tender for hospital furniture, fixtures, equipments

tender for hospital furniture, fixtures, equipments
OFFICE OF THE MISSION DIRECTOR
National Health Mission, Assam
Saikia Commercial Complex, Srinagar Path, Christian Basti,
G S Road,Guwahati-781005, Assam
Website : www.nrhmassam.in
e-mail : misnrhm.assam@gmail.com
Ref: NRHM/PROC/ HOS-EQP / 1930/2013-14/43858
Date: 19/02/2014
CORRIGENDUM NO. 2
(TENDER FOR HOSPITAL FURNITURE, FIXTURES, EQUIPMENTS & INSTRUMENTS)
Pursuant to the Pre-Bid conferences held on 08-01-2014 and 12-02-2014 certain terms
and conditions incorporated in Tender No. NRHM/PROC/ HOS-EQP / 1930/201314/39260 Date23/12/2013 have been amended. The details of the amendments have
been uploaded in the official website www.nrhmassam.in which should be taken note of
prior to submission of bids. The last date & time for submission of bids is also extended
to 05-03-2014 (before 2.00 PM).
Sd/( Manish Thakur, I.A.S)
Mission Director, NHM
OFFICE OF THE MISSION DIRECTOR
National Health Mission, Assam
Saikia Commercial Complex, Srinagar Path, Christian Basti,
G S Road,Guwahati-781005, Assam
Website : www.nrhmassam.in
Ref: NRHM/PROC/ HOS-EQP / 1930/2013-14/43858
SUB:
e-mail : misnrhm.assam@gmail.com
Date: 19/02/2014
DETAILS OF AMENDMENTS TO TENDER NO: NRHM/PROC/HOSEQP/1930/2013-14/39260 Date23/12/2013 FOR SUPPLY OF HOSPITAL
FURNITURE, FIXTURES, EQUIPMENTS & INSTRUMENTS
The terms & conditions incorporated in the subject tender which have been amended
pursuant to pre-bid discussions with interested firms, are detailed in the paragraphs below.
All other terms and conditions of the tender shall, however, remain unchanged.
(1)
CLAUSE 1 (LAST DATE FOR RECEIPT OF TENDERS) IS AMENDED TO READ AS FOLLOWS
Sealed Tenders in two separate covers {Technical bid (Cover “A”) and Price Bid
(Cover “B”)} will be received up to 05-03-2014 till 2 PM by the Mission Director,
National Health Mission, Saikia Commercial Complex, Srinagar Path, Christianbasti, G
S Road, Guwahati-781005, Assam
(2)
CLAUSE 2 (IMPORTANT NOTES) IS AMENDED TO READ AS FOLLOWS:
a) The bidder shall quote prices in Indian Rupees only, on FOR destination basis.
b) Delivery of the ordered items shall be affected at the designated Health Institutions
spread over 27 districts in Assam,
c) Arrangement of Road Permits for despatch of consignments shall be the
responsibility of the successful bidder (s).
d) There is no guarantee on the quantity of items to be supplied during the tenure of
any contract arising out of this tender. The successful bidder (s) will be called upon
to supply one or more items in a Group in such quantities as would be required
from time to time during the contract period based on actual need assessed by
NHM Assam.
(3)
CLAUSE 4 (ELIGIBILITY CRITERIA) IS AMENDED TO READ AS FOLLOWS:
A. Bidder shall either be a manufacturer or a distributor/dealer having experience
of supplying Hospital Furniture & Fixture/Medical Equipments/Instruments to
Govt. Organizations.
B.
Average Annual turnover of the bidder (who is not a manufacturer) in the last
three financial years i.e. 2010-11, 2011-12, 2012-13 from sales of Hospital
Furniture & Fixtures/Medical Equipments/Instruments shall be as under:
- Not less than Rs 1.20 crores for Group A
- Not less than Rs 1.00 crore for Group B
- Not less than Rs 2.10 crores for Group C
- Not less than Rs 1.45 crores for Group D
- Not less than Rs 1.90 crores for Group E
- Not less than Rs 1.00 crore for Group F
- Not less than Rs 2.95 crores for Group G
- Not less than Rs 2.50 crores for Group H
- Not less than Rs 0.25 crores for Group I
- Not less than Rs 1.35 crores for Group J
In the event a bidder quotes for more than one group then the Average
Annual Turnover of the bidder in the last three financial years shall not be
less than the summation of the specified Average Annual Turnover for each
Group selected for the bid. For example, if a bidder quotes for Group A,
Group C and Group E then their Average Annual Turnover in the last three
financial years shall not be less than Rs 5.20 crores.
C.
Manufacturer participating as bidder or manufacturer from whom the
Hospital Furniture & Fixture/Medical Equipments/Instruments would be
sourced by the dealer should have the following Average Annual Turnover in
the last 3 financial years i.e. 2010-11, 2011-12, 2012-13:
- Not less than Rs 15.00 Crores for Groups A, B, C & D
- Not less than Rs 05.00 Crores for Groups F & G
- Not less than Rs 01.00 Crores for Groups E, H & I
- Not less than Rs 00.50 Crores for Group J
However, for manufacturers of Hollow Wares in any of the Groups, the
average Annual Turnover in the last three financial years shall not be less
than Rs 0.25 Crore.
D.
Bidder should have at least 3(Three) years Market Standing as supplier of
Hospital Furniture & Fixture/Medical Equipments/Instruments.
E.
Manufacturers of Hospital Equipments/Instruments/Furniture/Fixtures shall
have valid certificates as under:
-
F.
Certificate of approval of AERB/BARC for Group A
US FDA Certificate & European CE Certificate for Group B, Group C &
Group D
US FDA/CE Certificate and ISO 9001:2008 Certificate for Group E
US FDA/European CE Certificate & ISO 9001:2008 Certificate for Group F
US FDA/CE Certificate & ISO 9001:2008 Certificate for Group G
ISO 9001:2008 & ISO 14001:2004 & OHSAS 18001:2007 Certificate for
Group H and Group I
US FDA/CE Certificate & ISO 9001:2008 for Group J
The bidder for any Group of items shall have experience in supply &
installation of Hospital Furniture & Fixture/Medical Equipments/Instruments
in the last 3 (three) financial years and value of a single order awarded by a
Government Organization for similar items during this period shall be at least
Rs 50.00 Lakhs.
(4)
(5)
G.
Bidder should have experience & knowledge of modes of packing,
distribution & transportation of such items under any weather conditions.
H.
Bidder who has been blacklisted either by the Tender Inviting Authority or by
any State Government or Central Government Organization will not be
allowed to participate in the tender during the period of blacklisting.
SUB CLAUSES (I) & (II) UNDER CLAUSE 5 (GENERAL CONDITIONS) ARE AMENDED TO
READ AS FOLLOWS:
(I)
There are ten groups of items in the tender (Groups A, B, C, D, E, F, G, H, I &
J). A bidder must quote for all the items in a particular Group as indicated in
the bid document. In case, a bidder does not quote for one or more items in a
particular Group, the bid for that Group shall be considered incomplete and
will be liable for rejection.
(II)
A bidder may quote for any or all the Groups. A bidder quoting rates for
supply of items in Group A, B, C, D, E, F & G must also quote for
Comprehensive Maintenance Contract price of such items for a period of 3
years.
SUB CLAUSES B, I & K UNDER CLAUSE 6 ( TECHNO-COMMERCIAL BID - COVER “A”)
ARE AMENDED TO READ AS FOLLOWS:
B
Earnest Money Deposit (EMD)
Earnest Money Deposit of amounts indicated below only in the form of Demand
Draft/Banker’s Cheque/Bank Guarantee
favoring “State Health Society,
Assam”. In case of BG, the same shall be valid for 120 days. Earnest Money
Deposit in any other form will not be accepted. Earnest Money Deposit will
not earn any interest. The Earnest Money Deposit of the successful Bidder
may, at the discretion of Tender Inviting Authority, be adjusted towards the
Security Deposit payable by the Bidder.
-
EMD of Rs 7,91,000.00 for Group A
EMD of Rs 5, 78,000.00 for Group B
EMD of Rs 13, 82,000.00 for Group C
EMD of Rs 9,47,000.00 for Group D
EMD of Rs 12, 64,000.00 for Group E
EMD of Rs 5,67,000.00 for Group F
EMD of Rs 19, 59,000.00 for Group G
EMD of Rs 16, 50,000.00 for Group H
EMD of Rs 1, 51,000.00 for Group I
EMD of Rs 9,00,000.00 for Group J
In the event a bidder quotes for more than one group then the EMD specified
for each selected group must be added and the total amount submitted in
the form of Demand Draft/Banker’s Cheque/Bank Guarantee favoring “State
Health Society, Assam”
I
CE/US FDA, ISO, OHSAS & other Certificates
-
K
Attested/notarized copies of Certificate of approval of AERB/BARC for
Group A
Attested/notarized copies of US FDA Certificate & European CE Certificate
for Group B, Group C & Group D
Attested/notarized copies of US FDA/CE Certificate and ISO 9001:2008
Certificate for Group E
Attested/notarized copies of US FDA/European CE Certificate & ISO
9001:2008 Certificate for Group F
Attested/notarized copies of US FDA/CE Certificate & ISO 9001:2008
Certificate for Group G
Attested/notarized copies of ISO 9001:2008 & ISO 14001:2004 & OHSAS
18001:2007 Certificate for Group H and Group I
Attested/notarized copies of US FDA/CE Certificate & ISO 9001:2008 for
Group J
Execution of similar contracts (By bidder)
Details of supplies (Hospital Furniture & Fixtures/Equipments & Instruments)
made during the last 3 financial years with summary of Purchase Orders and
Performance Certificates issued by clients in the specified format (Refer
Annexure IV). Items supplied to Govt. institutions and to programs sponsored
by WHO, UNICEF etc., if any, during the last 3 years should be highlighted.
Attested/notarized copies of orders/contracts for similar items including one
single order of value at least Rs 50.00 Lakhs executed for a Government
Organization during the last 3 years should be submitted.
The paragraph following “Check list of documents” shall read as under:
The above documents should be sealed in a separate cover super scribed as
"TECHNICAL BID, COVER “A” (TENDER FOR SUPPLY OF HOSPITAL FURNITURE,
EQUIPMENTS ETC DUE ON 05/03/2014)”and addressed to the Mission
Director, National Health Mission, Assam. Saikia Commercial Complex, Srinagar
Path, Christian Basti, G S Road, Guwahati-781005
(6)
CLAUSE 7 (PRICE BID - COVER “B”) IS AMENDED TO READ AS FOLLOWS:
PRICE BID - COVER”B”
Cover “B” shall contain the Price Bids separately for Group A, Group B, Group
(C), Group (D), Group (E) & Group (F), Group (G), Group (H) and Group (I) in the
formats at the revised Annexures included in this document viz. Annexure XII
(A-Rev 1), Annexure XII (B-Rev 1), Annexure XII (C-Rev 1), Annexure XII (D-Rev
1), Annexure XII (E-Rev 1), Annexure XII (F-Rev 1), Annexure XII (G-Rev 1),
Annexure XII (H-Rev 1), Annexure XII (I-Rev 1) and Annexure XII (J-Rev 1),
respectively.
A.
Signature & Seal on each Page
Each page of the Price Bid should be duly signed by the Bidder affixing the
office seal.
B.
Signature on corrections
Bid should be typewritten and every correction in the bid should be attested
with full signature by the Bidder, failing which the bid will be ineligible.
Corrections done with correction fluid should also be duly attested.
A.
Items Quoted & Rates
The Bidder shall separately fill up the Annexure XII (A-Rev 1), Annexure XII (BRev 1), Annexure XII (C-Rev 1), Annexure XII (D-Rev 1), Annexure XII (E-Rev 1),
Annexure XII (F-Rev 1), Annexure XII (G-Rev 1), Annexure XII (H-Rev 1),
Annexure XII (H-Rev 1), and Annexure XII (J-Rev 1) for items quoted.
B.
Landed Cost
The rate quoted per unit or landed price in Annexure-XII shall be inclusive of
excise duty, sales tax, packaging charge, freight, Insurance etc. The
component of VAT/Sales Tax should also be shown separately.
C.
Unit Size/ Rate
The rate quoted in Annexure XII (A-Rev 1), Annexure XII (B-Rev 1), Annexure XII
(C-Rev 1), Annexure XII (D-Rev 1), Annexure XII (E-Rev 1), Annexure XII (F-Rev 1),
Annexure XII (G-Rev 1), Annexure XII (H-Rev 1), Annexure XII (H-Rev 1) and
Annexure XII (J-Rev 1), should be for a unit and given specification. The Bidder
is not permitted to change / alter specification or unit size given in the
Annexures.
The above documents should be sealed in a separate cover superscribed as
"PRICE BID, COVER “B” (TENDER FOR SUPPLY OF HOSPITAL FURNITURE,
EQUIPMENTS ETC DUE ON
05/03/2014)” and addressed to the Mission
Director, National Health Mission, Assam. Saikia Commercial Complex, Srinagar
Path, Christian Basti, G S Road, Guwahati-781005
The two separately sealed covers {Technical bid (Cover “A”) and Price Bid (Cover “B”)}
shall be placed together inside another cover which shall be sealed and superscribed as
“TENDER FOR SUPPLY OF HOSPITAL FURNITURE, EQUIPMENTS ETC DUE ON 05/03/2014”
and addressed to the Mission Director, National Health Mission, Assam. Saikia Commercial
Complex, Srinagar, G S Road, Guwahati-781005
(7)
CLAUSE 10 (VALIDITY OF OFFER OF SUCCESSFUL BIDDER) IS AMENDED TO READ AS
FOLLOWS:
The validity of offer of the successful bidder shall be at least 02(two) years from the
date of finalization of the order and the successful bidder will be bound to supply the
items at agreed rates and terms during this period. This validity period may be
further extended by one year with mutual consent.
(8)
SUB CLAUSE A UNDER CLAUSE 11 (OTHER CONDITIONS) IS AMENDED TO READ AS
FOLLOWS:
A. Item Details & Quantity
Specifications & Details of Items are shown in the Annexures included in this
document viz Annexure-XIII (A-Rev 1), Annexure-XIII (B-Rev 1), AnnexureXIII (C-Rev 1), Annexure-XIII (D-Rev 1), Annexure-XIII (E-Rev 1), AnnexureXIII (F-Rev 1), Annexure-XIII (G-Rev 1), Annexure-XIII (H-Rev 1), AnnexureXIII (I-Rev 1) and Annexure –XII (J-Rev 1). The rates quoted should not vary
with the quantum of the order or the destination. The quantities mentioned
are indicative only and not firm. The indicated quantities may increase or
decrease based on actual requirement assessed by the Tender Inviting
Authority during the period of contract.
(9)
SUB CLAUSE A UNDER CLAUSE 12 (ACCEPTANCE OF TENDER) IS AMENDED TO READ
AS FOLLOWS:
A. Tender Evaluation
Tenders will be evaluated with reference to technical and commercial
parameters to determine the technically qualified bidders for all Groups. The
technically qualified bidders for Groups G & H items shall have to
demonstrate the following products for inspection and final assessment of
quality:
“Labour Table, Examination Couch, Hospital Bed with Mattress, Hydraulic OT
Table, Instrument Cabinet, Semi Fowler Bed, Bedside Locker, Foot Step
(Double), Mayo’s Instrument Trolley, Field Type OT Table, Instrument Trolley”
In the event any of the above products demonstrated by a technically
qualified bidder in Groups G & H is found to be deficient in terms of quality,
the offer of such bidder shall be declared as technically not acceptable. Based
on such assessment the final list of technically qualified bidders for Groups G
& H items shall be drawn up.
Price Bids of technically qualified bidders will be evaluated with reference to
the quoted rates (landed price of each item). Conditional discounts shall not
be taken into account for price comparison. The total value of each item in a
particular group will be added to determine the overall lowest price. The
bidder quoting the overall lowest price in a particular Group shall be ranked
as the L1 bidder for that group.
10)
CLAUSE 16 (SECURITY DEPOSIT) IS AMENDED TO READ AS FOLLOWS:
The successful bidder, within 10 days of signing of the agreement, shall be
required to submit Security Deposit of 5 % of the order value in the form of
bank guarantee from any Indian scheduled bank in favour of the Tender
Inviting Authority valid for the entire warranty period. However, if the
supplier fails to execute the order or fails to perform the services as per
agreement, in addition to other penal actions, the bank guarantee shall be
encashed and the amount will be forfeited.
(11)
SUB CLAUSES B AND G UNDER CLAUSE 17 (SUPPLY & SERVICE CONDITIONS) IS
AMENDED TO READ AS FOLLOWS:
B. Specifications & Quality
The items supplied by the successful Bidder shall be of the best quality and
shall comply with the specifications, stipulations and conditions specified at
Annexure-XIII (A-Rev 1), Annexure-XIII (B-Rev 1), Annexure-XIII (C-Rev 1),
Annexure-XIII (D-Rev 1), Annexure-XIII (E-Rev 1), Annexure-XIII (F-Rev 1),
Annexure-XIII (G-Rev 1), Annexure-XIII (H-Rev 1) , Annexure-XIII (I-Rev 1)
and Annexure-XIII (J-Rev 1) included in this document.
G.
Comprehensive Maintenance
The successful bidder (Supplier) for items in Group A, Group B, Group C
Group D, Group E, Group F & Group G shall provide post warranty
Comprehensive Annual Maintenance Contract (CAMC) service for a period 3
years from the date the warranty is over. The CAMC amount shall include
cost of labour, spare parts and consumables required for repair and
maintenance of equipments. The scope of work during the CAMC period
shall include, inter-alia, the following:
i)
ii)
iii)
iv)
12)
To ensure 95 % uptime of the equipments.
To upgrade software free of cost.
To undertake 4 preventive maintenance service in a year.
To attend to breakdown calls within 24 hours of reporting a fault.
THE OPENING PARAGRAPH UNDER CLAUSE 24 (PAYMENT PROVISIONS) IS
AMENDED TO READ AS FOLLOWS:
Payments towards the supply of items will be made strictly as per rules of the Tender
Inviting Authority. 90 % payment will be released on delivery of equipment and
balance 10 % on satisfactory installation/commissioning. The payments for CAMC
service will be made on yearly basis after satisfactory performance of service each
year.
Scroll down to next page………………………………
13)
ANNEXURE VII A IS AMENDED TO READ AS FOLLOWS
Annexure –VIII A
List of items quoted
(To be submitted separately for Groups A, B, C, D, E, F, G, H, I &J)
Tender No._________________
Sr.
Description of Items
No.
Group (
Manufacturer’s
Warranty
Price
Technical
Name
Period in
Quoted/
Specifications
Years
Not
Attached/Not
Quoted
Attached
)
SIGNATURE
:
NAME & DESIGNATION
:
DATE
:
NAME & ADDRESS OF THE FIRM
:
Scroll down to next page………………………………
14)
ANNEXURE VII B IS AMENDED TO READ AS FOLLOWS
Annexure –VIII B
Technical Compliance Statement
(To be submitted separately for Groups A, B, C, D, E, F, G, H, I &J)
Tender No._________________
Sr.
Name of the Item
No.
Group(
)
Technical Specifications as
Technical Specifications
per Tender (Annexure-XIII)
quoted by the bidder
SIGNATURE
:
NAME & DESIGNATION
:
DATE
:
NAME & ADDRESS OF THE FIRM
:
Scroll down to next page………………………………
Deviations, if any
AMENDED FORMATS
Scroll down to next page………………………………
Annexure XII (A-Rev 1)
PRICE BID FOR GROUP “A” ITEMS
TENDER NO…………………………………….
Sl
Brief Description of items
Group( A)
Qty.
Nos.
Basic Rate per
unit
Rs
Tax/VAT per
unit
Rs
Total
(For supply)
Rs
3 x(4+5)
1
1
2
3
4
5
6
Post Warranty
CAMC charge
(for 3 years)inclusive of all
taxes
Rs
7
Total (For Post
Warranty
CAMC)
Rs
3 x7
Total
(Supply+ CAMC)
Rs
(6+8)
8
9
2
3
Grand Total =
Rs………………………
Rs (in words)………..
SIGNATURE
:
NAME & DESIGNATION
:
DATE
:
NAME & ADDRESS OF THE FIRM
:
Annexure XII (B-Rev 1)
PRICE BID FOR GROUP “B” ITEMS
TENDER NO…………………………………….
Sl
Brief Description of items
Group( A)
Qty.
Nos.
Basic Rate per
unit
Rs
Tax/VAT per
unit
Rs
Total
(For supply)
Rs
3 x(4+5)
1
1
2
3
4
5
6
Post Warranty
CAMC charge
(for 3 years)inclusive of all
taxes
Rs
7
Total (For Post
Warranty
CAMC)
Rs
3 x7
Total
(Supply+ CAMC)
Rs
(6+8)
8
9
2
3
Grand Total =
Rs………………………
Rs (in words)………..
SIGNATURE
:
NAME & DESIGNATION
:
DATE
:
NAME & ADDRESS OF THE FIRM
:
Annexure XII (C-Rev 1)
PRICE BID FOR GROUP “C” ITEMS
TENDER NO…………………………………….
Sl
Brief Description of items
Group( A)
Qty.
Nos.
Basic Rate per
unit
Rs
Tax/VAT per
unit
Rs
Total
(For supply)
Rs
3 x(4+5)
1
1
2
3
4
5
6
Post Warranty
CAMC charge
(for 3 years)inclusive of all
taxes
Rs
7
Total (For Post
Warranty
CAMC)
Rs
3 x7
Total
(Supply+ CAMC)
Rs
(6+8)
8
9
2
3
Grand Total =
Rs………………………
Rs (in words)………..
SIGNATURE
:
NAME & DESIGNATION
:
DATE
:
NAME & ADDRESS OF THE FIRM
:
Annexure XII (D-Rev 1)
PRICE BID FOR GROUP “D” ITEMS
TENDER NO…………………………………….
Sl
Brief Description of items
Group( A)
Qty.
Nos.
Basic Rate per
unit
Rs
Tax/VAT per
unit
Rs
Total
(For supply)
Rs
3 x(4+5)
1
1
2
3
4
5
6
Post Warranty
CAMC charge
(for 3 years)inclusive of all
taxes
Rs
7
Total (For Post
Warranty
CAMC)
Rs
3 x7
Total
(Supply+ CAMC)
Rs
(6+8)
8
9
2
3
Grand Total =
Rs………………………
Rs (in words)………..
IGNATURE
:
NAME & DESIGNATION
:
DATE
:
NAME & ADDRESS OF THE FIRM
:
Annexure XII (E-Rev 1)
PRICE BID FOR GROUP “E” ITEMS
`
TENDER NO…………………………………….
Sl
Brief Description of items
Group( A)
Qty.
Nos.
Basic Rate per
unit
Rs
Tax/VAT per
unit
Rs
Total
(For supply)
Rs
3 x(4+5)
1
1
2
3
4
5
6
Post Warranty
CAMC charge
(for 3 years)inclusive of all
taxes
Rs
7
Total (For Post
Warranty
CAMC)
Rs
3 x7
Total
(Supply+ CAMC)
Rs
(6+8)
8
9
2
3
Grand Total =
Rs………………………
Rs (in words)………..
SIGNATURE
:
NAME & DESIGNATION
:
DATE
:
NAME & ADDRESS OF THE FIRM
:
Annexure XII (F-Rev 1)
PRICE BID FOR GROUP “F” ITEMS
TENDER NO…………………………………….
Sl
Brief Description of items
Group( A)
Qty.
Nos.
Basic Rate per
unit
Rs
Tax/VAT per
unit
Rs
Total
(For supply)
Rs
3 x(4+5)
1
1
2
3
4
5
6
Post Warranty
CAMC charge
(for 3 years)inclusive of all
taxes
Rs
7
Total (For Post
Warranty
CAMC)
Rs
3 x7
Total
(Supply+ CAMC)
Rs
(6+8)
8
9
2
3
Grand Total =
Rs………………………
Rs (in words)………..
SIGNATURE
:
NAME & DESIGNATION
:
DATE
:
NAME & ADDRESS OF THE FIRM
:
Annexure XII (G-Rev 1)
PRICE BID FOR GROUP “G” ITEMS
TENDER NO…………………………………….
Sl
Brief Description of items
Group( A)
Qty.
Nos.
Basic Rate per
unit
Rs
Tax/VAT per
unit
Rs
Total
(For supply)
Rs
3 x(4+5)
1
1
2
3
4
5
6
Post Warranty
CAMC charge
(for 3 years)inclusive of all
taxes
Rs
7
Total (For Post
Warranty
CAMC)
Rs
3 x7
Total
(Supply+ CAMC)
Rs
(6+8)
8
9
2
3
Grand Total =
Rs………………………
Rs (in words)………..
SIGNATURE
:
NAME & DESIGNATION
:
DATE
:
NAME & ADDRESS OF THE FIRM
:
ANNEXURE XII (H-Rev 1)
PRICE BID FOR GROUP “H” ITEMS
Tender No._______________
SL
DESCRIPTION OF ITEM
Group(E)
Quantity
in Nos.
1
2
3
Basic Rate
per No.
(in Rupees)
4
TAX/VAT
(in Rupees)
Total Amount (in rupees)
3 x (4+5)
5
6
In Figures
SIGNATURE
:
NAME & DESIGNATION
:
DATE
:
NAME & ADDRESS OF THE FIRM
:
In Words
ANNEXURE XII (I-Rev 1)
PRICE BID FOR GROUP “I” ITEMS
Tender No._______________
SL
DESCRIPTION OF ITEM
Group(E)
Quantity
in Nos.
1
2
3
Basic Rate
per No.
(in Rupees)
4
TAX/VAT
(in Rupees)
Total Amount (in rupees)
3 x (4+5)
5
6
In Figures
SIGNATURE
:
NAME & DESIGNATION
:
DATE
:
NAME & ADDRESS OF THE FIRM
:
In Words
ANNEXURE XII (J-Rev 1)
PRICE BID FOR GROUP “J” ITEMS
Tender No._______________
SL
DESCRIPTION OF ITEM
Group(E)
Quantity
in Nos.
1
2
3
Basic Rate
per No.
(in Rupees)
4
TAX/VAT
(in Rupees)
Total Amount (in rupees)
3 x (4+5)
5
6
In Figures
SIGNATURE
:
NAME & DESIGNATION
:
DATE
:
NAME & ADDRESS OF THE FIRM
:
In Words
ANNEXURE XIII (A-Rev1)
SPECIFICATIONS & DETAILS OF ITEMS
GROUP (A)
Si No
1
Specifications
Qty(Nos)
10
X-Ray Machine 100 mA with dark room accessories .
Counter Balanced vertical movement mechanism of Tube
carriage for easier positioning.
Digital Display for Input Voltage compensation, X-Ray ON
and Overload Protection.
LCD Display for mAs, Technic, kVp .(In case of Digital
Machines)
Microprocessor
based
Automatic
overload
Protection/Automatic overload protection with visual &
audible indication for longer life of the Tube
Independent kVp, mAs, mA techniques selection for-better
radiographic results.
Horizontal Table manual with grid 6:1
Tube-BEL/TOSHIBA
Column: Standard
Expose at 220 (An actual Input Voltage) display indicates
whether line voltage Compensation is to be increased or
decreased.
Integrated cassette box for easier cassette handling.
Line Voltage Compensation from 190v to 270v.
Standby Circuitry in case of any Electronic Component
failure thereby ensuring maximum up time.
Automatic cut off for High lnput Voltage.
Soft Touch keys for Body Part Selection. (In Case of Digital
Machines)
Beautiful Cover for Generator as a safety measures against
dust.
SPECIFICATIONS
Radiographic Rating : 25mA, 50mA, 75mA & 100mA
At 45-100kVp in steps of 5kVp
At 40-100kVp in steps of 2kVp (Digital Model)
Tube Current : 25mA, 50A, 75mA & 100mA (For 100mA)
25mA, 40mA and 60mA (For mA)
Tube Voltage : 45-100 kVp (Each Step of 5 kVp)
40-100 kVp (Each Step of 2kVp) (Digital Model)
Timer : Automatic selection by Microprocessor
(Using Combination of mAs& mA)
Tube Type : Stationary Anode Tube
Power Requirement : 220 V A.C /50Hz Single Phase
(4.9 KW for 60 mA /8.0 KW for 100 mA)
For the unit to operate safety and correctly, observe the
environmental conditions specified below. In case of storing the
unit for a long time, give special. Consideration to ventilation at
the place of storage.
TEMPERATURE : Below 50 degrees
HUMIDITY : 30 to 85% (Non Condensing)
Dark Room Accessories:X.ray developing tank
S.S, 4.5, Ltrs with lid
S.S, , 9, Ltrs with lid
S.S, 13.5 Ltrs with lid
Safe light X.ray dark room:- Size: 5” x 7”
Cassettes X.ray
Size: 8"x10",
Size: 10" x 12"
Size : 12" x 15"
Lead Apron:-Full front side
Intensifying screen X-ray
Size: 8"x10",
Size: 10" x 12"
Size : 12" x 15"
Half Blockers :- Size 8" x 10", 10" x 12", 12" x 15"
X-Ray Adoption Google
X-Ray Lead Markers
Processing Tray
X-Ray Film Cutter
X-Ray Film Hangers
Size: 8"x10",
Size: 10" x 12"
Size : 12" x 15
Warranty for 2yrs
10
2
X-Ray Machine 300 mA with dark room accessories.
Output:- 24 KW
Tube Voltage – Radiography :- 40 kVp – 125 kVp
(Each step of 2 kVp)
Tube Voltage –Fluroscopy (Optional). To be quoted
as per available specification of the manufacturer.
Tube Current : Small Focus : 50mA , 100 mA
Large Focus :- 200 mA , 300 mA
mAs Rating: 2 to 500 (Each step of 2 mAs)
Technic : 50 mA, 100 mA, 200 mA, 300 mA
Table: 5 position manual Table with grid 6:1
Standard column as approved by AERB
Tube-BEL/TOSHIBA
Timer:
Manual/Automatically
selected
by
microprocessor.
Tube Type:- Dual Focus Rotating Anod Tube.
Power Supply:- 440 V, 50/60 Hz with three to single
phase transformer.
Power Requirement: - 30 KVA.
Dark Room Accessories:X-ray developing tank
S.S, 4.5, Ltrs with lid
S.S, , 9, Ltrs with lid
S.S, 13.5 Ltrs with lid
Safe light X-ray dark room:- Size: 5” x 7”
Cassettes X-ray
Size: 8"x10",
Size: 10" x 12"
Size : 12" x 15"
Lead Apron:-Full front side
Intensifying screen X-ray
Size: 8"x10",
Size: 10" x 12"
Size : 12" x 15"
Half Blockers :- Size 8" x 10", 10" x 12", 12" x 15"
X-Ray Adoption Google
X-Ray Lead Markers
40
40
Processing Tray
X-Ray Film Cutter
X-Ray Film Hangers
Size: 8"x10",
Size: 10" x 12"
Size : 12" x 15
Warranty for 2yrs
3
X-Ray Machine 500 mA with dark room accessories .
TUBE UNIT: manufactured by BEL/Toshiba
HV CABLE: Pair of 6 meter High Voltages Cables.
Sleeving – Straight.
STAND: Floor to Ceiling Stand & with Counter
balanced movement, 360 Degree rotatable;
mounted on floor ceiling rails for convenient
movements.
TABLE: Horizontal Tablewith Motorized Bucky &
Grid with ratio 6:1/5 position manual table
HV TRANSFORMER: Compact Heavy Duty
transformer comprising HV Silicon Rectifiers, HT
Transformer, Filament Transformer, Federal
Bushing all immersed in oil.
GENERATOR: 500mA, 125 KVP Full Wave Silicon
Rectified
X-GENERATOR
for
Radiography,
Fluoroscopy (OPTIONAL) & Spot Filming. As per IS:
7620 Part-I.
RATING: RADIOGRAPHY:
Small Focus: 100mA - 40 to 125KVP
200mA - 40 to 125KVP
Large Focus: 300mA - 40 to 125KVP
400mA - 40 to 125KVP
500mA - 40 to 125KVP
STATIC BALANCER: Phase Reducing Transformer. 50
KVA- 3 Phase Transformer.
ACCESSORIES: Hand switch with Flexible long cord
enables the operator to keep from the Radiation
area during exposure. Aluminum Filters 1.5 mm
COLLIMETER: Light Beam Diaphragm with auto time
cut off.
POWER SUPPLY REQUIRMENT: 400/440V, 3 Phase
50 Hz, 50 KVA.
Dark Room Accessories:X.ray developing tank
20
20
S.S, 4.5, Ltrs with lid
S.S, , 9, Ltrs with lid
S.S, 13.5 Ltrs with lid
Safe light X.ray dark room:- Size: 5” x 7”
Cassettes X.ray
Size: 8"x10",
Size: 10" x 12"
Size : 12" x 15"
Lead Apron:-Full front side
Intensifying screen X-ray
Size: 8"x10",
Size: 10" x 12"
Size : 12" x 15"
Half Blockers :- Size 8" x 10", 10" x 12", 12" x 15"
X-Ray Adoption Google
X-Ray Lead Markers
Processing Tray
X-Ray Film Cutter
X-Ray Film Hangers
Size: 8"x10",
Size: 10" x 12"
Size : 12" x 15
Warranty for 2yrs
ANNEXURE XIII (B-Rev1)
SPECIFICATIONS & DETAILS OF ITEMS
GROUP (B)
Si No
1.
Specification
Color Doppler USG with Servo Stabilizer
Specification (Main Unit)
Imaging Mode: B, B/B Live, 4B,B/M,Color Doppler Imaging,Power
Doppler Imaging,Pulsed wave Doppler,Panaromic VIEW
Scanning Mode: Electronic Convex/Linear/Micro
convex/Endocavity
Gray Scale :256
Display: 15 Inch High Resulation LCD Monitor ,Brightness &
Contrast Adjustable
Probe Frequency:Broad Band Probe with Selectable working
Frequency upto 12 MHz
Probe Connector:2 Active Transducer Connector or More
Dynamic Imaging: Dynamic frequency range 30-200,Multistep
Dynamic Focusing Technology
Focusing Method: Dynamic focusing ,Variable Aperture
Gain Control:
Adjustable
Over all Gain Control,8 Step TGC Continuously
Image Reverse : Left/right/up /Down
Image Magnification:Spot Zoom & Pan Zoom from 0.8 to 9 X
Cine Loop: More than 10000 Frames in B-mode,Cine Length More
than 30 Secs
Image Storage: 320 GB Hard Disc capable of storages 2 Lakhs
Single Frame Images
Connectivity: Full patient Database solution,DVD RW Drive ,2 or
More USB port
DICOM 3.0,AVI,JPG,Video Out Format,
Line Density: Low, High
Edge enhancement: 0-14,1/Step
Gray Scale Map: 8 Types
Qty(Nos)
50
Persistance :8 Steps
Depth: 1 to 35CM( depending on Transducer)
ADJUSTABLE PARAMETERS: gain,Dynamic Range 30-200 in BMode Imaging,1 Key Auto optimization
Tissue Harmonic
Imaging,HPRF,persistence,edge enhancement,Biopsy
Guide Line,Focus Number & Position,With User
define Presets
Diagnostic Mode:
Application Such As
Abdomen,Obstretics,Gynecology,Small
Parts,Vascular,Urology ,Cardiology,,Pediatrics
Systems Upgrade: Flexible Systems Upgrade through Software
Frame Rate : More than 300 F/s
Channel: Digital Channel 10,000 or More
Inbuilt Battery Back up/ Online UPS for scanning more than 30
Mins
Image management Software ,extended FOV at Convex & Linear
Standard Offered: Main Unit with 15 inch LCD Display+2 probe
Connector+1 Convex Probe (2-5 Mhz)+
1
T.V Probe (4-9Mhz) ,
Standard Accessories: 1.Servo Stabilizer input Voltage Range from
90 V to 280 V,
2. B/w Thermal Printer
OPTIONAL Accessories:1)Linear Probe(5-11 Mhz) to be quoted
Seperately
Warranty for 2yrs
ANNEXURE XIII (C-Rev1)
Si No
SPECIFICATIONS & DETAILS OF ITEMS
GROUP (C)
Specification
Qty(Nos)
1
Ventillator (Paediatric & Adult ):Description of Function
ICU ventilators should provide artificial respiratory support
to the critical patients in all the types of Intensive Care Units
with altitude compensation for volume and BTPS correction
for monitoring.
Operational Requirements
It should be microprocessor Controlled ventilator with
integrate facility for Ventilation monitoring suitable for
Pediatric & adult ventilation.
The unit should be compressor based for precise gas delivery
( a turbine / piston/ blower based internal compressor)
Technical Specifications
Hinged arm holder for holding the circuit
Should have Colored Touch screen, 12 Inch or more
It should have inbuilt facility to measure and display
for all patient category ( Pediatric& Adult )
3 waves- Pressure and Time, Volume and Time and
Flow and Time., Co2 and Time
3 loops- P-V, F-V, P-F with facility of saving of 4 Loops
for reference. Also facility to display volumetric
capnography loops.
Graphic display to have automatic scaling facility for
waves, Status indicator for Ventilator mode, Battery
life, patient data, alarm settings, clock etc.
Simultaneous display of SET and exhaled parameter ,
3 waveform and 2 loops and Alarm
Should have Trending facility for 72 hours
Should have Automatic compliance & Leakage
compensation for circuit and ET tube with ET Tube
size and % of compensation
ETCO2 to be quoted as optional accessories as per
available specification.
Should have following settings for pediatric& adult
age groups.
a) Tidal Volume min 20 ml to 1800 ml
b) Pressure (insp) 2- 90 cmH2O
c) Pressure Ramp/ Flow patterns
d) Respiratory Rate 1 to 150 bpm, Insp. Time 0.1 to 9 sec, I :
E Ratio 5:1 to 1:5
e) Insp. Flow ( resultant) 0.3 to 180 LPM, continuous Flow 238pm ( in TCPL ode)
f) CPAP/PEEP 0-45 cmH2O
g) Pressure support 2-80 cmh2O
h) FIO2 21 to 100%
i) Pause Time 0 to 2 sec
50
j) Flow Trigger 0.2 to 12 lpm . Pressure Trigger 0.5 to 15
cmH2O
k) Expiratory trigger or exhalation sensitivity - 5-75-% of flow
Should have ,monitoring of the following parameters
a) Airway Pressure (Peak & Mean)
b) Tidal volume (Inspired & Expired)
c) Minute volume ( Expired)
d) Spontaneous Minute Volume
e) Total Frequency
f) FIO2 dynamic
g) Intrinsic PEEP and PEEPi Volume (or trapped Volume)
h) Plateau Pressure
i) Resistance ( Rinsp&Rexp)& Compliance ( Cdyn&Cstat)
j) Use selector Alarms for all measured & monitored
parameters
Should have following modes of ventilation
a) Volume controlled
b) Pressure Controlled
c) Pressure Support
d) SIMV (Pressure Control and volume control) with pressure
support
e) CPAP/PEEP, PSV + assured tidal volume / guarantee /
volume support
g) Advanced mode like pressure controlled volume
guaranteed / PRVC / AUTOFLOW
h) Non Invasive ventilation ( NIV Mode )
i) Additional mode advance ASV / NAVA / MMV+ PSV /
j) APRV
k)Special Neonatal modes - Yime cycled pressure limited
with continuous flow (TCPL) , SIMV +TCPL + PSV, N-CPAP(
with continuous flow) , PRVC,APRV,and above mentioned
mode
Should have Apnea /backup ventilation. Back up
mode should user adjustable and bi directional (auto
switch over from spont. to control and vica-versa
Expiratory block should be autoclavable and no
routine calibration required
Should have monitoring of the following parameters
a. Intrinsic Peep & Intrinsic PEEP Volume (Trapped Volume)
b. Occlusion Pressure( P0.1) , Max Inspiratory pressure (Pi
max)
c. Non-forced Slow Vital Capacity , physiologic Dead space,
RSBI, Imposed work of Breathing ( WOBi), Expiratory Time
constant ( Tcexp)
d. Facility to calculate lower and upper inflection point ( P/V
Flex points)
e. Facility for ET Tube compensation with tube diameter (
4mm onward) and % of compensation and Patient circuit
compensation
Should have integrated Nebulizer with capability to
deliver fine particle size of to be used in line orOn
line
Should have Ideal Body Weight facility
Should integrated Battery backup for minimum 1
hour for main unit as well as for the compressor
RS 323C interface for communications with
networked devices.
System Configuration Accessories, spares and
consumables
ICU Ventilator with trolley - 01
Humidifier -Servo controlled fisher and Paykel MR
850/MR810 with digital monitoring of inspired gas
temperature -01.
All other standard accessories and consumables should be
provided free of cost within the warranty and CAMC period.
Inlet requirement
Power input to be 220-240VAC, 50Hz
Gas input( air and oxygen) - 50-100 psi
The machine and compressor should be US FDA and
European CE Certified.
Warranty for 2yrs
ANNEXURE XIII (D-Rev1)
SPECIFICATIONS & DETAILS OF ITEMS
GROUP (D)
Si No
1
Specification
Qty
Ventilator (Neonatal):Dedicated neonatal ventilator
General Requirement
Should be able to ventilate patients with body weight from
400 grams to 20 kg
Should have battery back-up for the ventilator as well as
compressor for a minimum of 60 min operation
Should have high resolution screen with colour display of at
least 10 inches screen size
Should have an integrated electronic blender for blending
Air & Oxygen
Should have based on external/ internal compressor
Should have US-FDA and European CE certification for
neonatal use
The flow sensor should be reusable and autoclavable and
should be located proximal between the Y piece and
Endotracial tube. Flow sensor should have replacement
warranty.(optional)
Should have device checking mechanism where it can
determine and display the compliance and resistance of the
system, determine leakage in the patient hose system and
checking of valves, gas supply system, flow sensors etc
Should have an automatic leak compensation facility that
provide sensitive triggering even with changing ET-Tube
leaks
Ventilation Modes required:
Invasive ventilation:
a) Pressure limited: SIMV, Assist control/SIPPV, Pressure support
(PSV), Apnea back up ventilation
b) Should have volume targeting or volume assured or volume
guarantee function in all pressure limited modes to ensure a preset
tidal volume delivery by varying the peak pressure or inspiratory
time.
Non Invasive ventilation: N- CPAP and NIMV
Should have apnea backup facility with backup settings
configured for neonates.
should have setting for HFOV MAP 0-30 cmH20, Frequency
5-15 Hz, Amplitude 0-100 % ,o Inspiration time – 33 % to
50 % adjustable,
Waveforms and loops:
Scalar graphics - for pressure, volume and flow; scale
should be user selectable and adjustable for neonatal
settings
Loop Graphics - for pressure volume, flow volume, pressure
flow combinations; scale should be user selectable and
adjustable for neonatal settings
Should have freezing and measuring facility for loops and
30
curves. Freeze and Analysis cursor in all loops
Facility of moveable cursors to read numeric values at any
point on the loop where the cursors is kept
Should have adjustable inspiratory flow patterns from
square wave, sinusoidal and decelerating wave
Ventilator Parameters and settings:
Should have knobs for setting following parameters - Peak
pressure ( 5-60 cmH2), Positive end expiratory pressure
(PEEP- 0-30 cmH2O), Respiratory rate ( 0-200 bpm),
Inspiratory rate (o.1 to 2 sec) & Expiratory time( 0.1 to 10
sec)/automatic , Oxygen concentration (in 1% increments
or decrements), tidal volume ( 2 ml - min150 ml)
Should be able to monitor the following parameters : Peak
pressure, PEEP, Mean airway pressure (MAP), Respiratory
rate, FiO2, Minute volume, Tidal Volume (Inspired &
Expired, Leak percentage), Resistance, Compliance
Should have following settings and ranges:
a) Inspiration time: 0.1 - 3 sec
b) Expiration time: 0.1 - 10 sec/automatic
c) Respiratory rate up to 300 breaths per minute in conventional
modes
d) Flow: Preset patterns - Square, Sinusoidal, decelerating
e) PEEP: 0 - 30 mbar/cmH2O
f) Inspiratory pressure: 5 - 50 mbar/cmH20
g) Tidal volume: 2 - 150 ml
h) Proximal flow trigger facility with a trigger sensitivity of at least
0.21/min
i) Oxygen concentration (FiO2): 21% to 100%
Display:
Inspiratory time %
Ventilator rate
Mean airway pressure
Inspired oxygen concentration
Tidal volume & Minute ventilation
Trends of set and measures parameters with a trend memory of at
least 24 hrs.
Leak percentage
Display of silenced alarms
Alarms Limit: Should have visual as well as audible alarms with
user adjustable alarms levels with text message for:
Power failure
Circuit disconnection
low tidal volume
Minute volume
Tidal volume
Peak Pressure
PEEP
Mean airway pressure
Patient disconnection
Gas failure
Low & High FiO2
Power Supply: 220 - 240V and 50-60 Hz
Miscellaneous:
Complete unit should be mounted on a sturdy pedestal
trolley with good quality castors for easy movement of the
complete ventilator. At least 2 of the four wheels should be
lockable.
Each unit should have a circuit hanger to support the
patient circuit
Each unit should be supplied with a heated servo controlled
MR850 humidifier with Fisher &Paskel reusable neonatal
breathing circuit.
Nebulizer: Should be inbuilt and preferably volume
compensated with a time - programmable flow mechanism
to de-activate nebulizer
Manual oxygen key while suction; user adjustable oxygen
concentration delivery while this manual mode is operated
Should have an adjustable mechanism relief valve for
excess pressure
Should be able to connected to central air line via and
external compressor so that the compressor automatically
switches ON when air pressure in the central line drops
below the recommended level
Should be able to connected to central O2 line
Each unit should come with 1 set of standard oxygen & Air
hoses with hose connectors
Standard accessories and consumables to o be provided free of
cost during warranty and CAMC
2
Warranty for 2yr
Transport Ventillator.:The portable ventilator is used to transport a patient with artificial
respiration support for all patient category (Adult & pediatric)
Operational Requirements
The portable ventilator should be light weight( <12 kg or
better)
Should be based on IPPV time cycled and portable, light
weight.
Should(electronically
controlled
and
pneumatically)/microprocessor driven.
Should be able to work both with cylinders and pipeline,
connectors and high-pressure tubing of appropriate length
to be supplied.
Technical Specifications
20
Should have venture /jet mixing- technology air - oxygen
mixture
Should have following modes of ventilation:
IPPV or control/Assist-control, Pressure Support +PEEP,
Apnea back up
should have facility to be used non -invasively
Should have following settings
a. TV 50 – 1800ml or better
b. PEEP/CPAP 0-20cmH2O
c. Respiratory Rate 1 to 60bpm
d. I: E ratio 1:1.5 (inspiratory time 40% of breathing cycle)
e. FiO2 21%-100%
f. pressure support level 0-50 cmH2O
Trigger Sensitivity - Pressure 1 to 5 cmH2O
Should have airway pressure monitoring
Should have Audio-visual alarms for
a. Low supply pressure
b. High/low airway pressure
c. Gas Supply
d. Power failure
e. Apnea
f. Low battery
Battery back -up for minimum 5-6 hour or better
Should fix, on rails of transport trolley and on stand with
wheels.
Power supply unit / battery charging unit
Power supply cable for 12 V DC
Environmental factors
The unit shall be capable of being stored continuously in
ambient temperature of 0 -40 C and relative humidity of
15-90%
The unit shall be capable of operating continuously in
ambient temperature of 10 -40deg C and relative humidity
of 15-90%
Power Supply
Power input to be 220-240VAC, 50Hz
Standard accessories and consumables to o be provided free of
cost during warranty and CAMC
Warranty for 2yrs
ANNEXURE XIII (E-Rev1)
SPECIFICATIONS & DETAILS OF ITEMS
GROUP (E)
Si No
Specification
1
Binocular Microscope (Electric) : Binocular Compound Microscope with Infinity Optical
Qty
100
System (IOS)
Illumination: Koehler Illumination system with Built-in
6V-20W Halogen with intensity control regulator.
Focusing Module: COAXIAL coarse & fine focusing
mechanism, with tension control ring. Ergonomically
designed for easy grip, esp. for tension control.
Nosepiece: Inward Tilt Low friction & fully Parfocal
Quadruple Revolving nosepiece (Ball bearing type).
Viewing Head: Siedentopf Binocular tube, inclined at
30° rotatable through 360° with IPD 48-75 mm and
Dioptric adjustment. Anti fungus treated
Stage: Double layer graduated mechanical rectangular
stage size 142 x 133mm cross travel 75 (X) x 50 (Y) mm
on ball bearing co-axial controls spring clip double
specimen holder Condenser
Moveable ABBE Condenser, NA 1.25 with aspheric lens.
Iris diaphragm special day light blue filter in holder
Objectives
IP series DIN Infinity Plan Achromatic, Anti fungus
treated objectives:
4x/0.10, 10x/0.25, 20x/0.40, 40x(SL)/0.65, 100x(SL,
Oil)/1.25
Eyepieces: Wide Field eyepiece WF 10x/18mm paired
with eye guards Power Input 220V AC, 50Hz as per ISO
9001, CE standards.
Standard Accessories: Packed in Moulded Styrofoam
box with: Operation Manual, Cleaning Cloth Dust cover
Warranty for 2yrs
2
Haemoglobinometer : Fast & precise measure of Hemoglobin and Hematocrit
in whole blood.
Should have an option of Hematocrit value in case of
normal Hb limit
Measurement at two wavelengths, 570 nm & 880nm
The machine should have an option of setting the cut
off range of flag the extremely higher and lower values.
Should have user friendly Graphical Touch Screen
Panel.
Analyzer automatically stores up to 100 results with
date, time and sex
Automatic self-test
Measuring range 0-256 g/L (0-25.6 g/dl,0-15.9 mmol/L)
Measuring time- Less than 60 secs
Analyzer should have in-built re chargeable battery
with 3100 hrs back up.
4Quality control Curvettes to be provided for QA.
147
P5C and printer connectivity option
Calibrated against the international reference method
for heamoglobin determination.
Warranty for 2yrs
3
4
Glucometer with 100 Strips: Biosensor/ Electrochemical, Glucose Oxidised (GOD)
method
Sample type should be fresh whole blood (capillary).
Primary site should be finger tips and alternative site
should be Forearm & Palm.
Hematocratic range is 30 – 55%.
Individually foil wrapped test strips/ strips in vial
packshould be available – each strip should be
protected from contamination, oxygen, high
temperature and high humidity to ensure stability and
high performance.
Wide range operation temperature. The temperature
detection and compensation feature should allow
ranges of 10-45°C. Operating humidity range is 10-90
%.
Meter should include lithium battery life up to 1000
measurements.
Glucose test range from 20 – 600 mg/dL.
Great Data Management. Meter should record up to
300 tests with time, date. Test averaging 7,14,30 days
average.
Extended expiry period for strips up to approximately
24 months
End fill strips with wicking action should make blood
application as easy as touching the strip to the sample,
along with fast sip-in action.
Sample just 1µl.
Test results should be able to be obtained in only 10
seconds.
Code chip should allow for automatic calibration.
Meter automatically should powered on or off after
test strip inserted/ removed.
Beep sound should occur to notify the user when test
strip inserted, sufficient blood sample is applied and
when testing is completed.
Results should be plasma equivalent which can be
compared directly with lab analyzer results if required.
Warranty for 2yrs
Water Bath: With electronic control , LED Display,
100
234
Button to set nominal value in 0.1ºC.
Temperature Range 5°C above ambient room
temperature to 100 ºC,
External W : 500 X D: 250 X H: 300 mm (approx)
Bath Capacity: 20 Ltrs (Approx)
Temperature Accuracy: + 0.1 ºC
Body of the equipment should be of material which is
rust free from both inside and outside.
Warranty for 2yrs
5
Hot Air Oven: Size: 45 x 45 x 45 cm
Door/Shelf: Single Door with 2 shelves constructed
To give uniform and adequate sterilizing temperature
Range adjustable up to 200 ºC with digital temperature
Display, stainless steel and rust free.
Material: Door fitted on heavy brass chrome plated
hinges
Cabinet: Cabinet double walled mild steel
Insulation: Minimum Thickness 5 cm of glass wool
Finish: Inside the cabinet heat resistant finish and
Outside durable, rust free
Air Circulation: Ventilated with internal fans to assist
Circulation of air
Warranty for 2yrs
234
6
Lab Incubator: Incubator Bacteriological (Memmert type) reliable day
to day operation in variety of uses. Drying of slides,
paraffin embedding, tissue culture work, incubation of
antibody
test,
excellent
for
Microbiological
determinations, crystallization studies and Incubation
of hydroxy steroids.
Construction :–
With double walled construction with complete inner
chamber made of Anodized Aluminum or Highly
Polished Stainless Steel. Outer chamber is made of
Mild Steel Sheet, finished with powder coated paint.
75 mm gap between the walls is filled with special
grade glass wool for proper insulation and to avoid
heat losses. Inner chamber fabricated with ribs for
adjusting shelves to convenient height.
Supplied with 2 or 3 removable shelves. SHELVES made
of fully Anodized Aluminium Sheet or Polished Stainless
Steel Sheet as per chamber.
Door insulated & fitted with heavy hinges. Door Double
glass window which facilitate inspection of samples
234
without opening the door. Heating elements, made of
high grade imported nichrome wire are put inside the
porcelain beads and placed at the bottom and side ribs
for uniform temperature all over the space.
Temperature Control: – by imported capillary type
thermostat from ambient to 80°C. Temperature control
knob graduated in centigrade degrees after actually
observing the temperature in steady state. fitted an Lshaped prismatic glass
Thermometer on top of the Incubator for reading the
chamber temperature.
With Ventilation: – Control Panel having a thermostat
control knob, ON/OFF switch and two pilot lamps.
Power Requirement: – Supplied with cord and plug
suitable to operate on 220 V single phase, 50 Hz, AC
supply.
Size
of
inner
chamber:–
Inner Chamber W x H x DS.S. (304 grade)
455 x 605 x 455 mm
Filled with Air Circulation Fan
Warranty for 2yrs
7
Domestic Refrigerator:Capacity
Gross
Total : 195L
Refrigerator : 195L
Net
Total : 185L
Refrigerator : 185L
Physical Specification
Weight
Net : 37kg Gross : 41kg
Dimension
Net (WxHxD) : 534 x 1,250 x 540mm
Net Case Height with Hinge : 1,250mm
Net Case Height without Hinge : 1,250mm
Net Depth with Door Handle : 540mm
Net Depth without Door Handle : 540mm
Performance
Energy consumption
255 watts
Warranty for 2yrs
48
8
Vibration free refrigerator with servo voltage stabilizer: Suitable for the primary requirements of every blood
bank and hospital, to preserve and secure the vital
supply of blood, plasma and other blood derivatives
Mounted on a study angle frame the inner chamber is
made up of S.S. and outer of M.S. duly enamel painted.
The temperature should be maintainable at 4° C to 6° C
for storing blood bottles or blood bags. Temperature
should be controlled by Solid State Digital Indicatorcum-controller which triggers the Audio Visual Alarm in
the event of fluctuation exceeding permitted tolerance.
Unit should also fitted with door operated alarm and
power supply failure alarm, as a safety device. Drawers
are to be provided for 85 bags. The refrigerator should
be vibration-free and supplied with servo voltage
stabilizer.
Warranty for 2yrs
40
9
Semi Auto Analyzer :Specifications: LIGHT SOURCE: Quartz-halogen lamp 12V-20W
WAVELENGTH RANGE: Automatic by 12 position filter
wheel/static photometer, 6 standard interference
Filters; 340-620 nm,+2 optional position (Max-8filters)6
positions for optional Filters.
PHOTOMETRIC RANGE: -0.1 to 2.3 Absorbance.
DETECTOR: Photo Diode (320 – 1000 nm)/Filters
BLANKING: Automatic zero setting.
OPERATOR INTERFACE: Membrane keyboard for direct
function and alpha-numeric entry, Optional external
keyboard, High contrast graphical LCD display. Real
time clock, 24 hours system.
LANGUAGES: English.
MEASUREMENT PROCEDURES: Kinetic with linearity
check, Kinetic with linearity check, Sample slope blank,
two point kinetic with or without Reagent blank, End
point with or without reagent blank, Bichromatic end
point with or without reagent blank, End point with
sample blank & with or without reagent Blank.
MULTIPLE TESTING: Up to 9 replicates, Means, SD and
CV/repeat measurement by Red Keys & quality control
with Mean SD.
MEASURING TIME: Programmable, 2 to 999 seconds
for kinetic & two point type of tests, For end point fixed
at 2 seconds.
DELAY TIME: Programmable, 0 to 999 seconds/5999seconds
50
METHOD PARAMETER SETTINGS: Method name,
Measurement mode, Wavelength 1 & 2 Aspiration
volume, Measurement delay, Measurement Time,
Factor, Concentration standards, Reagent blankly/n
Sample blank y/n, Units of results, Levels for flagging,
Sample blank y/n, Units of results, Levels for flagging,
CALIBRATION: Factor, one point, two point, multi point.
Automatic on 1 standard (linear Mode), Automatic on
up to 10 standards (nonlinear mode).
QUALITY CONTROL: Two controls per test, QC survey
for ast 30 control measurements, Levey Jennings plot,
High/Low flags.
KINETIC MEASURING TIME: Programmable, lowest 30
seconds.
TIME: Programmable, lowest 30 seconds.
TEMPARATURE CONTROL: By means of Peltier
elements, fixed temperature at 37 degree C
ASPIRATION SYSTEM: Internal pump of bellows
type/peristaltic Type, driven by stepper motor, back
panel Connection for waste, aspiration volume
programmable.
Back panel Connection for waste, aspiration volume
programmable.
Back panel Connection for waste, aspiration volume
programmable.
POWER REQUIREMENTS: 100 – 240 VAC nominal,
50/60Hz.
Battery back-up to retain data.
Warranty for 2yrs
10
11
Electricentrifuge, table top :-Analog/Digital type
The centrifuge should be suitable for medical &
institution Lab
The equipment is to be provided with speed regulator
Digital timer with a range of 0-59 minutes an d easy lid
locking switch etc
General Purpose Laboratory Centrifuge
Speed Range,3500-5300rpm
Max. Capacity 300 ml
To be quoted with all optional accessories.
Warranty for 2yrs
Micropipettes:Single
Channel
a. 10µl – 100 µl
b. 100 µl - 1000 µl
c. 5 µl – 50 µl
Variable
volume
Micro
pipettes
154
234
234
8 Channel Micropipette
a. 10 µl – 100/200 µl
b. 100 µl – 300 µl
Warranty for 2yrs
ANNEXURE XIII (F-Rev1)
SPECIFICATIONS & DETAILS OF ITEMS
GROUP (F)
Si
No
1
Specification
Radiant Warmer :-
Qt
y
50
OPEN NEWBORN CARE SYSTEM ON TROLLEY,WITH RADIANT
WARMER, OXYGEN-PROVISION
Technical Specifications:
Mobile newborn resuscitation table with fixed-height radiant
warmer
Antistatic castors, 2 with breaks
Table surface with mattress, head up/down facility, X-Ray
cassette holder.
Mattress-padding: foam density approx. 21 - 25 kg/m3
Mattress cover should be sealed and waterproof.
Side rails allow for mounting of accessories with SS Height
adjustable infusion rod.
Hood suspended above the table integrates heating element
and overhead spot light
Integrated support for two 10 L oxygen bottles
Heating element: Ceramic heater - 650 W (lifelong warranty)
mounted in parabolic reflector and protected by metal grid
Control unit allowing air and skin temperature preset (LED
indicator) and drives radiant heater output (Skin Servo OR Air
control OR manual mode)
Integrated timer: 1 to 59 min, with count-up and count-down
feature
Temperature range, skin: 34 to 38°C (user pre-settable)
Monitoring of skin temperature by means of sensor, range:
30 to 42°C
Heater output: 0 to 100% in increments of 5%
Control unit: audiovisual alarms according to timer and
temperature preset avoiding overheating
Should be able to display reports systems errors, sensor
failure with message on LCD.
Power requirement: 220 V/50 Hz
Power consumption: 800 W
2
Should be supplied with:
1 x spare skin temperature probe (including connection cable)
2 x empty 10 L oxygen cylinders
1 x spare set of fuses
User manual with trouble shooting guidance, in English.
Technical manual with maintenance and first line technical
intervention instructions, in English
List of priced accessories
List of priced spare parts
List with name and address of technical service providers in India
Warranty for 2yrs
PHOTOTHERAPY UNIT, SINGLE HEAD, HIGH INTENSITY :Technical Specifications:
Heavy sturdy mobile stand phototherapy unit
50
Antistatic castors, 2 with breaks
Head height adjustable, approx.: 0.95 to 1.40 m
Blue light, 4 Compact Fluorescence Tubes (CFL), approx.: 20
W
White light, 2 Compact Fluorescence Tubes (CFL), approx.: 20
W
Tubes are to be protected by grill
Irradiance at skin level, > 25 uW/cm2/nm
Wavelength: 420 to 500 nm, with highest intensity at 470 nm
Integrated cumulative Dual Digital timer for Tube light usage
and Patient
Power requirement: 220 V/50 Hz
Power consumption: 250 W
Should be supplied with:
2 x spare blue CFL tubes
1 x spare white CFL tube
1 x spare set of fuses
User manual with trouble shooting guidance, in English
Technical manual with maintenance and first line technical
intervention instructions, in English
List of priced accessories
List of priced spare parts
List with name and address of technical service providers in India
Warranty for 2yrs
3
Oxygen Concentrator: With in-built oxygen purity sensor.
If the oxygen purity comes down below 85% audio visual
alarm gets activated.
Oxygen Concentrator to provide oxygen from air with Oxygen
purity monitor.
Sound Level < 47 Db with best quality superior grade
molecular sieve, maintenance free
Oxygen purity not less than 90-96% with oxygen output 5 Ltrs
per minute and pressure 8 Psi minimum. With double outlet
and oxygen tubes of 2 mtrs length. 2 Humidifier Bottle & 2
Cabinet filter.
Power Requirement 220V/ 50Hz.
Supplied with:
1 Spare set of tubing
1 x spare internal & external bacterial filter
1 x spare set of fuse.
User Manual with trouble shooting guidance in English
Technical Manual
Warranty for 2yrs
50
4
Infantometerplexi, 3½ft/105cm: Portable baby/infant length- height measuring system
Measures laying length of neonates and babies
Reads in centimeters and inches
Minimum graduation: 1 mm
Long-lasting hard-wearing ruler/graduation is fully integrated
with device
Measuring slide/wedge glides smoothly and close via ruler,
avoiding reading parallax
Measuring slide/wedge wobbles max 2 mm, over full length
No sharp edges or corners
Long stable board, width: ca 30 cm
Length, measurement range, approx:min100 cm
Head/footplate, board and slide/wedge should made of
quality laminated wood or plastic
Wood parts should be treated and finished/protected with
varnish to prevent chipping of edges and allow easy cleaning;
all connections should screwed/nailed plus glued
Warranty for 2yrs
50
5.
Electronic Baby Weighing Machine 10 kg <5g> : Electronic scale for weighing babies with Polycarbonate Pan
Measuring range 0 to approx. 10 kg
Minimum graduation: 5 g
With tare function
On switch and auto-off
Auto-calibration with each switch-on
Large LED display readable in low light working situations,
display cover durable plastic
Display in kg and lbs., easy switch between kg and lbs.
Reading time max 5 seconds
Zero weighing adjustment
Temp Hold Facility
Smooth
surface/finishing
allows
for
easy
cleaning/disinfection.
All vital parts made of rust proof materials
Horizontal leveling with height adjustable feet
Splash proof and shock resistant light-weight body
Power requirements: 220 V / 50 Hz
Supplied with:
1 x spare set of fuses
User manual with trouble shooting guidance,
in English
Technical manual with maintenance and first
line technical intervention instructions, in
English
Warranty for 2yrs
50
6
7
8
Pulse Oxymeter (Baby): Should have facility to display PR & SpO2 as standard
parameter and within built rechargeable battery backup of at
least 2 hours of operation.
Color TFT display of size 4 inch or more
Should have reliable and proven SpO2 technology to sense
the SPO2 in hypotensive, shivering & motion condition,
facility
Should be able to store & display at least 24 hrs of trends
Suitable for monitoring adult, Pediatric & neonatal patients,
able to give visual & audible alarms
Should have low battery indicator
Should have optional CNS connectivity
Should have Real Time clock
Warranty for 2yrs
50
Syringe Infusion Pump : Fully Microprocessor controlled
Mains cum battery operated with built in battery and charger
Should accept syringe size from 10ml to 60ml
Should have Micro mode and continuous injection mode
should be compatible with all major Indian and Foreign brand
syringes
Should have flow rates from 1ml / HR to 1200 ml/HR
Should have high accuracy
Should have adjustable bolus facility
Bolus rate up to 1000ml/HR with 50/60ml syringe
Should have 3 level occlusion pressure setting
Should have audio visual alarm
Should have battery backup up to 4 Hrs.
should have anti reverse function to prevent upstream
should have double CPU to ensure safety and reliability of
infusion
Warranty for 2yrs
C-PAP :Should be suitable for neonatal patients.
Should provide flows of a heated and humidified Air and O2
mixture under controlled pressure, by water and bubble
column, providing a Continuous Positive Airway Pressure in
non-invasive mode. Should have good quality calibrated
blender for mixing of Air and Oxygen US FDA approved. It
should have digital temperature indicating with at least 10
heating levels. Humidifier should have water level sensor with
audio visual alarms and pressure relief valves. When an
occlusion pressure occurs in the inspiratory branch, the circuit
relief valve should limit the pressure excess in the line. It
50
50
should be designed to operate with a pressure of 17cmH2O at
flow of 5L/min.It should have O2 and Air pressure regulator
valves with manometer to control the input pressure up to
3.5Kgf/cm2 and to protect the patient circuit. Blender output
should be equipped with a flow meter. Should have relief
valve to guarantee pressure to the system. Delivery system
should have maximum input flow of 15l/min. CPAP pressure
minimum should be 0 to 10 cmH2O. FiO2 concentration
should be adjustable from 21% to 100%. All parts should be
managed on a strong trolley type stand along with an IV pole.
Temp. sensor which is to measure the temp. of the humid air
should not be more than 2 inches away from the patients
nostrils. The supply should be made with 5 kits with the
BCPAP. The delivery kit should contain all the consumables
needed for BCPAP.
All standard accessories and spares to be provided free of
cost during warranty and CAMC period
Warranty for 2yrs
9
Baby Incubator:-
50
The unit shall be useful for treating premature an low birth
weight babies.
The salient features to include maintenance and control of
temperature and Humidity in the baby compartment for safe
neonatal care.
The design to incorporate all controls include microprocessor
based servo controller for temperature control and to have
digital display on the front panel, with dual colour digital
display for Skin and Air temperature indication separately.
Temperatures setting from 30ºC to 39.9ºC.
The unit shall be incorporated with all he safety features on
any malfunction or emergencies like power failure, High
temperature etc.
The mechanical features should include clear canopy for
visibility with front door opening and four port holes all over
for easy handling of the baby in the canopy, flat perplex base
without any dents for easy cleaning and disinfection control
to be provided with a large mattress platform ,suitable to tilt
a desired angle, built in X-ray cassette tray.
The unit shall be mounted on a trolley fitted with suitable
castors with breaks for the mobility and to have utility
drawers for storing the emergency kits, baby needs and
accessories.
Warranty for 2yrs
10.
Nebuliser : Nebulizer Nebulization Rate: 3cc H20/8-11 minutes.
50
Maximum Compressor Pressure: 25 psig by relief valve
setting.
Maximum Operating Pressure : 11-15 psig
Free Air Flow: 10 lpm.
Compressor Type: Piston
Electrical Requirements: 230V , 50 Hz-0.7 amps
Power Consumption : 70 watts
Weight: 1.3 kgs
In built thermal fuse for optimum safety
Warranty for 2yrs
ANNEXURE XIII (G-Rev1)
SPECIFICATIONS & DETAILS OF ITEMS
GROUP (G)
Si
1
Specification
Shadow less Light min 19” dome. : Lamp mounted on four legs heavy duty base fitted with
75mm dia castors
Qty
50
2 Halogenbulbs of 24V – 50W/LED BULBS are used. 1 for main
and other as backup
Light Intensity 90000 lux +/- 10%
Color Temp 4300 k
Light field diameter 120mm or more
Dome Diameter MIN19”
Power Supply AC 220-230V/50-60 HZ
Warranty for 2yrs
2
3
4
Feotal Doppler should be portable with a carry bag
should be able to work on mains as well as on 9volt single
battery
should have ear phone facility
should have heart beat indicator
should have totally soft touch panel
should have battery indicator
Should possess low battery indicator
Electric Suction Machine: Suction machine foot cum electric model with 2 separate
suction systems, electric & cabinet made of mild steel epoxy
powder coated, with 2 vacuum gauges 700 mm/Hg
Volume: 25-30 Ltrs/min (Jar Capacity 3 Ltrs), 2 graduated
polycarbonate suction jars each of 1.5 ltrs capacity self
sealing rubber lids with synthetic rubber lids, long pressure
tubing, heavy vertical foot pump, vacuum control , automatic
overflow cut off device, mounted on 4 rubber castors.
Sound: 45 db A+ 3
As per ISI Marked No. IS: 4533, SS Top, Epoxy Powder Coated
Finish
Warranty for 2yrs
ECG Machine with adult, paedeatric and neo natal leads:Technical Specification of Three Channel Automatic ECG
Three Channel ECG Recording with interpretation
Last Memorized ECG recording & additional copies available.
Automatic and Manual recording modes.
Dual Power Supply: Mains and battery Operation.
Thermal Printing on 50 mm paper.
Compact design, light weight& portable.
Digital Display
50
100
100
Warranty for 2yrs
5
Ceiling OT Light (shadowless)
The multi – reflector shadow less ceiling Lights should be
used halogen/LED lamps with heat observe filters to give
100
“cold” with light, which should be ideal for modern surgeries,
Technical Data
Intensity (In Lux): - min130,000
Colour Temp.: - 4300K
Halogen Bulb: - 7 x 24V-50W/7X12V-50Watt
Light Field Diameter: - 120mm or more
Dome Diameter: - 710mm
Input Voltage: - AC 220-230/50-60HZ
Warranty for 2yrs
6
Boyles Apparatus with vaporiser and standard accessories
The Anesthesia Machine should be of min. 2 Gases with 2
tubes Hypoxic Guard Including Circle Absorber. Machine must be made of rigid & electro statically powder
coated steel with antistatic Castors with front brakes.
Machine should be equipped with min.2 Nos. High Pressure
outlets for driving ventilator.
Machine must have Oxygen Flush with 32 to 59 LPM flow or
better.
The machine must have flow meter for oxygen and nitrous
oxide supply with adjustment controls. Oxygen Flow meter
can be calibrated from 100 ml to 8 Liters and for Nitrous
Oxide from 200 ml to 12 liters per min.
Machine should have pneumatically controlled integrated
Hypoxic Guard/ORC ensuring that a minimum range of 25%35% oxygen can be run through the machine as per
requirement (25% can be set) .
The machine must have inbuilt Oxygen Failure Warning
Alarm.
Machine must have a common gas outlet Male and Female
Type, size to specify.
Machine should have provision for connection to pipeline
supply for Oxygen and Nitrous Oxide Supply. Once pipeline
supply is turned on machine should be able to use pipeline
supply and cylinders supply be kept as reserve and incase of
pipeline failure only cylinder supply can be turned on.
Separate indication gauges for Pipeline and Cylinder Pressure.
Machine must have a system pressure relief valve to protect
from backpressure. The valve set at normal pressure of 200
cm of H20.
Provision for mountingmin.2 Nos of Bulk Cylinders on the
extended rear platform & top tray for mounting monitor at
eye level.
Machine has gas specific pin indexed cylinder yokes with
sliding stainless steel clamping bars for easy handling. Two
each for oxygen and nitrous oxide cylinder with 5 liters
capacity.
50
There should be individual pressure regulator on each circuit
output phase of 4 kg/cm² and Capable of delivering low flow
Anesthesia
Provision for mounting of ventilator on the side, writing table
and pre-use operative checklist and two closed drawer for
keeping essential accessories.
Machine must be supplied with twin canister circle absorber.
The absorber has switch control to switch between
Automatic and Manual mode of ventilator.
One Set of Essential Accessories with item wise rate should
be quoted as option without which the quotation will be
rejected.
The supplier has adequate service backup with service,
availability of on-self spares and calibration equipment in
north east.
Vaporizer for Halothane/ Isoflurane to be compulsorily
quoted as optional.
Warranty for 2yrs
7
Defibrillator. Should have Current controlled Biphasic waveform
technology
Should have a facility of at least 100 charge /Discharge of
300j/150charges in a 200joulesin a single charge
Should be equipped with AED with Voice and Visual Prompts
There should be facility of Voice guided CPR(Optional)
At least 24 events storage capacity
Should have a facility of Momentary AED ON/OFF key on
front panel to enter and exit AED mode
Energy selection dynamic range should be up to 200jor above
in AED &Manaul Mode.
Should be able to record ECG before and after shock
Should have thermal printer facility
Should have ECG R wave Synchronous or Asynchronous Mode
Should have charge ready indication with Display and Voice
Command
Should have Adult and Pediatric paddle integrated into Same
Handle (Swipe to Expose)
Warranty for 2yrs
89
8
Surgical Diathermy: Modular design, Integrated Patient Control System (PCS).
Independent activation of mono polar and bipolar output.
Should have time controlled cutting mode
Should allow mono polar cutting and coagulation by using
both foot switching.
Should have bipolar coagulation option.
75
The system should automatically adjust to given tissue
impedances.
Mono polar Pure cut should be suitable for under water
cutting (TURP, TUVP & TCRE) with URO-CUT, which eliminates
lag time in initiating cut especially suited for urological
procedure.
Three Blend – modes (program)
Low Cut – Endocut (Gastrocut) – for G.I Surgery
Should have Monopolar coagulation –Soft mode (lap,
desiccation) Forced mode (Standard), Spray mode (for non
contact large area).
a)Desiccation/Soft – for low voltage soft coagulation suitable
for laproscopic& delicate tissue work.
b)Fulgurate/Forced – non contact coagulation for minimal
smoke generation
c)Spray for non-contact large tissue area coagulation with
minimum depth of necrosis
Should have Bipolar- Micro (for delicate tissue without
charring, adhesion and blanching), Coagulation (high current
low voltage pulsed bipolar, also suitable for vessel sealing
system
Range of accessories should provide extensive selection of
handles for various application e.g. needle, ball, spatula type.
Accessories- Ergonomically designed trolley to house cautery
(Small,. Light and Portable), Monopolar cord (at least 6),
bipolar cord (at least 6) selection of handles, footswitches (all
other standard accessories).
bipolar cord (at least 6) selection of handles, footswitches (all
other standard accessories).
Warranty for 2yrs
9
Fumigation Machine 5 Ltr capacity: Specification: Max. height : 390 mm , Weight : 8.5 kg (Approx.)
Atomizing Capacity : 30-50 ml/min
Should be available with timer.
Warranty for 2yrs
20
10
Horizontal Sterilizer:- Capacity – 600 X 600 X 500mm
Inner Chamber should be made up of thick S.S steel of 304 /
316 quality and jacket is made out of rolled S.S.
Single door should be made of rolled steel lined with S.S.
sheet has radial locking system.
All units is to be hydraulically tested up to 40 psi. The space
between outer cover made of thick rolled steel sheet and the
steam jacket filled with mineral wool. Boiler should make of
thick S.S. sheet and is located under the sterilizer. It should be
20
fitted with water level indicator, safety valve, pressure gauge,
and water inlet and drain valves. Unit to be fitted with lowwater cut-off device and automatic pressure control device.
Fitted with self-locking safety door device.
Two separate valves should be provided for evacuating steam
from inner chamber and jacket, as and when desired. The
sterilization cycle should be controlled through multiport
valve or three-way valve. Fitted with a dial thermometer and
automatic vacuum breaker. To work on 440 volts, 3 phase,
A.C. supply.
Warranty for 2yrs
11
Vertical Autoclave with dressing drum: It is to be used for sterilization under saturated steam
pressure at any selected point between 5 to 20 p.s.i.
(adjustable). Should have double walled units with inner
chamber (Boiler) made of 18 S.W.G. stainless steel and outer
chamber is made of SS sheet covered with S.S. Lid with radial
locking system. Fitted with neoprene rubber gasket, all
systems are hydraulically tested up to 40 p.s.i. as a safety
measure. All autoclaves are to be fitted with standard
accessories such as water level indicator, pressure gauge,
steam release cock, spring-loaded safety valve and heating
element. Should be supplied complete with S.S. basket and
vacuum breaker device, cord and plug, to work on 220/230
volts A.C. Supply. Capacity: 20, 40, 50, ltr. Should be Supplied
with dressing drum.
Warranty for 2yrs
20
12
Examination Light:Description of Function:
Mobile operating light is required for doing surgeries in an
emergency environment and the system can be moved from
place to place.
Technical Specification:
Mobile light for medical examination.
Stand with 5 anti-static swivel castors.
Articulated arm 105 cm, spring loaded, with on/off switch
and integrated transformer.
Arm: Moulded plastic arm.
Dome: Unbreakable poly carbonate dome with reflector.
Dome rotation : 360 degree
Halogen bulb: 12V/50W
Light intensity approx.: 30,000 Lux at 40 cm Natural white
light.
/Warranty for 2years
Foot Suction :-
50
13
50
Max negative pressure valve : > 0.08MPa
Negative Pressure Back-reduction while being closed.
<0.005MPa/10 min
Reservoir Capacity :- 1000 ml
Pedal Pressure : < 245 N
Warranty for 2yrs
14
Patient monitor system: (Should be of modular type and capable of
monitoring adult, pediatric & neonatal patients.)
Monitor should have minimum 12” T.S. display or better.
Should be capable of 6 traces display.
Monitor must be capable of simultaneously monitoring the
Following parameters which should be present as standard:
ECG, NIBP, SpO2, Temperature &Respiration, should have
built in arrhythmia monitoring on all leads.
Inbuilt ST segment analysis and arrhythmia detection for all
the leads should be possible.
Hemodynamic and drug dose calculations should be
available.
Arrhythmia should be grouped based on classifications – and
should show no of arrhythmias occurred.
Respiration should be available with Cardio Vascular Artifact
filter.
ICP monitoring should be possible.
Alarm parameter should flash red in the presence of high
priority
alarms (e.g. ventricular fibrillation and asystole) and flash
yellow in the presence of medium or low priority alarms (e.g.
noisy signal, etc.)
24 hours trend data should be displayed.
All monitors including central station should have similar
user interface for easy usage among all clinicians.
Monitor shall provide the capability to receive and display
real-time waveforms, trended data and alarm status from
other bedside or telemetry units on the patient monitoring
network.
Monitor shall provide the capability to enter patient
information at the bedside or central monitor.
Alarm limit status (ON/OFF) must be indicated on-screen for
each parameter and actual parameter alarm settings must
be displayed on-screen when alarms are on.
Should have internal rechargeable battery with back up of
one hour
Position of the displayed waveforms must be user
configurable.
Waveform color changing should be user configurable.
Monitor shall permit the optional ability to receive and
40
15
display information from other patient devices such as
ventilators, infusion pumps and other standalone devices.
All modules should be compatible with all monitors quoted.
Networking to central station should be possible.
Patient monitoring network shall use standard TCP/IP
protocol and be capable of residing on hospital’s network
infra-structure.
Should be compatible with HIS and should be HL7 compliant.
Accessories and spares
ECG / respiration: 5 lead ECG cable and lead wire set
NIBP: Adult: 1 sizes and Pediatric 1 sizes and neonatal, 1 size
per monitor
SPo2 Sensor: Adult sensor with cable, pediatric sensor with
cable
IBP: Include 10 no’s of disposable pressure transducer with
bracket and interface cable per monitor
Temperature: Skin and nasopharyngeal probes per monitor.
The standard accessories ,spares & consumables should be
supplied free of cost during warranty & CAMC
Warranty for 2yrs
Spot Light
337
Intensity: min 20000 ± Lux
Halogen Bulb: 12V – 50 W
Reflector: Metallic
Warranty for 2yrs
16
Field Type OT Table.: Size 72” X 27” X 30” frame made of heavy tubular steel with
Strong mechanism for height adjustment. Stainless steel top
in Sections. Detachable leg side complete with anesthetist
screen Lithotomic rods with straps & arm rest.
Weight bearing capacity-150 kg
Warranty for 2yrs
50
17
Hydraulic OT Table :
Five Section Stainless steel top S.S. covered base with autolocking Device,
Complete with all standard Accessories including water
proof mattress.
Overall size: 72” x 20” x 32”
Height:- Fixed.
Range of positions:- Straight, trendelenburg& reverse
tredlenburg, chair, lithotomy positions.
Weight bearing capacity min-150kg
197
ANNEXURE XIII (H-Rev1)
SPECIFICATIONS & DETAILS OF ITEMS
GROUP (H)
Si No
1
Specification
Patient's Examination Couch with Foot Step (Single).: Overall approx. size should be 1830mm L x 500mm W x
Qty
100
820mm H. minimum
Fixed upholstered top 50mm thick in two sections.
Body frame work should be made from 20G CRCA sheet.
Couch should be fitted with mild steel legs.
Headrest adjustable by gas spring.
Upper section of box approx. size 1200mm L x 450 mm W
x 610mm H with three sliding drawers with separate
doors.
Sliding foot step under the front side of lower middle
cabinet.
B.P. apparatus tray made of 18G MS sheet of approx. size
350 mm L x 120mm W x 20mm H provided on a swinging
rod rotating through a bush fixed on the body of the
couch. Supplied with Single Foot Step.
All MS parts should be pre-treated in Seven Tank &
Powder Coated.
Warranty for 2yrs
2
Revolving Stool : Overall all height adjustable Approx. Size: 480mm to
670mm H
Tubular four legs base of 25.4 x 18g ERW tube.
300mm dia SS Top Height adjustment by screw
mechanism.
The legs should be fitted with high quality PVC shoes with
nylon reinforcement.
All MS Parts should be 7 tanks Pre-treated & powder
coated & SS parts finished with glossy polish. Minimum
30 mm Cushioned top with waterproof rexine cover.
Warranty for 2yrs
200
3
Invalid Wheel Chair: Should be Folding type, made of mild steel tubular
construction OD 22 mm.
With fixed arm rest and fixed aluminum foot rests with
folding action.
Seat and back rest should be of superior quality
leatherite.
Two rear solid rubber typed bicycle wheel, dia 24 inch
with Self propelling hoops fitted with hand brakes. Two
front swivel castor of 200mm chrome-plated finish.
Warranty for 2yrs
200
4
Stretcher-on-trolley: Made of SS 304 grade SS pipes. Overall approx size:
2130mm L x 560mm W x 810mm H. Frame work should
200
be made of ERW CRCA tubes welded with vertical upright
of 31.75 mm OD x 18G ERW tubes, reinforced at bottom
with 35mm OD x 18G for fitting 150mm dia swivels
castors wheels, all without brake. All horizontal stays
should be made of 25.4mm OD x 18G tube. Stretcher
made of 20 G sheet dished in the middle & supported
horizontally on 25.4mm OD x 18G tubes. Three additional
25 x 5mm flat supports welded to support MS sheet top
from underneath widthwise. Pushing handle at both ends
shall be made of 25.4 mm x 18G SS tube. Four stump legs
of 25.4mm x 14G ERW tube should be welded at the
bottom of the stretcher frame. Should be fitted with PVC
or synthetic material having Nylon reinforced. All MS
parts should be 7 tank pre-treated & Powder Coated.
Warranty for 2yrs
5
6
Dispensing Table : MS Frame with SS top.
powder coated
Warranty for 2yrs
216
180 X 60 X 46 cm, Epoxy
Instrument Cabinet. : Compact cabinet should be made of 3 sides close MS
Sheet having polycarbonate door panel in the front.
Five adjustable 6.0mm polycarbonate shelves & front
lockable door with 4mm polycarbonate panel
Pre-treated and oven baked finish
Size : (H) 63” x (B) 24” X (D) 18”
200
Warranty for 2yrs
7
8
9
IV Stand: Made of304 Grade SS pipes,
Moulded five-spiked base on 50 mm castors,
304 Grade SS adjustable rod with double hook.
Warranty for 2yrs
Dressing Trolley: Should be made from SS 16SWG pipes having two SS
Machine pressed dipped tops provided with four-side
side railing, holder cage for bowl and bucket, SS bowl
and bucket, push handle, on 10cms castors.
Dimension: 76 L x 46 W x 81 H cms.
Warranty for 2yrs
Hospital Bed with Mattress : Frame should be made of rectangular 16 G CRCA
pipes, 18 G CRCA perforated sheet top, SS head and
200
230
1500
10
foot bows should be fitted with laminated wooden
boards, provided with mattress guard, provision for
fixing IV/Saline rod, pre-treated in 7 Tank hot
processes and powder coated. Dimension: 203 L x 90
W x 60 H cms. 4" Supplied with Foam Mattress
covered with water proof rexine.
Single section Mattress with 4” thick PU Foam of 32
densities covered with PVC Rexine. .
Sealed stitches and water proof zip.
Standard Accessories:
Mosquito net poles set.
Warranty: 02 years
ICU Bed. : Frame made of 16 G CRCA rectangular pipes, 18G
CRCA sheet four section perforated top with backrest, knee-rest, Trendelen-burg's and reverse
Trendelen-burg's position, Hi-Lo (high-low) height
adjustable (positions maneuverable by four separate
screw mechanisms) imported ABS panels/head and
leg bows,Aluminium Collapsible Side Rails, provided
with one number IV/saline rod with provision for
fixing IV/saline rod at four corners of the bed frame,
15 cms diameter swiveling castors which two with
brakes. The bed is pre-treated in 7 tank hot process
and powder coated. Dimension 203L x 90Wx 60-80
HCms (approx.)
Warranty for 2yrs
300
11
Fowler Bed: Frame made of 16 G CRCA rectangular pipes, 18G
CRCA sheet four section perforated top with backrest, knee-rest maneuverable from foot-end by
separate screws, imported ABS panels/head and leg
bows, provision for fixing IV/saline rod at four corners
of the bed frame, provided with mattress guard at
four locations, the rod mounted on 10 cms diameter
swiveling castors which two with brakes. The bed pretreated in 7 tank hot process and powder coated.
Dimension: 203 L x 90 W x 60 Hcms(Approx.)
Warranty for 2yrs
450
12
Semi-Fowler Bed: Frame made of 16G CRCA rectangular pipes, 18G
CRCA sheet two section perforated top with back-rest
maneuverable from foot-end by screw, imported ABS
panels/head & Foot Bows, bed mounted on rubber
stumps, provided with mattress guard on four
450
13
locations, provision for fixing IV/Saline rod. The bed
pre-treated in 7 tank hot process and powder coated.
Dimension: 203L x 90 W x 60 H cms (Approx.).
Warranty for 2yrs
Bed Side Locker: Approximate dimension: 16” L x 16” W x 32” H.
Should be made of 20 G MS CRCA Sheet.
Should be Joint less SS top with 3 sides raise edges.
Should have one storage cabinet and one drawer
under the top and space for keeping utilities between
the drawer and cabinet.
Legs should be fitted with 2 non-rusting castors of
50mm dia and 2 PVC Stumps on front side.
2 Rubber / PVC Buffer should be provided at rear side
of the locker.
Pre-treated in seven Tank and Epoxy Powder Coated.
Warranty for 2yrs
1500
14
Foot Step Double: Overall Approx. size: 510mm L X 300mm W x 230/450
H
First Step height should be 230mm approx.& second
step size 450mm approx. step should be made of 18G
CRCA sheet. Welded on MS. Tubular frame of 25.4mm
x 18G fitted with aluminum treated flats of size:
500mm L x 32mm W x 3 mm thick, fitted by aluminum
pop rivet. The legs should be fitted with high quality
PVC shoes with nylon reinforcement. All MS parts
should be 7 tank pretreated & powder coated.
Warranty for 2yrs
200
15
Mayo's Instrument Trolley. : Overall Approx. Tray Size: 560L x 400W mm
Should be Adjustable height of tray Approx. 760 x
1270mm through gear handle
Frame work should be made of 50 x 30 x 1.22 mm
rectangular M.S. Tubes.
Vertical Tube should be made of 50 mm x 50 mm x
1.22mm MS Tubes.
Tray should be made of 0.9mm thick S.S. 304 Grade
sheet.
Tray frame should be made of 9mm SS Rod
Trolley should be mounted on 50mm dia non-rusting
castors
MS Parts should be pre-treated in 7 tanks and
powder coated.
1000
Warranty for 2yrs
16
17
18
19
Instrument Trolley. : Should be made of SS 16 SWG pipes/ 20 SWG two
shelves, provided with three-side side railing on top,
having four side-railing on bottom self, on 7.5cms
castors. Dimension: 60L x 46W x 81H cm.
Warranty for 2yrs
Labour Table : Overall Approx. Max. Size 72” x 27” x 30”
Frame work should be made of 31mm x 18G and
supporting tubes made of 25mm x 18G S.S. Tube
Leg should be fitted with PVC Stamps.
3 Section Top should be made of Bakelite sheet.
Back rest section should be adjustable on ratchet
mechanism.
Leg end section should be slide under the main
section by smooth mechanism
The entire table top gives trendlenburg position by
screw system.
Should have Height adjustable a pair of leg holders
with straps.
Complete with self-locking traction handle at side, SS
IV Rod and foam mattress.
MS Parts should be pre-treated in 7 tanks and powder
coated.
Warranty for 2yrs
Bed side screen-3 Fold: Overall Size : 1680mm L x 2450mm W
Tubular frame work should be made from 19mm dia x
1.2mm ERW CRCA tubes.
Legs Base should be made from dia 25.4mm x 1.2mm
tube ERW CRCA Tubes Fitted with 50mm dia nonrusting castor. Middle panel should be 1220mm and
side panels 610mm each side. Should have curtain
hooks and wire.
Warranty for 2yrs
Oxygen Cylinder Trolley. : Should be suitable for 10 liter gas cylinder.
MS tubular frame work should be made of approx.
25.4mm x 18G MS Round tube fitted with two rubber
wheels, 100mm dia trolley should have locking
provision made of 5mm x 25mm thick MS Flats.
Trolley should be fitted with MS Base of 16G sheet.
All MS parts should be 7 tanks pretreated & powder
coated.
230
200
100
250
20
Warranty for 2years
Bowl Stand with bowl: Five legs base mounted on 5cms dia castors.
With two approx. 35 cm SS Basin
Frame should be made of SS Pipe & SS rings.
Warranty for 2yrs
224
ANNEXURE XIII (I-Rev1)
SPECIFICATIONS & DETAILS OF ITEMS
GROUP (I)
Si No
1
Specification
Doctor's Table : Size :1200 X 750 X 750 BEECH with 2 drawer hanging
unit, Size: 400 X 400 X 300,
Qty
100
Table Top: Table tops made of 25mm (minimum)Prelaminated particle board of E-1 Grade Conforming to IS :
12823 of desired color with PVC edge banding. All
exposed edge sealed by 2mm (minimum)thick PVC
Imported edge Banding. Table Top Support: 18 mm thick
PLB gable ends & 18 modesty Panel
Warranty for 2yrs
2
Doctor's Chair : Cushioned seat and back.
Pneumatic height adjustable.
Height adjustable and swinging back rest
5 legs chrome plated base with foot ring
Base fitted with 50 mm dia castors
Warranty for 2yrs
100
3
Visitor's Chair : The frame is made out of 25mm thick tube Thermo set
powder coating by epoxy polyester hybrids to a
thickness of 40 – 50 microns after 7 step pre-treatment
processes.
Seat: Made of 12mm thick plywood cushioned with
37mm thick PU foam of density 32.
Back: Made of 10mm thick plywood, cushioned with
25mm
thick
PU
foam
of
density
26.
Fabric: Colour from fabric shade card
Dimensions:
Seat Width: 440mm, Seat Height: 460mm & Seat Depth:
425mm
Overall Height: 810mm & Overall Width: 550mm
Warranty for 2yrs
400
4
Medicine Rack : Should be made of heavy MS Sheet all three sides
Heavy front door frame with glass/polycarbonate panel
Glass shelves removable. Door with lock & key
White Spray Painted
Warranty for 2yrs
Almirah for Medicines : Spray Painted
Should be made of heavy MS Sheet all three sides as well
as front door.
Shelves removable. Door with lock & key
Warranty for 2yrs
Office Table : Size :1200 X 600 X 750 BEECH with 2 drawer hanging unit
Size: 400 X 400 X 300
100
5
6
100
100
7
8
Table Top: Table tops should be made of 25mm
(minimum) Pre-laminated particle board of E-1 Grade of
desired color with PVC edge banding. All exposed edge
should be sealed by 2mm (minimum) thick PVC Imported
edge Banding.
Table Top Support: 18 mm thick PLB gable ends & 18
modesty Panel
Warranty for 2yrs
Office Chair : Nylon base with glass filled Nylon castors gas lift with
100mm travel. Synchronic Tilt Mechanism with Single
Position Lock
Should be Thermo set powder coating by epoxy
polyester hybrids.
Seat should be made out of 4mm & 15mm molded hot
pressed plywood cushioned with high-density premolded foam of 55 – 60 density. Back is to be made out
of mesh back fabric.
Arms – High density height adjustable cushioned
polyurethane – padded arms.
Dimensions:
Chair Height – 900mm to 1000mm, Chair Width –
600mm (Center arm to arm), Seat Height 400mm to
500mm, Arm Height 190mm to 290mm & Seat Depth
550mm
Warranty for 2yrs
Patient Waiting Chair : Waiting area chairs
-Option for 2 or 3 seater
Ergonomically designed seat/back
Twin tube designer under structure
Waterfall seat edge
With/ without arms
Dimensions Width X Depth X Height Seat height
3 Seater
152
46
85
46
Warranty for 2yrs
100
281
ANNEXURE XIII (J-Rev1)
SPECIFICATIONS & DETAILS OF ITEMS
GROUP (J)
Si N
1
Specification
BPMachine(Mercurial)
Qty
688
First grade quality - virgin material used
Purity of mercury 99.99% due to assured triple distillation
process ,0 to 300 mm of Hg scale with elegant finish, fine
numbering and durable background contrast paint for clear
visibility
Fused type, permanent graduation marking on the glass
tube
Special control valve for perfect pressure drop
Best quality cuff for getting excellent grip
Surface plating adapted to all exposed metal parts to
prevent corrosion
Classic Hi-stove painting to the body of the instrument to
withstand in any climate
Optimum damping effect provided for easy and fast
measurement
Warranty for 2yrs
2
Weighing Machine (Adult) : Size: 30 x 23.5 x 5.5 cm
Capacity: 125 x 0.5 kg
Weight: 2.2 Kg
Smartly Styled Scale with unique sunken lens
Should have latest comfortable ‘Feet Positioning ‘design
with centre parting height weight chart.
Required registration from the Legal Metrology, Weights &
Measures for both the manufacturer as well as dealer.
Warranty for 2yrs
688
3
Weighing Machine (Baby cum Child): Weights & Measures sealed, with separable baby tray,
Epoxy powder coated. with S.S. Pan, capacity 15kg X 50gms
Required registration from the Legal Metrology, Weights
&Measures for both the manufacturer as well as dealer.
688
Warranty for 2yrs
4
Thermometer: Oral use with ISI mark
Yellow- state of art of thermometer
Yellow capillary/glass tubing
Range: 35ºC to 42ºC(94ºF to 108/110ºF)
Packing: Blister Pack
1500
Warranty for 2yrs
5
Stethoscope:-
1500
Combined Adult and Pediatric Aluminum anodized finished
Chest piece.
Ultra-Sensitive Diaphragm for greater amplification.
Colour coordinated Non-Chill bell and Snap On.
Ring to retain diaphragm for patient comfort.
Complete with an accessory case containing.
2 spare diaphragms and one set of ear tips.
Extra-thick tubing walls minimize extraneous noise.
Includes ID Tag.
Warranty for 2yrs
6
7
8
X -Ray View Box : X-Ray View Box Double Film with two tubes and epoxy
powder coated deluxe.
Warranty for 2yrs
Autoclave IS Mark No. 8462 with dressing drums: Portable vertical sterilizer autoclave seamless made out of
thick high quality stainless steel sheet, deep drawn to
cylindrical shape, having no joints and welding, seamless
construction which shall allow no bacteria residue and free
from dirt accumulation.
Size: 350 mm diameter x 300-325 mm height.
Dressing drums ISI Mark No. 3831, without any joints.
Size: 225 x 225 mm
240 mm
Warranty for 2yrs
Electric Sterilizer Seamless shell, with automatic lifting handle with
tray all supplied with power cord.:Specifications:a) Electric Sterilizer – Big
–Should be IS : 5022–1989
Made of Seamless S.S. Sheet of grade-304 (18 Cr-8 Ni).
Suitable for 220V, 50 Hz, Single Phase, AC Supply.
L: 510, W: 200, H: 150mm, Power: 2.00 Kw
b) Electric Sterilizer – Medium
–Should be IS : 5022–1989
Made of Seamless S.S. Sheet of grade-304 (18 Cr-8 Ni).
Suitable for 220V, 50 Hz, Single Phase, AC Supply.
L: 430, W: 200, H: 150mm, Power: 1.50 Kw
c) Electric Sterilizer – Small
–Should be IS : 5022–1989
Made of Seamless S.S. Sheet of grade-304 (18 Cr-8 Ni).
Suitable for 220V, 50 Hz, Single Phase, AC Supply.
688
132
100
L: 400, W: 150, H: 125mm, Power: 1.00 Kw
Warranty for 2yrs
9
Oxygen Cylinder B Type with flowmeter and wrench.: The oxygen cylinder should confirming to IS : 7285 (Part 1) –
2004 and with appropriate valves confirming to IS: 32242002 for Medical oxygen gas service Cylinders subjected to
hydrostatic stretch test at pressure of 250 Bar as required
under rule 35 of the Gas Cylinder Rules , 2004.
10 ltrs water capacity. Supplied with Flow meter and
wrench.
Warranty for 2yrs
Kidney Tray SS.:Kidney Tray SS.As Per IS: 3992-1982 (Heavy Quality)
Size: 250 x 100
300 130
Warranty for 2yrs
100
11
Instrument Tray with cover SS.:Instrument Tray with cover SS Seamless IS 3993-192.The
finished thickness should not be less than 0.5 mm.
Size: 350 x 250 mm
450
300 mm
Warranty for 2yrs
100
12
Needle Destroyer-cum-Hub Cutter : Compact Device that fits easily on the desktop.
Portable, safe and cost effective system which creates save
environment for Doctors, Nurse, Pathologist, Healthcare
professionals and patients.
Cutter: Very high grade imported steel which does not rust
or becomes blunt even after long use.
Body should make up of ABSplastic which avoids rusting
and electric shock.
Electrodes should be copper electrode Nickle plate.
Temperature: Burningdeg.c should be 1600c.
Steel Grade should be SS316L which can cut syringe hub
and burn needle approx. 25000 pcs to 28000pcs and life is
2-years minimum.
Supplied with Removable discharge tray for easy disposal
of needle ash and syringe hubs.
Power consumption of continuous rating in use should be
60w.
Shock proof ,fuse protection having, OFF & ON switch.+
100
10
Warranty for 2yrs
100
13
Instruments for Normal and Epistomy Delivery :-
100
Vaccum extractor, Maelstrom :- 1
Forceps obstetric, Wrigley’s, 280 mm, stainless steel :- 1
Forceps, obstetric, Barnes-Neville, with traction, 390mm:1
Forceps, sponge holding, straight 228 mm, stainless steel:4
Forceps, artery, Spencer-Wells, straight, 180mm-ss :- 2
Forceps, artery, Spencer-Wells, straight, 140mm-ss :- 2
Holder, needle straight, Mayo-Hegar, 175 mm-ss :- 1
Scissors, ligature, Spencer, 130 mm, stainless steel:- 1
Scissors, episiotomy, angular, Braun, 145 mm, stainless
steel:- 1
Forceps, tissue, spring-type, 1 x 2 teeth, 160 mm-ss :- 1
Forceps, tissue, spring-type, serrated ups, 160mm-ss :- 1
Catheter, urethral, rubber, Foley’s 14 ER :- 1
Catheter, urethral, Nelaton, set of five (Fr 12-20) rubber:1
Forceps, backhaus towel -130 mm-ss :- 4
Speculum, vaginal, Sim’s, double-ended # 3-ss:- 1
Speculum, vaginal, Hamilton-Bailey :- 1
Warranty for 2yrs
14
15
16
Wall Clock :
Around 8 inch diameter-Round type
Having pointer for second, Analog Type.
Warranty for 2yrs
Nitrous Oxide Cylinder 5 Ltrs: Brand New High Pressure Seamless Cylinders for Nitrous
Oxide Gas, duly filled with gas, ‘A’ type.
Having water Capacity 5Litres, Cylinders should be “ISI”
Marked, Conforming to IS: 7285 Specification,
Fitted with Pin Index flush type Valve, painted as specified
under Gas Cylinders Rules 1981.
Warranty for 2yrs
Oxygen Cylinder A Type: Brand New High Pressure Seamless Cylinders for Oxygen
Gas, duly filled with gas ‘A’ type.
Having water Capacity 5Litres, Cylinders should be “ISI”
Marked, Conforming to IS: 7285 Specification,
Fitted with Pin Index flush type Valve, painted as specified
under gas cylinders rules 1981.
Warranty for 2yrs
500
2000
2000
17
Instrument for C-Section and other operations.:A)Delivery Kit
Trolley, dressing carriage size 76C, long x 46 cm wide and 84 cm
high.
Ref. IS 4769/1968 1 1Pc.
Towel, trolley 84 cm x 54 cm 2Pc
Gown, operation, cotton 1Pc
Cap. Operation, surgeon’s 36 x 46 cm 2 2Pc
Gauze absorbent non-sterile 200 mm x 6 m as per IS: 171/1985
2Pc
Tray instrument with cover 450 mm (L) x 300 mm (W) x 80 mm
(H) 1 Pc
Macintosh, operation, plastic - 2Pc.
Mask, face, surgeon’s cap of rear ties: B) Beret type with elastic
hem 2pcs ,
Towel, 2 pcs
gloves 3 Pairs
Cotton wool absorbent non-sterilize 500G 2Pc
Drum, sterilizing cylindrical – 275 mm Dia x 132 mm, ss as per IS:
3831/1979 2Pc
Table instrument adjustable type with tray ss 1Pc.
107
B)Episiotomy kit
Vacuum extractor, Malastrom 1 1
Forceps obstetric, Wrigley’s, 280 mm, stainless steel 1
Forceps, obstetric, Barnes-Neville, with traction, 390mm 1
Forceps, sponge holding, straight 228 mm, stainless steel 4
Forceps, artery, Spencer-Wells, straight, 180mm-ss 2
Forceps, artery, Spencer-Wells, straight, 140mm-ss 2
Holder, needle straight, Mayo-Hegar, 175 mm-ss 1
Scissors, ligature, Spencer, 130 mm, stainless steel 1
Scissors, episiotomy, angular, Braun, 145 mm, stainless steel 1
Forceps, tissue, spring-type, 1 x 2 teeth, 160 mm-ss 1
Forceps, tissue, spring-type, serrated ups, 160mm-ss 1
Catheter, urethral, rubber, Foley’s 14 ER 1
Catheter, urethral, Nelaton, set of five (Fr 12-20) rubber 1
Forceps, backhaus towel -130 mm-ss 4
Speculum, vaginal, Sim’s, double-ended # 3-ss 1
Speculum, vaginal, Hamilton-Bailey 1
107
C)Forceps Delivery Kit
Forceps, obstetric, Neville-Barnes, W/traction 390 mm 1
Hook, decapitation, Braun, 300 mm, stainless steel 1
Hook, crochet, obstetric 300 mm, Smellie, stainless steel 1
Bone, forceps, Mesnard 280 mm, stainless steel 4
Perforator, Smellie, 250 mm, stainless steel 1
Forceps, cranial, Gouss, straight, 295 mm-ss 1
107
Cranioclast, Braun, stainless steel, 365 mm long 1
Scissors ligature Spencer 130 mm, stainless steel 1
Forceps sponge holding, 22.5 cm straight – ss 1
Forceps, tissue, spring-type, 1 x 2 teeth, 160 mm, stainless steel
1
Forceps, tissue, spring-type, serrated tips, 160 mm-ss 1
Forceps, artery, Spencer–Wells, straight, 180 mm-ss 2
Forceps, artery, Spencer-Wells, straight, 140 mm-ss 2
Forceps, scalp flap, Willet’s 190 mm –ss 4
Forceps, Vulsellum, duplay double curved, 280 mm-ss 4
Forceps, Vulsellum, duplay double curved, 240 mm-ss 1
Catheter, urethral, 14 Fr. Solid tip, one eye, soft rubber 3
47 Holder, needle, Mayo-Hegar, narrow jaw, straight, 175 mmss 1
Speculum vaginal bi-valve, Cusco-medium, stainless steel 1
Speculum, vaginal sim’s double-ended, size # 3-ss 1
Forceps, Backhaustowel, 130 mm, stainless steel
Warranty for 2yrs
18
Neonatal Resuscitation Kit : Infant Resuscitator with 250 ml Silicone Bellow, pressure
release valve
Silicone Face Mask (Anatomical): Autoclavable&
reusable in sizes 00, 01
Foot Suction: Compact, lightweight, easy to handle and
operate, Durable rubber bellow,
Long lasting stainless spring to provide friction free
pumping
Completely Autoclavable polycarbonate vacuum jar with
lid (500ml capacity), Scratch
Proof power coated frame
Laryngoscope: Stainless Steel Straight blades of Size 0& 1
No.
Silicone airways: Autoclavable and reusable in Size 000&
00 No.
Warranty for 2yrs
50
19
Vacuum Extractor
Should consist of 03 stainless steel/plastic (autoclavable) cups, rubber
pressure tube, suction pump, traction handle, glass jar fitted with
vacuum gauge and control valve. Should be supplied in a carrying case.
Warranty for 2yrs
50
20
Oxygen Cylinder A Type with Humidifier:Brand New High Pressure Seamless Cylinders for Oxygen Gas,
duly filled with gas ‘A’ type.
Having water Capacity 5Litres, Cylinders should be “ISI” Marked,
1000
Conforming to IS: 7285 Specification,
Fitted with Pin Index flush type Valve, painted as specified
under gas cylinders rules 1981.
Warranty for 2yrs
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising