Universal Furniture Modern Farmhouse Kitchen Table Assembly Instructions
Universal Furniture Modern Farmhouse Kitchen Table
The Universal Furniture Modern Farmhouse Kitchen Table is a sturdy and stylish piece of furniture that is perfect for any kitchen or dining room. The table is made from high-quality materials and is built to last. It is also easy to assemble and maintain.
The table top is made from a durable laminate that is resistant to scratches and stains. The legs are made from solid wood and are strong and sturdy. The table also features a metal frame that provides additional support.
The table is available in a variety of sizes and finishes to match your décor. It is also easy to clean and maintain. Simply wipe it down with a damp cloth and mild soap.
advertisement
INSTRUCTION SHEET
U011B652 Kitchen Table
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come loose inside the carton during shipment.
Caution: (1) These parts are cumbersome and heavy. This product can best be assembled with the assistance of one or more persons in order to prevent personal injury and to insure parts are not damaged during the assembly process. If dirty, clean finished parts with mild dishwashing liquid and water solution applied on damp cloth. Cloth should not be excessively wet. Polish finish with soft cloth and an industry recognized furniture polish.
(2) To prevent damage to your floor or carpet, please check the bottom of each piece of furniture for stain residue and rough surfaces and also check for staples or nails left after removing the packaging material.
The manufacturer will not be held responsible if preventative steps are not taken prior to installation.
(3) Unpack and dispose of all packing material but be careful not to throw away any assembly parts or hardware. Read the instruction sheet and parts list carefully. Remove all staples and screws used for packaging carefully using pliers and or screwdrivers to prevent injury and scratching or damaging flooring.
(4) During normal use everyday, screws, bolts, nuts and wooden plugs may loosen up. They should be periodically inspected and re-tightened to prevent damage to the furniture and (or) personal property or cause injury. Always check to be sure all hardware on this list and the above mentioned components is attached to the furniture properly and kept tightened at all times.
PARTS LIST:
# Description Qty. # Description Qty.
A Table Top 1pc B Legs
Assembly Procedure : (Please follow the sketches below.)
4pcs
Step 1: Unpack, inspect, and read assembly instruction carefully. Lay out the parts and hardware.
Make sure the quantity of each is correct.
Step 2: Put the Table top (A) upright down on a soft and smooth surface to avoid damage or being scratched. Then attach Legs (B) to Table top (A) with Hex head bolt (1), Spring washer (2) and Flat washer (3) using wrench (4).
Assembly is now complete.
U011B652
INSTRUCTION SHEET
Kitchen Table
advertisement
Related manuals
advertisement