High clearance between air intake and air outlet
means: Optimum distribution of heat inside the enclosure.
High clearance between
air intake and air outlet
up to
up to
+ 55 °C
+ 55 °C
perfect planning
NEW!
The complete programme (see page 119 to 126) for your enclosure
equipment. Heaters, thermostats, hygrostats or lamp systems – useful
supplementings and additional control of filter fans, heat exchangers
and cooling units.
No matter what RAL colour you decide on ...
... our design allows you to adapt the unit to the
enclosure colour scheme. There is no need for
you to do any expensive painting yourself.
You only need to ask us to send you your personal computer programme
PSS (Pfannenberg Software Service) - or you can download the programme for free om www. pfannenberg.com - and you can find out
yourself, using a few keystrokes, what are the best components for
your air conditioning problem. Of course, we’ll be glad to help you, with
training programmes and seminars – even at your premises.
Just give us a call!
7
We reserve the right to technical alterations.Subject to correction. 075000053
Low clearance between
air intake and air outlet
Decision made easy:
High efficiency cooling units
G
When designing, make sure that the cold air is not deflected onto
open electronic pcbs. The cold air can lead to condensation on the
pcb.
G
Take care to ensure that the cold air has unimpeded passage on
its way out the cooling unit into the enclosure, as otherwise
the cold air cannot circulate throughout the enclosure.
G
Provide your enclosure with a door contact switch to prevent
the cooling unit from trying to dehumidify the production bay
when the door is left open. This would lead to extreme levels of
condensation inside the enclosure.
G
Whenever the cooling unit is in operation, make sure the cover is
fitted correctly. The condenser in the cold air circuit would otherwise
not be provided with sufficient air and thus be unable to release
energy. This would cause the pressure safety cut out to operate.
G
The standard scope of supply for Pfannenberg cooling units includes two all-resistant connecting cables or ready-to-connect
plugs for mains voltage and fault contact. Use the connector to
detect faults at an early stage. In accordance with car industry
specifications, the cable cross section measures 1.5 mm2.
!
8
… especially for side-mounted units
G
On three-phase versions of the cooling unit, make sure the rotary
field turns in the proper direction.
In general, the rotary field turns clockwise.
The DTS 7301 cooling unit, for example, is only available in a
three-phase version, which is equipped with a rotary piston compressor.
This must be connected to a right rotary field!
G
In very humid ambient conditions, large amounts of condensation
may accumulate; this drain off through a 12 mm overflow pipe.
A length of hose can be attached to enable the disposal of the
water.
… especially for top-mounted units
G
On three-phase versions of the cooling unit, make sure the rotary
field turns in the proper direction.
In general, the rotary field turns clockwise.
Although during intermittent operation none of the components is
adversely affected, the blade on the fans are of aerodynamic design
and thus only attain a fraction of their nominal air performance.
For this reason, the pressure safety cut out is activated after only a
short period of operation.
G
In very humid ambient conditions, large amounts of condensation
may accumulate; they drain off through a 12mm overflow pipe, to
which you can attach a length of hose to prevent water from
accumulating on the top of the enclosure.
When attaching the hose, please make sure that there are no kinks
and the flow is unimpeded (vertical).
We reserve the right to technical alterations.Subject to correction. 075000053
Please observe the following points during
planning and / or installation:
ELECTRO-TECHNOLOGY FOR INDUSTRY
Invest in safety, reliability, economic efficiency and profitability!
G
G
G
G
G
Perfectly designed air conditioning equipment for enclosures guarantees a
high degree of safe operation and long service life to ensure that your
switch gear runs at its optimum efficiency. Our line of products ranges from
thermostats to Filterfans® and water-cooling systems. This range provides
the complete solution for all your applications.
During the product development and manufacturing stages, it goes without saying that we apply the current standards and regulations, such as
directives on machinery, electromagnetic compatibility and low voltage
equipment.
For technical data, there are not always distinct standards to use as a yardstick for product comparison. We have taken it upon ourselves to provide
data tailored to everyday use that can be reproduced.
Our UL-approved products have been specially designed for the North
American market. This means that our customers find it much easier to
gain access to this interesting market.
An UL-approval is an absolute must for the American car industry. You can
find an overview on the pages 12/13.
Most of Pfannenberg’s products do already conform to RoHS, even if
the Pfannenberg products are not affected by the legislation.
If you do need detailed informations, please use the following e-mail
address: [email protected]
We reserve the right to technical alterations.Subject to correction. 075000053
And talking
of the environment!
Environmental protection is important. That is why ozone-friendly
refrigerant (R134a), together with the return and proper disposal
of out-of-service units are a matter of fact at Pfannenberg.
No. 12 100/104 19658 TMS
9
A Passion for Innovatio
new Filte
Dear business partners,
At the same time it provides
a longer service life for the
with the invention of the filterfan by Otto Pfannenberg in 1958, the
filter mat and therefore
company Pfannenberg had set a milestone in industrial climatisation.
lengthened service intervals.
By this, it is possible to save time, money and increase at the same
In cooperation with switchgear
cabinet and machinery
have also been subject to a technical upgrading. Whilst the filter mat
manufacturers operating
of the series 150g had the filtration efficiency G2, the new filter mats
in different market segments,
we have created the
4th
time the performance and availability of your plant. Our IP 54 versions
Generation of the Pfannenberg filterfan and
sizes 11,000 to 43,000 now achieve G3 and those of 65,000 to 67,000
even achieve G4.
thus made an important step towards a new world standard.
This newly developed filterfan is even more servicefriendly due to its
companies in the world
modular structure. The air-flow optimised design with its patented
which develops and
louvre, 4-corner fastening system and patented filter mat has an air
manufactures the whole
flow figure increased by more than 100 % for the protection type
range of industrial climatisation
IP 55, compared to the
products such as thermostats, heaters, filterfans, cooling units and
filterfans of the previous
chillers. Thus, we supply everything “from one hand”. Together with
generation.
our distributors and subsidiaries we are your qualified, competent and
flexible partners.
Andreas Pfannenberg
Managing Director
P.S. We are specialists in thinking ahead. This is demonstrated by 47 product patents applied for in the past 3 years. This is made possible by
the fact 8% of the annual turnover is invested in research and development and 49% of the products which contribute to the worldwide turnover
are younger than 5 years old.
10
We reserve the right to technical alterations.Subject to correction. 075000053
Pfannenberg is one of the few
on …
rfans - 4th Generation
ELECTRO-TECHNOLOGY FOR INDUSTRY
THE innovation on the filterfan market
With the innovative 4th Generation of filterfans, Pfannenberg offers you
real competitive advantages. The development of the new generation
includes of course all national and international norms and standards e.g.
TÜV, NEMA, UL and GOST. In addition, there are the classical attributes
of the Pfannenberg filterfans such as flat modern industrial design and
easy assembly without the need for tools due to the patented 4-corner
fastening system (“Click and fit!”). Easy maintenance is also achieved.
Ten applied for patent innovations and registered designs assure that
the new 4th Generation filterfans are unique.
5 sizes, 8 performance classes IP 54 and 7 performance classes IP 55
More than 1,000 tests in our
modern test laboratory led
to the air-flow optimised
design with an increased
air performance.
The 4th filterfan generation of
Pfannenberg
Modern test laboratory
The filter mat used (patent) assures a longer service life and
thus increased service intervals. It saves both time and money
cross-section
For climatisation, a minimum airflow volume is required. The airflow
volume is decreasing when the dust contamination of the filter
increases.
Contrary to the existing filterfan systems, the new
Pfannenberg solution does not provide any reduction
of the air flow but by means of a new patented
filterfan technology a significant increase in the
IP 55 protection.
Detailed product informations starting from page 76.
11
We reserve the right to technical alterations.Subject to correction. 075000053
An increase of airflow by more than 100% at the protection rating
IP 55 is made possible by using the newly developed filter mat,
designed especially for the most demanding ambient conditions
such as dust, paper and cardboard fibres, oil mist, etc.
All you need to know at a glance...
Cooling units for side- and door-mounting
Partially recessed
Cooling capacity (A35 / A35)*
Model
Rated voltage
Height
Width
Depth (inside + outside)
UL version
Page
4000 Watt
DTI 9841
400V
1539 mm
485 mm
360 mm
yes
16–17
2500 Watt
DTI 9541
400V
1536 mm
485 mm
240 mm
yes
16–17
2000 Watt
DTI 9441
400V
1536 mm
485 mm
240 mm
yes
16–17
1500 Watt
DTI 9341
230V / 400V
1536 mm
485 mm
180 mm
yes
16–17
1000 Watt
DTI 9241
230V / 400V
1536 mm
485 mm
180 mm
yes
16–17
Model
Rated voltage
Height
Width
Depth (inside + outside)
UL version
Page
DTI 9341C
230 V
958 mm
410 mm
248 mm
yes
20–21
Cooling capacity (A35 / A35)*
1500 Watt
950 Watt
DTI 9141
115 V / 230 V / 400 V
958 mm
410 mm
248 mm
yes
20–21
870 Watt
DTI 9041
115 V / 230 V / 400 V
599 mm
380 mm
231 mm / 231 mm / 363 mm
yes
22–23
510 Watt
DTI 9031
115V / 230V / 400V
562 mm
310 mm
212 mm / 212 mm / 353 mm
yes
22–23
Model
Rated voltage
Height
Width
Depth (inside + outside)
UL version
Page
320 Watt
DTFI 9021
115V / 230V / 400V**
326 mm
385 mm
252 mm
yes
24–25
320 Watt
DTI 9021
115V / 230V / 400V**
329 mm
385 mm
252 mm
yes
24–25
Cooling capacity (A35 / A35)*
External mounting
Cooling capacity (A35 / A35)*
Model
Rated voltage
Height
Width
Depth
UL version
Page
4000 Watt
DTS 9841
400 V
1549 mm
485 mm
360 mm
yes
18–19
2500 Watt
DTS 9541
400V
1543 mm
485 mm
240 mm
yes
18–19
2000 Watt
DTS 9441
400V
1543 mm
485 mm
240 mm
yes
18–19
1500 Watt
DTS 9341
230V / 400V
1539 mm
485 mm
180 mm
yes
18–19
1000 Watt
DTS 9241
230V / 400V
1539 mm
485 mm
180 mm
yes
18–19
Model
Rated voltage
Height
Width
Depth
UL version
Page
20–21
Cooling capacity (A35 / A35)*
1500 Watt
DTS 9341C
230 V
964 mm
410 mm
248 mm
yes
950 Watt
DTS 9141
115V / 230V / 400V
964 mm
410 mm
248 mm
yes
20–21
870 Watt
DTS 9041
115V / 230V / 400V
604 mm
380 mm
231 mm / 231 mm / 363 mm
yes
22–23
510 Watt
DTS 9031
115V / 230V / 400V
565 mm
310 mm
212 mm / 212 mm / 353 mm
yes
22–23
All units of the 9000-series (except DTx 9031) are available with integrated condensate evaporation (CM)
Cooling units for side- and door-mounting
Model
Rated voltage
Height
Width
Depth
UL version
Page
2500 Watt
DTS 7541
400V
1350 mm
397 mm
270 mm
yes
38–39
2000 Watt
DTS 7441
400V
1350 mm
397 mm
270 mm
yes
1500 Watt
DTS 7341
400V
1350 mm
390 mm
200 mm
1400 Watt
DTS 7341
115V / 230V
1350 mm
390 mm
200 mm
yes
38–39
1100 Watt
DTS 7241
115V / 230V
1350 mm
390 mm
200 mm
yes
38–39
38–39
38–39
800 Watt
DTS 7141
230V
1390 mm
390 mm
200 mm
38–39
1400 Watt
DTS 7301
230V / 400V
1350 mm
390 mm
140 mm
40–41
1100 Watt
DTS 7201
230V
1350 mm
390 mm
140 mm
820 Watt
DTS 7101
115V / 230V
915 mm
390 mm
200 mm
DTS 7001
230V
580 mm
340 mm
210 mm
470 Watt
42–43
42–43
DTS 7001
115V
580 mm
340 mm
210 mm
yes
42–43
320 Watt
DTS 7061
115V / 230V
445 mm
315 mm
255 mm
yes
44–45
220 Watt
DTS 7041
115V / 230V
330 mm
375 mm
190 mm
yes
44–45
Height
1804 mm
1804 mm
1804 mm
1804 mm
Width
474,5 mm
474,5 mm
474,5 mm
474,5 mm
Cooling units for potentially explosive environments (Ex)
Cooling capacity (A35 / A35)*
Model
Rated voltage
3500 Watt
3000 Watt
2500 Watt
1400 Watt
N E W ! DTS-Ex7741
N E W ! DTS-Ex7641
DTS-Ex7541
DTS-Ex7341
400 V
400 V
230V / 400 V
230V / 400 V
* in accordance with EN 814: at 35 °C ambient temperature and 35 °C temperature inside enclosure, ** dimension differing
12
40–41
yes
Depth
452 mm
452 mm
452 mm
452 mm
Approval
TÜV 04 ATEX 2484U
TÜV 04 ATEX 2484U
TÜV 04 ATEX 2484U
TÜV 04 ATEX 2484U
Page
46–47
46–47
46–47
46-47
We reserve the right to technical alterations.Subject to correction. 075000053
Cooling capacity (A35 / A35)*
ELECTRO-TECHNOLOGY FOR INDUSTRY
Outdoor series
Cooling capacity (A35 / A35)*
NEW!
5500 Watt
NEW!
4000 Watt
NEW!
2800 Watt
2000 Watt
1100 Watt
Model
DTS 3661, 3681
DTS 3561, 3581
DTS 3361, 3381
DTS 3261, 3281
DTS 3161, 3181
Rated voltage
400V / 460V
400V / 460V
400V / 460V
115V / 230V / 400V
115V / 230V / 400V
Height
1667 mm
1502 mm
1502 mm
1209 mm
748 mm
Width
483 mm
483 mm
403 mm
395 mm
395 mm
Depth
623 mm
534 mm
468 mm
326 mm
294 mm
UL version
yes
yes
yes
yes
yes
Page
26–27
28–29
30–31
32–33
34–35
Model
Rated voltage
Height
DTD 5501
400V / 440V
465 mm
DTD 5301
400V / 440V
400 mm
DTD 5301
230V
400 mm
DTD 5301
115V
400 mm
DTD 5201
230V
400 mm
1150 Watt
DTD 5201
115V
400 mm
DTD 5101
230V
400 mm
810 Watt
DTD 5101
115V
400 mm
* in accordance with EN 814: at 35 °C ambient temperature and 35 °C temperature inside enclosure
Width
720 mm
600 mm
600 mm
600 mm
600 mm
600 mm
600 mm
600 mm
Depth
465 mm
390 mm
390 mm
390 mm
390 mm
390 mm
390 mm
390 mm
UL version
yes
yes
yes
yes
Page
48–49
50–51
50–51
50–51
50–51
50–51
50–51
50–51
Enclosure cooling units for top-mounting
Cooling capacity (A35 / A35)*
3000 Watt
1700 Watt
1600 Watt
1400 Watt
yes
yes
yes
Accessories for Cooling units
External condensate evaporation KV DTX *
52
Condensate bottle KF DTX
Filter mats, attachment and aluminium filters, protective edging
53
53
* all units of the 9000-series (except DTx 9031) are available with integrated condensate evaporation (CM)
Peltier cooling units
PTM
100 - 500 Watt
55–56
Chiller
Air / Water heat exchangers for side-mounting
Cooling capacity (W10 / A35)*
Model
Rated voltage
60-61
Height
Width
Depth
UL version Housing stainless steel 1)
Page
We reserve the right to technical alterations.Subject to correction. 075000053
This standard series includes the following features • integrated solenoid valve • integrated thermostat • plug-in connection on attached connector • fault contact for 10 K overtemperature
10000 Watt
PWS 71002
400 V
1800 mm
600 mm
450 mm
62-63
7000 Watt
PWS 7702
400 V
1800 mm
450 mm
300 mm
62-63
PWS 7502
115 V / 230V
1400 mm
460 mm
235 mm
yes
yes
64–65
5000 Watt**
PWS 7332
115 V / 230V
950 mm
400 mm
190 mm
yes
yes
66-67
3000 Watt**
3000 Watt
PWS 7332 L
115 V / 230V
1350 mm
400 mm
190 mm
66-67
1500 Watt
PWS 7152
115 V / 230V
950 mm
400 mm
115 mm
yes
yes
66-67
1000 Watt
PWS 7102
115 V / 230V
500 mm
200 mm
150 mm
yes
yes
68-69
650 Watt
PWS 7062
115 V / 230V
500 mm
200 mm
100 mm
yes
yes
68-69
This standard series includes the following features: • extremely long air passage • cable connection • designed as a circulating cooler
3550 Watt
PWS 7602
230V
860 mm
560 mm
140 mm
72-73
3400 Watt
PWS 7402
230V / 400-480 V
1350 mm
390 mm
180 mm
- / yes
yes
72-73
2100 Watt
PWS 7302
230V
1350 mm
390 mm
140 mm
72-73
1250 Watt
PWS 7002
230V
587 mm
390 mm
114 mm
72-73
These specially adapted versions include the following features: • integrated solenoid valve • integrated thermostat • connection by means of an IEC connector
3400 Watt
PWS 7412
230V
1350 mm
390 mm
180 mm
75
3550 Watt
PWS 7612
230V
860 mm
560 mm
140 mm
75
2100 Watt
PWS 7312
230V
1350 mm
390 mm
140 mm
yes
75
1250 Watt
PWS 7012
230V
587 mm
390 mm
114 mm
75
Air / Water heat exchangers for top-mounting
3400 Watt
PWD 5402
230V / 400-480 V
190 mm
720 mm
2150 Watt
PWD 5302
230V
140 mm
600 mm
PWD 5412
230V
285 mm
720 mm
3400 Watt***
PWD 5312
230V
140 mm
600 mm
2150 Watt***
W
=
°C
water
supply
temperature,
A
=
°C
temperature
inside
enclosure
pipework
stainless
steel
(optional)
**
**
465 mm
- / yes
390 mm
465 mm
390 mm
*** pipework 1.4571 complete
yes
1)
70–71
70–71
75
75
optional extra
13
The exceptional range of products for enclosure air conditioning.
Cooling units for partially recessed installation and external mounting.
Flexibility for any enclosure
A=B=C=D
Easy to plan
450
You choose the type of installation:
G DTI or DTS (partially recessed or external mounting) cooling units
G cost savings due to standardised mechanisms
installation cutout
G subsequent change of capacity level possible
G suitable for multiple voltages
G one installation cutout for five levels of capacity (DTI/DTS 9241 to 9841)
Optimum cooling effect
100
mm
SC
1000 W
1500 W
2000 W
warm air
intake
air intake and outlet)
G high-capacity air volume
G the cool air flows downwards
G high degree of availability
only
100 mm
Enclosure
components
Optimum use of enclosure space
Safety and service
ambient air
intake
cold air
outlet
200mm
min.
The new cooling unit electronics maximise the requirement of your machine
and systems, ensuring ultimate reliability, even under the most extreme
conditions, as the electronics are located inside the passage of cool air.
This design enables you to service your equipment both simply and quickly
(see page 37).
Optional extras for enhanced safety and convenience
CC
MC
V2A
14
4000 W
ambient air
outlet
G effective, extremely long air passage
G no hot spots (due to extremely long clearance between
The optimum passage of cold air in a downward flow makes it possible for a
mere 100mm clearance between electronic components and cooling unit.
2500 W
The Pfannenberg Comfort Controller combines the benefits of the
standard controller (SC) with the added advantages of features such
as a multimaster interface (see page 37). Basis for integration into bus
systems for telemonitoring and remote diagnosis from control room.
The Pfannenberg Multi-Controller features a control unit equipped
with temperature display, a second, separate temperature probe,
and an optical interface. More information available on page 37.
All cooling units are available in stainless steel, especially
designed for applications in which hygiene and corrosion
protection are of paramount importance (see page 36).
We reserve the right to technical alterations.Subject to correction. 075000053
External mounting
DTS
1510
Partially recessed
DTI
Regardless of whether the partially recessed model is for internal
installation or external mounting, we provide the cooling capacity you
need for any size of enclosure.
ELECTRO-TECHNOLOGY FOR INDUSTRY
Integrated Cooling System©:
The new ICS line of cooling units with the DTI 9x41 range set new
industrial standards.
The efficient, technical solution:
single
handed
installation
=
2 minutes
The partially recessed DTI 9x41 cooling units for smart and efficient installation.
The patented method of rapid fixing – without tools.
1
2
3
5
6
4
Time-saving
Integrated seals and plug-in connectors are just two of the features to help you install quickly, saving time and money.
Don’t just take our word for it! See our video demonstration on the web.
Follow the „Single-handed installation = 2 minutes“ at http://www.pfannenberg.com to see how you can save time and money.
CM
DTc
For years now, all Pfannenberg cooling devices that are used in telecommunications or in the USA have been fitted with an
integrated evaporation device. Experience shows that integrated an evaporation device ensures maximum safety, as no condensation can drip onto the floor. Furthermore, the use of an integrating evaporation system rather than a conventional tank saves
time, and therefore costs. From now on, all cooling devices from the DTx 9000 series (with the exception of the DTx 9031, due to
its compact construction) are available with the new integrated, self-adjusting evaporation device.
The complete design integration
The design of the Pfannenberg cooling units is consciously designed in such a way that the machine
and/or plant is in the center of attention and not the cooling unit.
To help you determine 100% the appearance of your machine and/or plant Pfannenberg allows you to use your own cover by
offering you the series DTI 9000 (DTI 9241, 9341, 9441, 9541 and 9841) without the cover and display unit. The only condition is the
spatial requirement within the machine and/or plant for the cooling unit to achieve its full capacity.
Copyright Bystronic
15
We reserve the right to technical alterations.Subject to correction. 075000053
Integrated, self-adjusting condensate evaporation
No tools
required for installing
the exceptional DTI range:
see page 15
DTI 9x41 cooling units for partially recessed door- or
side-mounting: 4000, 2500, 2000, 1500 or 1000 W
Economic, state-of-the-art cooling units
G five levels of capacity in one single installation cutout
G extremely variable to suit required capacity
G all components reliably cooled using extremely long air passage
G no tools required, single-handed installation in 2 minutes
G no need to drill, enclosure seal installed at the factory
G fault and door contacts as standard electronics
G design integration possible by using of a DTc variant
G DTI 9441/9541/9841 are available with special voltage:
380 V / 400 V / 440 V / 460 V / 480 V
G optional with integrated condensate evaporation
A=B=C=D
DTc
Max. clearance
between air inlet
and outlet
Cutout
compatibility
SC
Eyebolts
installation
CC
Standard Controller
MC
Comfort Controller
(optional extra)
Multi Controller
(optional extra)
Suitable for both
50 Hz and 60 Hz
Partially recessed
installation
V2A
IP 54
CM
Integrated condenLevel of protection
in respect of enclosure sate evaporation
(EN 60529)
(optional extra)
Optional extra
Refrigeration data
DTI 9841
DTI 9541
DTI 9441
DTI 9341
DTI 9241
Cooling capacity at A35/A351)
4000 W
2500 W
2000 W
1500 W
1000 W
Cooling capacity at A50/A351)
3050 W
1800 W
1440 W
1200 W
780 W
500 g
500 g
Type of refrigerant
R134a
Amount of refrigerant
2100 g
Thermostat setting
1000 g
1000 g
adjustable within a range of + 25°C (+ 77 °F) to 45 °C (+ 113 °F), factory-set at 35 °C (+ 95 °F)
Ambient air temperature
+ 15°C (+ 59 °F) … + 55 °C (+ 131 °F)
Air volume 2), external circuit
1400 m3/h
1200 m3/h
1200 m3/h
890 m3/h
890 m3/h
Air volume 2), internal circuit
1670 m3/h
890 m3/h
830 m3/h
890 m3/h
890 m3/h
Condensate discharge
condensate drain
2) free-flow
Electrical data
DTI 9841
DTI 9541
DTI 9441
Rated voltage
400 V 3~*
400 V 3~*
400 V 3~*
Voltage range
Power consumption at A35/A35
50 Hz
60 Hz
380 V … 480 V
50 Hz
60 Hz
380 V … 480 V
50 Hz
DTI 9341
60 Hz
50 Hz
60 Hz
380 V … 480 V
1891 W 2336 W 1140 W 1450 W
DTI 9241
400 V 2~**
230 V
50 Hz
400 V 2~**
230 V
60 Hz
50 Hz
60 Hz
DIN IEC 60038
50 Hz
60 Hz
DIN IEC 60038
880 W
1250 W
800 W
1040 W
840 W
1080 W
740 W
910 W
780 W
960 W
Current consumption at A35/A35
4,2 A
3,6 A
3,5 A
3,9 A
3,2 A
3,7 A
5,1 A
6,1 A
3,0 A
3,6 A
3,7 A
4,4 A
2,2 A
2,6 A
Starting current at A35/A35
28,3 A
25,2 A
10,9 A
11,8 A
10,5 A
11,2 A
21,4 A
19,9 A
12,9 A
12,0 A
11,5 A
18,5 A
6,9 A
11,1 A
Type of connection
plug-in connector
* Rated voltage can be adjusted on the device within a range of 380–420 V (50Hz) and 440–480 V (60Hz)
** Rated voltage can be set on the device at 400, 440 and 460 V
Supplementary data
DTI 9841
DTI 9541
DTI 9441
Weight (without packaging)
86 kg
67 kg
67 kg
Orientation
DTI 9341
50 kg
DTI 9241
55 kg
50 kg
vertical, for door- or side-mounting
Unit construction (chassis)
galvanized steel
Corrosion protection (cover)
galvanized/electrostatically powder-coated (200°C); on request: stainless steel cover
Colour
RAL 7032 (european grey) + RAL 7035 (light grey), other colours available on request
Insulation
Climatic data
System of protection
Standard scope of supply
Approvals
16
according to EN 60529
max. ambient temperature +55°C
max. relative humidity 80%, A35/A 35 (EN 814)
IP 54 against the enclosure (EN 60529), when used as recommended
IP 34 against the ambience (EN 60529), when used as recommended
operating instructions, technical datasheet, installation kit incl. plug-in connector, eyebolts at DTI 9841
see overview cooling units / approvals
55kg
We reserve the right to technical alterations.Subject to correction. 075000053
1) Refrigeration capacity according to EN 814
Rated frequency
Design integration
(see page 15)
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
DTI
Characteristic curves: DTI 9841, DTI 9541, DTI 9441, DTI 9341, DTI 9241
– Effective refrigeration capacity
DTI 9541 temperature inside
refrigeration
DTI PFA
C1
C1
C2
C2
refrigeration
capacity Q0 (Watt)
DTI 9841
3500
6000
3000
5000
2500
2000
+45°C
3000
+45°C
+35°C
1500
+35°C
2000
+25°C
1000
+25°C
4000
500
A1
1000
A1
enclosure Ti
capacity Q0 (Watt)
temperature inside
enclosure Ti
25
35
45
55 Ta (°C)
25
35
ambient air temperature
refrigeration
capacity Q0 (Watt)
DTI 9441
temperature inside
enclosure Ti
3500
refrigeration
capacity Q0 (Watt)
3000
3000
2500
2500
+45°C
1500
B2
55 Ta (°C)
DTI 9341
temperature inside
enclosure Ti
3500
2000
DTI / DTI PFA
45
ambient air temperature
+35°C
1000
+25°C
500
2000
1500
+45°C
1000
+35°C
+25°C
C1
C2
500
25
35
45
25
55 Ta (°C)
35
45
ambient air temperature
refrigeration
capacity Q0 (Watt)
B1
55 Ta (°C)
ambient air temperature
DTI 9241
temperature inside
enclosure Ti
3500
Installation cutout:
3000
182
warm air
inlet
2500
2000
device contour
(cover)
+45°C
500
+35°C
+25°C
1366,5
1510 +2
–2
1536
25
322
DTI 9241/9341
DTI 9441/9541
DTI
DTI
DTI PFA
55 Ta (°C)
DTI 9841
DTI PFA
A1
1536
1536
1539
485
485
485
B2
15,5
45
B1
C1
340
450 +2
–2
485
35
ambient air temperature
185
cold air
outlet
72,5
17,5
1000
We reserve the right to technical alterations.Subject to correction. 075000053
1500
cutout
C2
444
180
444
210
60
240
443
270
120
360
120
* PFA – standard filter in Pfannenberg PFA range
17
DTS 9x41 cooling units for external door- or
side-mounting: 4000, 2500, 2000, 1500 or 1000 W
Cutout compatible to
Air/Water Heat Exchanger
PWS 7332-L
see page 66
Economic, state-of-the-art cooling units
G five levels of capacity in one single installation cutout
G extremely variable to suit required cooling capacity
G all components reliably cooled using extremely long
air passage
G fault and door contacts as standard electronics
G DTS 9441/9541/9841 are available with special voltage:
380 V / 400 V / 440 V / 460 V / 480 V
G optional with integrated condensate evaporation
A=B=C=D
CM
Max. clearance
between air inlet
and outlet
Cutout
compatibility
SC
CC
Standard Controller
Refrigeration data
Eyebolts
installation
Suitable for both
50 Hz and 60 Hz
MC
Comfort Controller
(optional extra)
V2A
Multi Controller
(optional extra)
Integrated condensate evaporation
(optional extra)
Side-mounted
installation
IP 54
Optional extra
Level of protection
in respect of enclosure
(EN 60529)
DTS 9841
DTS 9541
DTS 9441
DTS 9341
DTS 9241
Cooling capacity at A35/A351)
4000 W
2500 W
2000 W
1500 W
1000 W
Cooling capacity at A50/A351)
3050 W
1800 W
1440 W
1200 W
780 W
500 g
500 g
Type of refrigerant
R134a
Amount of refrigerant
2100 g
Thermostat setting
1000 g
1000 g
adjustable within a range of + 25°C (+ 77 °F) to 45 °C (+ 113 °F), factory-set at 35 °C (+ 95 °F)
Ambient air temperature
+ 15°C (+ 59 °F) … + 55 °C (+ 131 °F)
Air volume 2), external circuit
1400 m3/h
1200 m3/h
1200 m3/h
890 m3/h
890 m3/h
Air volume 2), internal circuit
1670 m3/h
890 m3/h
830 m3/h
890 m3/h
890 m3/h
Condensate discharge
condensate drain
2) free-flow
Electrical data
DTS 9841
DTS 9541
DTS 9441
Rated voltage
400 V 3~*
400 V 3~*
400 V 3~*
Rated frequency
Voltage range
Power consumption at A35/A35
50 Hz
60 Hz
380 V … 480 V
50 Hz
60 Hz
380 V … 480 V
50 Hz
DTS 9341
60 Hz
50 Hz
60 Hz
380 V … 480 V
1891 W 2336 W 1140 W 1450 W
DTS 9241
400 V 2~**
230 V
50 Hz
400 V 2~**
230 V
60 Hz
50 Hz
60 Hz
DIN IEC 60038
50 Hz
60 Hz
DIN IEC 60038
880 W
1250 W
800 W
1040 W
840 W
1080 W
740 W
910 W
780 W
960 W
Current consumption at A35/A35
4,2 A
3,6 A
3,5 A
3,9 A
3,2 A
3,7 A
5,1 A
6,1 A
3,0 A
3,6 A
3,7 A
4,4 A
2,2 A
2,6 A
Starting current at A35/A35
28,3 A
25,2 A
10,9 A
11,8 A
10,5 A
11,2 A
21,4 A
19,9 A
12,9 A
12,0 A
11,5 A
18,5 A
6,9 A
11,1 A
Type of connection
plug-in connector
* Rated voltage can be adjusted on the device within a range of 380–420 V (50Hz) and 440–480 V (60Hz)
** Rated voltage can be set on the device at 400, 440 and 460 V
Supplementary data
DTS 9841
DTS 9541
DTS 9441
Weight (without packaging)
86 kg
71 kg
71 kg
Orientation
DTS 9341
51 kg
DTS 9241
56 kg
51 kg
vertical, for door- or side-mounting
Unit construction (chassis)
galvanized steel
Corrosion protection (cover)
galvanized/electrostatically powder-coated (200°C); on request: stainless steel cover
Colour
RAL 7032 (european grey) + RAL 7035 (light grey), other colours available on request
Insulation
Climatic data
System of protection
Standard scope of supply
Approvals
18
according to EN 60529
max. ambient temperature +55°C
max. relative humidity 80%, A35/A 35 (EN 814)
IP 54 against the enclosure (EN 60529), when used as recommended
IP 34 against the ambience (EN 60529), when used as recommended
operating instructions, technical datasheet, installation kit incl. plug-in connector, eyebolts at DTS 9841
see overview cooling units / approvals
56 kg
We reserve the right to technical alterations.Subject to correction. 075000053
1) Refrigeration capacity according to EN 814
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
DTS
DTS PFA
C1
Characteristic curves: DTS 9841, DTS 9541, DTS 9441, DTS 9341, DTS 9241
– Effective refrigeration capacity
DTS 9541 temperature inside
refrigeration
C1
refrigeration
capacity Q0 (Watt)
DTS 9841 temperature inside
enclosure Ti
3000
5000
2500
2000
+45°C
3000
+45°C
+35°C
1500
+35°C
2000
+25°C
1000
+25°C
500
1000
A1
enclosure Ti
3500
6000
4000
A1
capacity Q0 (Watt)
25
35
45
25
55 Ta (°C)
35
45
ambient air temperature
refrigeration
capacity Q0 (Watt)
DTS 9441 temperature inside
enclosure Ti
DTS / DTS PFA
3500
3000
3000
2500
2500
+45°C
1500
+35°C
C1
1000
+25°C
DTS 9341 temperature inside
enclosure Ti
2000
1500
+45°C
1000
+35°C
+25°C
500
500
25
35
45
25
55 Ta (°C)
35
45
ambient air temperature
B1
55 Ta (°C)
ambient air temperature
refrigeration
capacity Q0 (Watt)
Installation cutout:
DTS 9241
temperature inside
enclosure Ti
3500
350
315
182
warm air
inlet
refrigeration
capacity Q0 (Watt)
3500
2000
55 Ta (°C)
ambient air temperature
3000
2500
2000
cutouts
0
800
R2
+45°C
500
+35°C
+25°C
25
35
45
55 Ta (°C)
ambient air temperature
290
242
58
322
220
185
560
cold air
outlet
1000
We reserve the right to technical alterations.Subject to correction. 075000053
device
contour
(cover)
1250
1366,5
A1
700
8x Ø 8
1500
DTS 9241/9341
DTS 9441/9541
DTS
DTS
A1
1539
B1
67,5
72,5
350
340
485
C1
DTS PFA
1543
485
180
1549
485
210
240
DTS 9841
DTS PFA
485
270
360
* PFA – standard filter in Pfannenberg PFA range
19
Cooling units for door- and side-mounting DTI / DTS 9141
and DTI / DTS 9341C for partially recessed or external
mounting: 950 and 1500 W
G
G
G
G
G
G
G
G
No tools
required for installing
the exceptional DTI range
see page 15
easy to install: no drilling (DTI range) or fitting enclosure seal
suitable for door widths of 500 mm or more
optimum long air passage in internal circuit
fault and door contacts as standard electronics
extremely good air circulation inside enclosure
rapid fixing
cutout compatible
optional with integrated condensate evaporation
CM
Max. clearance
between air inlet
and outlet
Eyebolts
installation
SC
V2A
Optional extra
Refrigeration data
Standard Controller
Suitable for both
50 Hz and 60 Hz
Partially recessed
installation
(DTI 9141)
CC
MC
Comfort Controller
(optional extra)
Integrated condensate evaporation
(optional extra)
Side-mounted
installation
(DTS 9141)
IP 54
Level of protection
in respect of enclosure
(EN 60529)
Multi Controller
(optional extra)
DTI / DTS 9141
DTI / DTS 9341C
Cooling capacity at A35/A351)
950 W
950 W
1500 W
1550 W
Cooling capacity at A50/A351)
520 W
473 W
754 W
758 W
Type of refrigerant
R134a
Amount of refrigerant
400 g
Thermostat setting
adjustable within a range of + 25°C (+ 77 °F) to 45 °C (+ 113 °F), factory-set at 35 °C (+ 95 °F)
Fault display: temperature inside enclosure
(factory-set)
> + 50°C (+ 122°F)
Ambient air temperature
+ 15°C (+ 59°F) … + 55 °C (+131°F)
Air volume 2), external circuit
570 m3/h
885 m3/h
Air volume 2), internal circuit
570 m3/h
885 m3/h
Condensate discharge
condensate drain
2) free-flow
Electrical data
DTI/DTS 9141
Rated voltage
Rated frequency
400V 2~*
230V
50 Hz
DTI / DTS 9341C
60 Hz
50 Hz
115V
60 Hz
Voltage range
230 V
60 Hz
50 Hz
60 Hz
842 W
907 W
1047 W
DIN IEC 60038
Power consumption at A 35 / A 35
515 W
623 W
576 W
697 W
Current consumption
2,98 A
3,25 A
2,73 A
2,98 A
9,1 A
5,4 A
6A
Starting current
23,3 A
25,40 A
13,94 A
15,19 A
33,2 A
33,2 A
27,6 A
* Rated voltage can be set on the device at 400, 440 and 460 V
Supplementary data
DTI 9141
DTS 9141
DTI 9341C
DTS 9341C
Height
958 mm
964 mm
958 mm
964 mm
39 kg
41 kg
Width
410 mm
Depth
Weight (without packaging)
Orientation
Unit construction
248 mm
36 kg
43 kg
36 kg
vertical
standard: sheet steel / optional extra: stainless steel
Corrosion protection
standard: galvanized/electrostatically powder-coated (200°C) RAL 7035, RAL7032 / optional extra: stainless steel
System of protection
IP 54 against the enclosure (EN 60529), when used as recommended
IP 34 against the ambience (EN 60529), when used as recommended
Standard scope of supply
Zulassung
20
operating instructions, technical datasheet, installation kit incl. plug-in connector
see overview cooling units / approvals
We reserve the right to technical alterations.Subject to correction. 075000053
1) Refrigeration capacity according to EN 814
ELECTRO-TECHNOLOGY FOR INDUSTRY
Installation cutout:
Mechanical data:
410
DTS 9141
270
45
DTI 9141
350
15
45
320
270
380
Ø 136
Ø 136
R10
cutout
Ø8
plug-in connector
15
0
–2
15
warm air inlet
warm air inlet
248
device contour
(cover)
cold air outlet
100
295
410
57,5
295
410
DTS 9341C
8
224
235,5
55
Ø8
cutout
57,5
120,3
100
235,5
958 (DTI)
964 (DTS)
120,3
774
964
cold air outlet
774
900 +20
958
562
662
device contour
(cover)
DTI 9341C
350
260
320
45
Ø8
15
warm air
inlet
warm air
inlet
device contour
(cover)
562
cold air
outlet
662
57,5
774
235,5
295
410
57,5
DTI/DTS 9141 temperature inside
115V
enclosure Ti
295
410
DTI/DTS 9341Ctemperature inside
refrigeration
temperature inside
capacity Q0 (Watt) 230V/400V 2~
enclosure Ti
refrigeration
capacity Q0 (Watt)
refrigeration
capacity Q0 (Watt)
1500
1500
2500
1250
1250
1000
1000
750
750
enclosure Ti
2000
1500
1000
+45°C
500
500
+45°C
+35°C
250
+25°C
25
35
45
55 Ta (°C)
ambient air temperature
+35°C
250
+45°C
+35°C
500
+25°C
25
35
45
55 Ta (°C)
ambient air temperature
+25°C
25
35
45
55 Ta (°C)
ambient air temperature
21
We reserve the right to technical alterations.Subject to correction. 075000053
DTI/DTS 9141
224
235,5
55
195
195
774
cold air
outlet
900 +20
958
device contour
(cover)
Characteristic curves: DTI / DTS 9141, DTI / DTS 9341C –
Effective refrigeration capacity
15
Ø 159
8
(cover DTS)
230
964
condensate drain
0
–2
cutouts
R10
(cover DTI)
166
260
380
15
45
Ø 159
No tools
required for installing
the exceptional DTI range
see page 15
Cooling units for door- and side-mounting DTI / DTS 9031
and DTI / DTS 9041 for partially recessed or external
mounting: 410 to 870 W
G
G
G
G
G
G
G
easy to install: no drilling (DTI range) or fitting enclosure seal
suitable for door widths of 500 mm or more
optimum long air passage in internal circuit
fault and door contacts as standard electronics
extremely good air circulation inside enclosure
rapid fixing
optional with integrated condensate evaporation (DTI/DTS 9041)
CM
Max. clearance
between air inlet
and outlet
Eyebolts
installation
Partially recessed
installation
(DTI 9041)
CC
MC
SC
V2A
Optional extra
Refrigeration data
Suitable for both
50 Hz and 60 Hz
Standard Controller
Comfort Controller
(optional extra)
DTI / DTS 9041
Integrated condensate evaporation
(optional extra)
(DTI/DTS 9041)
Side-mounted
installation
(DTS 9041)
IP 54
Level of protection
in respect of enclosure
(EN 60529)
Multi Controller
(optional extra)
DTI / DTS 9031
Cooling capacity at A35/A351)
870 W
810 W
790 W
510 W
560 W
410 W
540 W
585 W
Cooling capacity at A50/A351)
580 W
483 W
590 W
365 W
395 W
305 W
360 W
545 W
Type of refrigerant
R134a
Amount of refrigerant
400 g
Thermostat setting
adjustable within a range of + 25°C (+ 77 °F) to 45 °C (+ 113 °F), factory-set at 35 °C (+ 95 °F)
250 g
Fault display: temperature inside enclosure
(factory-set)
> + 50°C (+ 122°F)
Ambient air temperature
+ 15°C (+ 59°F) … + 55 °C (+131°F)
Air volume 2), external circuit
570 m3/h
345 m3/h
Air volume 2), internal circuit
570 m3/h
280 m3/h
Condensate discharge
condensate drain
2) free-flow
Electrical data
Rated voltage
Rated frequency
DTI / DTS 9041
230V
400V 2~ *
DTI / DTS 9031
115V
50 Hz 60 Hz 50 Hz 60 Hz
60 Hz
Power consumption at A 35 / A 35
524 W 634 W 580 W 702 W
783 W
Current consumption
3,06 A 3,34 A 3,2 A 3,49 A
7,6 A
Starting current
22,16 A 24,15 A 20,2 A 22,02 A
40,1 A
Voltage range
400V 2 ~ *
230V
50 Hz
115V
60 Hz
50 Hz
60 Hz
60 Hz
283 W
337 W
297 W
354 W
322 W
1,58 A
1,64 A
1,59 A
1,53 A
3,29 A
14,31 A
13,8 A
8,63 A
7,86 A
26,15 A
DIN IEC 60038
* Rated voltage can be set on the device at 400, 440 and 460 V
Supplementary data
DTI / DTS 9041
DTI / DTS 9031
Weight (without packaging) DTI
29,5 kg
37 kg
29,5 kg
21 kg
26 kg
21 kg
Weight (without packaging) DTS
29,5 kg
29,5 kg
29,5 kg
22 kg
27 kg
22 kg
Orientation
Unit construction
vertical
standard: sheet steel / optional extra: stainless steel
Corrosion protection
Colour
Insulation
standard: galvanized/electrostatically powder-coated (200°C) RAL 7035, RAL7032 / optional extra: stainless steel
RAL 7032 (european grey) and RAL 7035 (light grey), other colours available on request
according to DIN 31001
System of protection
IP 54 against the enclosure (EN 60529), when used as recommended
IP 34 against the ambience (EN 60529), when used as recommended
Standard scope of supply
Approvals
22
operating instructions, technical datasheet, installation kit incl. plug-in connector
see overview cooling units / approvals
We reserve the right to technical alterations.Subject to correction. 075000053
1) Refrigeration capacity according to EN 814
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
DTI 9041
DTS 9041
115/230 V
565
310
115/230 V
599
380
344
231
60
only 400 V
132
152
244
171
115/230 V
604
380
D1
A1
D2
231
only 400 V
132
152
244
171
only
400V
only
400V
D3
only 400 V
141
125
187
131
C2
D4
212
DTI / DTS 9031 and DTI / DTS 9041
B1
D1
D2
D3
D4
DTS 9031
115/230 V
562
310
256
212
67
only 400 V
141
125
187
131
B2
A1
B1
B2
C1
C2
DTI 9031
C1
Installation cutout:
DTS 9041
DTI 9041
258,5
DTS 9031
47,5
140
cutout
47,5
47,5
6,5
140
285
258,5
warm air
inlet
DTI 9031
310
300
285
310
265 -20
208,5
215
208,5
92
cutout
92
cutout
R10
warm air inlet
device contour
(cover)
device contour
(cover)
558
423,5
140
140
40
105,5
95
0
–2
54
272
265
380
8
57,5
0
R1
235
57,5
195
32
54
57,5
380
80
265
70
57,5
80
11
350
5
105,5
15
495 +20
435
564
cold air outlet
cold air outlet
423,5
422
288
8
cutout
607
14
cold air outlet
110
95
110
warm air inlet
device contour
(cover)
330
481,5
cold air
outlet
577 +20
602
12
150
warm air inlet
device contour (cover)
195
Characteristic curves: DTI / DTS 9031 and DTI / DTS 9041 - Effective refrigeration capacity
875
750
+45°C
625
+35°C
500
375
+25°C
refrigeration
capacity Q0 (Watt)
875
625
625
500
+25°C
25
55 Ta (°C)
+35°C
250
35
45
25
55 Ta (°C)
refrigeration
capacity Q0 (Watt)
DTI / DTS 9041 temperature inside
enclosure Ti
230 V
refrigeration
capacity Q0 (Watt)
1500
1500
1250
1250
1250
1000
1000
1000
750
750
750
250
25
35
45
55 Ta (°C)
ambient air temperature
35
500
+45°C
+35°C
+25°C
250
25
35
45
55 Ta (°C)
ambient air temperature
45
55 Ta (°C)
ambient air temperature
1500
+45°C
+35°C
+25°C
+25°C
125
ambient air temperature
ambient air temperature
500
+45°C
375
+35°C
125
refrigeration DTI / DTS 9041 temperature inside
capacity Q0 (Watt)
enclosure Ti
115 V
DTI / DTS 9031 temperature inside
enclosure Ti
400 V 2~
500
+45°C
375
125
45
875
750
250
35
refrigeration
capacity Q0 (Watt)
750
250
25
DTI / DTS 9031 temperature inside
enclosure Ti
230 V
DTI / DTS 9041 temperature inside
enclosure Ti
400 V 2~
500
+45°C
+35°C
+25°C
250
25
35
45
55 Ta (°C)
ambient air temperature
23
We reserve the right to technical alterations.Subject to correction. 075000053
refrigeration DTI / DTS 9031 temperature inside
enclosure Ti
capacity Q0 (Watt) 115 V
DTFI 9021
cutout compatible
with filterfans
PF 65.000 - PF 67.000
see page 90
Compact cooling units:
DTFI / DTI 9021, 320W
The optimum for space-saving, efficient air-conditioning
G
G
G
G
G
G
easy and quick to install, without any drilling (DTFI 9021)
high-capacity performance in compact design
ideal for small enclosures and control panels
diagnosis report for status monitoring system
low-profile design for integration into machine enclosures (DTFI 9021)
DTFI 9021 cutout compatible with filterfans PF 65.000 - 67.000,
PF 5.000, PF 6.000, PF 7.000, PF 6.500SL1 and PF 6.000SL2
G shallow installation depth when partially recessed (DTI 9021)
G optimum reliability with standard electronics
(e.g. fault and door contacts)
G optional with integrated condensate evaporation
IP 54
Cutout
compatibility
Suitable for both
50 Hz and 60 Hz
Recessed
installation
(DTFI 9021)
Partially recessed
installation
(DTI 9021)
Level of protection
in respect of
enclosure
(EN 60529)
CM
Integrated condensate evaporation
(optional extra)
SC
Standard Controller
Refrigeration data
DTFI 9021
DTI 9021
Cooling capacity at A35/A351)
320 W
320 W
340 W
230 W
290 W
320 W
320 W
340 W
Cooling capacity at A45/A351)
250 W
300 W
330 W
220 W
280 W
250 W
300 W
330 W
Type of refrigerant
R134a
Amount of refrigerant
350 g
Thermostat setting
adjustable within a range of + 25°C (+ 77 °F) to 45 °C (+ 113 °F), factory-set at 35 °C (+ 95 °F)
Fault display:
temperature inside enclosure
> + 50°C (+ 122°F) (factory-set)
Ambient air temperature
+ 15°C (+ 59°F) … + 45 °C (+113°F)
Air volume 2), external circuit
282 m3/h
Air volume 2), internal circuit
282 m3/h
Condensate discharge
condensate drain
2) free-flow
Electrical data
DTFI 9021
DTI 9021
Rated voltage
115 V
230V
400V
Rated frequency
60 Hz
50 Hz
60 Hz
50 Hz
60 Hz
240 W
230 W
230 W
260 W
240 W
290 W
200 W
230 W
200 W
230 W
Voltage range
Power consumption at A 35 / A 35
A 45 / A 35
115 V
230V
60 Hz
50 Hz
60 Hz
240 W
230 W
230 W
189 W
240 W
268 W
DIN IEC 60038
Current consumption
2,7 A
1,6 A
1,6 A
1A
0,9 A
2,7 A
1,6 A
1,6 A
Starting current
11,4 A
11,7 A
10,9 A
6,6 A
5,9 A
11,4 A
11,7 A
10,9 A
Supplementary data
Height
DTFI 9021
326 mm
DTI 9021
464 mm
Width
Depth
Weight (without packaging)
Orientation
Unit construction
329 mm
385 mm
252 mm
16 kg
252 mm
22 kg
17 kg
vertical
sheet steel
Corrosion protection
standard: galvanized/electrostatically powder-coated (200°C) RAL 7035, RAL7032
System of protection
IP 54 against the enclosure (EN 60529), when used as recommended
IP 34 against the ambience (EN 60529), when used as recommended
Standard scope of supply
Approvals
24
operating instructions, technical datasheet, installation kit incl. plug-in connector
see overview cooling units / approvals
We reserve the right to technical alterations.Subject to correction. 075000053
1) Refrigeration capacity according to EN 814
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
DTFI 9021
DTI 9021
170
326
300
329
75
286
156
only
400V
326
118
385
385
67
326
300
7
83
178
160
286
only
400V
7
Installation cutout:
DTFI 9021
DTI 9021
385
385
304+2
–0
40,5
291+2
–0
47
254
8
254,5
155
cutout
155
19
cutout
device contour
(cover)
device contour
(cover)
228
326
291+2
–0
cold air outlet
7,5
27
62
210+1
–0
261
We reserve the right to technical alterations.Subject to correction. 075000053
47
41,7
47
261
62
19,5
41,7
20,5
27
229
cold air outlet
289+2
–0
304+1
–0
328,5
warm air inlet
warm air inlet
Characteristic curves: DTFI / DTI 9021 – Effective refrigeration capacity
temperature inside
enclosure Ti
refrigeration
capacity Q0 (Watt)
500
400
+45°C
+35°C
300
+25°C
200
100
25
35
45 Ta (°C)
ambient air temperature
25
Outdoor cooling units
DTS 3661/DTS 3681, 5500W
NEMA 3R/4, NEMA 4/4X version
NEW!
G
G
G
G
G
G
G
high degree of protection IP 56
condenser protected against aggressive operating conditions
high-capacity performance in compact design
available in stainless steel
maintenance-free
suitable for food industry and outdoor applications
integrated condensate evaporation
IP 56
Side-mounted
installation
Refrigeration data
System of
protection
3R/4
4/4X
V2A
NEMA System
of protection
DTS 3661 (NEMA 3R/4)
DTS 3681
SC
CM
Standard Controller
Integrated condensate evaporation
DTS 3681 (NEMA 4/4X)
Cooling capacity at A35/A351)
5500 W
6100 W
5500 W
6100 W
Cooling capacity at A50/A351)
4430 W
4900 W
4430 W
4900 W
Type of refrigerant
R134a
Amount of refrigerant
1300 g
Thermostat setting
adjustable within a range of + 25°C (+ 77 °F) to 45 °C (+ 113 °F), factory-set at 35 °C (+ 95 °F)
Hysteresis
4K
Air volume 2), external circuit
2365 m3/h
2740 m3/h
2365 m3/h
2740 m3/h
Air volume 2), internal circuit
2365 m3/h
2740 m3/h
2365 m3/h
2740 m3/h
Noise level
73dB (A)
Duty cycle
100%
integrated condensate management
2) free-flow
Electrical data
DTS 3661 (NEMA 3R/4)
DTS 3681 (NEMA 4/4X)
Rated voltage 3)
400 V
460V
400 V
460V
Rated frequency
50 Hz
60 Hz
50 Hz
60 Hz
360V…440V
416V…506V
360V…440V
416V…506V
2920 W
2275 W
Voltage range
Power consumption
2275 W
Current consumption
6,3 A
Starting current
25 A
Type of connection
3) other voltages on request
Supplementary data
25 A
terminal
DTS 3661 (NEMA 3R/4)
DTS 3681 (NEMA 4/4X)
Height
1667 mm
Width
483 mm
Depth
Weight (without packaging)
623 mm
108 kg
Orientation
Unit construction
2920 W
6,3 A
109 kg
side or vertical
sheet steel
304 stainless steel
Corrosion protection
galvanized/electrostatically powder-coated (200°C)
304 stainless steel
System of protection
NEMA 3R/4 against the enclosure, NEMA 1 for
external circuit, when used as recommended
NEMA 4/4X against the enclosure, NEMA 1 for
external circuit, when used as recommended
Standard scope of supply
Approvals
26
ready for connection to mains with power cable with fault and door contact line, operating instructions,
sealing material, technical datasheet, installation kit with plug-in connector, PVC-tube for condensate drain
see overview cooling units / approvals
We reserve the right to technical alterations.Subject to correction. 075000053
Condensate discharge
1) Refrigeration capacity according to EN 814
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
Installation cutout
DTS 36xx NEMA 3R/4X
DTS 36xx NEMA 3R/4X
623
210
635
240
15 x Ø 10
740
240
210
35
740
240
350
1650
1667
350
477
285
240
900
420
240
28,5
517
360
65
190
30
50,8
483
Characteristic curves: DTS 3661 and DTS 3681 – Effective refrigeration capacity
temperature inside
enclosure Ti
400 V 50 Hz
refrigeration
capacity Q0 (Watt)
7000
7000
6000
6000
5000
temperature inside
enclosure Ti
460 V 60 Hz
5000
+45°C
+35°C
+25°C
4000
3000
2000
2000
1000
1000
20
25
35
45
55 Ta (°C)
ambient air temperature
+45°C
+35°C
+25°C
4000
3000
We reserve the right to technical alterations.Subject to correction. 075000053
refrigeration
capacity Q0 (Watt)
20
25
35
45
55 Ta (°C)
ambient air temperature
27
Outdoor cooling units
DTS 3561/DTS 3581, 4000W
NEMA 3R/4, NEMA 4/4X version
NEW!
G
G
G
G
G
G
G
high degree of protection IP 56
condenser protected against aggressive operating conditions
high-capacity performance in compact design
available in stainless steel
maintenance-free
suitable for food industry and outdoor applications
integrated condensate evaporation
IP 56
Side-mounted
installation
Refrigeration data
System of
protection
3R/4
4/4X
V2A
NEMA System
of protection
DTS 3561 (NEMA 3R/4)
DTS 3581
SC
CM
Standard Controller
Integrated condensate evaporation
DTS 3581 (NEMA 4/4X)
Cooling capacity at A35/A351)
4000 W
4400 W
4000 W
4400 W
Cooling capacity at A50/A351)
3100 W
3500 W
3100 W
3500 W
Type of refrigerant
R134a
Amount of refrigerant
1200 g
Thermostat setting
adjustable within a range of + 25°C (+ 77 °F) to 45 °C (+ 113 °F), factory-set at 35 °C (+ 95 °F)
Hysteresis
4K
Air volume 2), external circuit
2130 m3/h
2380 m3/h
2130 m3/h
2380 m3/h
Air volume 2), internal circuit
1200 m3/h
1340 m3/h
1200 m3/h
1340 m3/h
Noise level
72dB (A)
Duty cycle
100%
integrated condensate management
2) free-flow
Electrical data
DTS 3561 (NEMA 3R/4)
DTS 3581 (NEMA 4/4X)
Rated voltage 3)
400 V
460V
400 V
460V
Rated frequency
50 Hz
60 Hz
50 Hz
60 Hz
360V…440V
416V…506V
360V…440V
416V…506V
1815 W
1365 W
Voltage range
Power consumption
1365 W
Current consumption
4,4 A
Starting current
16 A
16 A
Type of connection
3) other voltages on request
Supplementary data
terminal
DTS 3561 (NEMA 3R/4)
DTS 3581 (NEMA 4/4X)
Height
1502 mm
Width
483 mm
Depth
534 mm
Weight (without packaging)
104 kg
105 kg
Orientation
Unit construction
1815 W
4,4 A
side or vertical
sheet steel
304 stainless steel
Corrosion protection
galvanized/electrostatically powder-coated (200°C)
304 stainless steel
System of protection
NEMA 3R/4 against the enclosure, NEMA 1 for
external circuit, when used as recommended
NEMA 4/4X against the enclosure, NEMA 1 for
external circuit, when used as recommended
Standard scope of supply
Approvals
28
ready for connection to mains with power cable with fault and door contact line, operating instructions,
sealing material, technical datasheet, installation kit with plug-in connector, PVC-tube for condensate drain
see overview cooling units / approvals
We reserve the right to technical alterations.Subject to correction. 075000053
Condensate discharge
1) Refrigeration capacity according to EN 814
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
Installation cutout
DTS 35xx NEMA 3R/4X
DTS 35xx NEMA 3R/4X
534
216
590
15 x Ø 10
740
216
25,4
210
150
216
740
850
1502
1520
280
67,5
285
390
28,5
420
477
427
70
483
216
216
380
20
temperature inside
enclosure Ti
400 V 50 Hz
refrigeration
capacity Q0 (Watt)
refrigeration
capacity Q0 (Watt)
6000
6000
5000
5000
4000
4000
+45°C
+35°C
+25°C
3000
2000
1000
1000
20
25
35
45
55 Ta (°C)
ambient air temperature
temperature inside
enclosure Ti
460 V 60 Hz
+45°C
+35°C
+25°C
3000
2000
We reserve the right to technical alterations.Subject to correction. 075000053
Characteristic curves: DTS 3561 and DTS 3581 – Effective refrigeration capacity
20
25
35
45
55 Ta (°C)
ambient air temperature
29
Outdoor cooling units
DTS 3361/DTS 3381, 2800W
NEMA 3R/4, NEMA 4/4X version
NEW!
G
G
G
G
G
G
G
high degree of protection IP 56
condenser protected against aggressive operating conditions
high-capacity performance in compact design
available in stainless steel
maintenance-free
suitable for food industry and outdoor applications
integrated condensate evaporation
IP 56
Side-mounted
installation
Refrigeration data
System of
protection
3R/4
4/4X
V2A
NEMA System
of protection
DTS 3361 (NEMA 3R/4)
DTS 3381
SC
CM
Standard Controller
Integrated condensate evaporation
DTS 3381 (NEMA 4/4X)
Cooling capacity at A35/A351)
2800 W
3000 W
2800 W
3000 W
Cooling capacity at A50/A351)
1900 W
2100 W
1900 W
2100 W
Type of refrigerant
R134a
Amount of refrigerant
1000 g
Thermostat setting
adjustable within a range of + 25°C (+ 77 °F) to 45 °C (+ 113 °F), factory-set at 35 °C (+ 95 °F)
Hysteresis
4K
Air volume 2), external circuit
1435 m3/h
1685 m3/h
1435 m3/h
1685 m3/h
Air volume 2), internal circuit
1200 m3/h
1340 m3/h
1200 m3/h
1340 m3/h
Noise level
73dB (A)
Duty cycle
100%
integrated condensate management
2) free-flow
Electrical data
DTS 3361 (NEMA 3R/4)
DTS 3381 (NEMA 4/4X)
Rated voltage 3)
400 V
460V
400 V
460V
Rated frequency
50 Hz
60 Hz
50 Hz
60 Hz
360V…440V
416V…506V
360V…440V
416V…506V
1800 W
1400 W
Voltage range
Power consumption
1400 W
Current consumption
3,6 A
Starting current
16 A
16 A
Type of connection
3) other voltages on request
Supplementary data
terminal
DTS 3361 (NEMA 3R/4)
DTS 3381 (NEMA 4/4X)
Height
1502 mm
Width
403 mm
Depth
468 mm
Weight (without packaging)
100 kg
101 kg
Orientation
Unit construction
1800 W
3,6 A
side or vertical
sheet steel
304 stainless steel
Corrosion protection
galvanized/electrostatically powder-coated (200°C)
304 stainless steel
System of protection
NEMA 3R/4 against the enclosure, NEMA 1 for
external circuit, when used as recommended
NEMA 4/4X against the enclosure, NEMA 1 for
external circuit, when used as recommended
Standard scope of supply
Approvals
30
ready for connection to mains with power cable with fault and door contact line, operating instructions,
sealing material, technical datasheet, installation kit with plug-in connector, PVC-tube for condensate drain
see overview cooling units / approvals
We reserve the right to technical alterations.Subject to correction. 075000053
Condensate discharge
1) Refrigeration capacity according to EN 814
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
Installation cutout
DTS 33xx NEMA 3R/4X
DTS 33xx NEMA 3R/4X
468
740
215,9
590
15 x Ø 10
215,45
25,85
175
32,5
160
215,9
850
1520
1502
280
285
403
363
215,9
410
740
20
215,9
310
28,2
406,4
We reserve the right to technical alterations.Subject to correction. 075000053
70
350
Characteristic curves: DTS 3361 and DTS 3381 – Effective refrigeration capacity
refrigeration
capacity Q0 (Watt)
temperature inside
enclosure Ti
400 V 50 Hz
refrigeration
capacity Q0 (Watt)
5000
5000
4000
4000
3000
3000
+45°C
+35°C
+25°C
2000
1000
20
25
35
45
55 Ta (°C)
ambient air temperature
temperature inside
enclosure Ti
460 V 60 Hz
+45°C
+35°C
+25°C
2000
1000
20
25
35
45
55 Ta (°C)
ambient air temperature
31
Outdoor cooling units
DTS 3261/DTS 3281, 2000W
NEMA 3R/4, NEMA 4/4X version
G
G
G
G
G
G
G
high degree of protection IP 56
condenser protected against aggressive operating conditions
high-capacity performance in compact design
available in stainless steel
maintenance-free
suitable for food industry and outdoor applications
integrated condensate evaporation
3R/4
4/4X
IP 56
Side-mounted
installation
Refrigeration data
System of
protection
NEMA System
of protection
DTS 3281
SC
CM
Standard Controller
Integrated condensate evaporation
DTS 3261 (NEMA 3R/4) / DTS 3281 (NEMA 4/4X)
Cooling capacity at A35/A351)
2000 W
Cooling capacity at A50/A351)
1850 W
Type of refrigerant
R134a
Amount of refrigerant
700 g
Thermostat setting
adjustable within a range of + 25°C (+ 77 °F) to 45 °C (+ 113 °F), factory-set at 35 °C (+ 95 °F)
Hysteresis
4K
Air volume 2), external circuit
765 m3/h
Air volume 2), internal circuit
765 m3/h
Duty cycle
100%
Condensate discharge
integrated condensate management
2) free-flow
Electrical data
DTS 3261 (NEMA 3R/4)
DTS 3281 (NEMA 4/4X)
Rated voltage
115V
230V
400 V / 460V
115V
230V
400V / 460V
Rated frequency
60 Hz
50/60 Hz
50/60 Hz
60 Hz
50/60 Hz
50/60 Hz
Voltage range
103V…127V
198V…252V
360V…440V / 404V…506V
103V…127V
198V…252V
360V…440V / 404V…506V
Power consumption
1680 W
1425 W
1400 W
1680 W
1425 W
1400 W
Current consumption
14,6 A
6,3 A
3,5 A
14,6 A
6,3 A
3,5 A
Starting current
53 A
21,8 A
10,0 A
53 A
21,8 A
10,0 A
Type of connection
terminal
Supplementary data
DTS 3261 (NEMA 3R/4)
DTS 3281 (NEMA 4/4X)
Height
1209 mm
Width
395 mm
Depth
Weight (without packaging)
326 mm
56 kg
63 kg
Orientation
Unit construction
Corrosion protection
System of protection
Standard scope of supply
Approvals
32
60 kg
67 kg
side or vertical
sheet steel
304 stainless steel
galvanized/electrostatically powder-coated (200°C)
304 stainless steel
NEMA 3R/4 + NEMA 4/4X against the enclosure, when used as recommended
operating instructions, technical datasheet, installation kit incl. plug-in connector
see overview cooling units / approvals
We reserve the right to technical alterations.Subject to correction. 075000053
1) Refrigeration capacity according to EN 814
V2A
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
Installation cutout
DTS 32xx NEMA 3R/4X
DTS 32xx NEMA 3R/4X
200
15
15
395
228,6
350
228,6
330
545
228,6
14x Ø 8
1209
38,1
326
80
8
228,6
100
228,6
50,1
162,3
269
34
292
34
360
Characteristic curves: DTS 3261 and DTS 3281 –
Effective refrigeration capacity
temperature inside
enclosure Ti
refrigeration
capacity Q0 (Watt)
We reserve the right to technical alterations.Subject to correction. 075000053
3000
2500
+45°C
+35°C
+25°C
2000
1500
1000
25
35
45
55 Ta (°C)
ambient air temperature
33
Compact outdoor cooling units
DTS 3161/DTS 3181, 1100W
NEMA 3R/4, NEMA 4/4X version
G
G
G
G
G
G
G
high degree of protection IP 56
condenser protected against aggressive operating conditions
high-capacity performance in compact design
available in stainless steel
maintenance-free
suitable for food industry and outdoor applications
integrated condensate evaporation
3R/4
4/4X
IP 56
Side-mounted
installation
Refrigeration data
System of
protection
NEMA System
of protection
Standard Controller
Integrated condensate evaporation
DTS 3181 (NEMA 4/4X)
950 W
Type of refrigerant
R134a
Amount of refrigerant
400 g
Thermostat setting
adjustable within a range of + 25°C (+ 77 °F) to 45 °C (+ 113 °F), factory-set at 35 °C (+ 95 °F)
Hysteresis
4K
Air volume 2), external circuit
595 m3/h
Air volume 2), internal circuit
595 m3/h
Condensate discharge
integrated condensate management
2) free-flow
DTS 3161 (NEMA 3R/4)
115V
230V
DTS 3181 (NEMA 4/4X)
400V / 460V
115V
230V
400V / 460V
60 Hz
50/60 Hz
50/60 Hz
60 Hz
50/60 Hz
50/60 Hz
103V…127V
198V…252V
360V…440V / 404V…506V
103V…127V
198V…252V
360V…440V / 404V…506V
Power consumption
712 W
712 W
760 W
712 W
712 W
760 W
Current consumption
7,9 A
3,9 A
1,9 A
7,9 A
3,9 A
1,9 A
Starting current
29,9 A
14,9 A
8,0 A
29,9 A
14,9 A
8,0 A
Voltage range
Type of connection
terminal
Supplementary data
Weight (without packaging)
DTS 3161 (NEMA 3R/4)
40 kg
Height x Width x Depth
Colour
DTS 3181 (NEMA 4/4X)
44 kg
42 kg
RAL 7032 (european grey), other colours available on request
Insulation
according to EN 60529
Climatic data
max. ambient temperature + 55°C
Orientation
Unit construction
Corrosion protection
System of protection
Standard scope of supply
Approvals
34
46 kg
748 x 395 x 294 mm
side or vertical
sheet steel
304 stainless steel
galvanized/electrostatically powder-coated (200°C)
304 stainless steel
NEMA 3R / NEMA 4/4X against the enclosure, when used as recommended
operating instructions, technical datasheet, installation kit incl. plug-in connector
see overview cooling units / approvals
We reserve the right to technical alterations.Subject to correction. 075000053
Electrical data
Rated frequency
CM
1100 W
Cooling capacity at A50/A351)
Rated voltage
DTS 3181
DTS 3161 (NEMA 3R/4)
Cooling capacity at A35/A351)
1) Refrigeration capacity according to EN 814
SC
V2A
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
Installation cutout
DTS 31xx NEMA 3R/4X
DTS 31xx NEMA 3R/4X
200
80
25
25
228,6
748
300
228,6
310
38,1
395
294
10x Ø 8
81
8
228,6
56
402
50,1
237
34
292
34
360
Characteristic curves: DTS 3161 and DTS 3181 –
Effective refrigeration capacity
temperature inside
enclosure Ti
refrigeration
capacity Q0 (Watt)
1500
1250
+45°C
1000
We reserve the right to technical alterations.Subject to correction. 075000053
+35°C
+25°C
750
500
25
35
45
55 Ta (°C)
ambient air temperature
35
ELECTRO-TECHNOLOGY FOR INDUSTRY
rust
free
Stainless Steel Cooling Units
G for applications where hygienic conditions and corrosion protection are
essential. Our stainless steel cooling units have all your requirements
G our cooling units are particularly designed for
– food industry
– the hygienic packing industry and
antiseptic processing
G available for nearly all units of the series 9000 and 3000
36
We reserve the right to technical alterations.Subject to correction. 075000053
Stainless
steel cover
(1.4301)
Electronic control system for cooling units
ELECTRO-TECHNOLOGY FOR INDUSTRY
Beginning with the DT(F)I 9021, DTI / DTS 9031, DTI / DTS 9x41, DTS 7101 and DTS 7441/7541, ranges, all Pfannenberg cooling units are equipped with
the new smart standard electronics. This means that you can now take advantage not only of the extremely long air passage, but also of the new
standard featuring cooling unit electronics.
Take advantage of the cooling unit electronics!
More power for your machines and systems
More convenience
G optimises the cooling system for your machines
G additional functions such as test mode and start-up time lag
Enhanced availability for your machines and systems
More safety for man and machine
G e.g. early warning of excessive temperatures and automatic monitoring
G e.g. door contact feature
SC
Smart Standard-Controller
in detail
Test mode
G conducts a function test on your cooling unit function at any time
Pfannenberg
display panel
Fault diagnosis
G fault analysis indicated by LED pilot light
Temperature limits
Informative LED
G adjustable, supplementary alarm for maximum temperature limit
G differentiates between normal operation, test mode, hardware fault
and application fault (e.g. shortened air supply)
Start-up time lag
Door contact feature
G delays restart of cooling unit, e.g. after enclosure door opened
Optional extra:
Pfannenberg Comfort-Controller
All standard electronic functions
Multi-Master interface
G easy to wire with two wiring connectors
G common circuit for up to 20 cooling units
G effective, rapid cooling for large-size enclosures
MC
Coming soon
Basics for integration into bus link
G existing bus system in your facility
G expansion of service functions in your system
G telemonitoring and remote diagnosis from control room
G clarification with user in order to define both the interface (e.g. RS 232)
and the protocol
Optional extra: Pfannenberg Multi-Controller –
Make use of the extra benefits the Pfannenberg Multi-Controller has to offer:
All functions available with the Standard and Comfort-Controllers
Control panel with temperature display
G simple layout with easy-to-use controls
G inside temperature and error message displayed in event of a fault
Optical interface (optional extra)
Separate temperature probe with 3 m cable
G for monitoring temperatures in potential hotspots; also possible
to optimise consumer layout if necessary
Unit parameter settings
G optimises cooling efficiency for your application
Pfannenberg
control panel
We reserve the right to technical alterations.Subject to correction. 075000053
CC
G deactivates the cooling unit if the enclosure door is opened
Options using optical interface
G 24-hour analysis using PC/laptop
G telemonitoring from control room
Pfannenberg Multi-Master function
Both the Comfort and Multi-Controllers each provide a Multi-Master function enabling you to synchronise control
of up to 20 cooling units. Depending on which of the cooling units reaches the set point temperature first, the
Multi-Master function ensures that all the other cooling units automatically cut in. The last cooling unit to reach
the set point temperature ends the cooling cycle for all units.
Optical interface for Multi-Controller:
With additional software (on request) and an optical interface, you can store and/or transfer all device settings
and status values. When in online mode, you can log the curve for the temperature inside the enclosure.
The optical interface is attached to the display magnetically.
37
Read about
our partially recessed
mounted DTI units
(page 16)
Cooling units for door- and side-mounting:
2500 W, 2000 W, 1500 W, 1400 W, 1100 W and 800 W
G powerful radial fans ensure optimum air circulation inside
the enclosure
G sealed with protective edging,
no extensive work on the installation cutout necessary!
G DTS 7141, 7241 and 7341:
temperature regulated by integrated thermostat
G new standard electronics for DTS 7541/7441
G DTS 7541/7441 are available as standard with special voltage
380V / 400V / 440V / 460V / 480V
IP 54
Max. clearance
between air inlet
and outlet
Cutout
compatibility
SC
DTS 7541
2500 Watt
1800 Watt
Cooling capacity (A 35 / A 35)*
Cooling capacity (A 50 / A 35)*
Type of refrigerant
Amount of refrigerant
Thermostat setting
Overlap
Flow volume (actual)
– Condenser airflow
– Evaporator airflow
Duty cycle
850 g
1000 m3 / h
900 m3 / h
Suitable for both
50 Hz and 60 Hz
Recessed
installation
Optional extra
DTS 7441
2000 Watt
1500 Watt
DTS 7341
DTS 7341 (400 V/440 V)
DTS 7241
1400 Watt
1500 Watt
1100 Watt
1200 Watt
1280 Watt
820 Watt
R 134a
850 g
530 g
530 g
480 g / 430 g
adjustable within a range of 25°C (+ 77 °F) to 50°C (+ 122 °F), factory-set at 35 °C (+ 95 °F)
4K
1000 m3 / h
850 m3 / h
Level of protection
in respect of enclosure
(EN 60529)
V2A
Standard Controller
for DTS 7541 / 7441
Refrigeration data
Eyebolts
installation
450 m3 / h
270 m3 / h
760 m3 / h
560 m3 / h
DTS 7141
800 Watt
500 Watt
480 g
450 m3 / h
270 m3 / h
450 m3 / h
270 m3 / h
DTS 7241
DTS 7141
100 %
* Refrigeration capacity according to EN 814
Rated voltage
DTS 7541
DTS 7441
400 V**
400 V**
DTS 7341
230 V
115 V
DTS 7341 (400 V/440 V)
400 / 440 V
230 V
115 V
230 V
Rated frequency
50 Hz / 60 Hz
50 Hz / 60 Hz
50 Hz / 60 Hz
60 Hz
50 / 60 Hz / 60 Hz
50 Hz / 60 Hz
60 Hz
50 Hz / 60 Hz
Voltage range
380 V ... 480 V
380 V ... 480 V
198 V…252 V 103 V…127 V 360 V...440 V / 396 V...484 V 198 V…252 V 103 V…127 V 198 V…252 V
Power consumption (A 35 / A 35)
1400 W
1200 W
810 W
1100 W
920 W
670 W
780 W
443 W
Current consumption (A 35 / A 35)
3,2 A
2,8 A
4,3 A
13,4 A
2,3 A
3,0 A
7,4 A
3,66 A
Starting current
11,5 A
10,4 A
16,5 A
26,8 A
9,3 A
14,7 A
24,9 A
12,4 A
Interne Steuerspannung
230 V
** Rated voltage can be adjusted on the device within a range of 380–420 V (50Hz) and 440–480 V (60Hz)
Supplementary data
Weight (without packaging)
Orientation
Unit construction
Corrosion protection
Colour
Insulation
Climatic data
System of protection
Type of connection
Standard scope of supply
Accessories
Approvals
38
DTS 7541
75 kg
DTS 7441
75 kg
DTS 7341
DTS 7341 (400 V/440 V)
DTS 7241
58 kg
58 kg
53 kg
vertical, for door- or side-mounting
sheet steel
galvanized/electrostatically powder-coated (200°C); on request: stainless steel cover
RAL 7035, RAL 7032; other colours available on request
according to EN 60529
max. ambient temperature + 55 °C
max. relative humidity 80 %, A 35 / A 35 (EN 814)
IP 54 against the enclosure (EN 60529), when used as recommended
IP 34 against the ambience (EN 60529), when used as recommended
spring terminal with connection for mains voltage,
2 m power cord for mains voltage
door contact and fault contact
and fault contact
sealing material, fixing material, 1 m PVC-tube for condensate drain, technical datasheet and operating instructions
aluminium filter PFA 3000 for DTS 7241 / 7341 / 7141, PFA 6000 for DTS 7441 / 7541
see overview cooling units / approvals
DTS 7141
50 kg
We reserve the right to technical alterations.Subject to correction. 075000053
Electrical data
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
DTS 7541 + DTS 7441
DTS 7341 + DTS 7241 + DTS 7141
200
Ø10
400
330
35
295
52.5
Ø10
1350
390
390
335
270
421.5
397
25
330
24
condensate drain,
outside-Ø 12 mm
condensate drain,
outside-Ø 12 mm
130
595
350
177,5
234
883
1350
1350
cutouts
Installation cutout for all 5 units
drill holes without dimension Ø 8 mm
Characteristic curves: DTS 7541, DTS 7441, DTS 7341, DTS 7241 and DTS 7141 – Effective refrigeration capacity
3500
3000
2500
+ 45 °C
2000
+ 35 °C
1500
refrigeration
capacity Q0 [Watt]
DTS 7341 temperature inside
enclosure Ti
3500
refrigeration
capacity Q0 [Watt]
DTS 7141 temperature inside
enclosure Ti
1750
3000
1500
2500
1250
2000
1000
1500
750
+ 45 °C
+ 35 °C
+ 25 °C
+ 45 °C
+ 25 °C
1000
500
25
35
45
1000
+ 35 °C
500
500
+ 25 °C
250
55 Ta [°C]
25
35
ambient air temperature
refrigeration
capacity Q0 [Watt]
DTS 7441
3500
temperature inside
enclosure Ti
55 Ta [°C]
25
35
45
55 Ta [°C]
ambient air temperature
refrigeration DTS 7241 temperature inside
capacity Q0 [Watt]
enclosure Ti
3500
3000
3000
2500
2500
2000
45
ambient air temperature
2000
+ 45 °C
1500
+ 35 °C
1000
+ 25 °C
500
1500
1000
+ 45 °C
+ 35 °C
+ 25 °C
500
25
35
45
55 Ta [°C]
ambient air temperature
25
35
45
55 Ta [°C]
ambient air temperature
39
We reserve the right to technical alterations.Subject to correction. 075000053
refrigeration DTS 7541 temperature inside
capacity Q0 [Watt]
enclosure Ti
Slimline enclosure cooling units for side-mounting:
1400 W and 1100 W
G very slim design, low-profile construction;
140 mm for 1100W and 1400W capacity
G fitted with protective seal,
no extra work on the installation cutout necessary!
G temperature regulated by integrated thermostat
IP 54
Cutout
compatibility
Min. unit depth
Eyebolts
installation
Suitable for both
50 Hz and 60 Hz
Recessed
mounting with
built-in frame
DTZ xxx possible
Level of protection
in respect of enclosure
(EN 60529)
V2A
Optional extra
Refrigeration data
DTS 7301
1400 Watt
1200 Watt
Cooling capacity (A35/A35)*
Cooling capacity (A50/A35)*
Type of refrigerant
Amount of refrigerant
Thermostat setting
Overlap
Flow volume (actual)
– Condenser airflow
– Evaporator airflow
Duty cycle
Refrigeration
capacity according to EN 814
*
R134a
400V: 650g / 230V: 580g
480g
adjustable within a range of + 25°C (+ 77 °F) to 45 °C (+ 113 °F), factory-set at 35 °C (+ 95 °F)
4K
450m3 /h
270m3 /h
100%
Supplementary data
Weight (without packaging)
Orientation
Unit construction
Corrosion protection
Colour
Insulation
Climatic data
System of protection
Standard scope of supply
Accessories
Approvals
40
DTS 7301
400V
50Hz
360V...440V
1020Watt
1,5A
8,5A
DTS 7201
230V
230V
50Hz
60Hz
50Hz
198V...252V
700Watt
3,4A
14,4A
60Hz
198V...252V
800 Watt
4,3A
16A
570Watt
2,9A
13,5A
650Watt
2,7A
14,4A
230V
DTS 7301
43kg
DTS 7201
41kg
vertical
sheet steel
galvanized/electrostatically powder-coated (200°C); on request: stainless steel cover
RAL 7035, RAL 7032; other colours available on request
according to EN 60529
max. ambient temperature +55°C
max. relative humidity 80%, A35/A35 (EN 814)
IP54 against the enclosure (EN 60529), when used as recommended
IP34 against the ambience (EN 60529), when used as recommended
ready for connection to mains with 2m power cable with fault contact line, sealing material,
fixing material, 1m PVC-tube for condensate drain, technical datasheet and operating instructions
built-in frame DTZ080 up to DTZ140
aluminium filter PFA 3000 for DTS 7201, 7301
see overview cooling units / approvals
We reserve the right to technical alterations.Subject to correction. 075000053
Electrical data
Rated voltage
Rated frequency
Voltage range
Power consumption (A35/A35)
Current consumption (A35/A35)
Starting current
Internal control voltage
DTS 7201
1100 Watt
820 Watt
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
DTS 7301 and DTS 7201
Installation cutout
390
390
140
air outlet
to ambience
289
26
235
53
30
ambient air
intake
R4
0
265
1350
1350
warm air
inlet
20
11
cutouts
275
265
34
912
19
320
280
58
condensate drain, outside-Ø 12 mm
58
R4
0
cold air
outlet
320
583
23
Ø 8 (8x)
DTS 7301
refrigeration
capacity Q0 (Watt)
temperature inside
enclosure Ti
2500
2500
2000
2000
1500
DTS 7201
refrigeration
capacity Q0 (Watt)
We reserve the right to technical alterations.Subject to correction. 075000053
Characteristic curves: DTS7301 and DTS7201 – Effective refrigeration capacity
temperature inside
enclosure Ti
1500
+45°C
1000
+35°C
1000
+45°C
+35°C
+25°C
500
500
25
35
45
55 Ta (°C)
ambient air temperature
+25°C
25
35
45
55 Ta (°C)
ambient air temperature
41
Enclosure cooling units for side-mounting:
820 W and 470 W
G sealed with protective edging,
no extensive work on the installation cutout necessary!
G recessed installation possible for DTS 7001 using our
DTZ210 built-in frame
G temperature regulated by integrated thermostat
G new standard electronics for DTS 7101 (see page 37)
IP 54
Max. clearance
between air inlet
and outlet
SC
Optional extra:
DTS 7101
Refrigeration data
Supplementary data
Weight (without packaging)
Orientation
Unit construction
Corrosion protection
Colour
Insulation
Climatic data
System of protection
Standard scope of supply
Accessories
Approvals
42
Recessed
mounting with
built-in frame
DTZ 210 possible
(DTS 7001)
Level of protection
in respect of enclosure
(EN 60529)
V2A
Optional extra
DTS 7101
820 Watt
635 Watt
DTS 7001
470 Watt
270 Watt / 260 Watt
R134a
480g
280g
adjustable within a range of 25°C (+ 77 °F) to 50°C (+ 122 °F), factory-set at 35 °C (+ 95 °F)
4K
370m3 /h / 580m3 /h
270m3 /h / 450m3 /h
270m3 /h
150m3 /h
100%
Electrical data
Rated voltage
Rated frequency
Voltage range
Power consumption (A35/A35)
Current consumption (A35/A35)
Starting current
Internal control voltage
Suitable for both
50 Hz and 60 Hz
DTS 7101
230V
50 Hz/60Hz
198V…252V
520Watt/610Watt
2,9A/2,5A
8,2A/9,8A
230V
DTS 7001
115V
60 Hz
103V…127V
590 Watt
6,7A
17,5A
115V
DTS 7101
43kg
230V
50 Hz/60Hz
198V…252V
350 Watt/430Watt
2,2A/2,1A
6,9A/7,7A
230V
115V
60 HZ
103V…127V
295 Watt
4,2A
13,8A
115V
DTS 7001
26kg
vertical
sheet steel
galvanized/electrostatically powder-coated (200°C); on request: stainless steel cover
RAL 7035, RAL 7032; other colours available on request
according to EN 60529
max. ambient temperature +55°C
max. relative humidity 80%, A35/A35 (EN 814)
IP 54 against the enclosure (EN 60529), when used as recommended
IP34 against the ambience (EN 60529), when used as recommended
ready for connection to mains with 2m power cable with fault contact line, sealing material,
fixing material, 1m PVC-tube for condensate drain, technical datasheet and operating instructions
optional extra: Multi Controller for DTS 7101
aluminium filter PFA 3000 for DTS 7101
see overview cooling units / approvals
We reserve the right to technical alterations.Subject to correction. 075000053
Cooling capacity (A35/A35)*
Cooling capacity (A50/A35)*
Type of refrigerant
Amount of refrigerant
Thermostat setting
Overlap
Flow volume (actual)
– Condenser airflow
– Evaporator airflow
Duty cycle
Refrigeration
capacity according to EN 814
*
Eyebolts
installation
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
DTS 7101
Installation cutout
air out to
ambience
200
9
372
95
390
130
warm air
inlet
ambient
air in
Ø8
55
280
cutouts
180,5
780
270
116
cold air
outlet
259
760
65,5
210
915
915
Ø8
390
condensate drain,
outside-Ø 12 mm
all radii without dimension = R 20 mm
air out to
ambience
DTS 7001
R2
0
R4
0
warm air
inlet
300
172
20
23
580
535
580
ambient
air in
137
R2
0
385
455
cold air
outlet
200
340
340
30
105
77
Characteristic curves: DTS7101 and DTS7001 – Effective refrigeration capacity
refrigeration
capacity Q0 (Watt)
DTS 7101
temperature inside
enclosure Ti
refrigeration
capacity Q0 (Watt)
1250
1250
1000
1000
+45°C
750
13
We reserve the right to technical alterations.Subject to correction. 075000053
215
20
210
condensate drain, outside-Ø 12 mm
temperature inside
enclosure Ti
DTS 7001
750
+35°C
500
+25°C
250
500
+45°C
250
25
35
45
55 Ta (°C)
ambient air temperature
+35°C
25
35
45
+25°C
55 Ta (°C)
ambient air temperature
43
Enclosure cooling units for side- or wall-mounting:
320 W and 220 W
G compact design
G ideal for snall systems with requency converters
or desk cabinets
G the installation height of the DTS 7061 model is a mere 445mm
G temperature regulated by integrated thermostat
IP 54
Max. clearance
between air inlet
and outlet
Refrigeration data
Cooling capacity (A35/A35)*
Cooling capacity (A50/A35)*
Type of refrigerant
Amount of refrigerant
Thermostat setting
Overlap
Flow volume (actual)
– Condenser airflow
– Evaporator airflow
Duty cycle
Suitable for both
50 Hz and 60 Hz
Level of protection
in respect of enclosure
(EN 60529)
DTS 7061
320 Watt
130 Watt
DTS 7041
220 Watt
95 Watt
R134a
300g
280g
adjustable within a range of + 25°C (+ 77 °F) to 45 °C (+ 113 °F), factory-set at 35 °C (+ 95 °F)
4K
390m3 /h
390m3 /h
390m3 /h
180m3 /h
100%
* Refrigeration capacity according to EN 814
Supplementary data
Weight (without packaging)
Orientation
Unit construction
Corrosion protection
Colour
Insulation
Climatic data
System of protection
Standard scope of supply
Approvals
44
DTS 7061
230V
50 Hz/60Hz
198V…252V
230Watt
1,3A
7,4A
DTS 7041
115V
60 Hz
103V…127V
270 Watt
2,9A
13,8A
230V
50 Hz/60Hz
198V…252V
200Watt
1,3A
9,5A
DTS 7061
23kg
115V
60 HZ
103V…127V
200 Watt
2,2A
15,7A
DTS 7041
18kg
vertical
sheet steel
galvanized/electrostatically powder-coated (200°C)
RAL 7035, RAL 7032; other colours available on request
according to EN 60529
max. ambient temperature +55°C
max. relative humidity 80%, A35 / A35 (EN 814)
IP 54 against the enclosure (EN 60529), when used as recommended
IP34 against the ambience (EN 60529), when used as recommended
ready for connection to mains with 2m power cable with fault contact line, sealing material,
fixing material, 1m PVC-tube for condensate drain, technical datasheet and operating instructions
see overview cooling units / approvals
We reserve the right to technical alterations.Subject to correction. 075000053
Electrical data
Rated voltage
Rated frequency
Voltage range
Power consumption (A35/A35)
Current consumption (A35/A35)
Starting current
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
Dimension DTS 7061
286
14.5
thermostat
Installation cutout
216.5
190.5
119
73
295.4
Ø 142.8
255
25.4
103.4
190.5
Ø 165.1
445
445
Ø8
condensate drain,
outside-Ø 12 mm
315
229.6
315
375
Dimension DTS 7041
375
346
14.5
70
190
Ø8
133.5
22.5
250
124
330
130
140
40
15
103
330
52.8
Ø 50
130
condensate drain,
outside-Ø 12 mm
22.5
209.5
We reserve the right to technical alterations.Subject to correction. 075000053
thermostat
Characteristic curves: DTS 7061, DTS 7041 – Effective refrigeration capacity
DTS 7061
refrigeration
capacity Q0 (Watt)
500
temperature inside
enclosure Ti
500
400
400
300
300
200
DTS 7041
refrigeration
capacity Q0 (Watt)
200
temperature inside
enclosure Ti
+45°C
+45°C
100
+35°C
100
+35°C
0
25
35
45
+25°C
55 Ta (°C)
ambient air temperature
+25°C
0
25
35
45
55 Ta (°C)
ambient air temperature
45
Cooling units for potentially explosive environments (Ex)
DTS-Ex 7x41 1400 W up to 3500 W
G cooling units for environments susceptible to gas or dust
explosions as classified by categories 2G and 3G
(formerly designated as zones 1 and 2)
G high degree of protection; cooling units suitable for outdoor
applications
G EExP pressurised encapsulation (over pressure test- or
supply devices not included)
G four levels of capacity in one single installation cutout
G stainless steel enclosure
G approval no.: TÜV 04 ATEX 2484U
G for use with overpressure encapsulated enclosures
A=B=C=D
IP 65
Cutout
compatibility
Refrigeration data
DTS-Ex 7341
Side-mounted
installation
System of
protection
SC
V2A
Standard Controller
DTS-Ex 7541
DTS-Ex 7641
DTS-Ex 7741
Cooling capacity at A35/A351)
approx. 1400 W
1500 W
approx. 2500 W
approx. 3000 W
approx. 3500 W
Cooling capacity at A50/A351)
approx. 1200 W
1280 W
approx. 1800 W
approx. 2400 W
approx. 2830 W
2000 g
2000 g
Type of refrigerant
R134a
Amount of refrigerant
1300 g
2000 g
Thermostat setting
adjustable within a range of + 25°C (+ 77 °F) to 45 °C (+ 113 °F), factory-set at35 °C (+ 95 °F)
Fault display:
temperature inside enclosure
> + 50°C (+ 122°F), factory-set
Ambient air temperature
- 30°C (+ 22°F)…+ 40°C (+ 104°F)
Temperature inside enclosure
+ 25°C (+ 77°F)…+ 45°C (+ 113°F)
1806 m3/h
Air volume, external circuit
Air volume, internal circuit
560 m3/h
Condensate discharge
integrated condensate pump
Noise level (1m)
< 84 dB (A)
1) Refrigeration capacity according to EN 814
DTS-Ex 7341
DTS-Ex 7541
DTS-Ex 7641
DTS-Ex 7741
Rated voltage
230 V
400 V
230 V
400 V
400 V
400 V
Rated frequency
50 Hz
50 Hz
50 Hz
50 Hz
50 Hz
50 Hz
810 W
920 W
1140 W
1410 W
1900 W
2170 W
Current consumption
4,3 A
1,75 A
5,5 A
3,2 A
4,5 A
5,2 A
Starting current
16,5 A
9,3 A
40 A
11,5 A
15 A
18,7 A
DTS-Ex 7641
DTS-Ex 7741
approx. 89 kg
approx. 89 kg
Voltage range
Power consumption at A35 / A35
Supplementary data
DIN IEC 60038
DTS-Ex 7341
DTS-Ex 7541
Height
1804 mm
Width
474,5 mm
Depth
Weight (without packaging)
Orientation
Unit construction
Connection for scavenging air
System of protection
Standard scope of supply
46
450 mm
approx. 79 kg
approx. 85 kg
approx. 79 kg
approx. 89 kg
vertical
stainless steel, aluminium
screw connection with cutting-ring for pipe Ø 22 mm with BSPP inside thread of pipe 1/2“
IP 65 against the enclosure (EN 60529), when used as recommended
IP 55 against the ambience (EN 60529), when used as recommended
operating instructions, technical datasheet, installation kit incl. plug-in connector
We reserve the right to technical alterations.Subject to correction. 075000053
Electrical data
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
450
389
DTS-Ex 7x41
ambient air
outlet
ambient air
intake
1804
warm air
intake
cold air
outlet
474,5
303
We reserve the right to technical alterations.Subject to correction. 075000053
Explosions are a potential danger wherever flammable gases,
vapours, liquids or powders can mix with oxygen or any other
reactive gas. This kind of risk is present in locations, e.g. in the
petrochemical and chemical industries, at tank storage facilities or on offshore oil platforms. But even facilities such as
grain silos and paint workshops are susceptible to the dangers
of explosions.
Explosions are a hazard for both man and his environment,
that is why measures were implemented on an international
scale. Measures designed to help in preventing explosions or
minimising their impact. With the introduction of the newly
developed DTS-Ex7x41 range of EExp cooling units, for the
first time system solutions are now available for applications
inside EEX p enclosures with pressurised encapsulation in
potentially explosive areas designated as categories 2G and
3G.
It is now possible to safely use switchgear and control
system components without explosion proof protection in
potentially explosive environments.
The EEX p models provide a high degree of reliability and
availability for machines and systems used for complex
applications in potentially explosive environments.
47
Enclosure cooling units for top-mounting:
3000 W
temperature regulated by integrated thermostat
high air volume in internal and external circulation
sealing gasket protection against water leakage
IP 54
Max. distance
between air inlet
and -outlet
Cooling capacity (A 35 / A 35)*
Cooling capacity (A 50 / A 35)*
Type of refrigerant
Amount of refrigerant
Thermostat setting
Overlap
Flow volume (actual)
– Condenser airflow
– Evaporator airflow
Noise level (3m distance)
Duty cycle
Refrigeration
capacity according to EN 814
*
Electrical data
Rated voltage
Rated frequency
Voltage range
Power consumption (A 35 / A 35)
Current consumption (A 35 / A 35)
Starting current
Internal control voltage
Supplementary data
Weight (without packaging)
Orientation
Unit construction
Corrosion protection
Colour
Insulation
Climatic data
System of protection
Standard scope of supply
Approvals
48
Suitable for both
50 Hz and 60 Hz
Level of protection
Optional extra
in respect of enclosure
(EN 60529)
DTD 5501
3000 Watt
2400 Watt
R 134a
1650 g
adjustable within a range of 25 °C to 45 °C (factory-set at 35 °C)
4K
1300 m3 / h
720 m3 / h
75dB (A)
100 %
DTD 5501
400 V / 440 V
50 / 60 Hz / 60 Hz
360 V ... 440 V / 396 V ... 484 V
1900 Watt
4,5 A
15 A
230 V
DTD 5501
73 kg
horizontal
sheet steel
galvanized/electrostatically powder-coated (200°C)
RAL 7035, RAL 7032; other colours available on request
according to EN 60529
max. ambient temperature + 55 °C
max. relative humidity 80 %, A 35 / A 35 (EN 814)
IP 54 against the enclosure (EN 60529), when used as recommended
IP 34 against the ambience (EN 60529), when used as recommended
ready for connection to mains with 2 m power cable,
sealing material, fixing material, 1 m PVC-tube for condensate drain,
technical datasheet and operating instructions
see overview cooling units / approvals
We reserve the right to technical alterations.Subject to correction. 075000053
Refrigeration data
Eyebolts
installation
V2A
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
DTD 5501
air outlet to ambient
475
ambient
air intake
cold air into enclosure
465
warm air from enclosure
720
condensate drain, outside-Ø 12 mm
Characteristic curves: DTD 5501 –
Effective refrigeration capacity
Installation cutout
720
20
330
330
41
refrigeration
capacity Q0 [Watt]
temperature inside
enclosure Ti
4000
We reserve the right to technical alterations.Subject to correction. 075000053
3000
434
Ø 230
+45°C
+35°C
+25°C
2000
206.5
1500
R30
1000
500
154
128
568
15.5
465
2500
425
alle unbemaßten Bohrungen Ø 8 mm
3500
25
35
45
55 Tu (°C)
ambient air temperature
49
Enclosure cooling units for top-mounting:
1700 W, 1150 W and 810 W
temperature regulated by integrated thermostat
high air volume in internal and external circulation
sealing gasket protection against water leakage
V2A
IP 54
Max. distance
between air inlet
and -outlet
Coutout
compatibility
Refrigeration data
Cooling capacity (A 35 / A 35) *
Cooling capacity (A 50 / A 35) *
Type of refrigerant
Amount of refrigerant
Thermostat setting
Overlap
Flow volume (actual)
– Condenser airflow
– Evaporator airflow
Noise level (3 m distance)
Duty cycle
Eyebolts
installation
Suitable for both
50 Hz and 60 Hz
(not for
DTD 5301/230V)
DTD 5201
1150 Watt (1100 W / 115 V)
850 Watt
R 134a
580 g
adjustable within a range of 25 °C to 45 °C (factory-set at 35 °C)
4K
Optional extra
Level of protection
in respect of enclosure
(EN 60529)
DTD 5301
1700 Watt (1600 W / 230 V; 1400 W / 115 V)
1250 Watt (1200 W / 230 V; 1150 W / 115 V)
DTD 5101
810 Watt
650 Watt
580 g
530 g
760 m3 / h
500 m3 / h
72 dB (A)
760 m3 / h
500 m3 / h
72 dB (A)
450 m3 / h
270 m3 / h
63 dB (A)
100 %
* Refrigeration capacity according to EN 814
Rated voltage
Rated frequency
Voltage range
Power consumption (A35/A35)
Current consumption (A35/A35)
Starting current
Internal control voltage
Supplementary data
Weight (without packaging)
Orientation
Unit construction
Corrosion protection
Colour
Insulation
Climatic data
System of protection
Standard scope of supply
Approvals
50
400V/440V
50 / 60 Hz / 60 Hz
360 V… 440 V /
386 V… 484 V
1200 Watt
1,5A
9A
230V
DTD 5301
230V
50Hz / 60 Hz
115V
60Hz
198V…252V
104V…127V
900 Watt
6,5A
19,5A
1200 Watt
14,6A
28A
DTD 5301
50kg
DTD 5201
230V
50Hz
60Hz
198V...252V
900 Watt
4,0A
13,7A
840 Watt
5,2A
18,5A
115V
60Hz
DTD 5101
230V
115V
50Hz/60Hz
60Hz
104V...127V
198V...252V
104V…127V
780 Watt
7,7A
24,9 A
560 / 610 Watt
3,0A
9,2A / 9,8A
610 Watt
6,8A
22,0A
DTD 5201
45kg
horizontal
sheet steel, stainless steel cover on request
galvanized/electrostatically powder-coated (200°C); on request: stainless steel cover (DTD 5301)
RAL 7035, RAL 7032; other colours available on request
according to EN 60529
max. ambient temperature +55°C
max. relative humidity 80%, A35/A35 (EN 814)
IP54 against the enclosure (EN 60529), when used as recommended
IP34 against the ambience (EN 60529), when used as recommended
ready for connection to mains with 2 m power cable,
sealing material, fixing material, 1 m PVC-tube for condensate drain,
technical datasheet and operating instructions
see overview cooling units / approvals
DTD 5101
40kg
We reserve the right to technical alterations.Subject to correction. 075000053
Electrical data
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
DTD 5301, DTD 5201 and DTD 5101
air outlet to ambient
405
ambient air
intake
cold air into enclosure
warm air from enclosure
Installation cutout
600
16
15
61
159
390
Ø 230
358
41
268
360
270
R30
390
270
600
144
467
condensate drain, outside-Ø 12 mm
only drill if enclosure depth 400 mm
all drill holes without dimension Ø 8 mm
Characteristic curves: DTD 5301, DTD 5201 and DTD 5101 – Effective refrigeration capacity
refrigeration
capacity Q0 [Watt]
DTD 5301 temperature inside
enclosure Ti
refrigeration
capacity Q0 [Watt]
DTD 5201 temperature inside
enclosure Ti
refrigeration
capacity Q0 [Watt]
2500
2500
2500
2000
2000
2000
1500
1500
1500
+45°C
+35°C
+25°C
1000
500
25
+45°C
+35°C
+25°C
1000
500
35
45
55 Tu (°C)
ambient air temperature
25
35
45
55 Tu (°C)
ambient air temperature
DTD 5101 temperature inside
enclosure Ti
1000
+45°C
+35°C
+25°C
500
25
35
45
55 Tu (°C)
ambient air temperature
51
We reserve the right to technical alterations.Subject to correction. 075000053
105
Accessories for cooling units:
Condensate Evaporation KV DTX
high performance evaporation with self regulation
easy to retrofit on any cooling unit
quality: stainless steel enclosure corrosion-resistant
fail-safe: without mechanical components
energy-saving: automatic power adjustment
universal: voltage range between 230V–115V and 50/60 Hz
Please note that the DTx 9000 series devices (with the exception of
DTx 9031) can be delivered with an integrated evaporation device
already fitted.
230 V
V2A
115 V
115 V … 230 V
Technical data
Suitable for both
50 Hz and 60 Hz
KV DTX
400 ml
self adjusting heating element
Max. condensation absorption volume
Heating source
Electrical data
Supplementary data
Mechanical data:
238
6
KV DTX
85 mm
263 mm
102 mm
1,2 kg
horizontal
bowl stainless steel, enclosure brushed stainless steel
The condensate evaporation is installed horizontally underneath the cooling unit (minimum distance 60 mm).
The condensate hose should reach minimum 20 mm into the opening of the condensate evaporation.
The plastic plug to seal the mains connection must be pressed in a 20 mm in diameter drilling
in the sheet metal. A drilling template is attached to the condensate evaporation.
The power supply cord is provided by the customer.
Height
Width
Depth
Weight
Orientation
Construction material
Assembling instruction
70
85
Ø6
262
52
101
We reserve the right to technical alterations.Subject to correction. 075000053
KV DTX
230 V / 115 V
50/60 Hz
100 V … 240 V
20 – 115 W
0,8 A (115 V) / 0,5 A (230 V)
1,3 A
Rated voltage
Rated frequency
Voltage range
Power consumption
Current consumption
Starting current
ELECTRO-TECHNOLOGY FOR INDUSTRY
Accessories for Cooling Units:
Filter mats for cooling units
Pfannenberg cooling units require a minimum of service. All our cooling units are delivered
without filter mats.
If the cooling unit is intended for applications in harsh conditions you can insert filter mats
into the air intake grill. Because we make use of our PFA exhaust filters, inserting, changing
and cleaning filter mats is implicity itself.
Filter attachment for DTD
Special versions with filter attachment are available for our DTD 5501/5301 top-mounted cooling units.
Aluminium filter for DTS/DTI
Aluminium filters for applications in oily environments are available for our doorand side-mounted units.
Simply open the air intake grill and insert the filter. The filter is washable.
Available for
all standard models except DTS 7041, DTS 7061 and DTS 7001
DTI 9x41 PFA
Protective edging for DTS
We use a protective edging to seal the gap between the cooling unit and the enclosure.
This ensures that the edge of the cutout is not only sealed but also mechanically protected.
The cutout is covered and requires no further work. We also supply the protective edging
by the metre for use on cutouts for other cooling units.
Condensate bottle KF DTX
For collecting condensate to be obtained.
- support of stainless steel
- easy installation at enclosure below the cooling unit
- max. collecting volume 1000 mll
4,5
We reserve the right to technical alterations.Subject to correction. 075000053
50
2x Ø
80
213,5 mm
max. 50 mm
Support :
90
53
Innovative cooling concept
Peltier cooling units from Pfannenberg
Diagram representation of a Peltier unit
In order to achieve useful cooling capacity, several elements must be brought together in one Peltier cool block.
Defect electron stream
Electron stream
p
n
IB
+
1) cold contact bridges
2) warm contact bridges
3 + 4) side piece made of endowed semi-conducting material
The Peltier effect is one of three thermo electrical effects, and describes the creation of a temperature difference by an electrical current.
It occurs when two different metals (or semi-conductors) are connected with one another at two points and an electrical current flows
through them. The current causes heat transfer from one junction to
another, depending on the current’s strength and direction. In the
Peltier device this effect has a technical use.
Cooling devices which are based
on Peltier technology are, as far as
possible, maintenance free and
have no moving parts in the actual
cooling circuit which makes this
very reliable and long lasting.
Not forgetting the low noise level
by the removal of the otherwise
needed compressors.
2
3
4 1
2
This discovery was published by Jean Peltier already in 1834. In the 60s
and 70s intensive research was made on materials with good thermoelectric characteristics. In particular the ban on coolants containing
CFCs gave increased impetus to the development because, as opposed
to traditional cooling, no liquids/gases are used but endowed semiconductors.
The advantages at a glance:
compact design, which plays a decisive roll in particular for the panel cooling area
by pole reversal the heat current is converted, from cooling to heating
assembly in any desired location is possible whether on the side or on the roof, there are no limitations
use in moving units, e.g. crane systems, transportation, vehicles, or even in wind power units is
possible
no vibration due to compressor
low noise emissions
environmentally safe due to removal of refrigerant
as far as possible maintenance free
Peltier cooling units are particularly suitable for the following applications:
54
air conditioning of small switch cabinets, control panels or operator enclosure
cooling moveable, mobile enclosures
use on traffic and environment measuring technology
cooling of vibration sensitive devices because there is no compressor to kick in
We reserve the right to technical alterations.Subject to correction. 075000053
IB
–
Peltier cooling units PTM:
100 W, 150 W and 500 W
ELECTRO-TECHNOLOGY FOR INDUSTRY
high-capacity performance in compact design
especially suitabe for small enclosures, like e.g. panel- and
table enclosures
suitable for any fitting position
integrated electronic, free positioning of the temperature sensor
temperature display
setting of requested temperature by push button
in each case, 3 different variants are available:
H = horizontal installation
T = top-mounting
V = vertical installation
the variants differ in the alignment of the temperature display
as well as in the internal condensate pan
AC
IP 54
Level of protection
in respect of
enclosure
(EN 60529)
Refrigeration capacity
Ambient air temperature
Temperature inside enclosure
Air volume, external circuit
Air volume, internal circuit
Condensate discharge
Electrical data:
Rated voltage
Rated frequency
Voltage range (according to DIN IEC 38)
Power consumption
Current consumption
Starting current
Power supply cable
Sensor cable
Supplementary data:
Height
Width
Depth with cover
Installation depth
Weight
Construction material
Corrosion protection
System of protection
PTM 100-H / PTM 100-V / PTM 100-T PTM 150-H / PTM 150-V / PTM 150-T
100 W
150 W
- 40 °C (- 40 °F) ... + 50 °C (+ 122 °F) - 40 °C (- 40 °F) ... + 50 °C (+ 122 °F)
0 °C (+ 32 °F) ... + 50 °C (+ 122 °F)
0 °C (+ 32 °F) ... + 50 °C (+ 122 °F)
156 m3 /h
234 m3 /h
3
76 m /h
114 m3 /h
condensate drain
PTM 500-H / PTM 500-V / PTM 500-T
500 W
data on request
data on request
data on request
data on request
PTM 100-H / PTM 100-V / PTM 100-T PTM 150-H / PTM 150-V / PTM 150-T
PTM 500-H / PTM 500-V / PTM 500-T
24 V
24V
220 V
24 V
DC
DC
50 / 60 Hz
DC
21,6V – 26,4V
21,6V – 26,4V
198 V - 242 V
21,6V – 26,4V
102 W
240 W
data on request
6A
16 A
data on request
5,15 A
12,4 A
data on request
terminal block, max. 2,5 mm2 / AWG 16
1200 mm (length outside of device)
PTM 100-H
181 mm
367 mm
151 mm
75 mm
We reserve the right to technical alterations.Subject to correction. 075000053
Refrigeration data:
DC
Partially recessed
installation
PTM 100-V PTM 100-T PTM 150-H PTM 150-V PTM 150-T
PTM 500-H / PTM 500-V / PTM 500-T
367 mm
181 mm
181 mm
495 mm
181 mm
data on request
181 mm
367 mm
495 mm
181 mm
495 mm
data on request
151 mm
151 mm
151 mm
151 mm
151 mm
data on request
75 mm
75 mm
75 mm
75 mm
75 mm
data on request
6,7 kg
9,16 kg
data on request
sheet steel
galvanized/electrostatically powder-coated (200°C)
IP54 (EN 60529) against the enclosure, when used as recommended
IP 24 (EN 60529) against the ambience, when used as recommended
55
Mechanical data:
PTM 100
PTM 150
151
130 [5.12"]
151
150 [5.91"]
76
70 [2.76"]
76
70 [2.76"]
495
422
[16.61"]
367
181
159 [6.26"]
181
159
[6.26"]
297 [11.69 ]
Installation cutout
Wiring
PTM 100
24V
DC
24V DC
367 367
[14.45 ]
1616
[0.63"]
7575
[2.95"]
5 [0.2"]
5
power cable
+ -
PTM 100:
Aussenkontur/ Outline/
Contur/ Profilo
temperature
sensor
PTM 100-H
PTM
100-H
[11.85"]
301301
3232
[1.26"]
18 18
[0.71"]
310310
[12.2"]
2323
[0.91"]
PTM 150
495
495 [19.49"]
16 [0.63"]
75
5
PTM 150:
16
75 [2.95"]
Aussenkontur/ Outline/
device
contour
Contur/
Profilo
18
56
95
95 [3.74"]
15
425
4 x Ø6
4xØ6 [Ø0.24"]
18 [0.71"]
PTMPTM150-H*
150-H
15 [0.59"]
PTMPTM150-V
*
150-V
120 [4.72"]
120
181 [7.13"]
181
1212
[0.47"]
10
10 [0.39"]
5 [0.2"]
425 [16.73"]
36
36 [1.42"]
435
435 [17.13"]
26
26 [1.02"]
* orientation: this side up
We reserve the right to technical alterations.Subject to correction. 075000053
4 x[Ø0.24"]
Ø6
4xØ6
15 15
[0.59"]
95 95
[3.74"]
PTM 100-V
PTM
100-V
12 12
[0.47"]
120
120 [4.72"]
181181
[7.13"]
10 10
[0.39"]
device contour
TS1
TS1
ELECTRO-TECHNOLOGY FOR INDUSTRY
State-of-the-art, environmental
measurement and testing centre
+70°C
-45°C
We reserve the right to technical alterations.Subject to correction. 075000053
As a sign of their commitment to customer quality, Pfannenberg have
one of Europe’s most modern, state-of-the-art, environmental, measurement and testing centres.
With an area of some 60 m2, they have at their disposal the latest test
equipment available to meet customer demands in the field of climate
control.
For Pfannenberg, it is merely a small matter to progress from an arctic
temperature of – 45°C to the desert heat of + 70 °C. In this way, they
can test all devices ranging from prototypes to series-manufactured
products under extreme climatic conditions and ensure compliance
with qualification standards. The entire environmental chamber is
divided into two environmental cells of equal proportions, allowing
simultaneous measurement of low-powered devices.
High-powered equipment, i. e. 15 kW, is mounted on a partition wall
between the two environmental cells, whereby one side of the chamber
represents the customer’s installation room and the other simulates
environmental conditions.
The environmental chamber is conditioned by means of a two-stage,
indirect cooling agent, with a salt water content of 3.5 m3 in each stage.
It is possible to measure and test any item of equipment in terms of performance and technical operation at a temperature ranging from – 45 °C
up to + 70 °C in a simulated relative humidity of up to 99%.
High-quality precision instruments for a range of capacities are available
to record measurement data, with a PC-based EDP system for test and
measurement documentation.
57
Cooling solutions for all branches of
the industry
The demands placed on industrial products require a high level of system integration. The functions of the individual system components must be
finely-tuned to ensure the safe overall function of the device.
For these reasons, Pfannenberg already began to broaden the spectrum in the area of cooling technology several years ago, in order to provide
our customers with solutions for varying demands.
Several new areas have developed since the machine tool building market first came
into being.
In addition to tool spindles and linear motors, cooling units are increasingly being
used alongside other central components, to name but a few
- laser sources
- x-ray systems
- frequency converters
For further information, please request
- brakes, hydraulic
the catalogue for this product group.
- various kinds of motors
In addition, the harsh environmental and temperature conditions that dominate many parts of the
world must be taken into account. This is worth bearing in mind, as excess heat causes malfunctions, reduces the lifespan and eventually results in the complete failure of production machines.
Pfannenberg’s chillers are the best way to meet these challenges, capable of fulfilling all these
requirements with ease.
Designed on demand, based on varying platforms (housing concepts), our products succeed in
cooling the central production parts to a constant temperature, regardless of the environmental
conditions and ambient temperature. Various liquids are used to remove the heat safely from the
affected areas. Generally, these consist of water + additive, which may be various oils, emulsions
from water/oil or de-salted/de-ionised water.
58
We reserve the right to technical alterations.Subject to correction. 075000053
With several factories, Pfannenberg is a manufacturer that offers a complete range of products for its customers. This is combined with our
continuous quality, function and reliability with regard the necessary manufacturing processes. In line with today’s standards, the concept behind
this system is not simply limited to the product, but rather includes the technical and performance environment. We approach our customers with
this perspective, advise them, and work on joint concepts for solutions to the tasks at hand.
System Cooling from
Pfannenberg
ELECTRO-TECHNOLOGY FOR INDUSTRY
The chiller is the core component in the following discussions on system cooling.
The air/water heat exchanger is also an important cooling component in complex environments.
The air/water heat exchanger is used in areas dominated by high
ambient temperatures, and oily or destructive atmospheres.
An additional advantage of this heat exchanger over other
systems is its maintenance-free operation and low noise pollution.
Air/water heat exchangers are essentially quite simply constructed. The heat transmission occurs by means of a lamellar heat
exchanger, consisting of copper pipes and aluminium lamellae.
Air circulation occurs by means of a powerful radial fan.
The fan sucks the warm air from the electronic enclosures and
transfers it using the heat exchanger. This cools the air, which is
then returned to the enclosure. The cooling fluid fed in from outside is pumped through the heat exchanger.
The heat energy is removed from the electronic enclosure and
absorbed by the cooling fluid. The thus heated cooling fluid transports the heat energy to a chiller unit, where the cooling fluid is
cooled down and the cycle begins once more.
Enclosure
Maximum clearance between the inflow and outflow provides
optimum distribution of temperature inside the enclosure.
Pfannenberg’s air/water heat exchanger has several options on offer:
We reserve the right to technical alterations.Subject to correction. 075000053
various positions for connecting cooling fluids
various connection systems for cooling fluids
available with or without controls, with or without fault display
various RAL/NCS colours (on request)
various connection voltages/currents
stainless steel pipes
59
Water and oil chillers - a wide variety of performance is
available, from 1,1 up to150kW, in this high quality series
Customer benefits:
G UL version is available for various series
G extensive choice of options available to suit
your individual requirements
G each and every unit is suitable for stand-alone chilling.
Simply plug in and chill!
Technical features:
G perfect protection using separate installation of electronic
components and the cooling circuit – optimum protection in
inclement conditions
G for further information please order our catalogue:
“Chillers for industrial use”
G standard colour RAL 7035, other colours on request
Chiller - line up to 2,4 kW - refrigerant water
Optionals:
G
G
G
G
G
G
G
G
Serie – Rack
Capacity*
Voltage
Dimensions
Weight
pump with different capacities
high and low water temperature alarm
connecting plug
electrical thermostat with digital display
hydraulik by pass with manometer
wheels
water flow switch
UL conformity
1100
1100 W
230 V 50/60 Hz
1700
1700 W
230 V 50/60 Hz
2400
2400 W
230 V 50/60 Hz
D 580 x W 580 x H 495
48 kg
D 450 x W 480 x H 395
42 kg
Optionals:
G
G
G
G
G
G
G
G
Serie – EB
Capacity*
pump with different capacities
viton gasket
electrical water level
diagnostic module
hydraulik by pass
wheels
water flow switch
UL conformity
differential thermostat
high and low water temperature alarm
electric water heater
hot gas by pass valve
connecting plug
aluminium filter
other colours available
time delay switch
43
60
75
90
130
4300 W
6000 W
7500 W
9000 W
13000 W
230 V 50 Hz
3x400V 50Hz Voltage
230 V 60 Hz
3x400V 50Hz - 3x460V 60Hz
3x460V 60Hz
3x400V 50Hz - 3x460V 60Hz
Dimensions
D 600 x W 550 x H 1000
D 750 x W 700 x H 1345
Weight
95 kg
120 kg
150 kg
160 kg
180 kg
180 kg
Temperature range +5°C to +43°C, * range of operation +10 °C to +35 °C capacity values are based on a water temperature Tw = 18°C and an ambient temperature Ta = 32°C
60
30
3000 W
230 V 50 Hz
230 V 60 Hz
3x400V 50Hz - 3x460V 60Hz
G
G
G
G
G
G
G
G
We reserve the right to technical alterations.Subject to correction. 075000053
Chiller - line up to 9 kW - refrigerant water + additive
ELECTRO-TECHNOLOGY FOR INDUSTRY
Chiller - line up to 15 kW - refrigerant oil
Optionals:
G
G
G
G
G
G
G
G
Serie – GDV
Capacity
Voltage
35
1500 W
400 V
50 Hz
Dimensions
Weight
40
2200 W
400 V
50 Hz
43
3000 W
400 V
50 Hz
D 530 x W 650 x H 925
85 kg
G
G
G
G
G
G
G
pump with different capacities
version without pump
version with tank
oil flow switch
oil filter
maximum pressure valve
differential thermostat
high and low oil temperature alarm
100 kg
45
4200 W
400 V
50 Hz
50
6000 W
400 V
50 Hz
D 530 x W 830 x H 925
105 kg
140 kg
145 kg
electric oil heater
connecting plug in various versions
hot gas by pass valve
other colours available
special power supply
60 Hz on request
time delay switch
60
7500 W
400 V
50 Hz
65
9000 W
400 V
50 Hz
D 630 x W 930 x H 1125
180 kg
185 kg
90
13000 W
400 V
50 Hz
D 700
W 1200
H 1190
240 kg
150
15000 W
400 V
50 Hz
D 700
W 1200
H 1370
260 kg
Indoor / Outdoor Chiller - line 12 kW up to 150 kW
Optionals:
G
G
G
G
G
G
G
G
Serie – HK
Capacity
Voltage
Dimensions
Weight
oil version on customer specification
oil filter
maximum pressure valve
differential thermostat with sensor
heater
connectors for electrical connections
other colours (RAL) available
time delay switch
12
15
20
25
33
40
55
62
70
12 kW
15 kW
20 kW
25 kW
33 kW
40 kW
55 kW
62 kW
70 kW
3x400V 50Hz - 3x400V 50Hz - 3x400V 50Hz - 3x400V 50Hz - 3x400V 50Hz - 3x400V 50Hz - 3x400V 50Hz - 3x400V 50Hz - 3x400V 50Hz 3x460V 60Hz 3x460V 60Hz 3x460V 60Hz 3x460V 60Hz 3x460V 60Hz
3x460V 60Hz 3x460V 60Hz 3x460V 60Hz 3x460V 60Hz
D 800 x W 1500 x H 1753,5
D 900 x W 2150 x H 1565,5
D 1100 x W 2500 x H 1781
484 kg
484 kg
484 kg
484 kg
734 kg
734 kg
1081 kg
1081 kg
1081 kg
Optionals:
G
G
G
G
G
G
G
G
Serie – AR
Capacity
Voltage
Dimensions
Weight
pump with different capacities
viton gaskets
electrical fluid level
hot gas by pass valve
hydraulik by pass
differential thermostat
fluid flow switch
high and low fluid temperature alarm
10
12
10000 W
12000 W
3x400V 50Hz - 3x460V 60Hz
3x400V 50Hz - 3x460V 60Hz
D 600 x W 1000 x H 2000
250 kg
265 kg
G
G
G
G
G
G
We reserve the right to technical alterations.Subject to correction. 075000053
Chiller for recessed installation - line up to 18 kW
electric fluid heater
other colours available
special power supply
aluminium filter
time delay switch
connecting plug
15
18
15000 W
20000 W
3x400V 50Hz - 3x460V 60Hz
3x400V 50Hz - 3x460V 60Hz
D 800 x W 1000 x H 2000
280 kg
510 kg
61
Air/Water Heat Exchanger:
10.000W and 7.000 W for side-mounting
NEW!
high air flow rate
compact design
suitable for external installation
thermostat and solenoid valve for temperature control
integrated temperature monitoring system with alarm contact
sealed: no extra work on the installation cutout necessary
maintenance free
IP 55
Max. distance
between air inlet
and -outlet
Cooling capacity at W10/A35 – nominal conditions*
Air volume (free-flow)
Water volume
Water intake temperature
Air intake temperature
Noise level (3m distance)
Thermostat setting
Condensate discharge
PWS 71002
10.000 W
4600 m3 /h
Electrical data
Supplementary data
Weight (without packaging)
Connection to water supply
Orientation
Construction material
Colour
Electric shock protection
Climatic data
System of protection
Standard scope of supply
Temperature monitoring
Alarm contact
Approvals
62
System of
protection
PWS 7702
7.000 W
4050 m3 /h
500l/h
10°C (> +1°C – +35°C)
+35°C
< 66dB (A)
=
<
= 63dB (A)
adjustable within a range of +8°C – + 50°C, factory-set + 35°C
drip pan with safety overflow
Duty cycle
Admissable operating pressure
water
intake temperature +10°C (W10), sir intake temperature +35°C, water volume= 500 l/h /
*
Rated voltage
Rated frequency
Voltage range (according to DIN IEC 38)
Power consumption
Current consumption
Starting current
Type of connection
Primary fuse T
Suitable for both
50 Hz and 60 Hz
100%
1 – 10 bar
** free-flow
PWS 71002
PWS 7702
400 V
50Hz
50Hz/60Hz
360V...440V
705 W
1,83A
7,3A
555 / 790 W
1,61/ 1,64A
6,4 / 6,6A
plug-in connector
10A
PWS 71002
PWS 7702
98 kg
75 kg
13 mm hose nipple, special connections available on request
vertical
sheet steel
RAL 7035, RAL 7032, other colours available on request
according to EN 60529
max. ambient temperature +70 °C / max. relative humidity 90%
IP 55 (EN 60529) against the enclosure, when used as recommended, IP 65 on request
incl. sealing material, fixing material, operating instructions. Connection to water supply with inside taper
integrated thermostat with changing contact, capacity 16 A, adjustable range + 8°C – + 50°C
10 K using setpoint
see overview cooling units / approvals
We reserve the right to technical alterations.Subject to correction. 075000053
Refrigeration data
Min. unit depth
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
PWS 7702
PWS 71002
300
310
air in from
enclosure
air in from
enclosure
600
1800
1800
460
air out from
exchanger
air out from
exchanger
return line supply line
Ø 12
1/2”
return line supply line
condensate drain
condensate drain
Ø 12
1/2”
Installation cutout
530
500
530
442,5
525
15
outside mounting
500
370
442,5
410
450
1200
370
442,5
1270
14 x Ø 8
1800
1250
1800
433,5
265
10000
9000
Ti = 45°C
6000
600 ltr. / h
400 ltr. / h
200 ltr. / h
We reserve the right to technical alterations.Subject to correction. 075000053
11000
115
145
12000
8000
450
600
PWS 71002
Effective refrigeration capacity Q0 [Watt]
Effective refrigeration capacity Q0 [Watt]
Characteristic curves: PWS7702 and PWS 71002 - Effective refrigeration
capacity
PWS 7702
7000
400
442,5
350
460
530
15
210
410
80
350
500
16000
15000
14000
13000
12000
Ti = 45°C
11000
10000
9000
8000
5000
7000
4000
Ti = 25°C
Ti = 35°C
Ti = 35°C
6000
Ti = 25°C
5000
3000
5
10
15
20
25
30
35
water intake temperature Ta [°C]
4000
5
10
15
20
25
30
35
water intake temperature Ta [°C]
63
Air/Water Heat Exchanger:
5000 W for side-mounting
high air flow rate
compact design
suitable for external installation
thermostat and solenoid valve for temperature control
integrated temperature monitoring system with alarm contact
sealed: no extra work on the installation cutout necessary
maintenance free
IP 55
Cutout
compatibility
Refrigeration data
Max. distance
between air inlet
and -outlet
Min. unit depth
Suitable for both
50 Hz and 60 Hz
System of
protection
Outside
installation
PWS 7502
5200 W
1670m3 /h
400l/h
+10°C (> +1°C – +35°C)
+35°C
adjustable within a range of +8°C – +50°C, factory-set +35°C
57dB (A)
drip pan with safety overflow
100%
1 – 10 bar
Cooling capacity at W10/A35 – nominal conditions*
Air volume (free-flow)
Water volume
Water intake temperature
Air intake temperature
Thermostat setting
Noise level (3m distance)
Condensate discharge
Duty cycle
Admissable operating pressure
* water intake temperature +10°C (W10), air intake temperature +35°C, water volume= 400 l/h
Electrical data
PWS 7502
230V
50Hz/60Hz
198V...252V
295/385 W
1,3/1,7A
5,8/6,6A
115 V
60 Hz
104V...127V
384 W
3,45A
8,33 A
plug-in connector
6A
** other voltages available on request
Supplementary data
Weight (without packaging)
Connection to water supply
Orientation
Construction material
Colour
Electric shock protection
Climatic data
System of protection
Standard scope of supply
Temperature monitoring
Alarm contact
Approvals
64
PWS 7502
39 kg
13 mm hose nipple, special connections available on request
vertical
sheet steel, enclosure stainless steel 1.4301 (240 corundum) available on request
RAL 7035, RAL 7032, other colours available on request
according to EN 60529
max. ambient temperature +70 °C / max. relative humidity 90%
IP 55 (EN 60529) against the enclosure, when used as recommended, IP 65 on request
incl. sealing material, fixing material, operating instructions. Connection to water supply with inside taper
integrated thermostat with changing contact, capacity 16 A, adjustable range + 8°C – + 50°C
10 K using setpoint
see overview cooling units / approvals
We reserve the right to technical alterations.Subject to correction. 075000053
Rated voltage**
Rated frequency
Voltage range according to DIN IEC38
Power consumption
Current consumption
Starting current
Type of connection
Primary fuse T
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
PWS 7502
Installation cutout
outside mounting
350
242
15
460
455
410
711,5
455
1400
440
air in from
enclosure
Ø8
433,5
180
455
air out from
exchanger
Ø 12
return line
condensate drain
supply line
420
350
Characteristic curves: PWS7502 - Effective refrigeration capacity
8000
7000
We reserve the right to technical alterations.Subject to correction. 075000053
Effective refrigeration capacity Q0 [Watt]
600 ltr. / h
400 ltr. / h
200 ltr. / h
6000
Ti = 45°C
5000
4000
Ti = 35°C
3000
2000
Ti = 25°C
1000
0
5
10
15
20
25
30
35
water intake temperature Ta [°C]
65
PWS 7332-L
cutout compatible
with DTS 9x41 range
see page 18
Air/Water Heat Exchanger:
3000 W and 1500 W for side-mounting
NEW!
high air flow rate
compact design
suitable for external installation
thermostat and solenoid valve for temperature control
integrated temperature monitoring system with alarm contact
sealed: no extra work on the installation cutout necessary
maintenance free
long air passage (PWS 7332 L)
cutout compatible with DTS 9x41 range (PWS 7332 L)
heat exchanger tubes are available in stainless steel (PWS 7332)
IP 55
Max. distance
between air inlet
and -outlet
Min. unit depth
Suitable for both
50 Hz and 60 Hz
Refrigeration data
PWS 7332
PWS 7332 L
Cooling capacity at W10/A35 *
3150 W
3150 W
Air volume (free-flow)
1670m3 /h
1670m3 /h
Water volume
200l/h
Water intake temperature
10°C (> +1°C – +35°C)
Air intake temperature
+35°C
Thermostat setting
adjustable within a range of +8°C – +50°C, factory-set +35°C
Noise level (3m distance)
54dB (A)
54dB (A)
Condensate discharge
drip pan with safety overflow
Duty cycle
100%
Admissable operating pressure
1 – 10 bar
* nominal conditions: water intake temperature +10°C (W10), air intake temperature +35°C, water volume= 200 l/h
Electrical data
Rated voltage**
Rated frequency
Voltage range according to DIN IEC38
Power consumption
Current consumption
Starting current
Type of connection
Primary fuse T
** other voltages available on request
Supplementary data
Weight (without packaging)
Connection to water supply
Orientation
Construction material
Colour
Electric shock protection
Climatic data
System of protection
Standard scope of supply
Temperature monitoring
Alarm contact
Approvals
66
PWS 7332
230V
50Hz/60Hz
198V...252V
295 /385W
1,3 /1,7A
5,8 /6,6A
115 V
60 Hz
104V...127V
453 W
4,1A
8,62A
6A
16 A
PWS 7332
23 kg
PWS 7332 L
230V
115 V
50Hz/60Hz
60 Hz
198V...252V
104V...127V
295 /385W
453 W
1,3 /1,7A
4,1A
5,8 /6,6A
8,62A
plug-in connection at attached connector
6A
16 A
Outside and
inside installation
System of
protection
PWS 7152
1500 W
850m3 /h
53dB (A)
PWS 7152
230V
50Hz/60Hz
198V...252V
125 /185W
0,55 /0,75A
2A
115 V
60 Hz
104V...127V
186 W
1,5A
3,9A
4A
6A
PWS 7332 L
PWS 7152
35 kg
21 kg
13 mm hose nipple, special connections available on request
vertical
sheet steel, PWS 7332 and PWS 7152 with enclosure stainless steel 1.4301 (240 corundum) available on request
RAL 7035, RAL 7032, other colours available on request
according to EN 60529
max. ambient temperature +70 °C / max. relative humidity 90%
IP 55 (EN 60529) against the enclosure, when used as recommended, IP 65 on request
incl. sealing material, fixing material, operating instructions. Connection to water supply with inside taper
integrated thermostat with changing contact, capacity 16 A, adjustable range + 20°C – + 60°C
10 K using setpoint
see overview cooling units / approvals
We reserve the right to technical alterations.Subject to correction. 075000053
Cutout
compatibility
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
PWS 7152
PWS 7332
400
115
401
190
air in from
enclosure
PWS 7332 L
air in from
enclosure
air in from
enclosure
950
950
air out from
exchanger
air out from
exchanger
air out from
exchanger
217
1321
400
Ø 12
Ø 12
return line supply
line
condensate drain
return line supply
line
condensate drain
Installation cutout
condensate drain Ø 12
Installation cutout
280
outside mounting
inside mounting
,6
Ø6
return line supply
line
Installation cutout
280
outside mounting
,6
Ø6
401
463
450
240
904
904
700
280
37
350
340
270
315
290
220
0
R2
8xØ8
58
340
112
350
2400
Ti = 45°C
2000
1600
Ti = 35°C
1200
800
6500
6000
5500
5000
4500
4000
Ti = 45°C
3500
3000
2000
400
Ti = 25°C
1500
0
5
15
25
35
water intake temperature Ta [°C]
1000
7000
6000
5000
4000
Ti = 45°C
3000
2000
2500
Ti = 25°C
600 ltr. / h
400 ltr. / h
200 ltr. / h
PWS 7332 L
Effective refrigeration capacity Q0 [Watt]
Effective refrigeration capacity Q0 [Watt]
2800
600 ltr. / h
400 ltr. / h
200 ltr. / h
PWS 7332
Effective refrigeration capacity Q0 [Watt]
600 ltr. / h
400 ltr. / h
200 ltr. / h
PWS 7152
5
Ti = 35°C
15
25
35
water intake temperature Ta [°C]
Ti = 35°C
Ti = 25°C
1000
0
5
15
25
35
water intake temperature Ta [°C]
67
We reserve the right to technical alterations.Subject to correction. 075000053
Characteristic curves: PWS7152, PWS 7332 und PWS 7332 L - Effective refrigeration capacity
Air/Water Heat Exchanger:
1000W and 600 W for side-mounting
high air flow rate
compact design
suitable for external installation
thermostat and solenoid valve for temperature control
integrated temperature monitoring system with alarm contact
sealed: no extra work on the installation cutout necessary
maintenance free
IP 55
Cutout
compatibility
Refrigeration data
Max. distance
between air inlet
and -outlet
Min. unit depth
Suitable for both
50 Hz and 60 Hz
PWS 7102
950 W
570m3 /h
Cooling capacity at W10/A35 – nominal conditions*
Air volume (free-flow)
Water volume
Water intake temperature
Air intake temperature
Noise level (3m distance)
Thermostat setting
Condensate discharge
Duty cycle
Admissable operating pressure
System of
protection
Outside and
inside installation
PWS 7062
600 W
440m3 /h
200l/h
10°C (> +1°C – +35°C)
+35°C
≤48 dB (A)
adjustable within a range of +8°C – + 50°C, factory-set + 35°C
drip pan with safety overflow
100%
1 – 10 bar
* water intake tremperature +10°C (W10), air intake temperature +35°C, water volume= 200 l/h
Rated voltage**
Rated frequency
Voltage range (according to DIN IEC 38)
Power consumption
Current consumption
Starting current
Type of connection
Primary fuse T
** other voltages available on request
Supplementary data
Weight (without packaging)
Connection to water supply
Orientation
Construction material
Colour
Electric shock protection
Climatic data
System of protection
Standard scope of supply
Temperature monitoring
Alarm contact
Approvals
68
PWS 7102
230V
50Hz/60Hz
198V...252V
82/84 W
0,35/0,4A
1,7/1,95A
PWS 7062
115 V
230V
60 Hz
50Hz/60Hz
104V...127V
198V...252V
82 W
68/70 W
0,69A
0,35/0,38A
1,4A
1,5/1,8A
plug-in connection at attached connector
4A
115 V
60 Hz
104V...127V
60 W
0,65A
1,3A
PWS 7102
PWS 7062
7,5 kg
6 kg
13 mm hose nipple, special connections available on request
vertical
sheet steel, enclosure stainless steel 1.4301 (200 corundum) available on request
RAL 7035, RAL 7032, other colours available on request
according to EN 60529
max. ambient temperature +70 °C / max. relative humidity 90%
IP 55 (EN 60529) against the enclosure, when used as recommended, IP 65 on request
incl. sealing material, fixing material, operating instructions. Connection to water supply with inside taper
integrated thermostat with changing contact, capacity 16 A, adjustable range + 8 °C – + 50°C
10 K using setpoint
see overview cooling units / approvals
We reserve the right to technical alterations.Subject to correction. 075000053
Electrical data
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
PWS 7062
PWS 7102
200
100
200
150
air in from
enclosure
500
500
air in from
enclosure
air out from
exchanger
Ø 12
condensate drain
air out from
exchanger
Ø 12
return line supply line
150
10
Ø 6,6
inside mounting
15
465
440
outside mounting
150
Installation cutout
Ø 6,6
170
1100
Ti = 45°C
1000
900
800
700
600
500
Ti = 35°C
400
Effective refrigeration capacity Q0 [Watt]
Effective refrigeration capacity Q0 [Watt]
1200
600 ltr. / h
400 ltr. / h
200 ltr. / h
PWS 7102
600 ltr. / h
400 ltr. / h
200 ltr. / h
PWS 7062
We reserve the right to technical alterations.Subject to correction. 075000053
Installation cutout
return line supply line
condensate drain
2000
Ti = 45°C
1750
1500
1250
Ti = 35°C
1000
300
750
200
Ti = 25°C
Ti = 25°C
100
0
500
5
10
15
20
25
30
35
water intake temperature Ta [°C]
5
10
15
20
25
30
35
water intake temperature Ta [°C]
69
Air/Water Heat Exchanger:
2100 W and 1450 W for top-mounting
flat gasket to protect against water penetratian
via top of the enclosure
water circuit tested for 30 bar pressure
temperature regulated by integrated thermostat and
solenoid valve
10 bar operating pressure
tubes and heat exchanger are available in stainless steel
IP 54
Max. distance
between air inlet
and -outlet
Refrigeration data
Suitable for both
50 Hz and 60 Hz
PWD5402
2100 Watt
3400 Watt
720m3 /h
Cooling capacity at W20/A35 – nominal conditions*
Cooling capacity at W10/A35 – nominal conditions*
Air volume
Water volume
Water intake temperature
Air intake temperature
Noise level (1m distance)
Duty cycle
V4A
Level of protection
Optional extra
in respect of enclosure
(EN 60529)
PWD 5302
1450 Watt
2150 Watt
500m3 /h
400l/h
+20°C
+35°C
64dB (A)
54dB (A)
100%
* water intake temperature +20°C (W20) / +10°C (W10), air intake temperature +35°C, water volume= 400l/h
PWD5402
230 V
50Hz/60Hz
198V...252V
200Watt
0,84A
4A
400 V - 480 V ***
50Hz/60Hz
400 V - 480 V ± 10%
200 - 290 Watt
0,5 - 0,9 A
4A
PWD 5302
230 V
50Hz/60Hz
198V...252V
55 Watt
0,38A
3A
** other voltages available on request
*** rated voltage can be adjusted on the device within a range of 380-420 V (50 Hz) and 440-480 V (60Hz)
Supplementary data
Weight (without packaging)
Connection to water supply
Orientation
Construction material
Corrosion protection
Colour
Electric shock protection
Climatic data
System of protection
Standard scope of supply
Approvals
70
PWD5402
PWD 5302
30 kg
21 kg
13 mm hose nipple, special connections available on request
horizontal
sheet steel (stainless steel available on request)
galvanized / electrostatically powder-coated (200 °C)
RAL 7035, RAL 7032 (european grey), other colours available on request
according to EN 60529
max. ambient temperature + 60 °C
max. relative humidity 90 %
IP 54 against the enclosure (EN 60529), when used as recommended
connection to water supply with inside taper,
sealing material, fixing material, operating instructions
see overview cooling units / approvals
We reserve the right to technical alterations.Subject to correction. 075000053
Electrical data
Rated voltage**
Rated frequency
Voltage range
Power consumption
Current consumption
Starting current
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
Installation cutout
434
PWD5402
return line
15.5
206.5
720
supply line
720
air in from enclosure
air out from exchanger
568
330
190
154
41
Ø 230
330
condensate drain, outside-Ø 15 mm
465
128
R30
20
425
465
all drill holes without dimensions = Ø 8 mm
PWD5302
return line
358
600
16
159
supply line
600
condensate drain, outside-Ø 15 mm
61
390
360
R30
15
105
270
268
390
Characteristic curves see page 74
only drill if enclosure depth 400 mm
all drill holes without dimensions = Ø 8 mm
71
We reserve the right to technical alterations.Subject to correction. 075000053
air in from enclosure
467
air out from exchanger
270
144
41
140
Ø 230
Air/Water Heat Exchanger:
2450W, 2060 W, 1450 W and 760W for side-mounting
sealed with protective edging,
no extra work on the installation cutout necessary
water circuit tested for 30 bar pressure
temperature regulated by integrated thermostat and
solenoid valve (available as optional extra)
10 bar operating pressure
long air passage
IP 55
Cutout
compatibility
Refrigeration data
Cooling capacity at W20/A35 – nominal conditions*
Cooling capacity at W10/A35 – nominal conditions*
Air volume
Water volume
Water intake temperature
Air intake temperature
Noise level (1m distance)
Condensate discharge
Duty cycle
PWS 7602
2060 Watt
3550 Watt
900m3 /h
Max. distance
between air inlet
and -outlet
PWS 7402
2450 Watt
3400 Watt
800m3 /h
Min. unit depth
Suitable for both
50 Hz and 60 Hz
Level of protection
in respect of enclosure
(EN 60529)
PWS 7302
1450 Watt
2100 Watt
450m3 /h
PWS 7002
760 Watt
1250 Watt
180m3 /h
64dB (A)
54dB (A)
drip pan with safety overflow
100%
50dB (A)
400l/h
+20°C
+35°C
64dB (A)
Electrical data
PWS 7602
230V
50Hz/60Hz
198V...252V
200 Watt
0,84A
4A
PWS 7402
230V
50Hz/60Hz
198V...252V
220 Watt
1,25A
4A
PWS 7302
230V
50Hz/60Hz
198V...252V
85 Watt
0,4A
3A
PWS 7002
230V
50Hz/60Hz
198V...252V
55 Watt
0,25A
2A
Supplementary data
PWS 7602
PWS 7402
PWS 7302
PWS 7002
Weight (without packaging)
Connection to water supply
Orientation
Construction material
Colour
Electric shock protection
Climatic data
System of protection
Standard scope of supply
Accessories
Approvals
31 kg
Rated voltage**)
Rated frequency
Voltage range
Power consumption
Current consumption
Starting current
** other voltages available on request
72
31 kg
28 kg
13 kg
13 mm hose nipple, special connections available on request
vertical
sheet steel (stainless steel available on request)
RAL 7035, RAL 7032 (european grey), other colours available on request
according to EN 60529
max. ambient temperature + 70 °C / max. relative humidity 90 %
IP 55 (EN 60529) against the enclosure, when used as recommended
incl. sealing material, fixing material, operating instructions. Connection to water supply with inside taper
thermostat and solenoid valve
see overview cooling units / approvals
We reserve the right to technical alterations.Subject to correction. 075000053
* water intake temperature +20°C (W20) / +10°C (W10), air intake temperature +35°C, water volume= 400 l/h
ELECTRO-TECHNOLOGY FOR INDUSTRY
Installation cutout
Mechanical data:
560
PWS 7602
135
560
137
508
26
340
air in from
enclosure
860
Ø8
290
R20
77
170
condensate drain,
outside-Ø 12 mm
71.5
air out from
exchanger
540
supply line
PWS 7402/PWS 7302
return line
10
390
240
338
PWS 7302: 139
PWS 7402: 189
390
725
860
Ø 220
34
26
240
air in from
enclosure
supply line
return line
PWS 7002
390
1078
320
352
19
265
34
390
348
114
21
Ø8
air in from
enclosure
170
condensate drain,
outside-Ø 12 mm
R40
We reserve the right to technical alterations.Subject to correction. 075000053
59
320
air out from
exchanger
Ø8
59
913
1350
1350
400
R40
R20
42
380
587
587
170
165
383.5
air out from
exchanger
condensate drain
outside-Ø 12 mm
115
supply line
return line
Characteristic curves see page 74
47
43.5
103.5
R20
73
Characteristic curves - Effective refrigeration capacity
600 ltr. / h
400 ltr. / h
200 ltr. / h
600 ltr. / h
400 ltr. / h
200 ltr. / h
PWS7402
4500
4000
4000
4000
Ti = 45 °C
3000
2500
2000
Ti = 35 °C
1500
1000
Ti = 25 °C
0500
3500
Ti = 45 °C
3000
2500
2000
Ti = 35 °C
1500
1000
Ti = 25 °C
20
25
10
15
water intake temperature [°C]
600 ltr. / h
400 ltr. / h
200 ltr. / h
PWS7302
effective refrigeration capacity [Watt]
Ti = 45 °C
2000
1750
Ti = 35 °C
1500
1250
1000
Ti = 25 °C
750
20
1000
Ti = 25 °C
15
600 ltr. / h
400 ltr. / h
200 ltr. / h
2250
Ti = 45 °C
1250
Ti = 35 °C
1000
750
Ti = 25 °C
500
250
25
600 ltr. / h
400 ltr. / h
200 ltr. / h
PWD5302
1750
1500
20
water intake temperature [°C]
2500
250
20
1500
2000
Ti = 45 °C
2000
1750
1500
Ti = 35 °C
1250
1000
Ti = 25 °C
750
0500
10
15
Ti = 35 °C
2000
10
0
500
10
2500
25
PWS7002
2500
2250
3000
water intake temperature [°C]
effective refrigeration capacity [Watt]
15
Ti = 45 °C
3500
0500
0500
10
effective refrigeration capacity [Watt]
effective refrigeration capacity [Watt]
4500
3500
600 ltr. / h
400 ltr. / h
200 ltr. / h
PWD5402
4500
effective refrigeration capacity [Watt]
effective refrigeration capacity [Watt]
PWS7602
15
20
10
25
15
25
20
25
water intake temperature [°C]
water intake temperature [°C]
water intake temperature [°C]
Drop in pressure
0,5
0,4
0,4
0,4
0,2
0,1
0,0
0,3
0,2
0,1
200
400
600
0,2
0,1
0,0
0,0
0
0,3
0
200
400
water volume[l/h]
0
600
0,4
0,4
0,1
0
200
400
600
water volume[l/h]
0,3
0,2
0,1
600
0,3
0,2
0,1
0,0
0,0
0,0
loss of pressure[bar]
0,5
0,4
loss of pressure[bar]
PWD5302
0,5
loss of pressure[bar]
PWS7002
0,5
0,2
400
water volume[l/h]
PWS7302
0,3
200
water volume[l/h]
0
200
400
600
water volume[l/h]
0
200
400
600
water volume[l/h]
this curve demonstrates the relationship between the drop in pressure and the water volume
the details of pressure loss are important for designing the piping and the circulation pump
a low drop in pressure also indicates a lower operating pressure for the heat exchangers. This allows you to keep the cost of investment for the pump down to a minimum
74
We reserve the right to technical alterations.Subject to correction. 075000053
0,3
loss of pressure[bar]
PWD5402
0,5
loss of pressure[bar]
PWS 7402
0,5
loss of pressure[bar]
PWS7602
ELECTRO-TECHNOLOGY FOR INDUSTRY
Air/Water Heat Exchangers: Special Versions
The air/water heat exchangers listed on this page were developed
especially for applications in the car industry. Pfannenberg adapted the
products to comply with the special requirements dictated by the harsh
conditions sometimes encountered there.
PWD 5412 and PWD 5312
These top-mounted units were designed to cope with special conditions
arising from the addition of substances to the cooling water.
All components that get in contact with the cooling water, such as heat
exchanger and pipes are made of stainless steel (V4A). This allows these two
models to be used in conjunction with strongly polluted or extremely salty
water. This situation may arise if river water is mixed with the cooling water.
Saltwater has the chemical property of extracting the copper from normal
pipes, causing leaks in the water system sometimes after only a few months
of operation.
These units are fitted with an integrated thermostat connected directly
to the exterior by means of a plug. This allows you to set up an electrically
controlled valve.
We suggest to use ball valves to minimize the contamination hazard.
The installation cutout is almost identical with the cutout for standard models
the PWD 5402 and PWD 5302. However, the installation height of model
PWD 5412 is 86 mm higher than the standard units, and model PWD 5312
is 64 mm higher.
PWS 7612, PWS 7412, PWS 7312 and PWS 7012
With integrated thermostat, set at + 35 °C
(adjustable from + 25 °C to + 45 °C).
With integrated solenoid valve.
This helps to maintain the temperature inside the enclosure at the preset
level. The cooling water only flows through the heat exchanger if the
temperature inside the enclosure rises above the preset value.
The unit is connected to the mains using a rubber connector.
The relevant socket is located at the bottom adjacent to the water
connection point.
The plug and 3 m power cord are included in the scope of supply.
The units are fitted in place using 6 mm threaded bolts in 8 mm Ø
predrilled holes located on the rear panel.
Simply detach the front panel to mount the units from the outside.
We reserve the right to technical alterations.Subject to correction. 075000053
These air/water heat exchangers were developed for standard applications
in the car industry.
75
The extra servicefriendly Filterfan
... IP 55 with outstanding
IP 54
IP 55
UV
Type
12

®
RAL
7035
7032
EMC
Bound to lead by inventing modern innovative products!
This is Pfannenberg’s mission!
Filterfan
M
No tools required for assembly!
4-corner fastening system
”click and fit!”
M
The assembly does not require
tools – mounting of the filterfans
is completed without the need
for screws!
4
This extremely safe mounting
system is patented!
of the screw less mounting
system – simply listen to the
"click"!
Quick change of the filter mat –
the front cover can be opened
and this enables the easiest
access during the change of
the filter mat!
M
AC DC
Bound to lead by our patented innovations for higher
performance and availability. Quality "Made in Germany"
at an excellent price-performance ratio.
If you want to learn more navigate to:
www.filterfan.com
Option: Intelligent filterfan
76
We reserve the right to technical alterations.Subject to correction. 075000053
M
Safe assembly and disassembly
ELECTRO-TECHNOLOGY FOR INDUSTRY
An easier connection to power
by clamps –
M
airflow capacity
it cannot be easier!
Everything from one hand!
M
M
Select the components for your climatisation project
yourself
Change to new 4th Generation
filterfan easily as all the cutouts
are compatible with the
previous generation!
How? Very easily by using the software PSS
(Pfannenberg-Software-Service), which
you can order free of charge
or download yourself from
www.pfannenberg.com.
M
90°
We manufacture a very comprehensive range of standard cooling
products and related accessories to enable precise control of the
internal environment of your enclosure. Contact us today to discuss
the requirements of your specific project or visit us at
www.pfannenberg.com
A variable connection position
by 90° step turns
We reserve the right to technical alterations.Subject to correction. 075000053
Fitting is compatible
An easier change of
airflow direction!
90°
Filterfan array
(In-Line mounting)
M
The fan can be rotated in steps
of 90°. Optimised adaptation for
electrical connection!
According to the specification
of the customer!
77
All filterfans of the 4th Generation at a glance…
IP 54
IP 55
Model
PF 11.000
PF 22.000
PF 32.000
PF 42.500
System of
protection
90°
Simple click and
fit! Without tools
Filterfans - Model PF
90°
Fan rotating by 90°
Change of air
flow direction
Installation
without tools
Rated voltage
Power
230V / 115V AC
12W / 12W
free-flow
230V / 115V AC
19W / 20W
12V / 24V / 48V DC
5W / 5W / 5W
230V / 115V AC
19W / 20W
12V / 24V / 48V DC
5W / 5W / 5W
230V / 115V AC
18W / 18W
45W / 40W
400V 2 ~
41W
IP 54: 44 m3/h / 13 W/K
IP 55: 40 m3/h / 15 W/K
(PF 22.000 + PFA 20.000)
IP 54: 82 m3/h / 27 W/K
IP 55: 55 m3/h / 18 W/K
(PF 32.000 + PFA 30.000)
IP 54: 116 m3/h / 39 W/K
IP 55: 109 m3/h / 37 W/K
(PF 42.500 + PFA 40.000)
IP 54: 110 m3/h / 37 W/K
IP 55: 100 m3/h / 33 W/K
IP 54: 156 m3/h / 52 W/K
IP 55: 145 m3/h / 48 W/K
IP 54: 256 m3/h / 85 W/K
IP 55: 233 m3/h / 78 W/K
IP 54: 231 m3/h / 77 W/K
IP 55: 180 m3/h / 60 W/K
(PF 43.000 + PFA 40.000)
PF 66.000
PF 67.000
230V / 115V AC
65W / 75W
IP 54: 480 m3/h / 160 W/K
IP 55: 505 m3/h / 168 W/K
IP 54: 370 m3/h / 123 W/K
IP 55: 380 m3/h / 127 W/K
(PF 65.000 + PFA 60.000)
IP 54: 445 m3/h / 148 W/K
IP 55: 490 m3/h / 163 W/K
(PF 66.000 + PFA 60.000)
IP 54: 560 m3/h / 187 W/K
IP 55: 570 m3/h / 190 W/K
(PF 67.000 + PFA 60.000)
400V / 460 V 3 ~
120 W
230V / 115V AC
115W / 110W
400V / 460 V 3 ~
on request
230V / 115V AC
135W / 140 W
IP 54: 640 m3/h / 213 W/K
IP 55: 770 m3/h / 257 W/K
IP 54: 845 m3/h / 282 W/K
IP 55: 925 m3/h / 308 W/K
UL
version
page
92 x 92 mm
93 x 93 mm
yes
82
125 x 125 mm
126 x 126 mm
yes
84
177 x 177 mm
178 x 178 mm
yes
86
223 x 223 mm
224 x 224 mm
yes
88
223 x 223 mm
224 x 224 mm
yes
88
291 x 291 mm
292 x 292 mm
yes
90
291 x 291 mm
292 x 292 mm
yes
90
291 x 291 mm
292 x 292 mm
yes
90
(PF 11.000 + PFA 10.000)
12V / 24V / 48V DC 12W / 12W / 12W
PF 65.000
Installation cutout at wall thickness
≤ 2mm
>2mm ≤ 3mm
16 m3/h / 5 W/K
IP 54: 61 m3/h / 20 W/K
IP 55: 56 m3/h / 19 W/K
12V / 24V / 48V DC 5W / 4,7W / 4,6W
230V / 115V AC
Airflow / Capacity
in combination PF + PFA
25 m3/h / 8 W/K
12V / 24V / 48V DC 2 ,4 W / 2,4 W / 2,6 W
PF 43.000
4-corner fastening system „click and fit“ –
patented quick-action snap-fit system for rapid, extremly safe installation of filterfans
Exhaust Filters - Model PFA
UL
version
page
PFA 10.000
92 x 92 mm
93 x 93 mm
yes
82
PFA 20.000
PFA 30.000
125 x 125 mm
177 x 177 mm
126 x 126 mm
178 x 178 mm
yes
yes
84
86
IP 54
IP 55
Installation
without tools
Fan rotating by 90°
Rated voltage
Power
230V / 115V AC
12W / 12W
System of
protection
Model
PF 11.000 EMC*
PF 22.000 EMC
PF 32.000 EMC
PF 42.500 EMC
PF 43.000 EMC
90°
Simple click and
fit! Without tools
90°
EMC
12V / 24V / 48V DC 2 ,4 W / 2,4 W / 2,6 W
230V / 115V AC
19W / 20W
12V / 24V / 48V DC
5W / 5W / 5W
230V / 115V AC
19W / 20W
12V / 24V / 48V DC
5W / 5W / 5W
230V / 115V AC
18W / 18W
12V / 24V / 48V DC 5W / 4,7W / 4,6W
230V / 115V AC
45W / 40W
400V 2 ~
41W
PF 66.000 EMC
PF 67.000 EMC
400V / 460 V 3 ~
120 W
230V / 115V AC
115W / 110W
400V / 460 V 3 ~
on request
230V / 115V AC
* PF 11.000 EMC IP 54
78
65W / 75W
135W / 140 W
PFA 40.000
PFA 60.000
223 x 223 mm
291 x 291 mm
224 x 224 mm
292 x 292 mm
UL
version
page
yes
yes
88
90
EMC Filterfans - Model PF
4-corner fastening system „click and fit“ –
patented quick-action snap-fit system for rapid, extremly safe installation of filterfans
free-flow
Airflow / Capacity
in combination PF + PFA
25 m3/h / 8 W/K
IP 54: 61 m3/h / 20 W/K
IP 55: 56 m3/h / 19 W/K
IP 54: 110 m3/h / 37 W/K
IP 55: 100 m3/h / 33 W/K
IP 54: 156 m3/h / 52 W/K
IP 55: 145 m3/h / 48 W/K
16 m3/h / 5 W/K
(PF 11.000 + PFA 10.000)
IP 54: 44 m3/h / 13 W/K
IP 55: 40 m3/h / 15 W/K
(PF 22.000 + PFA 20.000)
IP 54: 82 m3/h / 27 W/K
IP 55: 55 m3/h / 18 W/K
(PF 32.000 + PFA 30.000)
IP 54: 116 m3/h / 39 W/K
IP 55: 109 m3/h / 37 W/K
(PF 42.500 + PFA 40.000)
IP 54: 256 m3/h / 85 W/K
IP 55: 233 m3/h / 78 W/K
IP 54: 231 m3/h / 77 W/K
IP 55: 180 m3/h / 60 W/K
(PF 43.000 + PFA 40.000)
IP 54: 480 m3/h / 160 W/K
IP 55: 505 m3/h / 168 W/K
IP 54: 370 m3/h / 123 W/K
IP 55: 380 m3/h / 127 W/K
(PF 65.000 + PFA 60.000)
IP 54: 445 m3/h / 148 W/K
IP 55: 490 m3/h / 163 W/K
(PF 66.000 + PFA 60.000)
IP 54: 560 m3/h / 187 W/K
IP 55: 570 m3/h / 190 W/K
(PF 67.000 + PFA 60.000)
12V / 24V / 48V DC 12W / 12W / 12W
PF 65.000 EMC 230V / 115V AC
Installation cutout at wall thickness
≤2mm
>2mm ≤3mm
Model
IP 54: 640 m3/h / 213 W/K
IP 55: 770 m3/h / 257 W/K
IP 54: 845 m3/h / 282 W/K
IP 55: 925 m3/h / 308 W/K
Installation cutout
UL
version
page
93 x 93 mm ± 0,5 mm
yes
93
126,5 x 126,5 mm ± 0,5 mm
yes
93
178 x 178 mm ± 0,5 mm
yes
93
224 x 234 mm ± 0,5 mm
yes
93
224 x 224 mm ± 0,5 mm
yes
93
292 x 292 mm ± 0,5 mm
yes
93
292 x 292 mm ± 0,5 mm
yes
93
292 x 292 mm ± 0,5 mm
yes
93
We reserve the right to technical alterations.Subject to correction. 075000053
Installation cutout at wall thickness
≤2mm
>2mm ≤3mm
Model
NEW!
Filterans
4th Generation
Size
ELECTRO-TECHNOLOGY FOR INDUSTRY
Cutout
(mm)
Filterfans
3rd Generation
PF 67.000
PF 66.000
PF 65.000
6
6
6
291 x 291
291 x 291
291 x 291
PF 7.000
PF 6.000
PF 5.000
PF 43.000
PF 42.500
4
4
223 x 223
223 x 223
PF 3.000
PF 2.500
PF 32.000
3
177 x 177
PF 22.000
2
125 x 125
PF 2.000
PF 11.000
1
92 x 92
PF 1.000
Exhaust filter
4th Generation
Size
Cutout
(mm)
Exhaust filter
3rd Generation
291 x 291
291 x 291
291 x 291
PFA 7.000
PFA 6.000
PFA 5.000
PFA 2.500 /
PFA 3.000
PFA 60.000
6
PFA 40.000
4
223 x 223
223 x 223
PFA 30.000
3
177 x 177
PFA 20.000
2
125 x 125
PFA 2.000
PFA 10.000
1
92 x 92
PFA 1.000
We reserve the right to technical alterations.Subject to correction. 075000053
Pfannenberg Filterfans of the 4th Generation Installation size comparison
79
Performance selection diagram
for filterfans IP 54
according to temperature difference
10000
PF 67.000
PF 66.000
PF 67.000 + PFA 60.000
PF 65.000
PF 66.000 + PFA 60.000
PF 65.000 + PFA 60.000
PF 43.000
PF 43.000 + PFA 40.000
PF 42.500
PF 42.500 + PFA 40.000
PF 32.000
1000
PF 32.000 + PFA 30.000
PF 22.000
PF 22.000 + PFA 20.000
PF 11.000
PF 11.000 + PFA 10.000
10
0
5
10
15
Temperature difference ΔT [K]
80
20
25
30
35
40
We reserve the right to technical alterations.Subject to correction. 075000053
Dissapation loss Pv [W]
100
Performance selection diagram
for filterfans IP 55
according to temperature difference
ELECTRO-TECHNOLOGY FOR INDUSTRY
10000
PF 67.000
PF 66.000
PF 67.000 + PFA 60.000
PF 65.000
PF 66.000 + PFA 60.000
PF 65.000 + PFA 60.000
PF 43.000
PF 43.000 + PFA 40.000
PF 42.500
PF 42.500 + PFA 40.000
PF 32.000
1000
PF 22.000
PF 32.000 + PFA 30.000
PF 22.000 + PFA 20.000
Dissapation loss Pv [W]
We reserve the right to technical alterations.Subject to correction. 075000053
100
10
0
5
10
15
Temperature difference ΔT [K]
20
25
30
35
40
81
Filterfan PF11.000
Exhaust Filter PFA10.000
PF11.000
NEW!
Versatile incorporation into equipment. Examples are in the medical
industry, in EDV/IT equipment, warning and control enclosures and
also for low power applications.
System of
protection
AC
90°
®
System of
protection
RAL
UL approval
Fan rotating by 90°
Installation
without tools
Simple click and fit!
Without tools
4
7035
7032
Colour
Safe installation
Time-saving
Suitable for both
50 Hz + 60 Hz
Change of air
flow direction
Cutout compatible
to old range
Airflow data

DC
90°
Type
12
IP 54
4 corner
fastening system
PF 11.000
PFA 10.000
IP 54-filter mat
25 m3/h; 50 Hz / 29 m3/h; 60 Hz
Air delivery free-flow
Capacity free-flow
-
8 W/K / 10 W/K
-
Airflow in combination
(filterfan + exhaust filter)
16 m3/h; 50 Hz / 18 m3/h; 60 Hz
(PF 11.000 + PFA 10.000)
-
Capacity in combination
(filterfan + exhaust filter)
5 W/K / 6 W/K
(PF 11.000 + PFA 10.000)
-
Max. static pressure
(Airflow = 0 m3/h)
38 Pa
-
Filtration efficiency
88%
88%
Filter material grade
G 3 (DIN EN 779)
G 3 (DIN EN 779)
100%
-
Duty cycle
Technical data
PF 11.000
PFA 10.000
AC
DC
Outside dimensions in mm
(Height x Width x Installation depth)
109 x 109 x 62
109 x 109 x 49
Bearing type
sleeve bearings
ball bearings
-
vertical
any
any
Fitting position
Construction
housing and guard of sprayed thermoplastic,
self-extinguishing, UL 94 VO
Weight
0,55 kg
Safety protection
0,16 kg
-
RAL 7035, RAL 7032 or black, other colours available on request
Type of connection
2 wires, 310 mm long
Electrical data
-
PF 11.000
AC 50 Hz / 60 Hz
Power consumption
82
0,06 kg
according to EN 60529
Colour
Rated voltage +/- 10%
109 x 109 x 19
230 V
115 V
12 V
DC
24 V
48 V
12 W / 11 W
12 W / 11 W
2,4 W
2,4 W
2,6 W
We reserve the right to technical alterations.Subject to correction. 075000053
Filter mat (standard grade)
ELECTRO-TECHNOLOGY FOR INDUSTRY
Installation cutout:
Airflow data:
PF 11.000
PF 11.000 + PFA 10.000
[Pa]
Static pressure increase
Installation cutout
92 mm x 92 mm*
standard punch size
Airflow
Mechanical data:
PF 11.000
PF 11.000 + PFA 10.000
PFA 10.000
AC = 66
DC>@
= 53
'&
23
AC>@
= 62
$&
DC>@
= 49
'&
19
6HDOLQJ
'LFKWXQJ
sealing
sealing
design frame
%DVLFHQFORVXUH
basic
enclosure
*UXQGJHKlXVH
design frame
80
105
109
basic enclosure
fan
filter mat
filter
mat
)LOWHUPDW
)LOWHUPDWWH
mounting
wall
WLQJZDOO
0RXQWLQJZDOO
0mounting
W
G wall
Supplementary data
PF 11.000 AC
PF 11.000 DC
We reserve the right to technical alterations.Subject to correction. 075000053
protection
against
WLRQDJDLQVWFRQWDFW
contact
XQJVVFKXW]
PFA 10.000
Climatic data
Operating temperature
– 15 °C (+ 5 °F) to + 55 °C (+ 131 °F)
Storage temperature
- 20 °C (- 4 °F) to + 70 °C (+ 158 °F)
Max. relative humidity
90%
System of protection
IP 54 (EN 60 529), when used as recommended, not for outdoor-application
Basic parts kit
Accessories
filter mat, user manual
radiant heater, fan heater, thermostat, hygrostat
Approvals
* Tolerance installation cutout
UL approval
92
+1
– 0 thickness of material to 2mm
93 +– 01 thickness of material > 2mm ≤ 3mm
83
Filterfan PF22.000
Exhaust Filter PFA20.000
PF 22.000
NEW!
For a broad range of applications in electronics as well as conventional
switchgear installations; a wide range of operating voltages ensures
universal use.
Now available as IP 55 version with significantly higher airflow capacity
and extended service life.
Type
12
System of
protection
AC

DC
System of
protection
RAL
90°
®
90°
IP 54
IP 55
UL approval
Fan rotating by 90°
Safe installation
Installation
without tools
UV
7035
7032
Colour
UV resistant
(IP55)
Time-saving
In-line mounting
4
Airflow data
Change of air
flow direction
Cutout compatible
to old range
PF 22.000
IP 54: IP 54-filter mat - IP 55: fluted filter
Filter mat
Airflow free-flow
Suitable for both
50 Hz + 60 Hz
PFA 20.000
IP 54: 61 m3/h; 50 Hz / 70 m3/h; 60 Hz - IP 55: 56 m3/h; 50 Hz / 64 m3/h; 60 Hz
Capacity free-flow
4 corner
fastening system
-
IP 54: 20 W/K / 23 W/K - IP 55: 19 W/K / 21 W/K
-
Airflow in combination
(filterfan + exhaust filter)
IP 54: 44 m3/h; 50 Hz / 52 m3/h; 60 Hz - IP 55: 40 m3/h; 50 Hz / 46 m3/h; 60 Hz
(PF 22.000 + PFA 20.000)
-
Capacity in combination
(filterfan + exhaust filter)
IP 54: 15 W/K / 17 W/K - IP 55: 13 W/K / 15 W/K
(PF 22.000 + PFA 20.000)
-
IP 54: 60 Pa - IP 55: 57 Pa
-
Max. static pressure
(Airflow = 0 m3/h)
Filtration efficiency
IP 54: 88% - IP 55: 91%
Filter material grade
IP 54: G 3 - IP 55: G 4 (DIN EN 779)
Duty cycle
100%
Technical data
-
PF 22.000
PFA 20.000
AC
DC
Outside dimensions in mm
(Height x Width x Installation depth)
145 x 145 x 70
145 x 145 x 64
Bearing type
sleeve bearings
ball bearings
-
vertical
any
any
Fitting position
Construction
housing and guard of sprayed thermoplastic,
self-extinguishing UL94 VO, IP55: UV resistant
Weight
0,7 kg
0,44 kg
Safety protection
-
RAL 7035, RAL 7032 or black, other colours available on request
terminal strip
2 wires, 310 mm long
Electrical data
Power consumption
84
-
PF 22.000
AC 50 Hz / 60 Hz
Rated voltage +/- 10%
0,12kg
according to EN 60529
Colour
Type of connection
145 x 145 x 26
230 V
115 V
12 V
DC
24 V
48 V
19 W / 18 W
20 W / 20 W
5W
5W
5W
We reserve the right to technical alterations.Subject to correction. 075000053
Simple click and fit!
Without tools
ELECTRO-TECHNOLOGY FOR INDUSTRY
Installation cutout
Airflow data:
[Pa]
[Pa]
Static pressure increase
PF 22.000 IP 55
Static pressure increase
PF 22.000 IP 54
PF 22.000 + PFA 20.000
Installation cutout
125 mm x 125 mm *
Airflow
Airflow
Mechanical data:
PF 22.000
PF 22.000 + PFA 20.000
PFA 20.000
AC >@
= 75
$&
DC >@
= 69
'&
31
AC>@
= 70
$&
'&
DC>@
= 64
%DVLFHQFORVXUH
6HDOLQJ
sealing
'LFKWXQJ
design frame
'HVL
'HVL
design
frame
DVLFHQFORVXUH
basicUXQGJHKlXVH
enclosure
119
140
basic*UXQGJHKlXVH
enclosure
)DQ
/IWHU
fan
26
145
6HDOLQJ
sealing
'LFKWXQJ
filter mat
)LOWHUPDW
)LOWHUPDWWH
QDJDLQVWFRQWDFW
protection QJVVFKXW]
against
filter mat
contact
)LOWHU PDW
0 WL
OO
mounting
wall
0RQWDJHZDQG
PF 22.000 AC
PF 22.000 DC
We reserve the right to technical alterations.Subject to correction. 075000053
Supplementary data
0RXQWLQJZDOO
mounting
wall
PFA 20.000
Climatic data
Operating temperature
–15°C (- 5 °F) to + 55°C (+ 131 °F)
Storage temperature
– 20 °C (- 4 °F) to + 70 °C (+ 158 °F)
Max. relative humidity
System of protection
Basic parts kit
Accessories
Approvals
* Tolerance installation cutout
90%
IP 54 or IP 55 (EN 60 529), when used as recommended
filter mat, user manual
radiant heater, fan heater, thermostat, hygrostat
UL approval
125 +– 01 thickness of material to 2mm
126 –+ 01 thickness of material > 2mm ≤ 3mm
85
Filterfan PF32.000
Exhaust Filter PFA30.000
PF 32.000
NEW!
For a broad range of applications in electronics as well as conventional
switchgear installations; a wide range of operating voltages ensures
universal use.
Now available as IP 55 version with significantly higher airflow capacity
and extended service life.
Type
12
System of
protection
AC

DC
System of
protection
RAL
90°
®
90°
IP 54
IP 55
UL approval
Fan rotating by 90°
Safe installation
Installation
without tools
UV
7035
7032
Colour
UV resistant (IP55)
Time-saving
In-line mounting
4
Airflow data
Change of air
flow direction
Cutout compatible
to old range
PF 32.000
IP 54: IP 54-filter mat - IP 55: fluted filter
Filter mat
Airflow free-flow
Suitable for both
50 Hz + 60 Hz
PFA 30.000
IP 54: 110 m3/h; 50 Hz / 125 m3/h; 60 Hz - IP 55: 100 m3/h; 50 Hz / 110 m3/h; 60 Hz
Capacity free-flow
4 corner
fastening system
-
IP 54: 37 W/K / 42 W/K - IP 55: 33 W/K / 37 W/K
-
Airflow in combination
(filterfan + exhaust filter)
IP 54: 82 m3/h; 50 Hz / 93 m3/h; 60 Hz - IP 55: 55 m3/h; 50 Hz / 64 m3/h; 60 Hz
(PF 32.000 + PFA 30.000)
-
Capacity in combination
(filterfan + exhaust filter)
IP 54: 27 W/K / 31 W/K - IP 55: 18 W/K / 21 W/K
(PF 32.000 + PFA 30.000)
-
Max. static pressure
(Airflow = 0 m3/h)
IP 54: 66 Pa - IP 55: 61 Pa
-
Filtration efficiency
IP 54: 88% - IP 55: 91%
Filter material grade
IP 54: G 3 - IP 55: G 4 (DIN EN 779)
Duty cycle
100%
Technical data
-
PF 32.000
PFA 30.000
AC
DC
Outside dimensions in mm
(Height x Width x Installation depth)
202 x 202 x 87
202 x 202 x 81
Bearing type
sleeve bearings
ball bearings
-
vertical
any
any
Fitting position
Construction
housing and guard of sprayed thermoplastic,
self-extinguishing UL94 VO, IP55: UV resistant
Weight
0,87 kg
0,61 kg
Safety protection
-
RAL 7035, RAL 7032 or black, other colours available on request
terminal strip
cage clamp
Electrical data
Power consumption
86
-
PF 32.000
AC 50 Hz / 60 Hz
Rated voltage +/- 10%
0,26 kg
according to EN 60529
Colour
Type of connection
202 x 202 x 34
230 V
115 V
12 V
DC
24 V
48 V
19 W / 18 W
20 W / 20 W
5W
5W
5W
We reserve the right to technical alterations.Subject to correction. 075000053
Simple click and fit!
Without tools
ELECTRO-TECHNOLOGY FOR INDUSTRY
Installation cutout:
Airflow data:
[Pa]
Static pressure increase
PF 32.000 IP 55
[Pa]
Static pressure increase
PF 32.000 IP 54
PF 32.000 + PFA 30.000
Installation cutout
177 mm x 177 mm *
Airflow
Airflow
Mechanical data:
PF 32.000
PF 32.000 + PFA 30.000
PFA 30.000
$&
AC>@
= 93
'&DC>@
= 87
40
$&AC>@
= 87
= 81
'&DC>@
34
6HDOLQJ
sealing
'LFKWXQJ
%DVLFHQFORVXUH
sealing
design frame
design frame
*UXQGJHKlXVH
basic
enclosure
basic enclosure
Q
119
197
202
fan
WHU
filter mat
protection
against
QDJDLQVWFRQWDFW
contact
JVVFKXW]
ZDOO
)LOWHUPDW
filter mat
)LOWHUPDWWH
We reserve the right to technical alterations.Subject to correction. 075000053
mounting wall
DQG
mounting wall
Supplementary data
PF 32.000 AC
PF 32.000 DC
PFA 30.000
Climatic data
Operating temperature
–15°C (- 5 °F) to +55°C (+ 131 °F)
Storage temperature
– 20 °C (- 4 °F) to + 70 °C (+ 158 °F)
Max. relative humidity
System of protection
Basic parts kit
Accessories
Approvals
* Tolerance installation cutout
90%
IP 54 or IP 55 (EN 60 529), when used as recommended
filter mat, user manual
radiant heater, fan heater, thermostat, hygrostat
UL approval
177 –+ 01 thickness of material to 2mm
178 +– 01 thickness of material > 2mm ≤ 3mm
87
Filterfan PF42.500, PF43.000
Exhaust Filter PFA 40.000
PF 42.500 / PF 43.000
NEW!
For optimum flexibility to suit medium range applications in plant and
machine equipment. Two levels of capacity in one single installation
cutout.
Now available as IP 55 version with significantly higher airflow capacity
and extended service life.
Type
12
System of
protection
RAL
UL approval
Colour
UV resistant
(IP55)
Simple click and fit! Suitable for both
50 Hz + 60 Hz
Without tools
Filter mat
Airflow free-flow
Capacity free-flow
Airflow in combination
(filterfan + exhaust filter)
Capacity in combination
(filterfan + exhaust filter)
Max. static pressure
(Airflow = 0 m3/h)
Filtration efficiency
Filter material grade
Duty cycle
In-line mounting
IP 54: 52 Pa - IP 55: 49 Pa
Change of air
flow direction
Cutout compatible Spring clip
to old range
principle
IP 54: 116 Pa - IP 55: 112 Pa
PF 42.500
Bearing type
Fitting position
Installation
without tools
PFA 40.000
-
PFA 40.000
AC
DC
252 x 252 x 113
252 x 252 x 97
252 x 252 x 38
ball bearings
-
any, horizontal airflow preferred
any
Construction
housing and guard of sprayed thermoplastic,
self-extinguishing UL 94 VO, IP 55: UV resistant
1,18 kg
0,92 kg
Safety protection
1,67 kg
1,51 kg
0,46 kg
according to EN 60529
Colour
-
RAL 7035, RAL 7032 or black, other colours available on request
Type of connection
cage clamp
Electrical data
-
PF 42.500
AC 50 Hz / 60 Hz
Power consumption
4 corner
fastening system
-
PF 43.000
DC
252 x 252 x 97
Fan rotating by 90° Cutout
compatibility
-
IP 54: 88% - IP 55: 91%
IP 54: G 3 - IP 55: G 4 (DIN EN 779)
100%
Outside dimensions in mm
(Height x Width x Installation depth)
Rated voltage +/- 10%
Safe installation
PF 43.000
IP 54: IP 54-filter mat - IP 55: fluted filter
IP 54: 156 m3/h; 50 Hz / 171 m3/h; 60 Hz
IP 54: 256 m3/h; 50 Hz / 292 m3/h; 60 Hz
IP 55: 233 m3/h; 50 Hz / 265 m3/h; 60 Hz
IP 55: 145 m3/h; 50 Hz / 160 m3/h; 60 Hz
IP 54: 52 W/K / 57 W/K - IP 55: 48 W/K / 53 W/K IP 54: 85 W/K / 97 W/K - IP 55: 78 W/K / 88 W/K
IP 54: 116 m3/h; 50 Hz / 127 m3/h; 60 Hz
IP 54: 231 m3/h; 50 Hz / 265 m3/h; 60 Hz
IP 55: 180 m3/h; 50 Hz / 207 m3/h; 60 Hz
IP 55: 109 m3/h; 50 Hz / 113 m3/h; 60 Hz
(PF 42.500 + PFA 40.000)
(PF 43.000 + PFA 40.000)
IP 54: 39 W/K / 36 W/K - IP 55: 37 W/K / 38 W/K IP 54: 77 W/K / 88 W/K - IP 55: 60 W/K / 69 W/K
(PF 43.000 + PFA 40.000)
(PF 43.000 + PFA 40.000)
AC
Weight
Time-saving
PF 42.500
Technical data
90°
4
UV
7035
7032
Airflow data
®
230 V
115 V
12 V
DC
24 V
48 V
18 W / 17 W
18 W / 17 W
5W
4,7 W
4,6 W
PF 43.000
AC 50 Hz / 60 Hz
Rated voltage +/- 10%
Power consumption
88
DC
400 V 2~
230 V
115 V
12 V
24 V
48 V
41 W / 38 W
45 W / 39 W
40 W / 40 W
12 W
12 W
12 W
We reserve the right to technical alterations.Subject to correction. 075000053
System of
protection

AC DC
90°
IP 54
IP 55
ELECTRO-TECHNOLOGY FOR INDUSTRY
Installation cutout:
PF 42.500, PF 43.000 + PFA 40.000
Airflow data:
PF 42.500 / PF 43.000 IP 54
PF 42.500 / PF 43.000 IP 55
[Pa]
Installation cutout
223 mm x 223 mm *
Static pressure increase
Static pressure increase
[Pa]
Airflow
Airflow
Mechanical data:
PF 42.500 + PF 43.000
PF 42.500. PF 43.000 + PFA 40.000
PFA 40.000
PF 42.500 = 103
PF 43.000 AC = 119
PF 3)'&
43.000 DC
= 103
PF3)
42.500 = 97
PF 3)$&
43.000 AC
= 113
PF3)'&
43.000 DC= 97
44
38
6HDOLQJ
'LFKWXQJ
sealing
sealing
design
frame
filter mat
protection
against fan
HFWLRQDJDLQVWFRQWDFW
KUXQJVVFKXW]
contact
JZDOO
0RXQWLQJZDOO
mountingZDQG
wall
mounting
0RQWDJHZDQGwall
Supplementary data
We reserve the right to technical alterations.Subject to correction. 075000053
PF3)
42.500 = 127
PF3)
43.000 =‘
Ø 172
filter mat
)DQ
/IWHU
design frame
basic
enclosure
246
fan)DQIUDPH
frame
/IWHUWUlJHU
6HDOLQJ
'LFKWXQJ
252
basic enclosure
%DVLFHQFORVXUH
*UXQGJHKlXVH
PF 42.500 / PF 43.000 AC
PF 42.500 / PF 43.000 DC
PFA 40.000
Climatic data
Operating temperature
– 15°C (- 5 °F) to + 55°C (+ 131 °F)
Storage temperature
– 20 °C (- 4 °F) to + 70 °C (+ 158 °F)
Max. relative humidity
System of protection
Basic parts kit
Accessories
Approvals
* Tolerance installation cutout
90%
IP 54 or IP 55 (EN 60 529), when used as recommended
filter mat, user manual
radiant heater, fan heater, thermostat, hygrostat
UL approval
223 +– 01 thickness of material to 2mm
224 +– 10 thickness of material > 2mm ≤ 3mm
89
Cutout
compatible with
cooling unit DTFI 9021
see page 24
Filterfan PF65.000, PF66.000, PF67.000
Exhaust Filter PFA 60.000
NEW!
PF 65.000 / PF66.000 / PF67.000
For optimum flexibility to suit large switchgear installations where
extreme heat extraction is needed whilst maintaining the required IP
rating. Three levels of capacity in one single installation cutout.
Now available as IP 55 version with significantly higher airflow capacity
and extended service life.
System of
protection
Type
12

AC
System of
protection
RAL
UL approval
Fan rotating by 90°
Cutout
compatibility
In-line mounting
Safe installation
Installation
without tools
UV
7035
7032
Colour
90°
®
90°
IP 54
IP 55
UV resistant
(IP55)
Time-saving
4
Airflow data
Filter mat
Airflow free-flow
Capacity free-flow
Airflow in combination
(filterfan + exhaust filter)
Capacity in combination
(filterfan + exhaust filter)
Max. static pressure
(Airflow = 0 m3/h)
Filtration efficiency
Filter material grade
Duty cycle
PF 65.000
IP54: 480m3/h; 50Hz / 480m3/h; 60Hz
IP55: 505m3/h; 50Hz / 505m3/h; 60Hz
IP 54: 160 W/K / 160 W/K
IP 55: 168 W/K / 168 W/K
IP54: 370m3/h; 50Hz / 370m3/h; 60Hz
IP55: 380m3/h; 50Hz / 380m3/h; 60Hz
(PF 65.000 + PFA 60.000)
IP 54: 123 W/K / 123 W/K
IP 55: 127 W/K / 127 W/K
(PF 65.000 + PFA 60.000)
IP 54: 76 Pa - IP 55: 74 Pa
Outside dimensions in mm
(Height x Width x Installation depth)
4 corner
fastening system
IP 54: 134 Pa - IP 55: 134 Pa
IP 54: 192 Pa - IP 55: 187 Pa
Spring clip
principle
PFA 60.000
91 %
G 4 (DIN EN 779)
-
PF 65.000
PF 66.000
PF 67.000
PFA 60.000
320 x 320 x 150
320 x 320 x 150
320 x 320 x 150
320 x 320 x 39
Fitting position
Construction
ball bearings
-
any, horizontal airflow preferred
any
housing and guard of sprayed thermoplastic,
self-extinguishing, UL 94 VO, IP 55: UV resistant
Weight
3,2 kg
3,2 kg
Safety protection
3,7 kg
0,7 kg
according to EN 60529
Colour
-
RAL 7035, RAL 7032, other colours available on request
Type of connection
cage clamp
Electrical data
PF 65.000
90
Cutout compatible
to old range
PF 66.000
PF 67.000
IP 54: IP 54-filter mat - IP 55: fluted filter
IP54: 640m3/h; 50Hz / 653m3/h; 60Hz IP54: 845m3/h; 50Hz / 875m3/h; 60Hz
IP55: 770m3/h; 50Hz / 785m3/h; 60Hz IP55: 925m3/h; 50Hz / 950m3/h; 60Hz
IP 54: 213 W/K / 218 W/K
IP 54: 282 W/K / 292 W/K
IP 55: 257 W/K / 262 W/K
IP 55: 308 W/K / 317 W/K
IP54: 445m3/h; 50Hz / 445m3/h; 60Hz IP54: 560m3/h; 50Hz / 625m3/h; 60Hz
IP55: 490m3/h; 50Hz / 501m3/h; 60Hz IP55: 570m3/h; 50Hz / 625m3/h; 60Hz
(PF 66.000 + PFA 60.000)
(PF 67.000 + PFA 60.000)
IP 54: 148 W/K / 148 W/K
IP 54: 187 W/K / 208 W/K
IP 55: 163 W/K / 167 W/K
IP 55: 190 W/K / 208 W/K
(PF 66.000 + PFA 60.000)
(PF 67.000 + PFA 60.000)
Bearing type
Power consumption
Change of air
flow direction
91 %
G 4 (DIN EN 779)
100%
Technical data
Rated voltage +/- 10%
Suitable for both
50 Hz + 60 Hz
230 V
115 V
65 W / 80 W
75 W / 90 W
400 V / 460 V 3~
AC 50 Hz / 60 Hz
PF 66.000
230 V
115 V
120 W / 155 W 115 W / 150 W 110 W / 160 W
-
400 V / 460 V 3~
on request
PF 67.000
230 V
115 V
135 W / 215 W 140 W / 195 W
We reserve the right to technical alterations.Subject to correction. 075000053
Simple click and fit!
Without tools
ELECTRO-TECHNOLOGY FOR INDUSTRY
Installation cutout:
Airflow data:
[Pa]
[Pa]
Static pressure increase
PF 65.000 / PF 66.000 / PF 67.000 IP 55
Static pressure increase
PF 65.000 / PF 66.000 / PF 67.000 IP 54
Airflow
PF 65.000, PF 66.000,
PF 67.000 + PFA 60.000
Installation cutout
291 mm x 291 mm *
Airflow
Mechanical data:
PF 65.000. PF 66.000, PF 67.000
PF 65.000, PF 66.000, PF 67.000 + PFA 60.000
PFA 60.000
157
46
150
6HDOLQJ
'LFKWXQJ
sealing
sealing
basic enclosure
design frame
%DVLFHQFORVXUH
*UXQGJHKlXVH
basic enclosure
39
design frame
/IWHUWUlJHU
320
filter
mat
)LOWHUPDW
)LOWHUPDWWH
fan
)DQ
/IWHU
fan frame
Supplementary data
Climatic data
Operating temperature
Storage temperature
Max. relative humidity
System of protection
Basic parts kit
Accessories
* Tolerance installation cutout
WLQJZDOO
mountingDJHZDQG
wall
0RXQWLQJZDOO
0RQWDJHZDQG
We reserve the right to technical alterations.Subject to correction. 075000053
protectionJDLQVWFRQWDFW
against
FKXW]
contact)DQIUDPH
Approvals
314
285
filter mat
mounting wall
PF 65.000
PF 66.000
PF 67.000
PFA 60.000
– 15 °C (+ 5 °F) to + 55 °C (+ 131 °F)
– 20 °C (- 4 °F) to + 70 °C (+ 158 °F)
90%
IP 54 or IP 55 (EN 60 529), when used as recommended
filter mat, user manual
radiant heater, fan heater, thermostat, hygrostat
291 –+ 01 thickness of material to 2mm
292 +– 01 thickness of material > 2mm ≤ 3mm
UL approval
91
EMC-shielded Filterfans
Series PF 11.000 EMC – PF67.000 EMC
PFA 10.000 EMC – PFA 60.000 EMC
When filterfans are used for cooling, it is necessary to include
openings in the enclosure that allow the electromagnetic waves to
pass in and out unimpeded. Pfannenberg has the solution: the
widest range of EMC-shielded filterfans.
At an air volume flow of 25 m3/h to 845 m3/h you will also find the
most suitable combination of EMC-shielded filterfans / exhaust
filters for your needs. In accordance with our company policy we
have dispensed with metallised plastics as these are difficult to
recycle.
New surface-to-surface contact:
unmatched, worldwide: contact surface without copper seal!!!
No extensive extra work on the installation cutout
no copper band or similar auxiliary materials to glue in place
no need to scratch away layers of material to ensure
surface-to-surface contact
surface-to-surface contact made via edge
of the cutout for the filterfan or exhaust filter
EMC – Electromagnetic compatibility
Standards define electromagnetic compatibility abbreviated to
“EMC” roughly as the ability of a component, device or system to
function satisfactorily under the influence of surrounding electromagnetic fields without inadmissibly affecting the ambience and
any other electrical equipment therein.
92
Our EMC-shielded filterfans affect the EMC shielding
of your enclosure as follows:
Damping at 30 MHz approx. 71 dB
Damping at 400 MHz approx. 57 dB
Measured according to EN 50 147 – 1 (1996)
We reserve the right to technical alterations.Subject to correction. 075000053
contact springs
EMC-shielded Filterfans IP54/IP55
EMC-shielded Exhaust Filters IP54/IP55
ELECTRO-TECHNOLOGY FOR INDUSTRY
innovative surface-to-surface contact along the edge of the cutout
NEW!
makes mounting a simple task
reliable surface-to-surface contact by means of specially shaped
contact springs on screen grid
now available as IP 55 version with significantly higher airflow
capacity and extended service life (PF 22.000 - PF 67.000)
System of
protection
(PF11.000)
Type
12
System of
protection
RAL

AC DC
System of
protection
PF11.000 PF 43.000
Fan rotating by 90°
UL approval
EMC
7035
7032
90°
®
90°
IP 54
IP 55
IP 54
UV
Colour
Time-saving
Safe installation
In-line mounting
UV resistant
(IP55)
Installation
without tools
4
Simple click and fit! Suitable for both
50 Hz + 60 Hz
Without tools
Change of air
flow direction
4 corner
fastening system
Cutout compatible Spring clip
to old range
principle
Cutout compatibility
(PF42.500 - PF 67.000)
EMC-shielded Filterfans IP 54
PF 11.000 EMC
Airflow volume
(free-flow) *
Cooling capacity
(free-flow)
Airflow volume
(in combination)*
Cooling capacity
(in combination)
Type of filter mat
Max. static pressure
25
PF 22.000 EMC
m3/h
61
PF 32.000 EMC
PF 42.500 EMC
PF 43.000 EMC
m3/h
110 m3/h
156
8 W/K
20 W/K
37 W/K
52 W/K
85 W/K
m3/h
m3/h
m3/h
m3/h
m3/h
16
(with PFA 10.000)
5 W/K
(with PFA 10.000)
44
(with PFA 20.000)
15 W/K
(with PFA 20.000)
38 Pa
60 Pa
m3/h
256
82
116
(with PFA 30.000) (with PFA 40.000)
27 W/K
39 W/K
(with PFA 30.000) (with PFA 40.000)
IP 54-filter mat G 3
66 Pa
52 Pa
PF 65.000 EMC
m3/h
480
640
Airflow volume
(free-flow) *
Cooling capacity
(free-flow)
Airflow volume
(in combination)*
Cooling capacity
(in combination)
Type of filter mat
Max. static pressure
845 m3/h
160 W/K
213 W/K
282 W/K
m3/h
m3/h
231
(with PFA 40.000)
77 W/K
(with PFA 40.000)
370
(with PFA 60.000)
123 W/K
(with PFA 60.000)
116 Pa
76 Pa
PF 22.000 EMC
PF 32.000 EMC
56 m3/h
100 m3/h
PF 42.500 EMC
145
19 W/K
33 W/K
48 W/K
78 W/K
m3/h
m3/h
m3/h
m3/h
m3/h
PF 43.000 EMC
233
40
(with PFA 20.000)
13 W/K
(with PFA 20.000)
55
(with PFA 30.000)
18 W/K
(with PFA 30.000)
109
(with PFA 40.000)
37 W/K
(with PFA 40.000)
57 Pa
61 Pa
49 Pa
PF 65.000 EMC
m3/h
180
(with PFA 40.000)
60 W/K
(with PFA 40.000)
fluted filter G 4
112 Pa
505
445
560 m3/h
(with PFA 60.000) (with PFA 60.000)
148 W/K
187 W/K
(with PFA 60.000) (with PFA 60.000)
IP 54-filter mat G 4
134 Pa
192 Pa
* at 50 Hz
PF 66.000 EMC
m3/h
770
PF 67.000 EMC
m3/h
925 m3/h
168 W/K
257 W/K
308 W/K
m3/h
m3/h
380
(with PFA 60.000)
113 W/K
(with PFA 60.000)
490
(with PFA 60.000)
147 W/K
(with PFA 60.000)
74 Pa
134 Pa
570 m3/h
(with PFA 60.000)
190 W/K
(with PFA 60.000)
187 Pa
* at 50 Hz
EMC-shielded Filterfans IP 54 / IP 55
Model
Rated voltages
available
Height x Width
Installation depth
Cutout dimensions
Operating temperature
Storage temperature
Material
EMC shielding
Approvals
PF 11.000 EMC
AC
DC
PF 22.000 EMC
PF 32.000 EMC
PF 42.500 EMC
PF 43.000 EMC
PF 67.000 EMC
m3/h
EMC-shielded Filterfans IP 55
Model
PF 66.000 EMC
m3/h
PF 65.000 EMC
PF 66.000 EMC
PF 67.000 EMC
230 V, 115 V
230 V, 115 V
230 V, 115 V
230 V, 115 V
230V, 115V, 400V 2~
230V, 115V
230V, 115V, 3x400V 230V, 115V, 3x400V
12 V, 24 V, 48 V
12 V, 24 V, 48 V
12 V, 24 V, 48 V
12 V, 24 V, 48 V
12 V, 24 V, 48 V
109 x 109 mm
145 x 145 mm
202 x 202 mm
252 x 252 mm
252 x 252 mm
320 x 320 mm
320 x 320 mm
320 x 320 mm
AC 62 / DC 49 mm AC 70 / DC 64 mm AC 87 / DC 81 mm
97 mm
AC 113 / DC 97 mm
150 mm
150 mm
150 mm
93 mm ± 0,5 mm 126,5 mm ± 0,5 mm 178 mm ± 0,5 mm 224 mm ± 0,5 mm 224 mm ± 0,5 mm 292 mm ± 0,5 mm 292 mm ± 0,5 mm 292 mm ± 0,5 mm
– 15 °C (+ 5 °F) to + 55 °C (+ 131 °F)
– 20 °C (– 4 °F) to + 70 °C (+ 58 °F)
thermoplastic, self-extinguishing, UL 94 VO, IP 55: UV resistant
stainless steel
UL approval
EMC-shielded Exhaust Filters IP 54 / IP 55
Model
H x W x ID
Cutout dimensions
Material
EMC shielding
PFA 10.000 EMC (IP 54)
109 x 109 x 19 mm
93 mm ± 0,5 mm
PFA 40.000 EMC
PFA 60.000 EMC
145 x 145 x 26 mm
202 x 202 x 34 mm
252 x 252 x 38 mm
126,5 mm ± 0,5 mm
178 mm ± 0,5 mm
224 mm ± 0,5 mm
thermoplastic, self-extinguishing, UL 94 VO, IP 55: UV resistant
stainless steel
PFA 20.000 EMC
PFA 30.000 EMC
320 x 320 x 39 mm
292 mm ± 0,5 mm
93
We reserve the right to technical alterations.Subject to correction. 075000053
Model
Filterfans 3rd Generation - Overview
Filterfan - Model PF
System of
protection
Click and fit!
Model
PF 1.000*
PF 2.000
PF 2.500
Installation
without tools
only for
PF 2000 – PF 6000
Airflow / Cooling capacity
free-flow
in combination PF + PFA
Rated voltage
Power
230V / 115V AC
12W / 12W
12V / 24V / 48V DC 2,4W / 2,4W / 2,6W
230V / 115V AC
19W / 20W
12V / 24V / 48V DC
5,0W
230V / 115V AC
18W / 18W
12V / 24V / 48V DC 5W / 4,7W / 4,6W
230V / 115V AC
PF 3.000
… “click and fit“ –
the patented quick-action snap-fit system for rapid installation of filterfans without screws or bolts
(PF 2000 EMC – PF 6000 EMC filterfans see page 107)
EMC
IP 54
15 m3/h / 5 W/K
41W
UL
version
yes
(PF 1.000 + PFA 1.000)
92 x 92 mm
92 x 92 mm
58 m3/h / 19 W/K
43 m3/h / 14 W/K
(PF 2.000 + PFA 2.000)
125 x 125 mm
126 x 126 mm
yes
98
155 m3/h / 52 W/K
108 m3/h / 36 W/K
(PF 2.500 + PFA 3.000)
223 x 223 mm
224 x 224 mm
yes
100
255 m3/h / 85 W/K
231 m3/h / 77 W/K
(PF 3.000 + PFA 3.000)
-
230V / 115V AC
74W / 82W
PF 6.000
~400V / 3 phases
50 / 60 Hz
230V / 115V AC
110W / 160 W
230V / 115V AC
195W / 165W
400V / 3 phases
50 / 60 Hz
106W / 145 W
PF 7.000
96
yes
223 x 223 mm
224 x 224 mm
-
12V / 24V / 48V DC 12W / 18W / 17W
PF 5.000
page
24 m3/h / 8 W/K
45W / 40W
~ 400V / 50/60 Hz
Installation cutout at wall thickness
≤2mm
>2mm ≤3mm
100
yes
478 m3/h / 159 W/K
368 m3/h / 122 W/K
(PF 5.000 + PFA 6.000)
291 x 291 mm
292 x 292 mm
yes
102
606 m3/h / 201 W/K
437 m3/h / 145 W/K
(PF 6.000 + PFA 6.000)
291 x 291 mm
292 x 292 mm
yes
102
755 m3/h / 245 W/K
545 m3/h / 175 W/K
PF 7.000 + PFA 6.000
291 x 291 mm
292 x 292 mm
yes
102
165W / 155W
Exhaust Filters - Model PFA
Installation cutout at wall thickness
≤2mm
>2mm ≤3mm
Model
PFA 1.000
PFA 2.000
*
92 x 92 mm
125 x 125 mm
92 x 92 mm
126 x 126 mm
UL
version
page
Model
Installation cutout at wall thickness
≤ 2mm
>2mm ≤3mm
yes
yes
104
104
PFA 3.000
223 x 223 mm
PFA 6.000
291 x 291 mm
UL
version
page
224 x 224 mm
yes
104
292 x 292 mm
yes
104
PF 1.000 IP 43
Filterfans - Model PF IP 55
Click and fit!
Installation
without tools
System of
protection
EMC
UV
UV resistant
only for
PF 2000 – PF 6000
… “click and fit“ –
the patented quick-action snap-fit system for rapid installation of filterfans without
screws or bolts
Airflow
Installation cutout at wall thickness
≤ 2mm
>2mm ≤3mm
UL
version page
Model
Rated voltage
Power
free-flow
in combination PF + PFA
PF 2.000
230V / 115V
19 W / 20W
28 m3/h; 50Hz /32 m3/h; 60Hz
20 m3/h; 50Hz / 23 m3/h; 60Hz
(PF 2.000 und PFA 2.000)
125 x 125 mm
126 x 126 mm
yes
108
PF 2.500
230V / 115V
19W / 18 W
87 m3/h; 50Hz /103 m3/h; 60Hz
55 m3/h; 50Hz / 64 m3/h; 60Hz
(PF 2.500 und PFA 3.000)
223 x 223 mm
224 x 224 mm
yes
108
(PF 3.000 und PFA 3.000)
223 x 223 mm
224 x 224 mm
yes
108
114 m3/h; 50Hz / 134 m3/h; 60Hz
PF 3.000
230V / 115V
45W / 40W
134 m3/h; 50Hz /161 m3/h; 60Hz
PF 5.000
230 V / 115 V
74 W / 82 W
319 m3/h; 50 Hz / 374 m3/h; 60 Hz
255 m3/h; 50 Hz / 299 m3/h; 60 Hz
(PF 5.000 und PFA 6.000)
291 x 291 mm
292 x 292 mm
yes
108
PF 6.000
230V / 115V
165W / 155W 379 m3/h; 50Hz /404 m3/h; 60Hz
281 m3/h; 50Hz / 312 m3/h; 60Hz
(PF 6.000 und PFA 6.000)
291 x 291 mm
292 x 292 mm
yes
108
291 x 291 mm
292 x 292 mm
yes
108
PF 7.000
230V / 115V
185 W / 165W 415 m3/h; 50Hz /477 m3/h; 60Hz
327 m3/h; 50Hz / 376 m3/h; 60Hz
(PF 7.000 und PFA 6.000)
Exhaust Filters - Model PFA IP 55
Model
Installation cutout at wall thickness
≤2mm
>2mm ≤3mm
Exhaust Filters - Model PF EMC IP 55
UL
version
page
Model
Installation cutout bei
Wandstärke ≤3mm
UL
version
page
PFA 2.000
125 x 125 mm
126 x 126 mm
yes
110
PFA 2.000
126,5 x 126,5 mm ±0,5
yes
107
PFA 3.000
223 x 223 mm
224 x 224 mm
yes
110
PFA 3.000
224 x 224 mm ±0,5
yes
107
PFA 6.000
291 x 291 mm
292 x 292 mm
yes
110
PFA 6.000
292 x 292 mm ±0,5
yes
107
Other voltages are available on request for all filterfans
94
We reserve the right to technical alterations.Subject to correction. 075000053
IP 55
ELECTRO-TECHNOLOGY FOR INDUSTRY
PF-Series Slim Line – Filterlüfter with geringer Installation depth
IP 54
Click and fit!
… “click and fit“ –
the patented quick-action snap-fit system for rapid installation of filterfans without screws or bolts
Installation
without tools
System of
protection
Model
Rated voltage
Power
PF 3000 SL 207…244V / 103…122V 46/44W / 48/48W
PF 6000 SL2 207…244V / 103…122V 92/88W / 96/92W
PF6500 SL1 207…244V / 103…122V 64/80W / 64/80 W
IP 33
Click and fit!
Model
IP 54
System of
protection
System of
protection
Installation
without tools
Airflow
free-flow
in combination PF + PFA
140 m3/h 114 m3/h (PF 3000 SL + PFA 3000)
260 m3/h 205 m3/h (PF 6000 SL2 + PFA 6000)
545 m3/h 410 m3/h (PF 6500 SL1 + PFA 6000)
50 Hz
60 Hz
4x28 / 4x29 W 4x24 / 4x24 W
UL
version
yes
yes
yes
page
112
113
114
Top Fans Series PTF NEW!
Filterfans for roof mounting
Power
Rated voltage
Installation cutout at wall thickness
≤2mm
>2mm ≤3mm
223 x 223 mm
224 x 224 mm
291 x 291 mm
292 x 292 mm
291 x 291 mm
292 x 292 mm
free-flow [m3/h]
Airflow
in combination PTF + PFA [m3/h]
Installation cutout
500 (IP 33); 350 (IP 54)
260 (IP 33); 230 (IP 54) (PTF 60.500 + PFA 6000)
291 x 291 mm*
PTF 60.500
230V / 115V
PTF 60.700
230V / 115V
65 / 75 W
80 / 90 W
700 (IP 33); 550 (IP 54)
400 (IP 33); 350 (IP 54) (PTF 60.7000 + PFA 6000)
291 x 291 mm*
PTF 61.000
230V / 115V
115 / 110 W
150 / 170 W
1000 (IP 33); 750 (IP 54)
550 (IP 33); 470 (IP 54) (PTF 61.0000 + PFA 6000)
291 x 291 mm*
UL version page
yes
116
yes
116
yes
116
* depending on wall thickness
Top Exhaust Filters for roof mounting - Model PTFA
PTFA 60.000
Installation cutout at wall thickness
≤ 2mm
>2mm ≤ 3mm
291 x 291 mm
Model
FLF 02
FLF 01
FLF 0-E
FLF 0
FLF I
FLF II
FLF III
UL version page
yes
117
Filterfans for Enclosures - Model FLF
IP 54
Screw mounting
292 x 292 mm
System of protection
(FLF 02 IP 43)
Rated voltage
Power
230V / 115V AC
12V / 24V / 48V DC
230V / 115V AC
12V / 24V DC
230V / 115V AC
12V / 24V / 48V DC
230V / 115V AC
12V / 24V / 48V DC
230V / 115V AC
230V / 115V AC
230V / 115V AC
3x400V AC
19W
5W
19W
5W
19W
5W
19W
5W
19W
41W
165W / 155W
110W / 160W
free-flow
Airflow
in combination FLF + AFF
63 m3/h
38 m3/h (FLF 02 + AFF 02)
Ø 116 mm
115
59 m3/h
37 m3/h (FLF 01 + AFF 01)
Ø 116 mm
115
200 x 200 mm
115
58 m3/h
(integrated)
Installation cutout UL version page
73 m3/h
63 m3/h (FLF 0 + AFF 0)
200 x 200 mm
115
71 m3/h
184 m3/h
65 m3/h (FLF I + AFF I)
151 m3/h (FLF II + AFF I)
300 x 200 mm
300 x 200 mm
115
115
756 m3/h
591 m3/h (FLF III + AFF III)
300 x 300 mm
115
Exhaust Filters for Enclosures - Model AFF
Model
AFF 02
AFF 01
AFF 0
AFF I
AFF III
Installation cutout
Ø 116
Ø 116
200 x 200 mm
300 x 200 mm
300 x 300 mm
UL version
page
115
115
115
115
115
Other voltages are available on request for all filterfans
95
We reserve the right to technical alterations.Subject to correction. 075000053
Model
Filterfan PF1.000
PF1.000
For versatile incorporation into equipment. Examples are in the medical
industry, in EDP equipment, warning and control enclosures and also
for low power applications.
AC
IP 43
DC
System of protection
RAL
Click and fit!
Colour
Installation
without tools
Airflow data
PF 1.000
150 g/m2
Filter material (standard grade)
Unimpeded airflow
24 m3/h; 50 Hz / 28 m3/h; 60 Hz
Capacity free-flow
8 W/K / 9 W/K
Airflow in combination
(filterfan + exhaust filter)
15 m3/h; 50 Hz / 17 m3/h; 60 Hz
(PF 1.000 + PFA 1.000)
Capacity in combination
(filterfan + exhaust filter)
5 W/K / 6 W/K
(PF 1.000 + PFA 1.000)
Max. static pressure
(Airflow = 0 m3/h)
29 Pa
Filtration efficiency
73%
Filter material grade (DIN EN 779)
G2
Noise level (DIN 45 635)
39 dB (A)
Duty cycle
100%
Technical data
Outside dimensions in mm
(Height x Width x Installation depth)
Bearing type
Fitting position
DC
105 x 105 x 52
105 x 105 x 44
sleeve bearings
ball bearings
horizontal – vertical
Construction
any
housing and guard of sprayed thermoplastic (PC-FR)
self-extinguishing, UL 94 VO
Weight
0,60 kg
0,45 kg
Safety protection
according to EN 60529
Colour
RAL 7035, RAL 7032 or black, other colours available on request
Type of connection
2 wires, 310 mm long
Electrical data
PF 1.000
AC 50 Hz / 60 Hz
Rated voltage
230 V
115 V
12 V
DC
24 V
48 V
Voltage range
187 V … 253 V
97 V … 127 V
7 V … 15 V
14 V … 28 V
36 V … 56 V
12 W / 11 W
12 W / 11 W
2,4 W
2,4 W
2,6 W
Power consumption
96
We reserve the right to technical alterations.Subject to correction. 075000053
PF 1.000
AC
ELECTRO-TECHNOLOGY FOR INDUSTRY
Airflow data:
[Pa]
PF 1.000
29
Static pressure increase
PF 1.000
PFA 1.000
Airflow
15
24 [m3/h]
mounting wall
basic enclosure
connection cable
Mechanical data:
design cover
Installation cutout
fan
105
100
Installation cutout
92 mm x 92 mm*
standard punch size
filter mat
Supplementary data
44 mm DC version
52 mm AC version
4
AC
We reserve the right to technical alterations.Subject to correction. 075000053
protection
against
contact
DC
Climatic data
Operating temperature
– 10 °C to + 60 °C
– 20 °C to + 60 °C
Storage temperature
Max. relative humidity
System of protection
Basic parts kit
Accessories
Approvals
* Tolerance installation cutout
– 20 °C to + 70 °C
90%
IP 43 (EN 60 529), when used as recommended, not for outdoor-application
standard filter, mounting- and user manual
radiant heater, fan heater, thermostat, see Thermal Management
UL approval see overview filterfans
92 +– 01
97
Filterfan PF2.000
PF 2.000
For a broad range of applications in electronics as well as conventional
switchgear installations; a wide range of operating voltages ensures
universal usability.
with integrated foamed on seal
IP 54
AC
IP 55
DC
System of protection System of protection
(see page 108)
Click and fit!
Installation
without tools
RAL
Colour
Airflow data
PF 2.000
150 g/m2
Filter material*
Unimpeded airflow
58 m3/h; 50 Hz / 65 m3/h; 60 Hz
Capacity free-flow
19 W/K / 22 W/K
Airflow in combination
(filterfan + exhaust filter)
43 m3/h; 50 Hz / 49 m3/h; 60 Hz
(PF 2.000 + PFA 2.000)
Capacity in combination
(filterfan + exhaust filter)
14 W/K / 16 W/K
(PF 2.000 + PFA 2.000)
Max. static pressure
(Airflow = 0 m3/h)
61 Pa
Filtration efficiency
73%
Filter material grade (DIN EN 779)
G2
Noise level (DIN 45 635)
49 dB (A)
Duty cycle
100%
* standard filter mat 150 g/m2 (alternative filter mat in 350 g/m2, 500 g/m2)
Technical data
Outside dimensions in mm
(Height x Width x Installation depth)
Bearing type
Fitting position
DC
150 x 150 x 72
150 x 150 x 66
sleeve bearings
ball bearings
horizontal – vertical
any
Construction
housing and guard of sprayed thermoplastic (ABS-FR)
self-extinguishing, UL 94 VO
Weight
0,735 kg
0,385 kg
Safety protection
according to EN 60529
Colour
RAL 7035, RAL 7032 oder schwarz, other colours available on request
Type of connection
terminal strip
2 wires, 310 mm long
Electrical data
PF 2.000
AC 50 Hz / 60 Hz
Rated voltage
230 V
115 V
12 V
DC
24 V
48 V
Voltage range
187 V … 253 V
97 V … 127 V
6 V … 14 V
18 V … 30 V
36 V … 56 V
19 W / 18 W
20 W
5W
5W
5W
Power consumption
98
We reserve the right to technical alterations.Subject to correction. 075000053
PF 2.000
AC
ELECTRO-TECHNOLOGY FOR INDUSTRY
Airflow data:
PF 2.000
[Pa]
61
Static pressure increase
PF 2.000
PFA 2.000
Airflow
43
58 [m3/h]
basic enclosure
Mechanical data:
plug-in
termination
fan
sealing
Installation cutout
design cover
119
145
150
Installation cutout
125 mm x 125 mm *
filter mat
protection
against contact
4
mounting
wall
Supplementary data
AC
We reserve the right to technical alterations.Subject to correction. 075000053
66 mm DC version
72 mm AC version
DC
Climatic data
Operating temperature
–10°C to +55°C
–20°C to +55°C
Storage temperature
–20°C to +70°C
Max. relative humidity
90%
System of protection
Basic parts kit
Accessories
* Tolerance installation cutout
Approvals
IP54 (EN 60529), when used as recommended, not for outdoor-application
standard filter, mounting- and user manual
radiant heater, fan heater, thermostat, see Thermal Management
125 +– 01 thickness of material to 2mm
126 +– 01 thickness of material > 2mm ≤ 3mm
UL approval see overview filterfans
99
Filterfan PF2.500, PF3.000
PF 2.500
For medium range applications in plant and machine equipment.
PF 3.000
The same size PF 2.500 but with a more powerful fan.
with integrated foamed on seal
(PF 2.500, PF 3.000)
IP 54
AC
IP 55
DC
System of protection System of protection
(see page 108)
Click and fit!
Cutout
compatibility
RAL
Colour
Installation
without tools
Airflow data
PF 2.500
150 g/m2
Filter marerial*
Unimpeded airflow
155 m3/h; 50 Hz / 170 m3/h; 60 Hz
Capacity free-flow
52 W/K / 57 W/K
Airflow in combination
108 m3/h; 50 Hz / 118 m3/h; 60 Hz
(filterfan + exhaust filter)
(PF 2.500 + PFA 3.000)
Capacity in combination
36 W/K / 39 W/K
(filterfan + exhaust filter)
(PF 3.000 + PFA 3.000)
Max. static pressure
62 Pa
(Airflow = 0 m3/h)
Filtration efficiency
Filter material grade (DIN EN 779)
Noise level (DIN 45 635)
53 dB (A)
Duty cycle
* standard filter mat 150 g/m2 (alternative filter mat in 350 g/m2, 500 g/m2)
Technical data
PF 3.000
150 g/m2
255 m3/h; 50 Hz / 292 m3/h; 60 Hz
85 W/K / 97 W/K
231 m3/h; 50 Hz / 265 m3/h; 60 Hz
(PF 3.000 + PFA 3.000)
77 W/K / 88 W/K
(PF 3.000 + PFA 3.000)
115 Pa
73%
G2
55 dB (A)
100%
PF 2.500
AC / DC
Outside dimensions in mm
(Height x Width x Installation depth)
PF 3.000
AC
250 x 250 x 111
DC
250 x 250 x 121
Bearing type
ball bearings
any, horizontal airflow preferred
Construction
housing and guard of sprayed thermoplastic (ABS-FR)
self-extinguishing, UL 94 VO
Weight
1,75 kg
1,75 kg
Safety protection
1,50 kg
according to EN 60529
Colour
RAL 7035, RAL 7032 or black, other colours available on request
Type of connection
terminal strip
Electrical data
PF 2.500
AC 50 Hz / 60 Hz
Rated voltage
230 V
115 V
12 V
DC
24 V
48 V
Voltage range
187 V … 253 V
97 V … 127 V
8 V … 14 V
18 V … 30 V
36 V … 56 V
18 W / 17 W
18 W / 17 W
4,5 W
4,7 W
4,6 W
48 V
Power consumption
PF 3.000
Rated voltage
400 V
AC 50 Hz / 60 Hz
230 V
115 V
12 V
DC
24 V
Voltage range
360 V … 440 V
187 V … 253 V
97 V … 127 V
8 V … 15 V
18 V … 30 V
36 V … 56 V
41 W / 38 W
45 W / 39 W
40 W
12 W
18 W
17 W
Power consumption
100
We reserve the right to technical alterations.Subject to correction. 075000053
Fitting position
ELECTRO-TECHNOLOGY FOR INDUSTRY
Airflow data:
PF 2.500
[Pa]
62
Static pressure increase
PF 2.500
PFA 3.000
Airflow
[Pa]
108
155 [m3/h]
PF 3.000
115
Static pressure increase
PF 3.000
PFA 3.000
Airflow
231
255 [m3/h]
sealing
Mechanical data:
Installation cutout
basic enclosure
fan frame
221
245
Installation cutout
223 mm x 223 mm *
PF 2.500 = 127
PF 3.000 = Ø 171,5
(PF 2.500 + PF 3.000)
250
design frame
PF 2.500 = 111
PF 3.000 = 121
fan
Supplementary data
6
We reserve the right to technical alterations.Subject to correction. 075000053
filter mat
mounting
wall
AC
DC
Climatic data
Operating temperature
Storage temperature
Max. relative humidity
System of protection
Basic parts kit
Accessories
Approvals
* Tolerance installation cutout
– 10 °C to + 55 °C
– 20 °C to + 55 °C
– 20 °C to + 70 °C
90%
IP 54 (EN 60 529), when used as recommended, not for outdoor-application
standard filter, mounting- and user manual
radiant heater, fan heater, thermostat, see Thermal Management
UL approval see overview filterfans
223 +– 01 thickness of material to 2mm
224 +– 01 thickness of material > 2mm ≤ 3mm
101
Cutout
compatible with
DTFI cooling unit
(see page 24)
Filterfan PF5.000, PF6.000, PF7.000
PF 5.000
For larger switchgear installations with higher demands for heat
extraction.
PF6.000 / PF7.000
For large switchgear installations where extreme heat extraction is
needed whilst maintaining the required I.P. protection rating.
with integrated foamed on seal
IP 54
System of protection System of protection
(see page 108)
Airflow data
RAL
IP 55
Click and fit!
Ausschnittkompatibilität
Colour
Installation
without tools
PF 5.000
150 g/m2
PF 6.000
150 g/m2
PF 7.000
150 g/m2
Unimpeded airflow
478 m3/h; 50 Hz / 550 m3/h; 60 Hz
606 m3/h; 50 Hz / 647 m3/h; 60 Hz
755 m3/h; 50 Hz / 830 m3/h; 60 Hz
Capacity free-flow
159 W/K / 183 W/K
201 W/K / 215 W/K
245 W/K / 277 W/K
Airflow in combination
(filterfan + exhaust filter)
368 m3/h; 50 Hz / 423 m3/h; 60 Hz
(PF 5.000 + PFA 6.000)
437 m3/h; 50 Hz / 476 m3/h; 60 Hz
(PF 6.000 + PFA 6.000)
545 m3/h; 50 Hz / 626 m3/h; 60 Hz
(PF 7.000 + PFA 6.000)
Capacity in combination
(filterfan + exhaust filter)
122 W/K / 141 W/K
(PF 5.000 + PFA 6.000)
145 W/K / 155 W/K
(PF 6.000 + PFA 6.000)
175 W/K / 202 W/K
(PF 7.000 + PFA 6.000)
202 Pa
243 Pa
158 Pa
Filter material*
Max. static pressure
(Airflow = 0 m3/h)
Filtration efficiency
73%
Filter material grade (DIN EN 779)
G2
Noise level (DIN 45 635)
69 dB (A)
71 dB (A)
Duty cycle
72 dB (A)
100%
* standard filter mat 150 g/m2 (alternative filter mat in 350 g/m2, 500 g/m2)
Technical data
Outside dimensions in mm
(Height x Width x Installation depth)
PF 5.000
PF 6.000
PF 7.000
325 x 325 x 157
325 x 325 x 158
325 x 325 x 117
ball bearings
Fitting position
any, horizontal airflow preferred
Construction
housing and guard of sprayed thermoplastic (ABS-FR)
self-extinguishing, UL 94 VO
Weight
3,0 kg
3,5 kg
Safety protection
Colour
RAL 7035, RAL 7032, other colours available on request
Type of connection
terminal strip
Electrical data
PF 5.000
AC 50 Hz / 60 Hz
PF 6.000
230 V
115 V
Rated voltage
230 V
115 V
400 V / 3 phases
Voltage range
190 V … 253 V
103 V … 127 V
360 V … 440 V
190 V … 253 V
74 W
82 W
110 W / 160 W
165 W
Power consumption
102
3,55 kg
according to EN 60529
97 V … 127 V
230 V
PF 7.000
115 V
400 V / 3 phases
190 V … 253 V
97 V … 127 V
360 V … 440 V
110 W / 155 W 135 W / 195 W 120 W / 165 W 106 W / 145 W
We reserve the right to technical alterations.Subject to correction. 075000053
Bearing type
ELECTRO-TECHNOLOGY FOR INDUSTRY
Airflow data:
[Pa]
PF 5.000
PF 6.000
[Pa]
202
[Pa]
243
158
PF 5.000
Airflow
368
Static pressure increase
PF 7.000
Static pressure increase
Static pressure increase
PF 6.000
PFA 5.000
PF 7.000
PFA 6.000
Airflow
478 [m3/h]
437
PFA 6.000
Airflow
606 [m3/h]
545
755 [m3/h]
sealing
Mechanical data:
basic enclosure
design
frame
fan frame
(PF 5.000 + PF 6.000 + PF 7.000)
Installation cutout
289
PF 5.000 = Ø 202
PF 6.000 = Ø 258
PF 7.000 = 282
318
325
Installation cutout
291 mm x 291 mm *
filter
mat
fan
PF 5.000 = 157 6
PF 6.000 = 158
mounting wall
Supplementary data
PF 5.000
PF 6.000
We reserve the right to technical alterations.Subject to correction. 075000053
PF 7.000 = 117
PF 7.000
Climatic data
Operating temperature
– 10 °C to + 55 °C
Storage temperature
– 20 °C to + 70 °C
Max. relative humidity
90%
System of protection
Basic parts kit
Accessories
* Tolerance installation cutout
Approvals
IP 54 (EN 60 529), when used as recommended, not for outdoor-application
standard filter, mounting- and user manual
radiant heater, fan heater, thermostat, see Thermal Management
291 +– 01 thickness of material to 2mm
292 +– 01 thickness of material > 2mm ≤ 3mm
UL approval see overview filterfans
103
Exhaust Filters - Model PFA
mounting wall
basic enclosure
design cover
PFA1.000
100
105
Installation cutout:
92 mm x 92 mm
standard punch size
tolerance –+01
filter
mat
4
outside dimensions 105 mm x 105 mm
10
basic enclosure
sealing
design cover
PFA2.000
150
145
Installation cutout:
125 mm x 125 mm
tolerance –+01
thickness of material to 2 mm
126 mm x 126 mm
tolerance –+01
thickness
of material > 2 mm ≤3 mm
filter mat
27
4
mounting
wall
outside dimensions 150 mm x 150 mm
sealing
basic enclosure
design frame
Installation cutout:
223 mm x 223 mm
tolerance –+01
thickness of material to 2 mm
224 mm x 224 mm
tolerance –+01
thickness
of material > 2 mm ≤ 3 mm
filter
mat
sealing
basic
enclosure
PFA5.000/6.000/7.000
mounting
wall
6
30
outside dimensions 250 mm x 250 mm
design frame
318
325
Installation cutout:
291 mm x 291 mm
tolerance –+01
thickness of material to 2 mm
292 mm x 292 mm
tolerance –+01
thickness
of material > 2 mm ≤ 3 mm
outside dimensions 325 mm x 325 mm
104
6
30
filter
mat
mounting
wall
We reserve the right to technical alterations.Subject to correction. 075000053
250
245
PFA2.500/3.000
„ ... click and fit!“
ELECTRO-TECHNOLOGY FOR INDUSTRY
same design as the filterfans PF-series
Pfannenberg developed and patented snap-fastening
„ ...click and fit“
for door mounting in accordance with VDE 0113 (EN 60204)
IP 43
IP 54
System of
protection
(only PFA 1.000)
System of
protection
RAL
IP 55
System of
protection
(see page 110)
Click and fit!
Installation
without tools
Colour
without screws
easy filter exchange during use
with integrated foamed seal to enclosure
(from size PF 2.000)
Airflow data
PFA 1.000
Filter mat
150 g/m2 *)
150 g/m2 *)
Filtration efficiency
73%
73%
Filter material grade
(DIN EN 779)
G2
G2
PFA 2.000
PFA 3.000
PFA 6.000
*) standard filter mat 150 g/m2 (alternative filter mat in 350 g/m2, 500 g/m2)
Outside dimensions in mm
(Height x Width x Installation depth)
PFA 1.000
PFA 2.000
PFA 3.000
PFA 6.000
105 x 105 x 10
150 x 150 x 27
250 x 250 x 30
325 x 325 x 30
Material
sprayed thermoplastic, self-extinguishing, UL 94 VO
(PC-FR)
Weight
0,050 kg
Colour
Supplementary data
(ABS-FR)
0,126 kg
0,460 kg
0,755 kg
RAL 7035, RAL 7032 or black, other colours available on request
PFA 1.000
PFA 2.000
PFA 3.000
We reserve the right to technical alterations.Subject to correction. 075000053
Technical data
PFA 6.000
Climatic data
Operating temperature
– 20 °C to + 70 °C
Storage temperature
– 20 °C to + 70 °C
Max. relative humidity
90%
System of protection
Basic parts kit
Accessories
Approvals
IP 43
IP 54
standard filter, mounting- and user manual
radiant heater, fan heater, thermostat, see Thermal Management
UL approval see overview filterfans
105
Performance selection diagram
for filterfans according to temperature difference - Series PF/PFA IP 54
8000
PF 7.000
PF 6.000
PF 7.000 + PFA 6.000
PF 6.000 + PFA 6.000
PF 5.000
PF 5.000 + PFA 6.000
6000
5000
4000
3000
page 82
page 82
page 82 + 84
page 82 + 84
page 82
page 82 + 84
PF 3.000
page 80
PF 3.000 + PFA 3.000 page 80+84
2000
PF 2.500
1000
page 80
PF 2.500 + PFA 3.000 page 80+84
800
600
PF 2.000
500
page 78
400
PF 2.000 + PFA 2.000 page 78+84
300
PF 1.000
page 76
200
PF 1.000 + PFA 1.000 page 76+84
100
80
50
40
Dissipation loss Pv [W]
30
Application example:
dissipation loss 500 Watt
temperature difference 20 Kelvin
= PF2.500 + PFA3.000
20
10
0
5
10
Temperature difference ΔT [K]
106
15
20
25
30
35
We reserve the right to technical alterations.Subject to correction. 075000053
60
EMC-shielded Filterfans IP54/IP55
Series PF2000 EMC – PF6000 EMC
PFA2000 EMC – PFA6000 EMC
ELECTRO-TECHNOLOGY FOR INDUSTRY
innovative surface-to-surface contact along the edge of the cutout
makes mounting a simple task
reliable surface-to-surface contact by means of specially shaped
contact springs on screen grid
low environmental impact due to use of separate screen grids made
of stainless steel (1.4301)
low environmental impact because grid plates and contact surfaces
are in one piece; beryllium copper band is not necessary to provide
contact
IP 54
System of
protection
IP 55
AC
DC
System of
protection
EMC
Click and fit!
Installation
without tools
UV
UV resistant
EMC-shielded Filterfans IP 54
Filterfan/Model
Airflow volume
(free-flow)
Cooling capacity
(free-flow)
Airflow volume
(with exhaust filter)
Cooling capacity
(with exhaust filter)
Type of filter mat
Max. static pressure
PF 2000 EMC
56
PF 2500 EMC
m3/h
131
m3/h
PF 3000 EMC
249 m3/h
PF 5000 EMC
461
PF 6000 EMC
m3/h
590 m3/h
18,6 W/K
44 W/K
83 W/K
153 W/K
196 W/K
42 m3/h
(with PFA 2000 EMC)
14 W/K
(with PFA 2000 EMC)
95 m3/h
(with PFA 3000 EMC)
32 W/K
(with PFA 3000 EMC)
350 m3/h
(with PFA 6000 EMC)
116 W/K
(with PFA 6000 EMC)
450 m3/h
(with PFA 6000 EMC)
149 W/K
(with PFA 6000 EMC)
55 Pa
60 Pa
210 m3/h
(with PFA 3000 EMC)
70 W/K
(with PFA 3000 EMC)
150 g/m2 G 2
103 Pa
195 Pa
210 Pa
PF 2000 EMC
PF 2500 EMC
PF 3000 EMC
PF 5000 EMC
PF 6000 EMC
26 m3/h
80 m3/h
130 m3/h
310 m3/h
371 m3/h
Filterfan/Model
Airflow volume
(free-flow)
Cooling capacity
(free-flow)
Airflow volume
(with exhaust filter)
Cooling capacity
(with exhaust filter)
Type of filter mat
Max. static pressure
Filterfan/Model
Noise level
Rated voltages
available
Height x Width x Depth
Cutout dimensions
Operating temperature
Storage temperature
Material
EMC shielding
Approvals
Exhaust filter/Model
Height x Width x Depth
Cutout dimensions
Material
EMC shielding
8,4 W/K
25 W/K
42 W/K
100 W/K
119 W/K
19 m3/h
(with PFA 2000 EMC)
6,5 W/K
(with PFA 2000 EMC)
52 m3/h
(with PFA 3000 EMC)
17 W/K
(with PFA 3000 EMC)
248 m3/h
(with PFA 6000 EMC)
80 W/K
(with PFA 6000 EMC)
325 m3/h
(with PFA 6000 EMC)
105 W/K
(with PFA 6000 EMC)
46 Pa
52 Pa
104 m3/h
(with PFA 3000 EMC)
34 W/K
(with PFA 3000 EMC)
150 g/m2 und 350 g/m2 G 4
91 Pa
156 Pa
172 Pa
PF 2000 EMC (IP 54 /IP 55)
48 dB (A)
230 V AC, 115 V AC
12 V, 24 V, 48 V DC
150 x 150 x 69 mm
126,5 ± 0,5 mm
PF 2500 EMC (IP 54 /IP 55) PF 3000 EMC (IP 54 /IP 55) PF 5000 EMC (IP 54 /IP 55)
49 dB (A)
52 dB (A)
68 dB (A)
230 V AC, 115 V AC
230 V AC, 115 V AC
230 V AC, 115 V AC
12 V DC, 24 V DC
12 V, 24 V, 48 V DC
250 x 250 x 111 mm
250 x 250 x 121 mm
325 x 325 x 157 mm
224 ± 0,5 mm
224 ± 0,5 mm
292 ± 0,5 mm
–10 °C to +55 °C
–20 °C to +70 °C
ABS plastic material, UL 94-VO
stainless steel
UL approval see overview filterfans
PFA 2000 EMC
150 x 150 x 28 mm
126,5 ± 0,5 mm
PFA 3000 EMC
250 x 250 x 36 mm
224 ± 0,5
ABS plastic material, UL 94-VO
stainless steel
PF 6000 EMC (IP 54 /IP 55)
70 dB (A)
230 V AC, 115 V AC
3 x 400 V AC
325 x 325 x 158 mm
292 ± 0,5 mm
– 25 °C to +55 °C
PFA 6000 EMC
325 x 325 x 36 mm
292 ± 0,5
107
We reserve the right to technical alterations.Subject to correction. 075000053
EMC-shielded Filterfans IP 55
Filterfans - Model PF IP 55
Filterfans in the PF range set the pace in terms of technology and
power. TÜV-tested with distinction. So they provide values you can
count on. Designed for a wide, universal range of applications in electronic and traditional switchgear engineering.
for outdoor applications
with integrated foamed seal to enclosure
IP 55
AC
DC
System of
protection
Click and fit!
PF 2.000
PF 2.500
PF 3.000
PF 5.000
350 g/m2 und 150 g/m2
Unimpeded airflow
28 m3/h; 50 Hz /
32 m3/h; 60 Hz
87 m3/h; 50 Hz /
103 m3/h; 60 Hz
134 m3/h; 50 Hz /
161 m3/h; 60 Hz
Capacity free-flow
9 W/K / 11 W/K
29 W/K / 34 W/K
45 W/K / 54 W/K
UV resistant
PF 6.000
PF 7.000
319 m3/h; 50 Hz /
374 m3/h; 60 Hz
379 m3/h; 50 Hz /
404 m3/h; 60 Hz
415 m3/h; 50 Hz /
477 m3/h; 60 Hz
106 W/K / 124 W/K
122 W/K / 130 W/K
134 W/K / 154 W/K
Airflow in combination
(filterfan + exhaust filter)
20
50 Hz /
55
50 Hz /
114
50 Hz /
255
50 Hz /
281
50 Hz /
327 m3/h; 50 Hz /
64 m3/h; 60 Hz
134 m3/h; 60 Hz /
299 m3/h; 60 Hz /
312 m3/h; 60 Hz /
376 m3/h; 60 Hz /
23 m3/h; 60 Hz
(PF 2.000+PFA 2.000) (PF 2.500+PFA 3.000) (PF 3.000+PFA 3.000) (PF 5.000+PFA 6.000) (PF 6.000+PFA 6.000) (PF 7.000+PFA 6.000)
Capacity in combination
(filterfan + exhaust filter)
7 W/K / 8 W/K
18 W/K / 21 W/K
38 W/K / 45 W/K
85 W/K / 100 W/K
91 W/K / 100 W/K
106 W/K / 122 W/K
(PF 2.000+PFA 2.000) (PF 2.500+PFA 3.000) (PF 3.000+PFA 3.000) (PF 5.000+PFA 6.000) (PF 6.000+PFA 6.000) (PF 7.000+PFA 6.000)
Max. static pressure
(Airflow = 0 m3/h)
m3/h;
Installation
without tools
46 Pa
m3/h;
m3/h;
42 Pa
m3/h;
91 Pa
Filtration efficiency
91%
Filter material grade
(DIN EN 779)
G4
Noise level (DIN 45 635)
48 dB (A)
49 dB (A)
52 dB (A)
Duty cycle
Technical data
Outside dimensions in mm
(Height x Width x Installation depth)
m3/h;
156 Pa
172 Pa
122 Pa
68 dB (A)
70 dB (A)
71 dB (A)
100%
PF 2.000
PF 2.500
PF 3.000
PF 5.000
PF 6.000
PF 7.000
150 x 150 x 72
250 x 250 x 111
250 x 250 x 121
325 x 325 x 157
325 x 325 x 158
325 x 325 x 117
3,0 kg
3,5 kg
3,8 kg
Weight
0,736 kg
Electrical data
1,75 kg
PF 2.000
PF 2.500
PF 3.000
PF 5.000
PF 6.000
PF 7.000
Rated voltage 230 V
Voltage range
Power consumption
19 W
187 V … 253 V
19 W
45 W
74 W
190 V … 253 V
165 W
185 W
Rated voltage 115 V
Voltage range
Power consumption
20 W
97 V …127 V
18 W
40 W
103 V … 127 V
82 W
155 W
165 W
PF 2.000
PF 2.500
PF 3.000
PF 5.000
PF 6.000
PF 7.000
Supplementary data
Climatic data
Operating temperature
– 10 °C to + 55 °C
Storage temperature
– 20 °C to + 70 °C
Max. relative humidity
90%
System of protection
IP 55 when used as recommended
Approvals
UL approval see overview filterfans
108
97 V … 127 V
We reserve the right to technical alterations.Subject to correction. 075000053
Airflow data
Filter mat
UV
ELECTRO-TECHNOLOGY FOR INDUSTRY
Airflow data:
PF 2.000
46
PF 2.500
PF 5.000
255
319 [m3/h]
Static pressure increase
[Pa]
122
PFA 6.000
Airflow
281
379 [m3/h]
PFA 3.000
Airflow
87 [m3/h]
PF 6.000
172
PFA 5.000
55
PF 6.000
[Pa]
PF 5.000
Airflow
Airflow
28 [m3/h]
Static pressure increase
156
20
PFA 3.000
Static pressure increase
Airflow
PF 3.000
Static pressure increase
Static pressure increase
PFA 2.000
PF 3.000
91
42
PF 2.000
[Pa]
[Pa]
PF 2.500
[Pa]
114
134 [m3/h]
PF 7.000
PF 7.000
Static pressure increase
[Pa]
PFA 6.000
Airflow
327
415 [m3/h]
sealing
basic enclosure
Mechanical data:
design frame
fan frame
Installation cutout
We reserve the right to technical alterations.Subject to correction. 075000053
Outside dimensions in mm
A
Installation cutout
C
filter
mat
B
6*
mounting
wall
* 4 at PF 2.000
Dimensions
PF 2.000
PF 2.500
PF 3.000
PF 5.000
PF 6.000
PF 7.000
A
B
150
250
250
325
325
325
72
111
121
157
158
117
C
125 +– 01 thickness of material to 2 mm;
223 +– 01 thickness of material to 2 mm;
223 +– 01 thickness of material to 2 mm;
291 +– 01 thickness of material to 2 mm;
291 +– 01 thickness of material to 2 mm;
291 +– 01 thickness of material to 2 mm;
126 +– 10 thickness of material > 2 mm ≤ 3 mm
224 +– 10 thickness of material > 2 mm ≤ 3 mm
224 +– 10 thickness of material > 2 mm ≤ 3 mm
292 –+ 01 thickness of material > 2 mm ≤ 3 mm
292 –+ 01 thickness of material > 2 mm ≤ 3 mm
292 –+ 01 thickness of material > 2 mm ≤ 3 mm
109
Exhaust Filters - Model PFA IP55
sealing
design frame
basic enclosure
PFA2.000
145
150
Installation cutout:
125 mm x 125 mm
tolerance +– 10
thickness of material to 2 mm
126 mm x 126 mm
tolerance +– 10
thickness of material
> 2 mm ≤ 3 mm
filter mat
27
4
mounting
wall
outside dimensions 150 mm x 150 mm
sealing
basic enclosure
PFA2.500/3.000
design frame
245
224 mm x 224 mm
tolerance +– 10
thickness of material
> 2 mm ≤ 3 mm
filter
mat
sealing
basic
enclosure
PFA5.000/6.000 / 7.000
mounting
wall
6
30
outside dimensions 250 mm x 250 mm
design frame
318
325
Installation cutout:
291 mm x 291 mm
tolerance –+ 01
thickness of material to 2 mm
292 mm x 292 mm
tolerance +– 10
thickness of material
> 2 mm ≤ 3 mm
outside dimensions 325 mm x 325 mm
110
filter
mat
6
30
mounting
wall
We reserve the right to technical alterations.Subject to correction. 075000053
250
Installation cutout:
223 mm x 223 mm
tolerance –+ 01
thickness of material to 2 mm
ELECTRO-TECHNOLOGY FOR INDUSTRY
„ ... click and fit!“
same design as the filterfan PF-series
Pfannenberg developed and patented snap-fastening
„ ...click and fit“
for door mounting in accordance with VDE 0113 (EN 60204)
without screws
easy filter exchange during use
with integrated foamed on seal to enclosure
PFA 2.000
System of
protection
Click and fit!
PFA 2.500 / 3.000
Filtration efficiency
91%
Filter material grade
(DIN EN 779)
G4
Outside dimensions in mm
(Height x Width x Installation depth)
PFA 5.00 / 6.000 / 7.000
PFA 2.500 / 3.000
PFA 5.00 / 6.000 / 7.000
150 x 150 x 27
250 x 250 x 30
325 x 325 x 30
sprayed thermoplastic, self-extinguishing, UL 94 VO
0,126 kg
Colour
Supplementary data
Colour
PFA 2.000
Material
Weight
UV resistant
350 g/m2 and 150 g/m2
Filter mat
Technical data
Installation
without tools
RAL
0,460 kg
0,755 kg
RAL 7035, RAL 7032 or black, other colours available on request
PFA 2.000
PFA 2.500 / 3.000
PFA 5.00 / 6.000 / 7.000
We reserve the right to technical alterations.Subject to correction. 075000053
Airflow data
UV
IP 55
Climatic data
Operating temperature
– 20 °C to + 70 °C
Storage temperature
– 20 °C to + 70 °C
Max. relative humidity
90%
System of protection
Basic parts kit
Accessories
IP 55 when used as recommended
IP 55 filter mat, mounting- and user manual
radiant heater, fan heater, thermostat, see Thermal Management
111
PF-Series Slim Line
Filterfan PF 3000 SL
PF 3000 SL
Low profile filterfans depth
Built-in depth: 92,5 mm
IP 54
AC
DC
System of
protection
Click and fit!
Min. unit depth
Installation
without tools
RAL
Colour
[Pa]
Airflow data:
57
Airflow data
Static pressure increase
PF 3.000 SL
PF 3000 SL
140 m3/h
Unimpeded airflow (free-flow)
Capacity (free-flow)
47 W/K
Airflow in combination
(filterfan + exhaust filter
PFA 3000)
114 m3/h
Capacity in combination
(filterfan + exhaust filter
PFA 3000)
38 W/K
Noise level
55 dB (A)
Filter mat
150 g/m2
Airflow
Electrical data
TOP
115 V
207 V … 244 V
103 V … 122 V
50 / 60 Hz
46 / 44 Watt
48 / 46 Watt
0,25 A
0,45 A
Dimensions
Construction
Safety protection
Colour
System of protection
Weight
Approvals
112
PF 3000 SL
250 x 250 x 92,5 mm
(Height x Width x Installation depth)
sprayed thermoplastic (ABS-FR),
self-extinguishing, UL 94 VO
according to DIN 31001
RAL 7035, RAL 7032
Installation cutout
Installation cutout
223 mm x 223 mm
tolerance +– 10
thickness of material to 2 mm
IP 54 (EN 60529),
when used as recommended
1,85 / 1,75 kg (230 /115 V)
UL approval see overview filterfans
Installation cutout
224 mm x 224 mm
tolerance +– 10
thickness of material > 2 mm ≤ 3 mm
We reserve the right to technical alterations.Subject to correction. 075000053
100%
cage clamp
1) 24 V DC version on request
Supplementary data
61
140
Mains frequency
Type of connection
92.5
1.5
PF 3000 SL
Voltage range
Duty cycle
140 [m3/h]
250
230 V
Nominal current
114
Mechanical data:
Rated voltage1)
Power consumption
PFA 3.000
PF-Series Slim Line
Filterfan PF 6000 SL 2
ELECTRO-TECHNOLOGY FOR INDUSTRY
PF 6000 SL 2
Low profile filterfans depth
Built-in depth: 92,5 mm
IP 54
AC
DC
System of
protection
Click and fit!
Min. unit depth
Cutout
compatibility
Installation
without tools
[Pa]
Airflow data:
110
Airflow data
Static pressure increase
PF 6.000 SL2
PF 6000 SL 2
260 m3/h
86 W/K
Unimpeded airflow (free-flow)
Capacity (free-flow)
Airflow in combination
(filterfan + exhaust filter
PFA 6000)
205 m3/h
Capacity in combination
(filterfan + exhaust filter
PFA 6000)
68 W/K
Noise level
58 dB (A)
Filter mat
350 g/m2
Airflow
Electrical data
TOP
115 V
207 V … 244 V
103 V … 122 V
Mains frequency
61
50 / 60 Hz
92 / 88 Watt
96 / 92 Watt
0,5 A
0,9 A
100%
cage clamp
We reserve the right to technical alterations.Subject to correction. 075000053
Type of connection
92.5
1.5
PF 6000 SL 2
Voltage range
Duty cycle
260 [m3/h]
325
230 V
Nominal current
205
Mechanical data:
Rated voltage1)
Power consumption
PFA 6.000
1) 24 V DC version on request
Supplementary data
Dimensions
Construction
Safety protection
Colour
System of protection
Weight
* Tolerance installation cutout
Approvals
PF 6000 SL 2
325 x 325 x 92,5 mm
(Height x Width x Installation depth)
sprayed thermoplastic (ABS-FR),
self-extinguishing, UL 94 VO
according to DIN 31001
Installation cutout
Installation cutout
291 mm x 291 mm *
RAL 7035, RAL 7032
IP 54 (EN 60529),
when used as recommended
3,55 / 3,45 kg (230 /115 V)
291 +– 01
UL approval see overview filterfans
113
PF-Series Slim Line
Filterfan PF 6500 SL 1
PF 6500 SL 1
Low profile filterfans depth
Built-in depth: 125 mm
IP 54
AC
DC
System of
protection
Click and fit!
Min. unit depth
Cutout
compatibility
RAL
Installation
without tools
Colour
[Pa]
Airflow data:
145
Airflow data
Static pressure increase
PF 6.500 SL1
PF 6500 SL 1
545 m3/h
165 W/K
Unimpeded airflow (free-flow)
Capacity (free-flow)
Airflow in combination
(filterfan + exhaust filter
PFA 6000)
390 m3/h
Capacity in combination
(filterfan + exhaust filter
PFA 6000)
126 W/K
Noise level
59 dB (A)
Filter mat
150 g/m2
Airflow
TOP
207 V … 244 V
103 V … 122 V
Mains frequency
50 / 60 Hz
Power consumption
Construction
Safety protection
Colour
System of protection
Weight
* Tolerance installation cutout
Approvals
114
64 / 80 Watt
0,29 A
0,58 A
100%
terminal strip
PF 6500 SL 1
325 x 325 x 117 mm
(Height x Width x Installation depth)
sprayed thermoplastic (ABS-FR),
self-extinguishing, UL 94 VO
according to DIN 31001
RAL 7035, RAL 7032
IP 54 (EN 60529),
when used as recommended
3,75 kg (230 /115 V)
291 +– 01
UL approval see overview filterfans
Installation cutout
Installation cutout
291 mm x 291 mm*
We reserve the right to technical alterations.Subject to correction. 075000053
Dimensions
90
260
115 V
Voltage range
Supplementary data
117
1,5
PF 6500 SL 1
230 V
Type of connection
545 [m3/h]
325
Rated voltage
Duty cycle
390
Mechanical data:
Electrical data
Nominal current
PFA 6.000
Filterfans - Model FLF
ELECTRO-TECHNOLOGY FOR INDUSTRY
129
Rated voltages
available
Height x
Width
(mm)
Installation
cutout
(mm)
37 m3/h
(with AFF 01)
230 V AC, 115 V AC
24 V, 12 V DC
129 x 129
Ø 116
63 m3/h
38 m3/h
(with AFF 02)
230 V AC, 115 V AC
48 V, 24 V, 12 V DC
129 x 129
Ø 116
FLF 0-E
58 m3/h
44 m3/h
integrated
230 V AC, 115 V AC
48 V, 24 V, 12 V DC
238 x 238
200 x 200
FLF 0
73 m3/h
63 m3/h
(with AFF 0)
230 V AC, 115 V AC
48 V, 24 V, 12 V DC
238 x 238
200 x 200
FLF I
71 m3/h
65 m3/h
(with AFF I)
230 V AC, 115 V AC
338 x 238
300 x 200
FLF II
184 m3/h
151 m3/h
(with AFF I)
230 V AC, 115 V AC
338 x 238
300 x 200
FLF III
756 m3/h
591 m3/h
(with AFF III)
230 V AC, 115 V AC
3 x 400 V AC
338 x 338
300 x 300
freeflow
with
exhaust filter
FLF 01
59 m3/h
FLF 02
26
56
13
Air volume
Filterfan/
Model
connection
cover
protection
against contact
124
screw M4
129
filter mat
mounting wall
9,5
39,5
13
connection
cover
124
filter mat
mounting wall
protection
against contact
screw M4
238
cover
18
filter mat
196
124
Lufteintritt
Ø 4,3
protection
against contact
233
69
28
238
cover
18
filter mat
196
124
air
intake
Ø 4,3
protection
against contact
233
69
28
238
18
cover
293
Ø 118
333
338
45
Ø 4,3
196
233
75
28
238
18
filter mat
cover
293
Ø 150
Ø 4,3
196
233
112
28
338
16
filter mat
300
258
cover
Ø 4,3
137
333
filter
mat
28
protection against contact
Exchaust Filters Model AFF
General technical information
Filtration efficiency of standard filter: 88%
Filter material grade: G3 (FLF 02 G2)
according to DIN EN 779
Safety protection according to EN 60529
Duty cycle 100%
Mains frequency: suitable for both:
50 Hz and 60 Hz
Model
Dimensions
AFF 02
AFF 01
AFF 0
AFF I
AFF III
129 mm x 129 mm x 12 mm
129 mm x 129 mm x 26 mm
238 mm x 238 mm x 28 mm
338 mm x 238 mm x 28 mm
338 mm x 338 mm x 28 mm
Operating temperature: -10 °C to + 50 °C
Storage temperature: - 20 °C to + 70 °C
Colour: similar RAL 7032 (european grey),
other colours on request
Material: ABS-FR, FLF 0-E (PC-FR)
System of protection: IP 54 with a rubber seal
at horizontal airflow
Installationcutout (mm)
Ø 116
Ø 116
200 x 200
300 x 200
300 x 300
Accessories: rubber seal, fan heater, radiant
heater, thermostat: see Thermal Management.
The screws required for mounting the unit, as
well as mounting and operating instructions
are included with every filterfan/exhaust filter.
115
We reserve the right to technical alterations.Subject to correction. 075000053
333
338
75
Top Fan PTF 60.500 / PTF 60.700 / PTF 61.000
Top Exhaust Filter PTFA 60.000
NEW!
PTF 60.500 / PTF 60.700 / PTF 61.000 / PTFA 60.000
ideal to use when there is little space within the enclosure
compartment
available in IP 33 and IP 54
all types in only one cut-out make uprades easy
simple click&fit installation, no tool necessary
best way to ventilate (AC) the enclosure, bottom-up ventilation
of entire enclosure
System of
protection
Airflow data
Filter mat
Airflow free-flow
Capacity free-flow
Airflow in combination
(filterfan + exhaust filter)
Capacity in combination
(filterfan + exhaust filter)
Max. static pressure
(Airflow = 0 m3/h)
Filtration efficiency
Filter material grade (DIN EN 779)
Noise level (DIN 45 635)
Duty cycle
Technical data
Outside dimensions in mm
(Height x Width x Depth x Installation depth)
Construction material
Weight
Safety protection
Colour
Type of connection
Electrical data
System of
protection
PTF 60.500
Click and fit!
Cutout
compatibility
PTF 60.700
IP 33
IP 54
IP 54-filter mat
500 m3/h
350 m3/h
161 W/K
113 W/K
260 m3/h
230 m3/h
(PTF 60.500 + PFA 6.000)
84 W/K
74 W/K
(PTF 60.500 + PFA 6.000)
IP 54
IP 54-filter mat
700 m3/h
550 m3/h
226 W/K
177 W/K
400 m3/h
350 m3/h
(PTF 60.700 + PFA 6.000)
129 W/K
113 W/K
(PTF 60.700 + PFA 6.000)
IP 33
IP 54
IP 54-filter mat
1000 m3/h
750 m3/h
323 W/K
242 W/K
550 m3/h
470 m3/h
(PTF 61.000 + PFA 6.000)
177 W/K
152 W/K
(PTF 61.000 + PFA 6.000)
88 Pa
81%
G3
-
Colour
Installation
without tools
PTF 61.000
IP 33
71 Pa
-
RAL
IP 54
158 Pa
81%
G3
-
81%
G3
67 dB (A)
69 dB (A)
100%
77 dB (A)
PTF 60.500
PTF 60.700
PTF 61.000
125 x 430 x 430 x 50
140 x 470 x 470 x 50
140 x 470 x 470 x 50
metal chassis, cover powder-coated; snap-in body of sprayed thermoplastic (ABS-FR) self-extinguishing, UL 94 VO
5,5 kg
5,8 kg
6,0 kg
according to EN 60529
RAL 7035, RAL 7032, other colours available on request
terminal strip
Power consumption 230 V
115 V
PTF 60.500
230 V 50/60 Hz +/- 10%
115 V 50/60 Hz +/- 10%
4 x 28 / 24 W
4 x 29 / 24 W
PTF 60.700
230 V 50/60 Hz +/- 10%
115 V 50/60 Hz +/- 10%
65 / 80 W
75 / 90 W
PTF 61.000
230 V 50/60 Hz +/- 10%
115 V 50/60 Hz +/- 10%
115 / 150 W
110 / 170 W
Supplementary data
PTF 60.500
PTF 60.700
– 10 °C to + 55 °C
– 20 °C to + 70 °C
90%
IP 33, IP 54 (EN 60 529), when used as recommended
radiant heater, fan heater, thermostat, see Thermal Management
291 +– 01 thickness of material to 2mm
292 +– 10 thickness of material > 2mm ≤ 3mm
UL approval see overview filterfans
PTF 61.000
Rated voltage
Operating temperature
Storage temperature
Max. relative humidity
System of protection
Accessories
Tolerance installation cutout
Approvals
116
We reserve the right to technical alterations.Subject to correction. 075000053
IP 33
ELECTRO-TECHNOLOGY FOR INDUSTRY
Airflow data:
PTF 60.500 - IP 33
PTF 60.500
260
PTF 60.700
PFA 6.000
Airflow
500 [m3/h]
PTF 60.500 - IP 54
Static pressure increase
Static pressure increase
Static pressure increase
PFA 6.000
400
700 [m3/h]
PTF 60.700 - IP 54
[Pa]
71
[Pa]
PFA 6.000
PTF 60.500
Airflow
230
PTF 61.000 - IP 33
PFA 6.000
PTF 61.000
Airflow
550
1000 [m3/h]
PTF 61.000 - IP 54
158
88
Static pressure increase
Static pressure increase
[Pa]
158
88
Airflow
[Pa]
PTF 60.700 - IP 33
[Pa]
71
PFA 6.000
PTF 60.700
Airflow
350 [m3/h]
350
550 [m3/h]
Mechanical data:
Static pressure increase
[Pa]
PFA 6.000
PTF 61.000
Airflow
470
750 [m3/h]
Installation cutout
B1
B2
A1
C1
PTF 60.700
PTF 61.000
PTFA 60.000
140
470
90
140
470
90
110*
430
75
Airflow data
Filter mat
Filtration efficiency
Filter material grade (DIN EN 779)
292 mm x 292 mm
tolerance +– 01
thickness of material > 2 mm ≤ 3 mm
PTFA 60.000 IP 54
IP 54-filter mat
81%
G3
Technical data
Outside dimensions in mm
(Height x Width x Depth x Installation depth)
Construction
Weight
Safety protection
Colour
PTFA 60.000
110 x 430 x 430 x 35
metal chassis, cover powder-coated; snap-in body of sprayed thermoplastic (ABS-FR) self-extinguishing, UL 94 VO
3,1 kg
according to EN 60529
RAL 7035, RAL 7032, other colours available on request
Supplementary data
Operating temperature
Storage temperature
Max. relative humidity
System of protection
Accessories
Tolerance installation cutout
Approvals
We reserve the right to technical alterations.Subject to correction. 075000053
PTF 60.500
A1
125
B1/B2
430
C1
75
* no terminal strip
Installation cutout:
291 mm x 291 mm
tolerance –+ 01
thickness of material to 2 mm
291 –+ 01
PTFA 60.000
– 10 °C to + 55 °C
– 20 °C to + 70 °C
90%
IP 33, IP 54 (EN 60 529), when used as recommended
radiant heater, fan heater, thermostat, see Thermal Management
thickness of material to 2mm; 292 –+ 01 thickness of material > 2mm ≤ 3mm
UL approval see overview filterfans
117
Customised solutions for air-conditioned
telecommunication equipment
For more than 15 years, Pfannenberg have cooperated
with the most successful system providers and
enclosure manufacturers in the international
telecommunications market.
Our customers and partners rely on us - starting from
the analysis to development, system integration and
to production and logistics at various production
facilities.
The Pfannenberg product range includes a large
variety of air-/air-heat exchangers, cooling units or
combi units for indoor- and outdoor-applications with
surrounding temperatures from – 40 °C to + 55 °C.
We reserve the right to technical alterations.Subject to correction. 075000053
118
Thermal Management
ELECTRO-TECHNOLOGY FOR INDUSTRY
The devices of the Thermal Management for Pfannenberg’s air-conditioning equipment are useful
supplementary items and provide additional control for Pfannenberg filterfans, heat exchangers
and cooling units.
NEW!
Thermostat
NEW!
Hygrostat / Hygrostat-Thermostat Combination
Temperature control devices are mainly used to regulate filterfans or enclosure heaters. They
are available with NCC, NOC and change-over function. Especially when used in combination
with heating systems, they are not only suitable for temperature control in, for example, outdoor applications, but can also “artificially” dehumidify enclosures. This means that the
temperature is maintained at a level over and above the dewpoint, preventing precipitation
of water from the air and potential short-circuiting that can result from accumulated condensation. A new combined thermostat range combines two thermostats in all combinations
for complex trigger operations!
page 120/121
The hygrostat regulates heaters or fans whenever they exceed a preset level of relative
humidity. This means that the relative humidity is maintained over and above the dewpoint
to prevent precipitation of water on the electrical components and corrosion on unprotected
metal.
A new electronic device combines a thermostat and a hygrostat in one.
page 122/123
Radiant heating systems
Radiant heaters are very compact devices, designed to cover a wide range of operating
voltages. They are primarily used in conjunction with a thermostat or hygrostat to prevent
low temperatures or high levels of humidity in enclosures, thus forestalling the production
of corrosion.
Pfannenberg’s new mini-heaters are particularly suitable for use in small enclosures or for
selective heating of sensitive areas.
page 124-126
Fan Heaters
These heaters are the optimum solution for large-sized enclosures. They have an integrated
fan to enhance natural convection and provide rapid, uniform distribution of heat inside
the enclosure.
Fan heaters are primarily used in conjunction with a thermostat or hygrostat to prevent low
temperatures or high levels of humidity in enclosures, thus forestalling the production of
corrosion.
page 124/125
119
We reserve the right to technical alterations.Subject to correction. 075000053
NEW!
Thermostat
FLZ 510, FLZ 520, FLZ 530 und FLZ 550 AS-i
Mechanical bi-metallic thermostat for temperature in enclosures. Suitable for
Pfannenberg filterfans and heaters and also for monitoring temperature.
Different models available fitted with either change-over contact with neutral
position, NCC or NOC.
Function at increasing temperature (e.g. NCC for triggering heaters, NOC for
triggering fans). AS-i slave module also available.
• all models can be delivered in convenient packaging units
AC
IP 20
System of
protection
Technical data
FLZ 510
suitable for both
50 Hz and 60 Hz
DC
Load
Load
FLZ 520
FLZ 530
FLZ 550 AS-i
Type of contact
change over with spring contact
NCC with spring contact
NOC with spring contact
- 20 °C (- 4 °F) ... + 40 °C (+ 104 °F)
Available setting ranges
0 °C (+ 32 °F) ... + 60 °C (+ 140 °F)
+ 20 °C (+ 68 °F) ... + 80 °C (+ 176 °F)
NCC: 100-250V AC/10(2)A
240V AC / 10(2) A
Max. breaking capacity, value in brackets:
NOC:
100-250V
AC/5(2)A
120V AC / 15(2) A
inductive Load at cos(phi) = 0,6
DC: max. 30W
DC: max. 30W
1K: thermal return *
Breaking temperature difference
3K: without thermal return
< 7K
7K: capillary sensor
Tolerance for switching point
+/- 3K
+/- 4K
Sensor
bimetal or capillary sensor (1,5 m)
bimetal
Connection
Programming
0,5 - 2,5
< 20 mA
26,5 V ... 31,6 V
AS-i profile: S-BA
1 - 4K
(adjustable)
+/- 2K
NTC
clamps
RAL 7035 - light grey
75 g
Approvals
* suitable for 230V connection
FLZ 510
50 g
50 g
FLZ 510
capillary sensor
FLZ 510 1K
FLZ 520 / FLZ 530 / FLZ 550-AS-i
1
1
2
2
3
FLZ 530
NOC
FLZ 520
NCC
FLZ 510 3K / 7K
4
55 g
IP 20
- 20 °C (- 4 °F) ... + 80 °C (+ 176 °F)
- 25°C (- 13°F) ... + 80°C (+ 176°F)
snap fastening for 35mm profile bars according to EN 60715 (FLZ 520/530: for Pfannenberg exhaust filter PFA 3000 too)
FLZ 550 AS-i not for headfirst mounting
1K, 3K: UL approval (not for 7K)
UL approval
AS-i
FLZ 550 AS-i
3
1
RF
L N
L
N
1
2
LOAD
e.g. heater
L
N
LOAD
e.g. fan
2
We reserve the right to technical alterations.Subject to correction. 075000053
System of protection
Working /storage temperature range
Mounting method
120
- 10°C (+ 14°F) ... + 60°C(+ 140°F)
1,3 mm DC Jack programming
Colour
Weight
L N
mm2 screw
integrated AS-i bus Slave
Twin Thermostat
FLZ 541, FLZ 542, FLZ 543
ELECTRO-TECHNOLOGY FOR INDUSTRY
NEW!
The twin thermostats of the FLZ series stand out for their integration of independently triggering mechanical thermostats. In contrast to thermostats with
changeover contact, connected devices can be operated in varying temperature ranges. The availability of differing combinations ensures that a great
number of applications can be catered for ideally.
• FLZ 541 (NCC/NOC) for triggering, heaters and fans for example
• FLZ 542 (NCC/NCC) for triggering heaters, for example, heaters and
additional heaters or early warning system and heater
• FLZ 543 (NOC/NOC) for triggering fans, for example: filterfans and additional
filterfans to reduce volume/energy or early warning systems and filterfans
• all models can be delivered in convenient packaging units
AC
IP 20
System of
protection
Technical data
Type of contact
Temperature ranges (adjustable)
Max. breaking capacity, value in brackets:
inductive Load at cos(phi) = 0,6
Breaking temperature difference
Tolerance for switching point
Sensor
Connection
Colour
System of protection
Working /storage temperature range
Mounting method
Weight
Approvals
FLZ 541
suitable for both
50 Hz and 60 Hz
Load
FLZ 542
DC
Load
FLZ 543
NCC / NOC with spring contact
NCC / NCC with spring contact
NOC / NOC with spring contact
0 °C (30 °F) ... + 60 °C (+ 140 °F)
240 V AC, 10 (2)A / 120 V AC, 15(2) A
DC: max. 30W
< 7K
± 4K
bimetal
0,5 - 2,5 mm2 screw clamps
RAL 7035 - light grey
IP20
- 20 °C (- 4 °F) ... + 80 °C (+ 180 °F)
snap fastening for 35mm profile bars according to EN 60715, for Pfannenberg exhaust filter PFA 3000 too
95 g
UL- and cUL approval in preparation
We reserve the right to technical alterations.Subject to correction. 075000053
80,5
FLZ 541
FLZ 542
59
38
6,8
FLZ 543
121
Electronic combined unit
Hygrostat/Thermostat FLZ 610
NEW!
The electronic combined unit monitors the relative moisture and the temperature
simultaneously, but independently of one another. If the set relative humidity
level is exceeded, or if the temperature is lower than set, the connected unit, for
example, a heater is triggered. This is ideal for avoiding condensation forming
on electronic components in the electrical enclosure.
It is instantly clear whether the hygrostat and/or the thermostat have triggered
the attached units (LOAD 1) by means of the integrated LEDs. If no LED is lit,
LOAD 2 is active.
• also available in a convenient packaging unit
AC
IP 20
System of
protection
Technical data
suitable for both
50 Hz and 60 Hz
Load
DC
Load
FLZ 610
Type of contact
Control range (adustable)
change-over switch (relay)
40 - 90% r. H.
Temperature range ( adustable)
0 °C (30 °F) ... + 60 °C (+ 140 °F)
Rated voltage
Max. breaking capacity, value in brackets:
inductive Load at cos(phi) = 0,6
Differential gap
230 V or 115 V AC 50/60 Hz
240 V AC, 8(3) A or 120 V AC, 8(3) A
24 V DC, 4 A
±
approx. 2K 1K / approx. 4% r.H. ± 1%
< 10m Ω
Contact transition resistance
0,5- 2,5 mm2 screw clamps
Connection
Colour
RAL 7035 - light grey
Operating mode display
System of protection
Working temperature range
LED
IP 20
- 20 °C (- 4 °F) ... + 60 °C (+ 140 °F)
Storage temperature range
Number of switching cycles
Mounting method
- 20 °C (- 4 °F) ... + 80 °C (+ 176 °F)
≥ 100.000
snap fastening for 35mm profile bars according to EN 60715, for Pfannenberg exhaust filter PFA 3000 too)
59
122
38
6,8
We reserve the right to technical alterations.Subject to correction. 075000053
85 g
UL- and cUL approval in preparation
80,5
Weight
Approvals
Mechanichal Hygrostat
FLZ 600
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical hygrostat with change-over contact for triggering heating and / or
filterfan at a preset level of relative humidity.
This maintains the relative humidity above the dew point to prevent condensation
and corrosion.
• also available in a convenient packaging unit
IP 20
System of
protection
Technical data
AC
Load
DC
Load
FLZ 600
Type of contact
Control range
Change-over switch
40 - 90% r.H.
NCC: 24V - 250V AC / 5(0,2) A - min. 100 mA
NOC: 24V - 250V AC / 2(0,2) A min. 100 mA
DC: max. 30W
Max. breaking capacity, value in brackets:
inductive Load at cos(phi) = 0,6
Differential gap
approx. 5%
Tolerance for switching point
Sensor
+/- 4% based on 50% r.H.
polyamide band
Connection
0,5 - 2,5 mm2 screw clamps
Colour
RAL 7035 - light grey
Weight
55 g
System of protection
Operating temperature
IP 20
0 °C (30 °F) ... + 60 °C (+ 140 °F)
Storage temperature
- 20 °C (- 4 °F) ... + 80 °C (+ 176 °F)
snap fastening for 35mm profile bars according to EN 60715
UL approval
37
46
We reserve the right to technical alterations.Subject to correction. 075000053
Mounting method
Approvals
64
123
Radiant Heater and Fan Heater
FLH 010 - FLH 400
Heat generated by electrical equipment operating under load will prevent the
accumulation of condensation. After the equipment has been switched off
however it cools down and gradually adapts to the ambient temperature, thus
dropping below the dew point.
This is the signal that triggers the heater! These sources of heat prevent the
formation of condensation by raising the internal temperature a few degrees
above the ambient temperature.
In the interest of evenly distributing the heat, we recommend that the requirement of heating capacity is divided among several small heaters.
230 V
IP 44
115 V
System of
protection
Thermal data
Heater power (Tu = + 20 °C)
Max. surface temperature approx.
suitable for both
50 Hz and 60 Hz
115 V … 230 V
(FLH 010-150)
Radiant Heater
Fan Heater
FLH 010
FLH 015
FLH 030
FLH 045
FLH 060
FLH 075
FLH100
FLH 150
FLH 250
FLH 400
10 Watt
15 Watt
30 Watt
45 Watt
60 Watt
75 Watt
100 Watt
150 Watt
250 Watt
400 Watt
55 °C
65 °C
90 °C
105 °C
105 °C
120 °C
130 °C
150 °C
70 °C
85 °C
Airflow
50 m3/h (50 Hz) 61 m3/h (60 Hz)
Duty cycle
Heating element
100 %
PTC (positive temperature coefficient), temperature regulating
resistance type with temperature monitor
Electrical data
Rated voltage1)
Voltage range
Power consumption
10 Watt
Starting current approx.
1,0A
1)
other voltages (24V DC, 48V DC) on request
2)
selected models available in 400V
230 V (50 / 60 Hz) 2)
115 V or 230 V
110 - 250 V
104 - 126 V or 207 - 258 V
15 Watt
30 Watt
45 Watt
60 Watt
75 Watt
100 Watt
150 Watt
260 Watt
410 Watt
1,1A
1,2A
1,8A
2,5A
4,5A
5,0A
7,5A
2,2A / 1,1A
3,6A / 1,8A
Mechanical data
Fitting position
any, vertical position preferred
Weight
Dimensions
Protection class
Connection
Binding post clambing area
Mounting method
airflow vertical, exit at top
aluminium section, anodised (light-coloured)
250 g
A
250 g
A
250 g
A
250 g
A
450 g
B
510 g
B
510 g
B
770 g
C
1.035 g
D
I
cable end or plug-in terminal
1.200 g
E
I
plug-in terminal
single filament: 2 x 0,5 - 2,5 mm2 , fine multi-filament: (soldered, wire and sleeve, pin terminal) 2 x 0,5 - 1,5 mm2
snap fastening for 35mm profile bars according to EN 60715
Supplementary data
Operating temperature
- 40 °C (- 40 °F) ... + 70 °C (+ 158 °F)
- 20 °C (- 4 °F) ... + 70 °C (+ 158 °F)
Storage temperature
- 40 °C (- 40 °F) ... + 70 °C (+ 158 °F)
- 40 °C (- 40 °F) ... + 70 °C (+ 158 °F)
System of protection
Accessories
Approvals
Optional extra
IP 44 (cable end), IP 20 (plug-in terminal), when installed as recommended
thermostats, hygrostats
UL approval
IP 20, when installed as recommended
124
2nd protective guard
We reserve the right to technical alterations.Subject to correction. 075000053
Construction
ELECTRO-TECHNOLOGY FOR INDUSTRY
Mechanical data:
FLH 010 - FLH 150
plug-in terminal
cable end
104
85
with guard
65
104
85
without guard
125
We reserve the right to technical alterations.Subject to correction. 075000053
D=183,5 / E=223,5
90
65
90
D=186,5 / E=226,5
FLH 250 / FLH 400
Mini Radiant Heaters
FLH 010-M, FLH 020-M and FLH 030-M
Mini Radiant Heaters
The new mini radiant heaters are particularly suitable for use in small enclosures
or for selective heating of sensitive areas.
Heat generated by electrical equipment operating under load will prevent the
accumulation of condensation. After the equipment has been switched off
however it cools down and gradually adapts to the ambient temperature, thus
dropping below the dew point.
This is the signal that triggers the radiant heater! These sources of heat prevent
the formation of condensation by raising the internal temperature a few degrees
above the ambient temperature.
NEW!
230 V
IP 54
115 V
System of
protection
Thermal data
Heater power (Tu = + 20 °C)
suitable for both
50 Hz and 60 Hz
115 V … 230 V
FLH 010-M
FLH 020-M
FLH 030-M
10 Watt
20 Watt
30 Watt
95 °C
115 °C
140 °C
Max. surface temperature approx.
Duty cycle
Heating element
100 %
PTC (positive temperature coefficient), temperature regulating
Electrical data
Rated voltage
230 V (50 / 60 Hz)
Voltage range
Power consumption
110 - 250 V
10 Watt
20 Watt
30 Watt
1,0A
1,1A
1,2A
Starting current approx.
Mechanical data
Fitting position
any, vertical position preferred
Construction
aluminium section, anodised (black)
85 g
A = 50 mm
120 g
A = 75 mm
120 g
A = 75 mm
Protection class
Connection
II
cable end (300 mm)
Mounting method
snap fastening for 35mm profile bars according to EN 60715
Supplementary data
Operating temperature
- 40 °C (- 40 °F) ... + 70 °C (+ 158 °F)
Storage temperature
- 40 °C (- 40 °F) ... + 70 °C (+ 158 °F)
System of protection
IP 54 (vertical installation), when used as recommended
Accessories
Approvals
Mechanical data:
thermostats, hygrostats
UL approval
L approx. 300 mm
45
12
A
126
29,5
We reserve the right to technical alterations.Subject to correction. 075000053
Weight
Dimensions
Lamp Systems, Plugs, Power Sockets,
Pressure Compensation Device and
Machine Identification Lights
ELECTRO-TECHNOLOGY FOR INDUSTRY
Apart from the air conditioning of industrial applications with its comprehensively expanded product range Pfannenberg
now also offers systems and components for switch cabinet suppliers.
Pfannenberg Lamp System PLS
For illuminating your switch cabinets there is a large selection of different options available.
Whether with plugs, connections for door contacts, integrated door end switches or for
simple series connection of several lights – everything is possible. Light coverings are also
available.
page 128
Mains / Connection Plug PLS-C
In order to simply and effectively integrate the Pfannenberg lamp system into the switch
cabinet we offer you a range of prefabricated connection possibilities of different lengths.
page 130
Power Sockets PPS
For simple snap fastening on 35mm profile bars available in the countries’ designs of
Germany, France and USA (incl. UL approval). The electrical connection is made using
screw clamps up to a line section of 4mm2 (single wire).
page 130
Due to temperature fluctuations in a housing in relation to the environment, created by
installed heat creating fluctuations of the ambient temperature, changing pressures arise.
These pressure changes can lead to a build up of dust and humidity in the enclosure. To compensate for these pressure fluctuations it is recommended to install a pressure-balancing
device keeping the highest protection types (up to IP 69K, high pressure/steam jet cleaning).
page 130
Maschine Identification Lights BR
To supplement their air-conditioning equipment, Pfannenberg also manufacture machine
identification lights for control equipment and automation systems. The slimline, elegant
shape and the intrinsic values of BRsignal towers ensure that they are placed more and more
frequently on machines in the electrical industry, in medicine technology and in laboratories.
page 131
127
We reserve the right to technical alterations.Subject to correction. 075000053
Pressure Compensation Device PPC
Standard Lamp System Series PLS
Technical data
Rated voltage
Current consumption
Fluorescent tube
Tube type
Light intensity
Duty cycle
Operating temperature
Storage temperature
System of protection
Protection class
Colour of housing
Fitting position
Basic parts kit
Certification
Weight
Connection
Dimensions
42
345
PLS 008 MINI
230 V 50/60 Hz
0,07 A
8W
T5
450 Lm
8000 h
– 10 °C (+ 14 °F) ... + 45 °C (+ 113 °F)
– 10 °C (+ 14 °F) ... + 45 °C (+ 113 °F)
IP 20
II
white
any
magnetic fixing enclosed
GS (ITS)
0,17 kg
mains connector with plug enclosed
PLS 008 SL
Technical data
Dimensions
Rated voltage
Current consumption
Fluorescent tube
Tube type
Light intensity
Duty cycle
Operating temperature
Storage temperature
System of protection
Protection class
Colour of housing
Fitting position
Certification
Weight
Connection
230 V 50 Hz
0,16 A
8W
T5
450 Lm
8000 h
– 10 °C (+ 14 °F) ... + 45 °C (+ 113 °F)
– 10 °C (+ 14 °F) ... + 45 °C (+ 113 °F)
IP 20
I
RAL 7035
any
ENEC (KEMA)
0,89 kg
cable (1,5 m)
Technical data
Rated voltage
Current consumption
Fluorescent tube
Tube type
Light intensity
Power socket
Duty cycle
Operating temperature
Storage temperature
PLS 014
230 V 50 Hz
0,39 A
14 W
T8
700 Lm
D (other versions on request)
8000 h
– 10 °C (+ 14 °F) ... + 45 °C (+ 113 °F)
– 10 °C (+ 14 °F) ... + 45 °C (+ 113 °F)
System of protection
Protection class
Colour of housing
Fitting position
Certification
Weight
Connection
Additional connections
IP 20
I
RAL 7035
any
ENEC (KEMA)
1,22 kg
GST 18/3 plug
GST 18/3 socket
250
connection cable 1,5 m
H05VV-F 3x1,5qmm
black with cable end sleeve
PLS 014
Dimensions
225
60
92
PLS 014 cable
38
340
398
225
340
female connector
GST 18/3
225
female
connector
GST 18/3
128
398
male connector
GST 18/3
door end switch
male connector
GST 18/3
208
340
398
1,31 kg
cable (1,5 m)
door contact
60
92
PLS 014
2 x GST 18/3 with
door end switch
door contact
female connector ST 17/2
60
92
PLS 014
2 x GST 18/3 with
external door contact
connection cable 1,5 m
H05VV-F 3x1,5qmm
black with cable end sleeve
PLS 008 SL
67
1,22 kg
GST 18/3 plug
GST 18/3 socket
integrated
door end switch
We reserve the right to technical alterations.Subject to correction. 075000053
PLS 008 MINI
Lamp System Series PLS:
Special versions
Technical data
ELECTRO-TECHNOLOGY FOR INDUSTRY
PLS 015
PLS 015 SL
Rated voltage
PLS 008 SL
PLS 013 MINI
230 V 50 Hz (US: 120 V 60 Hz)
Current consumption
0,29 A (US: 0,38 A)
Fluorescent tube
0,16 A (US: 0,25 A)
0,11 A
15 W
8W
13 W
T5
450 Lm
T5
640 Lm
15 W
Tube type
Light intensity
Power sockets
Duty cycle
230 V 50/60 Hz
0,29 A (US: 0,38 A)
T8
720 Lm
D, F, CH, GB, US/CDN
8000 h
Operating temperature
Storage temperature
– 10 °C (+ 14 °F) ... + 45 °C (+ 113 °F)
– 10 °C (+ 14 °F) ... + 45 °C (+ 113 °F)
System of protection
Protection class
I
II
RAL 7035
white
IP 20
Colour of housing
Fitting position
any
Certification
Weight (kg)
1,36
1,25
Connection
Cable (1,5 m)
X
GST 18/3 plug
X
Additional connections
GST 18/3 socket *
X
X
Door contact
Integrated door end switch
Measure drawing
1
* for series connection of several lights
1.29
1,29
X
X
X
X
X
1,43
X
2
ENEC (KEMA)
1,28 1.30 1,32
4
0,75
X
X
X
3
1,35
0,75
0,78
0,82
X
X
X
X
X
X
X
GS (ITS)
0,26
mains connector plug
enclosed
X
X
X
X
X
X
X
X
X
X
7
8
5
6
9
X
10
11
Accessories cable see page 130
Light cover
PU (piece)
1
1
1
PLS 015 SL
PLS 008 SL
4
1
connection cable 1,5 m
H05-VV-F 3x1,5qmm
black with
cable end sleeve
8
PLS 013 MINI
connection cable 1,5 m
H05-VV-F 3x1,5qmm
black with
cable end sleeve
250
female connector GST18/3
PLS 015
cable /
GST18/3
connection cable 1,5 m
H05-VV-F 3x1,5qmm
black with cable end sleeve
2
5
male
connector
GST18/3
connection cable 0,5 m
H03-VV-F 2x0,75qmm
grey with female connector ST17/2
with cord relief
9
connection cable 0,5 m
H03-VV-F 2x0,75qmm
grey with female
connector ST17/2
PLS 015
2 x GST18/3
male
connector
GST18/3
PLS 015
2 x GST18/3
with door end switch
female
connector
GST18/3
PLS 015 SL
2 x GST18/3
PLS 008 SL
2 x GST18/3
ext. door contact
male
connector
GST18/3
female connector GST18/3
10
7
optional extra
door end switch
male
connector
GST18/3
female connector GST18/3
6
male
connector
GST18/3
female
connector
GST18/3
connection cable 0,5 m
H03-VV-F 2x0,75qmm
grey with male connector
ST17/2
250
PLS 015 SL
2 x GST18/3
ext. door contact
3
22
connection cable 1,5 m
H05-VV-F 3x1,5qmm
black with
cable end sleeve
PLS 015 SL
cable GST18/3
PLS 015
2 x GST18/3
ext. door contact
570
PLS 008 SL
cable GST18/3
PLS 015 SL
cable
female connector
GST18/3
female
connector
GST18/3
11
42
PLS 015
optional extra
door end switch
PLS 015 SL
2 x GST18/3
with door end switch
female
connector
GST18/3
PLS 008 SL
2 x GST18/3
250
optional
extra
door end
switch
male
connector
GST18/3
PLS 008 SL
2 x GST18/3
with door end switch
129
We reserve the right to technical alterations.Subject to correction. 075000053
PLS light cover for PLS 008 SL
PLS light cover for PLS 014
PLS light cover for PLS 015 and PLS 015 SL
Plugs, Connecting Cable, Power Socket
and Pressure Compensation Device
Plugs / connecting cables PLS-C (for PLS 008 SL / PLS 014 / PLS 015 / PLS 015 SL)
1
2
3
PLS-C mains connection cable with saftey plug and GST 18/3 socket
PLS-C mains connection cable with GST 18/3 plug
PLS-C mains connection cable with GST 18/3 socket
PLS-C connecting cable withGST 18/3 plug und socket
Socket GST 18/3
Plug GST 18/3
Door contact cable ST 17/2
4
5
length
1,0 or 3,0 m
1,0 or 3,0 m
1,0 or 3,0 m
0,5 or 1,0 or 2,0 m
6
PU (piece)
1 or 5
1 or 5
1 or 5
1 or 5
5
5
1 or 5
1,0 m
picture
1
2
3
4
5
5
6
Power sockets series PPS
Dimensions:
PPS D
Technical data
PPS F
PPS USA
PPS D
250 V AC
10 A DC / 16 A AC
PPS F
PPS USA
250 V AC
125 V AC
10 A DC / 16 A AC
15 A AC
CuZn37
PA
grau
– 20 °C (- 4 °F) ... + 60 °C (+ 140 °F)
snap fastening for 35mm profile bars according to EN 60715
single filament: 0,2 - 4 mm2 / fine multi-filament: 0,2 - 2,5 mm2 / AWG 24 - AWG 12
8 mm
IEC 83, DIN 49440-1
UL
Rated voltage
Nominal current
Contact material
Insulating material
Colour
Operating temperature
Mounting method
Conductor cross-section
Bare length
Standards / Approvals
Pressure compensation device PPC
Thread
Material
Operating temperature
Colour
System of protection
PU (piece)
M12 x 1,5 - 10 mm
polyamide 6, O ring: perbunan
- 40 °C (- 40 °F) ... + 120 °C (+ 248 °F)
RAL 7035
IP 66, 68 + 69K
5
Mounting support PDR
Technical data
Fastening
Material
Operating/Storage temperature
Dimensions
Weight
self-adhesive
sheet steel, galvanized
- 30 °C (- 22 °F) ... + 70 °C (+ 158 °F)
H 35 x W 70 x D 7 mm
approx. 25 g
Load *
500 g after 24h waiting period
* The smooth surface have to be free of dust, oil and separate means for mounting
130
PDR is a mounting support, for installation of e.g. thermostats or hygrostats
in small enclosures without drilling or
screwing.
At the backside of the PDR is a selfadhesive foam strip, first developed for
space travel and aviation.
We reserve the right to technical alterations.Subject to correction. 075000053
Technical data
ELECTRO-TECHNOLOGY FOR INDUSTRY
The BR 35 and BR 50 Signal Towers
Choose safety, wherever equipment is required to display machine status
and provide warning signals!
To supplement their air-conditioning equipment, Pfannenberg also manufacture machine identification lights for control equipment and
automation systems. The slimline, elegant shape and the intrinsic values of BR 35 signal towers ensure that they are placed more and
more frequently on machines in the electrical industry, in medicine technology and in laboratories. With an IP 54 protection system, they
are an excellent choice for all indoor applications.
• modular design with six different coloured elements – red, yellow,
amber, green, clear, blue – and six different mounting methods for an
infinite number of combinations
• high level of protection against electric shock
• the light is intensified by the prismatic arrangement inside the impactand heat-resistant, dustproof polycarbonate globes and is clearly
visible from all sides
• sophisticated design with a mere 35 mm in cross-section
• the BR 35 is the crowning glory on machinery and production lines
• under both technological and economical aspects, the ideal solution
for any application
• design patent No. 9706583.8,
utility model registration No. 29716867.3
IP 54
Available with sounder!
*
+ 55 °C
– 35 °C
* 24V DC
System of
protection
The sturdy stacklight BR 50: for all in- and outdoor applications – for industrial use with IP 54 or IP 55.
• wherever equipment is required to display machine status and
provide warning signals
LED-Generation-Multi LED BA 15d
Energy- and cost-saving high-performance SMD LED replace
light bulbs
• extremely long service life (>50.000 hours)
• selection of colours: white, yellow, red, blue and green
Please ask for your copy of our signal tower brochure.
as five modules with a choice of six globe colours can be simply
plugged together in any permutation, even at a later point in time
• the mechanical and electronic systems are decoupled to produce a
stable construction insensitive to vibration
• you have the choice between four different modules:
module with continuous beam max. 7 W
blinking-light module max. 7 W
flashing-light module max. 1 joules
acoustic module 85 dB (A)
• versatility in installation: Also the mounting methods we offer leave
nothing to be desired. Stand, tube or direct mounting.
• the environmentally friendly materials used in manufacture comply
with the DIN ISO 14000
• tool for lamp replacement
• BR 50-LED for Ex applications
available
IP 54
System of
protection
IP 65
+ 45 °C
+ 60 °C
– 25 °C
– 30 °C
90%
System of
Operating
Storage
Relative
protection temperature temperature humidity
(with LED)
(optional extra)
(Listed)
131
We reserve the right to technical alterations.Subject to correction. 075000053
• a flexible modular system guarantees easy operation. Up to as many
How to select the right components for air
your enclosures!
Excellent in capacity – unique in design!
Ever since components have been made to control electrotechnical
tasks, heat loss has been a subject to take into consideration.
The demand for cool and filtered air led to the first filterfan being
developed by Pfannenberg nearly 50 years ago.
Major problems with heat caused excessive dust accumulation in
switchgear equipment because the doors were left open during
the summer to allow the equipment to cool down. This can result
in fluctuations in temperature. This leads to stress situations that
can considerably reduce the service life of electronic components
(see diagram).
In 1989 Pfannenberg introduced a completely new range of filterfans
to meet the requirements of a changing market. With a considerable
reduction in installation time in mind we created the snap-fitting
mechanism. The specifications for a non-bolted filterfan system are
demanding. Extremely fluctuating temperatures and the mechanical
strain due to transport or slamming enclosure doors must not be
allowed to cause failure. The shock and vibration tests conducted by
“Germanischer Lloyd” certify the excellence of our snap-fitting
system (European-Patent No. 0439667).
We are at your disposal, 24 hours a day.
In the course of development absolute priority was given to the
use of high-quality components (plastic material, fan, filter mat) and
comprehensive transparent technical data.
For this purpose we measured every filterfan and exhaust filter in a
test laboratory. All the relevant data for our cooling units and air-/
water heat exchangers result from tests in our own climatic chamber.
100
Semiconductor
Resulting from many years of experience and close cooperation with
customers and numerous laboratory measuring systems we are proud
to present the extra servicefriendly 4th Generation of filterfans.
Please find additional information starting from page 76 as well as
under the internet domain www. filterfan.com.
Years
10
Electrolytcondenser
1
The following pages are designed to provide support on the selection
of the required cooling components.
0,1
20
30
40
50
60
70
80
90
°C
The diagram demonstrates the relationship between temperature and service life.
132
We reserve the right to technical alterations.Subject to correction. 075000053
www.pfannenberg.com
conditioning
ELECTRO-TECHNOLOGY FOR INDUSTRY
Heat dissipation by natural convection
If the ambient temperature is lower than the temperature inside the
enclosure the dissipated heat escapes into the atmosphere through the
surface of the enclosure. The following simple equation is used to
calculate nearly the level of heat radiated from an enclosuret:
Using the characteristic curves for the cooling units properly.
In this catalogue you will find a diagram for every Pfannenberg cooling
unit showing the relevant characteristic curves. This diagram allows
you to ascertain the corresponding effective (useful) refrigeration
capacity for any temperature.
PR [W] = c x A x ΔT
1600
25 K
1200
Example:
20 K
Ta = 40 °C; Ti = 35 °C.
800
15 K
400
10 K
7,5 K
5K
Go to the known ambient temperature (Ta = 40 °C) and trace a vertical
line up to the intersection with the +35 °C line. Now, trace a horizontal
line left of that intersection until it meets with the ordinate (vertical axis).
This point shows the refrigeration capacity required. In our example the
value is 1040 W.
0
0
2
4
6
8
10
12
Enclosure surface A [m2]
Heat dissipation with a cooling unit
Pfannenberg air/refrigerant cooling units operate on the principle of
the Carnot cycle. This means that the cooling unit functions as a heat
pump that “pumps” the thermal energy dissipated from the enclosure
(heat dissipated from the components) up to a higher level of temperature (the ambient temperature can reach levels as high as + 55°C).
The air inside the enclosure is cooled down by the evaporator and is
at the same time dehumidified.
Cooling units are used if:
the outside air cannot be used for cooling
the required temperature inside the enclosure should be equal to
or lower than the required ambient temperature
the ambient air is extremely oily or rife with conductive dust.
Selecting cooling units:
Ascertain the total dissipation loss from the components installed
in the enclosure. Take into account the simultaneity factor. Only
rarely are all components in operation at the same time.
Also take the heat radiation from the enclosure into account.
If Ti < Ta, this must also be added to the dissipation loss value.
PSS
Use the Pfannenberg-Software-Service, PSS considers
self-convection for calculation and demonstrates it. You
can download a free version on www.pfannenberg.com
Refrigeration capacity
Q0 [Watt]
Temperature inside
enclosure Ti
1750
1500
1250
1000
+ 45 °C
+ 35 °C
750
+ 25 °C
500
25
35
45
55 Ta [°C]
Ambient air temperature
133
We reserve the right to technical alterations.Subject to correction. 075000053
Radiation efficiency P [W]
Now select the necessary cooling unit in accordance with the
required refrigeration capacity, ensuring that the cooling capacity
of the cooling unit is at least equal to the dissipation loss value.
Preferable is a figure 10% in excess of that value.
How to select the right components for air
your enclosures!
The refrigeration capacity should exceed the dissipation loss from
the installed components by approx. 10 %.
The enclosure must be adequately sealed to prevent the inflow of
ambient air.
Pfannenberg offers a wide range of air / water heat exchangers:
with top- and side-mounted units with a refrigeration capacity from
650 W to 5000 W.
The ideal application is in harsh ambient conditions such as oily air.
If a cooling water system with sufficient capacity is already in
place you should seriously consider the use of air / water heat
exchangers.
Avoid excessive flow velocity in the piping system.
Cavitation can cause leaks. The max. flow velocity should not
exceed 3 m/s.
Use the door contact switch to impede operation with open doors
and consequent excessive accumulation of condensation.
Use cooling units with a generous clearance between air inflow and
air outflow to prevent poor circulation.
Attach the condensate overflow hose included in the package of
accessories supplied with the unit.
Make sure that the air inflow and air outflow in the external circuit
of the cooling unit circulates satisfactorily to ensure that the thermal
energy is released into the ambience.
Make sure that the water intake temperature is not too low.
Temperatures below 15 °C lead to excessive accumulation of condensation. This means that part of the capacity is used to cope
with the condensation and is therefore no longer available for cooling
the air inside the enclosure.
When using top-mounted cooling units, make sure that components
with their own fans do not expel the air directly into the cooling unit’s
cool air outflow. This counteraction between the two airflows would
otherwise substantially reduce the refrigeration capacity and could
cause heat pockets.
Use the Pfannenberg-Software-Service, PSS considers
self-convection for calculation and demonstrates it. You
can download a free version on www.pfannenberg.com
Make sure that the enclosure stands up straight.
Otherwise the condensation cannot drain properly from the topmounted unit.
The lowest temperature inside the enclosure is not the best.
The value we have preset (35 °C) is a sound compromise between
service life and accumulation of condensation.
Heat dissipation with air/water
heat exchangers
With their elementary compact design, air/water heat exchangers allow
you to cool an enclosure particularly effectively.
Since the capacity data for air / water heat exchangers are not
governed by any standards (such as DIN 3168 / pr EN 814 T5)
Pfannenberg has drawn on data gathered from experience:
Water intake temperature:
Tw = 10 resp. 20 °C
Temperature inside enclosure:
Ti = 35 °C
Water flow volume:
vw = 400 l / h
134
PSS
600 ltr. / h
4500
400 ltr. / h
200 ltr. / h
4000
Effective refrigeration capacity [W]
3500
3000
2500
2000
1500
1000
0500
10
15
20
25
Water intake temperature [°C]
We reserve the right to technical alterations.Subject to correction. 075000053
Important information on the utilization of cooling units:
conditioning
ELECTRO-TECHNOLOGY FOR INDUSTRY
Heat dissipation with filterfans
Formula expressions:
Simple equation for calculating the required air flow volume:
A [m2]:
3,1 · Pv 3
v· =
[m /h]
ΔT
c [W / m2 K]: Coefficient of heat transmission:
Radiation power per 1 m2 surface area and
1K difference in temperature.
This constant is determined by the material:
Sheet steel
– 5.5 W/ m2 K
Stainless steel – 4.5 W/ m2 K
Aluminium
– 12.0 W/ m2 K
Plastic/Polyester – 3.5 W/ m2 K
PT [W]:
Thermal power of a radiant heater
Q0 [W]:
Refrigeration capacity of a cooling unit:
Only the effective or useful cooling capacity
is shown
PR [W]:
Radiation power: Thermal power radiated
from the surface area of the enclosure into
the ambience or radiated from the ambience
into the enclosure.
The surface area of the enclosure is measured
according to the specifications of VDE 0660,
Part 507
Pd [W]:
Dissipation loss: Thermal power generated
inside an enclosure by dissipation loss from
components
Ti [°C]:
Maximum admissible temperature inside the
enclosure: This value reflects the maximum
operating temperature of components
installed in the enclosure. This usually ranges
from approx. 35 °C to 45 °C
Ta [°C]:
Maximum ambient temperature:
Temperature at which the enclosure is
installed
Heat supply with heating
Tw [°C]:
Water intake temperature
In certain applications it may be necessary to fit switch cabinets with heating
devices to maintain and reach minimal temperatures or to avoid condensation.
Also for these requirements Pfannenberg offers a simple tool. Please download
the PSS heating program for free at http//www.pfannenberg.com.
v [m3/ h]:
Flow volume for a filterfan
vw [l / h]:
Water volume: Volume of water pumped
through an air / water heat exchanger
Δ T [K]:
Difference in temperature between the
ambience and inside of the enclosure
EMC-shielded filterfans
On the first pages have we already informed you about our new filterfans. The
PF 11.000 to PF 67.000 range and the corresponding exhaust filters are
available in EMC-shielded versions. Back in 1991, Pfannenberg was the first in
the industry who introduced two EMC-shielded filterfans to the market. With
the new system, Pfannenberg has once again set a sign. Especially in terms of
the environmentally friendly and discriminate use of material. A particular point
to emphasize is that with this version you can also do without the dreary task of
screw fixing the equipment.
135
We reserve the right to technical alterations.Subject to correction. 075000053
Please take the following into account when considering the use of
filterfans:
Always use the filterfan to propel the cool ambient air into the enclosure.
This ensures that slight positive pressure builds up inside the enclosure in
comparison to the ambience and that only air filtered by the filterfan flows
into the enclosure. The air propelled into the enclosure displaces the warm
air which exits through the exhaust filter. If however the air is drawn out of
the enclosure by suction power, unfiltered air can also enter through gaps
and components.
If you install a combination of filterfan / exhaust filter, fit the filterfan into the
lower third of the enclosure if possible. The exhaust filter must be installed
as near to the top as possible to prevent hot spots in the upper part of the
enclosure.
In enclosures consisting of several compartments, the cool air capacity
required should be divided among two or more filterfans / exhaust filters.
This measure helps to ensure a more acceptable distribution of temperature
throughout the enclosure.
If you combine a filterfan with two exhaust filters, the cool air divides into
a Y-shape. In this way, with just one additional exhaust filter you can
considerably improve the circulation inside the enclosure.
Install a thermostat that only trips the filterfan when the temperature is too
high. This can quite substantially increase the service life of your filter mat.
Surface area of enclosure:
Effective surface area of a enclosure
measured according to the specifications
of VDE 0660, Part 507
Service and Product Validation
Do you have a ground-breaking idea for a product, but don’t have the
necessary resources or know-how to develop it? Do you have a product,
but don’t have the necessary resources or know-how to validate the features and applications for it?
If you can answer ‘Yes’ to either of the above, then why not avail of the
extensive knowledge and more than 50 years worth of experience of the
Pfannenberg company, as well as our highly-qualified technical personnel and our extensive and modern laboratory facilities to support you in
your endeavour?
As a manufacturer of product ranges for industrial electronic enclosure cooling as well as products for optical and acoustic warning and
emergency signals, we are happy to offer you qualified support to realise your products, from the idea, through validation and cost-optimised production on your assembly line.
Product Development
Product Validation
We offer the following services when realising and assembling your
product idea:
When validating your product, or benchmarking, we can offer the
following services:
developing the concept, taking into account the technical
demands, costs, deadline, national and international
regulations and policies
testing whether or not the product is patentable
design using the most diverse testing tools
construction using modern 3-D construction software
construction of a prototype in our well-equipped prototype
workshop
product validation
creating the product specification and equipment (list of parts,
diagrams, assembly instructions, test instructions and
equipment and so on)
136
delivery to customers and supervision of the beginning of
production
Environmental conditioning
Our well-equipped double climatic chamber can reach temperatures
of between -40% to +70% °C with relative humidity of 0-99%. Test
pieces can be connected up to 500V 50/60Hz.
Each chamber has a self-contained data logging system, with sensors
of all types connected, which allow the operating parameters of your
test piece, as set by you, to be measured and be documented on our
modern computer-aided data logging system.
We reserve the right to technical alterations.Subject to correction. 075000053
N
Pfannenberg
–
Your
Partner
for
!
EW
ELECTRO-TECHNOLOGY FOR INDUSTRY
Infra-red measurement
To visualise the temperature distribution of your test piece under varying
environments or environmental conditions, and to be able to identify
possible thermic problem areas quickly, we offer thermographic
records, in which different temperature zones are displayed in colour.
Transport
and vibration checks
If the behaviour of your test
piece is tested under transport
conditions (drop, shock and
vibration) or under seismic loads
(earthquake), we will advise and
support you with many years of
experience in developing concepts, preparation and carrying
out these tests.
We reserve the right to technical alterations.Subject to correction. 075000053
Flow simulation
Our state of the art CFD-Software (Computational
Fluid Dynamics) permits to conduct flow simulation
on your products based on your input. The resulting
temperature and pressure distribution can be graphically displayed. Furthermore, this allows conducting
parametric studies of your system without having to
build expensive prototypes.
Airflow checks
To generate the airflow required by your test piece, we offer
you corresponding readings from our air flow checks with a
DIN EN ISO 5167-2 measurement process (air volume
currents of 3-2000 m3/h can be measured on 6 measurement
sections here).
137
EMC Checks
Your test piece will be examined for
connection-related interference.
In addition, we are happy to support and
advise you with regard to further tests on
electromagnetic compatibility.
Our spraying device (in accordance with UL 50)
enables your test piece to be tested against the
entry of spray (Atomised Water Test UL 50).
Noise emission
For benchmark measurements, we can check the
acoustic pressure or the acoustic power of your
test piece (depending on the procedure used for
coating the surface) in our facilities using our
noise measurement devices, or we can design,
prepare and supervise readings in a soundproof
room with a reflective floor (free field) for example,
in accordance with ISO 3744.
Photometry
To determine the luminosity and other optical characteristic values
of your light-emitting test piece, we offer experiments in our own light
measurement canal.
138
We reserve the right to technical alterations.Subject to correction. 075000053
Checks on system of protection (IP, UL)
Smaller test pieces can be tested in our dust
chamber with regard to protection from the entry of
dust (IP 5x).
Using our standardised spraying device, test pieces
can be tested for protection from the entry of spray
(IP x4).
ELECTRO-TECHNOLOGY FOR INDUSTRY
Pictogram legend…
Sample order …
…for cooling units
…for cooling units
IP 54
Model
Unit with IP 54 protection
system vis-à-vis enclosure
Cooling
capacity
Several capacities share the same Long air passage in the enclosure
installation cutout for the enclosure provides optimum in air circulation
DTI 9441 2000 W
A minimum in installation
depth for space-saving fitting
Units run on both 50 Hz
and 60 Hz mains frequency
External mounting
Partially recessed installation
RAL
Recessed installation possible
with installation frame
Eyebolts installation
Rated voltage
Special functions
400 V
CC, MM, RAL 7035, V2A
DTI – partially recessed door- or side-mounted
DTS – door- or side-mounted
DTD – top-mounted
CC
MM
RAL
V2A
=
=
=
=
Comfort-Controller
Multi-Master
RAL code for special colour finish – on request
cover made of 1.4301 stainless steel
V2A
Colour
GOST approval
Unit in 1.4301 stainless steel
SC
CC
MC
Standard-Controller
Comfort-Controller
Multi-Controller
…for Filterfans series 4th Generation
PF
32.000
24 V DC EMC RAL 9011 IP 55
230 V
DTc
CM
Design
integration
Integrated, self regulated
condensate evaporation
115 V
Lowest clearance
115V to 230V
operating range
…for Filterfans
IP 55
EMC
IP protection system
provided used
for design purposes only
The standards define
electromagnetic
compatibility
AC
DC
Alternating current
Direct current
Change of air flow direction
UV-resistant
4 corner fastening system
PFA
= Exhaust filter
Model size:
11.000
22.000
32.000
42.500
43.000
65.000
66.000
67.000
Protection
system:
IP 54
IP 55
Connection
voltage
12 V DC
400 V AC
Special functions:
EMC = Electromagnetic compatibility
„A“ = Direction of air delivery*
Safe installation
Cover in special colour:
on request
e.g. RAL 7035
4
Click and fit!
= Filterfan
A minimum in installation
depth for space-saving fitting
UV
Installation with bolts
PF
Installation without tools
90°
90°
Simple click and fit!
without tools
Fan rotating by 90°
GOST approval
Spring clip orinciple
In-line mounting
Shipping register
You will understand that, for technical reasons, some theoretical
combinations would be senseless in practice.
Please give us a call!
* Standard direction is air blown into the enclosure.
Direction “A” is air sucked out from the enclosure.
We reserve the right to technical alterations.Subject to correction. 075000053
▲
▲▲
mm
▲▲
100
▲
ELECTRO-TECHNOLOGY FOR INDUSTRY
PSS
A
t Pfannenberg, air conditioning experts versed in industrial applications are at your disposal – from consulting and planning
services up to installation and after-sales service. Irrespective of whether
your concerns involve a small piece of equipment or a major plant, a
standard solution or a custom-built design – at Pfannenberg your problems
and your orders are in the very best of hands.
Our PC application PSS (Pfannenberg Software Service), which is easily
available free of charge on request and allows you to run it yourself
at your own leisure, will help you to find the ideal components for your
air conditioning application. The PSS medium is available in 8 different
languages.
Hotline 040 / 73 412-106 • Fax 040 / 734 12-101
Or simply log onto our Internet webpage (www.pfannenberg.com) and
download PSS – fast and conveniently. We will also be happy to provide
We reserve the right to technical alterations.Subject to correction. 075000053
you with support at your premises with training courses and seminars.
International Support Organisations
Headquarter:
Pfannenberg GmbH
Werner-Witt-Strasse 1 – D-21035 Hamburg
P.O. Box 80 07 47
– D-21007 Hamburg
Phone: ++ 49 40 / 7 34 12-0
Fax:
++ 49 40 / 7 34 12-101
sales.support @pfannenberg.com
http: // www.pfannenberg.com
http: // www.filterfan.com
A number of leading companies – for example in the car
industry or in engineering – rely on Pfannenberg for airconditioning enclosures. Pfannenberg’s philosophy is to
develop an ongoing partnership with a view to meeting
the criteria of their customers by offering reliable quality
products in the form of standard and customised units.
This catalogue is merely able to provide you with a summary of our products and services. We therefore ask you
to contact us if you’re looking for something out of the
ordinary or need a custom design. Your problems and
needs are a challenge for us. Just give us a call.
Local agency:
ELECTRO-TECHNOLOGY FOR INDUSTRY
All transactions subject to the general terms and conditions of the ZVEI.
In conformity with our policy of continuous development we reserve the right for
technical alterations. Subject to correction. This paper is manufactured from
chlorine-free bleached pulp KE / 3500 /03.2007 / 075000053
Asia Pacific regional office Pfannenberg Asia Pacific Pte Ltd.
371 Beach Road
# 02-07, Keypoint
Singapore 199597
phone: 0065 6293 9040
telefax: 0065 6299 3184
e-mail:
[email protected]
Australia
HSC Pfannenberg
10 Remillies Way
Beaumont Hills
2155 NSW Sydney
phone/telefax: 02 / 8824 3213 e-mail:
[email protected]
Austria
Pfannenberg GmbH
Austria Branch Office
Köstlergasse 11/14
1060 Wien
phone: 1 / 581 11 66
telefax: 1 / 591 11 45
e-mail: heinrich.zeman
@pfannenberg.com
Joachim Hoitsch
Am Sonnengrund 41
8152 Graz/Stallhofen
phone: 03142 / 203 86
telefax: 03142 / 203 96
e-mail: [email protected]
pfannenberg.com
Belgium
Electro-Flandria n.v.-s.a.
Begoniastraat 6
9810 Nazareth-Eke
phone: 09 / 385 51 11
telefax: 09 / 385 64 30
e-mail: [email protected]
Brazil
TASCO LTDA.
1) Av. Veread. José Angelo
Biagioni, 850
18550-000 Boituva – SP
phone: 015 / 263 -14 93
telefax: 015 / 263 -26 66
2) R. Américo Brasiliense
2171-Cj. 709
Chácara Santo Antonio
04715-005 Sao Paulo – SP
phone: 011 / 5183-59 95
telefax: 011 / 5183-40 86
e-mail: [email protected]
Bulgaria
Eurotrade Ltd.
Hristo Botev bul. 92/B
Rilon Center sector A
Plodiv 4000
phone/telefax: 32 / 655 021
e-mail: [email protected] Canada
Pfannenberg Inc.
68 Ward Road
Lancaster, N.Y. 14086
phone: 716 / 685-68 66
telefax: 716 / 681-15 21
e-mail: blaine.witt
@pfannenbergusa.com
China
Pfannenberg China c/o GPS
Procurement (Shanghai) Co. Ltd
Shanghai Stock Exchange
Building
No. 528, Pudong Road South
North Tower, Unit 2402
Shanghai 200120
phone: 86-21 / 688 247 55
telefax: 86-21 / 688 247 58
e-mail: [email protected]
Croatia
Elektro Partner d.o.o.
Radnicka cesta 22 / II
10000 Zagreb
phone: 01 / 618 47 93
telefax: 01 / 618 47 95
e-mail:
[email protected]
Czech Republic
Weidmüller, s.r.o.
Videnská 340 · 252 42 Vestec
phone: 02 / 44 00 14 00
telefax: 02 / 44 00 14 99
e-mail:
[email protected]
Denmark
CARLO GAVAZZI HANDEL A/S Over Hadstenvej 42
8370 Hadsten
phone: 89 60 61 00
telefax: 86 98 15 30
e-mail: [email protected]
Estonia
Klinkmann Eesti AS
Mehaanika 2 B · 10602 Tallinn
phone: 06 / 564 069
telefax: 06 / 543 503
e-mail:
[email protected]
Finland
Oy Klinkmann AB
Fonseenintie 3 · 00371 Helsinki
phone: 09 / 540 49 40
telefax: 09 / 541 35 41
e-mail: [email protected]
France
Pfannenberg France S.A.
44, Rue Armand Carrel
93108 Montreuil Cedex
phone: + 33 (0) 1 48 57 07 72
telefax: + 33 (0) 1 48 57 82 24
e-mail:
[email protected]
Great Britain
Pfannenberg (UK) Ltd.
Unit 6C · Aspen Court · Aspen Way
Centurion Business Park
Rotherham S60 1FB
phone: 01709 / 36 48 44
telefax: 01709 / 36 42 11
e-mail: mark.rosten-edwards
@pfannenberg.co.uk
Greece
KALAMARAKIS-SAPOUNAS S.A.
Ionias & Neromilou Str.
13671 Chamomilos
Achames/Athen
phone: 030 / 210 240 6006
telefax: 030 / 210 240 6007
e-mail: [email protected]
Hungary
Trendelektro Kft.
Dombóvári u. 5 –7 ·1117 Budapest
phone: 01 / 464 31 18
telefax: 01 / 464 31 19
e-mail:[email protected]
Indonesia
PT Guna Elektro GAE
Electrical & Mechanical Products
Jl. Arjuna Utara 50
Jakarta Barat 1510
phone: 021 / 565 50 10
telefax: 021 / 568 90 07
e-mail: [email protected]
Ireland
Pfannenberg (UK) Ltd.
Unit 6C · Aspen Court · Aspen Way
Centurion Business Park
Rotherham S60 1FB
phone: 0044 1709 / 36 48 44
telefax: 0044 1709 / 36 42 11
e-mail: mark.rosten-edwards
@pfannenberg.co.uk
Israel
ATEKA LTD.
23, Hayetzira St., Kiryat Aryeh
Petach-Tikva 49512
phone: 03 939 23 03
telefax: 03 924 32 73
e-mail: [email protected]
Italy
Pfannenberg Italia s.r.l.
Via La Bionda, 13
43036 Fidenza (PR)
phone: 0524 / 51 67 11
telefax: 0524 / 51 67 90
e-mail: [email protected]
Japan
Naigai Energering Inc.
4 -1-1 Takaida hon-dori
577-8551 Higasi-Osaka
City Osaka
phone: 06 / 67 82 05 70
telefax: 06 / 67 82 05 11
e-mail: [email protected]
Kazakhstan
Electric Light
Auezova str. 84, office 310
050008 Almaty
phone: 3272 / 421 709
telefax: 3271 / 423 518
e-mail: [email protected]
Korea
SungWon Hitech Inc.
Rm.404, Yooyoung-town, Lot3,
Block 12 · Dangjeong-dong.
Gunpo-si, Gyenggi-do
phone: 031 / 427 65 54
telefax: 031 / 427 65 55
e-mail:
[email protected]
Latvia
Klinkmann Villa
STABU IELA 19-3B · 1011 Riga
phone: 0750 / 63 07
telefax: 0750 / 63 08
e-mail: [email protected]
Lithuania
Klinkmann Lit
Mindaugo 42 · 2006 Vilnius
phone: 02 / 251 646, 262 572
telefax: 02 / 262 641
e-mail: [email protected]
Malaysia
EITA Electric SDN. BHD.
Subang Jaya Industrial Estate
Block A, Lot 4, Jalan SS 13/7
47500 Petaling Jaya
phone: 603 563 780 88
telefax: 603 563 547 19
Mexico
Sistemas de Gestión Climàtica
PFA de México S.A. de C.V.
Insurgentes Sur · 1548 Edificio Anexo
Piso 1 Col. Crédito Constructor
C.P. 03940 · México D.F.
phone: 52(55) 566 344 47/76
telefax: 52(55) 566 344 47/76
e-mail: [email protected]
Netherlands
Eldon N.V.
Tussendiepen 64-66 · 9200 AA Drachten
phone: 0512 / 58 01 232
telefax: 0512 / 51 71 17
e-mail: [email protected]
Norway
Hydro Aluminium
Hydal AS · 4265 Havik
phone: 52 84 81 00
telefax: 52 84 81 60
Poland
Automatech Sp.z o.o.
ul. Ryzowa 84 · 05-815 Opacz-Kolonia
phone: 022-723 06 06
telefax: 022-723 06 62
e-mail: [email protected]
Portugal
Olaer Oiltech Ibérica S.A.U.
Travesia Industrial, 29
08907 L’Hospitalet de Ll. (BCN)
phone: 933 / 368 900
telefax: 933 / 357 186
e-mail: [email protected]
Romania
R.T.S. Electro
39 Velintei Str. · 022964 Bucharest 2
phone: 21 / 241 46 26 / 46 77
telefax: 21 / 241 47 73
e-mail:[email protected]
Russia
Pfannenberg GmbH c/o
Weidmueller Representative Office
Shabolovka 2 · 119049 Moscow
phone: 495 786 68 67
telefax: 495 786 68 69
e-mail:[email protected]
Slovakia
Elektris s.r.o.
Racianska 188 · 83153 Bratislava
phone: 02 / 4920 0113
telefax: 02 / 4468 03 28
e-mail: [email protected]
Slovenia
Elektrospoji d.o.o.
Stegne 25 · 1000 Ljubljana
phone: 01 / 511 38 10
telefax: 01 / 511 16 04
e-mail: [email protected]
South Africa
Phambili Interface (Pty) Ltd
5 Bundo Road, Sebenza
P. O. Box 193 · 1610 Edenvale
phone: 011 / 452 19 30
telefax: 011 / 452 64 55
e-mail: [email protected]
Spain
Olaer Oiltech Ibérica S.A.U.
Travesia Industrial, 29
08907 L’Hospitalet de Ll. (BCN)
phone: 933 / 368 900
telefax: 933 / 357 186
e-mail: [email protected]
Sweden
Weidmüller AB
1) Skebokvarnsvägen 370
12450 Bandhagen
phone: 08 / 727 23 00
telefax: 08 / 727 24 80
2) Axel Danielssons v. 271
Box 31025 · 20049 Malmö
phone: 040 / 37 48 00
telefax: 040 / 37 48 60
e-mail: [email protected]
Switzerland
Carl Geisser AG
Industriestraße 7 · 8117 Fällanden ZH
phone: 044 / 806 65 00
telefax: 044 / 806 65 01
e-mail: [email protected]
Turkey
Endaks Endustryel Aksesuarlar LTD. STI
Perpa Ticaret Merkezi
A Blok Kat 5 No. 292
80270 Okmeydani – Istanbul
phone: 90 / 212 222 22 75
telefax: 90 / 212 220 10 47
e-mail: [email protected]
United Arab Emirates
Golden Sand Trading Est.
202, Bin Ham Building · Dubai
phone: 4 / 359 56 11
telefax: 4 / 359 54 73
e-mail: [email protected]
United States of America
Pfannenberg Inc.
68 Ward Road · Lancaster, N.Y. 14086
phone: 716 / 685-68 66
telefax: 716 / 681-15 21
e-mail:[email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement