Speakman SE-912 Stay Open Ball Valve Installation Manual
Speakman SE-912
The Speakman SE-912 is a stay-open ball valve designed for vertical and horizontal installation. It is made of brass and has a 1-1/2" NPT female inlet and outlet. The valve is activated by pulling downward on the triangular pull handle. The valve will continue to discharge water until the handle is manually pushed up to the off position.
The SE-912 is ideal for use in a variety of applications, including:
- Emergency showers
- Eyewash stations
- Industrial settings
- Laboratories
- Hospitals
The SE-912 is easy to install and maintain.
Advertisement
Advertisement
SPEAKMAN COMPANY
SE-912-T Installation, Maintenance & Operation Instructions
DESCRIPTION
Stay-open ball valve for vertical and horizontal installation.
SPECIFICATIONS
VALVE: 1-1/2” NPT Female Brass. Stay-Open Ball Valve.
ACTIVATOR: Stainless Steel Triangular Pull Handle.
INLET: 1-1/2” NPT Female.
OUTLET: 1-1/2” NPT Female.
SHIPPING WEIGHT: 6 lb.
OPTIONS
◊
AL1
(Air Horn Alarm)
◊
AL2
(Electrical Alarm)
◊
AL3
(Electrical Alarm)
◊
AL2-C1D2
(Electrical Alarm / Haz.
Area)
◊
AL3-C1D2
(Electrical Alarm / Haz.
Area)
◊
FLW (Flow Switch)
INSTALLATION
Assemble valve to a horizontal or vertical water supply that has an uninterrupted source of potable water. Use pipe sealant on all joints. Failure to use potable water can result in emergency units producing impure or contaminated water causing possible further injury.
OPERATION
This shower is activated by pulling downward on the lever handle. The valve will continue to discharge water until the handle is manually pushed up to the off position.
TESTING PROGRAM
The American National Standards Institute (ANSI) states that all safety emergency equipment shall be activated on a weekly basis to flush the line and verify proper operation. Speakman Company furnishes a testing record tag
(91-0635) with each unit. On this tag the date of inspection and the inspectors initials should be noted.
MAINTENANCE
Should you need parts to repair this unit, please reference the parts list below for correct part numbers. Before any maintenance is done be sure to shut the water supply off.
WARNING: Use only genuine Speakman parts when repairing or replacing components . To order parts call 1-800-537-
2107.
SE-912-T REPLACEMENT/REPAIR PARTS
ITEM PART/GROUP # DESCRIPTION
1 20-0895 1-1/2” Bronze
Ball Valve W/
2
3
4
04-0494
04-0362-RCP
01-0788
FLOW DATA
VALVE:
1-1/2” Ball Valve
Cast Brass Handle
Nut For 1-1/2” Ball
Valve
FLOW PRESSURE PSI (BAR)
FLOW RATE GPM (LPM)
5 (.34) 10 (.69) 15 (1.03) 20 (1.38) 25
(1.72)
38 (144) 62 (235) 74 (280) 86 (326) 97 (367)
NOTE: This unit should be connected to an uninterrupted source of potable water, with a minimum flowing pressure of 20 PSI and a maximum static pressure of 125 PSI.
SPEAKMAN COMPANY
The Quality leader Since 1869
P.O. Box 191, Wilmington, DE 19899-0191 USA
1-800-537-2107, Fax: 1-800-977-2747
Note: All units meet existing
ANSI Z358.1 1998
Standards and OSHA Rules.
Product improvements may cause specification and dimensional changes without notice.
6/98
92-1531 Rev-2
Advertisement