PACSystems RX3i Controllers

PACSystems RX3i Controllers
PACSystems RX3i Mid-Range Controller
PACSystems Control
PACSystems RX3i Controllers
PACSystems RX3i is the high performance, modular and scalable control system that supports the PACSystem engine. This
rack-based system is built on PCI standards and provides fast, consistent control between the modules. In addition to more
than one hundred discrete and process I/O points, the PACSystems RX3i features:
~ PACSystems High Availability – This
scalable, synchronized, hot-standby
redundancy control platform helps
ensure uninterrupted control of your
applications and processes — with
total transparency.
~ PACMotion Controller – Our versatile
servo motion controller combines
the benefits of a highly integrated
motion and machine logic solution,
with the performance, flexibility and
scalability required for advanced
machine automation.
Power Supplies
~ Proficy Process Systems – A
scalable, fully integrated system for
process automation and control.
~ Integrated PROFINET provides real
time control of distributed I/O.
PACSystems RX3i also offers an
outstanding migration path for
moving any Series 90 application to
the PACSystems architecture.
~ Proficy Machine Edition – Develop,
configure and maintain all of your
control functions including motion,
visualization and networking with
complete software package.
pages 1.11-1.14
Discrete Input Modules
Discrete Output Modules
pages 1.14-1.16
Analog Input Modules
Analog Output Modules
pages 1.17-1.21
pages 1.22-1.26
pages 1.27-1.30
Pneumatic Module
Expansion Modules
page 1.51
page 1.52
Baseplates
CPUs
pages 1.7-1.8
Specialty Modules
page 1.10
pages 1.31-1.42, 1.46
Serial Communication Modules
PACMotion
Publication Reference Chart
pages 1.47-1.48
Networks and Distributed
I/O Systems
pages 1.43-1.44
RX3i Accessories
pages 1.53-1.57
GFK-2222
PACSystems CPU Reference Manual
GFK-2224
TCP/IP Ethernet Communications for
PACSystems
GFK-2225
PACSystems Station Manager User’s
Manual
GFK-2259
C Programmer’s Toolkit for PACSystems
User’s Manual
α and βi Series Servo Amplifiers
GFK-2308
PACSystems Hot Standby CPU
Redundancy User’s Manual
VersaMotion
GFK-2314
PACSystems RX3i Hardware and
Installation Manual
1.6
GE Intelligent Platforms Control Systems Solutions
page 1.45
RX3i Configuration Guidelines
pages 1.58-1.60
page 1.61
pages 1.62-1.70
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
CPUs
The high-performance CPU is based on the latest technology processor with fast computation
and high throughput. The controller can manage up to 32K of I/O in a number of standard
languages. The powerful CPU enables complex applications to be easily solved with the high
performance processor and up to 64 Mbytes of user memory. The RX3i supports multiple IEC
languages and C programming to give you program flexibility. The RX3i increases machine
cycle times, reduces downtime with its extensive diagnostics and hot swap capability, and
enables you to store large amounts of data to reduce external hardware cost.
Product Name
Lifecycle Status
Module Type
Backplane Support
Boolean Execution Speed (ms/K)
User Logic Memory
IC695CPE305
IC695CPE310
IC695CPU320
IC695CPU315
RX3i CPU with built-in USB
Master port, Ethernet port
and serial port
RX3i CPU with built-in USB
Master port, Ethernet port
and 2 serial ports
RX3i CPU with two built-in
serial ports
RX3i CPU with two built-in
serial ports
Active
Active
Active
Active
Controller
Controller
Controller
Controller
Universal Backplane Only.
Uses PCI Bus.
Universal Backplane Only.
Uses PCI Bus.
Universal Backplane Only.
Uses PCI Bus.
Universal Backplane Only.
Uses PCI Bus.
.072
.072
0.047
0.047
5Meg bytes
10Meg bytes
64Mega bytes
20Meg bytes
Yes
Yes
Yes
Yes
Energy Pack Support
(Battery-less Backup)
Energy Pack Support
(Battery-less Backup)
Battery Backup only
Battery Backup only
I/O Discrete Points
32K
32K
32K
32K
I/O Analog Points
32K
32K
32K
32K
Battery Backed Real Time Clock
Dynamic Data Back-up
SRAM, Flash
SRAM, Flash
SRAM, Flash
SRAM, Flash
Processor Speed (MHz)
1.1GHz
1.1GHz
1GHz
1GHz
Yes. CPU application upload/
download to a Thumb Drive or
Smart Phone
No
No
USB -A 2.0 Master Port
Yes. CPU application upload/
download to a Thumb Drive or
Smart Phone
Built-in Ethernet Ports
One RJ-45 port, 10/100Mbaud.
SRTP support for
programmer only
One RJ-45 port, 10/100Mbaud.
SRTP support for
programmer only
Built-in Serial Ports
One RS-232 port.
One RS-485 port and one RS-232
One RS-485 port and one
One RS-485 port and one RS-232
Supports SNP, Serial I/O, Modbus
port. Supports SNP, Serial I/O,
RS-232 port. Supports SNP, Serial
port. Supports SNP, Serial I/O,
Slave and Modbus Master
Modbus Slave and Modbus
I/O, Modbus Slave and Modbus
Modbus Slave and Modbus
(Application code)
Master (Application code)
Master (Application code)
Master (Application code)
Type of Memory Storage
Total Number of Local Racks
8
8
Ethernet (PROFINET, Ethernet Global Data, Channels, Modbus TCP Server and Client), Genius, PROFIBUS DP, DeviceNet
Software Programming Support
Proficy Machine Edition Logic
Developer Professional edition
7.0 SIM 3 or above
Proficy Machine Edition Logic
Developer Professional edition
7.0 SIM 3 or above
Program Languages Supported
Ladder Logic, Structured Text,
C, Function Block Diagram
Ladder Logic, Structured Text,
C, Function Block Diagram
Internal Power Used
Number of Slots Module
Occupies on Backplane
www.ge-ip.com
8
Serial, Genius, CMX (Reflective Memory), Ethernet
Communications Options
Field Busses/Device Networks
8
+3.3 VDC: 1.0 A +5 VDC: 1.0 A
+3.3 VDC: 1.0 A +5 VDC: 1.0 A
(up to 1.5 A if USB is fully loaded (up to 1.5 A if USB is fully loaded
with 0.5 A) +24 VDC: 0.5A at
with 0.5 A) +24 VDC: 0.5A at
startup, 0.1 A during run time
startup, 0.1 A during run time
(Applies only if Energy Pack is
(Applies only if Energy Pack is
connected to the CPE305.)
connected to the CPE305.)
1
2
Proficy Machine Edition Logic
Developer Professional edition
5.6 or above
Proficy Machine Edition Logic
Developer Professional edition
5.6 or above
Ladder Logic, Structured Text, C, Ladder Logic, Structured Text, C,
Function Block Diagram
Function Block Diagram
1750 mA @ 3.3 VDC; 1200 mA
@ 5 VDC
1750 mA @ 3.3VDC;
1200 mA @ 5VDC
(Check Data sheet)
2
2
GE Intelligent Platforms Control Systems Solutions
1.7
PACSystems RX3i Mid-Range Controller
PACSystems Control
High Availability Redundant Controllers
High Availability CPU Redundancy family allows critical application or process to continue operating if a failure
occurs in any single component. A High Availability system uses two or more CPUs; an active unit that actively
controls the process, and one or more backup units that are synchronized with the active unit and can take over
the process should it becomes necessary.
An RX3i QuadPAC solution utilizes four CRU320QP controllers — one is a master controller and three are synchronized backup controllers. The QuadPAC solution features “Smart Redundancy,” a patent pending algorithm that
calculates the relative system availability in real time and identifies the most available controller as master. The
I/O racks may be grouped into either single (one I/O rack), redundant (two I/O racks), or triple redundant (three I/O
racks) rack configurations.
IC695CRU320
IC695CRU320QP
Product Name
RX3i Bumpless Redundant High Availability CPU
with two built-in serial ports.
(Requires IC695RMX128 Data Sync Module)
QuadPAC CPU for RX3i Bumpless Redundant High Availability
CPU with two built-in serial ports. (Requires IC695RMX128
Data Sync Module AND Quad Redundancy Solution Code)
Lifecycle Status
Active
Active
Redundant Controller
Quad System Redundant Controller
Universal Backplane Only. Uses PCI Bus.
Universal Backplane Only. Uses PCI Bus.
0.047
0.047
Module Type
Backplane Support
Boolean Execution Speed (ms/K)
64Meg bytes
64Meg bytes
Battery Backed Real Time Clock
Yes
Yes
I/O Discrete Points
32K
32K
User Logic Memory
32K
32K
Type of Memory Storage
SRAM, Flash
SRAM, Flash
Dynamic Data Back-up
Battery Backup only
Battery Backup only
1GHz
1GHz
One RS-485 port and one RS-232 port. Supports SNP, Serial I/O,
Modbus Slave and Modbus Master (Application code)
One RS-485 port and one RS-232 port. Supports SNP, Serial I/O,
Modbus Slave and Modbus Master (Application code)
8
8
Serial, Genius, CMX, Ethernet, PROFINET, PROFIBUS,
and DeviceNet
Serial, Genius, CMX, Ethernet, PROFINET, PROFIBUS,
and DeviceNet
Ethernet (Ethernet Global Data, Channels, Modbus TCP
Server and Client), PROFIBUS DP, DeviceNet
Ethernet (Ethernet Global Data, Channels, Modbus TCP
Server and Client), PROFIBUS DP, DeviceNet
Software Programming Support
Proficy Machine Edition Logic Developer
Professional edition 5.7 or above
Proficy Machine Edition Logic Developer
Professional edition 7.0 SIM 8 or above
Program Languages Supported
Ladder Logic, Structured Text, C, Function Block Diagram
Ladder Logic, Structured Text, C, Function Block Diagram
Redundancy Maximum amount
of data in for Syncronization
Up to 2 Mbytes beginning and end of scan
Up to 2 Mbytes beginning and end of scan
3.66 msec: 1K Discrete I/O, 125 Analog I/O and 1K Registers
3.87 msec: 2K Discrete I/O, 250 Analog I/O and 2K Registers
4.30 msec: 4K Discrete I/O, 500 Analog I/O and 4K Registers
5.16 msec: 8K Discrete I/O, 1K Analog I/O and 8K Registers
3.66 msec: 1K Discrete I/O, 125 Analog I/O and 1K Registers
3.87 msec: 2K Discrete I/O, 250 Analog I/O and 2K Registers
4.30 msec: 4K Discrete I/O, 500 Analog I/O and 4K Registers
5.16 msec: 8K Discrete I/O, 1K Analog I/O and 8K Registers
Maximum 1 logic scan, minimum 3.133 msec.
Maximum 1 logic scan, minimum 3.133 msec.
Automatic Each Scan
Automatic Each Scan
Redundant Synch LAN
Yes
Yes
Redundant I/O LAN
Yes
Yes
Internal Power Used
1750 mA @ 3.3 VDC; 1200 mA @ 5 VDC
1750 mA @ 3.3 VDC; 1200 mA @ 5 VDC
2
2
I/O Analog Points
Processor Speed
Built-in Communication Ports
Total Number of Racks
Communications Options
Field Busses/Device Networks
Redundancy Typical Base Sweep Time
(Reference Data Transfer List Impact)
Redundancy Switchover Time
CPU Scan Syncronization
Number of Slots Module
Occupies on Backplane
1.8
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
High Availability Data Synch
The Redundancy Memory Xchange (RMX) module operates as a dedicated link between
CPUs in an RX3i Hot Standby CPU (IC695CRU320) Redundancy system. The RMX modules
provide a path for transferring data between the two redundancy CPUs in the redundant
system. A complete communications path consists of one RMX in the primary unit, one RMX
in the secondary unit, and two high-speed fiber optic cables connecting them to each other.
One or two redundancy links are supported per high availability CPU.
IC695RMX128
Product Name
RX3i Control Memory Xchange Module for
Peer to Peer network. 128Megbytes of
user shared memory.
Lifecycle Status
Active
Module Type
High Availability Data Syncronization Link
Backplane Support
Universal Backplane Only. Uses PCI Bus.
Sync Link Speed
2.1 Gbits/s
Communications Data Rate
2.12Gbaud
Synchronzed Link Transfer Rate
43 Mbyte/s (4 byte packets) to
174 Mbyte/s (64 byte packets)
Maximum Data Syncronization
Up to 2 megabytes. Twice per Scan.
Bus Diagnostics
Redundant RMX Support
Maximum Distance Between
Redundant Controllers
Connector Type
Internal Power Used
Number of Slots Module
Occupies on Backplane
www.ge-ip.com
Network error detection.
Yes
300 meters
-Fiber optic LC type, conforms to IEC 61754-20
- Zirconium ceramic ferrule
-Insertion loss: 0.35 dB (maximum)
-Return loss: -30dB
660 mA @ +3.3 VDC 253 mA @ +5 VDC
1
GE Intelligent Platforms Control Systems Solutions
1.9
PACSystems RX3i Mid-Range Controller
PACSystems Control
Baseplates
RX3i baseplates are available in 7, 12 and 16 slot configurations to the meet the needs
of your application. The RX3i Universal baseplates support hot swap capability to reduce
downtime. Expansion bases are available in 5 and 10 slot versions to maximize flexibility.
IC695CHS007
IC695CHS012
IC695CHS016
IC694CHS398
IC693CHS399
IC694CHS392
IC693CHS393
Product Name
PACSystems RX3i
7 slot high speed
controller base
supports only
5 serial bus slots
supported.
Not expandable.
PACSystems RX3i
12 slot high speed
controller base
supports PCI
and serial bus
PACSystems RX3i
16 slot high speed
controller base
supports PCI
and serial bus
PACSystems RX3i
serial 5-slot
Expansion
Baseplate
(serial bus only)
PACSystems RX3i
serial 5-slot Remote
Baseplate
(serial bus only)
PACSystems RX3i
serial 10-slot
Expansion
Baseplate
(serial bus only)
PACSystems RX3i
serial 10-slot
Remote Baseplate
(serial bus only)
Lifecycle Status
Active
Active
Active
Active
Active
Active
Active
Universal Controller
and I/O Base
Universal
Controller and
I/O Base
Universal
Controller and
I/O Base
Standard I/O
Standard I/O
Standard I/O
Standard I/O
Supports both
PCI and High
Speed Serial
Supports both
PCI and High
Speed Serial.
Supports both
PCI and High Speed
Serial.
Supports High
Speed Serial Only.
No PCI support.
Supports High
Speed Serial Only.
No PCI support.
Supports High
Speed Serial Only.
No PCI support.
Supports High
Speed Serial Only.
No PCI support.
Yes
Yes
Yes
No
No
No
No
Controller Base
and Ethernet
Expansion Base.
No local
base expansion
Controller Base
and Ethernet
Expansion Base
Controller Base
and Ethernet
Expansion Base
Expansion
Expansion
Expansion
Expansion
N/A
N/A
N/A
Up to 50 feet
Up to 700 feet
Up to 50 feet
Up to 700 feet
7
12
16
5
5
10
10
Dimension
(W x H x D) in. (mm)
10.43 x 5.57 x 5.80
(265 x 141.5 x
147.32)
18.01 x 5.57 x 5.80
(457.5 x 141.5 x
147.32)
23.7 x 5.57 x 5.80
(601.98 x 141.5 x
147.32)
10.43 x 5.12 x 5.59
(245 x 130 x 142)
10.43 x 5.12 x 5.59
(245 x 130 x 142)
17.44 x 5.12 x 5.59
(443 x 130 x 142)
17.44 x 5.12 x 5.59
(443 x 130 x 142)
Internal Power Used
600 mA @ 3.3 VDC; 600 mA @ 3.3 VDC; 600 mA @ 3.3 VDC;
240 mA @ 5 VDC
240 mA @ 5 VDC
240 mA @ 5 VDC
170 mA @ 5 VDC
480 mA @ 5 VDC
150 mA @ 5 VDC
460 mA @ 5 VDC
Module Type
Backplane Support
Module Hot Swap Support
Baseplate Option
Distance
Number of Slots
1.10
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
Universal Bases Power Supplies
The RX3i power supply modules simply snap in just like I/O, and they work with any model
CPU. Each version provides auto-ranging so there is no need to set jumpers for different
incoming power levels, and they are current limiting so a direct short will shut the power
supply down to avoid damage to the hardware. Advanced diagnostics and built-in smart
switch fusing are among the other performance and safety features. The multipurpose
power supplies can be configured for incremental capacity or redundancy.
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Power Source
Redundant and Added
Capacity Support
Output Source
Number of Redundant
Power Supplies Supported
www.ge-ip.com
IC695PSA040
IC695PSD040
IC695PSA140
IC695PSD140
Power Supply, 120/240 VAC,
125 VDC (Can not be on the
same backplane with more
than one power supply)
Power Supply, 24 VDC
(Can not be on the same
backplane with more
than one power supply)
Multipurpose Power Supply,
120/240 VAC, 125 VDC.
Supports multiple multipurpose power supplies.
Multipurpose Power Supply,
24 VDC. Supports multiple
multipurpose power supplies.
Active
Active
Active
Active
Universal Base Power Supply
Universal Base Power Supply
Universal Base Power Supply
Universal Base Power Supply
Universal Backplane Only.
Uses PCI Bus.
Universal Backplane Only.
Uses PCI Bus.
Universal Backplane Only.
Uses PCI Bus.
Universal Backplane Only.
Uses PCI Bus.
2
1
2
1
100-240 VAC or 125 VDC
24 VDC
100-240 VAC or 125 VDC
24 VDC
No
No
Yes, Up to 4 Multipurpose
power supplies supported
on a Universal base
Yes, Up to 4 Multipurpose power
supplies supported
on a Universal base
40 watts total. 30 watts max
at 3.3 VDC; 30 watts max at 5
VDC; 40 watts at 24 VDC Relay,
no 24 VDC isolated available.
40 watts total. 30 watts max
at 3.3 VDC; 30 watts max at
5 VDC; 40 watts at 24 VDC
Relay, no 24 VDC
isolated available
40 watts total. 30 watts max at
3.3 VDC; 30 watts max at
5 VDC; 40 watts at 24 VDC
Relay, no 24 VDC
isolated available
40 watts total. 30 watts max
at 3.3 VDC; 30 watts max at
5 VDC; 40 watts at 24 VDC
Relay, no 24 VDC
isolated available.
N/A
N/A
Two Multipurpose Power
Supplies are supported on
the Universal Base configured
for redundancy
Two Multipurpose Power
Supplies are supported on
the Universal Base configured
for redundancy
GE Intelligent Platforms Control Systems Solutions
1.11
PACSystems RX3i Mid-Range Controller
PACSystems Control
Remote Base Power Supplies
The RX3i power supply modules simply snap in just like I/O, and they work with any model
CPU. Each version provides auto-ranging so there is no need to set jumpers for different
incoming power levels, and they are current limiting so a direct short will shut the power
supply down to avoid damage to the hardware. RX3i power supplies are tied into the
performance of the CPU for simplex, fail-safe, and fault tolerance. Advanced diagnostics
and built-in smart switch fusing are among the other performance and safety features.
IC694PWR321
IC694PWR330
IC694PWR331
IC693PWR332
Product Name
Power Supply,
120/240 VAC, 125 VDC
Power Supply,
120/240 VAC, 125 VDC
Power Supply,
24 VDC
Power Supply,
12 VDC
Lifecycle Status
Active
Active
Active
Active
Expansion Power Supply
Expansion Power Supply
Expansion Power Supply
Expansion Power Supply
Remote Bases Only
Remote Bases Only
Remote Bases Only
Remote Bases Only
Power Source
100-240 VAC or 125 VDC
100-240 VAC or 125 VDC
24 VDC
12 VDC
High Capacity
No
Yes
Yes
Yes
Output Source
30 watts total; 15 watts 5 VDC;
15 watts 24 VDC relay;
20 watts 24 VDC isolated
30 watts total; 30 watts 5 V;
15 watts 24 V relay;
20 watts 24 V isolated
30 watts total; 30 watts 5 V;
15 watts 24 V relay;
20 watts 24 V isolated
30 watts total; 30 watts 5 V;
15 watts 24 V relay;
20 watts 24 V isolated
Cable Length to Redundant
Power Supply Adapter
N/A
N/A
N/A
N/A
Redundant Power Supply
Adapter Rack Compatibility
N/A
N/A
N/A
N/A
24 VDC Output Current Capacity
0.8 A
0.8 A
0.8 A
0.8 A
Module Type
Backplane Support
1.12
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
Remote Base Power Supplies
The RX3i power supply modules simply snap in just like I/O, and they work with any model
CPU. Each version provides auto-ranging so there is no need to set jumpers for different
incoming power levels, and they are current limiting so a direct short will shut the power
supply down to avoid damage to the hardware. RX3i power supplies are tied into the
performance of the CPU for simplex, fail-safe, and fault tolerance. Advanced diagnostics
and built-in smart switch fusing are among the other performance and safety features.
IC693PWR328
Product Name
Power Supply,
48 VDC
Lifecycle Status
Active
Module Type
Backplane Support
Expansion Power Supply
Remote Bases Only
Power Source
48 VDC
High Capacity
No
Output Source
30 watts total; 15 watts 5 V;
15 watts 24 V relay;
20 watts 24 V isolated
Cable Length to Redundant
Power Supply Adapter
N/A
Redundant Power Supply
Adapter Rack Compatibility
N/A
24 VDC Output Current Capacity
0.8 A
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.13
PACSystems RX3i Mid-Range Controller
PACSystems Control
Discrete I/O Modules (Input)
Input modules provide the interface between the PLC and external input devices such as
proximity sensors, push buttons, switches, and BCD thumbwheels. Output modules provide
the interface between the PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. GE offers a variety of modules that support
different voltage ranges and types, current capacity, isolation and response time to
meet your application needs.
IC694ACC300
IC694MDL230
IC694MDL250
IC694MDL231
IC694MDL240
PACSystems RX3i DC
Voltage Input
Simulator,
8/16 Points
PACSystems RX3i AC
Voltage Input Module,
120 VAC Isolated,
8 Point Input
PACSystems RX3i AC
Voltage Input Module,
120 VAC Isolated,
16 Point Input
PACSystems RX3i AC
Voltage Input Module,
240 VAC Isolated,
8 Point Input
PACSystems RX3i AC
Voltage Input Module,
120 VAC,
16 Point Input
Active
Active
Active
Active
Active
Input Simulator
Discrete Input
Discrete Input
Discrete Input
Discrete Input
No Backplane
Restrictions
No Backplane
Restrictions
No Backplane
Restrictions
No Backplane
Restrictions
No Backplane
Restrictions
1
1
1
1
1
Input Voltage Range
N/A
0-132 VAC
0-132 VAC
0-264 VAC
0-132 VAC
Input Current (mA)
N/A
14.5
14.5
15
12
Number of Points
16
8
16
8
16
20 on/30 off
30 on/45 off
30 on/45 off
30 on/45 off
30 on/45 off
Trigger Voltage
N/A
74-132
74-132
148-264
74-132
Points per Common
16
1
1
1
16
N/A
N/A
N/A
N/A
N/A
Switches
Terminal Block
(20 screws), included
with module.
IC694TBBx32 or
IC694TBSx32.
Sold Separately.
Terminal Block
(20 screws), included
with module.
Terminal Block
(20 screws), included
with module.
120 mA @ 5 VDC
60 mA @ 5 VDC
60 mA @ 5 VDC
60 mA @ 5 VDC
90 mA @ 5 VDC
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Response Time (ms)
Diagnostic Supported
Connector Type
Internal Power Used
1.14
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
Discrete I/O Modules (Input)
Input modules provide the interface between the PLC and external input devices such as
proximity sensors, push buttons, switches, and BCD thumbwheels. Output modules provide
the interface between the PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. GE offers a variety of modules that support
different voltage ranges and types, current capacity, isolation and response time to
meet your application needs.
IC694MDL260
IC694MDL241
IC694MDL632
IC694MDL634
IC694MDL645
PACSystems RX3i AC
Voltage Input Module,
120 VAC,
32 Point Input
AC/DC Voltage Input
Module, 24 VAC/VDC
PACSystems RX3i DC
Voltage Input Module,
125 VDC Pos/Neg Logic,
8 Point Input
PACSystems RX3i DC
Voltage Input Module,
24 VDC Pos/Neg Logic,
8 Point Input
PACSystems RX3i DC Voltage
Input Module, 24 VDC
Pos/Neg Logic,
16 Point Input
Active
Active
Active
Active
Active
Module Type
Discrete Input
Discrete Input
Discrete Input
Discrete Input
Discrete Input
Backplane Support
No Backplane
Restrictions
No Backplane
Restrictions
No Backplane
Restrictions
No Backplane
Restrictions
No Backplane
Restrictions
1
1
1
1
1
0-132 VAC
0-30 VDC
0-150 VDC
0-30 VDC
0-30 VDC
Input Current (mA)
12
7
4.5
7
7
Number of Points
32
16
8
8
16
30 on/45 off
12 on/28 off
7 on/7 off
7 on/7 off
7 on/7 off
74-132
11.5-30
90-150
11.5-30
11.5-30
16
16
4
8
16
N/A
N/A
N/A
N/A
N/A
IC694TBBx32 or
IC694TBSx32.
Sold Separately.
Terminal Block
(20 screws), included
with module.
Terminal Block
(20 screws), included
with module.
Terminal Block
(20 screws), included
with module.
Terminal Block
(20 screws), included
with module.
90 mA @ 5 VDC
80 mA @ 5 VDC;
125 mA @ 24 VDC
40 mA @ 5 VDC
45 mA @ 5 VDC;
62 mA @ 24 VDC Isolated
Isolated
80 mA @ 5 VDC;
125 mA @ 24 VDC
Isolated
Product Name
Lifecycle Status
Number of Slots Module
Occupies on Backplane
Input Voltage Range
Response Time (ms)
Trigger Voltage
Points per Common
Diagnostic Supported
Connector Type
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.15
PACSystems RX3i Mid-Range Controller
PACSystems Control
Discrete I/O Modules (Input)
Input modules provide the interface between the PLC and external input devices such as
proximity sensors, push buttons, switches, and BCD thumbwheels. Output modules provide
the interface between the PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. GE offers a variety of modules that support
different voltage ranges and types, current capacity, isolation and response time to
meet your application needs
IC694MDL646
IC694MDL654
IC694MDL655
IC694MDL660
IC695MDL664
PACSystems RX3i DC
Voltage Input Module,
24 VDC Pos/Neg Logic,
FAST, 16 Point Input
PACSystems RX3i DC
Voltage Input Module,
5/12 VDC (TTL)
Pos/Neg Logic,
32 Point Input
PACSystems RX3i DC
Voltage Input Module,
24 VDC Pos/Neg Logic,
32 Point Input
PACSystems RX3i DC
Voltage Input Module,
24 VDC Pos/Neg Logic,
32 Point Input
PACSystems RX3i DC
Voltage Input Module,
24VDC Positive Logic,
Advanced Diagnostics,
16 Point Input
Active
Active
Active
Active
Active
Module Type
Discrete Input
Discrete Input
Discrete Input
Discrete Input
Discrete Input
Backplane Support
No Backplane
Restrictions
No Backplane
Restrictions
No Backplane
Restrictions
No Backplane
Restrictions
Universal PCI
Slot Only
1
1
1
1
1
0-30 VDC
0-15 VDC
0-30 VDC
0-30 VDC
0-30 VDC
Input Current (mA)
7
3.0 @ 5 V, 8.5 @ 12 V
7
7
12.2
Number of Points
16
32
32
32
16
1 on/1 off
1 on/1 off
2 on/2 off
0.5ms, 1.0ms, 2.0ms,
5ms, 10ms, 50ms and
100ms, selectable per
module. On and off.
0.5ms, 1.0ms, 2.0ms,
5ms, 10ms, 50ms and
100ms, selectable per
module. On and off.
11.5-30
4.2-15
11.5-30
11.5-30
0.5 × VIN VDC
16
8
8
8
8
N/A
N/A
N/A
N/A
Open Wire,
Short to DC Negative
Input Pulse Test
Short to DC Plus
Terminal Block (20 screws),
included with module.
Fujitsu Connector
Fujitsu Connector
Connector Type
IC694TBBx32 or
IC694TBSx32.
Sold Separately.
IC694TBB032 or
IC694TBS032
80 mA @ 5 VDC;
125 mA @ 24 VDC Isolated
5 VDC -195 mA @ 5 VDC;
12 VDC -440 mA @ 5 VDC
195 mA @ 5 VDC
300 mA @ 5 VDC
Internal Power Used
225 mA @ 5 VDC;
95 mA @ 3.3 VDC
Product Name
Lifecycle Status
Number of Slots Module
Occupies on Backplane
Input Voltage Range
Response Time (ms)
Trigger Voltage
Points per Common
Diagnostic Supported
1.16
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
Analog I/O Modules (Input)
GE offers easy-to-use analog modules and HART analog modules for control processes such
as flow, temperature and pressure.
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
IC694ALG232
IC694ALG233
IC695ALG600
PACSystems RX3i
Analog Input, Voltage, High Density
(16 Channel) 16 Bit with
advanced diagnostics
PACSystemsRX3i
Analog Input, Current, High Density
(16 Channel) 16 Bit with
advanced diagnostics
PACSystems RX3i Analog Input.
Configurable per channel for Current,
Voltage, RTD, Thermocouple and Resistive.
High Density (8 Channel) Requires High
Density Terminal Block (IC694TBB032 or
IC694TBS032). Cold Junction Compensation
are available for Thermocouple configurations (IC695ACC600 contains 2 CJCs)
Active
Active
Active
Analog Input
Analog Input
Universal Analog Input
No Backplane Restrictions
No Backplane Restrictions
Universal Backplane Only. Uses PCI Bus.
1
1
1
-10 V to +10 V, 0 to 10 V
0-20 mA, 4-20 mA,
4-20 mA Enhanced
Voltage: +50 mV, +150 mV, 0–5 V, 1–5 V,
0–10 V, +10 V; Current: 0–20 mA, 4–20 mA,
+20 mA; Thermocouple Inputs: B, C, E, J, K, N, R,
S, T; RTD Inputs: PT 385 / 3916, N 618 / 672, NiFe
518, CU 426: Resistance Inputs: 0 to 250 / 500 /
1000 / 2000 / 3000 / 4000 Ohms
N/A
N/A
N/A
No
No
Two Groups of Four
Range
HART Support
Channel-to-Channel Isolation
Number of Channels
Update Rate
Resolution
16 Single Ended, 8 Differential
16
8
Single Ended: 5 ms for all channels
Differential: 3 ms all channels
6 ms all channels
10ms per Channel; 4 Channels = 40ms (1KHz
filter) 127ms per Channel 4 Channels = 508ms
(8Hz filter) Channels that are disabled
are not scanned, shortening scan time.
16 bit; ±10 V, 0.3125 mV, 1 LSB;
0-10 V, 0.3125 mV, 1 LSB
16 bit; 0-20 mA, 0.625 @ 181A/bit; 4-20 mA,
0.5 @ 181A/bit; 4-20 mA
Enhanced, 0.5 @181A/bit
11 to 16 bits, depending on configured
range and A/D filter frequency
0.25% at 25ºC (77ºF)
0.25% at 25ºC (77ºF)
Calibrated Accuracy at 25°C.
Better than 0.1% of range (except
10 ohm CU RTD) Accuracy depends
on A/D filter, data format, input noise,
and ambient temperature.
500K Ohms (single-ended mode)
1 MegaOhms (differential mode)
250 ohms
Current 249 ohms ±1%
23 Hz (single-ended mode)
38 Hz (differential mode)
23 Hz
Configurable: 8Hz, 12Hz, 16Hz,
40Hz, 200Hz, 1000Hz
Accuracy
Input Impedance
Input Filter Response
Notch Filter
N/A
N/A
Yes
Diagnostics
Under Range/Over Range,
Positive/Negative Rate of Change, High,
High-High, Low, Low-Low
Under Range/Over Range, Open Wire,
Positive/Negative Rate of Change, High,
High-High, Low, Low-Low
Open Wire, Short Circuit,
Positive/Negative Rate of Change,
High, High-High, Low, Low-Low
112 mA (maximum) @ +5 VDC
120 mA @ +5 VDC
400 mA @ 5 V; 350 mA @ 3.3 V
110 mA (maximum) +24 VDC supply
connected to TB1 on IC695CHSxxx
65 mA @ 24 VDC
N/A
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
IC694TBBx32 or IC694TBSx32.
Sold Separately.
Internal Power Used
External Power Requirement
Connector Type
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.17
PACSystems RX3i Mid-Range Controller
PACSystems Control
Analog I/O Modules (Input)
GE offers easy-to-use analog modules and HART analog modules for control processes such
as flow, temperature and pressure.
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
IC695ALG608
IC695ALG616
IC695ALG628
PACSystems RX3i Analog Input.
Configurable per channel for Current
or Voltage. High Density (8 Channel)
Requires High Density Terminal Block
(IC694TBB032 or IC694TBS032).
PACSystems RX3i Analog Input.
Configurable per channel for Current
or Voltage. High Density (16 Channel)
Requires High Density Terminal Block
(IC694TBB032 or IC694TBS032).
PACSystems RX3i Analog Input
with HART Communications.
Configurable per channel for Current
or Voltage. High Density (8 Channel)
Requires High Density Terminal Block
(IC694TBB032 or IC694TBS032).
Active
Active
Active
Analog Input
Analog Input
Analog Input with HART Communications
Universal Backplane Only. Uses PCI Bus.
Universal Backplane Only. Uses PCI Bus.
Universal Backplane Only. Uses PCI Bus.
1
1
1
Current: 0 to 20 mA, 4 to 20 mA, ±20 mA;
Voltage: ±10 V, 0 to 10 V, ±5 V, 0 to 5 V, 1 to 5 V
Current: 0 to 20 mA, 4 to 20 mA, ±20 mA;
Voltage: ±10 V, 0 to 10 V, ±5 V, 0 to 5 V, 1 to 5 V
Current: 0 to 20 mA, 4 to 20 mA, ±20 mA;
Voltage: ±10 V, 0 to 10 V, ±5 V, 0 to 5 V, 1 to 5 V
N/A
N/A
Get HART Device Information (Function 1)
Simplified HART Pass-Thru Command (Function 2)
Enterprise HART Pass-Thru Command (Function 3)
One Group of Eight
One Group of Sixteen
One Group of Eight
Range
HART Support
Channel-to-Channel Isolation
Number of Channels
Update Rate
Resolution
Accuracy
Input Impedance
Input Filter Response
8
16
8
All 8 Channels at 5 msec @ 500Hz.
Performance is dependent on filtering.
All 16 Channels at 9 msec @ 500Hz.
Performance is dependent on filtering.
All 8 Channels at 5 msec @ 500Hz.
Performance is dependent on filtering
and HART enabled channels could add
6 to 8 seconds.
32-bit IEEE floating point or 16-bit integer
(in 32-bit field) input data format
32-bit IEEE floating point or 16-bit integer
(in 32-bit field) input data format
Selectable per channel
Calibrated Accuracy @ 13°C – 33°C with
8 Hz, 12 Hz and 16 Hz filter; 0 to 10 V,
±10 V input types: 10 mV0 to 5 V, 1 to 5 V,
±5 V input types: 5 mV0 to 20 mA,
4 to 20 mA, ±20 mA input types: 20 µA
Calibrated Accuracy @ 13°C – 33°C with
8 Hz, 12 Hz and 16 Hz filter; 0 to 10 V,
±10 V input types: 10 mV0 to 5 V, 1 to 5 V,
±5 V input types: 5 mV0 to 20 mA,
4 to 20 mA, ±20 mA input types: 20 µA
Calibrated Accuracy @ 13°C – 33°C
with 8 Hz, 12 Hz and 16 Hz filter;
0 to 10 V, ±10 V input types: 10 mV0 to
5 V, 1 to 5 V, ±5 V input types: 5 mV0 to 20 mA,
4 to 20 mA, ±20 mA input types: 20 µA
Current 249 ohms ±1%
Current 249 ohms ±1%
Current 249 ohms ±1%
Configurable: 8Hz, 12Hz, 16Hz,
40Hz, 200Hz, 500Hz
Configurable: 8Hz, 12Hz, 16Hz,
40Hz, 200Hz, 500Hz
Configurable: 8Hz, 12Hz, 16Hz,
40Hz, 200Hz, 500Hz
Notch Filter
Yes
Yes
Yes
Diagnostics
Open wire, short circuit, positive/negative rate
of change, High, High-High, Low, Low-Low
Open wire, short circuit, positive/negative rate
of change, High, High-High, Low, Low-Low
Open wire, short circuit, positive/negative rate
of change, High, High-High, Low, Low-Low
450 mA @ 5 V; 600 mA @ 3.3 V
450 mA @ 5 V; 600 mA @ 3.3 V
450 mA @ 5 V; 600 mA @ 3.3 V
N/A
N/A
N/A
IC694TBBx32, IC694TBSx32 or IC694TBC032
Sold Separately.
IC694TBBx32, IC694TBSx32 or IC694TBC032
Sold Separately.
IC694TBBx32 or IC694TBSx32.
Sold Separately.
Internal Power Used
External Power Requirement
Connector Type
1.18
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
Analog I/O Modules (Input)
GE offers easy-to-use analog modules and HART analog modules for control processes
such as flow, temperature and pressure.
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Range
HART Support
Channel-to-Channel Isolation
Number of Channels
Update Rate
IC695ALG626
IC695ALG106
IC695ALG112
PACSystems RX3i Analog Input
with HART Communications.
Configurable per channel for Current
or Voltage. High Density (16 Channel)
Requires High Density Terminal Block
(IC694TBB032 or IC694TBS032).
PACSystems RX3i Isolated Analog Input
Configurable per channel for Current
or Voltage. High Density
(6 Isolated Channels)
Requires High Density Terminal Block
(IC694TBB032 or IC694TBS032).
PACSystems RX3i Isolated Analog Input.
Configurable per channel for Current or
Voltage. High Density (12 Isolated Channels)
Requires High Density Terminal Block
(IC694TBB032 or IC694TBS032).
Active
Active
Active
Analog Input with HART Communications
Analog Input with Channel
to Channel Isolation
Analog Input with Channel
to Channel Isolation
Universal Backplane Only. Uses PCI Bus.
Universal Backplane Only. Uses PCI Bus.
Universal Backplane Only.
Uses PCI Bus.
1
1
1
Current: 0 to 20 mA, 4 to 20 mA, ±20 mA;
Voltage: ±10 V, 0 to 10 V, ±5 V, 0 to 5 V, 1 to 5 V
Current: 0 to 20 mA, 4 to 20 mA, ±20 mA;
Voltage: ±10 V, 0 to 10 V, ±5 V, 0 to 5 V, 1 to 5 V
Current: 0 to 20 mA, 4 to 20 mA, ±20 mA;
Voltage: ±10 V, 0 to 10 V, ±5 V, 0 to 5 V, 1 to 5 V
Get HART Device Information (Function 1)
Simplified HART Pass-Thru Command (Function 2)
Enterprise HART Pass-Thru Command (Function 3)
N/A
N/A
One Group of Sixteen
Yes (250 VAC continuous, 1500 VAC for 1
minute per channel)
Yes (250 VAC continuous, 1500 VAC
for 1 minute per channel)
16
6
12
All 16 Channels at 9 msec @ 500Hz.
Performance is dependent on filtering
and HART enabled channels could add
6 to 8 seconds.
1 ms for all channels.
1 ms for all channels
32-bit IEEE floating point or 16-bit integer
(in 32-bit field) input data format
32-bit IEEE floating point or 16-bit integer
(in 32-bit field) input data format
32-bit IEEE floating point or 16-bit integer
(in 32-bit field) input data format
Calibrated Accuracy @ 13°C – 33°C with 8 Hz,
12 Hz and 16 Hz filter; 0 to 10 V, ±10 V input :
types 10 mV0 to 5 V, 1 to 5 V, ±5 V input
types: 5 mV0 to 20 mA, 4 to 20 mA, ±20 mA
input types: 20 µA
±0.1% of span at 25°C, ±0.25%
of span over operating temperature range
±0.1% of span at 25ºC, ±.25% of span
over operating temperature range
Current 249 ohms ±1%
Current = 250 ohms ±1%,
Voltage >= 500k Ohms
Current = 250 ohms ±1%,
Voltage >= 500k Ohms
Configurable: 8Hz, 12Hz, 16Hz,
40Hz, 200Hz, 500Hz
Configurable low-pass: 8Hz, 12Hz, 16Hz,
40Hz, 250Hz, and 1000Hz
Configurable: 8Hz, 12Hz, 16Hz,
40Hz, 250Hz, and 1000Hz
Resolution
Accuracy
Input Impedance
Input Filter Response
Notch Filter
Yes
N/A
N/A
Diagnostics
Open wire, short circuit, positive/negative rate
of change, High, High-High, Low, Low-Low
Open wire, under range, over range,
positive/negative rate of change, High,
High-High, Low, Low-Low
Open wire, under range, over range,
positive/negative rate of change,
High, High-High, Low, Low-Low
450 mA @ 5 V; 600 mA @ 3.3 V
400 mA @ 5 V; 600 mA @ 3.3 V
800 mA @ 5 V; 600 mA @ 3.3 V
N/A
19.2 V to 30 VDC, Current required: 500 mA
19.2 V to 30 VDC,
Current required: 500 mA
IC694TBBx32 or IC694TBSx32.
Sold Separately.
IC694TBBx32 or IC694TBSx32.
Sold Separately.
IC694TBBx32 or IC694TBSx32.
Sold Separately.
Internal Power Used
External Power Requirement
Connector Type
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.19
PACSystems RX3i Mid-Range Controller
PACSystems Control
Analog I/O Modules (Input)
GE offers easy-to-use analog modules and HART analog modules for control processes such
as flow, temperature and pressure.
IC694ALG220
IC694ALG221
IC694ALG222
IC694ALG223
PACSystems RX3i Analog Input,
Voltage, 4 Channel
PACSystems RX3i
Analog Input, Current,
4 Channel
PACSystems RX3i
Analog Input,Voltage,
High Density (16 Channel)
PACSystems RX3i
Analog Input, Input,
Current, High Density
(16 Channel)
Active
Active
Active
Active
Analog Input
Analog Input
Analog Input
Analog Input
No Backplane Restrictions
No Backplane Restrictions
No Backplane Restrictions
No Backplane Restrictions
1
1
1
1
-10 V to +10 V
4-20 mA, 0-20 mA
-10 V to ±10 V, 0 to 10 V
0-20 mA, 4-20 mA
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
4
4
1
16
4 ms all channels
2 ms all channels
13 ms all channels
13 ms all Channels
12 bit; 5 mV/20 µA/bit
12 bit; 0-20 mA, 5 µA/bit;
4-20 mA, 4 µA/bit
12 bit; ±10 V, 5 mV/20 µA/bit;
0-10 V, 5 mV/20 µA/bit
12 bit; 0-20 mA, 5 µA/bit;
4-20 mA, 4 µA/bit; 4-20 mA
Enhanced, 5µA/bit
±10 mV/40µA at 25ºC (77ºF)
0.1 % full scale
0.25% at 25ºC (77ºF)
0.25% at 25ºC (77ºF)
>9 Megohms
250 ohms
250 ohms
250 ohms
17 Hz
325 Hz
200 Hz
200 Hz
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
27 mA @ 5 VDC; 98 mA @
24 VDC Isolated
25 mA @ 5 VDC; 100 mA @
24 VDC Isolated
112 mA @ 5 VDC; 4150 mA- User
Supplied 24 VDC
120 mA @ 5 VDC; 65 mA-User
Supplied 24 VDC
N/A
N/A
N/A
N/A
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Range
HART Support
Channel-to-Channel Isolation
Number of Channels
Update Rate
Resolution
Accuracy
Input Impedance
Input Filter Response
Notch Filter
Diagnositics
Internal Power Used
External Power Requirement
Connector Type
1.20
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
Analog I/O Modules (Input)
GE offers easy-to-use analog modules for control processes such as flow, temperature
and pressure.
HE693ADC410
HE693ADC420
Product Name
Isolated Analog Input Module,
Voltage, 1500 VAC, Isolation
Isolated Analog Input Module,
Current, 1500 VAC, Isolation
Lifecycle Status
Active
Active
Analog Input
Analog Input
No Backplane Restrictions
No Backplane Restrictions
1
1
±10 V
4-20 mA, ±20 mA
4
4
1500 VAC (RMS), ±2000 VDC
1500 VAC (RMS), ±2000 VDC
1 Megohm
100 ohms
Integrating, 18 bits
Integrating, 18 bits
13 bits plus sign
13 bits plus sign
I/O Required
4 %AI, 4 %AQ, 16 %I
8 %AI, 8 %AQ, 16 %I
Sample Rate
45 channels/second
45 channels/second
Analog Filtering
1 KHz, 3 pole Bessel
1 KHz, 3 pole Bessel
Digital Filtering
1-128 samples/update
1-128 samples/update
Maximum Error
.05% full scale
.05% full scale
1500 VAC (RMS), ±2000 VDC
1500 VAC (RMS), ±2000 VDC
Common Mode Rejection
>100 dB
>100 dB
Power Consumption at
Steady State, Maximum
.7 W @ 5 V, 1.2 W @ 24 V
.7 W @ 5 V, 1.2 W @ 24 V
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
N/A
N/A
140 mA @ 5 VDC; 50 mA @ 24 VDC Relay
140 mA @ 5 VDC; 50 mA @ 24 VDC Relay
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Range
Number of Channels
Channel-to-Channel Isolation
Input Impedance
A/D Type, Resolution
Useable Resolution
Common Mode Range
Connector Type
External Power Requirement
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.21
PACSystems RX3i Mid-Range Controller
PACSystems Control
Discrete I/O Modules (Output)
Input modules provide the interface between the PLC and external input devices such as
proximity sensors, push buttons, switches, and BCD thumbwheels. Output modules provide
the interface between the PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. GE offers a variety of modules that support
different voltage ranges and types, current capacity, isolation and response time to
meet your application needs.
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
IC694MDL310
IC694MDL330
IC694MDL340
IC694MDL390
PACSystems RX3i AC
Voltage Output Module,
120 VAC,
0.5A, 12 Point Output
PACSystems RX3i AC
Voltage Output Module,
120/240 VAC,
1A, 8 Point Output
PACSystems RX3i AC
Voltage Output Module,
120 VAC,
0.5A, 16 Point Output
PACSystems RX3i AC
Voltage Output Module,
120/240 VAC Isolated,
2A, 5 Point Output
Active
Active
Active
Active
Discrete Output
Discrete Output
Discrete Output
Discrete Output
No Backplane Restrictions
No Backplane Restrictions
No Backplane Restrictions
No Backplane Restrictions
1
1
1
1
85-132 VAC
85-264 VAC
85-132 VAC
85-264 VAC
Output Voltage Range
Number of Points
12
8
16
5
Isolation
N/A
N/A
N/A
Yes
N/A
N/A
N/A
N/A
0.5 A
1A
0.5 A
2A
1 on 1/2 cy off
1 on 1/2 cy off
1 on 1/2 cy off
1 on 1/2 cy off
Output Type
Triac
Triac
Triac
Triac
Polarity
N/A
N/A
N/A
N/A
6
4
4
1
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
210 mA @ 5 VDC
160 mA @ 5 VDC
315 mA @ 5 VDC
110 mA @ 5 VDC
Diagnostics
Load Current
per Point
Response Time (ms)
Points per Common
Connector Type
Internal Power Used
1.22
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
Discrete I/O Modules (Output)
Input modules provide the interface between the PLC and external input devices such as
proximity sensors, push buttons, switches, and BCD thumbwheels. Output modules provide
the interface between the PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. GE offers a variety of modules that support
different voltage ranges and types, current capacity, isolation and response time to
meet your application needs.
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
IC694MDL350
IC694MDL732
IC694MDL734
IC694MDL740
PACSystems RX3i AC
Voltage Output Module,
120/240 VAC Isolated,
2A, 16 Point Output
PACSystems RX3i DC
Voltage Output Module,
12/24 VDC Positive Logic,
0.5A, 8 Point Output
PACSystems RX3i DC
Voltage Output Module,
125 VDC Pos/Neg Logic,
6 Point Output
PACSystems RX3i DC
Voltage Output Module,
12/24 VDC Positive Logic,
0.5A, 16 Point Output
Active
Active
Active
Active
Discrete Output
Discrete Output
Discrete Output
Discrete Output
No Backplane Restrictions
No Backplane Restrictions
No Backplane Restrictions
No Backplane Restrictions
1
1
1
1
74-264 VAC
12-24 VDC
11-150 VDC
12-24 VDC
Output Voltage Range
Number of Points
16
8
6
16
Isolation
Yes
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Per Point 2A max. @ 30°C & 1A
max. @ 60°C (Linear derating)
0.5 A
1A
0.5 A
1 on 1/2 cy off
2 on/2 off
7 on/5 off
2 on/2 off
Output Type
Triac
Transistor
Transistor
Transistor
Polarity
N/A
Positive
Positive/Negative
Positive
1
8
1
8
IC694TBBx32 or IC694TBSx32.
Sold Separately.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
110 mA @ 5 VDC
50 mA @ 5 VDC
90 mA @ 5 VDC
110 mA @ 5 VDC
Diagnostics
Load Current
per Point
Response Time (ms)
Points per Common
Connector Type
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.23
PACSystems RX3i Mid-Range Controller
PACSystems Control
Discrete I/O Modules (Output)
Input modules provide the interface between the PLC and external input devices such as
proximity sensors, push buttons, switches, and BCD thumbwheels. Output modules provide
the interface between the PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. GE offers a variety of modules that support
different voltage ranges and types, current capacity, isolation and response time to
meet your application needs.
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
IC694MDL741
IC694MDL742
IC694MDL752
IC694MDL753
PACSystems RX3i DC
Voltage Output Module,
12/24 VDC Negative Logic,
0.5A, 16 Point Output
PACSystems RX3i DC
Voltage Output Module,
12/24 VDC Positive Logic ESCP,
1A, 16 Point Output
PACSystems RX3i DC
Voltage Output Module,
5/24 VDC (TTL) Negative Logic,
0.5A, 32 Point Output
PACSystems RX3i DC
Voltage Output Module,
12/24 VDC Positive Logic,
0.5A, 32 Point Output
Active
Active
Active
Active
Discrete Output
Discrete Output
Discrete Output
Discrete Output
No Backplane Restrictions
No Backplane Restrictions
No Backplane Restrictions
No Backplane Restrictions
1
1
1
1
12-24 VDC
12-24 VDC
5, 12-24 VDC
12-24 VDC
Output Voltage Range
Number of Points
16
16
32
32
Isolation
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.5 A
1A
0.5 A
0.5 A
2 on/2 off
2 on/2 off
0.5 on/0.5 off
0.5 on/0.5 off
Output Type
Transistor
Transistor
Transistor
Transistor
Polarity
Negative
Positive
Negative
Positive
8
8
8
8
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Fujitsu Connector
Fujitsu Connector
110 mA @ 5 VDC
130 mA @ 5 VDC
260 mA @ 5 VDC
260 mA @ 5 VDC
Diagnostics
Load Current
per Point
Response Time (ms)
Points per Common
Connector Type
Internal Power Used
1.24
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
Discrete I/O Modules (Output)
Input modules provide the interface between the PLC and external input devices such as
proximity sensors, push buttons, switches, and BCD thumbwheels. Output modules provide
the interface between the PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. GE offers a variety of modules that support
different voltage ranges and types, current capacity, isolation and response time to
meet your application needs.
IC694MDL758
IC694MDL754
IC695MDL765
IC694MDL930
Product Name
PACSystems RX3i DC Voltage
Output Module, 12/24 VDC
Positive Logic with ESCP (Self
Healing) per group, 0.5 A, 32
Point Output (Two groups of 16)
PACSystems RX3i DC
Voltage Output Module,
12/24 VDC Positive Logic
with ESCP (Self Healing),
0.75 A, 32 Point Output
RX3i DC Voltage Output
Module, 24/125 volt DC 2 A
Smart Digital Output
module, 16 Point Output
PACSystems RX3i AC/DC
Voltage Output Module,
Relay, N.O., 4 A Isolated,
8 Point Output
Lifecycle Status
Active
Active
Active
Active
Discrete Output
Discrete Output
Discrete Output
Discrete Output
No Backplane Restrictions
No Backplane Restrictions
Universal Backplane Only.
Uses PCI Bus.
No Backplane Restrictions
1
1
1
1
12-24 VDC
12-24 VDC
18 to 30 VDC
105 to 132 VDC
0 to 125 VDC,
5/24/125 VDC nominal 0
to 265 VAC (47 to 63 Hz),
120/240 VAC nominal
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Output Voltage Range
Number of Points
32
32
16
8
Isolation
N/A
N/A
N/A
Yes
Electronic Short Circuit
Detection Per 16 points
Short Circuit Detection
~>dc_dc?d[bTCTbc
~>eTacT\_TaPcdaT
~5PX[TSBfXcRW3TcTRcX^]
~>eTa[^PS3TcTRcX^]
and Shutdown
~=^[^PS3TcTRcX^]
N/A
0.50 A
0.75 A
2A
2A
0.5 on/0.5 off
0.5 on/0.5 off
1 msec maximum
15 on/15 off
Transistor
Transistor
Transistor
Relay
Positive
Positive
Positive
N/A
16
16
16
1
IC694TBBx32 or
IC694TBSx32.
Sold Separately.
IC694TBBx32 or
IC694TBSx32.
Sold Separately.
IC694TBBx32 or
IC694TBSx32.
Sold Separately.
Terminal Block (20 screws),
included with module.
250 mA @ 5 VDC
300 mA @ 5 VDC
540 mA @ 5.1 VDC;
152 mA @ 3.3 VDC
6 mA @ 5 VDC;
70 mA @ 24 VDC Relay
Diagnostics
Load Current
per Point
Response Time (ms)
Output Type
Polarity
Points per Common
Connector Type
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.25
PACSystems RX3i Mid-Range Controller
PACSystems Control
Discrete I/O Modules (Output)
Input modules provide the interface between the PLC and external input devices such as
proximity sensors, push buttons, switches, and BCD thumbwheels. Output modules provide
the interface between the PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. GE offers a variety of modules that support
different voltage ranges and types, current capacity, isolation and response time to
meet your application needs.
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Output Voltage Range
IC694MDL916
IC694MDL931
IC694MDL940
HE693RLY100
HE693RLY110
PACSystems RX3i AC/DC
Voltage Output Module,
Relay, N.O., 4 A Isolated,
16 Point Output
PACSystems RX3i AC/DC
Voltage Output Module,
Relay, N.C. and Form C,
8 A Isolated, 8 Point Output
PACSystems RX3i AC/DC
Voltage Output Module,
Relay, N.O., 2 A,
16 Point Output
DC/AC Voltage Relay
Output Module
High Current
DC/AC Voltage Relay
Output Module
High Current (fused)
Active
Active
Active
Active
Active
Discrete Output
Discrete Output
Discrete Output
Discrete Output
Discrete Output
No Backplane Restrictions
No Backplane Restrictions
No Backplane Restrictions
No Backplane Restrictions
No Backplane Restrictions
1
1
1
1
1
5 to 125 VDC
5/24/125 VDC nominal
5 to 250 VAC (47 to 63 Hz),
120/240 VAC nominal
0 to 125 VDC,
5/24/125 VDC nominal 0
to 265 VAC (47 to 63 Hz),
120/240 VAC nominal
0 to 125 VDC,
5/24/125 VDC nominal 0
to 265 VAC (47 to 63 Hz),
120/240 VAC nominal
12-120 VAC, 12-30 VDC
12-120 VAC, 12-30 VDC
Number of Points
16
8
16
8
8
Isolation
Yes
Yes
N/A
N/A
Yes
N/A
N/A
N/A
N/A
N/A
4A
8A
2A
8A
8A
10ms maximum
(At nominal voltage
excluding contact bounce)
15 on/15 off
15 on/15 off
11 on/11 off
11 on/11 off
Relay
Relay
Relay
Relay
Relay
N/A
N/A
N/A
N/A
N/A
1
1
4
N/A
1
IC694TBBx32 or
IC694TBSx32.
Sold Separately.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
300 mA @ 5 VDC from
backplane maximum
(all outputs ON)
6 mA @ 5 VDC;
110 mA @ 24 VDC Relay
7 mA @ 5 VDC;
135 mA @ 24 VDC Relay
180 mA @ 5 VDC;
200 mA @ 24 VDC Relay
180 mA @ 5 VDC;
200 mA @ 24 VDC Relay
Diagnostics
Load Current
per Point
Response Time (ms)
Output Type
Polarity
Points per Common
Connector Type
Internal Power Used
1.26
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
Analog I/O Modules (Output)
GE offers easy-to-use analog modules for control processes such as flow, temperature
and pressure.
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
IC694ALG392
IC695ALG704
PACSystems RX3i Analog Output,
Current/Voltage, 8 Channel
PACSystems RX3i Analog Output,
Current/Voltage, 4 Channel
Active
Active
Analog Output
Analog Output
No Backplane Restrictions
Universal Backplane Only.
Uses PCI Bus.
1
1
N/A
High and Low Alarm, Ramp Rate
Control Clamping, Overrange
and Underrange
Reverse polarity and undervoltage
on external power supply
N/A
0 V to +10 V, -10 V to +10 V,
0-20 mA, 4-20 mA
Current: 0 to 20 mA, 4 to 20 mA;
Voltage: ±10 V, 0 to 10 V
N/A
N/A
8
4
N/A
N/A
8 ms all channels
8 ms all channels
16 bit; 0.312 mV/bit
±10 V: 15.9 bits; 0 to 10 V: 14.9 bits;
0 to 20 mA: 15.9 bits; 4 to 20 mA: 15.6 bits
0-20 mA, 4-20 mA ±0.1% at 25ºC (77ºF);
0-10 V, -10F + 10 V ±0.25 at 25ºC (77ºF)
Accurate to within 0.15% of full scale
at 25°C. Accurate to within 0.30%
of full scale at 60°C
5 mA (2 K ohms)
Current -850ohm max @ Vuser = 20 V;
Voltage -2k ohm max load
(minimum resistance)
2000 pF, Inductance 1H
Current: 10uH max.; Voltage: 1uF max.
N/A
Voltage Range: 19.2 V to 30 V
Current required: 160 mA
Terminal Block (20 screws),
included with module.
IC694TBB032 or IC694TBS032.
Sold Separately.
110 mA @ 5 VDC;
315 mA -User Supplied 24 VDC
375 mA @ 3.3 V (internal)
160 mA @ 24 V (external)
Diagnostics
Protection
Range
HART Support
Number of Channels
Channel-to-Channel Isolation
Update Rate
Resolution
Accuracy
Maximum Output Load
Output Load Capacitance
External Power Requirement
Connector Type
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.27
PACSystems RX3i Mid-Range Controller
PACSystems Control
Analog I/O Modules (Output)
GE offers easy-to-use analog modules for control processes such as flow, temperature
and pressure.
IC695ALG708
IC695ALG728
Product Name
PACSystems RX3i Analog Output,
Current/Voltage, 8 Channel
PACSystems RX3i Analog Output
with HART Communications,
Current/Voltage, 8 Channel
Lifecycle Status
Active
Active
Analog Output
Analog Output with HART Communications
Universal Backplane Only.
Uses PCI Bus.
Universal Backplane Only.
Uses PCI Bus.
1
1
High and Low Alarm, Ramp Rate
Control Clamping, Overrange
and Underrange
High and Low Alarm, Ramp Rate Control,
Clamping, Overrange and Underrange
N/A
N/A
Current: 0 to 20 mA, 4 to 20 mA;
Voltage: ±10 V, 0 to 10 V
Current: 0 to 20 mA, 4 to 20 mA;
Voltage: ±10 V, 0 to 10 V
N/A
-Get HART Device Information (Function 1)
Simplified HART Pass-Thru Command (Function 2)
-Enterprise HART Pass-Thru Command (Function 3)
8
8
N/A
N/A
8 ms all channels
8 ms all channels and HART enabled
channels could add 6 to 8 seconds.
10 V: 15.9 bits; 0 to 10 V: 14.9 bits;
0 to 20 mA: 15.9 bits; 4 to 20 mA: 15.6 bits
±10 V: 15.9 bits; 0 to 10 V: 14.9 bits;
0 to 20 mA: 15.9 bits; 4 to 20 mA: 15.6 bits
Accurate to within 0.15% of full scale
at 25°C. Accurate to within 0.30%
of full scale at 60°C
Accurate to within 0.15% of full scale at 25°C.
Accurate to within 0.30% of full scale at 60°C
Current -850ohm max @ Vuser = 20 V;
Voltage -2k ohm max load
(minimum resistance)
Current -850ohm max @ Vuser = 20 V;
Voltage -2k ohm max load
(minimum resistance)
Current: 10uH max.; Voltage: 1uF max.
Current: 10uH max.;
Voltage: 1uF max.
External Power Requirement
Voltage Range: 19.2 V to 30 V
Current required: 315 mA
Voltage Range: 19.2 V to 30 V
Current required: 315 mA
Connector Type
IC694TBB032 or IC694TBS032.
Sold Separately
IC694TBB032 or IC694TBS032.
Sold Separately.
375 mA @ 3.3 V (internal)
315 mA @ 24 V (external)
375 mA @ 3.3 V (internal)
315 mA @ 24 V (external)
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Diagnostics
Protection
Range
HART Support
Number of Channels
Channel-to-Channel Isolation
Update Rate
Resolution
Accuracy
Maximum Output Load
Output Load Capacitance
Internal Power Used
1.28
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
Analog I/O Modules (Output)
GE offers easy-to-use analog modules for control processes such as flow, temperature
and pressure.
IC695ALG808
IC694ALG390
IC694ALG391
Product Name
PACSystems RX3i Isolated Analog Output,
Current/Voltage, 8 Isolated Channels
PACSystems RX3i Analog Output,
Voltage, 2 Channel
PACSystems RX3i Analog Output,
Current, 2 Channel
Lifecycle Status
Active
Active
Active
Analog Output with Channel to Channel Isolation
Analog Output
Analog Output
Universal Backplane
Only. Uses PCI Bus.
No Backplane Restrictions
No Backplane Restrictions
1
1
1
High and Low Alarm, Ramp Rate Control,
Clamping, Overrange and Underrange
N/A
N/A
N/A
N/A
N/A
Current: 0 to 20 mA, 4 to 20 mA;
Voltage: ±10 V, 0 to 10 V
-10 V to +10 V, 4-20 mA
1-5 V and 0-5 V, 0-20 mA,
4-20 mA
N/A
N/A
N/A
8
2
2
Yes (250 VAC continuous,
1500 VAC for 1 minute per channel)
N/A
N/A
8 ms all channels (1 msec per channel)
5 ms all channels
5 ms all channels
12 bit; 2.5 mV/bit
12 bit;0-20 mA, 5µA/bit
Resolution
±10 V @ 15.9 bits minimum
0 to 10 V @ 14.9 bits minimum
0 to 20 mA @ 15.9 bits minimum
4 to 20 mA @ 15.6 bits minimum
Accurate to within ±0.1% of span
at 25C, ± 0.25% of span over operating
temperature range
±5 mV at 25ºC (77ºF)
Accuracy
0-20 mA, ±8 µA at 25ºC (77ºF);
0-20 mA, 4-20 mA ±0.1%
at 25ºC (77ºF)
Current: 1350 ohm maximum resistance,
10uH max inductance
Voltage: 2k Ohm minimum resistance,
1uF max capacitance
5 mA (2 K ohms)
5 mA (2 K ohms)
Current: 10uH max.;
Voltage: 1uF max.
2000 pF
2000 pF, Inductance 1H
500 mA @ 24 VDC
N/A
N/A
IC694TBBx32 or IC694TBSx32
Sold Separately.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
450 mA @ 3.3 V Maximum,
all channels on
32 mA @ 5 VDC;
120 mA @ 24 VDC Isolated
30 mA @ 5 VDC;
215 mA 24 VDC Isolated
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Diagnostics
Protection
Range
HART Support
Number of Channels
Channel-to-Channel Isolation
Update Rate
Maximum Output Load
Output Load Capacitance
External Power Requirement
Connector Type
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.29
PACSystems RX3i Mid-Range Controller
PACSystems Control
Analog I/O Modules (Output)
GE offers easy-to-use analog modules for control processes such as flow, temperature
and pressure.
HE693DAC410
HE693DAC420
Product Name
Isolated Analog Output
Module, Voltage
Isolated Analog Output
Module, Current
Lifecycle Status
Active
Active
Analog Output
Analog Output
No Backplane Restrictions
No Backplane Restrictions
1
1
N/A
N/A
N/A
N/A
±10 V
4-20 mA or 0-20 mA
N/A
N/A
4
4
1500 VAC (RMS), ±2000 VDC
1500 VAC (RMS), ±2000 VDC
N/A
N/A
1.2 5 mV
2.0 µA (4-20 mA); 2.5 µA (±20 mA)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
2-32 VDC
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
500 mA @ 5 VDC;
150 mA @ 24 VDC Relay
150 mA @ 5 VDC;
110 mA @ 24 VDC Relay
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Diagnostics
Protection
Range
HART Support
Number of Channels
Channel-to-Channel Isolation
Update Rate
Resolution
Accuracy
Maximum Output Load
Output Load Capacitance
External Power Requirement
Connector Type
Internal Power Used
1.30
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
Analog Mixed I/O Modules (Input and Output)
The analog mixed modules (four in and two out) are available with or without advanced
diagnostics. The advanced diagnostics includes alarms, open wire, rate of change, over
range and under range. Additional features include 16 bit resolution, analog output clamp
limits and output ramp mode option.
IC694ALG542
IC694ALG442
Active
Active
Analog Combination 4 In and 2 Out with Advanced Diagnostics,
Output Clamp and Ramp Control
Analog Combination 4 In and 2 Out
No Backplane Restrictions
No Backplane Restrictions
1
1
0 V to +10 V, -10 V to +10 V, 0-20 mA, 4-20 mA per Channel
0 V to +10 V, -10 V to +10 V, 0-20 mA, 4-20 mA per Channel
N/A
N/A
4 in/2 out
4 in/2 out
2ms all channels
2ms all channels
Resolution
(Input)16 bit; 0 V to 10 V, 0.3125 mV/bit; -10 V to +10 V,
0.3125 mV/bit; 0-20 mA, 0.625 µA 4-20 mA 0.5 µA/bit (Output) 16 bit; 0
to 20 mA: 0.625 µA; 4 to 20 mA: 0.5 µA; –10 V to +10 V: 0.3125 mV;
0 to +10 V: 0.3125 mV
(Input)12 bit; 0 V to 10 V, 2.5 mV/bit; -10 V to +10 V, 5 mV/bit;
0-20 mA,4-20 mA 5&#0181A/bit (Output) 16 bit; 0.312 mV/bit;
4-20 mA 0.5 &#0181A/bit; 0-20 mA 0.625 &#0181A/bit
(Input) 0.25 % at 25&#0176C (77&#0176F) (Output)
0-20 mA, 4-20 mA ±0.1% at 25&#0176C (77&#0176F)
Accuracy
Current Input 0 to 20 mA ±0.25% of full scale @ 25°C (77°F); ±0.5% of
full scale over specified operating temperature range Current Input
4 to 20 mA ±0.25% of full scale @ 25°C (77°F); ±0.5% of full scale over
specified operating temperature range 4 to 20 mA Enhanced Mode
±0.25% of full scale @ 25°C (77°F); ±0.5% of full scale over specified
operating temperature range Current Output ±0.1% of full scale
@ 25°C (77°F), typical ±0.25% of full scale @ 25°C (77°F), maximum
±0.5% of full scale over operating temperature range (maximum)
Voltage Output ±0.25% of full scale @ 25°C (77°F), typical ±0.5% of full
scale @ 25°C (77°F), maximum ±1.0% of full scale
over operating temperature range (maximum)
Current mode - 250 ohms
Voltage mode - 800 K ohms
Current mode - 250 ohms
Voltage mode - 800 K ohms”
Current mode - 55 Hz Voltage mode - 55 Hz
Current mode - 38 Hz Voltage mode - 38 Hz
Voltage: 5 mA (2 K ohms)
Current Inductance:1 H (maximum)
Voltage: 5 mA (2 K ohms)
Current Inductance:1 H (maximum) “
Voltage:1 µF (maximum)
Current: 2000 pF (maximum)
Voltage:1 µF (maximum)
Current: 2000 pF (maximum)”
Under Range/Over Range, Open Wire, Short Circuit,
Positive/Negative Rate of Change,
High, High-High, Low, Low-Low
N/A
95 mA @ 5 VDC; 150 mA external 24 VDC Isolated
95 mA @ 5 VDC; 150 mA external 24 VDC Isolated
24VDC: Current: 5 µA/V (typical), 10 µA/V (maximum)
Voltage: 25 mV/V (typical), 50 mV/V (maximum)
24VDC: Current: 5 µA/V (typical), 10 µA/V (maximum)
Voltage: 25 mV/V (typical), 50 mV/V (maximum)
Terminal Block (20 screws), included with module.
Terminal Block (20 screws), included with module.
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Range
Channel-to-Channel Isolation
Number of Channels
Update Rate
Input Impedence
Input Filter Response
Maximum Output Load
Output Load Capacitance
Diagnostics
Internal Power Used
External Power Requirement
Connector Type
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.31
PACSystems RX3i Mid-Range Controller
PACSystems Control
Millivolt I/O Modules
The Millivolt Input Modules allow Millivolt level signals, such as bridged strain gages
(load cells) to be directly connected to the PLC without external signal processing
(transducers, transmitters, etc.) All analog and digital processing of the signal is
performed on the module.
IC695ALG600 Millivolt
IC695ALG306 Millivolt
Product Name
Universal Analog and configurable for Current, Voltage, RTD,
Thermocouple and Resistive. High Density (8 Channel) Requires
Cold Junction Compensation; are available for Thermocouple
configurations (IC695ACC600 contains 2 CJCs)
Isolated Thermocouple Input module provides six isolated
differential thermocouple input channels. Each channel can
be individually configured for inputs from: Thermocouple types: J,
K, T, E, R, S, B, N, or C and Voltage: ±150mV or ±50mV.
Lifecycle Status
Active
Active
Millivolt Input
Strain Gage Input
Universal Backplane Only. Uses PCI Bus.
Universal Backplane Only. Uses PCI Bus.
1
1
±150mV or ±50mV
±150mV or ±50mV
Open wire, Short Circuit, Positive/Negative Rate of Change,
High, High-High, Low, Low-Low
Open wire, Short Circuit, Positive/Negative Rate of Change,
High, High-High, Low, Low-Low
Two Groups of Four
250 VAC Continuous
1500 VAC 1 minute
2550 VDC 1 second
8
6
Notch Filter
Yes
From 2.3 Hz to 28 Hz per channel
Resolution
32-bit IEEE floating point or 16-bit integer (in 32-bit field)
input data format)
32-bit IEEE floating point or 16-bit integer (in 32-bit field)
input data format)
Accuracy
Calibrated Accuracy at 25°C. Better than 0.1% of range.
Accuracy depends on A/D filter, data format, input noise,
and ambient temperature.
±0.1% of voltage span at 25°C. ±0.25% of span
over temperature range.
>1M ohm
Voltage: >=500k ohm
N/A
N/A
A/D Conversion Type
Sigma Delta
Sigma Delta
(Assumes 2 ADC’s running in parallel, no CJC or lead resistance) 10ms
per Channel 4 Channels = 40ms (1KHz filter) 127ms per
Channel 4 Channels = 508ms (8Hz filter) Channels that are
disabled are not scanned, shortening scan time.
15 msec @ 28 Hz to 120 msec @ 2.3 Hz
A/D Conversion Time
Strain Gages Supported
Yes
Yes
Maximum Normal Voltage Input
N/A
N/A
±14.5 VDC continuous
N/A
IC694TBBx32, IC694TBSx32 or IC694TBC032. Sold Separately.
IC694TBBx32, IC694TBSx32 or IC694TBC032. Sold Separately.
400 mA @ 5 V; 350 mA @ 3.3 V
150 mA @ 5V; 400 mA @ 3.3V
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Range
Diagnostics
Channel-to-Channel Isolation
Number of Channels
Input Impedance
I/O Required
Maximum Voltage Input
Connector Type
Internal Power Used
1.32
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
Millivolt I/O Modules
The Millivolt Input Modules allow Millivolt level signals, such as bridged strain gages
(load cells) to be directly connected to the PLC without external signal processing
(transducers, transmitters, etc.) All analog and digital processing of the signal is
performed on the module.
IC695ALG312 Millivolt
HE693ADC409
Isolated Thermocouple Input module provides twelve isolated
differential thermocouple input channels. Each channel can
be individually configured for inputs from: Thermocouple types: J,
K, T, E, R, S, B, N, or C and Voltage: ±150mV or ±50mV.
Analog I/O Module, Millivolt Input
Product Name
Lifecycle Status
Active
Active
Strain Gage Input
Millivolt Input
Universal Backplane Only. Uses PCI Bus.
No Backplane Restrictions
1
1
±150mV or±50mV
±25 mV, ±50 mV and ±100 mV
Open wire, Short Circuit, Positive/Negative Rate of Change,
High, High-High, Low, Low-Low
N/A
250 VAC Continuous
1500 VAC 1 minute
2550 VDC 1 second
N/A
12
4
Notch Filter
From 2.3 Hz to 28 Hz per channel
N/A
Resolution
32-bit IEEE floating point or 16-bit integer
(in 32-bit field) input data format
3 µV, 6µV, 9µV (respectively)
±0.1% of voltage span at 25ºC
±0.25% of span over temperature range.
±0.5%
Voltage: >=500k ohm
>20 Mohms
N/A
4% AI
Sigma Delta
Integrating
15 msec @ 28 Hz to 120 msec @ 2.3 Hz
35 Channels/second
Strain Gages Supported
Yes
Bridged (load cells)
Maximum Normal Voltage Input
N/A
100 mV
Maximum Voltage Input
N/A
±35 V
IC694TBBx32, IC694TBSx32 or IC694TBC032. Sold Separately.
Terminal Block (20 screws), included with module.
300 mA @ 5 V; 400 mA @ 3.3 V
100 mA @ 5 VDC
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Range
Diagnostics
Channel-to-Channel Isolation
Number of Channels
Accuracy
Input Impedance
I/O Required
A/D Conversion Type
A/D Conversion Time
Connector Type
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.33
PACSystems RX3i Mid-Range Controller
PACSystems Control
RTD I/O Modules
The RTD Input Modules provide RTD inputs that allow the direct connection of 2 and
3-wire RTD temperature sensors without using external signal processing (transducers,
transmitters, etc.). All analog and digital processing of the RTD signal is performed on
the module.
IC695ALG600 RTD
IC695ALG508 RTD
HE693RTD600
Isolated RTD Input module (also
supports Resistive) provides eight isolated
differential Resistive or RTD input channels.
Each channel can be individually configured
for 2, 3, 4 wire RTD or Resistance.
RTD Input Module,
Low Resolution
Product Name
Universal Analog and configurable for
Current, Voltage, RTD, Thermocouple and
Resistive. High Density (8 Channel) Requires
Cold Junction Compensation; are available
for Thermocouple configurations
(IC695ACC600 contains 2 CJCs)
Lifecycle Status
Active
Active
Active
RTD Input
RTD (and Resistive) Input
Channel to Channel Isolation
RTD Input
Universal Backplane Only. Uses PCI Bus.
Universal Backplane Only. Uses PCI Bus.
No Backplane Restrictions
Number of Slots Module
Occupies on Backplane
1
1
1
Number of Channels
8
8
6
2 and 3 wire PT 385 / 3916,
N 618 / 672, NiFe 518, CU 426
2, 3 and 4 wire 50, 100, 200, 500,
and 1000 ohm Pt 385; 50, 100, 200, 500, and
1000 ohm Pt 391.6; 100, 200, 500, and 1000
ohm Ni 618; 120 ohm Ni 672; 604 ohm NiFe
518; 10, 50 and 100 ohm Cu 426
3-wire, Pt-100E, Pt-100C, Pt-100Z,
Pt-1000, Cu-10, Cu-50, PT-100, Cu-53,
Cu-100, Ni-120, TD5R, TD5R,
Pt-90 (MIL-7990)
Module Type
Backplane Support
RTD Types Supported
Diagnostics
Open wire, short circuit, positive/negative rate Open wire, short circuit, positive/negative rate
of change, High, High-High,
of change, High, High-High,
Low, Low-Low
Low, Low-Low
N/A
Two Groups of Four
250 VAC Continuous
1500 VAC 1 minute
2550 VDC 1 second
N/A
Notch Filter
Yes
N/A
N/A
Resolution
32-bit IEEE floating point or 16-bit integer
(in 32-bit field) input data format
32-bit IEEE floating point or 16-bit integer
(in 32-bit field) input data format
0.5ºC or 0.5ºF
Calibrated Accuracy at 25°C.
Typical is ±0.5%
±0.5ºC, typical
Accuracy
Calibrated Accuracy at 25°C.
Better than 0.1% of range. Accuracy
depends on A/D filter, data format,
input noise, and ambient temperature.
>1M ohm
N/A
>1000 Megohms
I/O Required
N/A
N/A
6 %AI
Fault Protection
N/A
N/A
Zener Diode Clamp
10ms per Channel; 4 Channels = 40ms (1KHz
filter)127ms per Channel * 4 Channels =
508ms (8Hz filter)Channels that are disabled
are not scanned, shortening scan time.
15 msec @ 28 Hz to 120 msec @ 2.3 Hz
50 Channels/second
Sigma Delta
Sigma Delta
18 bit, integrating
IC694TBBx32, IC694TBSx32 or IC694TBC032.
Sold Separately.
IC694TBBx32, IC694TBSx32 or IC694TBC032.
Sold Separately.
Terminal Block (20 screws),
included with module.
400 mA @ 5 V; 350 mA @ 3.3 V
150 mA @ 5 V; 300 mA @ 3.3 V
70 mA @ 5 VDC
Channel-to-Channel Isolation
Input Impedance
Update Time
A/D Conversion Type
Connector Type
Internal Power Used
1.34
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
RTD I/O Modules
The RTD Input Modules provide RTD inputs that allow the direct connection of 2 and
3-wire RTD temperature sensors without using external signal processing (transducers,
transmitters, etc.). All analog and digital processing of the RTD signal is performed on
the module.
HE693RTD601
HE693RTD660
RTD Input Module,
High Resolution
RTD Input Module,
Isolated
Active
Active
RTD Input
RTD Input
No Backplane Restrictions
No Backplane Restrictions
Number of Slots Module
Occupies on Backplane
1
1
Number of Channels
6
6
3-wire, Pt-100E, Pt-100C, Pt-100Z,
Pt-1000, Cu-10, Cu-50, PT-100, Cu-53,
Cu-100, Ni-120, TD5R,
TD5R, Pt-90 (MIL-7990)
3 wire, Pt-100E, Pt-100C, Ni-120,
Cu-10, Pt-1000,TD5R Si
N/A
N/A
N/A
5 VAC
N/A
None
0.125ºC , 0.1ºC, or 0.1ºF
0.05ºC, 0.05ºF, 0.1ºC, 0.1ºF, 0.5ºC or 0.5ºF
±0.5ºC, typical
±0.3ºC
>1000 Megohms
>1000 Megohms
6 %AI
6% AI, 6% AQ, 16% I
Zener Diode Clamp
Suppression Diode
50 Channels/second
50 Channels/second
18 bit, integrating
18 bit, integrating
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
70 mA @ 5 VDC
200 mA @ 5 VDC
Product Name
Lifecycle Status
Module Type
Backplane Support
RTD Types Supported
Diagnostics
Channel-to-Channel Isolation
Notch Filter
Resolution
Accuracy
Input Impedance
I/O Required
Fault Protection
Update Time
A/D Conversion Type
Connector Type
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.35
PACSystems RX3i Mid-Range Controller
PACSystems Control
Strain Gage I/O Modules
The Millivolt Input Modules allow Millivolt level signals, such as bridged strain gages
(load cells) to be directly connected to the PLC without external signal processing
(transducers, transmitters, etc.) All analog and digital processing of the signal is
performed on the module.
IC695ALG600 Strain Gage
IC695ALG306 Strain Gage
IC695ALG312 Strain Gage
Universal Analog and configurable for Current,
Voltage, RTD, Thermocouple and Resistive.
High Density (8 Channel) Requires Cold
Junction Compensation; are available
for Thermocouple configurations
(IC695ACC600 contains 2 CJCs)
Isolated Thermocouple Input module
provides six isolated differential
thermocouple input channels. Each
channel can be individually configured
for inputs from: Thermocouple types:
J, K, T, E, R, S, B, N, or C and Voltage:
±150mV or ±50mV.
Isolated Thermocouple Input module
provides twelve isolated differential
thermocouple input channels. Each
channel can be individually configured
for inputs from: Thermocouple types:
J, K, T, E, R, S, B, N, or C and Voltage:
±150mV or ±50mV.
Active
Active
Active
Strain Gage Input
Strain Gage Input
Strain Gage Input
Universal Backplane Only. Uses PCI Bus.
Universal Backplane Only. Uses PCI Bus.
Universal Backplane Only. Uses PCI Bus.
1
1
1
±150mV or ±50mV
±150mV or ±50mV
±150mV or ±50mV
Open wire, short circuit, positive/negative
rate of change, High, High-High,
Low, Low-Low
Open wire, short circuit, positive/negative rate
of change, High, High-High,
Low, Low-Low
Open wire, short circuit, positive/negative
rate of change, High, High-High,
Low, Low-Low
Two Groups of Four
250 VAC Continuous
1500 VAC 1 minute
2550 VDC 1 second
250 VAC Continuous
1500 VAC 1 minute
2550 VDC 1 second
8
6
12
Resolution
32-bit IEEE floating point or 16-bit integer
(in 32-bit field) input data format
32-bit IEEE floating point or 16-bit integer
(in 32-bit field) input data format
32-bit IEEE floating point or 16-bit integer
(in 32-bit field) input data format
Accuracy
Calibrated Accuracy at 25°C. Better than 0.1%
of range. Accuracy depends on A/D filter, data
format, input noise, and ambient temperature.
±0.1% of voltage span at 25°C.
±0.25% of span over
temperature range.
±0.1% of voltage span at 25°C.
±0.25% of span over
temperature range.
>1M ohm
Voltage: >=500k ohm
Voltage: >=500k ohm
N/A
N/A
N/A
A/D Conversion Type
Sigma Delta
Sigma Delta
Sigma Delta
15 msec @ 28 Hz to
120 msec @ 2.3 Hz
15 msec @ 28 Hz to
120 msec @ 2.3 Hz
A/D Conversion Time
(Assumes 2 ADC’s running in parallel, no CJC or
lead resistance) 10ms per Channel 4 Channels =
40ms (1KHz filter) 127ms per Channel 4 Channels
= 508ms (8Hz filter) Channels that are disabled
are not scanned, shortening scan time.
Strain Gages Supported
Yes
Yes
Yes
Maximum Normal
Voltage Input
N/A
N/A
N/A
±14.5 VDC continuous
N/A
N/A
IC694TBBx32, IC694TBSx32 or IC694TBC032.
Sold Separately.
IC694TBBx32, IC694TBSx32 or IC694TBC032.
Sold Separately.
IC694TBBx32, IC694TBSx32 or IC694TBC032.
Sold Separately.
400 mA @ 5 V; 350 mA @ 3.3 V
150 mA @ 5 V; 400 mA @ 3.3 V
300 mA @ 5 V; 400 mA @ 3.3 V
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Range
Diagnostics
Channel-to-Channel Isolation
Number of Channels
Input Impedance
I/O Required
Maximum Voltage Input
Connector Type
Internal Power Used
1.36
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
Strain Gage I/O Modules
The Millivolt Input Modules allow Millivolt level signals, such as bridged strain gages
(load cells) to be directly connected to the PLC without external signal processing
(transducers, transmitters, etc.) All analog and digital processing of the signal is
performed on the module.
IC695ALG412
HE693STG883
HE693STG884
Analog I/O Module,
Strain Gage
Analog I/O Module,
Strain Gage
Product Name
Isolated Thermocouple Input module
provides twelve isolated differential
thermocouple input channels. Each channel
can be individually configured for inputs from:
Thermocouple types: J, K, T, E, R, S, B, N, or C
and Voltage: ±150mV or ±50mV. Offers a 10 dB
improvement in noise rejection compared to
ALG312 thermocouple inputs.
Lifecycle Status
Active
Active
Active
Strain Gage Input
Strain Gage Input
Strain Gage Input
Universal Backplane Only. Uses PCI Bus.
No Backplane Restrictions
No Backplane Restrictions
1
1
1
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
±50mV
N/A
N/A
Open wire, Short Circuit, Positive/Negative
rate of Change, High, High-High,
Low, Low-Low
N/A
N/A
Channel to Channel Isolation.
250VAC Continuous; 1500VAC 1 minute;
2550VDC 1 second
N/A
N/A
12
8
8
Resolution
32-bit IEEE floating point or 16 bit integer
(in 32 bit field) input data format
0.6 µV, 0.8 µV, 0.9 µV (respectively)
0.8 µV, 1.6 µV, 3.2 µV (respectively)
± 0.1% of voltage sp+GC+GB59GD1+GC59163an
at 25 °C.
± 0.25% of span over temperature range.
±0.3%
±0.3%
Accuracy
Voltage: >=500k ohm
>1000 Mohms
>1000 Mohms
N/A
8% AI, 16% I, 8% AQ, 16% Q
8% AI, 16% I, 8% AQ, 16% Q
Range
Diagnostics
Channel-to-Channel Isolation
Number of Channels
Input Impedance
I/O Required
A/D Conversion Type
Sigma Delta
Integrating
Integrating
15 msec @ 28 Hz to
120 msec @ 2.3 Hz
35 Channels/second
35 Channels/second
Yes
Bridged (load cells)
Bridged (load cells)
100 mV
100 mV
A/D Conversion Time
Strain Gages Supported
Maximum Normal
Voltage Input
±35 V
±35 V
IC694TBBx32, IC694TBSx32 or IC694TBC032.
Sold Separately.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
425 mA @ 5 V; 400 mA @ 3.3 V
60 mA @ 5 VDC; 30 mA @ 24 VDC Relay
60 mA @ 5 VDC; 30 mA @ 24 VDC Relay
Maximum Voltage Input
Connector Type
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.37
PACSystems RX3i Mid-Range Controller
PACSystems Control
Temperature Control Modules
The Temperature Control Module (TCM), is a high performance control module providing
eight channels of thermocouple input and eight channels of control output in a single
RX3i module. Each channel can operate in closed or open loop mode relieving the PLC
of providing the temperature control functions. The module also supports Autotuning.
IC693TCM302
IC693TCM303
Product Name
PACSystems RX3i Temperature Control Module,
(8) T/C, (1) RTD and (8) 24 VDC Output
PACSystems RX3i Temperature Control Module,
Extended Range, (8) T/C, (1) RTD and (8) 24 VDC Output
Lifecycle Status
Mature
Mature
Temperature Control
Temperature Control
No Backplane Restrictions
No Backplane Restrictions
1
1
8 T/C In/ 8 DC Out
8 T/C In/ 8 DC Out
J=0-600°C
K=0-1050°C
L=0-600°C
J=0-450°C
K=0-600°C
L=0-450°C
Output Voltage Range
18 to 30 volts DC
18 to 30 volts DC
Load Current per Point
100 mA maximum sourcing
100 mA maximum sourcing
Open thermocouple and reverse connection
detection capability Detection and indication of
out-of-tolerance temperature readings
Open thermocouple and reverse connection
detection capability Detection and indication of
out-of-tolerance temperature readings
Two 20 pin connectors (screw type)
Two 20 pin connectors (screw type)
150 mA @ 5 VDC
150 mA @ 5 VDC
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Number of Channels
Range
Diagnostics
Connector Type
Internal Power Used
1.38
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
Thermocouple I/O Modules
The Thermocouple Input Modules allow thermocouple temperature sensors to be directly
connected to the PLC with external signal processing (transducers, transmitters, etc.).
The module performs all analog and digital processing of the thermocouple signal. The
enhanced thermocouple input modules add isolation or high-resolution. On these modules,
each channel can be configured for a specific type of sensor wire. An autodetect external
AD592 cold junction compensation feature is also available.
IC695ALG600 Thermocouple
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Range
Diagnostics
IC695ALG306
Universal Analog and configurable
Isolated Thermocouple Input
for Current, Voltage, RTD,
module provides six isolated
Thermocouple and Resistive. High
differential thermocouple input
Density (8 Channel) Requires Cold
channels. Each channel can be
Junction Compensation; are available individually configured for inputs
for Thermocouple configurations
from: Thermocouple types: J, K, T, E,
(IC695ACC600 contains 2 CJCs)
R, S, B, N, or C and Voltage: ±150mV
or ±50mV.
Active
Active
IC695ALG312
IC695ALG412
Isolated Thermocouple Input
module provides twelve isolated
differential thermocouple input
channels. Each channel can be
individually configured for inputs
from: Thermocouple types: J, K, T, E,
R, S, B, N, or C and Voltage: ±150mV
or ±50mV.
Isolated Thermocouple Input
module provides twelve isolated
differential thermocouple input
channels. Each channel can be
individually configured for inputs
from: Thermocouple types: J, K, T, E,
R, S, B, N, or C and Voltage: ±50mV.
The ALG412 offers a 10dB
improvement in noise rejection
compared to the ALG312
thermocouple input module.
Active
ACtive
Thermocouple Input
Thermocouple Input
Thermocouple Input
Thermocouple Input
Universal Backplane Only.
Uses PCI Bus.
Universal Backplane Only.
Uses PCI Bus.
Universal Backplane Only.
Uses PCI Bus.
Universal Backplane Only.
Uses PCI Bus.
1
1
1
1
B, C, E, J, K, N, R, S, T
J, K, T, E, R, S, B, N, or C
J, K, T, E, R, S, B, N, or C
J, K, T, E, R, S, B, N, or C
Open wire, Short Circuit, Positive/NegOpen wire, Short Circuit, Positive/
Open wire, Short Circuit, Positive/
Open wire, Short Circuit, Positive/
ative Rate of Change, High, High-High, Negative Rate of Change, High, High- Negative Rate of Change, High, High- Negative Rate of Change, High, HighLow, Low-Low
High, Low, Low-Low
High, Low, Low-Low
High, Low, Low-Low
Number of Channels
8
6
12
12
Channel-to-Channel
Isolation
Two Groups of Four
250 VAC Continuous 1500 VAC 1
minute 2550 VDC 1 second
2.3 Hz filter, 50/60Hz: 100 dB 4 Hz
filter, 50Hz: 100 dB 4.7 Hz filter,
60Hz: 100 dB
70 dB minimum
250 VAC Continuous 1500 VAC 1
minute 2550 VDC 1 second
2.3 Hz filter, 50/60Hz: 100 dB 4 Hz
filter, 50Hz: 100 dB 4.7 Hz filter,
60Hz: 100 dB
70 dB minimum
250 VAC Continuous 1500 VAC 1
minute 2550 VDC 1 second
All filters, 50/60 Hz: 110 dB
From 2.3 Hz to 28 Hz per channel
From 2.3 Hz to 28 Hz per channel
Common Mode Rejection
120dB minimum @ 50/60 Hz with 8 Hz
filter 110dB minimum @ 50/60 Hz with
12 Hz filter
Chanel to Channel
Crosstalk
Notch Filter
Resolution
Accuracy
Update Rate
I/O Required
A/D Conversion Type
A/D Conversion Time
Connector Type
Internal Power Used
www.ge-ip.com
Yes
32-bit IEEE floating point or 16-bit
32-bit IEEE floating point or 16-bit
32-bit IEEE floating point or 16-bit
integer (in 32-bit field) input
integer (in 32-bit field) input
integer (in 32-bit field) input
data format
data format
data format
Calibrated Accuracy at 25°C.
±0.1% of voltage span at 25°C.
±0.1% of voltage span at 25°C ±0.25%
Better than 0.1% of range. Accuracy
±0.25% of span over
of span over
depends on A/D filter, data format, input
temperature range.
temperature range.
noise, and ambient temperature.
10ms per Channel; 4 Channels =
10ms per Channel; 4 Channels =
10ms per Channel; 4 Channels =
40ms (1KHz filter)127ms per Channel * 40ms (1KHz filter)127ms per Channel 40ms (1KHz filter)127ms per Channel
4 Channels = 508ms (8Hz filter)
* 4 Channels = 508ms (8Hz filter)
* 4 Channels = 508ms (8Hz filter)
Channels that are disabled are not
Channels that are disabled are not
Channels that are disabled are not
scanned, shortening scan time.
scanned, shortening scan time.
scanned, shortening scan time.
N/A
N/A
N/A
70 dB minimum
From 2.3 Hz to 28 Hz per channel
32-bit IEEE floating point or 16-bit
integer (in 32-bit field) input
data format
±0.1% of voltage span at 25°C
±0.25% of span over
temperature range.
Configurable from 15 msec
to 120 msec.
N/A
Sigma Delta
Sigma Delta
Sigma Delta
Sigma Delta
(Assumes 2 ADC’s running in parallel,
no CJC or lead resistance) 10ms per
Channel 4 Channels = 40ms (1KHz filter)
127ms per Channel 4 Channels =
508ms (8Hz filter) Channels that
are disabled are not scanned,
shortening scan time.
IC694TB3x32, IC694TBSx32 or
IC694TBC032. Sold Separately.
400 mA @ 5 V; 350 mA @ 3.3 V
15 msec @ 28 Hz to
120 msec @ 2.3 Hz
15 msec @ 28 Hz to
120 msec @ 2.3 Hz
15 msec @ 28 Hz to
120 msec @ 2.3 Hz
IC694TB3x32, IC694TBSx32 or
IC694TBC032. Sold Separately.
225 mA @ 5V; 400 mA @ 3.3V
IC694TB3x32, IC694TBSx32 or
IC694TBC032. Sold Separately.
425mA @ 5V; 400 mA @ 3.3V
IC694TB3x32, IC694TBSx32 or
IC694TBC032. Sold Separately.
425mA @ 5V; 400 mA @ 3.3V
GE Intelligent Platforms Control Systems Solutions
1.39
PACSystems RX3i Mid-Range Controller
PACSystems Control
Thermocouple I/O Modules
The Thermocouple Input Modules allow thermocouple temperature sensors to be directly
connected to the PLC with external signal processing (transducers, transmitters, etc.).
The module performs all analog and digital processing of the thermocouple signal. The
enhanced thermocouple input modules add isolation or high-resolution. On these modules,
each channel can be configured for a specific type of sensor wire. An autodetect external
AD592 cold junction compensation feature is also available.
HE693THM166
HE693THM409
HE693THM449
Analog I/O Thermocouple
Input Module
Analog I/O Thermocouple
Input Module
Analog I/O Thermocouple
Input Module
Active
Active
Active
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Range
Thermocouple Input
Thermocouple Input
Thermocouple Input
No Backplane Restrictions
No Backplane Restrictions
No Backplane Restrictions
1
1
1
J, K, N, T, E, R, S, B, C, X
J, K, N, T, E, R, S,
J, K, N, T, E, R, S,
Yes
No
Yes
Diagnostics
Number of Channels
16
4
4
Channel-to-Channel
Isolation
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Common Mode Rejection
Channel to Channel
Crosstalk
Notch Filter
N/A
N/A
N/A
0.5°C or 0.5°F
0.5°C or 0.5°F
0.5°C or 0.5°F
±0.5°C, typical (J, K, N, T)
±0.5°C, typical (J, K, N, T)
±0.5°C, typical (J, K, N, T)
N/A
N/A
N/A
16% AI, 16% I
4% AI
4% AI, 16% I
Integrating
Integrating
Integrating
40 Channels/second
40 Channels/second
40 Channels/second
Terminal Block (20 screws), included with module.
Terminal Block (20 screws), included with module.
Terminal Block (20 screws), included with module.
80 mA @ 5 VDC; 30 mA @ 24 VDC Relay
80 mA @ 5 VDC; 60 mA @ 24 VDC Relay
80 mA @ 5 VDC; 60 mA @ 24 VDC Relay
Resolution
Accuracy
Update Rate
I/O Required
A/D Conversion Type
A/D Conversion Time
Connector Type
Internal Power Used
1.40
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
Thermocouple I/O Modules
The Thermocouple Input Modules allow thermocouple temperature sensors to be directly
connected to the PLC with external signal processing (transducers, transmitters, etc.).
The module performs all analog and digital processing of the thermocouple signal. The
enhanced thermocouple input modules add isolation or high-resolution. On these modules,
each channel can be configured for a specific type of sensor wire. An autodetect external
AD592 cold junction compensation feature is also available.
HE693THM809
HE693THM884
HE693THM888
HE693THM889
Analog I/O Thermocouple
Input Module
Analog I/O Thermocouple
Input Module (Enhanced)
Analog I/O Thermocouple
Input Module (Enhanced)
Analog I/O Thermocouple
Input Module
Active
Active
Active
Active
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Range
Thermocouple Input
Thermocouple Input
Thermocouple Input
Thermocouple Input
No Backplane Restrictions
No Backplane Restrictions
No Backplane Restrictions
No Backplane Restrictions
1
1
1
1
J, K, N, T, E, R, S
J, K, N, T, E, R, S, B, C
J, K, N, T, E, R, S, B, C
J, K, N, T, E, R, S
No
Yes
Yes
Yes
Diagnostics
Number of Channels
8
8
8
8
Channel-to-Channel
Isolation
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.5°C or 0.5°F
None
N/A
60 Hz
N/A
N/A
0.5°C or 0.5°F
±0.5°C, typical (J,K,N,T)
N/A
N/A
±0.5°C, typical (J,K,N,T)
N/A
N/A
N/A
N/A
8% AI, 16% I
Common Mode Rejection
Channel to Channel
Crosstalk
Notch Filter
Resolution
Accuracy
Update Rate
I/O Required
A/D Conversion Type
8% AI
8% AI, 8% AQ, 16% I
8% AI, 8% AQ, 16% I
Integrating
Integrating
Integrating
Integrating
40 Channels/second
N/A
N/A
40 Channels/second
Terminal Block (20 screws), included with module.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
80 mA @ 5 VDC;
60 mA @ 24 VDC Relay
100 mA @ 5 VDC;
60 mA @ 24 VDC Relay
100 mA @ 5 VDC;
60 mA @ 24 VDC Relay
80 mA @ 5 VDC;
60 mA @ 24 VDC Relay
A/D Conversion Time
Connector Type
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.41
PACSystems RX3i Mid-Range Controller
PACSystems Control
Resistive I/O Module
The Resistive module allows the user to easily connect to resistive loads without the need of
external devices.
IC695ALG600 Resistive
IC695ALG508 Resistive
Product Name
Universal Analog and configurable for Current, Voltage, RTD,
Thermocouple and Resistive. High Density (8 Channel) Requires
Cold Junction Compensation; are available for Thermocouple
configurations (IC695ACC600 contains 2 CJCs)
Isolated Resistive Input module (also supports RTD) provides
eight isolated differential Resistive or RTD input channels.
Each channel can be individually configured for 2, 3, 4
wire RTD or Resistance.
Lifecycle Status
Active
Active
Resistive Input
Resistive (and RTD) Input Channel to Channel Isolation
Universal Backplane Only. Uses PCI Bus.
Universal Backplane Only. Uses PCI Bus.
1
1
0 to 250 / 500 / 1000 / 2000 / 3000 / 4000 Ohms
250 / 500 / 1000 / 2000 / 3000 / 4000 Ohms
Open wire, short circuit, positive/negative rate of change, High,
High-High, Low, Low-Low
Open wire, short circuit, positive/negative rate of change, High,
High-High, Low, Low-Low
8
8
Two Groups of Four
250 VAC Continuous 1500 VAC 1 minute 2550 VDC 1 second
Notch Filter
Yes
N/A
Resolution
32-bit IEEE floating point or 16-bit integer
(in 32-bit field) input data format
32-bit IEEE floating point or 16-bit integer
(in 32-bit field) input data format
Calibrated Accuracy at 25ºC. Better than 0.1% of range.
Accuracy depends on A/D filter, data format, input noise, and
ambient temperature.
Calibrated Accuracy at 25ºC. Typical is ± 0.5%
Accuracy
>1M ohm
N/A
Input Filter Response
Configurable: 8Hz, 12Hz, 16Hz, 40Hz, 200Hz, 1000Hz
Configurable: 2.3Hz, 4Hz, 4.7Hz, 24Hz, 28Hz
A/D Conversion Type
Sigma Delta
Sigma Delta
15 msec @ 28 Hz to 120 msec @ 2.3 Hz
A/D Conversion Time
(Assumes 2 ADC’s running in parallel, no CJC or lead resistance)
10ms per Channel 4 Channels = 40ms (1KHz filter) 127ms per
Channel 4 Channels = 508ms (8Hz filter) Channels that are disabled are not scanned, shortening scan time.
±14.5 VDC continuous
N/A
IC694TBBx32, IC694TBSx32 or IC694TBC032. Sold Separately.
IC694TBBx32, IC694TBSx32 or IC694TBC032. Sold Separately.
400 mA @ 5 V; 350 mA @ 3.3 V
150 mA @ 5 V; 300 mA @ 3.3 V
Module Type
Backplane Support
Number of Slots Module Occupies
on Backplane
Range
Diagnostics
Number of Channels
Channel-to-Channel Isolation
Input Impedance
Maximum Voltage Input
Connector Type
Internal Power Used
1.42
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
Networks and Distributed I/O Systems
The RX3i features a variety of communications options for distributed control and/or I/O.
Choose from PROFINET Controller, Ethernet EGD, PROFIBUS-DP, Genius and DeviceNet.
These communication modules are easy to install and quick to configure.
IC695ETM001
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Protocol Support
Entity Type
IC695PNC001
PACSystems RX3i Ethernet
PROFINET Controller (PNC) module,
TCP/IP 10/100Mbits, two RJ-45 ports connects a PACSystems RX3i conwith built-in switch
troller to a high-speed PROFINET
local area network. It enables the
RX3i controller to communicate
with IO-Devices on the LAN.
IC695PNS001
IC695CMX128
PACSystems RX3i PROFINET
Scanner (PNS) module, connects
a remote node of 90-30 or RX3i
modules to a PROFINET
IO-Controller
RX3i Control Memory Xchange
Module for Peer to Peer network.
128Megbytes of user
shared memory.
Active
Active
Active
Active
Ethernet
PROFINET Controller
PROFINET Scanner
Reflective Memory
Universal Backplane Only.
Uses PCI Bus.
Universal Backplane Only.
Uses PCI Bus.
Universal Backplane Only.
Uses PCI Bus.
Universal Backplane Only.
Uses PCI Bus.
1
1
1
1
SRT, Ethernet Global Data (EGD),
Channels (Client and Server),
Modbus TCP (Client and Server)
Client/Server
PROFINET
PROFINET
None Required
Master
I/O Device (Scanner)
Deterministic Peer to Peer.
Programmable Interrupt support.
Two RJ-45 ports one MAC Address
Two RJ-45 and Two SFP Cages
(SFPs not included, available
separately). 5 MAC addresses.
10/100/1000Mbaud
Two RJ-45 and Two SFP Cages
(SFPs not included, available
separately). 5 MAC addresses.
10/100/1000Mbaud
Communication Ports
10/100Mbaud
Bus Speed
I/O Device Update Rate
Maximum I/O Memory
Network link speed of 2.1 Gigabits/
sec. Network transfer rate of 43
Mbyte/s (4 byte packets) to 174
Mbyte/s (64 byte packets)
N/A
Configurable: 1 ms to 512 ms
Configurable: 1 ms to 512 ms
N/A
128 Kbytes of combined input/output
memory per PROFINET Controller
Up to 4 PNC001 per CPU IO
64 IO-Devices per Network
255 IO-Devices across 4 PROFINET
controllers per CPU
256 PROFINET Slots per device
2048 Number of PROFINET
Submodules per CPU
100 meters for cooper
Up to 70,000 meters with Fiber
2880 bytes total: 1440 bytes of input
data, 1440 bytes of output data
1 PNS per rack
32 input status bits and
32 output control bits
100 meters for cooper
Up to 70,000 meters with Fiber
Multimode Fiber up to 300 meters
between nodes. 10Km when
HUB is used
Yes
Yes
Yes
Network error detection.
Network Dependent
64 Drops
256 Subslots
256
N/A
N/A
Supports number of modules
allowed per rack
Does not support LRE for
Series 90-30 expansion racks
N/A
N/A
System Maximum Limits
Network Dependent
Network Distance
Bus Diagnostics
Number of Drops Supported
Message Size
Two RJ-45
Connector Type
840 mA @ 3.3 VDC; 614 mA @ 5 VDC
Internal Power Used
www.ge-ip.com
Up to 128 Mbytes reflective memory
with parity. Dynamic packet sizes
of 4 to 64 bytes, automatically
controlled by the CMX module
Two RJ-45 and two optional SFP plug Two RJ-45 and two optional SFP plug Fiber optic LC type, conforms to IEC
connectors for copper or fiber (single connectors for copper or fiber (single 61754-20; Zirconium ceramic ferrule;
or multimode) connections
or multimode) connections
Insertion loss 0.35 dB (maximum);
Return loss -30 dB
3.3 V: 0.5 A with no SFP devices
installed 1.2 A maximum (two SFP
devices installed, 0.35 A per SFP
device) 5 V: 1.5 A maximum
3.3 V: 0.5 A with no SFP devices
installed 1.2 A maximum (two SFP
devices installed, 0.35 A per SFP
device) 5 V: 1.5 A maximum
660 mA @ +3.3 VDC 253 mA @ +5 VDC
GE Intelligent Platforms Control Systems Solutions
1.43
PACSystems RX3i Mid-Range Controller
PACSystems Control
Networks and Distributed I/O Systems
The RX3i features a variety of communications options for distributed control and/or I/O.
Choose from Ethernet EGD, PROFIBUS-DP, Genius and DeviceNet. These communication
modules are easy to install and quick to configure.
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
IC695PBM300
IC695PBS301
IC694BEM331
IC694DNM200
PACSystems RX3i PROFIBUS Master
Module, Supports DPV1 Class 1
and Class 2.
PACSystems RX3i PROFIBUS
Slave Module, Supports DPV1
Class 1 and Class 2.
PACSystems RX3i
Genius Bus Controller
PACSystems RX3i
DeviceNet Master Module
Active
Active
Active
Active
PROFIBUS Master
PROFIBUS Slave
Genius Bus Controller
DeviceNet Master
Universal Backplane Only.
Uses PCI Bus.
Universal Backplane Only.
Uses PCI Bus.
No Backplane Restrictions
CPU Rack Only
1
1
1
1
PROFIBUS DPV1
PROFIBUS DPV1
Genius
DeviceNet
Master
Slave
Master
Master
PROFIBUS DB-9 connector
PROFIBUS DB-9 connector
Screw Terminal
Screw Terminal
12Mbaud
12Mbaud
153.6Kbaud
500Kbaud
Baud Rate Dependent. Supports all
standard data rates (9.6 kBit/s, 19.2
kBit/s, 93.75 kBit/s, 187.5 kBit/s, 500
kBit/s, 1.5 MBit/s, 3 MBit/s, 6 MBit/s
and 12 MBit/s)
Baud Rate Dependent. Supports all
standard data rates (9.6 kBit/s, 19.2
kBit/s, 93.75 kBit/s, 187.5 kBit/s, 500
kBit/s, 1.5 MBit/s, 3 MBit/s, 6 MBit/s
and 12 MBit/s)
500Kbaud 100 meters to 125Kbaud
500 meters. Maximum length at
each baud rate also depends on
cable type.
Yes, Slave Status Bit Array Table,
Network Diagnostic Counters, DP Master
Diagnostic Counters, Firmware Module
Revision, Slave Diagnostic Address
Yes, Alarms
7500 feet (2286 meters) at 38.4
Kbaud; 4500 feet (1371 meters) at
76.8 Kbaud; 3500 feet (1066 meters)
at 153.6 Kbaud extended; 2000 feet
(609 meters) at 153.6 Kbaud standard.
Maximum length at each baud rate
also depends on cable type.
Yes
Up To 125
(Requires repeater every 25 nodes)
N/A
32
64
244 bytes of input and 244 bytes of
output for each slave. Not to exceed
3584 bytes input and 3584 bytes
outputs total for the system.
244 bytes of input and 244 bytes
of output
128 bytes
127 bytes
PROFIBUS Connector
PROFIBUS Connector
Screw Terminal
Screw Terminal
420 mA @ 5 VDC
420 mA @ 5 VDC
300 mA @ 5 VDC
300 mA @ 5 VDC
Protocol Support
Entity Type
Communication Ports
Bus Speed
I/O Device Update Rate
Maximum I/O Memory
System Maximum Limits
Network Distance
Bus Diagnostics
Number of Drops Supported
Message Size
Yes
Connector Type
Internal Power Used
1.44
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
Co-Processor and Serial Communications Modules
RX3i features a wide range of Specialty Modules to meet all of your application needs.
From temperature controls, high-speed counters, I/O processors, coprocessors, to PID
auto-tuning modules, these Specialty Modules are designed to meet the demand for
versatile industrial solutions.
IC695CMM002
IC695CMM004
IC695PRS015
HE693ASC900
Two Port Serial Module
Four Port Serial Module
Pressure Transducer Module
supporting Honeywell LG1237
Smart Sensors
Horner ASCII Basic Module
Active
Active
Active
Active
Serial Communications
2 Isolated Serial Ports
Serial Communications
4 Isolated Serial Ports
Serial Communications
Serial Communications
4 Isolated Serial Ports
ASCII Basic Co-Processor
Universal Backplane Only.
Uses PCI Bus
Universal Backplane Only.
Uses PCI Bus
Universal Backplane Only.
Uses PCI Bus.
No Backplane Restrictions
1
1
1
1
Serial Read/Write Modbus
Master/Slave DNP 3.0 Master/
Slave CCM Slave and
Custom Protocols
Serial Read/Write Modbus
Master/Slave DNP 3.0 Master/
Slave CCM Slave and
Custom Protocols
Pressure Transducer Honeywell
LG1237 Smart Pressure
Transducer sensors
(Up to 15 sensors)
N/A
None required. Communications
set up in Proficy Machine Edition
None required. Communication
set up in Proficy Machine Edition
FLASH
FLASH
FLASH
EEPROM
(2) Isolated RS-232 or RS-485/422
(4) Isolated RS-232 or RS-485/422
(1) RS-485
RS-232, RS-232/485
Selectable Baud Rates: 1200,
2400, 4800, 9600, 19.2K, 38.4K,
57.6K, 115.2K
Selectable Baud Rates: 1200,
2400, 4800, 9600, 19.2K, 38.4K,
57.6K, 115.2K
375K baud
N/A
Network Data Rate
Internal Power Used
0.7 Amps maximum @ 3.3 VDC
0.115 Amps maximum @ 5 VDC
0.7 Amps maximum @ 3.3 VDC
0.150 Amps maximum @ 5 VDC
0.7 Amps maximum @ 3.3 VDC
0.115 Amps maximum @ 5.0 VDC
375 mA @ 5 VDC
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Protocols Supported
Programming Languages
Program Storage
Communication Ports
www.ge-ip.com
BASIC
GE Intelligent Platforms Control Systems Solutions
1.45
PACSystems RX3i Mid-Range Controller
PACSystems Control
Motion Control (High Speed Counting)
The High Speed Counters can be used for a wide range of applications. The following types are supported.
Type A - Up or Down-Independent Pulse-4 counters
Type B - Both Directions-A QUAD B Encoder Inputs-2 Counters
Type C - Difference Between 2 changing values-A QUAD B Encoder Inputs -1 Counter
Type D - provides homing capability with count inputs and a Home Marker input. In A quad B mode, the counter detects quadrature errors
Type E - Pre-defined Counter Type that occupies two of the module’s internal counters, primarily a down counter, but can handle up
counts to account for A quad B jitter
Type E counter counts down to zero, it uses a second counter block to turn on a dedicated output for a configurable time. Type E can be
set up for sequenced strobing, which links all four strobes on so that they are all triggered by strobe input 1
Type Z - Two regular Clock inputs, a software controlled Preload and a special Clock Input Z. The Z input triggers a store of the
Accumulator value to the Strobe 1 register. After the store, the counter can optionally reset the Accumulator to 0. It can then either restart
immediately or after wait until the Clock Input Z is no longer set User-Defined Counter Type - Create a customized counter type by selecting High-Speed Counter features that are suited to the application. This counter type provides a Clear input that can be used to immediately reset the Accumulator to the starting value.
Product Name
Lifecycle Status
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Input/Output Type
Off State Leakage Current
Output Protection
IC694APU300
IC695HSC304
IC695HSC308
IC694APU305
PACSystems RX3i
High Speed Counter
PACSystems RX3i
High Speed Counter
PACSystems RX3i
High Speed Counter
PACSystems RX3i
I/O Processor Module
Active
Active
High Speed Counter (*Enhanced
High Speed I/O Processing
Mode support: 1Mhz input frequency, (4 counters) Module supports High
expanded filtering, single ended,
Speed Counting, PLS (Programmable
differential encoders, 32 bit counters,
Limit Switch), Camming, Input
Z counter and windowing)
Interrupts and Pulse Width Timing
No Backplane Restrictions
Universal Backplane Only.
Uses PCI Bus.
Active
Active
High Speed I/O Processing
(8 counters) Module supports High
Speed Counting, PLS (Programmable
Limit Switch), Camming, Input
Interrupts and Pulse Width Timing
Universal Backplane Only.
Uses PCI Bus.
I/O Processor Module
No Backplane Restrictions
1
1
1
1
Positive Logic
Positive Logic
Positive Logic
N/A
200 µA
200 µA
10 µA per point
3 Amp Fuse for all points, Enhanced
Module will have ESCP protection
Type A, Type B, and Type C
Enhanced Mode Type Z
1.5 A maximum per channel, 10.5 A
1.5 A maximum per channel, 10.5 A
maximum per module
maximum per module
Type A, Type B, Type C, Type D, Type E, Type A, Type B, Type C, Type D, Type E,
Type Z and User-Defined Counter
Type Z and User-Defined Counter
10 µA per point
5 A Fuse for all points
CPU Interrupt Support
No
Yes
Yes
Gray Code Encoder or A Quad B
Encoder every 500 microseconds
N/A
PLS and Camming Support
No
Yes
Yes
N/A
Counter Operation
Input Filters (Selectable)
Count Rate
Counter Range
Selectable On/Off
Output Presets
Counters per Timebase
Strobe Register
Local Fast Inputs
Local Fast Outputs
Connector Type
Internal Power Used
1.46
High Frequency Filter - 2.5 µs;
30 Hz, 5 KHz, 50 KHz, 500 KHz, 5 MHz 30 Hz, 5 KHz, 50 KHz, 500 KHz, 5 MHz
Low Frequency Filter - 12.5 ms;
*Enhancement Mode: 5 ms, 500 µs,
10 µs and no filter
High Frequency - 80 kHz;
High Frequency 1.5 MHz
High Frequency 1.5 MHz
Low Frequency - 20 Hz;
(internal 2 MHz oscillator)
(internal 2 MHz oscillator)
*Enhanced Mode Up to 1MHz with
2MHz internal Oscillator
-2,147,483,648 to 2,147,483,648
-2,147,483,648 to 2,147,483,648
-65,535 to 65,535 ; *Enhanced Mode
-2,147,483,648 to 2,147,483,647 with
roll over detection
Each Counter has 4 present points,
Each Counter has 4 present points,
Each Counter has 2 present points,
On and Off
On and Off
On and Off; *Enhanced Mode up to 4
configurable outputs
Each counter stores the number
A Timebase from 100 nanoseconds
A Timebase from 100 nanoseconds
of counts that have occurred in a
to 429,496 milliseconds can be
to 429,496 milliseconds can be
specified time. A timebase value
selected for each counter.
selected for each counter.
measurement from 1 ms to 65535
ms is configurable.
Each counter has one or more strobe Each counter has one or more strobe Each counter has one or more strobe
registers that capture the current
registers that capture the current
registers that capture the current
accumulator value when a strobe
accumulator value when a strobe
accumulator value when a strobe
input transition in the direction
input transition in the direction
input transition in the direction
selected during the last
selected during the last
selected during the last
configuration of the module.
configuration of the module.
configuration of the module.
(12) 5 VDC or 10 to 30 VDC
(8 inputs) 5 VDC nominal: 4.7 VDC
(16 inputs) 5 VDC nominal: 4.7 VDC
to 5.5 VDC 12 to 24 VDC nominal:
to 5.5 VDC 12 to 24 VDC nominal:
10 VDC to 26.4 VDC Inputs are
10 VDC to 26.4 VDC Inputs are
mapped to any counter or to the
mapped to any counter or to the
controller as interrupts.
controller as interrupts.
(7 outputs) 4.7 to 40 VDC 1.5 A
(4) 10 to 30 VDC @ 500 mA maximum;
(14 outputs) 4.7 to 40 VDC 1.5 A
maximum per channel, 10.5 A
*Enhanced Mode: 1.5 A with ESCP
maximum per channel, 10.5 A
maximum per module Outputs can
4.75 to 6 VDC @ 20 mA maximum
maximum per module Outputs can
be used by the counters or as
be used by the counters or as
standard outputs from the controller. standard outputs from the controller.
Terminal Block (20 screws),
IC694TBBx32 or IC694TBSx32.
IC694TBBx32 or IC694TBSx32.
included with module.
Sold Separately.
Sold Separately.
250 mA @ 5 VDC
64 mA maximum @ 5 V;
94 mA maximum @ 5 V;
457 mA maximum @ 3.3 V
561 mA maximum @ 3.3 V
GE Intelligent Platforms Control Systems Solutions
N/A
30 kHz (Absolute Encoder) 200 kHz
(A Quad B Encoder)
N/A
N/A
N/A
N/A
(12) 8.0 VDC (non-VTTL),
1.5 VDC (TTL)
Continuous Output Current
(10°V30 VDC supply) 1.0 A
(each output 1-V4) 0.5 A
(each output 5-V8)
Terminal Block (20 screws),
included with module.
360 mA @ 5 VDC
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
PACMotion Servo Control
The PACMotion controller is a versatile servo motion controller that combines the benefits
of a highly integrated motion and machine logic solution with the performance, flexibility
and scalability required for advanced machine automation. PACMotion is designed to
deliver unsurpassed machine productivity required for today’s high-speed machines and
lean manufacturing environments. The 4-axis servo motion controller is built on a high
performance hardware platform, with a new enhanced motion engine, operating system,
and open standard integrated programming paradigm. Add to that world-class reliability
of FANUC servos and you have a motion system designed to give you the best productivity
and accuracy possible. Please see GE Intelligent Platforms Motion Solutions Catalog
GFA-483 for more information about motion offerings.
IC695PMM335
Product Name
PACMotion Module
Lifecycle Status
Active
Module Type
Backplane Support
Number of Slots Module Occupies on
Backplane
Motion Path Planning
Servo Motion
Universal Backplane Only. Uses PCI Bus.
1
1 ms, Consistent update regardless of the number of axes in the system
Position Loop Update Rate
500 µs, All axes in the RX3i rack are updated simultaneously
Velocity Loop Update Rate
125 µs, All axes in the RX3i rack are updated simultaneously
Torque Loop Update Rate
62.5 µs, All axes in the RX3i rack are updated simultaneously
Controlled Axes/Module
Master Axes/Module
Servo Command Interface
Fiber Terminal Block Cable Length
Maximum Axes per RX3i
Position Resolution
4 ßi, ßHVi or aHVi series servos are supported via a fiber optic interface
1, Can be a virtual time-based or incremental encoder master
Fiber Optic 50 Mb/s FANUC Serial Servo Bus (FSSB)
Max. 100 meters between nodes 400 meters maximum for a 4 axis system
DC Power Supplies: 40 + 10 master axes
(Requires 16 slot backplane, CPU and 4 DC power supplies)
AC Power Supplies: 32 + 8 master axes
(Requires 16 slot backplane, CPU and 3 AC power supplies)
aHVi Series 1,048,576 counts/rev, ßi and ßHVi Series 65,536 or 131,072 counts/rev.
ß2i and larger motors support the higher resolution.
Feedback Type
Incremental/Absolute Serial Encoder.
Optional battery backup required for absolute feedback mode.
Faceplate I/O
24V General Purpose Inputs: 4 optically isolated; source/sink
24V High-Speed Inputs: 2 optically isolated; source/sink Open circuit detection;
can be used to connect a quadrature master encoder (500 kHz max)
24V General Purpose Inputs/Outputs: 2 optically isolated; source/sink 125 mA
maximum output current each “Connecto” Plug-on Screw Terminal
Floating Point Support
Module Hot Insertion/Removal
Cam Profiles per Module
Synch/Delayed Start
High Speed Position Capture
Connector Type
Internal Power Used
www.ge-ip.com
Yes, Double precision IEEE 754.
Yes
256 at one time. Up to 2048 profiles can be stored
in the RX3i file system for use by any module.
Up to 8 axes Axes can be on any module and
are synchronized over the backplane.
±2 Inputs per axis: ±1 count = 10 µs jitter
Plug-on Screw Terminal and Fiber
5 VDC 0.45A @ 5 VDC; 1.1A & 3.3 VDC
GE Intelligent Platforms Control Systems Solutions
1.47
PACSystems RX3i Mid-Range Controller
PACSystems Control
PACMotion I/O Fiber Terminal Block
The optional Fiber Terminal Block enables PACMotion controller to connect remote I/O over a
fiber cable. The Fiber Terminal Block is DIN-rail mounted and can be up to 100 meters away
from the PACMotion module. The module is configurable per point for 5 VDC, 24 VDC and
analog I/O. The Fiber Terminal Block provides a unique ID that prevents connection to wrong
PACMotion modules. The module supports up to 5 incremental encoders without marker or 4
encoders with marker pulse.
IC695FTB001
Product Name
PACMotion I/O Fiber Terminal Block
Lifecycle Status
Active
Module Type
I/O Terminal Block for PACMotion
Mounting/Dimensions
35 mm DIN-rail
(5.56 W x 4.94 H x 2.46 D inches;
141.2 W x 125.5 H x 62.5 D mm)
Interface to PACMotion Module
Power Requirements
24 V Outputs (differential)
24 V General Purpose Inputs
5 V Outputs (differential)
Fiber Optic Cable.
Maximum cable length is 100 meters;
Interface uses a unique ID for each
PMM/FTB pair to prevent cross-connection.
19.2 VDC —28.8 VDC; 0.45 Amps @ 24 V
Eight optically isolated; source;
open load & short detection.
2 groups of 4; 0.5 A max. per point;
4 A max. per group
Sixteen optically isolated;
source/sink 4 groups of 4
Four RS422 Line Driver with
short circuit protection; 48 mA max.
5 V Inputs (differential/single-ended)
Six RS422 / RS485 Line Receiver
with fault detection
5 V Inputs (differential)
Six RS422 / RS485 Line Receiver
with fault detection
Analog Inputs
Two, ±10V differential 14 bit resolution
Analog Outputs
Two, ±10V differential 14 bit resolution
24 V Power Output
Reverse polarity protected
by replaceable fuse
5 V Power Output
0.5 amp max. electronic overload protected
Quad Encoder Open
Circuit Detection
Yes
I/O Function Assignment
Configurable I/O functions are assigned
during module hardware configuration
Terminal Header Options
IC694TBxx32
1.48
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
Motion Control (Servo Control)
Motion control integrated into the RX3i fosters high performance point-to-point
applications. GE Motion Control modules can be flexibly applied to a variety of digital,
analog, and stepper motion applications.
IC694DSM324
IC694DSM314
Product Name
PACSystems RX3i Digital Servo Module, 4-Axis
(Fiber Optic Interface to Amplifiers)
PACSystems RX3i Digital Servo Module, 4-Axis
Lifecycle Status
Active
Active
Servo Motion
Servo Motion
No Backplane Restrictions
No Backplane Restrictions
1
1
Beta i Series Digital Servos
Alpha and Beta Series Digital and Analog Servos
Fiber Optic, Up to 100 meters between amplifiers
with total length of 400 meters.
Digital for Alpha and Beta Series; ±10 V velocity or
torque command for analog
4 Digital
2 Digital and 1 Analog or 4 Analog
Incremental Master (1Mhz)
Incremental Master (1Mhz)
Electronic Cam
Yes
Yes
Velocity Feed-Forward
Yes
Yes
Encoder Feedback (Serial)
Yes
Yes
Temposonic Feedback
Yes
Yes
Number of Programs
15 Kbytes (10 + 40 Subroutines)
15 Kbytes (10 + 40 Subroutines)
15 KBytes
15 KBytes
3
3
TTL Diff/Single, 175kHz
TTL Diff/Single, 175kHz
Analog Inputs
2
4 - In Digial Mode 8 - In Analog Mode
Analog Outputs
2
4 - In Digial Mode 0 - In Analog Mode
1360 mA @ 5 VDC
1300 mA @ 5 VDC
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Drive
Drive Interface
Axes
Master Encoder Support
User Memory (Number of Programs)
Feedback Inputs
Encoder Input Type/Maximum Rate
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.49
PACSystems RX3i Mid-Range Controller
PACSystems Control
Power Measurement Modules
The Power Transducer Module (PTM) and Power Synchronization and Measurement (PSM) module
measure and calculate critical data for control of electrical power systems and synchronization of
power grids. Both the PTM and PSM connect to user supplied current and potential transformers,
which translate power grid signals to proportionate, low-level signals for measurement and analysis.
The PTM module is not intended to provide a protective relay function or be used for energy billing
purposes. The PSM module provides ANSI protective relay calculations and revenue grade monitoring for a complete genset, paralleling switchgear or infrastructure management solution. Both the
PTM and PSM consist of a processing module that plugs into the PLC backplane, an interface module
for field wiring connections, and cables to interconnect the two modules. The PTM and PSM can be
used with Wye or Delta type three-phase power or with single-phase power systems.
Product Name
IC693PTM101
IC694PSM001
Power Transducer Module Processing Module interface
board (a panel mounted circuit board). This board interfaces between
the Power Transducer module and the input transformers (current
and potential), 1.0 meter Interface cable that connects the module
to the Interface board.
Power Synchronization and Measurement Module and Interface
Module (a panel mounted terminal block). The interface module
translates power grid signals from external, user supplied potential
and current transformers (PT’s and CT’s) to low voltage signals
suitable for the processing module. 2.0 meter Interface cables
connect the processing module to the Interface module.
Mature
Active
Power Transducer Modules
Power Synch and Measurement Module
Lifecycle Status
Module Type
Input Voltage Range
Power Measurement
Configurations
Current Input Range
Frequency Range
Output Rating
Number of Outputs
Data
10-120 VAC (nominal)
Grids
1
0
Circuits
0
up to 4
0 to 7.5 Amps RMS (5 A RMS nominal)
1.50
Circuits
0
up to 3
up to 6
0 to 7.5 Amps RMS (5 A RMS nominal)
35Hz to 70Hz
40Hz to 70Hz
N/A
150 VAC/VDC, 1 A
0
1 (provided as redundant, isolated, solid-state contacts)
Data availability
~3PcPRP[Rd[PcX^]aPcT)!0ms @ 50Hz, 16.67ms @ 60Hz
~3PcP[PcT]Rh) $\b/$7i %%&\b/%7i
Data availability
~3PcP\TPbdaT\T]caPcT)!\b/$7i %%&\b/%7i
~3PcP[PcT]Rh)'\b
Measured Data
~A<Be^[cPVT^U_WPbT01P]S2X]E^[cbg ~A<BRdaaT]cb^U_WPbT012P]S=TdcaP[X]0\_TaTbg U^aTPRWVaXS
~32R^\_^]T]c^U\TPbdaTSA<Be^[cPVTbX]E^[cbg ~5aT`dT]Rh^U_WPbT0VaXS X]7ig ~?WPbTP]V[TQTcfTT]_WPbT0VaXS P]S_WPbT0VaXS!X]STVaTTbg Measured Data
~A<Be^[cPVT^U_WPbT01P]S2X]E^[cbg ~A<BRdaaT]cb^U_WPbT012P]S=TdcaP[X]0\_TaTbg U^aTPRWVaXS
~32R^\_^]T]c^U\TPbdaTSA<Be^[cPVTbX]E^[cbg ~5aT`dT]Rh^U_WPbT0VaXS P]S_WPbT0VaXS!X]7ig ~?WPbTP]V[TQTcfTT]_WPbT0VaXS P]S_WPbT0VaXS!X]STVaTTbg Power and Energy Data
~0RcXeTP]SaTPRcXeT_^fTaaT_^acTS_Ta_WPbTP]Sc^cP[X]FPccbE^[c0\_TaTb
Reactive (VAR)
~0RcXeTP]SaTPRcXeTc^cP[T]TaVhR^]bd\_cX^]X]FPccBTR^]SbP]SE^[c
Amperes-Reactive-Seconds (updated once per second), re-settable by the user
~C^cP[_^fTaUPRc^a
~0eTaPVTaTP[P]SaTPRcXeT_^fTaR^]bd\_cX^]b[XSX]V $\X]dcTfX]S^fd_SPcTS
once per second)
Calculated Data
~ATP[P]SaTPRcXeT_^fTaaT_^acTS_Ta_WPbTP]Sc^cP[X]FPccbE^[c0\_TaTb
Reactive (VAR)
~ATP[P]SaTPRcXeTc^cP[T]TaVhR^]bd\_cX^]X]cTVaPcTS^eTacWT_Pbc bTR^]S
in Kilo Watt-Hours (kWh) and Kilo Volt-Amperes-Reactive-Hours (kVARh)
~C^cP[_^fTaUPRc^a
~0eTaPVTaTP[P]SaTPRcXeT_^fTaR^]bd\_cX^]b[XSX]V $\X]dcTfX]S^f
updated once per second)
~<^Sd[T7TPacQTPcX]SXRPcTb\^Sd[TWTP[cW
~DcX[Xch?WPbT0e^[cPVT_aTbT]c
~?WPbT_^[PaXcheP[XS
~E^[cPVT\TPbdaT\T]cbeP[XS
~2daaT]c\TPbdaT\T]cbeP[XS
~<^Sd[T7TPacQTPcX]SXRPcTb\^Sd[TWTP[cW
~5XT[SR^]]TRcX^]>:
~0]hVaXSP[Pa\bX]V[TQXcX]SXRPcX^]^U_^fTaVaXSWTP[cW
~6aXSE^[cPVTUPd[c
~6aXS2daaT]cUPd[c
~<XgTS?^[PaXchUPd[c
~0=B8?a^cTRcX^]AT[Ph2P[Rd[PcX^]b
Grid Synchronization (ANSI 25)
Phase Shift OK
Voltage Difference OK
Frequency Difference OK
Close Relay OK
Under Voltage alarm (ANSI 27)
Reverse Power alarm (ANSI 32)
Negative Sequence alarm (ANSI 46)
Over Current alarm (ANSI 50)
Over Voltage alarm (ANSI 59)
VA Imbalance alarm (ANSI 60)
Under Frequency alarm (ANSI 81U)
Over Frequency alarm (ANSI 81O)
Status and Diagnostics
Internal Power Used
20-600 VAC (nominal)
Grids
2
1
0
400 mA @ 5 VDC
GE Intelligent Platforms Control Systems Solutions
190 mA @ 5 VDC
www.ge-ip.com
PACSystems RX3i Mid-Range Controller
PACSystems Control
RX3i Pneumatic Module
This IC693MDL760 output module provides eleven pneumatic outputs and five 24 VDC sourcing outputs. For each pneumatic output, the module contains an internal 3-way solenoid-actuated valve
and an associated output fitting, which is located on the front panel. When an output is turned ON,
its internal valve connects a user supplied pressure source (100 psi maximum) to the output fitting.
The pressure source is connected to the fitting on the bottom of the module. When the output is
turned OFF, the valve’s output port is vented to atmosphere inside the module. Solenoid power is
supplied from an external 24 VDC source to the “DC Outputs” connector on the front panel.
IC693MDL760
Product Name
RX3i Solenoid Module
Lifecycle Status
Active
Number of Points
Pneumatic Outputs
Supply Pressure
Pressure Drop
(11) Pneumatic Outputs
(5) 24 VDC Outputs
11
100 PSI
25 psi [email protected] 0.25scfm
External Solenoid Power
21.6-26.4 VDC, 24 VDC nominal
ON Response Time/Off
Response Time
12ms max. ON 12ms max. OFF
Solenoid Inrush Current
33 mA/valve @ 24 VDC
Solenoid Holding Current
13 mA/valve @ 24 VDC
Output Fitting
Threaded for 10-32 adapter,
1/16” hose barb provided
Supply Fitting
Threaded for 10-32 adapter,
1/8” hose barb provided
Load Current per Point
Response Time (ms)
Output Type
Polarity
Internal Power Used
www.ge-ip.com
0.5A @ 30 VDC per point,
2.0A total for all five points
0.5 on/0.5 off
Transistor
Positive
75 mA from 5 VDC bus
(solenoid LEDs are powered
from external power source)
GE Intelligent Platforms Control Systems Solutions
1.51
PACSystems RX3i Mid-Range Controller
PACSystems Control
Expansion Modules for Local and Remote I/O
The RX3i supports various expansion options for local and remote I/O to optimize
configurations. The RX3i can be expanded up to 8 expansion bases using local remote
expansion module. The RX3i also supports Ethernet remote I/O using the RX3i Ethernet
Network Interface module (IC695NKT001) Series 90-30 Ethernet Network Interface module
(IC693NIU004) for more distributed I/O.
IC695NKT001
IC693NIU004
IC695LRE001
PACSystems RX3i
Ethernet Remote
I/O Expansion (Slave)
PACSystems RX3i Expansion Module
Product Name
PACSystems RX3i
Ethernet Remote I/O Expansion Kit.
Kit includes a NIU001 with two built-in
serial ports and ETM001
Lifecycle Status
Active
Active
Active
Ethernet Communications
(Supports redundant Ethernet modules)
Ethernet Communications
High Speed Serial
Expansion Module
Universal Backplane Only.
Uses PCI Bus.
Compatible with Series 90-30 bases only
Universal Backplane Only
3 (2 for NIU and 1 for Ethernet module)
N/A
No I/O slot used
RJ-45 with built-in switch. 1 RS-485 port and
one RS-232 port. Supports SNP, Serial I/O,
Modbus Slave and Modbus Master
N/A
N/A
I/O Discrete Points
2048 Inputs/2048 Outputs maximum
2048 Inputs/2048 Outputs maximum
N/A
I/O Analog Points
1264 Inputs and 512 Outputs maximum
1264 Inputs and 512 Outputs maximum
N/A
User Logic Memory
5Kbytes of local logic
No local logic
N/A
Network Data Rate
10/100Mbit ports (RJ-45)
10/100Mbit ports (RJ-45)
1 Mbaud
Slave
Slave
Master
Network Dependent
Network Dependent
Up to 700 feet (213 meters)
Supported
Supported
Yes
Network Dependent
Each Ethernet NIU can also
support up to 7 additional
local I/O racks (IC694CHSxxx)
Network Dependent
Each Ethernet NIU can also
support up to 7 additional
local I/O racks (IC694CHSxxx)
Supports 7 local expansion racks.
Discrete I/O: Maximum 320 In, 320 Out,
Analog I/O: Maximum 160 In,
80 Out per base
1250 mA @ 3.3 VDC; 1000 mA @ 5 VDC
for NIU controller and 840 mA @ 3.3 VDC;
614 mA @ 5 VDC for each Ethernet module
1.4 Amps @ 5 VDC
132 mA @ 5 VDC
Module Type
Backplane Support
Number of Slots Module
Occupies on Backplane
Built-in Communication Ports
Entity Type
Network Distance
Bus Diagnostics
Number of Drops Supported
Internal Power Used
1.52
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems Control
PACSystems RX3i Mid-Range Controller
Accessories
IC694TBB032
High Density 32 Point Terminal Block Box Style
Active
IC694TBB132
High Density 32 Point Terminal Block Box Style with Extended Shroud for Large Wiring Bundles
Active
IC694TBS032
High Density 32 Point Terminal Block Spring Style
Active
IC694TBS132
High Density 32 Point Terminal Block Spring Style with Extended Shroud for Large Wiring Bundles
Active
IC694TBC032
High Density 32 Point Terminal Block with a 40 pin Fujitsu connector. Compatible with DC Inputs, Analog Modules
only. Not compatible with DC or AC output modules.
Active
IC694ACC310
Filler Module, Blank Slot
Active
IC694ACC311
Terminal blocks, 20 terminals (qty 6) for IC694xxx low density modules
Active
IC695ACC600
RX3i Cold Junction Compensation Kit (Contains 2 CJCs) for Universal Analog and Thermocouple Input Modules
Active
IC698ACC701
Lithium Batter pack that installs in CPU for CPU310 and CMU310 only (28 days of continuous battery backup)
Active
IC693ACC302
External High capacity battery pack. (1.3 years of continuous battery backup for CPU310/CMU310 and 1 month
for CPU320/CRU320.)
Active
IC690RBK001
Rechargeable battery kit. Includes battery (IC690RBT001) and battery charger (IC690CRG001). The rechargeable
battery is compatible with PAC controllers CPU310,CPU315, CPU320 and CRU320 only. Also compatible with Series
90-30 and Series 90-70 CPUs.
Active
IC690CRG001
Battery charger. Compatible with rechargeable battery (IC690RBT001) only. The rechargeable battery is compatible with
PAC controllers CPU310,CPU315, CPU320 and CRU320 only. Also compatible with Series 90-30 and Series 90-70 CPUs.
Active
IC690RBT001
Rechargeable battery is compatible with IC690CRG001 battery charger only. The rechargeable battery is compatible
with PAC controllers CPU310, CPU315, CPU320 and CRU320 only. Also compatible with Series 90-30 and Series 90-70
CPUs., Series 90-30 and Series 90-70.
Active
IC690ACC001
Real Time Clock Battery for CPE305 and CPE310
Active
IC695ACC400
CPE305 and CPE310 CPU Battery-less Energy Pack for backing up dynamic data
Active
IC695CBL001
Energy Pack Cable
Active
IC690ACC901
Mini-Converter Kit with cable (RS-485/RS-232)
Active
IC690ACC903
RS-485 Port Isolator
Active
IC693CBL316
RS-232 cable for RX3i CPE305 programming port and also the Station Manager Cable for the Ethernet ETM001
Active
IC690CDR002
User Manuals, InfoLink CD-ROM Documentation, single-user license
Active
IC693ACC307
I/O Bus Terminator Plug
Active
IC693ACC311
Series 90-30 style IC693 I/O modules Terminal Blocks, 20 terminals (qty 6)
Active
External Power Supplies
IC690PWR024
24 VDC, 5 Amp Output Power and 120/230 VAC Input Power Power Supply
Active
IC690PWR124
24 VDC, 10 Amp Output Power and 120/230 VAC Input Power Power Supply
Active
Terminal Block Quick Connect
Terminal Block Quick Connect (TBQC) for selected I/O modules enables the user to easily connect interposing terminal blocks. The TBQC consists
of an I/O faceplate adapter that includes a 24 pin Fujitsu male connector (the faceplate replaces the 20 screw terminal connector on front of I/O
module, not compatible with the high density 36 screw terminals), cable and interposing terminal block.
TBQC I/O Module Face Plate Adapter
IC693ACC334
www.ge-ip.com
I/O module face plate adapter for 20 screw type I/O modules. Faceplate provides a 24 pin male
Fujitsu connector.
Active
GE Intelligent Platforms Control Systems Solutions
1.53
PACSystems RX3i Mid-Range Controller
PACSystems Control
TBQC Interposing Terminal Block
IC693ACC329
Interposing terminal block base for IC694MDL645, IC694MDL646, and IC694MDL240. The base can also be
used with any 20 point terminal discrete or analog modules not listed.
Active
IC693ACC330
Interposing terminal block base for IC694MDL740 and IC694MDL742
Discontinued
IC693ACC331
Interposing terminal block base for IC694MDL741
Discontinued
IC693ACC332
Interposing terminal block base for IC694MDL940
Active
IC693ACC333
Interposing terminal block base for IC694MDL340
Active
IC693ACC337
Interposing terminal block base for IC693MDL654/655/752/753 and IC694MDL654/655/752/753
Active
IC693CBL327
Cable, Left Side, One -24 Pin 90 Degree Connector, 3 Meter. Cable has a connector on only one end and open
on the other. Cable used with TBQC I/O Face Plate Adapter or Fujitsu style I/O modules.
Active
IC693CBL328
Cable, Right Side, One -24 Pin 90 Degree Connector, 3 Meter. Cable has a connector on only one end and open
on the other. Cable used with TBQC I/O Face Plate Adapter or Fujitsu style I/O modules.
Active
IC693CBL329
Cable, Left Side, One -24 Pin 90 Degree Connector, 1 Meter. from TBQC I/O Face Plate Adapter to TBQC
Interposing Terminal Block.
Active
IC693CBL330
Cable, Right Side, One -24 Pin 90 Degree Connector, 1 Meter. from TBQC I/O Face Plate Adapter to TBQC
Interposing Terminal Block.
Active
IC693CBL331
Cable, Left Side, One -24 Pin 90 Degree Connector, 2 Meter. from TBQC I/O Face Plate Adapter to TBQC
Interposing Terminal Block.
Active
IC693CBL332
Cable, Right Side, One -24 Pin 90 Degree Connector, 2 Meter. from TBQC I/O Face Plate Adapter to TBQC
Interposing Terminal Block.
Active
IC693CBL333
Cable, Left Side, One -24 Pin 90 Degree Connector, 0.5 Meter. from TBQC I/O Face Plate Adapter to TBQC
Interposing Terminal Block.
Active
IC693CBL334
Cable, Right Side, One -24 Pin 90 Degree Connector, 0.5 Meter. from TBQC I/O Face Plate Adapter to TBQC
Interposing Terminal Block.
Active
TBQC Cables
High Density Terminal Block Quick Connect (32 point I/O terminals)
High Density Terminal Block Quick Connect (TBQC) for selected I/O modules enables the user to easily connect
interpossing terminal blocks. The HDTBQC consist of a I/O module terminal block with a 40 pin Fujitsu male
connector, cable and interposing terminal block. The HDTBQC is compatible with modules that accept
IC694TBC032 (24 VDC discrete inputs and analog input and output modules. The HDTBQC is not compatible
with discrete output modules).
HDTBQC I/O Module Face Plate Adapter
IC694TBC032
High-density, 36-point, terminal block with cable connector.
IC695ALGxxx, IC69xMDL660 and IC694MDL664 modules only. Discrete output modules not supported.
Active
HDTBQC Interposing Terminal Block
IC694RTB032
High-density remote base, 36-point, with shield ground lug and removable terminal blocks.
IC695ALGxxx, IC69xMDL660 and IC694MDL664 modules only. Discrete output modules not supported.
Active
HDTBQC Interface Cables
IC694CBL005
Shielded 0.5 meter cable with termination on both ends. IC694TBC032 and IC694RTB032 only.
Active
IC694CBL010
Shielded 1.0 meter cable with termination on both ends. IC694TBC032 and IC694RTB032 only.
Active
IC694CBL030
Shielded 3.0 meter cable with termination on both ends. IC694TBC032 and IC694RTB032 only.
Active
IC694CBL130
Shielded 3.0 meter cable with termination on one end that connects to the IC694TBC032 terminal block.
The other end of the cable is non-terminated wires.
Active
1.54
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
PACSystems Control
PACSystems RX3i Mid-Range Controller
RMX and CMX Reflective Memory Fiber Optic Cables
Simplex LC to LC connector, Fiber-Optic Cable – Multimode 62.5 Micron core.
Simplex (single) cabling is used for daisy chaining Tx to Rx to/from another node until final device circles back to beginning node.
Each CMX module requires two Simplex cables per module.
CBL-000-F5-000
.5 feet (0.15 m)
Active
CBL-000-F5-001
1 foot (.31 m)
Active
CBL-000-F5-002
5 feet (1.52 m)
Active
CBL-000-F5-003
10 feet (3.04 m)
Active
CBL-000-F5-004
25 feet (7.62 m)
Active
CBL-000-F5-005
50 feet (15.24 m)
Active
CBL-000-F5-006
80 feet (24.40 m)
Active
CBL-000-F5-007
100 feet (30.49 m)
Active
CBL-000-F5-008
150 feet (45.72 m)
Active
CBL-000-F5-009
200 feet (60.98 m)
Active
CBL-000-F5-010
250 feet (76.20 m)
Active
CBL-000-F5-011
350 feet (106.68 m)
Active
CBL-000-F5-012
500 feet (152.15 m)
Active
CBL-000-F5-014
656 feet (200 m)
Active
CBL-000-F5-015
820 feet (250 m)
Active
CBL-000-F5-016
1,000 feet (304.30 m)
Active
Duplex LC to LC connector, Fiber-Optic Cable - Multimode 62.5 Micron core.
Duplex cabling is generally used with RMX system and is also good for CMX module to HUB connections. Duplex has a pair of cables connected together.
Each CMX module requires one Duplex cable per module to a hub.
CBL-000-F6-000
3 feet (0.9144 m)
Active
CBL-000-F6-001
6 feet (1.8288 m)
Active
CBL-000-F6-002
10 feet (3.048 m)
Active
CBL-000-F6-003
16 feet (4.8768 m)
Active
CBL-000-F6-004
32 feet (9.7536 m)
Active
CBL-000-F6-005
66 feet (20.1168 m)
Active
CBL-000-F6-006
98 feet (29.8704 m)
Active
CBL-000-F6-007
164 feet (49.9872 m)
Active
CBL-000-F6-008
230 feet (70.104 m)
Active
CBL-000-F6-009
328 feet (99.9744 m)
Active
CBL-000-F6-010
393 feet (119.7864 m)
Active
CBL-000-F6-011
426 feet (129.8448 m)
Active
CBL-000-F6-012
492 feet (149.9616 m)
Active
CBL-000-F6-013
557 feet (169.7736 m)
Active
CBL-000-F6-014
656 feet (199.9488 m)
Active
CBL-000-F6-015
721 feet (219.7608 m)
Active
CBL-000-F6-016
754 feet (229.8192 m)
Active
CBL-000-F6-017
820 feet (249.936 m)
Active
CBL-000-F6-018
885 feet (269.748 m)
Active
CBL-000-F6-019
984 feet (299.9232 m)
Active
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.55
PACSystems RX3i Mid-Range Controller
PACSystems Control
Reflective Memory Interface Modules for PCs
PMC 5565 Reflective Memory PMC Module
PMC-5565PIORC-110000
PMC, 2 GIGA Baud RM w/FO Options, 128 Mbyte Memory, 4K FIFOs, Multimode Transmission
Active
PMC-5565PIORC-111000
PMC, 2 GIGA Baud RM w/FO Options, 128 Mbyte Memory, 4 K FIFOs, Single Mode Transmission
Active
PMC-5565PIORC-210000
PMC, 2 GIGA Baud RM w/FO Options, 256 Mbyte Memory, 4K FIFOs, Multimode Transmission
Active
PMC-5565PIORC-211000
PMC, 2 GIGA Baud RM w/FO Options, 256 Mbyte Memory, 4 K FIFOs, Single Mode Transmission
Active
PCI 5565 Reflective Memory PCI Module
PCI-5565PIORC-110000
PCI, 2 GIGA Baud RM w/FO Options, 128 Mbyte Memory, 4K FIFOs, Multimode Transmission
Active
PCI-5565PIORC-111000
PCI, 2 GIGA Baud RM w/FO Options, 128 Mbyte Memory, 4K FIFOs, Single Mode Transmission
Active
PCI-5565PIORC-210000
PCI, 2 GIGA Baud RM w/FO Options, 256 Mbyte Memory, 4K FIFOs, Multimode Transmission
Active
PCI-5565PIORC-211000
PCI, 2 GIGA Baud RM w/FO Options, 256 Mbyte Memory, 4K FIFOs, Single Mode Transmission
Active
PCI Express 5565 Reflective Memory PCIE Module
PCIE-5565RC-100000
PCI Express, 2 GIGA Baud RM w/FO Options, 128 Mbyte Memory, 4K FIFOs, Multimode Transmission
Active
PCIE-5565RC-101000
PCI Express, 2 GIGA Baud RM w/FO Options, 128 Mbyte Memory, 4K FIFOs, Single Mode Transmission
Active
PCIE-5565RC-200000
PCI Express, 2 GIGA Baud RM w/FO Options, 256 Mbyte Memory, 4K FIFOs, Multimode Transmission
Active
PCIE-5565RC-201000
PCI Express, 2 GIGA Baud RM w/FO Options, 256 Mbyte Memory, 4K FIFOs, Single Mode Transmission
Active
CMX and RMX Reflective Memory HUB (Contact GE for additional HUB configurations)
HUB-5595-308
DIN-rail Mount Reflective Memory Hub. 21 -32 VDC Power supply, 1x 10BaseT Ethernet, 1x RS232,
8x Multimode Pluggable transceivers
Active
HUB-5595-380
DIN-rail Mount Reflective Memory Hub. 21 -32 VDC Power supply, 1x 10BaseT Ethernet, 1x RS232,
8x Single mode Pluggable transceivers
Active
ACC-5595-208
Rack Mount or Desktop Reflective Memory Hub. Universal power supply, 1x 10BaseT Ethernet, 1x RS232,
8x multimode pluggable transceivers
Active
ACC-5595-280
Rack Mount or Desktop, 8 Single mode Pluggable Transceivers. And no Multimode Pluggable Transceivers
Active
Starter Kits (Only one starter kit per customer per customer site)
IC695STK001
RX3i Controller PACkage 1 Starter Kit includes RX3i with software. (includes one each IC695CPU305, IC695CHS012,
IC695LRE001, IC695PSA040, IC695ETM001, IC694ACC300, IC694MDL940 and IC646MPP001.) Limited one RX3i
starter kit per customer site.
Active
IC695STK002
RX3i with Control and View. Power PACkage 2 Starter Kit includes RX3i and QuickPanel View 6” STD with
software. (includes one each IC695CPU305, IC695CHS012, IC695LRE001, IC695PSA040, IC695ETM001, IC694ACC300,
IC694MDL940, IC754VSI06STD, BC646MQP001, IC646MPP001 and DC power supply for QuickPanel) Limited one
RX3i starter kit per customer site.
Active
IC695STK003
RX3i, The Complete PACkage with Control, Motion and View. Power PACkage 3 Starter Kit includes RX3i, motion module Active
(Servo and Amplifier sold separately) and QuickPanel View 6” STD with software. (includes one each
IC695CPU305, IC695CHS012, IC695LRE001, IC695PSA040, IC695ETM001, IC694DSM314, IC694ACC300, IC694MDL940,
IC754VSI06STD, BC646MQP001, IC646MPP001 and DC power supply for QuickPanel) Limited one RX3i starter kit per
customer site.
IC695STK004
RX3i Power PACkage 4 Starter Kit includes (one each IC695CPU305, IC695CHS012, IC695PSA040, IC695ETM001,
IC646MPP101)
IC695STK005
RX3i Power PACkage 5 Starter Kit includes (one each IC695CPU305, IC695CHS012, IC695PSA040, IC646MPP101)
Active
IC695STK006
RX3i Power PACkage 6 Starter Kit includes (one each IC695CPU305, IC695CHS012, IC695PSD040, IC695ETM001,
IC646MPP101)
Active
IC695STK007
RX3i Power PACkage 7 Starter Kit includes (one each IC695CPU305, IC695CHS012, IC695PSD040, IC646MPP101)
Active
IC695STK010
RX3i CPE 305, RX3i PROFINET Controller Module, RX3i 7-slot base, RX3i AC Power Supply, RX3i 8 Point Input
Simulator, RX3i 16 Point DC Outlet Module, VersaMax PROFINET Slave Module, VersaMax AC Power Supply,
Mixed Discrete Module, Input Simulator, I/O Base, Proficy* Machine Edition Professional Software
Active
1.56
GE Intelligent Platforms Control Systems Solutions
Active
www.ge-ip.com
PACSystems Control
PACSystems RX3i Mid-Range Controller
Demo Cases
IC695DEM001
RX3i Power PACkage 1 Demo Case that includes CPU, P/S, discrete I/O and analog I/O, high speed counter, Ethernet
and analog simulator. Proficy Machine Edition Professional Edition included.
Active
IC695DEM002
RX3i Power PACkage 2 Demo Case that includes RX3i and QP Control/View. Includes CPU, P/S, discrete I/O and analog I/O, Active
Ethernet, analog simulator, 6” TFT QuickPanel View/Control. Proficy Machine Edition Professional Edition included.
IC695DEM004
Beta i Series 1-Axis Motion Demo Case. Demo case is a self contained table top demo that includes a DSM324i module,
Beta i motor and amplifier prewired for connection to a DSM324i motion module. The cables (1 meter) for connection
to the DSM324i 5 V I/O and FSSB fiber optic command interface are included. Demo includes an E-stop push button
and toggle switches for 5 DSM324i I/O points.
Active
IC694 Rack to Rack Expansion Cables
IC693CBL300
Cable, I/O Base Expansion, 1 Meter, Shielded
Active
IC693CBL301
Cable, I/O Base Expansion, 2 Meters, Shielded
Active
IC693CBL302
Cable, I/O Base Expansion, 15 Meter, Shielded with built-in terminator
Active
IC693CBL312
Cable, I/O Base Expansion, 0.15 Meter, Shielded
Active
IC693CBL313
Cable, I/OBase Expansion, 8 Meters, Shielded
Active
IC693CBL314
Cable, I/O Base Expansion, 15 Meters, Shielded with no built-in terminator
Active
IC693ACC307
I/O Bus Terminator Plug
Active
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.57
PACSystems RX3i Mid-Range Controller
PACSystems Control
Configuration Guidelines
When configuring a RX3i the following guidelines should be considered:
1.
IC695 part numbers can only be installed in a Universal Rack (IC695CHSxxx).
2.
CPU, NIU and AC Power Supply require 2 slots each on the base plate.
3.
IC695 I/O modules and high density IC694 I/O modules require a terminal block assembly. IC694TBSxxx (spring clamp termination) or
IC694TBBxxx (box style termination) are required.
4.
If the CPU is powered down frequently a high capacity battery should be considered. (IC693ACC302)
Examples of Typical Application
Configuration for Controller
(Example application requiring (120) 24 VDC inputs and (80) Relay outputs AC power supply)
Backplane Slots Required
Power Supply Current Required (mA)
2
1000 mA @ 3.3 VDC; 1000 mA @ 5 VDC
Qty
Part Number
Description
1
IC695CPE310
CPU with two built-in serial ports
1
IC695PSA040
120/240 VAC, 125 VDC Power Supply, current available
9 Amps @ 3.3 VDC; 6 Amps @ 5 VDC; 1.6 Amps @ 24 VDC
maximum
600 mA @ 3.3 VDC; 240 mA @ 5 VDC
1
IC695CHS016
16 Slot Universal Base
4
1200 @ 5 V
4
IC694MDL660
Discrete Input Module, 24 VDC Positive Logic, 32 points
(Requires terminal block)
5
35 mA @ 5 V; 110 mA @ 24 VDC Relay
5
IC694MDL940
Discrete Output Module, Relay 2.0 A per point Form A,
16 points (Terminal block included).
4
IC694TBB032
Terminal Block, Box Style
1
IC646MPP001
Logic Developer -PLC Professional
2
13
Total current from power supply
required: 2475 mA @ 5 V; 1600 @
3.3 V; 110 mA @ 24 VDC Relay.
Only one power supplied needed.
Options to consider
840 mA @ 3.3 VDC; 614 mA @ 5 VDC
1.58
GE Intelligent Platforms Control Systems Solutions
1
IC695ETM001
Ethernet module 10/100Mbits
1
IC690PWR024
24 VDC, 5 Amp Output Power and 120/230 VAC Input
Power Power Supply
1
IC754VSI06STD
QuickPanel View Intermediate 6 inch STN Touch
Operator Interface
www.ge-ip.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement