Product Reference Guide Product Reference Guide 2009

1006.0830

KaVo Dental - Gendex Imaging

Via Alessandro Manzoni, 44

20095 Cusano Milanino (MI)

• Italy

Tel. +39 02 61 800 81 • Fax +39 02 61 800 809

www.gendex-dental.com - www.kavo.com

Product

Reference

Guide

2009

Gendex. Imaging Excellence

It has been just over a century since Wilhelm

Conrad Roentgen's discovery of the X-ray in

1895. Since then, radiology has transformed from a scientific curiosity to a medical and dental necessity. The Gendex lineage can be traced back to Roentgen's time and extends to today, where Gendex is an international leader in dental radiology and digital imaging.

Victor Electric was founded in 1893 in Chicago and was one of the earliest X-ray equipment supplies worldwide. Victor Medical manufactured a variety of electro-therapeutic devices and became a successful business. The company was absorbed by General Electric in

1926 and became part of the GE Medical business unit.

The dental radiology division of GE Medical eventually became an independent corporation called Gendex in 1983. In 1991, Gendex purchased the European business of Philips dental X-ray operation, further strengthening the company's position as a world leader in dental X-ray. In June 1993 Gendex merged with

DENTSPLY International.

In 2004 Danaher Corporation, a Washington DC

Company, bought the Gendex Division from

Dentsply International.

Later that year, Danaher acquired Kaltenbach and Voigt (KaVo). Gendex became part of the

KaVo Dental family, creating the ultimate equipment solution provider for dental professionals.

2

Product Reference Guide 2009

Table of contents

3-D Imaging

GXCB-500

Panoramic X-ray

Orthoralix® 8500

Orthoralix® 9200

Orthoralix® 9200 DDE

Digital Imaging

VisualiX® eHD Intraoral digital sensor systems

DenOptix® QST Phospor plate scanning systems

Intraoral X-ray

Expert DC Intraoral systems

Oralix AC Intraoral systems

Intraoral Cameras

AcuCam® Concept IV FWT Camera system eZ1 Camera system

Software

VixWin™ Platinum Software

VixWin™ DICOM

Developers

Clarimat 300 Film processor

Technology explained

Installation requirements and dimensions

General Sales and Warranty conditions

Data subject to change without prior notice.


66

68

70

78

88

62

64

65

52

54

58

42

44

46

26

28

34

10

12

14

16

4

6

3

Reach the depth with 3D!

In dentistry, it is getting every day more and more important to enhance the way you see your patients: the 3rd dimension allows you to create anatomically accurate treatment plans, leading to successful surgical procedures and to an overall increase of patient care quality.

The CBCT (Cone Beam Computer Tomography) is the latest technology that puts advanced in-office imaging within those practices, that want to place themselves at the centre of patient care: provide a complete range of services, from diagnosis to treatment, but delivering less dose than a medical CT.

4



5

6

GXCB-500

Enter a New Digital Dimension with Cone Beam 3-D Imaging!

The Cone Beam Volumetric Tomography and Panoramic system for dental applications.

Features

Standard “Jaw” Scan (8 cm diameter x 8 cm height) to support implant planning, endodontics, and surgeries

Extended Diameter Scan (14 cm diameter x 8 cm height) to assist with TMJ evaluation and airway analysis

Fast 8.9 second scan in Standard mode

360 degree scan to capture oral and maxillofacial features

Cross-sectional slices of desired location in the maxilla or mandible

No distortion or magnification to reveal critical anatomical details

Traditional digital panoramic images

Seated patient positioning to minimize movement

Full 3-D reconstruction of anatomy in less than 20 seconds

Under 20 MB standard file size

Easily share 3-D data and images with other clinicians

Amorphous Silicon Flat Panel Sensor for 3D and 2D acquisition

i-CATVision™ software included (freeware)

DICOM 3 compatible for third-party applications

Compact footprint

CE 0413 Medical device conform to the directive 93/42/CEE


GXCB-500

Cone Beam Volumetric Tomography and Panoramic Dental Imaging System.

Standard (8 cm x 8 cm) and EDS (14 cm x 8 cm) scan mode

Traditional digital panoramic images

Workstation included

Available versions

The following versions are available:

English 1.006.7684

French 1.006.7682

German

Italian

1.006.7680

1.006.7681

Portuguese

Spanish

Swedish

1.006.9841

1.006.7683

1.006.9840


7

Components & Accessories

Carbon Fiber Head Rest

Head Rest for patient positioning

Part Number 1.005.8620

Chin Cup

Chin Cup to facilitate the correct positioning of the patient


Foot Rest

Foot Stool to stabilize the feet of children or shorter adults


Booster Seat

Booster seat to align properly the children


iPAN Head Holder

Head support for Standard Panoramic


Chin Rest

Chin Rest for Standard Panoramic


Bite Tip Holder

Bite Tip Holder for Standard Panoramic

(package of 2 pieces)


Bite Piece

Bite Block for Standard Panoramic (25 pcs)


Velcro Head Restraint Kit

Head strap for head stabilization


Head Restraint Band

Disposable band for Velcro Head Restraint



8


GXCB-500 configuration

Projections

Standard Scan

Extended Diameter Scan iPAN Mode

Accessories

Carbon Fiber Head Rest

Chin Cup

Foot Rest

Booster Seat iPAN Head Holder

Chin Rest

Bite Tip Holder (package of 2 pieces)

Bite Tip (package of 25 pieces)

Velcro Head Restraint Kit

Head Restraint Band (package of 50 pieces)

Patient E-stop

Control Box

Pan Phantom

Phantom Assembly

QA Phantom

Water Phantom Jar

Chin Rest Slide

Foam Disk

Position Alignment Tool

Acquisition Computer

Operator's Manuals

Imaging software

standard optional


9

A perfect mechanism

In a panoramic exam the image is created by the movement of the radiation source in any direction of the X-Ray plane. This makes it possible to obtain optimized radiographs of a practically elliptical structure, like the dental arch is.

The capability of the system to follow a trajectory which fully represents the dental arch is an essential element to avoid alterations.

All the Gendex pan systems have been developed paying particular attention to this point, by the means of a multi-motors articulated kinematics which makes possible the optimum execution of all the projections with maximum reliability, accuracy and simplicity.

10



11

12

Orthoralix

®

8500

Highest image quality…within everyone’s reach

Panoramic radiographic system with double-speed motorized column, 3 axes-kinematics unit with control of movements by microprocessor.

Features

High performance DC X-ray generator, high frequency with 0.4 focal spot

Radiographic imaging through traditional film cassette or latest generation CCD sensor

Up to 4 computer-controlled motors allow the trajectory to accurately follow the patient’s morphology

Optimized panoramic image reconstruction

2-speed telescopic column

Laser beams enable precise patient positioning

Multiple horizontal beams for immediate setting of the

Frankfurt plane

Lateral positioning devices, handgrip and integrated chin rest allow stable and comfortable pose

Unit-Mounted control panels

Easy to be upgraded to digital acquistion of images

Easy and aesthetic integration into every practice



Orthoralix 8500 DDE

Direct digital panoramic radiographic system

(DDE) with latest generation CCD sensor.

Complete digital operation with a significant reduction of the emitted dose.

Standard and child panoramic projections with constant magnification factor

Immediate connection to the LAN network and immediate access to images on any network PC in the practice

No need for a dedicated PC interface

Imaging software for electronic storage and management of data

Orthoralix 8500 DDE


Orthoralix 8500

Panoramic radiographic system, film based.

Easy to be upgraded to digital acquistion of images with a Gendex sensor (DDE) or by using an indirect digital system with phosphor plate technology (PSP)

Standard and child panoramic projections with constant magnification factor

Orthoralix 8500



13

14

Orthoralix

®

9200

The panoramic and cephalometric system with a wide range of advantages.

Panoramic and cephalometric radiographic system for multiple projections with double speed-motorized column, 3 axes-kinematics unit with control of movements by microprocessor.

Features

High performance, high frequency DC X-ray generator with 0.5 focal spot

2-speed motorized column with slow vertical movement for ‘fine’ patient positioning (2,4 mm/sec)

4 computer-controlled motors allow the trajectory to accurately follow the patient’s morphology

3 Laser beams system, motorized headrest, handgrip and chin rest for precise patient positioning

Advanced Dento-Maxillo-Facial Projections including orthogonal dentition, frontal dentition, frontal sinus, and others

Multiple TMJ projections

Cephalometric projections including latero-lateral, antero-posterior, postero-anterior, submento-vertex, and carpus

Transcan cross-sectional tomography

Automatic Exposure Control (AEC) for panoramic and cephalographic views

Special precision soft tissue filter

One key-one function philosophy features easy to use icon buttons with complete control of all factors and setting

Easy to be upgraded to digital acquistion of images

CE 0086 Medical device

conform to the directive 93/42/CEE


Orthoralix 9200 Plus

Panoramic radiographic system film based for multiple projections of the whole

Dento-Maxillo-Facial area.

Complete imaging programs: basic panoramic radiology, Dento Maxillo

Facial projections and Transcan implantology programs

Automatic Exposure Control (AEC)

Easy to be upgraded with the Ceph arm for cephalometric projections

Orthoralix 9200 Plus


Orthoralix 9200 Plus Ceph


Orthoralix 9200 AEC

Panoramic radiographic system film based with

Automatic Exposure Control (AEC) of exposures for panoramic views.

Complete basic panoramic radiology

Easy to be upgraded with the Ceph arm for cephalometric projections

Easy to be upgraded to special projections

(DMF, Transcan)

Orthoralix 9200 AEC


Orthoralix 9200 AEC Ceph


Orthoralix 9200

Panoramic radiographic system film based for basic panoramic radiology.


Easy to be upgraded to special projections

(DMF, Transcan) and for cephalometric projections (with ceph arm)

Orthoralix 9200


Orthoralix 9200 Ceph



15

Orthoralix

®

9200 DDE

Direct Digital Evolution

Digital panoramic and cephalometric radiographic system with ergonomic CCD digital module unit (DMU), for panoramic and/or cephalometric real time image reconstruction.

Features

3 axes-kinematics unit with control of movements by microprocessor

2-speed motorized column with slow vertical movement for ‘fine’ patient positioning (2,4 mm/sec)

High performance, high frequency DC X-ray generator 0,5 focal spot

Automatic Exposure Control (AEC) for panoramic and cephalographic views

3 Laser beams system, motorized headrest, handgrip and chin rest for precise patient positioning

One key-one function philosophy features easy to use icon buttons with complete control of all factors and setting

Electromechanical coupling/releasing of digital module unit (DMU)

Safety system to avoid DMU accidentally falling

LAN connection


Digital Cephalometric arm

High speed digital cephalometric scanning mechanism

Special precision soft tissue filter for Latero-Lateral view

90 ° of the ceph DMU bay for easier

DMU insertion

16


Orthoralix 9200 DDE Plus

Panoramic radiographic system with CCD sensor of latest generation for multiple projections of the whole Dento-Maxillo-Facial area.

Complete imaging programs: basic panoramic radiology, Dento-Maxillo-Facial projections and Transcan implantology programs

Easy to be upgraded with the Digital Ceph arm for high speed cephalometric projections

Orthoralix 9200 DDE Plus Pan

(with Panoramic DMU)


Orthoralix 9200 DDE Plus Pan C

(with Cephalometric DMU)


Orthoralix 9200 DDE Plus Ceph




Panoramic radiographic system with CCD sensor for basic panoramic radiology.


Easy to be upgraded with the Digital Ceph arm for high speed cephalometric projections

Orthoralix 9200 DDE Pan

(with Panoramic DMU)


Orthoralix 9200 DDE Pan C



Orthoralix 9200 DDE Ceph




17

Orthoralix 9200/9200 DDE radiology programs

Basic panoramic radiology programs

The following basic panoramic programs are included in all the versions of Orthoralix 9200/9200 DDE

Standard panoramic

Child panoramic

Orthogonal Dentition

Half Panoramic

(left and right)

Lateral TMJ

Cephalometric radiology programs

The following basic cephalometric programs are included in all the ceph versions of Orthoralix 9200/9200 DDE

Dento-Maxillo-Facial radiology programs

Specialized programs for Dento-Maxillo-Facial radiology. This option includes a special cephalostat for TMJ imaging.

It includes the following programs:

Latero-Lateral (LL) Frontal TMJ

Antero-Posterior (AP)

Postero-Anterior (PA)

Submento-Vertex (SV)

Carpus

Frontal Dentition

(includes as standard in 9200 DDE models)

Orthogonal Half Dentition

(left and right)

Frontal Maxillary Sinuses

Lateral Maxillary Sinus

(left and right)

DMF option for Orthoralix 9200

(both conventional and digital systems)


18


Cephalometric upgrade Kits

From Panoramic to Cephalometric system

Transcan programs

This option allows cross sectional views of the dental arches. Provides 3 cross-sectional views

(equally displaced 7mm on parallel planes) of the selected area of the mandibula or maxilla.

It includes an impression tray kit and table goniometric support.

Orthoralix 9200 systems

Ceph arm for cephalometric image reconstruction. It includes a flat cassette

18x24 cm provided with Kodak Lanex Regular intensifying screens (rare earths).

Complete cephalometric radiology programs

Transcan option for Orthoralix 9200


Transcan option for Orthoralix 9200 DDE


Ceph arm for Orthoralix 9200


Ceph arm for Orthoralix 9200 AEC/Plus


Orthoralix 9200 DDE systems

(from S/N 03701004)

High speed digital cephalometric arm with ergonomic CCD digital module unit (Ceph) for cephalometric real time image reconstruction.

Complete cephalometric radiology programs

Digital field upgrade kit from Orthoralix 9200 DDE Pan (standard or Plus) to Orthoralix 9200 DDE Ceph (standard or Plus)


Digital field upgrade kit from Orthoralix 9200 DDE Pan C (standard or Plus) to Orthoralix 9200 DDE Ceph (standard or Plus)



19

Components

& Accessories

Free standing base

Free standing base for Orthoralix 8500 systems


For Orthoralix 9200 /AEC /Plus /DPI /DDE /Ceph and for Orthoralix SD/SD2/S/Ceph


Cephalostat for TMJ projections

Auxiliary support for patient positioning specifically developed for lateral and frontal projections of the temporo-mandibular joints.

For the Orthoralix 9200/9200 DDE and for

Orthoralix SD2/S.

Cephalostat for TMJ projections


Radiographic cassettes

Flat cassette 15x30 cm without intensifying screens


Flat cassette 18x24 cm without intensifying screens


Flat cassette 8x10 inch without intensifying screens


Flat cassette 5x12 inch without intensifying screens


20


Flat cassette 15x30 cm with Kodak Lanex Regular intensifying screens


Flat cassette 15x30 cm with Kodak Lanex Medium intensifying screens


Flat cassette 18x24 cm with Kodak Lanex Regular intensifying screens


Intensifying screens

Rare earth intensifying screens 15x30 cm

Kodak Lanex Regular



Kodak Lanex Medium



Kodak Lanex Regular


Rare earth intensifying screens 8x10 inch

Kodak Lanex Regular


A

B

Bite block

Bite block for patient positioning.

Disposable bite guides for Orthoralix 8500

(package of 100 pcs) A


Bite block for all Orthoralix models except 8500

(white version) B



21

Digital upgrade Kits

From Film to Digital system

Hygienic protections

Hygienic bags for Orthoralix ear plugs (280 pcs)


Hygienic bags (100 pcs) for Orthoralix bite block

(transparent version)


Hygienic bags (200 pcs) for Orthoralix bite block

(white version)


From Panoramic Film to Panoramic Digital

Digital field upgrade kit from Orthoralix 9200

Film system to Orthoralix 9200 DDE Panoramic

(from S/N 03701004)

from Orthoralix 9200 or Orthoralix 9200 AEC

to Orthoralix 9200 DDE standard


from Orthoralix 9200 Plus

to Orthoralix 9200 DDE Plus


from Orthoralix 9200 or Orthoralix 9200 AEC

to Orthoralix 9200 DDE Pan C standard


from Orthoralix 9200 Plus

to Orthoralix 9200 DDE Pan C Plus


From Panoramic Film to Digital Ceph

Digital field upgrade kit from Orthoralix 9200 Film system to Orthoralix 9200 DDE Digital Ceph

(from S/N 03701004)

from Orthoralix 9200 (Pan or Ceph) and Orthoralix 9200 AEC (Pan or Ceph)

to Orthoralix 9200 DDE standard Ceph


from Orthoralix 9200 Plus (Pan or Ceph)

to Orthoralix 9200 DDE Plus Ceph


22


Orthoralix 8500 configuration

Projections

Standard panoramic radiology program

Child panoramic radiology program

Accessories

Remote command for X-ray control

Disposable bite guides (package of 100 pieces)

Operator’s and Service Manuals

Wall support

Free standing base

Imaging software

standard optional


23

Orthoralix 9200 configuration

Projections

Basic panoramic radiology programs

Dento-Maxillo-Facial radiology programs

Transcan programs

Cephalometric programs

Automatic Exposure Control (AEC)

Panoramic AEC

Cephalometric AEC

Cassette

Panoramic flat cassette 15x30 cm

Panoramic flat cassette 5x12 inch

Cephalometric flat cassette 18x24 cm

Cephalometric flat cassette 8x10 inch

Intensifying screens

Rare earth intensifying screens 15 x 30 cm (Lanex regular)

Rare earth intensifying screens 18 x 24 cm (Lanex regular)

Accessories


Image phantom

Hygienic bags for bite block (package of 200 pieces)

Hygienic bags for ear plugs (package of 280 pieces)


Wall support

Free standing base

standard optional - not possible

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

24


Orthoralix 9200 DDE configuration

Projections

Basic panoramic radiology programs

Dento-Maxillo-Facial radiology programs

Transcan programs

Cephalometric programs

Automatic Exposure Control (AEC)

Panoramic AEC

Cephalometric AEC

DMU Sensor

DMU Panoramic

DMU Cephalometric

LAN

LAN port

Accessories


Image phantom

Hygienic bags for bite block (package of 200 pieces)

Hygienic bags for ear plugs (package of 280 pieces)


Wall support

Free standing base

Imaging software

standard optional - not possible

-

-

-

-

-

-


25

When the present is no longer enough

During the last decade the evolution of technology has been much stronger than ever before.

Every aspect of our life has been influenced by it and, whatever previously considered as unchangeable, has revealed unexpected and enthusiastic perspectives of change.

Catch this challenge, recognize new opportunities, converse with the future and every limit will be overcome. We are all requested to look forward, and reach the top.

By introducing innovative products in the digital imaging Gendex has accepted this challenge and is giving you the possibility to obtain high professional performances.

26



27

28

VisualiX

®

eHD

Ergonomics and High Definition

VisualiX is the digital intraoral sensor by Gendex based on the CCD (Charge Coupled Device) technology.

It gives the dentist the possibility to produce real time

X-ray digital images of superior quality.

Features

Drop-like shape, smooth edges and round corners follow the anatomical shape of the oral cavity maximizing patient comfort

Unsurpassable quality digital images thanks to the “High Definition” Imaging Technology developed by Gendex that optimizes the efficiency of the image capturing process

Instant acquisition of high quality and accurate digital images with maximum patient comfort

Reduced worksteps during image acquisition due to the auto-trigger feature

USB2 compatible, thus minimizing the time from image acquisition to image appearance on the computer screen

Compatible with all intraoral radiographic systems

Sensor cable lenght 3 m

X-ray dose reduction and certification as a medical class II

A

device according to the directive 93/42/CEE

Two sensor sizes available



VisualiX eHD Universal Size

Direct digital intraoral system with CCD sensor

Universal size (Size 1) for endodontic, implantology and periapical examinations.

Ergonomic sensor with round package and cut corners maximizing patient

comfort

Detects X-ray and acquires the image without activation by the operator

Seamless integration of the system in the practice with plug-n-play (USB) connections

VisualiX eHD Universal Size


VisualiX eHD Large Area

Direct digital intraoral system with CCD sensor

Large Area (Size 2) for bitewing, endodontic, implantology and periapical examinations.

Ergonomic large area sensor with round package and cut corners maximizing patient comfort



VisualiX eHD Large Area


VisualiX eHD Combo

Direct digital intraoral system with CCD sensor eHD Universal Size and eHD Large Area for complete examinations.

Ergonomic sensors with round package and cut corners maximizing patient comfort



VisualiX eHD Combo



29

Components / Accessories

Sensor wall-mounting assembly for eHD sensors

VisualiX eHD sensor mount


Wall mounting assembly for eHD electronic unit

VisualiX eHD wall mounting kit


Aiming device for Gendex's sensors

Positioning device for Gendex's sensors with four different configurations, easily recognizable by their colours: yellow for anterior periapical, blue for posterior periapical, green for endodontics and red for bitewing.

Aiming device for sensor VisualiX eHD


Aiming device for sensor VisualiX 32*, USB, HDI all sizes


* VisualiX 32 is the previous version of VisualiX HDI.

30


Aiming rings*

Anterior (Blue) A


Posterior (Yellow) B


Bitewing (Red) C


Endo (Green) D


Arms*

Anterior (Blue pins) A


Posterior (Yellow pins) B


Bitewing (Red pins) C


Endo (no pins) D


(Package of 1 piece)

(Package of 1 piece)

* These accesories are valid for VisualiX eHD, USB, HDI and VisualiX 32 sensors.

Bite pieces*

Anterior (Blue) A


Posterior (Yellow) B


Bitewing (Red) C


Endo (Green) D


(Package of 3 pieces)


31

Baskets for VisualiX eHD

Horizontal Basket Universal Size (Black) A


Vertical Basket Universal Size (Black) B


Horizontal Basket Large Area (White) C


Vertical Basket Large Area (White) D



Baskets for VisualiX USB / HDI

Horizontal Basket Universal Size (Black) A


Vertical Basket Universal Size (Black) B


Horizontal Basket Large Area (White) C


Vertical Basket Large Area (White) D



Disposable barriers

Disposable barriers latex free for VisualiX

Universal and Large Area sensors



Disposable barriers for VisualiX HDI

Disposable barriers for VisualiX HDI Universal

Size, USB and VisualiX 32* sensor. (package of

500 pieces)


Disposable barriers for VisualiX HDI Large Area sensor (package of 500 pieces)


* VisualiX 32 is the previous version of VisualiX HDI.

32


VisualiX eHD configuration

CCD sensors

Universal size - size 1 (37.5x 25.5 mm)

Large Area - size 2 (40.5x 33 mm)

Aiming device for Gendex's sensors

RINN XCP-DS (1 package)

Accessories

Disposable barriers (package 500 pieces)

Wall mounting kit eHD sensor mount

Imaging software

USB connection cables

Operator's and Service Manuals

standard optional


33

34

DenOptix

®

QST

Quad Speed Technology

The DenOptix digital imaging system is a Photo-Stimulable Phosphor (PSP) Technology based solution that completely replaces traditional film processing equipment and chemicals, allowing you the digitalization of your practice in an efficient and simple way, revolutionizing the way you work. It captures information on storage-phosphor imaging plates and uses its high speed scanner to convert the data into digital images for viewing on a monitor.

Features

Market leading scan speed provides a full-mouth series in as little as 4 seconds per image

DenOptix QST displays 4 bitewings in under

30 seconds

Innovative QST design significantly decreases image plate loading time

DenOptix QST eliminates the cost and time associated with traditional film processing

DenOptix QST significantly reduces patient and staff waiting time

The soft and flexible DenOptix phosphor plates offer ease of use, patient comfort, and proven technology.

Available in all Intra-Oral, Panoramic, and Cephalometric sizes

USB 2 interface



DenOptix QST I/O

The DenOptix QST unit for intraoral images

Intraoral carousel for 39 intraoral images plates: 20 size 2, 9 size 1, 8 size 0, 2 size 3

Provides a full-mouth series in as little as 4 seconds per image

Utilizes multiple film sizes simultaneously

Simple conversion to digital with comfortable, wireless and flexible imaging plates

VixWin imaging software for electronic storage and management of data

DenOptix QST PAN Plus

The DenOptix unit for panoramic and intraoral images

Extraoral carousel for 1 panoramic plate and 7 intraoral imaging plates:

2 size 0, 4 size 2, 1 size 4

Panoramic images can be obtained in less than

80 seconds

The system requires no adjustments to the panoramic exposure settings (kV, mA or time).

The system can be used with almost every existing panoramic unit



DenOptix QST COMBO

The DenOptix QST COMBO unit for panoramic and intraoral images two carousels

Intraoral carousel for 39 intraoral imaging plates: 20 size 2, 9 size 1, 8 size 0, 2 size 3

Extraoral carousel for 1 panoramic plate and

7 intraoral imaging plates

(2 size 0, 4 size 2, 1 size 4)

Utilizes multiple film sizes simultaneously


Panoramic images can be obtained in less than

80 seconds


DenOptix QST I/O Scanner


DenOptix QST PAN Plus Metric format with panoramic imaging plate, 15x30 cm


DenOptix QST PAN Plus Inch format with panoramic imaging plate, 5x12 inch


DenOptix QST COMBO Metric format with panoramic imaging plate, 15x30 cm


DenOptix QST COMBO Inch format with panoramic imaging plate, 5x12 inch


DenOptix QST Ceph:

is obtained from DenOptix QST PAN Plus or COMBO configurations described above adding the

DenOptix QST Ceph upgrade kit (see page 38)


35

Phosphor plates

I/O Imaging plates

Reusable phosphor coated imaging plates (PSP) to capture X-ray emissions with all intraoral radiographic systems. Available to match the sizes of traditional intraoral film.

Size 0 (22x35 mm) package of 2 pieces








Size 4 (57x76 mm) package of 1 piece


Panoramic Imaging Plates

Reusable phosphor panoramic imaging plates

(PSP) for panoramic radiographic system.

Two panoramic PSP available.

Size 15x30 cm package of 1 piece


Size 5x12 inch package of 1 piece


Cephalography Imaging Plates

Reusable phosphor cephalometric imaging plates

(PSP) for cephalometric radiographic system.

Two cephalometric PSP available.

Size 18x24 cm package of 1 piece


Size 8x10 inch package of 1 piece


36


Components & Accessories

Disposable barrier envelops

Disposable barrier envelopes with adhesive strip for protection from cross-contamination.

Size 0 (package of 100 pieces)










DenOptix QST Carousels

Carousels for multi-plate and multi-size scanning.

Three carousels available: for intraoral applications only, for intraoral and panoramic applications, for intraoral and ceph applications.

Intraoral carousel

(holds up to 39 imaging plates)


Extraoral carousel for Pan and I/O imaging plates

(metric and inch)


Extraoral Carousel for Ceph (18x24 cm) and I/O

Imaging plates


Extraoral Carousel for Ceph (8x10") and I/O

Imaging plates


Dark box

Dark box for storage of intraoral imaging plates



37

38


DenOptix QST configuration

Carousel

Intraoral carousel for 8 size 0, 9 size 1, 20 size 2, 2 size 3.

Extraoral carousel for 1 panoramic plate 15x30 cm and 7 intraoral imaging plates (2 size 0, 4 size 2, 1 size 4) -

Extraoral carousel for 1 panoramic plate 5x12 in. and 7 intraoral imaging plates (2 size 0, 4 size 2, 1 size 4) -

Phosphor plates

2 Intraoral imaging plate size 0

8 Intraoral imaging plates size 2

20 Intraoral imaging plates size 2

1 Panoramic imaging plate 15 x 30 cm

1 Panoramic imaging plate 5 x 12 inch

-

-

-

-

Disposable Barrier Envelops

100 disposable barrier envelops size 0



Accessories

Dark box for plate transfer

USB 2.0 connection cable

Imaging software

Operator's and Service Manuals

standard - not included

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-


39

Kerr-Hawe Sensor Holders

Testset Sensor Holder System

It includes: 5 Sensor Holders with Ring

(1 Kwik-Bite Senso, 1 Super-Bite Senso Anterior,

1 Super-Bite Senso Posterior, 1 Endo-Bite Senso

Anterior, 1 Endo-Bite Senso Posterior), 5 Centring

Devices


Assorted Kit Endo-Bite Senso

It includes: 2 Endo-Bite Senso Anterior with

Ring, 2 Endo-Bite Senso Posterior with Ring,

2 Centring Devices


Assorted Kit Super-Bite Senso

It includes: 2 Super-Bite Senso Anterior with

Ring, 2 Super-Bite Senso Posterior with Ring,

2 Centring Devices


Kwik-Bite Senso Standard Kit

It includes: 4 Kwik-Bite Senso,1 Centring Device


Centring Rings

Refill packs of 3


Endo-Bite Senso Anterior

It includes: 4 Endo-Bite Senso Anterior with

Ring, 1 Centring Device


Endo-Bite Senso Posterior

It includes: 4 Endo-Bite Senso Posterior with



Endo-Bite Anterior Centring Devices

Refill packs of 50


Endo-Bite Posterior Centring Devices

Refill packs of 50


Kwik-Bite Centring Devices

Refill packs of 50


40


Super-Bite Senso Anterior

It includes: 4 Super-Bite Senso Anterior with



Super-Bite Senso Posterior

It includes: 4 Super-Bite Senso Posterior with



Super-Bite Anterior Centring Devices

Refill packs of 50


Super-Bite Posterior Centring Devices

Refill packs of 50


Kerr-Hawe PSP Holders

X-Ray Film Holders Test-Set

It includes: 6 Film Holders with Ring

(1 Kwik-Bite,1 Super-Bite Anterior, 1 Super-Bite

Posterior, 1 Paro-Bite, 1 Endo-Bite Anterior,

1 Endo-Bite Posterior), 6 Centring Devices


Endo-Bite - Assortment

It includes: 2 Endo-Bite Anterior with Ring,

2 Endo-Bites Posterior with Ring, 2 Centring

Devices


Super-Bite - Assortment

It includes: 2 Super-Bite Anterior, 2 Super-Bite

Posterior, 2 Centring Devices


Endo-Bite Anterior with Ring

It includes: 4 Endo-Bite Anterior with Ring,

1 Centring Device


Super-Bite Anterior with Ring

It includes: 4 Super-Bite Anterior with Ring,

1 Centring Device


Kwik-Bite with Ring

It includes: 5 Kwik-Bite with Ring, 1 Centring

Device


Endo-Bite Posterior with Ring

It includes: 4 Endo-Bite Posterior with Ring,

1 Centring Device


Super-Bite Posterior with Ring

It includes: 4 Super-Bite Posterior with Ring,

1 Centring Device



41

Capturing precise details

It is a good practice to spend some time walking outside and enjoy the world around us.

But if you do not see besides the appearance, everything becomes soon obvious and boring and you wish to leave it as quick as possible.

The secret is to look carefully into details, this makes every place unique and worthwhile.

The attention for the smallest detail, the accurate exposure techniques, the minimum distortion and shading allow the Gendex intraoral systems to have clear and detailed images, which every professional would appreciate.

42



43

44

Expert DC

High Frequency X-ray system

High frequency DC X-ray system for Intraoral radiography.

Features

0.4 mm: small tube focal spot for maximum detail recognition with minimum distortion

7mA, 65kV DC output: sharpest possible images with optimum contrast

Consistent radiation emission

Accurate, short exposure time for best compatibility with digital receptors

Both short and long cone fully integrated with tubehead for best performance and easy cleaning

Complete and simple control panel one key, one function

Unique QuickSet tubehead controls: easy operating technique changes or verification at any time

Easy customization available: film/digital, cone length setting

Ergonomic tube head design makes positioning easy, accurate and fast

USB 2.0 port for improved workflow with VisualiX eHD sensor from Gendex

Optimized On/Off switch location for greater access

Modern design for improved aesthetics

Plastic clamshell covers for X-ray tubehead

Multiple extension arms for any room layout: 140 cm, 165 cm, 191 cm

Remote control unit or self contained at no extra cost



Accessories

Expert DC

High frequency X-ray system for Intraoral radiography with round BLC (20 cm).

Exposure time range from 0.02 to 2 s.

Setting of the technical factors

(preset or manual).

Quickset system for selecting exposure time directly on the X-ray tubehead.

Control unit to be installed directly on wall by a support or outside the X-ray area.

Expert DC X-ray system, 191 cm useful reach






Beam Limiting Cone

In order to ensure correct alignment, in addition to the 20cm circular shield one, the following collimators are available: circular section (Ø 6 cm) length 30 cm rectangular section (46x36 mm) length 20 cm rectangular section (46x36 mm) length 30 cm rectangular section (37x27 mm) length 20 cm rectangular section (37x27 mm) length 30 cm

Round Beam Limiting Cone, length 30 cm


Rectangular Beam Limiting Cone, size 2, length 20 cm








Hand-switch

Exposure hand-switch with extensible coiled cable

Expert DC Hand-switch



45

46

Oralix AC

Reliability, tradition and quality at the service of dental professional

X-ray system for intraoral and extraoral radiography with two models of microprocessor-controlled dental timers.

Features

Simple and accurate time selection with object programmed electronic timer controlled by a micro-processor

Micro-processor control of the filament preheating time and exposure time

Advanced electronic control: compensation of mains fluctuations, continuous check on operation conditions, self test function for trouble shooting

Multiple system configurations: two types of Beam Limiting Cone with round or rectangular section

Extension arms from 141 cm to 186 cm useful reach

Compatible with all film and digital imaging



Oralix AC Densomat

X-ray system for intraoral and extraoral radiography with Densomat timer.

Exposure time range from 0.03 to 2.5 s

Set-up of speed of X-ray films

Set-up of exposure time by selection of patient size

Set-up of exposure time by tooth type

Digital imaging function

Switch for control of a second tubehead

Possibility to set up exposure time directly

Wall support, 45 cm (141 cm useful reach) or 90 cm (186 cm useful reach) extension arm.

Oralix AC 230V Densomat, round BLC, 141 cm useful reach


Oralix AC 230V Densomat, round BLC,

186 cm useful reach


Oralix AC 230V Densomat, rectangular BLC,

141 cm useful reach


Oralix AC 230V Densomat, rectangular BLC,

186 cm useful reach


Oralix AC Secondent

X-ray system for intraoral and extraoral radiography with Secondent timer.

Exposure time range from 0.03 to 2.5 s

Selector knob with 19 settable exposure times

Wall support, 45 cm (141 cm useful reach) or 90 cm (186 cm useful reach) extension arm

Oralix AC 230V Secondent, round BLC, 141 cm useful reach


Oralix AC 230V Secondent, round BLC, 186 cm useful reach


Oralix AC mobile

Oralix AC intraoral radiographic with round BLC and mobile stand.

Oralix AC 230V mobile system with Densomat timer


Oralix AC 230V mobile system with Secondent timer



47

Components

DENSOMAT Dental Timer

Densomat timer with microprocessor to control the Oralix AC X-ray tubehead. The timer is able to control also a second Oralix AC X-ray tubehead

Flat keyboard for the programmed selection of exposure time based on both teeth and patient size

Numerical-digital indication of the exposure time

Manual setting of the exposure time from 0.03 to 2.5 s.

Setting of the sensitivity of radiographic films

Setting for digital and conventional radiographs

Automatic compensation of mains voltage fluctuations

Automatic control of tube thermal load

X-ray control push button with a 3 m extensible cable

Densomat Dental timer 230V


Optional module for controlling a second tubehead


SECONDENT Dental Timer

Timer Secondent with microprocessor to control the Oralix AC X-ray tubehead

Manual setting of the exposure time from 0.03 to 2.5 s.

Automatic compensation of mains voltage fluctuations

Automatic control of tube thermal load

X-ray control push button with a 3 m extensible cable

Secondent Dental Timer 230V


48


X-ray tubehead

Oralix AC 230V X-ray tubehead

65 kV 7.5 mA

Inherent filtration 2mm Al equivalent

Focal spot 0.7mm (IEC 336/1982)

Grid control

Compatible with round BLC or rectangular BLC

The BLC is NOT included.

Oralix AC 230V X-ray tubehead


Arms

Oralix AC extension arm 45 cm

(141 cm useful reach) or extension arm 90 cm

(186 cm useful reach)

Extension arm 45 cm


Extension arm 90 cm


Articulated arm

Articulated arm for wall mounting


Articulated arm for unit mounting with 5 m cable



49

Wall support

Wall support for Oralix AC


Mobile stand

Mobile self-supporting stand


Beam Limiting Cone (BLC)

Two types of Beam Limiting Cone (BLC) for Oralix

65, Oralix AC: circular section 6 cm, length 20 cm with lead-shielded white body or rectangular section, 35x45 mm, length 20 cm with rotating body

Rectangular BLC for Oralix AC


Round BLC for Oralix AC


50


Expert DC configuration

Arms

Exstension arm 38 cm



Beam limiting cone

Round beam limiting cone length 20cm


Rectangular beam limiting cone length 20cm


Accessories

Exposure hand-switch

User and Service Manuals

Template for timer

Coiled-cord exposure switch

standard optional

Oralix AC configuration

Timer

Densomat dental timer

Secondent dental timer

Beam limiting cone



Accessories

Mobile stand

Wall support

Exposure hand-switch

User and Service Manuals

Template for timer and wall support

standard optional - not available


-

-

51

A picture is worth a 1000 words

Communication has become the milestone of the present society; we all recognize the importance of this tool in every application and new professions have been created to improve the efficacy of the message. But in some cases words are not enough to express our thoughts and an image can help us much more than a speech.

With the Gendex cameras you can further improve the relationship with your patient, placing communication and self-explanatory images side by side.

52



53

AcuCam

®

Concept IV FWT

The diagnostic detail within hand’s reach

The AcuCam Concept IV FWT intraoral cameras have been developed to meet the highest expectations of dental professionals for image quality, ease of use and reliable, long term operation.

Features

Top rated Intra-oral camera

Ergonomically designed handpiece with slim distal end for complete intraoral access

State-of-the-art optical system with an adjustable focus range of 1 mm to infinity

CCD sensor of high resolution

True colour reproduction

Wide angle of view (62 °) and retroflex viewing (97.5°)

Three fixed focus settings-macro, wide angle, close-up and extraoral

Macro focus adjustable to 110x magnification

Image capture through a computer

CE Medical device

conform to the directive 93/42/CEE

54


AcuCam Concept IV FWT

Digital Intraoral camera with FireWire technology.

Ergonomically designed handpiece with slim distal end for complete intraoral access

Best digital image quality and simplest installation and operation with a computer eliminating the need for a video capture board

Compact versatile docking station, with a small footprint, that output digitally directly to a computer system through the fast FireWire or i.LINK connection

(IEEE1394a)

Easily transportable between operatories, thanks to the “Hot Plug” connection, always ready to use

Cable 2 m

AcuCam Concept IV FWT



55

Components

Handpiece

Ergonomically designed for complete intraoral access

Sensor CCD 1/4”

Resolution 80 lp/mm

True colours

Depth of vision from 1 mm to infinity (macro, wide angle, close-up and extraoral)

Material: Stainless steel

Docking Station

The Concept IV FWT docking station can be mounted inside cabinet, under a counter top or on the wall, the mounting bracket is included as part of basic system

Digital output IEEE-1394A, Firewire, i.link

Analog output 480 TV lines

AcuCam Concept IV FWT Docking Station

(without handpiece)


Footswitch

Wired footswitch with two switches for freezing and saving the image on the computer

AcuCam Concept IV FWT footswitch


Concept IV FWT handpiece with cable of 2 m


56


Subsystems

& Consumables

Disposable sheaths

Disposable sheaths for Concept IV FWT (500 pcs)


Accessories

FireWire PCI card for Desktop


FireWire PCI card for Laptop PC



57

58

eZ1

The new easy way to investigate, document, communicate and connect.

Intraoral videocamera that combines the latest video technologies to provide you with an exceptional tool for patient education, case acceptance, and improved patient communication

Features

Innovative "Soft Touch" control area to freeze and capture images eliminates the need for a footswitch

Lightweight ergonomic handpiece

Autofocus adjustment

Activation controlled automatically from the camera holster

No docking station or power supply required

Works with most practice management software

Latest LED technology for bright, sharp images

High Speed USB2 digital connection

Stylish handpiece design

CE Medical device conform to the directive 93/42/CEE


Components eZ1 with USB2 adapter

This system displays intraoral examinations on

Personal Computers using a standard USB2 port.

eZ1 PAL USB2 Camera System


eZ1 with Memory Docking

Station

Intraoral camera with memory docking station

(for connection to TVs).

This system displays intraoral examinations on standard TV sets or S-video monitors.

The docking station is capable of storing 1 full screen image or 4 split screen images.

eZ1 PAL Camera System with Memory Docking


Handpiece

eZ1 PAL Camera Handpiece without cable



59

USB2 Adapter

eZ1 USB2 Adapter


Memory Docking Station

Docking station with onboard memory. It is capable of storing 1 full screen image or 4 split screen images eZ1 Memory Docking Station, 2.5 m


eZ1 Memory Docking Station, 5 m


eZ1 Camera Cable, 2,5 m


eZ1 Camera Cable, 5 m


Holster

eZ1 Holster


60


Acucam Concept IV FWT configuration

Docking station including camera holster

AcuCam Concept IV FWT Handpiece with cable of 2 m

Footswitch for image freeze and grab

Power Supply Module with power cord

Holster long connecting cable

Triple Shielded FireWire Cable

Firewire card for PC

Video Capture Board

Disposable sheaths (500 pieces)

Imaging software

Software Driver CD-Rom

User’s Manual

Mount Template

standard optional - not possible/not applicable

eZ1 configuration

Camera Handpiece with built-in light

USB2 adapter (eZ USB2)

Docking station with onboard memory (eZ MEM) with 2,5 m cable

Handpiece holster

Power supply

2,5 meters linking cable for Handpiece and the eZ MEM

S-Video cable, 1.83 meters (6 feet)

500 disposable barrier sheaths

Software Driver CD-Rom

User's Manual

Dual-Lock pad

standard optional - not possible/not applicable


-

-

-

-

61

-

-

-

-

Enhanced image quality

With the evolution of digital imaging acquisition techniques seen in the recent years, it has become necessary for the dentist to be equipped with a powerful software package that enables efficient and complete image analysis combined with ease of use.

VixWin Platinum has been developed to respond to the needs of the modern dentist with the aim of providing a tool that improves and enhances practice’s efficiency and potential and has been enriched with a series of features serving this objective.

62



63

64

VixWin

™

Platinum

The most advanced release in the powerful

Gendex Imaging Software series!

Powerful diagnostic and time-saving tools for an accelerated and easy workflow with detailed radiographic digital images in any practice.

Features

Innovative icon graphics and customizable Graphical User Interface (GUI) for an Intuitive and User-Friendly software environment

Control, treatment, analysis and saving of X-ray digital images from DenOptix,

Visualix, Orthoralix digital imaging systems

Software is easy to install and can be interfaced with most major practice management software packages

Image analysis tools enhance edge contrast and enable easier and faster image analysis to optimize digital image contrast and quality by easily adjusting contrast, brightness and Gamma values

Tools for geometric measurements

(lines and angles)

Advanced functions to permit an easy and accelerated workflow

CE 0086 Medical Device conform to the directive 93/42/CEE


VixWin Platinum

VixWin Platinum is the general purpose dental and maxillo-facial image analysis and management software developed by Gendex in order to enhance image quality and add diagnostic value to digital images.

It allows capture, display, treatment, analysis and storage of digital radiographic images from

Gendex DenOptix, VisualiX, Orthoralix digital imaging systems. It can also handle other types of images, such as colour images from Intra-oral and extraoral dental cameras (e.g. the Concept

IV and eZ1 series) or from optical scanners and still cameras.

VixWin Platinum works under Microsoft

Windows 2000 and Windows XP-PRO

VixWin Platinum imaging software


VixWin DICOM

VixWin DICOM is a software from Gendex aimed at extending VixWin's powerful applications in a

DICOM Standard environment. It enables the integration of Gendex dental imaging products with the DICOM server allowing easy sharing, distribution and viewing of digital images.

VixWin DICOM is DICOM 3.0 compatible and supports all Gendex products running with

VixWin PRO (ver. 1.2).

VixWin DICOM - 1 licence


VixWin DICOM - 5 licences









65

Perfect development brings outstanding results

To get clear and detailed X-Ray images a good radiological equipment is not enough.

The entire process must be in tune in all its phases from the beginning to the end.

The development of the film is the last step in the whole process but it plays an important role.

Excellent X-Ray images need an adequate development; a good image which is not properly developed can be unusable.

Clarimat 300 automatic film developer grants constant outstanding results and emphasizes the high performance of the radiological unit.

66



67

68

Clarimat 300

Automatic processor for intraoral and extraoral radiographic films

Features

Ease of installation and ease of use

Simple operation: processing involves only pressing a button and placing the film

Automatic operation: simple electronic control of all major functions of the machine, including timing, temperature, circulation and fluid replenishment

Prolonged machine service life: an automatic stand-by facility stops the machine after 8 minutes of working, then maintaining the correct temperature for immediate further use when required

Innovative film transport system: a unique patented film transport system in which film is held stationary between two belts as it travels through the solution, avoiding the risk of mechanical damage

Dedicated chemicals: high quality, specially formulated and produced chemicals for optimum performance and prolonged life.

They are available in a ready mixed solution for use straight from the can

Quick and easy maintenance

Daylight loader


Consumption articles

Clarimat 300

Clarimat 300 automatic developer for Intra-oral, panoramic, and cephalometric radiograph films

(size 24x30 cm max.)

Water feeding with 3/4” connection.

Working times: pre-heating 10-15 minutes, processing time 4 minutes, film loading time 36 seconds (15x30 cm or 24x30 cm;

0.83 cm/s), stand by 8 min after reset of start button.

Supply does not include developing and fixing chemicals.

Clarimat 300 automatic film processor


Clarimat 300 provided with module for automatic reintegration of the chemicals


Consumption articles for

Clarimat 300

Clarimat automatic replenishing module


Day-light loader for Clarimat


Clarimat system cleaner


Clarimat Gendex fast process chemicals.

It includes: 5 l of developing chemicals and 5 l of fixing chemicals



69

Technology explained

70



71

72

CCD sensor

High Definition Imaging Technology

X-Rays

Scintillator

CCD

Detection in a layer of scintillating phosphor coated on the CCD active surface

Integration Read Out

VisualiX eHD is a digital sensor based on the CCD technology that guarantees high image quality and system reliability.

It is designed with a Caesium Iodide scintillator, grown vertically on a carbon layer. The vertical growth process generates a columnar microstructure, which drives light directly on the

CCD surface, reducing loss and guaranteeing unsurpassed image quality.

In addition, to achieve higher resolution images, the pixel size has been reduced to 19.5 μm providing a theoretical resolution of roughly

26 lp/mm.

VisualiX eHD is USB2 compatible, thus minimizing the time from image acquisition to image appearance on the computer screen.

Advantages

Instant imaging

High definition images

Radiation dose significantly reduced

Does not require X-ray hardware modification

Consents better informed clinical decisions

Eliminates the need for chemicals and the dark room

Electronic storage and management of data


PSP technology

Photostimulable Phospor Plate Tecnology

imaging plate

X-rays latent image laser scanning

PSP utilizes reusable phosphor coated imaging plates to capture X-ray emissions. The wireless, flexible PSP plates match the sizes and are positioned in the same manner as traditional film. After an X-ray emission, the phosphor plate captures the intra- or extraoral image.

Using the advanced laser scanning of the

DenOptix QST, the latent image is converted into a highly diagnostic digital image.

This image is optimized using the features and tools of advanced digital imaging software, such as Gendex VixWin Platinum. After scanning, the

PSP imaging plates are “cleared” or “erased” via light for reuse.

For panoramic and cephalometric imaging, the phosphor plate operates in the same manner as existing film but without the need for an intensifying screen.

Advantages

Film-like digital system, without chemicals

Eliminates the need for the dark room

Does not require X-ray hardware modification

Consents better informed clinical decisions

Radiation is significantly reduced

No change of working routine

Electronic storage and management of data photo multipler electrical signal


73

Orthoralix Articulated kinematics

Important findings are adopted for best results:

-Standard form of dentition and mandible for rotational panoramic radiography (DMFR 1989,

Vol. 18, May).

-A method to maintain a constant magnification factor throughout the exposure of rotational panoramic radiography (DMFR 1989, Vol. 18,

November).

Orthoralix operation:

3 robotic stepping motors generate the movements.

X-ray head is completely free to rotate and relocate itself (forward and backward, right and left).

Cassette speed can be modulated (only conventional film systems)

Advantages:

Free movements of the X-ray tubehead allow better focal trough in terms of shape and thickness

Constant magnification factor throughout the exposure

Minimal distortion effect on the images

74


Expert DC focal spot and high frequency

Small focus Large focus

~230V

INVERTER

DC

300 V

object

object

10 kV

VOLTAGE

MULTIPLIER detector detector

65 kV

Small unsharpeness

Large unsharpeness

The small focal spot provides outstanding image quality, which distinguishes itself by unrivalled sharpness, negligible distortion and maximum detail recognition.

DC tubehead

Constant potential output allows excellent gray scale definition with reduced soft radiation imparted to the patient and provides superior diagnostics.

Additionally, 65 kV output provides excellent image contrast.

TIME

AC

AC DC

TIME

35 kV

ENERGY

40 kV


75

Oralix AC technology

ANODE

GRID

CATODE

Oralix tube frontal and side view

Grid action

In the Oralix tube a grid is placed between the cathode and the anode, influencing the movement of the electrons.

By means of the grid action, only the X-rays useful to the image formation are produced, thus allowing a reduction of the X-ray dose given to the patient.

AcuCam

Concept IV FWT technology

Angular field of 62

°

The wide angular field enables up to seven teeth to be included in a single image.

76


Retroflex vision with an a angle of 97,5

°

This unique feature enables the distal surface of the upper molars to be viewed with ease.

Depth of vision

Focal length from 1 mm to infinity. In this way it is possible to film from the patient’s face and smile to the distal surface of his 3 rd

upper molar.

FireWire technology:

FireWire (IEEE 1394A) is one of the fastest data transfer standards ever developed.

Originally conceived by Apple Computers for digital video streaming, FireWire is the de facto industry standard for multimedia peripherals such as digital video cameras. It features simplified cabling, hot “plug and play”, and unsurpassed image transfer speed.

Digitizing the camera signal in the Concept IV

FWT docking station and passing it to the computer via the FireWire connection eliminates the need for a traditional video capture card, that typically degrades the video signal when converting it from analog to digital.

The direct-digital FireWire connection delivers the highest level of clarity and picture quality that makes it great for use with the Concept IV camera.


77


78



79


GXCB-500

Dimensions in mm

Weight 230 kg

1160

90

80

1220


900

Orthoralix 8500/8500 DDE

Dimensions in mm

Weight 115 kg

Orthoralix 9200

Dimensions in mm

Weight 195 kg

250

Weight 215 kg

1341

983

1140

2280 2310

948

25

1220

950

1816

730

500


81

82


Dimensions in mm

Weight 195 kg

250

Weight 217 kg

1270

2280

948

25

2310

VisualiX eHD

Dimensions in mm (IME dimensions)

Weight 300 g (IME and sensor)

149

84

38

DenOptix QST

Dimensions in mm

Weight (empty) 16 kg

880

394

493

1220

950

1770

274


Oralix AC

Dimensions in mm

Weigth: Tube head 6,3 kg (without collimator),

Folding arm 7,5 kg,

Extension arm 3,5 kg (45 cm) 5 kg (40 cm)

Wall support 1,5 kg, Timer 2 kg

-90

°

-135 ° 360 °

+90

°

+135 °

1050 max

550 max

Expert DC

Dimensions in mm

Weight 5,9 kg

380 - 630 - 890

270 °

540 °

1020

330

900

1860 max

920 max

1330 Recommended height

Dental timer

870

365

540 - 740 - 1050

990

125

Recommended height

231

Wall support

171

231

125 97

97

205

365

665 - 915 - 1175


Acucam Concept IV FWT

Dimensions in mm

Weight 1,5 kg

74

165 30

165

eZ1

Dimensions in mm

Weight 200 g (with USB2 adapter)

Weight 410 g

(with Memory Docking Station)

105

51

163

95

39

Clarimat 300

Dimensions in mm

Weight 21 kg

340

500

180

600

83

General Sales and Warranty Conditions

84



85

KaVo General Sales and Warranty conditions for Gendex products

1. General

The following Conditions apply to all commercial transactions made by KaVo Dental GmbH (in the following: KaVo) with businesses, commercial enterprises and public corporations or institutions. They are not applicable to consumers as defined in EC Guideline 1999/44/EC of May

25th, 1999.

No terms and conditions other than the

Conditions contained herein shall be binding upon KaVo unless accepted in writing by KaVo's

Manager. All terms and conditions contained in any prior oral or written communication, including, without limitation, the Buyer's purchase order, which are different from or in addition to the terms and conditions herein, are hereby rejected and shall not be binding on KaVo.

No contract shall become binding until KaVo accepts the Buyer's order by a written

Acknowledgment of Acceptance.

KaVo's employees or agents are not authorized to make any oral representations which go beyond the written agreement.

2. Products

2.1 KaVo reserves the right to make technical alterations, in particular improvements, to its

Products without prior notification as far as they do not affect the technical function - hence deviations from the specifications contained in catalogues, advertising material etc. are possible.

2.2 KaVo reserves the right at all times to cease manufacture of products or to make substitution as a result of new constructional methods.

3. Delivery

3.1 Unless otherwise agreed in writing, Delivery is made ex-factory Warthausen (EXW Incoterms

2000). Delivery of the Products shall occur when they are made available to the Buyer or its carrier at KaVo's warehouse or when KaVo notifies the

Buyer that the Products are available for pickup. Delivery to any other place is at the Buyer's risk and cost.

3.2 The time of Delivery given by KaVo is given as accurately as possible but is not guaranteed.

Unless KaVo has expressively promised a specific

Delivery date by a separate declaration in writing,

KaVo shall not be liable for any damage, loss or expense arising out of any delay in Delivery of the Products or failure to give notice of delay. In the event that Delivery is overdue for more than six weeks because of KaVo's fault, the Buyer's sole remedy is - unless in case of injury of life, body or health or a deliberate act or gross negligence - to cancel its order by written notice.

3.3 Acts of god, non-delivery from outside suppliers, governmental action, strikes, business disturbances, or any similar hindrances will reduce our delivery commitment; and KaVo is entitled to withdraw in whole or in part from the order.

3.4 Genuine defective items will be replaced or repaired, as KaVo considers appropriate. In the event this re-performance should fail, the Buyer is - according to the legal provisions - entitled to cancel the contract or to claim for an adequate price decrease.

4. Prices, Payment

4.1 All prices are to be understood ex-factory

Warthausen, excluding packing, freight, value added tax (or similar) and customs duties, however, normal cardboard packaging is included.

4.2 The Price of the Product shall be the price quoted by KaVo and confirmed in the

Acknowledgment of Acceptance.

4.3 KaVo reserves the right to increase the Price of the Products to reflect any increase in the cost due to any change in delivery dates, quantities or specifications for the Products which is requested by the Buyer.

4.4 If through no fault of KaVo the Delivery date is more than two month later than the date of the Acknowledgment of Acceptance, KaVo can claim the price listed in the price list valid at the date of delivery.

4.5 Prices quoted do not include VAT or import duties payable by KaVo on the import into the

Buyer's country, and will be charged in addition at the rate ruling at the date of Delivery.

4.6 Unless otherwise agreed upon in the

Acknowledgment of Acceptance, accounts are net and payable within 30 days of the invoice date.

4.7 Where both parties agree that Delivery is by instalments, KaVo may issue separate invoices for each instalment, each invoice being payable separately in accordance with no. 4.6 above.

4.8 Without limitation to any other right or remedy available to KaVo, KaVo shall be entitled in the event of any breach of no. 4.6 above and without any liability whatsoever to the Buyer, to stop or cancel Delivery of any goods sold or agreed to be sold to the Buyer.

4.9 If the buyer falls in arrears with payment,

KaVo is entitled to claim interest on the overdue amount in accordance with sec. 288 of the

German Civil Code (= 8% p.a. above the basic interest rate of the European Central Bank).

86


5. Deficiencies and Warranty

5.1 When goods are dispatched at the risk of

KaVo, any transit damage should be notified to the carrier immediately on receipt. In such case,

KaVo will compensate for all damage acknowledged by the insurance company.

5.2 Possible shortages will be compensated for by further delivery or the issuing of a credit note.

5.3 Warranty claims will be considered only if such claims are reported in writing, as follows:

- Discernible defects - without delay, at the latest one week, after delivery.

- Indiscernible defects - one week after discovery.

5.4 Genuine defective items will be replaced or repaired, as KaVo considers appropriate. In the event this re-performance should fail, the Buyer is - according to the legal provisions - entitled to cancel the contract or to claim for an adequate price decrease.

5.5 The warranty does not apply to parts worn as result of normal wear and tear, nor to damage caused by overloading or misuse.

5.6 The Buyer‘s rights to warranty lapse after a certain period after the date of delivery as described in the appendix of this document.

6. Property, Transfer of Title

6.1 Notwithstanding Delivery of the Products and the passing of risk of damage or loss in the

Products, the property in the Products shall remain solely and absolutely in KaVo as legal and equita ble owner. If the law of the country in which the products are shipped does not allow a full reservation of ownership in the delivered products, the Buyer is obliged to provide a purchase price security interest or any other appropriate security to KaVo.

KaVo retains ownership in the Products or the corresponding security until the Buyer has paid in full of the price of the Products and all other products sold or agreed to be sold by KaVo to the Buyer for which payment is then due.

6.2 KaVo shall be entitled at any time during which it retains ownership or a security in the

Products to require the Buyer to deliver up the

Products to KaVo and, if the Buyer fails to do so forthwith, to enter upon any premises of the

Buyer or any third party where the Products are situated and repossess the Products in accordance with the provisions of the applicable local law.

6.3 Under the above presuppositions, the buyer is entitled to re-sell existing goods in the course of his normal business activities. However, the

Buyer assigns to KaVo all claims and rights he gets by such transaction against the Buyer's customer.

6.4 Should payment fall overdue, the buyer is obliged to inform its customers about the assignment of all rights and claims to KaVo and to place at KaVo's disposal all necessary documents to their assertion.

7. Traceability

For traceability purposes the Buyer undertakes to maintain customer files, containing at least the following information: name and address of customer, type number and serial number of installed and serviced equipment, installation, modification and maintenance reports. GENDEX, responsible for products conformity according to CEE directive nr. 93/42, shall have the right, at its own discretion, to obtain copies of the above mentioned customer files, at any time, within two weeks from the request.

8. Governing Law, Jurisdiction

8.1 These Conditions and all contracts made hereunder are subject to German Law. Place of performance is Biberach/Riß for both parties.

8.2 If any provision of these Conditions is held by a competent authority to be invalid or unenforceable in whole or in part, the validity of the other provisions of these Conditions and the remainder of the provisions in question shall not be affected thereby.

8.3 Any dispute, controversy or claim arising out of or relating to these Conditions or contracts to which these provisions apply, are subject jurisdiction of the German Courts. Place of

Litigation is Ravensburg,

Germany. KaVo however reserves the right to bring a complaint against the Buyer before a court having jurisdiction in the area of the

Buyer's residence.

KaVo Dental GmbH

D-88400 BIBERACH


87

Appendix: Warranty Conditions for GENDEX Products

GENDEX products or component are guaranteed against defects in material and workmanship for a period of M months, indicated in Table 1 below, from the date of installation at end-user premises, given the installation happens within 3 months of KaVo date of invoice to the dealer and the dealer has evidence of the date of installation, via a relevant invoice indicating clearly the equipment part and serial number, date of issue and customer references.

Without such evidence the warranty will start from KaVo data of invoice to the dealer.

Product Name Warranty period from date of installation

Installation within 3 months of KaVo invoice, given evidence of installation date.

In absence of such evidence warranty period from KaVo invoice to Dealer.

Limitations

12 months

GXCB-500

Systems

Orthoralix

Systems and X-ray tube

Oralix, Expert DC

Systems and X-ray tube

VisualiX

Intraoral sensor systems

DenOptix

Digital Phosphor Plate systems

AcuCam Concept IV FWT eZ1

Intraoral Camera

Clarimat 300

Automatic film processor

Spare parts and Accessories

Repaired spare parts

24 months

24 months

24 months

24 months

12 months

12 months max. 4000 X-ray exposures

Phosphor Plates are considered Wear & Digital Phosphor Plate

Tear articles.

12 months

6 months

Disposables/Consumables

Wear & Tear components

no warranty

Table 1

Gendex, GXCB-500, Oralix, Expert DC, DenOptix, Orthoralix, VisualiX, Concept and AcuCam are registered trademarks of Gendex Dental Systems Inc.

VixWin is trademark of Gendex Dental Systems Inc.

Microsoft, Windows, Windows2000, WindowsXP, are Registered Trademarks of Microsoft Corp

FireWire is a registered trademark of Apple Inc.

These conditions are subject to change by KaVo without prior notice.

88



89

1006.0830

KaVo Dental - Gendex Imaging

Via Alessandro Manzoni, 44

20095 Cusano Milanino (MI)

• Italy

Tel. +39 02 61 800 81 • Fax +39 02 61 800 809

www.gendex-dental.com - www.kavo.com

Product

Reference

Guide

2009

No results