CelleBrite Desktop User Manual
Cellebrite Desktop
User Manual
Jun. 2014 | V 2.4 - ENG
LEGAL NOTICES
This manual is delivered subject to the following conditions and restrictions:

This manual contains proprietary information belonging to Cellebrite Ltd. Such information is supplied solely for the
purpose of assisting explicitly and properly authorized users of the Cellebrite Desktop.

No part of this content may be used for any other purpose, disclosed to any person or firm, or reproduced by any
means, electronic or mechanical, without the express prior written permission of Cellebrite Ltd.

The text and graphics are for the purpose of illustration and reference only. The specifications on which they are
based are subject to change without notice.

Information in this document is subject to change without notice. Corporate and individual names and data used in
examples herein are Fictitious unless otherwise noted.
Copyright 2014 Cellebrite Ltd. All rights reserved.
FCC Compliancy
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Cellebrite Desktop User Manual
i
Issue Date: Jun 15, 2014
Revision record:
Cellebrite Desktop User’s Manual
Version
Pub.
Rev.
Date
Update Description
Author/s
1.7
01
Sep 12
First documented version
Eyal Klein
1.9
02
Feb 13
Added Wipe, New diagnostics flow and dashboard
Eyal Klein
2.1
03
Aug 13
Added store agent id, improved Autodetect flow
Eyal Klein
2.2
04
Nov 13
Replace Micro SIM Adapter to Multi SIM Adapter
Eyal Klein
2.3
05
Feb 14
Updated transfer flow and settings screens
Eyal Klein
2.4
06
Jun 15
Search model feature, Time estimates, Self service mode
Eyal Klein
The Cellebrite Desktop should be used only with the dedicated AC/DC adapter supplied with this
device.
USB, Ethernet and target and source connectors should be connected only to CE approved devices
(according to IEC/EN 60065 standard).
Make sure that all external connections to other devices (except for the power adapter) are only
indoor and SELV (safety extra low voltage, does not exceed 42.4 V peak or 60 V DC).
ii
Cellebrite Desktop User Manual
Table of Contents
Chapter 1: Introduction ................................................... 1
1.1. Main features: ........................................................... 1
2.2. Main menu ................................................................. 9
2.2.1.
Menu options ........................................... 9
2.2.2.
Toolbar .................................................... 10
1.1.1.
Phone-to-phone content transfer ............ 1
1.1.2.
Phone content backup ............................. 2
1.1.3.
Restore phone content ............................ 2
2.3.1.
Recently used.......................................... 15
1.1.4.
Wipe phone content ................................ 2
2.3.2.
Custom list .............................................. 15
1.1.5.
In-store phone diagnostics ....................... 3
2.4. Selecting operator ................................................... 16
1.1.6.
Content and applications delivery ........... 3
2.5. Cable connectivity .................................................... 17
1.1.7.
Phone Buy-Back program ......................... 3
2.6. Bluetooth connectivity............................................. 18
1.2. Cellebrite Desktop kit contents ................................. 4
Chapter 3: Transfer Backup & Restore ........................... 19
1.3. Proper setting and usage........................................... 4
3.1. Overview .................................................................. 19
2.3. Selecting source and target phones ........................ 11
1.3.1.
Storing temperature: ............................... 5
3.2. Phone to phone content transfer ............................ 20
1.3.2.
Working temperature: ............................. 5
3.3. Backup phone data to a removable drive ................ 25
1.3.3.
Using connectors and ports ..................... 5
3.4. Restore phone data ................................................. 28
Chapter 2: Getting Started .............................................. 6
3.5. Transfer data to and from SIM/USIM cards ............. 30
2.1. Installation ................................................................. 6
Cellebrite Desktop User Manual
3.5.1.
Transferring SIM content ........................ 31
iii
3.5.2.
Backing up SIM content ......................... 33
3.5.3.
Restoring SIM content ............................ 34
8.2.1.
Change language .................................... 53
Chapter 4: Content Wipe............................................... 35
8.2.2.
Custom phone lists ................................. 54
4.1. Overview ................................................................. 35
8.2.3.
Set self service mode .............................. 55
4.2. Wiping phone content............................................. 36
Chapter 5: Cellebrite Apploader .................................... 38
5.1. Overview ................................................................. 38
8.2. General tab .............................................................. 53
8.3. Transfer tab.............................................................. 56
8.3.1.
Transfer options...................................... 56
8.4. Reporting tab ........................................................... 57
5.2. Installing content ..................................................... 39
8.4.1.
Cellebrite Analytics reporting ................. 57
Chapter 6: Cellebrite Diagnostics .................................. 41
8.4.2.
Store agent ID ......................................... 57
6.1. Overview ................................................................. 41
8.5. Update tab ............................................................... 59
6.2. Diagnostic tests and repair procedures ................... 42
8.5.1.
Software update ..................................... 59
6.3. Typical diagnostics flow ........................................... 43
8.5.2.
Manual software upgrades ..................... 60
6.4. Sample diagnostics session ..................................... 44
8.5.3.
Installing product license ........................ 61
Chapter 7: Cellebrite Buy-Back ...................................... 49
8.5.4.
Refresh content ...................................... 61
7.1. Overview ................................................................. 49
.6.8 Support tab .............................................................. 62
7.2. Offering Buy-Back .................................................... 50
8.6.1.
Application Logs ...................................... 62
Chapter 8: Settings ........................................................ 52
.6.8.8
Transaction Logs ..................................... 63
8.1. Overview ................................................................. 52
iv
.6.8 About tab ................................................................. 64
Cellebrite Desktop Manual
8.7.1.
System & version information................ 64
Appendix A: Data Access Application ............................ 65
Chapter 1: Introduction
Chapter 1: Introduction
Designed to meet the demands of tomorrow’s phones, Cellebrite Desktop is a powerful, fast and easy-to-use
application, bringing new capabilities in-store. These include: Phone-to-Phone content transfer, backup and restore,
diagnostics, instant delivery of apps and content, analytics to manage and monitor multiple stores, and a unique
Buy-Back program offering customers immediate trade-in value on old phones for credit against in-store purchases.
1.1. Main features:
1.1.1.
Phone-to-phone content transfer
Cellebrite Desktop facilitates the transfer of personal data from one phone to
another: contacts, images, SMS messages, video and audio files, ringtones and
more, regardless of the phone manufacturer, model, operating system or
carrier.
Cellebrite Desktop User Manual
1
Chapter 1: Introduction
1.1.2.
Phone content backup
Personal content including contacts, images, SMS messages, video and audio
files, ringtones and more, can be securely backed up to a USB mass storage
device, remote server or the web (cloud).
1.1.3.
Restore phone content
Backed-up personal content including contacts, images, SMS messages, video
and audio files, ringtones and more, can be securely restored from a USB mass
storage device, remote server or the web (cloud).
* Backup/Restore to and from web are optional features.
1.1.4.
Wipe phone content
Personal content including contacts, images, SMS messages, video and audio
files, ringtones and more, can be securely removed from the phone memory
to protect customer’s private data when sending the phone to repair, trading
the phone or sending the phone to be recycled.
* Optional module (licensed separately).
2
Cellebrite Desktop User Manual
Chapter 1: Introduction
1.1.5.
In-store phone diagnostics
Cellebrite’s integrated Diagnostic solution uses an intuitive GUI to guide store
agents through problem isolation and resolution. This comprehensive tool
enables the fast identification and resolution of mobile phone faults in-store
-substantially reducing the need to send NFF (No Fault Found) phones to labs
and repair shops, minimizing costs, saving time and improving customer
service. * Optional module (licensed separately).
1.1.6.
Content and applications delivery
With Cellebrite Desktop, retailers can offer delivery and side-loading of
applications and content packages in-store, enabling dynamic personalization
according to user profile; phone type and content preferences. Retailers can
also promote specific content. * Optional module (licensed separately).
1.1.7.
Phone Buy-Back program
Cellebrite now offers mobile retailers a major opportunity to dramatically
increase their trade-in take-up rate by promoting old phone trade-ins as part
of the sales process through the unique Cellebrite Buy-Back program. The
Buy-Back program changes the dynamic of phone trade-ins, giving the sales
agent the promotional initiative. * Optional module (licensed separately).
Cellebrite Desktop User Manual
3
Chapter 1: Introduction
1.2. Cellebrite Desktop kit contents
Your Cellebrite Desktop kit comes in a carrying case. In addition to this user guide, the Cellebrite Desktop kit includes:
Cellebrite Phone Connector
Power supply
Multi SIM
adapter
Cable kit
Cleaning brush (for
phone connectors)
Type A to Type B USB
Cable
1.3. Proper setting and usage
For your safety and that of your equipment, follow these rules for handling and cleaning your Cellebrite Phone
Connector. Keep these instructions handy for reference by you and others. Incorrect storage or use of your device may
void the manufacturer’s warranty.
4
Cellebrite Desktop User Manual
Chapter 1: Introduction
1.3.1.
Storing temperature:
The Cellebrite Phone Connector was designed to withstand storing temperature of between -20°C to 70°C / -4°F to
158°F.
1.3.2.
Working temperature:
The Cellebrite Phone Connector was designed to work indoors and can withstand operating temperature of between
0°C to 40°C / 32°F to 104°F.
To reduce the possibility of heat-related damages, follow these guidelines:
Set up your Cellebrite Phone Connector on a stable work surface that allows adequate air circulation under the
device.
Do not block the air circulating grills of the device.
Do not store a running device inside a poorly ventilated space such as a drawer or a cabinet.
1.3.3.
Using connectors and ports
When connecting a phone to the device, make sure that:
The connector matches the port.
The port is free of debris.
You positioned the connector correctly in relation to the port.
Cellebrite Desktop User Manual
5
Chapter 2: Getting Started
Chapter 2: Getting Started
2.1. Installation
Cellebrite Desktop installation can be lunched from a dedicated installation CD, a local drive or an external USB drive.
The following procedure describes installing from the installation CD.
To download the installation file:
6
1.
Type the following URL into your browser
http://www.cellebrite.com/desktop-downloads.
The Cellebrite Desktop Installation screen
appears:
2.
Enter your Phone Connector serial number and
click Download. The save file to folder screen
appears.
3.
Select the folder you want to save the installation
file in and then click save.
Cellebrite Desktop User Manual
Chapter 2: Getting Started
To install:
1.
Insert the Cellebrite Desktop installation disk into your CD drive.
Or
Select the folder where you downloaded the installation file to, and double
click on Desktopinstallation.exe
The Cellebrite Desktop Installation wizard screen appears:
2.
Click Next, the Select Destination screen appears:
3.
Select the folder where you want the application installed and click Next to
continue. The Select Additional Tasks screen appears.
4.
Select the additional tasks you want the install wizard to perform, and then
click Next. The Ready to Install screen appears.
5.
Click Install to start the installation process. The Installing screen appears
displaying the installation progress bar.
6.
If the Cellebrite Phone Connector was not connected yet, a message box will
appear instructing you to connect it now.
7.
Connect the power supply adapter to the Cellebrite Phone Connector’s power jack and then connect the Power
supply to the power source. The power indicator turns green.
8.
Use the USB cord to connect the computer to the Cellebrite Phone Connector’s PC USB port.
Click OK to continue.
A message box will appear instructing you to restart the computer.
Cellebrite Desktop User Manual
7
Chapter 2: Getting Started
9.
Check the Restart Now check box and click Finish to restart the
computer.
10. Once the computer reboots, click Start > All programs > Cellebrite
Desktop
or
Click on the Cellebrite Desktop icon.
The Software License Key screen appears:
11. Click on From Server to download a license from the network or From
USB to use a pre-loaded license from a USB drive. A message box will
appear instructing you to restart the application.
12. Click OK to restart the application. The Cellebrite Desktop Main menu
screen appears.
8
Cellebrite Desktop User Manual
Chapter 2: Getting Started
2.2. Main menu
The Cellebrite Desktop main screen includes icons for the Transfer,
Backup, and Restore services. Additional services are available depending
on type of license purchased by the customer.
2.2.1.
Menu options
Transfer - Use this option to perform a phone-to-phone transfer of data from one mobile phone or SIM
card to another mobile phone or SIM card. For more information see ‎3.2 Phone to phone content transfer
on page 20.
Backup - Use this option to back up data from a mobile phone or a SIM card to a USB mass storage device.
For more information see ‎3.3 Backup phone data to a removable drive on page 25.
Restore - Use this option to restore data to a mobile phone or a SIM card from a USB mass storage device.
For more information see ‎3.4 Restore phone data on page 28.
Wipe - Use this option to erase customer’s private data from a mobile phone before trading the phone or
sending it to repair shop or recycle center. For more information see ‎4.2 Wiping phone content on page 36.
Cellebrite Desktop User Manual
9
Chapter 2: Getting Started
Apploader (Optional) - Use this option to install mobile applications and content such as video, music and
multimedia files from the Cellebrite Desktop to a mobile phone. For more information see ‎5.2 Installing
content on page 39.
Diagnostics (Optional) - Use this option to run diagnostic tests on a faulty phone. For more information
see ‎6.4 Sample diagnostics on page 44.
Buy-Back (Optional) - Use this option to offer a trade-in for an old phone. For more information see ‎7.2
Offering Buy-Back on page 50.
2.2.2.
Toolbar
The toolbar at the top of the screen provides quick access to global features.
Home - Select the Home button to return to the main screen.
Settings - Use the Settings button to configure default settings for the Cellebrite Desktop application. For
more information about settings see Chapter 8: Settings on page 52.
10
Cellebrite Desktop User Manual
Chapter 2: Getting Started
2.3. Selecting source and target phones
When selecting a menu option from Cellebrite Desktop main screen, you will be guided to select the Source, Target or
both Source and Target phones.
the following paragraphs describes the process of selecting source and target phones for the transfer option, however
they are valid for all of the options listed in the main menu.
Selecting a phone
1.
Select Transfer type: From the main screen, select the desired menu
option.
If the Cellebrite Desktop version you use supports the Enabled
store-agent ID feature, the Store Agent ID screen will be displayed. Enter your Store Agent ID and click OK.
If you are using a Mobile Retail Chain version of the Cellebrite
Desktop, the Select Operator screen will be displayed as described in ‎2.4 Selecting operator on page 16.
The Search Model screen is displayed.
Cellebrite Desktop User Manual
11
Chapter 2: Getting Started
2.
Use Autodetect - If you know which cable to use, connect the phone
to the Phone Connector’s USB port indicated by the flashing red light.
If the phone is recognized, the Handset Auto-detected successfully
screen appears and the red light will turn green.
The Cellebrite Desktop automatically detects automatically detects
Smartphones with Android, iOS, Windows Phone and BB10 operating
systems. However, In case the phone was not recognized use one of
the following methods to select the phone manually:
Search phone model – enter the phone model and/or vendor into
the search field. You can use full or partial names in any order you
want and the phone model list will adjust automatically to match
your search terms as indicated by the red underline.
Recently Used - use the Recently Used button to select a phone
model from a list of recently used phones as described in ‎2.3.1
Recently used on page 15.
Custom list - use the Custom list button to select a phone model
from a pre customized list of phones as described in ‎2.3.2 Custom
list on page 15.
Select from list – use the Vendors button to open the Select Vendor screen:
12
Cellebrite Desktop User Manual
Chapter 2: Getting Started
3.

Select vendor - enter the manufacturer name
or
use the Up and Down arrow buttons to browse the vendors
list.
Select the desired vendor from the list.
The Select Model screen appears:

Select model - enter the model name in the search field
or use the Up and Down arrow buttons to browse the models list.
Select the desired model from the list.
Select network - If the same phone model can be used for both GSM
and CDMA cellular networks, select the desired network.
The Waiting for Device screen appears:
4.
Attach the phone: Follow the instructions to connect the phone to
the PC Connector.
Or
Click on Switch to Bluetooth connectivity and follow the instructions
described in ‎2.6 Bluetooth connectivity on page 18.
Cellebrite Desktop User Manual
13
Chapter 2: Getting Started
Connection instructions for late phone models include HTML
based help screens with GUI and step-by-step instructions
accompanied by phone screenshots.
In this release (2.4), the new help screens will be displayed in
English for all of the versions of Apple Iphone and the top 60
Android Smartphones. The “Old” help screens will be displayed when working in a different language or phone.
If the phone supports Bluetooth connectivity, a button named
Switch to Bluetooth will appear next to the Continue button
allowing you to use Bluetooth connectivity as described in ‎2.4
Bluetooth connectivity on page 16.
14
Cellebrite Desktop User Manual
Chapter 2: Getting Started
2.3.1.
Recently used
If you recently used this type of phone as source or target phone, you can
select the phone model from the “recently used” phones list.
1.
Click the Recently Used button. The Recently Used screen appears:
2.
Select the desired phone from the list.
2.3.2.
Custom list
If you have created a custom list of commonly used phones, a Custom List
button will be added to the screen. See section ‎8.2.2 Custom phone lists
on page 54 for more information about creating custom lists.
1.
Click the Custom List button. The Custom list screen appears:
2.
Select the desired phone from the list.
Cellebrite Desktop User Manual
15
Chapter 2: Getting Started
2.4. Selecting operator
If you are using a Mobile Retail Chain version of the Cellebrite Desktop,
the select operator screen will be displayed, allowing you to select an
operator from a list of the chain supported operators in order to reduce
the lists of vendors and models to the ones relevant to the operator.
Select the desired operator in order to list only the vendors that are
supported by the selected operator
Or
Click the All Models button to list all of the vendors.
The Search Model screen is displayed.
16
Cellebrite Desktop User Manual
Chapter 2: Getting Started
2.5. Cable connectivity
Cellebrite Desktop displays the “Waiting for Phone” screen instructing
which port and cable number to use and how to set the phone settings.
If you want to use the Bluetooth connection, click on Switch to Bluetooth
connectivity and follow the instructions described in ‎2.6 Bluetooth
connectivity on page 18 .
When using a cable connection, a blinking red light will appear on the
Cellebrite Phone Connector next to the desired port. The light will turn
green once the phone is connected and recognized by the Cellebrite
Desktop.
If you need the same cable to connect both source and target phones, use
the Connect Later button.
Cellebrite Desktop User Manual
17
Chapter 2: Getting Started
2.6. Bluetooth connectivity
Cellebrite recommends using cable connectivity for higher transfer rate,
however, in case you have to transfer phonebook data from a Windows
Phone device, or if you can’t find the right cable, tap the Switch to
Bluetooth button in the Waiting for Device screen to use Bluetooth
connectivity.
When transferring phone book and multimedia content to/from Windows
Phone device you will be instructed to use Bluetooth to transfer the phone
book data and then to use the cable connectivity to transfer the other
content types.
Cellebrite Desktop displays a “Discovering Phones” message while it
automatically searches for visible Bluetooth devices within its proximity,
and generates a list of all the phones it finds.
18
1.
On the mobile phone, you must enable the phone to connect via
Bluetooth, by turning Bluetooth capabilities on.
2.
Set the Bluetooth services to ‘Visible’.
3.
Follow the connectivity instructions on the Cellebrite Desktop screen.
Cellebrite Desktop instructs you to enter a pin code in the Bluetooth
phone to complete the pairing between the devices
Cellebrite Desktop User Manual
Chapter 3: Transfer Backup & Restore
Chapter 3: Transfer Backup & Restore
3.1. Overview
Cellebrite Desktop is a professional phone memory transfer and backup solution that transfers all forms of content,
including: pictures, videos, ringtones and SMS, as well as phonebook contact data, between a wide range of mobile
phones, smart phones and tablets.
Cellebrite Desktop content transfer features include:
Phone to phone data transfer.
Phone data backup.
Phone data restore.
SIM/USIM content transfer, backup and restore.
Transfer time varies according to the selected data types. Large multimedia files may impact transfer time
significantly.
Do not disconnect the phone during the Transfer, Backup or Restore process! Once started, the process
should not be interrupted.
Cellebrite Desktop User Manual
19
Chapter 3: Transfer Backup & Restore
3.2. Phone to phone content transfer
Use the Transfer option to transfer Phonebook contacts, SMS and MMS messages, Emails, Pictures, Audio and Video
files and Ringtones from an old phone or SIM/USIM card to a new one.
N
O Select the source
Select the
phone
target phone
T
E
To transfer phone content:
1.
Attach source
and target
phones
Select which
content to
transfer
Transfer
content
Select Transfer: From the main menu, select Transfer to copy data from one phone (the source) to another phone
(the target).
If the Cellebrite Desktop version you use supports the Enabled store-agent ID feature, the Select Store
Agent screen will be displayed. Enter your Store Agent ID and click OK.
If you are using a Mobile Retail Chain version of the Cellebrite Desktop, the select operator screen will be displayed as described in ‎2.4
Selecting operator on page 16.
2.
20
Select and attach the source phone: Use Autodetect or manually select
the vendor and model, and attach the source phone to the Phone
Connector’s source port. For more information see ‎2.3 Selecting source
and target phones on page 11.
Cellebrite Desktop User Manual
Chapter 3: Transfer Backup & Restore
3.
Select and attach the target phone: Use Autodetect or manually select the vendor and model, and attach the
target phone to the Phone Connector’s target port. The Select Content Types screen appears:
If you need the same cable to connect both source and target phones, use the Connect Later button.
To transfer phonebook data from a Windows Phone or if the required cable cannot be used - click on
Switch to Bluetooth and follow the instructions as described in ‎2.6 Bluetooth connectivity on page 18.
4.
Select memory: Select which phone memory to transfer (Phone SIM
and Memory card).
5.
Select which content types to transfer: Each of the Content type
buttons displays number of items, accumulated size and estimated
transfer time.
Click on a content type button to select it for transfer.
The content size and estimated transfer time are calculated and
added to the Total Estimated Transfer Time and the Required
Disk Space displayed below the content type buttons.
If the Required Disk Space exceeds the Target Free Disk Space,
the Target Free Disk Space display color will turn red. In this case,
you can lower the video transfer size threshold by tapping on the
+ sign displayed in the upper right corner of the Videos content
button, and omit large video files or unselect a content type.
Tap Start » to continue.
Cellebrite Desktop User Manual
21
Chapter 3: Transfer Backup & Restore
6.
Install content: If the version you use supports the “Apploader”
option, and the Install content after transfer or restore check box in
the Settings Transfer tab is checked the Select Content Pack screen
will be displayed:
Follow the instructions on the screen to complete the content
installation procedure. For more information see ‎5.2 Installing
content on page 39.
Click Next » to continue.
Cellebrite Desktop displays statistics and progress bars as it reads the
source memory and writes to the target memory.
7.
22
Select accounts: If the phone you are backing up supports user
accounts, the Select Account screen will be displayed. Select the
account you want to transfer.
Click Continue ».
Cellebrite Desktop User Manual
Chapter 3: Transfer Backup & Restore
8.
Select Multimedia files: If the Cellebrite Desktop can’t read the
content information from the phone you selected during the select
content type process, the Multimedia Selection screen will appear
after the contacts and SMS’s are transferred.
Select the type of multimedia files you want to transfer and click OK »
to continue.
The Extract in Progress screen reappear displaying statistics and
progress bars as the transfer progress.
9.
Source/Target instructions: When the transfer process is complete,
the Source Instructions screen appears. Follow the instructions on the
screen to return the phone to its working mode.
Click Continue>>. The Target Instructions screen appears:
10. Target Instructions: Follow the instructions on the screen to return
the phone to its working mode.
Click Continue>>.
Cellebrite Desktop User Manual
23
Chapter 3: Transfer Backup & Restore
11. The Transfer Summary screen appears, displaying statistics of the
number of entries that were read and written to memory and the
following verification message: “Transfer completed successfully”.
Click Finish to continue.
12. Offer Buy-Back: If the version you have supports the “Buy-Back”
option, and the Propose Buyback after Transfer check box in the
Settings Transfer tab is checked, the following screen appears:
Follow the instructions on the screen to complete the Buy-Back
procedure. For more information see ‎7.2 Offering Buy-Back on page
50.
Do not disconnect the phone during the transfer process!
Once started, the transfer process should not be interrupted.
24
Cellebrite Desktop User Manual
Chapter 3: Transfer Backup & Restore
3.3. Backup phone data to a removable drive
Cellebrite Desktop enables you to easily back up content stored on a mobile phone to a USB mass storage device.
Select and attach the source
phone
Attach backup
device
Select content to
Backup
Backup content
To backup phone content:
1.
Select Backup: From the main menu, select Backup.
If the Cellebrite Desktop version you use supports the Enabled store-agent ID feature, the Select Store
Agent screen will be displayed. Enter your Store Agent ID and
click OK.
2.
Select and attach the source phone: Use Autodetect or manually
select the vendor and model, and attach the source phone to the
source port. For more information see ‎2.3 Selecting source and target
phones on page 11. Click Continue »
To transfer phonebook data from a Windows Phone device or if
the required cable cannot be used - click the Switch to Bluetooth
button and follow the instructions described in section ‎2.6 Bluetooth connectivity on page 18.
Cellebrite Desktop User Manual
25
Chapter 3: Transfer Backup & Restore
The Waiting for Removable Drive screen is displayed:
3.
Attach the target drive: Connect the USB mass storage device to the
Target USB port and click Continue ». The Select Content Types screen
appears:
4.
Select memory: Select which phone memory to backup (Phone, SIM
and Memory card).
5.
Select which content types to backup: Each of the Content type
buttons displays number of items, accumulated size and estimated
transfer time per each content type.
Click on a content type button to select it for backup.
The content size and estimated transfer time are calculated and
added to the Total Estimated Transfer Time and the Required
Disk Space displayed below the content type buttons.
If the Required Disk Space exceeds the Target Free Disk Space,
the Target Free Disk Space display color will turn red. In this case,
you can lower the video transfer size threshold by tapping on the
+ sign displayed in the upper right corner of the Videos content
button, and omit large video files or unselect a content type.
6.
26
Click on Start » to continue. The Backup Extraction in Process screen
appears
Cellebrite Desktop User Manual
Chapter 3: Transfer Backup & Restore
7.
Select accounts: If the phone you are backing up supports user
accounts, the Select Account screen appears.
Select the account you want to backup and click Continue ».
The Extract in progress screen reappear displaying statistics and
progress bars as the transfer progress. When done the Source
Instructions screen appears.
8.
Source instructions : Follow the instructions on the screen to return
the phone to its working mode.
Click on Continue>>. The Backup Summary screen appears.
Do not disconnect the phone during the backup process! Once
started, the backup process should not be interrupted.
Cellebrite Desktop User Manual
27
Chapter 3: Transfer Backup & Restore
3.4. Restore phone data
Cellebrite Desktop enables you to easily restore back-up content from a USB mass storage device to your mobile
phone.
Select and attach target
phone
Select content to
restore
Attach source device
Restore content
To restore phone content:
1.
Select Restore: From the main menu, select Restore to restore backup content to a target phone.
If the Cellebrite Desktop version you use supports the Enabled
store-agent ID feature, the Select Store Agent screen will be displayed. Enter your Store Agent ID and click OK.
2.
28
Select and attach the target phone: Use Autodetect or manually select
the vendor and model, and attach the target phone to the target port.
For more information see ‎2.3 Selecting source and target phones on
page 11. Click Continue ».
The Select Content Types screen is displayed:
Cellebrite Desktop User Manual
Chapter 3: Transfer Backup & Restore
3.
Select which content types to restore: Click on a content category to
select it, Use the Select All button to select all of the available content
types. Click Next » to continue.
4.
Install content: If the version you have supports the “Apploader”
option, the Select Content Pack screen will appear.
Follow the instructions on the screen to complete the content
installation procedure. For more information see ‎5.2 Installing
content on page 39. Click Next » to continue.
The Waiting for Removable Drive screen is displayed.
5.
Attach the source device: Cellebrite Desktop instructs you to connect
the source device and select the backup folder.
6.
Complete the restore phone content process: Cellebrite Desktop
copies all of the selected content from the saved backup to the target
phone. When done, the Target Instructions screen appears.
7.
Target instructions : Follow the instructions on the screen to return
the phone to its working mode. When done, the Restore Summary
screen appears.
Cellebrite Desktop User Manual
29
Chapter 3: Transfer Backup & Restore
3.5. Transfer data to and from SIM/USIM cards
Cellebrite Desktop enables you to easily transfer backup and restore back-up SIM content.
The Cellebrite Phone Connector's SIM card reader is used when you perform a Transfer, Backup or Restore from/to the
SIM card (i.e., not from an actual phone). In this case, the SIM card can be either or both the Source or Target.
To use the Cellebrite Phone Connector's built-in SIM card reader, verify that the angled edge of the SIM card is on the
right, with the metal SIM card contacts facing down.
To transfer data to and from a Micro or a Nano SIM use the Multi SIM adapter provided in the Cellebrite Desktop kit.
30
Cellebrite Desktop User Manual
Chapter 3: Transfer Backup & Restore
3.5.1.
Transferring SIM content
Select SIM as source
Attach source SIM &
read
Select content
Attach target SIM &
write
To transfer SIM content:
1.
Select Transfer: From the main menu, select Transfer.
If the Cellebrite Desktop version you use supports the Enabled
store-agent ID feature, the Select Store Agent screen will be displayed. Enter your Store Agent ID and click OK.
The Search Model screen is displayed.
2.
Select the source: Select SIM Card as the source phone.
3.
Select the target: Select SIM Card (or a vendor and model) as the
target phone. The Waiting for Source Device screen appears:
4.
Attach the source SIM card: Insert the source SIM card into the
Cellebrite Phone Connector's built-in SIM card reader. Click Continue»
The Select Content Types screen appears:
Cellebrite Desktop User Manual
31
Chapter 3: Transfer Backup & Restore
5.
Select which content types to transfer: Only Phonebook data transfer
is enabled. Click Start » to continue.
Cellebrite Desktop displays statistics and progress bars as it reads the
source memory.
If the SIM is protected with a PIN, you will need to enter the
PIN during the transfer process.
6.
Attach the target SIM card: Insert the target SIM card into the
Cellebrite Phone Connector's built-in SIM card reader and Click
Continue».
Cellebrite Desktop displays statistics and progress bars as it writes the
data to the card.
When the transfer process is complete, the Transfer Summary screen
appears, displaying statistics of the number of entries that were read
and written to memory.
32
Cellebrite Desktop User Manual
Chapter 3: Transfer Backup & Restore
3.5.2.
Backing up SIM content
Select and attach SIM source
Select and attach
USB target
Select content
Backup
To backup content from a SIM card:
1.
Select Backup: From the main menu, select Backup.
If the Cellebrite Desktop version you use supports the Enabled store-agent ID feature, the Select Store
Agent screen will be displayed. Enter your Store Agent ID and click OK.
The Search Model screen is displayed.
2.
Select source: Select SIM Card as the source phone.
3.
Attach the source SIM card: Insert the source SIM card into the Cellebrite Phone Connector's built-in SIM card
reader and click Continue ».
4.
Attach the target drive: Connect the USB mass storage device to the Target USB port. Click Continue ».
5.
Select which content types to backup: Only Phonebook data transfer is enabled. Click Start » to start the backup
process. The Backup in Progress screen appears displaying statistical information and progress bars.
6.
Complete the backup process: Cellebrite Desktop copies all the selected content from the source SIM to the
target location. When the backup process is complete, the Transfer Summary screen appears.
Cellebrite Desktop User Manual
33
Chapter 3: Transfer Backup & Restore
3.5.3.
Restoring SIM content
Select SIM as target
Select content
Attach and
select source
Attach traget
Restore
To restore content to a SIM card:
1.
Select Restore: From the main menu, select Restore.
If the Cellebrite Desktop version you use supports the Enabled store-agent ID feature, the Select Store
Agent screen will be displayed. Enter your Store Agent ID and click OK.
The Search Model screen is displayed.
34
2.
Select target SIM: Select SIM Card as the target phone. The Select Content Types screen is displayed.
3.
Select which content types to restore: Only Phonebook data transfer is enabled. Click Next » to continue. The
Waiting for Removable Drive screen appears.
4.
Attach source drive: Attach the removable USB drive to the source port Cellebrite Phone Connector and click
Continue ». The Select Folder screen appears.
5.
Select Backup file: Select the folder containing the desired backup file. The Waiting for Device screen appears.
6.
Attach the target SIM card: Insert the target SIM card into the Cellebrite Phone Connector's built-in SIM card
reader. Click Continue ».Cellebrite Desktop copies all the selected content from the backup folder (source drive)
to the target SIM. When the restore process is complete, the Transfer Summary screen appears.
Cellebrite Desktop User Manual
Chapter 4: Content Wipe
Chapter 4: Content Wipe
4.1. Overview
Cellebrite Desktop enables secure logical wipe of personal content such as Phone book, SMS’s, MMS’s, Audio and
Video files.
Cellebrite Desktop Content Wipe module (licensed separately), is the perfect solution for deleting personal content
from your handset prior to handing it over for repair or trade.
Content Wipe can be activated in the following scenarios:
As a standalone operation upon a return of a rental or replacement phone.
At the end of a Buyback operation prior to handing the phone to the broker.
At the end of a Diagnostics operation prior to handing the phone to the repair lab.
At the end of a Transfer operation upon a customer request.
Cellebrite Desktop User Manual
35
Chapter 4: Content Wipe
4.2. Wiping phone content
Select source phone
Attach source phone
Wipe content
Cellebrite Desktop Content Wipe erases all data and content from the phone. We strongly recommend
performing backup before to save valuable data.
To erase personal content from a phone:
1.
Remove memory card: Remove any portable memory cards from the target phone.
2.
Select Wipe: From the main menu, select Wipe.
If the version you use supports the Enabled store-agent ID feature, the Select Store Agent screen will be
displayed. Enter your Store Agent ID and click OK.
The Search Module screen is displayed.
3.
Select and attach the source phone: Use Autodetect or manually select the vendor and model, and attach the
source phone it to the source port. For more information see ‎2.3 Selecting source and target phones on page 11.
Click Continue ».
The Phone Wipe Confirmation screen appears:
36
Cellebrite Desktop User Manual
Chapter 4: Content Wipe
4.
Confirm wipe: Make sure the SD card was removed from the phone
and click Yes to continue. The Wipe – Extraction in progress screen
appears:
5.
Enable wipe: Follow the instructions on the phone screen to enable
the Wipe process.
6.
Automatic reboot: Depending on the phone operating system, the
phone may shut down and then reboot automatically during the wipe
procedure.
7.
Finish the procedure: When done the Wipe Succeed screen appears.
Click OK to return to the main menu.
Cellebrite Desktop User Manual
37
Chapter 5: Cellebrite Apploader
Chapter 5: Cellebrite Apploader
5.1. Overview
Cellebrite Desktop Apploader module (licensed separately), is the perfect solution for delivering valuable content and
mobile applications to handsets. Using the Cellebrite Desktop, media content and applications can be side-loaded
directly to the phone without having to fall back on air time.
Cellebrite Desktop enables content delivery packs to be updated automatically, allowing for dynamic personalization
according to user background, handset type, content type, regions, and more.
Content and Application Delivery offers the following:
Promote content by regions, upload content packages.
Use auto install for transparent process of content uploading.
Replace manufacturer pre-install process.
Install carrier applications.
38
Cellebrite Desktop User Manual
Chapter 5: Cellebrite Apploader
5.2. Installing content
Select and attach target phone
Select content to install
Install content
To side-load content to a phone:
1.
Network connection: Make sure you are connected to the LAN via the
Ethernet port or the wireless connection.
2.
Select Apploader: From the main menu, select Apploader.
If the Cellebrite Desktop version you use supports the Enabled
store-agent ID feature, the Select Store Agent screen will be displayed. Enter your Store Agent ID and click OK.
3.
Select and attach the target phone: Use Autodetect or manually
select the vendor and model, and attach the target phone it to the
target port. For more information see ‎2.3 Selecting source and target
phones on page 11. Click Continue ».The Select Content Pack screen
appears:
4.
Select which content to install: Select the desired content
(applications, music, video, packs, coupons etc.) from the list.
Cellebrite Desktop User Manual
39
Chapter 5: Cellebrite Apploader
Click Next » to continue.
5.
Install directly: if the content pack includes content that should be
installed directly from the Cellebrite Desktop, the Waiting for Phone
screen will appear.
Cellebrite Desktop copies all of the selected content to the target
phone.
6.
7.
40
Install via SMS: if the content pack includes content that should be
installed from an application store, the Identify phone to Server screen
appears:

Phone number: Type in the phone number of the target phone
and then click on Submit».
After a few seconds the phone will receive an SMS message
including a password.

Password: Using the keyboard, type in the password and then
click on Submit ».

After a few seconds the phone will receive an SMS message
including a link to the download page of the application store.
Finish installation: Follow the instructions on the Cellebrite Desktop
display and the phone screen to complete the installation. When
done, the Install Summary screen appears.
Cellebrite Desktop User Manual
Chapter 6: Cellebrite Diagnostics
Chapter 6: Cellebrite Diagnostics
6.1. Overview
Cellebrite’s sophisticated Diagnostic solution (licensed separately), is an easy-to-use, comprehensive system, which
enables the fast identification and resolution of mobile phone faults in-store. This substantially reduces the need to
send NFF (No Fault Found) phones to labs and repair shops, thereby minimizing costs, saving time and improving
customer service by automatically fixing many common problems on the spot.
Cellebrite’s Diagnostics customizable procedure flow was designed to use modular building blocks from the following
categories:
Diagnostics Core –Automatic and targeted test and repair procedures developed for each type of phone (for
example CPU performance test and Flash repair procedure). The diagnostics core procedures cannot be customized.
Diagnostics Policies – Retailer’s maintenance, warranty and billing rules and procedure aimed to implement
the customer policies (for example: should a rooted phone be accepted or not and how much to charge for a
specific test or repair). The diagnostics policies procedures can be customized.
Diagnostics integration –Retailer ERP systems can be accessed to retrieve relevant information such as phone
warranty information and book the phone to repair lab. The diagnostics integration procedures can be customized.
Cellebrite Desktop User Manual
41
Chapter 6: Cellebrite Diagnostics
6.2. Diagnostic tests and repair procedures
Cellebrite Desktop Diagnostic test and repair procedures list varies according to the selected target phone. New
procedures are added to the test database on a daily basis.
Diagnostic tests and repair procedures include:
Phone settings check.
Network coverage, 3G, 2G, LTE, wireless (Wi-Fi and BT) and wired (USB) communication channels connectivity
tests.
Loudspeaker, Gravity sensor, Gyroscope sensor, Accelerometer sensor, Proximity sensor screen, camera, touch
display and etc. functionality tests.
Battery health test: Provides operators with a rapid battery analyzer tool for a broad range of rechargeable cell
phone batteries.
Compare test results to gold values.
Triage to identify No Fault Found (NFF) Vs “send to repair center” (identify software or hardware issue).
Preferred Roaming List (PRL) setting for CDMA phones: Enables the agents in the POS to set a preferred roaming providers list.
On store refurbishing, hard-reset, restore manufacture setting etc. to solve most software issues.
On site Firmware Updating (Flashing): In-store phone firmware updates.
42
Cellebrite Desktop User Manual
Chapter 6: Cellebrite Diagnostics
6.3. Typical diagnostics flow
Cellebrite diagnostic procedure flow and instructions might vary depending on the customer specifications (for
example some retailer work flow does not include diagnostic history review, hardware damages inspection or
automatic preliminary tests). A typical diagnostics procedure flow may include the following building blocks:
Diagnostics Policies – Check hardware damage.
Diagnostics Core –Connect phone.
Diagnostics Policies – Display phone maintenance history.
Diagnostics Integration –Check phone warranty.
Diagnostics Core –Perform Automatic test and display results dashboard.
Diagnostics Core - Offer repair solution.
Diagnostics Policies – Display repair cost, offer backup and update services.
Diagnostics Core - Perform repair solution and retest automatic tests.
Diagnostics Integration –Charge for successful repair or offer new repair procedure upon failure.
Diagnostics Core - Perform repair solution and retest automatic and targeted tests.
Diagnostics Integration –Charge for successful repair or book phone to repair lab upon failure.
Diagnostics Policies – Display and print transaction summary report.
The following section describes a sample diagnostics session. The procedure might vary depending on the retailer’s
specifications.
Cellebrite Desktop User Manual
43
Chapter 6: Cellebrite Diagnostics
6.4. Sample diagnostics session
Select and attach target phone
Run Auto diagnostic test
Review results & Repair
The following section describes a sample diagnostics session. The procedure might vary depending on the Retailer’s
specifications and workflow as well as the selected phone.
To perform diagnostics tests (sample):
1.
Network connection: Make sure the Cellebrite Desktop is connected
to the LAN via the Ethernet port or the wireless connection.
2.
Select Diagnostics: From the main menu, select Diagnostics.
If the Cellebrite Desktop version you use supports the Enabled
store-agent ID feature, the Select Store Agent screen will be displayed. Enter your Store Agent ID and click OK.
The Search Model screen appears.
3.
44
Select and attach the target phone: Use Autodetect or manually select
the vendor and model, and attach the target phone it to the target port.
For more information see ‎2.3 Selecting source and target phones on
page 11. Click Continue ». The Check Hardware screen appears:
Cellebrite Desktop User Manual
Chapter 6: Cellebrite Diagnostics
4.
Check hardware: Check the phone for any hardware damage that
might revoke the warranty.
Click Yes to book repair and exit diagnostics, or No to continue. The
install Client application screen appears. At the end of the upload
process, the Running tests screen appears and the Welcome to
Diagnostics screen is displayed on the phone screen.
5.
Warranty check: Using the information gathered from the phone logs,
Cellebrite Desktop checks if the phone under warranty. According to
the company warrant policy click OK to continue or Cancel to stop the
diagnostics procedure. The Root Test screen will appear.
6.
Root test: Click OK to check the phone firmware for jail breaking.
According to the company warrant policy click OK to continue or
Cancel to stop the diagnostics procedure.
7.
Auto testing: At the end of the Auto test procedure, the Auto Test
Dashboard screen appears.
Auto test take up to two minutes.
Auto test includes phone dialing and outgoing calls test procedure.
Cellebrite Desktop User Manual
45
Chapter 6: Cellebrite Diagnostics
8.
Review test results: The auto test dashboard screen displays the test
results grouped into test categories. Phone malfunctions are marked
using the yellow exclamation mark (!) in the relevant category.
9.
Review phone diagnostics history: The Phone Diagnostics History
screen appears allowing you to review the phone diagnostics history
and reveal any information related to the reported problem.
Click on Details for more information.
10. Review test details: Click on the desired test category to reveal
information about the entire group of tests in the category. The
following screen displays the detailed test results of the Calls test
category. Note that the failed tests are marked with the exclamation
mark (!).
11. Repair: Click Continue », Cellebrite Desktop analyses the problem and
suggest the appropriate repair solution as shown in the following
screen. Click Yes to perform the suggested repair procedure.
At the end of the repair procedure, the automatic test procedure is
lunched and the auto test dashboard screen is displayed. If the original
problem was not fixed, a new repair procedure will be offered or a
suggestion to book the phone to the repair lab.
46
Cellebrite Desktop User Manual
Chapter 6: Cellebrite Diagnostics
12. Perform targeted tests: If you selected a test category that includes
targeted tests, clicking Continue » in the Test Details screen, will open
the Customer Complaint screen.
Note: In some cases the targeted test screen will appear without the
customer complaint screen.
13. Select a diagnostic test: According to the customer’s complaint, select
the required test category.
14. Follow test instructions: Follow the instructions on the screen and
phone display during the test progress.
Some of the diagnostics tests (such as Connectivity test and Power cycling) run automatically and requires no
user intervention. Therefore, no instructions are displayed.
Cellebrite Desktop User Manual
47
Chapter 6: Cellebrite Diagnostics
15. Finish the diagnostics process: When the testing process is complete,
the Recommended Action screen appears displaying the action
needed to resolve the problem.
Click Yes to run the recommended action or No to reject the
recommendation.
During Flash and Factory reset repair procedures, the Cellebrite
Desktop automatically backup and restore customer content.
16. Review repair results: To check the repair procedure the diagnostics
auto test runs again and the results are displayed in the dashboard.
17. Repair Failure: If the repair failed, click on the desired test category to
review the test details and receive new repair solution or offer to
book the device to repair.
18. Repair Success: If the repair was successful, click Done to end the
diagnostics session. The Summary Report screen appears:
19. Print report: Review the test summary on screen. Tap the Print
button to provide the customer with a hard copy report.
20. Send email: To send the diagnostics report to the customer, click on
E-mail, type the email address and then click Continue.
21. When done, follow the Target instructions to return the phone
connection settings.
48
Cellebrite Desktop User Manual
Chapter 7: Cellebrite Buy-Back
Chapter 7: Cellebrite Buy-Back
7.1. Overview
Cellebrite Desktop Buy-Back module (licensed separately), enables the sales and service representative to offer the
customer with a value for an old mobile phone. The offer is activated while the old phone is connected to the
Cellebrite Desktop, either for upgrading, transferring personal data to a new phone or at the end of a failed diagnostics
process.
The Buy-Back module offers the following:
A user friendly wizard for the phone evaluation and offer process.
Integrated diagnostics procedure to check phone condition.
Real time buying price for the old phone from a second-hand phone broker’s pricing database.
Voucher of the agreed price from the second-hand phone broker.
The evaluating questions and price quotes varies from one broker to another.
Cellebrite Desktop User Manual
49
Chapter 7: Cellebrite Buy-Back
7.2. Offering Buy-Back
Select and attach source
phone
Evaluate phone
Make an offer
Close the deal
To Offer Buy-Back:
50
1.
Network connection: Make sure the Cellebrite Desktop is connected
to the LAN via the Ethernet port or the wireless connection.
2.
Select Buy-Back: From the main menu, select Buy-Back to start the
trade in process. The Search Model Vendor screen is displayed.
3.
Select and attach source phone: Use Autodetect or manually select
the vendor and model, and attach the phone it to the source port. For
more information see ‎2.3 Selecting source and target phones on page
11. The Diagnostics Tests in Progress screen appears followed by the
Detected Device screen.
4.
Review the tests results and click OK to continue. The Physical
Condition Evaluation screen appears:
5.
Evaluate the phone: Inspect the physical condition of the phone and
select the best description from the list.
Cellebrite Desktop User Manual
Chapter 7: Cellebrite Buy-Back
6.
Make the offer: Receive a price quote from the broker database and
present it to the customer.
7.
Close the deal: If the customer agrees to sell, produce the voucher and
hand it over to the customer. The Wipe Content screen appears
enabling you to erase data and personal content from the phone.
8.
Wipe phone content: Follow the instructions on the screen to erase
data and personal content from the phone.
Cellebrite Desktop User Manual
51
Chapter 8: Settings
Chapter 8: Settings
8.1. Overview
The Cellebrite Desktop Settings screens enable the user to customize the default settings, perform manual updates,
view system information and more.
The following sections describe the settings procedures and options according to each settings tab.
To open the settings screen:
52
1.
From the toolbar menu, click on Settings. The Settings screen is
displayed:
2.
Click on the desired tab to open the relevant screen.
3.
Click OK to save the changes and exit the Settings screen.
Cellebrite Desktop User Manual
Chapter 8: Settings
8.2. General tab
8.2.1.
Change language
Cellebrite Desktop interface is translated to more than twenty languages. The following procedure describes how to
change the interface language.
To interface language
1.
From the toolbar menu, click on Settings. The Settings screen is
displayed.
2.
Click on the Change Language button. The Select Language dialog box
appears:
3.
Select the desired languages and then click on OK to return to the
Settings screen.
4.
Click OK to save the changes and exit the Settings screen.
5.
Restart the application.
Cellebrite Desktop User Manual
53
Chapter 8: Settings
8.2.2.
Custom phone lists
You can create a list of commonly used source and target phones to ease the process of selecting phone vendor and
model.
To create a phone custom list:
1.
Select Settings from the toolbar menu to open the Settings screen.
2.
Under the General tab, click on the Edit Custom List button. The
Custom List dialog box appears:
3.
In the Custom List dialog, select Source or Target to choose which list
of phones you wish to edit.
4.
Select a phone manufacturer to open a list of available phone models.
5.
Select each phone that you wish to appear in the destination list.
Selected phones will be indicated with a checkmark in the bottom
right corner. To clear a selection, click on it again.
6.
When you are done selecting phone models of a specific vendor, click
the Back button. Click Finish to return to the Settings screen.
7.
Click OK to save the changes and exit the Settings screen.
Product upgrades will not impact the custom list settings.
54
Cellebrite Desktop User Manual
Chapter 8: Settings
8.2.3.
Set self service mode
Cellebrite Desktop can be used as a Self Service station by the customer. Using password activation the self service
mode disables unauthorized access to the settings menu and the exit button and activates a “homing” mechanism that
returns the unit to the Main Menu screen if it is not being used for a set period of time.
To set self service mode:
1.
Select Settings from the toolbar menu to open the Settings screen.
2.
Under the General tab, check the Enable Self Service Mode check
box. The password dialog box appears:
3.
Enter your password (default password is 123456), and click OK.
4.
Enter a new password and click the Save Password button.
5.
Use the Load user approval from USB or the Load user approval from
web to load a user consent form to be presented before each
transaction.
6.
When done, click OK to save the changes and exit the Settings screen.
Cellebrite Desktop User Manual
55
Chapter 8: Settings
8.3. Transfer tab
Cellebrite Desktop enables you to customize the transfer options to your needs. Transfer options may vary depending
on the customer specifications.
8.3.1.
Transfer options
To change the transfer options:
1.
Select Settings from the toolbar menu to open the Settings screen.
2.
Under the Transfer tab, check the desired option check box:
Enable transaction estimation time: Enables and displays transfer time estimations when selecting content types to transfer.
Allow blocking multimedia files according to its size on transfer/backup: Enables size threshold settings to omit big multimedia files when selecting content types to transfer
Swap first and last name in phonebook transfer: When transferring phone book replace first and last name.
Install content after transfer or restore: Offer side load during transfer and restore procedures.
Propose BuyBack after Transfer: Offer buy back at the end of a Transfer procedure.
3.
56
When done, click OK to save the changes and exit the Settings screen.
Cellebrite Desktop User Manual
Chapter 8: Settings
8.4. Reporting tab
8.4.1.
Cellebrite Analytics reporting
Cellebrite Desktop automatically reports the transactions to the Cellebrite Data Analytics (CDA) on a predefined
schedule. However you can perform a manual report in case the computer running the Desktop application was not
connected to a network at the time of last scheduled report.
To perform a manual transactions report:
1.
Select Settings from the toolbar menu. The Settings screen appears:
2.
Under the Report tab, click Update now to start the report procedure.
3.
When done, click OK to save the changes and exit the Settings screen.
8.4.2.
Store agent ID
According to the customer specifications, each transaction can be
associated to a specific store agent. * Store agent ID is an optional feature.
To add a store agent ID to the transaction report:
1.
Select Settings from the toolbar menu.
2.
Under the Report tab, check the Enable Store Agent ID tap OK to save
the changes and exit the Settings screen. The following screen will appear after selecting a main menu option.
Cellebrite Desktop User Manual
57
Chapter 8: Settings
To erase the store agent ID list:
58
1.
Select Settings from the toolbar menu.
2.
Under the Report tab, tap on Clear history and then tap OK to save the changes and exit the Settings screen.
Cellebrite Desktop User Manual
Chapter 8: Settings
8.5. Update tab
8.5.1.
Software update
Cellebrite continuously updates its software, providing support for new phones by the various phone vendors. The
update process installs these various updates on your computer.
You can upgrade your Cellebrite Desktop by using either of the following two methods:
Automatically - Connect the computer to your network via the Ethernet port on the back panel or via a wireless connection. Cellebrite Desktop will automatically check the Cellebrite website for updates.
Manually - by downloading the upgrade directly from a server, or downloading to an external drive and installing it from there.
NOTE: If the update fails, check to make sure that your network connection is working properly.
Cellebrite Desktop User Manual
59
Chapter 8: Settings
8.5.2.
Manual software upgrades
To perform a software update:
60
1.
Select Settings from the toolbar menu. The Settings is displayed.
2.
Under the Update tab, click on Refresh to see of the Software update
server holds an updated version.
3.
If an updated version exists:
Click on Server to install the software update from the server.
Or
Download the software update file on a USB mass storage device,
insert the USB mass storage device into a USB port and tap USB.
4.
Select the application package you want to install and then tap Install
Package.
5.
The update process starts. When done, the device will restart
automatically.
Cellebrite Desktop User Manual
Chapter 8: Settings
8.5.3.
Installing product license
When using the Cellebrite Desktop for the first time or following a system
recovery, you need to get the operating license installed.
To install a license
1.
Select Settings from the toolbar menu to open the Settings screen.
2.
Under the Update tab, select the source from where you want to
retrieve the license key.
3.
Follow the instructions on the screen to complete the installation.
8.5.4.
Refresh content
Cellebrite Desktop automatically checks for content updates on a predefined schedule. However you can perform a
manual update in case the computer running the Desktop application was not connected to a network at the time the
last update was released.
To perform content updates
1.
Select Settings from the toolbar menu to open the Settings screen.
2.
Under the Update tab, click the Refresh Content button. The
following screen appears:
3.
When done, click OK to save the changes and exit the Settings screen.
Cellebrite Desktop User Manual
61
Chapter 8: Settings
8.6. Support tab
8.6.1.
Application Logs
The Application Logs are used to save operating information onto a set of files that can be used by Cellebrite support
personal to troubleshoot a faulty device.
To save application log files
62
1.
Select Settings from the toolbar menu to open the Settings screen.
2.
Insert a USB mass storage device into one of USB ports of the
computer.
3.
Under the Support tab, click on the Save Logs button. When done, the
following screen appears:
4.
Click OK to save the changes and exit the Settings screen. Remove the
USB mass storage device and send the log files via Email to Cellebrite
support.
Cellebrite Desktop User Manual
Chapter 8: Settings
8.6.2.
Transaction Logs
The Transaction Logs are used to save detailed information of one transaction onto a set of files that can be used by
Cellebrite support personal to troubleshoot a suspected faulty transaction (Transfer, Backup, Restore, etc.). The
Transaction log must be activated prior to performing the transaction.
To save transaction log files
1.
Select Settings from the toolbar menu to open the Settings screen.
2.
Under the Support tab, tap the Activate button. The Support Logs
Activated screen appears.
3.
Insert a USB mass storage device into the rear panel USB port. Click
OK to approve the activation and return to the settings tab.
4.
5.
Click OK to save the changes and exit the Settings screen.
Perform the suspected transaction. When done, remove the USB mass storage device and send the log files via
Email to Cellebrite support.
Cellebrite Desktop User Manual
63
Chapter 8: Settings
8.7. About tab
8.7.1.
System & version information
The About tab enables you to view important system information including the version and build numbers of the
installed software, the region that the Desktop installation is associated to, the serial number of the installation as well
as a list of the supported phone models.
To view system information & version:
64
1.
Select Settings from the Toolbar menu, the Settings screen appears.
2.
From the Settings screen, select the About tab. The following screen
appears:
3.
When done, click OK to exit the Settings screen.
Cellebrite Desktop User Manual
Appendix A: Data Access Application
Appendix A: Data Access Application
When transferring data from or to legacy Smartphones and PDAs, you may be instructed to manually upload a client
application that enables access to the phone memory. During this process, Cellebrite Desktop will always guide you
with prompts and instructions.
To upload client application manually:
1.
Phone settings: Before you start, ensure that the phone’s date is set correctly.
2.
Client upload: Upload the client installation file to the phone.
Symbian-based phones require that you set Software Installation to "All" and Online Certificate Check to
"Off". These Settings are typically found under MenuKey/Settings/Phone Settings/Applications/App Manager. During the client upload, you will need to select “PC Suite” before continuing.
3.
Install client prompt: Follow the instructions on the Cellebrite Desktop display to start the client installation on
the phone.
4.
Install the Cellebrite Phonebook exchanger: Using the phone’s menu, navigate to the installation file that was just
uploaded, and run it. The exact menu path appears on the touch screen, for reference.
5.
Run the client: Run the client application. You can identify it by the
icon.
After completing the entire transfer/backup/restore process, you can uninstall the client from the phone.
To do this, use the phone’s application manager.
Cellebrite Desktop User Manual
65
HEADQUARTERS
Cellebrite Ltd.
94 Em Hamoshavot St.
Petah Tikva 49130,
Israel
Tel:
+972 3 926 0900
Fax: +972 3 924 7104
USA
Cellebrite USA Inc.
7 Campus Drive, Suite 210
Parsippany, NJ 07054
USA
Tel:
+1 201 848 8552
Fax: +1 201 848 9982
GERMANY
Cellebrite GmbH
Am Hoppenhof 32a
33104 Paderborn
Germany
Tel:
+49 52 51 54 64 90
Fax: +49 52 51 54 64 49
APAC
Cellebrite APAC PTE Ltd.
150 Beach Road
#08-05 Gateway West
Singapore 189720
Tel:
+65 6438 6240
Fax: +65 6438 6280
LATAM
Cellebrite Ltfa.
Av Nacoes Unidas 14.171,
Marble Tower, Suite 1525
São Paulo, SP
Brazil 04794-000
Tel:
+55 11 3568-2320
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising