Air Impact Wrench P
Complete air tool solutions
Air Impact Wrench
P.7
NC-4610
Air Impact Wrench
P.8
NC-4210
Air Impact Wrench
P.10
NC-4230
Air Impact Wrench
P.11
NC-6210
1
Complete air tool solutions
Warning:
All the pneumatic tools should only be used as hand operated tools. They are powered by compressed
air and are not insulated against electric shock.
Always turn off the air supply and disconnect the air hose before changing or replacing any inserted
tool and accessory.
Before using these tools, make sure that all couplings and plugs are securely fastened. Air hoses which
are under pressure may lash out when disconnecting, that can lead to serious injury!
High sound levels may cause hearing damage. Always wear hearing protection when operating this tool.
Wearing eye/face protection can reduce the danger of high-speed materials being emitted from the tool.
Make sure that the direction of the spark generated from the cutting wheel grinding wheel or shank
stone is properly directed so as to not create a hazard..
Always wear gloves to reduce risk
User must wear proper clothing. Loose clothing, long hair, stings, straps, belts and jewelry should not be
worn when operating this tool.
Long periods of prolong use will cause fatigue. Periodic breaks are recommended for user safety.
It is recommended to stop operating the tool whenever discomfort, tingling or pain occurs during use.
Make sure there is no gas or combustible material stored near the tool when servicing, changing insert
tools, or storage.
Wearing proper breathing protection to avoid inhale dust or handling debris from working process,
which can be harmful to the health.
Fatigue lifetime tester for air impact wrench
2
Torque tester for air impact wrench
Fatigue lifetime tester for air screwdriver
Fracture tester for air impact wrench
Complete air tool solutions
M7's Success Is A Team
Effort!
Mighty Seven, or M7 as it is affectionately
called by thousands of users world-wide, is
much more than just a good manufacturer
of air tools. In fact, M7 provides a total
brand solution for its air tool partners
and consumers. M7's team is composed
of a strong network of International air
tool experts and an enthusiastic team
of engineers, designers, marketeers and
administration personnel.
Greater Partner Support
To its world-wide distributors, M7 is
the ideal alternative air tool brand. M7
guarantees a durable and strong product
at very affordable prices. M7 delivers
its promise through time-saving logistic
planning, strong after market support and
on-location dealer training. M7 strengthens
its manufacturing excellence proposition
with a committed marketing and sales
team that supports its partners in all
aspects of their business. Client support
through strengthening Distributor/Dealer
partnerships with more centralized brand
and marketing offerings, as well as technical
training is the basis for M7's growth.
The Beginning of A Great
Adventure
Mighty-Seven is a manufacturer with more
than 20 years of experience in supplying
the market with quality tools that last
longer. But 20 years signals only the
beginning. Mighty-Seven has reorganized its
brand activities to strengthen its position in
the international pneumatic tool market.
M7's focus is squarely set on after market
services, new product development
and full suppor t to market for its
partners in the field of pneumatic tools.
Consistent with its vision for “greater
par tner suppor t”, Mighty Seven is
able to offer comprehensive branding
and manufacturing ser vices to its
International partners through its global
distribution centers in France, Germany,
Mexico, China, USA and Taiwan. M7
offers comprehensive technical support
and total branding service solutions
to its world-wide distributors who
subsequently are able to provide the
consumer with a true M7 Experience.
Technical Support
M7 offers complete face to face, on-line
and media-supported training programs
for its clients' service technicians. M7
specialists and consultants provide
re g u l a r s a l e s t r a i n i n g c o u r s e s t o
demonstrate the products' applications,
features, and benefits to the customer.
M7 also provides repair and maintenance
training to strengthen its clients' aftersales service.
As part of its exclusive partner support
p a c k a g e , M i g h t y S eve n s u p p l i e s a
complete set of maintenance manuals
and training videos to its authorized
service partners. Furthermore, to meet
the immediate requirements of its clients,
M7 offers e-learning through its website
to give its marketing partners access to
24 hour on-line service and support.
M7 training program
3
Complete air tool solutions
4
Complete air tool solutions
Quality Assurance
A Strong Brand Starts
With A Strong Product Proposition
To meet international quality standards, M7 has invested time, money
and efforts into developing a complete quality control process, ensuring
that each and every product bearing the M7 brand, exceeds our clients
expectations in every way.
Testing equipments used in M7 includes: computerized fatigue testing
machines, digital torque testing machines, multi-functional testing
machines, grinding efficiency testers, run-out testers, digital measuring
projectors, environmental testing chamber, grinding and polishing
machines, infrared tachometers, vibrations testers and decibel level
detectors.
M7 designs, develops, manufactures and distributes tools to
maximize productivity and improve operator comfort. To
meet the challenges and marketing demands worldwide, M7's
R&D department is committed to market-orientated product
development to provide consumers with more ergonomic,
comfortable, lightweight, and efficient tools and equipment.
The Mighty Seven name is synonymous with product durability
and customer support. M7 tools are reliable, efficient and
tough enough to make difficult jobs easier. M7 has grown
through product innovation, always insisting on product quality
and durability. All of its products are ISO and CE approved to
support its customers with a tool that is cost-effective, durable
and efficient.
The M7 Product Range
As of today, Mighty-seven offers a wide Pneumatic product spectrum. And how
does Mighty Seven know which tools you need ? M7 listens to you.
AIR HYDRAULIC RIVETER
50
16
AIR GREASE GUN
58
AIR DIE GRINDER
18
AUTO REPAIR TOOL
60
AIR ANGLE GRINDER
22
AIR BLOW GUN
62
AIR BELT SANDER
26
FILTER, REGULATOR, LUBRICATOR
64
AIR SANDER
28
AIR HOSE & AIR ADAPTOR
66
AIR SHEAR
32
NEW PRODUCTS
68
AIR SAW
34
IMPACT SOCKET & ACCESORIES
76
AIR DRILL
36
AFTER MARKET SUPPORT
80
AIR SCREWDRIVER
42
AFTER MARKET REPAIR KITS
84
AIR HAMMER
46
TROUBLE SHOOTING
86
AIR IMPACT WRENCH
AIR RATCHET WRENCH
6
5
Complete air tool solutions
6
Air Impact Wrench
Complete air tool solutions
NC-3111
3/8" Drive Air Impact Wrench Pin Clutch Type
Air Inlet: 1/4" + Equipped with Pin Clutch Impact mechanism.
+ Low noise, stable and smooth torque output during
operation. Exceptional durability, easy to maintain.
10 pieces are packed in one carton
NC-3210
3/8" Drive Air Impact Wrench Twin Hammer Type
Air Inlet: 1/4" + Equipped with Twin Hammer Impact mechanism.
+ Low noise, light weight, yet strong & powerful.
+ Compact volume, ideal for confined working environment.
10 pieces are packed in one carton
NC-4131/4141
1/2" Drive Air Impact Wrench Pin Clutch Type
Air Inlet: 1/4" + Equipped with Pin Clutch Impact mechanism.
+ NC-4141 is equipped with 2” extended anvil.
+ Extremely stable and smooth torque output during operation.
10 pieces are packed in one carton
115.5mm
NC-4610
180mm
1/2" Drive Air Impact Wrench Jumbo Hammer Type
Air Inlet: 1/4" + As long as 115.5mm only, which is the shortest model
among all 1/2” impact wrenches available in the market.
+ The maximum torque can reach high up to 500 FT-LB.
+ Outstanding shape for using feeling , ergonomic design for
comfortable operation.
10 pieces are packed in one carton
(mm)
NC-3111
3/8"
1/2"(13)
NC-3210
3/8"
1/2"(13)
NC-4131
(Nm)
70-130(95-176)
(Nm)
(L/min)
PSI(bar)
(mm)
(Kg)
160(216)
9000
4.0(113)
90 (6.3)
6-7/16" (163)
3.5(1.6)
3/8"
93.3
4.1
100-300(136-407) 350(474)
10000
4.0(113)
90 (6.3)
5-5/8" (142)
3.3(1.5)
3/8"
92.1
3.6
1/2"
5/8"(16) 150-350(203-475) 450(610)
7000
4.2(119)
90 (6.3)
7-7/8" (200)
5.3(2.4)
3/8"
95.1
2.7
NC-4141
1/2"
5/8"(16)
150-350(203-475) 450(610)
7000
4.2(119)
90 (6.3)
9-3/8" (238)
5.5(2.5)
3/8"
95.1
2.7
NC-4610
1/2"
5/8"(16)
200-350(271-475) 450(610)
9000
4.4(124)
90 (6.3)
3/8"
93.0
2.8
4-9/16" (115.5) 3.52(1.6)
7
Complete air tool solutions
Air Impact Wrench
NC-4210
1/2" Drive Air Impact Wrench Twin Hammer Type
Air Inlet: 1/4" + Equipped with Twin Hammer Impact mechanism.
+ Low noise, light weight, yet strong & powerful.
+ Compact volume, ideal for confined working environment.
10 pieces are packed in one carton
NC-4210N
1/2" Drive Air Impact Wrench Kit Twin Hammer Type
Air Inlet: 1/4" + Stubby impact sockets, 6 points:5pcs 13, 17,19, 22, 24, mm
+ 1/4" plug:1pc
+ Equipped with Twin Hammer Impact mechanism.
+ Low noise, light weight, yet strong & powerful.
+ Compact volume, ideal for confined working environment.
10 pieces are packed in one carton
NC-4213/4223
1/2" Drive Air Impact Wrench Twin Hammer Type
Air Inlet: 1/4" + Equipped with Twin Hammer Impact mechanism.
+ Efficient & reliable torque output during operation.
+ Handle exhaust efficiently reduces the noise and
directs air away from the working spot.
+ NC-4223 is equipped with 2” extended anvil.
10 pieces are packed in one carton
(mm)
8
(Nm)
(Nm)
(L/min)
PSI(bar)
(mm)
(Kg)
NC-4210
1/2"
5/8"(16)
150-350(203-475)
400(542)
10000
4.2(119)
90(6.3)
5-5/8"(142)
3.5(1.6)
3/8"
90.6
2.8
NC-4210N
1/2"
5/8"(16)
150-350(203-475)
400(542)
10000
4.2(119)
90(6.3)
5-5/8"(142)
3.5(1.6)
3/8"
90.6
2.8
NC-4213
1/2"
5/8"(16)
180-400( 244-542) 600(813)
6500
4.2(119)
90(6.3)
7-3/16"(182)
6.2(2.8)
3/8"
91
3.8
NC-4223
1/2"
5/8"(16)
180-400( 244-542) 600(813)
6500
4.2(119)
90(6.3)
9-1/4"(232)
6.4(2.9)
3/8"
91
3.8
Complete air tool solutions
NC-4217
1/2" Drive Air Impact Wrench Twin Hammer Type
Air Inlet: 1/4" + Equipped with Twin Hammer Impact mechanism.
+ Common applications are overall automotive
service and body shop.
8 pieces are packed in one carton
NC-4212/4222
1/2" Drive Air Impact Wrench Twin Hammer Type
Air Inlet: 1/4" + Twin Hammer mechanism provides fast and instant
balance torque output.
+ 4 pieces parts, easy to do the maintenance.
+ Break loose a frozen or rusted bolt easily.
+ Six-Position power management.
+ For heavy automotive, pumps out 550 ft.-lbs. torque.
+ Equipped with Twin Hammer Impact mechanism.
+ Efficient & reliable torque output during operation.
+ Handle exhaust efficiently reduces the noise and
directs air away from the working area.
+ NC-4222 is equipped with 2” extended anvil.
8 pieces are packed in one carton
NC-4215/4225
1/2" Drive Air Impact Wrench NewTwin Hammer Type
Air Inlet: 1/4"
+ New Twin Hammer impact mechanism is equipped
to increase durability and efficiency.
+ Mechanism lubrication Auto-grease system.
+ 4 pieces parts, easy to do the maintenance.
+ Break loose a frozen or rusted bolt easily.
+ For heavy automotive, pumps out 700 ft.-lbs. torque.
+ The most durable model in this class.
+ Handle exhaust efficiently reduces the noise and
directs air away from the working area.
+ NC-4225 is equipped with 2” extended anvil.
8 pieces are packed in one carton
(mm)
(Nm)
(Nm)
(L/min)
PSI(bar)
(mm)
(Kg)
NC-4217
1/2"
5/8"(16)
150-320(203-434)
400(542)
7000
4.2(119)
90(6.3)
7-1/4"(184)
5.6(2.5)
3/8"
92.1
3.7
NC-4212
1/2"
5/8"(16)
150-300(203-407) 550(746)
7000
4.0(113)
90(6.3)
7-13/64" (182)
6.2(2.8)
3/8"
86.1
3.7
NC-4222
1/2"
5/8"(16)
150-300(203-407) 550(746)
7000
4.0(113)
90(6.3)
9-13/64" (233)
6.6(3.0)
3/8"
86.1
3.7
NC-4215
1/2"
3/4"(19)
180-400(244-542) 700(949)
6500
4.4(124)
90(6.3)
7-11/16" (195)
6.3(2.9)
3/8"
91.4
3.8
NC-4225
1/2"
3/4"(19)
180-400(244-542) 700(949)
6500
4.4(124)
90(6.3)
9-11/16"(246)
6.8(3.1)
3/8"
91.4
3.8
9
Complete air tool solutions
Air Impact Wrench
NC-4230/4240
1/2" Drive Air Impact Wrench Twin Hammer Type
Air Inlet: 1/4" + Equipped with Twin Hammer Impact mechanism.
+ Efficient & reliable torque output during operation.
+ Handle exhaust efficiently reduces the noise and
directs air away from the working spot.
8 pieces are packed in one carton
NC-4216/4226
1/2" Drive Air Impact Wrench Twin Hammer Type
Air Inlet: 1/4" + Equipped with Twin Hammer Impact mechanism.
+ Light weight composite main housing.
+ Forward / reverse and speed can be controlled
simultaneously only with Multi-function switch.
+ NC-4226 is equipped with 2” extended anvil.
+ Integrated cylinder & rear end plate allows stable
powerful output and easy to the maintenance dramatically.
10 pieces are packed in one carton
NC-4258
1/2" Drive Air Impact Wrench Twin Hammer Type
Air Inlet: 1/4" + Equipped with Twin Hammer Impact mechanism.
+ Quicker loosening saves time.
+ Common applications are overall automotive
service and body shop.
8 pieces are packed in one carton
(mm)
10
(Nm)
(Nm)
(L/min)
PSI(bar)
(mm)
(Kg)
NC-4230
1/2"
3/4"(19)
180-500(244-678) 700(949)
7500
4.5(127)
90(6.3)
6-15/32"(164)
5.5(2.5)
NC-4216
1/2"
5/8"(16)
180-400(244-542)
650(881)
9000
4.2(119)
90(6.3)
7-3/4" (195)
4.4(2.0)
NC-4226
1/2"
5/8"(16)
180-400(244-542)
650(881)
9000
4.2(119)
90(6.3)
8-7/8" (225)
NC-4258
1/2"
5/8"(16)
150-300(203-407)
400(542)
7000
4.2(119)
90(6.3)
7-1/4" (185)
3/8"
87
4.5
3/8"
93.9
4.5
4.8(2.2)
3/8"
93.9
4.5
5.6(2.5)
3/8"
93.2
4.4
Complete air tool solutions
NC-6113/6123
3/4" Drive Air Impact Wrench Pin Clutch Type
Air Inlet: 1/4" + Equipped with Pin Clutch Impact mechanism.
+ Extremely stable & reliable torque output during
operation.
+ Can be applied extensively.
+ NC-6123 is equipped with 6” extended anvil.
4 pieces are packed in one carton
NC-6212/6222
3/4" Drive Air Impact Wrench NewTwin Hammer Type
Air Inlet: 1/4" + New Twin Hammer impact mechanism increases
durability and efficiency.
+ Handle exhaust efficiently reduces the noise and
directs air away from the working spot.
+ The lightest model among 3/4” series of impact
wrenches.
+ NC-6222 is equipped with 2” extended anvil.
8 pieces are packed in one carton
NC-6210/6220
3/4" Drive Air Impact Wrench Twin Hammer Type
Air Inlet: 1/4" + Twin Hammer impact mechanism increases
durability and efficiency.
+ Stronger power output improves performance and accuracy.
+ NC-6220 is equipped with 6” extended anvil.
8 pieces are packed in one carton
(mm)
(Nm)
(Nm)
(L/min)
PSI(bar)
(mm)
10" (252)
NC-6113
3/4"
1"(25)
150-600(203-814) 850(1153)
4500
7(198)
90(6.3)
NC-6123
3/4"
1"(25)
150-600(203-814) 850(1153)
4500
7(198)
NC-6212
3/4"
3/4" (19) 180-400(244-542) 750(1017)
6300
NC-6222
3/4"
3/4" (19) 180-400(244-542) 750(1017)
NC-6210
3/4"
3/4" (19)
180-600(244-810) 750(1017)
(Kg)
10.1(4.6)
1/2"
94.3
7.2
90(6.3)
14-3/16" (360) 11.6(5.3)
1/2"
94.3
7.2
4.4(124)
90(6.3)
7-61/64" (227)
6.6(3.0)
1/2"
88.1
7.8
6300
4.4(124)
90(6.3)
10-1/4" (260)
7.5(3.4)
1/2"
88.1
7.8
7500
4.5(127)
90(6.3)
6-45/64" (170)
5.61(2.55)
3/8"
87
4.5
11
Complete air tool solutions
Air Impact Wrench
NC-6215/6225
3/4" Drive Air Impact Wrench NewTwin Hammer Type
Air Inlet: 1/4" + New Twin Hammer impact mechanism increases
durability and efficiency.
+ Forward / reverse and speed can be controlled
simultaneously only with Multi-function switch.
+ Torque can be generated instantly.
+ NC-6225 is equipped with 6” extended anvil.
+ Handle exhaust efficiently reduces the noise and directs
air away from the working spot.
4 pieces are packed in one carton
NC-6216/6226
3/4" Drive Air Impact Wrench NewTwin Hammer Type
Air Inlet: 3/8" + New Twin Hammer impact mechanism increases
durability and efficiency.
+ Stronger power output improves performance and accuracy.
+ NC-6226 is equipped with 6” extended anvil.
+ Forward / reverse and speed can be controlled
simultaneously only with Multi-function switch.
4 pieces are packed in one carton
NC-8212
1" Drive Air Impact Wrench NewTwin Hammer Type
Air Inlet: 3/8"
+ New Twin Hammer impact mechanism increases
durability and efficiency.
+ Stronger power output improves performance and accuracy.
+ Forward / reverse and speed can be controlled
simultaneously only with Multi-function switch.
4 pieces are packed in one carton
(mm)
12
(Nm)
(Nm)
(L/min)
PSI(bar)
(mm)
(Kg)
NC-6215
3/4"
1"(25)
180-600(244-810) 900(1220)
6500
7(198)
90(6.3)
9-7/32" (234)
10.0(4.5)
1/2"
91.5
10.8
NC-6225
3/4"
1"(25)
180-600(244-810) 900(1220)
6500
7(198)
90(6.3)
13-3/4" (350)
10.8(4.9)
1/2"
91.5
10.8
NC-6216
3/4"
1-1/16"(27) 200-1000(271-1356) 1200(1627)
6000
6.0 (170)
90(6.3)
9-1/4" (235)
9.0(4.1)
1/2"
91.2
5.0
NC-6226
3/4"
1-1/16"(27) 200-1000(271-1356) 1200(1627)
6000
6.0 (170)
90(6.3)
13-3/4" (350)
9.9(4.5)
1/2"
91.2
5.0
NC-8212
1"
1-1/16"(27) 200-1000(271-1356) 1300(1762)
6000
6.0 (170)
90(6.3)
9-1/4"(235)
9.68(4.4)
1/2"
91.2
5.0
Complete air tool solutions
NC-8219
1" Drive Air Impact Wrench New Twin Hammer Type
Air Inlet: 1/2" + New Twin Hammer mechanism equipped. More
power and prolong lifetime.
+ The anvil is made by nickel chrome molybdenum
and well heat treatment.
+ Side exhaust include silencer reduce the noise.
2 pieces are packed in one carton
NC-8321/8341
1" Drive Air Impact Wrench Pin Less Type
Air Inlet: 1/2" + Equipped with Pin-less impact mechanism.
+ Stable & smooth torque output during operation.
+ Inside the handle trigger design helps to prevent
accidental start.
+ NC-8341 is equipped with 8” extended anvil.
2 pieces are packed in one carton
NC-8311/8351
1" Drive Air Impact Wrench Pin Less Type
Air Inlet: 1/2" + Equipped with Pin-less impact mechanism.
+ Stable & smooth torque output during operation.
+ Inside the handle trigger design helps to prevent
accidental start.
+ NC-8351 is equipped with 8" extended anvil.
2 pieces are packed in one carton
(mm)
(Nm)
(Nm)
(L/min)
PSI(bar)
(mm)
NC-8219
1"
1-7/16"(36) 200-1600(271-2170) 1800(2441)
4000
11.0 (311)
90(6.3)
NC-8321
1"
1-3/8" (33) 200-1600(271-2170) 1800(2441)
4000
11.5(325)
90(6.3)
15" (380)
NC-8341
1"
1-3/8" (33) 200-1600(271-2170) 1800(2441)
4000
11.5(325)
90(6.3)
NC-8311
1"
1-3/8" (33) 200-1600(271-2170) 1800(2441)
4000
11.5(325)
NC-8351
1"
1-3/8" (33) 200-1600(271-2170) 1800(2441)
4000
11.5(325)
(Kg)
12-13/32"(315) 21.69(9.84)
1/2"
103.4
16.71
24.0(10.9)
1/2"
97
6.3
20" (510)
27.6(12.5)
1/2"
97
6.3
90(6.3)
15" (380)
24.0(10.9)
1/2"
101
7.3
90(6.3)
20" (510)
27.6(12.5)
1/2"
101
7.3
13
Complete air tool solutions
Air Impact Wrench
NC-8232
1" Drive Air Impact Wrench New Twin Hammer Type
Air Inlet: 1/2" + NEW TWIN HAMMER impact mechanism, superior lifespan.
+ The components of impact mechanism was made of
fine alloy steel, which well increases the durability
of the components.
+ The torque can be generated up to 1800 FT-LB within 5
seconds.
+ Ergonomic design for comfortable operation.
1 pieces are packed in one carton
NC-8322/8342
1" Drive Air Impact Wrench Pin Less Type
Air Inlet: 1/2" + Equipped with Pin-less impact mechanism.
+ Fast to gain max torque within 3 seconds.
+ Excellent for high volume works on trucks, buses
and heavy construction equipments…etc.
+ NC-8342 is equipped with 8” extended anvil.
1 pieces are packed in one carton
NC-9223
1-1/2" Drive Air Impact Wrench New Twin Hammer Type
Air Inlet: 1/2" + NewTwin Hammer mechanism provides fast and instant
balance torque output.
+ 4 pieces parts mechanism, easy to do the
maintenance.
+ Break loose a frozen or rusted bolt easily.
1 pieces are packed in one carton
(mm)
14
(Nm)
(Nm)
(L/min)
PSI(bar)
(mm)
NC-8232
1"
1-7/16" (36) 200-1600(271-2170) 1800(2441)
4000
11.0(311)
90(6.3)
NC-8322
1"
1-7/16"(36) 200-2000(271-2710) 2500(3390)
3300
11.0(284)
90(6.3)
17-5/16"(440)
NC-8342
1"
1-7/16"(36) 200-2000(271-2710) 2500(3390)
3300
11.0(284)
90(6.3)
20" (510)
NC-9223
1-1/2"
3000
16.0(453)
90(6.3)
2"(50)
200-3000(271-4065) 3500(4746)
(Kg)
20-13/32"(518) 24.86(11.3)
1/2"
102
11.5
34.2(15.5)
1/2"
93.9
8.8
38.0(17.3)
1/2"
93.9
8.8
17-3/4" (450) 42.29(19.7)
3/4"
104.52
8.86
Complete air tool solutions
NC-0415 (set)
1/2" Drive Impact Socket Wrench-Set 15pcs
+ 1pc-1/2" Air Impact Wrench
+ 10pcs-Impact sockets, 6 points, standard length
9, 10, 11, 13, 14, 17, 19, 22, 24, 27mm
+ 1pc-Extension bar 5"
+ 1pc-Allen Key : 4mm
+ 1pc-Mini Oiler 1/4" female x 1/4" male
+ 1pc-1/4" plug
5 pieces are packed in one carton
Item No.
Air lmpact Wrench
Item No.
Air lmpact Wrench
NC-0425M0
NC-4212
NC-0415M4
NC-4213
NC-0425M1
NC-4215
NC-0415M8
NC-4131
NC-0425M2
NC-4216
NC-0415M6
NC-4217
NC-0615 (set)
3/4" Drive Impact Socket Wrench-Set 15pcs
+ 1pc-3/4" Air Impact Wrench
+ 8pcs-Impact sockets, 6 points, standard length
26, 27, 29, 30, 32, 35, 36, 38mm
+ 1pc-Extension bar 7"
+ 1pc-Universal Joint
+ 2pcs-Allen Key : 4mm, 5mm
+ 1pc-Mini Oiler 1/4"-6113,6215 , 3/8"-6216
+ 1pc-1/4" plug - 6113.6215 , 3/8" plug - 6216
+ 1pc-O-Ring&Pin
2 pieces are packed in one carton
Item No.
Air lmpact Wrench
NC-0615M0
NC-6113
NC-0615M1
NC-6216
NC-0615M2
NC-6215
15
Complete air tool solutions
Air Ratchet Wrench
(Nm)
16
(Nm)
(L/min)
(bar)
(mm)
(Kg)
NE-251
1/4"
5-15(6.7-20)
22(30)
350
3.0(84.96)
90(6.3)
5"(125)
1.1(0.5)
3/8"
89
4.4
NE-351
3/8"
5-15(6.7-20)
22(30)
350
3.0(84.96)
90(6.3)
5"(125)
1.1(0.5)
3/8"
89
4.4
NE-211
1/4"
5-15(6.7-20)
18(24)
240
3.0(84.96)
90(6.3)
8"(205)
1.3(0.59)
3/8"
89.6
3.9
NE-311
3/8"
5-15(6.7-20) 18(24)
240
3.0(84.96)
90(6.3)
8"(205)
1.3(0.59)
3/8"
88.8
4.6
Complete air tool solutions
NE-251/351
1/4" Drive &3/8" Drive Stubby Air Ratchet Wrench
Air Inlet: 1/4" + Ratchet head has easy to use forward / reverse valve.
+ ldeal for confined working condifions.
+ Common applications are body shop repair,small
engine and under the dashboard work.
20 pieces are packed in one carton
NE-211/311
1/4" Drive &3/8" Drive Mini Air Ratchet Wrench
Air Inlet: 1/4" + High speed of revolution (R.P.M.) allows fast
positioning.
+ Compact & lightweight, ideal for confined working
environments.
+ Maximum Torque: 18ft-lbs.
20 pieces are packed in one carton
NE-321/ 421
3/8" Drive & 1/2" Drive Air Ratchet Wrench
Air Inlet: 1/4" + High speed of revolution (R.P.M.) allows fast
positioning.
+ Compact & lightweight, ideal for confined working
environments.
+ Maximum Torque: 50ft-lbs.
20 pieces are packed in one carton
NE-332/ 432
3/8" Drive &1/2" Drive Quick Release Air Ratchet Wrench
Air Inlet: 1/4" + Quick release button enables socket changing fast
and conveniently.
+ High speed of revolution (R.P.M.) allows fast
positioning.
+ Hardened gears, needle and ball bearings provide
longer lifetime.
+ Maximum Torque: 60ft-lbs.
20 pieces are packed in one carton
(Nm)
(Nm)
(L/min)
(bar)
(mm)
(Kg)
NE-321
3/8" 10-35(13.5-47) 50(68)
160
4.0(113.28)
90(6.3)
10-3/8"(265) 2.3(1.04)
3/8"
91.0
3.9
NE-421
1/2"
10-35(13.5-47) 50(68)
160
4.0(113.28)
90(6.3) 10-3/8"(265) 2.3(1.04)
3/8"
92.8
4.6
NE-332
3/8"
10-45(13.5-61) 60(81)
160
4.0(113.28)
90(6.3) 10-3/8"(265) 2.68(1.22) 3/8"
90.5
4.4
NE-432
1/2"
10-45(13.5-61) 60(81)
160
4.0(113.28)
90(6.3)
89.8
5.2
10-3/8"(265) 2.68(1.22) 3/8"
17
Complete air tool solutions
Air Die Grinder
QA-111A (Metric Size) ; QA-111B(lnch Size)
Air Die Grinder
Air Inlet: 1/4"
+ Handy & ergonomic design provides excellent
maneuverability.
+ Speed regulator allows controlling speed precisely.
+ Both 3 and 6mm or 1/8” and 1/4” collets are
included.
20 pieces are packed in one carton
QA-311A (Metric Size) ; QA-311B(lnch Size)
Extended Air Die Grinder
Air Inlet: 1/4" + Same features as QA-111, equipped with 1” extended working shaft.
12 pieces are packed in one carton
QA-313A (Metric Size) ; QA-313B(lnch Size)
Extended Air Die Grinder
Air Inlet: 1/4" + Same features as QA-111, equipped with 3” extended working shaft.
12 pieces are packed in one carton
QA-315A(Metric Size);QA-315B(lnch Size)
Extended Air Die Grinder
Air Inlet: 1/4" + Same features as QA-111, equipped with 5” extended working shaft.
12 pieces are packed in one carton
A
18
B
(L/min)
(bar)
(mm)
(Kg)
QA-111
6&3
1/4" & 1/8"
25000
10.0(283)
90(6.3)
6"(155)
0.3
0.84(0.38)
3/8"
81.5
1.8
QA-311
6&3
1/4" & 1/8"
25000
10.0(283)
90(6.3)
7-1/2"(190)
0.3
1.06(0.48)
3/8"
81.5
1.8
QA-313
6&3
1/4" & 1/8"
25000
10.0(283)
90(6.3)
9-1/4"(235)
0.3
1.28(0.58)
3/8"
81.5
1.8
QA-315
6&3
1/4" & 1/8"
25000
10.0(283)
90(6.3)
11"(280)
0.3
1.39(0.63)
3/8"
81.5
1.8
Complete air tool solutions
QA-211A(Metric Size); QA-211B(lnch Size)
Heavy Duty Air Die Grinder
Air Inlet: 1/4"
+ 0.9 HP high power motor efficiently handles the
toughest jobs.
+ Both 3 and 6mm or 1/8” and 1/4” collets are included.
20 pieces are packed in one carton
QA-611A (Metric Size); QA-611B(lnch Size)
90° Air Angle Die Grinder
Air Inlet: 1/4" + 90° working angle provides wide flexibility in
confined areas.
+ Both 3 and 6mm or 1/8” and 1/4” collets are included.
20 pieces are packed in one carton
QA-0215A(Set) (Metric Size); QA-0215B(Set)(lnch Size)
Heavy Duty Air Die Grinder-Set 15pcs
+ 1pc
+ 1pc
+ 2pcs
+ 5pcs
+ 5pcs
+ 1pc
Air Die Grinder
Collet (3 mm or 1/8")
Spanner Wrench
Grinder Stone (3 mm or 1/8")
Shank Stone (6 mm or 1/4")
Plug (adapter)
10 pieces are packed in one carton
(L/min)
(bar)
(mm)
(Kg)
QA-211A
6 & 3mm
20000
10.0(283)
90(6.3)
7-1/2"(190)
0.9
1.43(0.65)
3/8"
75.7
0.8
QA-211B
1/4" & 1/8"
20000
10.0(283)
90(6.3)
7-1/2"(190)
0.9
1.43(0.65)
3/8"
75.7
0.8
QA-611A
6 & 3mm
19000
10.0(283)
90(6.3)
6-1/8"(160)
0.3
1.12(0.51)
3/8"
74.4
1.7
QA-611B
1/4" & 1/8"
19000
10.0(283)
90(6.3)
6-1/8"(160)
0.3
1.12(0.51)
3/8"
74.4
1.7
19
Complete air tool solutions
20
Micro
Air Die Grinder
Complete air tool solutions
QA-412
Micro Air Die Grinder
Air Inlet: 1/4" + High quality bearings provides longer life time.
+ Low vibration helps to reduce noise and to ease the
control.
+ Ideal for machining dies, molds or other tiny
grinding necessities.
20 pieces are packed in one carton
QA-421
Micro Air Die Grinder
Air Inlet: 1/4" + Cushion handle grip provides non-slip surface.
+ Stainless steel front housing eliminates rust…
+ Ideal for machining dies, molds or other tiny grinding
necessities.
20 pieces are packed in one carton
QA-432
Micro Air Die Grinder
Air Inlet: 1/4" + High quality bearings efficiently increase the lifetime.
+ Low vibration helps to reduce noise and to ease
the control.
+ Ideal for machining dies, molds or other tiny
grinding necessities.
20 pieces are packed in one carton
QA-511
Engraving Pen
Air Inlet: 1/4" + Comfortable handle allows smooth operation.
+ Longer lifetime and lower vibration.
+ Stainless steel front housing eliminates rust.
20 pieces are packed in one carton
Hose
length
(L/min)
(mm)
(bar)
(mm)
(Kg)
QA-412
1/8" (3)
60000
2.7(76)
90(6.3)
6-3/4"(170)
1500
0.53(0.24)
3/8"
70.0
0.5
QA-421
1/8" (3)
60000
2.7(76)
90(6.3)
6"(150)
1500
0.49(0.22)
3/8"
70.0
0.5
QA-432
1/8" (3)
70000
1.0(29)
90(6.3)
5-3/8"(137)
1425
0.4(0.20)
3/8"
70.0
0.5
1.0(29)
90(6.3)
5-1/2"(140)
1420
0.5(0.23)
3/8"
78.0
0.6
QA-511
13000
21
Complete air tool solutions
22
Air Angle Grinder
Complete air tool solutions
23
Complete air tool solutions
Air Angle Grinder
QB-104 / 105
Air Angle Grinder / Roll Type Throttle
Air Inlet: 1/4" + Front exhaust.
+ Powerful 0.78 hp motor provides sufficient power
for most grinding necessities.
+ Strengthened alloy steel bevel gears dramatically
improve performance and durability.
Note:The grinding wheel is not supplied along with the tool.
10 pieces are packed in one carton
QB-114 / 115
Air Angle Grinder / Lever Type Throttle
Air Inlet: 1/4" + Same features as QB-104 / QB-105, but equipped
with safety throttle lever.
Note:The grinding wheel is not supplied along with the tool.
10 pieces are packed in one carton
QB-124 / 125
Air Angle Grinder / Lever Type Throttle
Air Inlet: 1/4" + Rear exhaust.
+ Powerful 0.8 hp motor provides sufficient power for
most grinding necessities.
+ Composite material housing reduces the weight and
improves comforts of operation.
Note:The grinding wheel is not supplied along with the tool.
10 pieces are packed in one carton
Pad Dia
24
Spindle
Size
(L/min)
(bar)
(kg)
(mm)
QB-104
4"(100)
3/8"-24
11000
6.0(170)
90(6.3)
8-7/8"(226)
0.78
4.0(1.81)
3/8"
87.8
1.2
QB-105
5"(125)
3/8"-24
11000
6.0(170)
90(6.3)
8-7/8"(226)
0.78
4.0(1.81)
3/8"
87.1
1.2
QB-114
4"(100)
3/8"-24
11000
6.0(170)
90(6.3)
9"(230)
0.78
4.0(1.81)
3/8"
87.8
1.2
QB-115
5"(125)
3/8"-24
11000
6.0(170)
90(6.3)
9"(230)
0.78
4.0(1.81)
3/8"
87.1
1.2
QB-124
4"(100)
3/8"-24
11000
6.0(170)
90(6.3)
9" (230)
0.8
3.8(1.73)
3/8"
85.7
3.0
QB-125
5"(125)
5/8"-11
11000
6.0(170)
90(6.3)
9"(230)
0.8
3.9(1.78)
3/8"
87
5.9
Complete air tool solutions
QB-134/ 135
Air Angle Grinder / Lever Type Throttle
Air Inlet: 1/4" + Same features as QB-104 / QB-105, but equipped
with safety throttle lever.
Note:The grinding wheel is not supplied along with the tool.
10 pieces are packed in one carton
QB-107
Air Angle Grinder / Roll Type Throttle
Air Inlet: 3/8" + Front exhaust.
+ Powerful 1.0 hp motor provides plenty of power for
rust and material removal.
+ Unique motor controller (Governor) virtually
eliminates over speed.
Note:The grinding wheel is not supplied along with the tool.
6 pieces are packed in one carton
QB-117
Air Angle Grinder / Lever Type Throttle
Air Inlet: 3/8" + Same feature as QB-107, but with safety throttle lever.
Note:The grinding wheel is not supplied along with the tool.
6 pieces are packed in one carton
QC-213
Heavy Duty Air Cut-Off Tool Wheel Size: 3” (76mm)
+ 0.9 hp high power motor.
+ Cast aluminum housing for longer lifetime.
+ Excellent for cutting rusted bolts, nuts, muffler
clamps or hangers, sheet metal, fiberglass…etc.
20 pieces are packed in one carton
Pad Dia
Spindle
Size
(L/min)
(bar)
(kg)
(mm)
QB-134
4"(100)
M10xP1.5
11000
6.0(170)
90(6.3)
9"(230)
0.78
4.0(1.81)
3/8"
87.8
1.2
QB-135
5"(125)
M14xP2.0
11000
6.0(170)
90(6.3)
9"(230)
0.78
4.0(1.81)
3/8"
87.1
1.2
QB-107
7"(178)
7000
9.0(255)
90(6.3)
11-1/4"(290)
1.0
7.1(3.24)
1/2"
89.7
1.0
QB-117
7"(178)
7000
9.0(255)
90(6.3)
13-1/2"(343)
1.0
7.1(3.24)
1/2"
89.7
1.0
20000
10(283)
90(6.3)
7-7/8''(200)
0.9
1.9(0.86)
3/8''
80.2
10.8
QC-213
25
Complete air tool solutions
26
Air Belt Sander
Complete air tool solutions
QB-311
Air Belt Sander
Air Inlet: 1/4" + The running position of sanding belt can be
easily adjusted.
+ Working angle can be set freely.
20 pieces are packed in one carton
QB-312
Air Belt Sander
Air Inlet: 1/4" + The running position of sanding belt can be easily
adjusted.
+ Working angle can be set freely.
10 pieces are packed in one carton
QB-313
Air Belt Sander
Air Inlet: 1/4" + Superior lifespan.
+ Direct-drive motor, less easy-to-wear components needed.
+ Ergonomic design for comfortable operation.
+ Using standard 30mm sanding belt, enhance wider
removing area.
6 pieces are packed in one carton
Belt Size
(L/min)
(bar)
(mm)
(Kg)
QB-311
3/8"x13"(10x330)
16000
8.0(226)
90(6.3)
11-1/2"(290)
1.76(0.80)
3/8"
89.7
0.5
QB-312
3/4"x19"(20x520)
16000
9.0(254)
90(6.3)
14"(360)
2.65(1.20)
3/8"
91.8
0.4
QB-313
1-3/16"x21-1/4"(30x540)
13000
10(283)
90(6.3)
15-3/8"(390)
5.28(2.4)
3/8"
81
1.2
27
Complete air tool solutions
28
Air Sander
Complete air tool solutions
QB-52
Air Random Orbital Sander / Non-Vacuum
Air Inlet: 1/4" + Rubber palm grip allows one hand operation.
+ 3/16" (5mm) orbit for fine finishes.
+ Excellent for refinishing or smoothing the surface
of metal, wood, leather…etc.
8 pieces are packed in one carton
QB-53
Air Random Orbital Sander
/ Self-Generated Vacuum
Air Inlet: 1/4" + Equipped with 6 holes Velcro pad.
+ Rubber palm grip allows one hand operation.
+ 3/16" (5mm) orbit for fine finishes.
+ Hook (velcro) pad with 6 hole.
+ Excellent for refinishing or smoothing the surface of
metal, wood, leather…etc.
8 pieces are packed in one carton
QB-48111
Air Jitterbug Sander / Non-Vacuum
Air Inlet: 1/4" + Spring cock can reduce the material cost of abrasive
paper.
+ Elastic mechanism for durability and long lifespan.
+ Lower body with low center designed, while
operating can be steady with face.
12 pieces are packed in one carton
Pad Dia
(L/min)
(bar)
(mm)
(Kg)
QB-52502
5"(127)
10000
6(170)
90(6.3)
6"(153)
0.24
2.2(1.00)
3/8"
87.6
0.7
QB-52602
6"(152)
10000
6(170)
90(6.3)
6-1/2"(166)
0.24
2.65(1.20)
3/8"
87.6
1.7
QB-53802
5"(127)
10000
6(170)
90(6.3)
6"(153)
0.24
2.2(1.00)
3/8"
86.2
0.5
QB-53902
6"(152)
10000
6(170)
90(6.3)
6-1/2"(166)
0.24
2.65(1.20)
3/8"
80.1
1.2
7.0(198)
90(6.3)
5-1/5"(130)
0.28
2.0(0.91)
3/8"
83
1.5
QB-48111 4"x4-3/8"(100x110)11000
29
Complete air tool solutions
Air Sander
QB-45
Air Random Orbital Sander / Central-Vacuum
Air Inlet: 1/4" + Convenient air / speed regulator.
+ Rubber palm grip allows one hand operation.
+ 3/16" (5mm) orbit for fine finishes.
+ Hook (Velcro) pad with 6 hole.
+ Excellent for refinishing or smoothing the surface of
metal, wood, leather…etc.
10 pieces are packed in one carton
QB-46
Air Random Orbital Sander / Non-Vacuum
Air Inlet: 1/4" + Rubber palm grip allows one hand operation.
+ Convenient air / speed regulator.
+ Excellent for refinishing or smoothing the surface of metal,
wood, leather…etc.
+ 3/16" (5mm) orbit for fine finishes.
10 pieces are packed in one carton
QB-47
Air Random Orbital Sander
/ Self-Generated Vacuum
Air Inlet: 1/4" + Equipped with 6 holes hook (Velcro) pad.
+ Rubber palm grip allows one hand operation.
+ Convenient air / speed regulator.
+ Excellent for refinishing or smoothing the surface of
metal, wood, leather…etc.
+ 3/16" (5mm) orbit for fine finishes.
+ Hook (velcro) pad with 6 hole.
6 pieces are packed in one carton
Pad Dia
30
(L/min)
(bar)
(mm)
(Kg)
QB-45602
6"(152)
10000
3.85(109)
90(6.3)
7-1/2"(193)
0.24
1.85(0.84)
3/8"
81.6
7.1
QB-46502
5"(127)
10000
3.85(109)
90(6.3)
6"(153)
0.24
1.74(0.79)
3/8"
80.1
7.1
QB-46602
6"(152)
10000
3.85(109)
90(6.3)
6-1/2"(166)
0.24
1.74(0.79)
3/8"
80.1
7.1
QB-47602
6"(152)
10000
3.85(109)
90(6.3)
7-1/2"(193)
0.24
2.49(1.13)
3/8"
84.7
7.1
Complete air tool solutions
QB-41
Air Random Orbital Sander / Central-Vacuum
Air Inlet: 1/4" + Rubber palm grip allows one hand operation.
+ Lightweight cast aluminum housing improves
durability and lifetime.
+ Special rubber shroud provides maximum vacuum
and no air leak.
+ Excellent for refinishing or smoothing the surface of
metal, wood, leather…etc.
+ 3/16" (5mm) orbit for fine finishes.
+ Hook (Velcro) pad with 6 hole.
10 pieces are packed in one carton
QB-42
Air Random Orbital Sander / Non-Vacuum
Air Inlet: 1/4" + Rubber palm grip allows one hand operation.
+ Lightweight cast aluminum housing improves
durability and lifetime.
+ Excellent for refinishing or smoothing the surface
of metal, wood, leather…etc.
+ 3/16" (5mm) orbit for fine finishes.
+ U.S.A. made urethane pad; sandpaper not included.
10 pieces are packed in one carton
QB-43
Air Random Orbital Sander
/ Self-Generated Vacuum
Air Inlet: 1/4" + Rubber palm grip allows one hand operation.
+ Special rubber shroud provides maximum vacuum
and no air leak.
+ Air hose and vacuum hose are both included.
+ 3/16" (5mm) orbit for fine finishes.
+ U.S.A. made urethane pad with 6 hole of hook (velcro) type.
+ Excellent for refinishing or smoothing the surface of metal,
wood, leather…etc.
6 pieces are packed in one carton
Pad Dia
(L/min)
(bar)
(mm)
(Kg)
QB-41902
6"(152)
10000
3.85(109)
90(6.3)
8"(206)
0.24
2.0(0.91)
3/8"
81.5
0.8
QB-42502
5"(127)
10000
3.85(109)
90(6.3)
6"(153)
0.24
1.78(0.81)
3/8"
75.7
0.6
QB-42602
6"(152)
10000
3.85(109)
90(6.3)
6-1/2"(166)
0.24
1.87(0.85)
3/8"
74.4
1.3
QB-43802
5"(127)
10000
3.85(109)
90(6.3)
8"(206)
0.24
3.28(1.49)
3/8"
83.9
1.3
QB-43902
6"(152)
10000
3.85(109)
90(6.3)
8-3/4"(221)
0.24
3.39(1.54)
3/8"
83.0
1.4
31
Complete air tool solutions
32
Air Shear
Complete air tool solutions
QG-102
Air Shear/Straight Type
Air Inlet: 1/4" + Available to cut sheet aluminum up to 1.5mm, sheet
steel 1.2mm and sheet stainless steel 1.0mm.
+ Heat treated shear blades for long lasting cutting performance.
10 pieces are packed in one carton
QG-202
Air Shear/Pistol Type
Air Inlet: 1/4" + Available to cut sheet aluminum up to 1.5mm,
1.2mm steel and 1.0mm sheet stainless steel.
+ Heat treated shear blades for long lasting cutting performance.
10 pieces are packed in one carton
QG-103
Air Nibbler
Air Inlet: 1/4" + The strengthened punch allows longer lifetime.
+ Rear exhaust reduces the noise level.
10 pieces are packed in one carton
Strokes
Per min.
S.P.M
(L/min)
(bar)
(mm)
(Kg)
S.P.M
QG-102
2600
6.0(170)
90(6.3)
10"(254)
2.2(1.0)
3/8"
85.8
2.4
QG-202
2600
6.5(184)
90(6.3)
8-1/4"(210)
2.43(1.1)
3/8"
89.1
2.9
QG-103
2600
3.0 (85)
90(6.3)
7-3/5"(193)
2.2(1.0)
3/8"
88
2.8
33
Complete air tool solutions
34
Air Saw
Complete air tool solutions
QD-221
Air Saw With Hose
Air Inlet: 1/4" + Quick change saw blade holder allows blade
changing easily.
+ 5 pieces file set and 2 saw blades are included.
+ Adjustable guard / guide controls depth of cut
precisely.
+ Excellent for cutting sheet aluminum, plastic and
sheet metal up to 1.6mm.
10 pieces are packed in one carton
QD-924
24T Saw Blade
+10 pcs / box
+Saw blade material: High-speed steel (HSS).
QD-932
32T Saw Blade
+10 pcs / box
+Saw blade material: High-speed steel (HSS).
Stroke
Length
mm
Strokes
Collef
Per min. Size
spm
mm
(L/min)
(bar)
(mm)
(Kg)
spm
QD-221
10
5000
4
4.0 (113)
90(6.3)
9-3/4"(250)
1.76(0.8)
3/8"
81.9
4.1
35
Complete air tool solutions
36
Air Drill
Complete air tool solutions
QE-331
3/8" Air Reversible Drill / With Keyless Chuck
Air Inlet: 1/4" + Available to retract drill bit reversely after
drilling through the hole.
+ Convenient forward / reverse switch allows fast
direction change.
+ Handle exhaust efficiently reduces noise and directs
air from working area.
10 pieces are packed in one carton
QE-332
3/8" Air Drill / With Keyless Chuck
Air Inlet: 1/4" + Single direction for operation.
+ Handle exhaust efficiently reduces noise and
directs air from working area.
10 pieces are packed in one carton
QE-333
3/8" Air Reversible Drill / With Key Chuck
Air Inlet: 1/4" +Same features as QE-331, but equipped with key chuck.
10 pieces are packed in one carton
QE-334
3/8" Air Drill / With Key Chuck
Air Inlet: 1/4" + Same features as QE-332, but equipped with key chuck.
10 pieces are packed in one carton
Chuck
size
mm
(L/min)
(bar)
(mm)
(Kg)
QE-331
10
1800
6.5(184)
90(6.3)
8"(203)
2.42(1.1)
3/8"
96.5
0.3
QE-332
10
2200
6.5(184)
90(6.3)
7-1/2"(190)
2.20(1.0)
3/8"
96.5
0.3
QE-333
10
1800
6.5(184)
90(6.3)
8"(203)
2.42(1.1)
3/8"
92
0.2
QE-334
10
2200
6.5(184)
90(6.3)
7-1/2"(190)
2.20(1.0)
3/8"
92
0.2
37
Complete air tool solutions
Air Drill
QE-341
1/2" Air Reversible Drill / With Keyless Chuck
Air Inlet: 1/4" + Available to retract drill bit reversely after drilling
through the hole.
+ Convenient forward/ reverse switch allows fast
direction change.
+ Handle exhaust efficiently reduces noise and
directs air from working area.
+ Side handle bar is included, which provides improved stability.
10 pieces are packed in one carton
QE-342
1/2" Air Drill / With Keyless Chuck
Air Inlet: 1/4" + Single direction of revolution.
+ Handle exhaust efficiently reduces noise and directs
air from working area.
+ Side handle bar is included, which provide better
stability.
10 pieces are packed in one carton
QE-343
1/2" Air Reversible Drill / With Key Chuck
Air Inlet: 1/4" + Same features as QE-341, but equipped with key chuck.
10 pieces are packed in one carton
QE-344
1/2" Air Drill / With Key Chuck
Air Inlet: 1/4" + Same features as QE-342, but equipped with key chuck.
10 pieces are packed in one carton
Chuck
size
mm
38
(L/min)
(bar)
QE-341
13
800
6.5(184)
90(6.3)
QE-342
13
800
6.5(184)
90(6.3)
QE-343
13
800
6.5(184)
90(6.3)
QE-344
13
800
6.5(184)
90(6.3)
(mm)
9"(230)
(Kg)
3.96(1.8)
3/8"
96.5
0.1
8-1/4"(209) 3.74(1.7)
3/8"
96.5
0.1
3.96(1.8)
3/8"
97.5
0.1
8-1/4"(209) 3.74(1.7)
3/8"
97.5
0.1
9"(230)
Complete air tool solutions
QE-431
3/8" Air Reversible Drill / With Keyless Chuck
Air Inlet: 1/4" + Low malfunction rate, long life span.
+ Easier and faster to change the drill bit with the quick chuck.
+ High drilling capacity well improves the efficiency.
+ “Forward” and “Reverse” can be switched less than a second.
+ Torque outputs stably and smothly, low vibration and noise rates.
10 pieces are packed in one carton
QE-432
3/8" Air Drill / With Keyless Chuck
Air Inlet: 1/4" + Low malfunction rate, long life span.
+ Easier and faster to change the drill bit with the quick chuck.
+ High drilling capacity well improves the efficiency.
+ Torque outputs stably and smothly, low vibration and noise rates.
10 pieces are packed in one carton
QE-433
3/8" Air Reversible Drill / With Key Chuck
Air Inlet: 1/4" + Low malfunction rate, long life span.
+ High drilling capacity well improves the efficiency.
+ “Forward” and “Reverse” can be switched less than a second.
+ Torque outputs stably and smothly, low vibration and noise rates.
10 pieces are packed in one carton
QE-434
3/8" Air Drill / With Key Chuck
Air Inlet: 1/4"
+ Low malfunction rate, long life span.
+ High drilling capacity well improves the efficiency.
+ Torque outputs stably and smothly, low vibration and noise rates.
10 pieces are packed in one carton
Chuck
size
mm
(L/min)
(bar)
(mm)
(Kg)
QE-431
10
1800
4.0(112)
90(6.3) 8-29/32"(226) 2.6(1.18)
3/8"
90.0
3.0
QE-432
10
2200
4.8(135)
90(6.3) 8-29/32"(226) 2.6(1.18)
3/8"
90.0
3.0
QE-433
10
1800
4.0(112)
90(6.3) 9-1/16"(230) 2.7(1.65)
3/8"
90.0
3.0
QE-434
10
2200
4.8(135)
90(6.3) 9-1/16"(230) 2.7(1.65)
3/8"
90.0
3.0
39
Complete air tool solutions
Air Drill
QE-441
1/2" Air Reversible Drill / With Keyless Chuck
Air Inlet: 1/4"
+ Low malfunction rate, long life span.
+ Easier and faster to change the drill bit with the quick chuck.
+ High drilling capacity well improves the efficiency.
+ “Forward” and “Reverse” can be switched less than a second.
+ Torque outputs stably and smothly, low vibration and noise rates.
10 pieces are packed in one carton
QE-442
1/2" Air Drill / With Keyless Chuck
Air Inlet: 1/4"
+ Low malfunction rate, long life span.
+ Easier and faster to change the drill bit with the quick chuck.
+ High drilling capacity well improves the efficiency.
+ Torque outputs stably and smothly, low vibration and noise rates.
10 pieces are packed in one carton
QE-443
1/2" Air Reversible Drill / With Key Chuck
Air Inlet: 1/4"
+ Low malfunction rate, long life span.
+ High drilling capacity well improves the efficiency.
+ “Forward” and “Reverse” can be switched less than a second.
+ Torque outputs stably and smothly, low vibration and noise rates.
10 pieces are packed in one carton
QE-444
1/2" Air Drill / With Key Chuck
Air Inlet: 1/4"
+ Low malfunction rate, long life span.
+ High drilling capacity well improves the efficiency.
+ Torque outputs stably and smothly, low vibration and noise rates.
10 pieces are packed in one carton
Chuck
size
mm
40
(L/min)
(bar)
(mm)
(Kg)
QE-441
13
1100
4.0(112)
90(6.3) 10-53/64"(270) 3.5(1.58)
3/8"
90.0
3.0
QE-442
13
1300
4.8(135)
90(6.3) 10-53/64"(270) 3.5(1.58)
3/8"
90.0
3.0
QE-443
13
1100
4.0(112)
90(6.3) 10-53/64"(270) 3.8(1.73)
3/8"
90.0
3.0
QE-444
13
1300
4.8(135)
90(6.3) 10-53/64"(270) 3.8(1.73)
3/8"
90.0
3.0
Complete air tool solutions
QE-532
3/8" Air Drill / With Keyless Chuck
Air Inlet: 1/4" + Low malfunction rate, extremely long life span.
+ Easier and faster to change the drill bit with the
“quick-to-change” chuck.
+ High drilling capacity well improves the efficiency.
+ Dual bearing design efficiently increases the life span
and concentricity.
+ Equipped with top quality chuck, which is widely used on various machine tools.
10 pieces are packed in one carton
QE-533
3/8" Air Reversible Drill / With Key Chuck
Air Inlet: 1/4" + Low malfunction rate, extremely long life span.
+ “Forward” and “Reverse” can be switched less than a second.
+ High drilling capacity well improves the efficiency.
+ Dual bearing design efficiently increases the life span
and concentricity.
+ Equipped with top quality chuck, which is widely used
on various machine tools.
10 pieces are packed in one carton
QE-542
1/2" Air Drill / With Keyless Chuck
Air Inlet: 1/4" + Low malfunction rate, extremely long life span.
+ Easier and faster to change the drill bit with the
“quick-to-change” chuck.
+ High drilling capacity well improves the efficiency.
+ Dual bearing design efficiently increases the life span
and concentricity.
+ Equipped with top quality chuck, which is widely used on various machine tools.
10 pieces are packed in one carton
QE-543
1/2" Air Reversible Drill / With Key Chuck
Air Inlet: 1/4" + Low malfunction rate, extremely long life span.
+ “Forward” and “Reverse” can be switched less than a second.
+ High drilling capacity well improves the efficiency.
+ Dual bearing design efficiently increases the life span
and concentricity.
+ Equipped with top quality chuck, which is widely used
on various machine tools.
10 pieces are packed in one carton
Chuck
size
mm
(L/min)
(bar)
(mm)
(Kg)
QE-532
10
2800
4.8(135)
90(6.3) 9-9/16"(243) 2.7(1.25)
3/8"
90.0
3.0
QE-533
10
2200
4.0(112)
90(6.3) 9-13/32"(189) 2.7(1.25)
3/8"
90.0
3.0
QE-542
13
1300
4.8(135)
90(6.3) 11-1/64"(280) 3.8(1.75)
3/8"
90.0
3.0
QE-543
13
1100
4.0(112)
90(6.3) 10-55/64"(276) 3.8(1.75)
3/8"
90.0
3.0
41
Complete air tool solutions
42
Air Screwdriver
Complete air tool solutions
RA-101
Air Screwdriver
Air Inlet: 1/4" + Screw capacity: M4
+ Equipped with Double Hammer impact mechanism.
20 pieces are packed in one carton
RA-102
Air Screwdriver
Air Inlet: 1/4" + Screw capacity: M5
+ Equipped with Double Hammer impact mechanism.
+ High precision motor generates higher torque and
improves efficiency.
20 pieces are packed in one carton
RA-105
Air Screwdriver
Air Inlet: 1/4" + Screw capacity: M6
+ Equipped with Double Hammer impact mechanism.
+ Easy & convenient forward / reverse switch.
+ High precision motor generates higher torque and
improves efficiency.
20 pieces are packed in one carton
Chuck Size
(Hex)
inch(mm)
(Nm)
(L/min)
(bar)
(mm)
(Kg)
RA-101
1/4"(6.35)
3.7-8.9(5-12)
9000
6.0(170)
90(6.3)
6-1/2"(166)
1.32(0.6)
3/8"
85.7
2.2
RA-102
1/4"(6.35)
3.7-10.3(5-14)
9000
6.0(170)
90(6.3)
6-3/4"(172)
1.54(0.7)
3/8"
86.7
3.7
RA-105
1/4"(6.35)
3.7-16.2(5-22)
8500
8.5(241)
90(6.3)
8-1/4"(208)
2.2(1.0)
3/8"
96.7
4.9
43
Complete air tool solutions
Air Screwdriver
RA-201
Air Screwdriver
Air Inlet: 1/4" + Screw capacity: M6
+ Equipped with Double Hammer impact mechanism.
+ Easy & convenient forward / reverse switch.
+ High precision motor generates higher torque and
improves efficiency.
10 pieces are packed in one carton
RA-301
Air Screwdriver Adjustable Clutch
Air Inlet: 1/4" + Screw capacity: M4
+ Safety push-to-start clutch.
+ Equipped with internal torque adjusting device.
+ Built-in quick release bit chuck.
10 pieces are packed in one carton
RA-302
Air Screwdriver Adjustable Clutch
Air Inlet: 1/4" + Screw capacity: M6
+ Safety push-to-start clutch.
+ Equipped with internal torque adjusting device.
+ Built-in quick release bit chuck.
10 pieces are packed in one carton
Chuck Size
(Hex)
inch(mm)
44
(L/min)
(Nm)
(bar)
(mm)
(Kg)
RA-201
1/4"(6.35)
3.7-18.5(5-25)
10000
9.0(255)
90(6.3)
7"(180)
2.65(1.2)
3/8"
93.0
5.3
RA-301
1/4"(6.35)
3.8-10(5-13.5)
1800
6.0(170)
90(6.3)
7-1/2"(190)
2.43(1.1)
3/8"
95.3
4.2
RA-302
1/4"(6.35)
3.8-12(5-16.3)
800
6.0(170)
90(6.3)
9"(226)
2.87(1.3)
3/8"
96.5
2.2
Complete air tool solutions
Complete air tool solutions
Shut-offScrewdriver
Shut-off- Screwdriver
Air Inlet: 1/4" + Proved by the life-time tester, these items can be operated
continuously up to 1.5 million times.
+ Industrial grade, excellent for long continous operation on various
mass production lines.
+ Precise machined components, unique internal mechanism design.
+ Low noise and vibration rate, high adjustable accuracy up to + - 5%.
+ Pressing to start level, ergonomic design, compact volume, light
weight, easy and comfortable to operate.
20 pieces are packed in one carton
RA-3011
RA-3017
RA-4008
RA-4015
RA-3023
RA-5005
RA-5008
RA-4021
RA-5017
Chuck Size
(Hex)
inch(mm)
IN-LB (Nm)
(L/min)
(bar)
(mm)
(Kg)
RA-3011
1/4"(6.35)
9.7-18.5(1.1-2.1)
1100
7.0(198)
90(6.3)
7-3/8"(187)
0.94(0.42)
1/4"
70
2
RA-3017
1/4"(6.35) 6.2 - 13.2(0.7-1.5)
1700
7.0(198)
90(6.3)
7-3/8"(187)
0.94(0.42)
1/4"
70
2
RA-3023
1/4"(6.35) 3.5 - 8.8(0.4-1.0)
2300
7.0(198)
90(6.3)
7-3/8"(187)
0.94(0.42)
1/4"
70
2
RA-4008
1/4"(6.35) 14.1-35.4(1.6-4.0)
800
10.5(297)
90(6.3)
8-1/4"(209)
1.43(0.65)
1/4"
74
2.5
RA-4015
1/4"(6.35) 8.8 - 19.4(1.0-2.2) 1500
10.5(297)
90(6.3)
8-1/4"(209)
1.43(0.65)
1/4"
74
2.5
RA-4021
1/4"(6.35) 8.8 - 13.2(1.0-1.7)
10.5(297)
90(6.3)
8-1/4"(209)
1.43(0.65)
1/4"
74
2.5
RA-5005
1/4"(6.35) 44.2-92.9(5.0-10.5) 480
17.5(495)
90(6.3)
9-1/2"(240)
2.2(1.0)
3/8"
75
10
RA-5008
1/4"(6.35) 26.5 - 48.6(3.0-5.5) 800
17.5(495)
90(6.3)
9-1/2"(240)
2.2(1.0)
3/8"
75
10
RA-5017
1/4"(6.35) 13.2-23.0(1.5-2.6)
17.5(495)
90(6.3)
9-1/2"(240)
2.2(1.0)
3/8"
75
10
2100
1700
45
45
Complete air tool solutions
46
Air Hammer
Complete air tool solutions
47
Complete air tool solutions
Air Hammer
SC-211C /
221C
Air Hammer Round Shank / Air Hammer Hex Shank
Air Inlet: 1/4" + Alloyed steel cylinder & piston improves the
lifetime.
+ Standard accessories: Whole set of SC-415,SC-425
SC-4 chisel kit is provided along with the tool.
8 pieces are packed in one carton
SC-212C /
222C
Air Hammer Round Shank / Air Hammer Hex Shank
Air Inlet: 1/4" + Same feature as SC-211 or SC-221, but equipped
with longer cylinder.
+ Standard accessories: Whole set of SC-415,SC-425
SC-4 chisel kit is provided along with the tool.
8 pieces are packed in one carton
SC-4 Chisel Set
+ Flat Chisel
+ Cutting Chisel
+ Tapered Punch
+ Ripping Chisel
+ Tail Pipe Cutter
SC-415 - Chisel Set / 175mmL / Round
SC-425 - Chisel Set / 175mmL / Hex
(L/min)
48
(bar)
(mm)
(Kg)
SC-211C
0.401(10.2)
3200
4.0(113)
90(6.3)
6-7/8"(175)
3.74(1.7)
3/8"
98.0
12.3
SC-221C
0.393(10)
3200
4.0(113)
90(6.3)
6-7/8"(175)
3.74(1.7)
3/8"
98.0
12.3
SC-212C
0.401(10.2)
2200
4.0(113)
90(6.3)
8-7/8"(225)
4.40(2.0)
3/8"
94.7
13.2
SC-222C
0.393(10)
2200
4.0(113)
90(6.3)
8-7/8"(225)
4.40(2.0)
3/8"
94.7
13.2
Complete air tool solutions
SC-07C
Air Hammer-Set 7pcs
Air Inlet: 1/4" + 1pc- Air Hammer (Various Selections)
+ 5pcs-Chisel Kits
+ 1pc- Spring Retainer
5 pieces are packed in one carton
Item No.
Shank
Contents
SC-0517C
Round Shank
SC-211C (SC-415)
SC-0527C
Round Shank
SC-212C (SC-415)
SC-0617C
Hex Shank
SC-221C (SC-425)
SC-0627C
Hex Shank
SC-222C (SC-425)
SN-1268
SN-1268 / SN-1288
Needle Scaler
Air Inlet: 1/4" + Wide and complete air tool range
+ 1 piece more attached chisel allows wider usage.
+ The scaling rods,made of special spring steel,
well improves the life span of itself.
SN-1288
6 pieces are packed in one carton / 10 pieces are packed in one carton
SC-2B
SC-2A
Quick Change Retainer
Retainer
Stroke
Length
(L/min)
(bar)
SN-1268
28
4600
15(424)
90(6.3)
18-1/8"
6.16
3/8"
91.0
13.7
SN-1288
32
5500
3(84.96)
90(6.3)
11-3/8"
2.86
3/8"
86.0
7.67
49
Complete air tool solutions
50
Air
Hydraulic Riveter
RIVET
RIVET
MANDREL
PA-111
aluminum
aluminum
steel
stainless
stainless
aluminum
steel
steel
steel
stainless
aluminum
aluminum
steel
stainless
stainless
aluminum
steel
steel
steel
stainless
aluminum
aluminum
steel
stainless
stainless
aluminum
steel
steel
steel
stainless
aluminum
aluminum
steel
stainless
stainless
aluminum
steel
steel
steel
stainless
aluminum
aluminum
steel
stainless
stainless
aluminum
steel
steel
steel
stainless
aluminum
aluminum
steel
stainless
stainless
aluminum
steel
steel
steel
stainless
PA-301MV
aluminum
aluminum
steel
stainless
stainless
aluminum
steel
steel
steel
stainless
PA-321
aluminum
aluminum
steel
stainless
stainless
aluminum
steel
steel
steel
stainless
PA-202
aluminum
aluminum
steel
stainless
stainless
aluminum
steel
steel
steel
stainless
PA-201
PA-201V
PA-211
PA-301
PA-301V
(2.5)
2.4
RIVET DIAMETER( ØMM)
(3.0)
3.2
4.0
(5.0)
4.8
6.4
7.2
8.0
Complete air tool solutions
MATERIAL
51
Complete air tool solutions
Air
Hydraulic Riveter
MATERIAL
RIVET
RIVET
MANDREL
PA-312
aluminum
aluminum
steel
stainless
stainless
aluminum
steel
steel
steel
stainless
aluminum
aluminum
steel
stainless
stainless
aluminum
steel
steel
steel
stainless
aluminum
aluminum
steel
stainless
stainless
aluminum
steel
steel
steel
stainless
PA-401V
PA-401MV
(2.5)
2.4
RIVET DIAMETER( ØMM)
(3.0)
3.2
4.0
(5.0)
4.8
PA-111
Air Hydraulic Riveter
Air Inlet: 1/4" + Superior durability, excellent for mass production line of all kinds.
+ The unique stroke reaches up to 26mm, which design allows
working with 8.0mm iron-iron rivet.
+ 4.0, 4.8, 6.0, 6.4 and 8.0 mm rivet noses are included.
6 pieces are packed in one carton
(bar)
PA-111
52
4100(1860)
26
4.8-8.0
90(6.3)
L/cycle
2.88
(Kg)
6.6(3.0)
3/8"
82.0
0.8
6.4
7.2
8.0
Complete air tool solutions
PA-201
Air Hydraulic Riveter
Air Inlet: 1/4" + Durable alloy steel chuck jaws are now equipped to
improve performance and lifetime.
+ Mirror finished cylinder and piston brings less
friction and allows the rivets to be released quickly.
+ Performs well in all operating directions or hard-to-reach area.
+ A powerful, durable, high-speed tool for assembly line and intensive use.
+ It is necessary to refer to the specification table of riveters
prior to purchase.
+ Comes with 2.4, 3.2, 4.0, 4.8, 6.0, 6.4mm nosepieces.
6 pieces are packed in one carton
PA-201V
Air Hydraulic Riveter
Air Inlet: 1/4" + Superior durability, excellent for mass production line of all kinds.
+ Strengthened clamping jaws were made of high quality alloy steel,
which well improved the lifetime.
+ 2.4, 3.2, 4.0, 4.8, 6.0 and 6.4 mm rivet noses are included.
+ The auto mandrel retracting design simultaneously improves the
working efficiency and reduces the malfunction rate.
6 pieces are packed in one carton
PA-211
Air Hydraulic Riveter
Air Inlet: 1/4"
+ Superior durability, excellent for mass production line of
all kinds.
+ Strengthened clamping jaws were made of high quality
alloy steel, which well improved the lifetime.
+ The maximum working capacity of this riveter is high up
to 6.4mm stainless steel rivet.
+ 2.4, 3.2, 4.0, 4.8, 6.0 and 6.4 mm rivet noses are included.
6 pieces are packed in one carton
(bar)
L/cycle
(Kg)
PA-201
3534(1603)
14
2.4-6.4
90(6.3)
2.32
3.9(1.8)
3/8"
79.7
0.5
PA-201V
3534(1603)
14
2.4-6.4
90(6.3)
2.32
3.93(1.785)
3/8"
79.7
0.5
PA-211
3748(1700)
18
2.4-6.4
90(6.3)
2.9
3.85(1.75)
3/8"
79.7
0.8
53
Complete air tool solutions
Air
Hydraulic Riveter
PA-321
Air Hydraulic Riveter
Air Inlet: 1/4" + Superior durability, excellent for mass production line of
all kinds.
+ Strengthened clamping jaws were made of high quality
alloy steel, which well improved the lifetime.
+ The unique stroke reaches up to 22mm, which design
allows working with 4.8 mm stainless rivet possibly.
+ 2.4, 3.2, 4.0 and 4.8 mm rivet noses are included.
6 pieces are packed in one carton
PA-202/ 312
202
Air Hydraulic Riveter
Air Inlet: 1/4" + Aluminum alloy forged plunger housing for greater strength and
durability.
+ Adjustable rivet clamping is designed for obtaining
the most effective stroke and riveting speed.
+ Durable alloy steel chuck jaws are equipped to
improve performance and lifetime.
+ Universal air inlet efficiently prevents air hose winding around.
+ It is necessary to refer to the specification table of riveters
prior to purchase.
+Come with 3.2, 4.0, 4.8, 6.4mm nosepieces forPA-202.
+Come with 2.4, 3.2, 4.0, 4.8mm nosepieces for PA-312.
312
6 pieces are packed in one carton
(bar)
54
L/cycle
PA-321
2612(1185)
22
2.4-4.8
90(6.3)
1.48
PA-202
2460(1200)
14
3.2-6.4
90(6.3)
PA-312
1983(900)
18
2.4-4.8
90(6.3)
(Kg)
3.3(1.5)
3/8"
79.7
0.4
1.8
4.2(1.91)
3/8"
79.7
0.3
1.8
3.83(1.74)
3/8"
75.3
0.4
Complete air tool solutions
PA-301
Air Hydraulic Riveter
Air Inlet: 1/4" + Durable alloy steel chuck jaws are now equipped to
improve performance and lifetime.
+ Quick release air valve allows cylinder to return quickly
and protects the tool against overload.
+ Excellent for high-speed assembling requirements.
+ Comes with 2.4, 3.2, 4.0, 4.8mm nosepieces.
+ It is necessary to refer to the specification table of
riveters prior to purchase.
10 pieces are packed in one carton
PA-301V
Air Hydraulic Riveter
Air Inlet: 1/4" + Superior durability, excellent for mass production line of
all kinds.
+ Strengthened clamping jaws were made of high quality
alloy steel, which well improved the lifetime.
+ 2.4, 3.2, 4.0 and 4.8 mm rivet noses are included.
+ The auto mandrel retracting design simultaneously
i m p rove s t h e wo r k i n g e f f i c i e n c y a n d re d u c e s t h e
malfunction rate.
6 pieces are packed in one carton
PA-301MV
Air Hydraulic Riveter
Air Inlet: 1/4" + Superior durability, excellent for mass production line of
all kinds.
+ Strengthened clamping jaws were made of high quality
alloy steel, which well improved the lifetime.
+ The auto mandrel retracting mechanism, hidden inside
the housing, efficiently reduces the malfunction rate.
+ The ergonomic shape increases operation comfort.
+ 2.4, 3.2, 4.0 and 4.8 mm rivet noses are included.
+ The auto mandrel retracting design simultaneously
improves the working efficiency and reduces the
malfunction rate.
10 pieces are packed in one carton
(bar)
L/cycle
(Kg)
PA-301
2303(1045)
16
2.4-4.8
90(6.3)
1.48
3.3(1.5)
3/8"
79.7
0.3
PA-301V
2303(1045)
16
2.4-4.8
90(6.3)
1.48
3.3(1.5)
3/8"
79.7
0.3
PA-301MV
2303(1045)
16
2.4-4.8
90(6.3)
1.48
3.3(1.5)
3/8"
79.7
0.3
55
Complete air tool solutions
Air
Hydraulic Riveter
PA-401V
Air Hydraulic Riveter(Heavy Duty)
Air Inlet: 1/4"
+ Superior durability, excellent for mass production line of all kinds.
+ This riveter is especially designed to work with 4mm aluminumiron rivet.
+ 2.4, 3.2, and 4.0 mm rivet noses are included.
+ The auto mandrel retracting design simultaneously improves the
working efficiency and reduces the malfunction rate.
6 pieces are packed in one carton
PA-401MV
Air Hydraulic Riveter(Heavy Duty)
Air Inlet: 1/4"
+ Superior durability, excellent for mass production line of all kinds.
+ The auto mandrel retracting mechanism, hidden inside the
housing, efficiently reduces the malfunction rate.
+ This riveter is especially designed to work with 4.0mm aluminumiron rivet.
+ The ergonomic shape increases operation comfort.
+ 2.4, 3.2 and 4.0 mm rivet noses are included.
+ The auto mandrel retracting design simultaneously improves the
working efficiency and reduces the malfunction rate.
10 pieces are packed in one carton
(bar)
56
L/cycle
(Kg)
PA-401V
1532(695)
16
2.4-4.0
90(6.3)
0.67
2.57(1.25)
3/8"
79.7
0.3
PA-401MV
1532(695)
16
2.4-4.0
90(6.3)
0.67
2.57(1.25)
3/8"
79.7
0.3
Complete air tool solutions
PA-531
Air Hydraulic Riveter(Heavy Duty)
Air Inlet: 1/4"
+ Super riveting force allows the lockbolt being riveted more
firmly and accurately.
+ Only available to work with 3/16” lockbolt.
+ Suitable for wherever vibration proof is seriously considered such
as soundproof wall engineering, ventilation window engineering
for container, bridge construction engineering…etc.
6 pieces are packed in one carton
PA-541
Air Hydraulic Riveter(Heavy Duty)
Air Inlet: 1/4"
+ Only available to work with 1/4” lockbolt.
+ Super riveting force allows the lockbolt being riveted more
firmly and accurately.
+ Suitable for wherever vibration proof is seriously considered such
as soundproof wall engineering, ventilation window engineering
for container, bridge construction engineering…etc.
6 pieces are packed in one carton
PB-2402
Air Hydraulic Nut Setter(Heavy Duty)
Air Inlet: 1/4"
+ Low malfunction rate.
+ Easy to maintenance.
+ Superior durability, excellent for mass production line of all kinds.
6 pieces are packed in one carton
(bar)
L/cycle
(Kg)
PA-531
4100(1860)
23
3/16"
90(6.3)
2.88
6.6(3.0)
3/8"
82
0.8
PA-541
4100(1860)
23
1/4"
90(6.3)
2.88
6.6(3.0)
3/8"
82
0.8
PA-2402
3638(1650)
9
1.5
3.41(1.55)
3/8"
82
0.8
steel M4~M10
90(6.3)
stainless M4~M8
57
Complete air tool solutions
58
Air Grease Gun
Complete air tool solutions
SG-400
Air Grease Gun
+ Prolong the life time and improve the performance.
of your tools.
+ Inhibit corrosion of parts during downtime.
+ Save your maintenance cost.
10 pieces are packed in one carton
SG-400C
Air Grease Gun
+ Prolong the life time and improve the performance.
of your tools.
+ Inhibit corrosion of parts during downtime.
+ Save your maintenance cost.
+ Ergonomic handle made by composite material
10 pieces are packed in one carton
SG-401
Air Grease Gun/Continuous Type
+ Heavy duty cast aluminum body for maximum
durability
+ Working pressure : 40-90 psi
+ Output volume : 288ml/min
10 pieces are packed in one carton
SG-101
Lubrication Kit
+ Prolong the life of your tools.
+ Improve the performance.
+ Inhibit corrosion of parts during downtime.
+ Save your maintenance cost.
50 pieces are packed in one carton
Air
Inlet
Working
Pressure
Proof
Pressure
Capacity
kgf/cm²
kgf/cm²
c.c.
(Kg)
SG-400
1/4"
2.8-8.4
10.5
400
3/8''
3.2(1.46)
80.2
0.7
SG-400C
1/4"
2.8-8.4
10.5
400
3/8''
2.2(1.0)
81.4
0.6
SG-401
1/4"
2.8-8.4
10.5
400
3/8''
3.52(1.6)
74.0
2.0
59
Complete air tool solutions
Auto Repair Tool
Qk-111-P51
Qk-111-P52
Qk-111-P53
Qk-111-P54
Qk-111-P50
(L/min)
QK-111
60
20000
6.0(170)
(mm)
7-5/64" (180)
(bar)
2.43(1.1)
10
75
3.9
Complete air tool solutions
QK-111
Air Windshield Remover
Air Inlet: 1/4" + The rear exhaust and extended muffler tube reduce
the noise and air pollution efficiently.
+ Lower vibration minimizes the user’s fatigue and
enables longer operating.
+ Lower wear rate of the components prolong the
durability of the tool.
+ Blade can be mounted in 12 different ways
according to user’s convenience.
15 pieces are packed in one carton
SK-1010
Air Caulking Gun
+ Outstanding surface treatment.
+ Ergonomic design for comfortable operation.
10 pieces are packed in one carton
QB-802
Air surface-cleaning tool
+ Patented removing wheel brings larger wear-off
volume.
+ More durable, easy to operate, no heating up during
operation.
+ Can be used to remove rust, oxides, decals, stickers,
vinyl, trim lines…without damaging the paint surface.
10 pieces are packed in one carton
Air Pressure
(L/min)
SK-1010
4.0 (113)
(bar)
50~70(3.4~4.8)
(L/min)
QB-802
3600
10.6(300)
Overall
Length
(mm)
(bar)
12''(305)
2.42(1.1)
(bar)
90(6.3)
(mm)
3/8''(10)
(mm)
7-7/8''(200)
(Kg)
0.7
2.6(1.2)
3/8''
86
0.3
61
Complete air tool solutions
Air Blow Gun
JC-304
Air Blow Gun
Air Inlet: 1/4" + Steel nozzle provides long life on the tool.
+ Used for cleaning.
+ Special Hi-tech material provide durable, quiet and comfortable operation preventing user fatigue.
60 pieces are packed in one carton
JC-310
Air Blow Gun
Air Inlet: 1/4" + Same feature as JC-304, with10" extended nozzle.
50 pieces are packed in one carton
JC-313
Air Blow Gun
Air Inlet: 1/4" + Same feature as JC-304, with 13" extended nozzle.
50 pieces are packed in one carton
JC-320
Air Blow Gun
Air Inlet: 1/4" + Same feature as JC-304, with 20" extended nozzle.
50 pieces are packed in one carton
(bar)
62
(Kg)
JC-304
4"
75-120(5.3-8.5)
150(10.6)
13.0(368)
15.0(425)
90(6.3)
0.15(0.07)
3/8"
90.0
JC-310
10"
75-120(5.3-8.5)
150(10.6)
13.0(368)
15.0(425)
90(6.3)
0.22(0.10)
3/8"
90.0
JC-313
13"
75-120(5.3-8.5)
150(10.6)
13.0(368)
15.0(425)
90(6.3)
0.24(0.11)
3/8"
90.0
JC-320
20"
75-120(5.3-8.5)
150(10.6)
13.0(368)
15.0(425)
90(6.3)
0.31(0.14)
3/8"
90.0
Complete air tool solutions
JC-340
Air Blow Gun
Air Inlet: 1/4" + Steel feature as JS-304 , with 40" extended nozzle
60 pieces are packed in one carton
JC-440
Air Blow Gun
Air Inlet: 1/4" + Triple air volume output.
+ Lightweight aluminum venturi effect nozzle.
+ Double air inlets design.
+ 1000mm extended air tube.
30 pieces are packed in one carton
(bar)
(Kg)
JC-340
40"
75-120(5.3-8.5)
150(10.6)
13.0(368)
15.0(425)
90(6.3)
0.50(0.23)
3/8"
90.0
JC-440
40"
75-120(5.3-8.5)
150(10.6)
13.0(368)
15.0(425)
90(6.3)
0.92(0.42)
3/8"
90.0
63
Complete air tool solutions
Filter, Regulator,
Lubricator
Sw-12 - 1/4" / Sw-13 - 3/8"
Mini Lubricator
+ Install in the air hose to provide automatic lubrication.
+ 8c.c. Lubricating oil capacity.
57mm
33.5mm
64
57mm
33.5mm
Complete air tool solutions
SV-2230 / SV-2330
Filter-Regulator-Lubricator
+ Removes all dirt particles larger than five microns.
+ 50c.c. Lubricating oil bowl capacity.
+ Can be filled under pressure.
20 pieces are packed in one carton
SV-2431
Filter-Regulator-Lubricator
+ Removes all dirt particles larger than five microns.
+ 50c.c. Lubricating oil bowl capacity.
+ Can be filled under pressure.
20 pieces are packed in one carton
SV-2230
1/4"
0-9.9(0-0.99)
15(1.5)
0.5-8.5(0.05-0.85)
5~60˚
50
1.59(0.70)
SV-2330
3/8"
0-9.9(0-0.99)
15(1.5)
0.5-8.5(0.05-0.85)
5~60˚
60
1.59(0.70)
SV-2431
1/2"
0-15 (0-1.5)
20(2.0)
1.0-15(0.1-1.5)
-5~60˚
80
3.3(1.50)
65
Complete air tool solutions
Air Hose Reel
SA-215 / 315
Air-Hose Reel
+ Mounting bracket can be mounted on the wall or
ceiling.
+ 24 braids covered PU tube brings the anti-explosion
capability up to 350 psi.
+ Auto retractable hose is replaceable and convenient
to be stored.
+The durable rewinding spring results in smooth operation.
2 pieces are packed in one carton
NOTE:
1.Type A:Multi-Copular allows Nitto Asia style plug.
2.Type B:Multi-Copular all in one, allows for Milton/ Tru-Flate/
Aro and Orion series European style plug.
3.Type C:Multi-Copular allows U.S.A style plug.
4.Type D:Multi-Copular allows France style plug.
bar
SA-215
8.0
12.0
15
7
20
1/4"
―
5.3
SA-315
10.0
15.0
15
7
20
3/8"
―
8
SD-23
Polyurethane Recoil Air-Hose
+ Returns automatically to the original position and
keeps it out of operator's way during operation.
+ Spring guards protects both ends of the hose. Both
ends have male 360˚ swivel fittings.
+ Temperature resistance from -20˚ C ~ +70˚ C.
66
bar
bar
SD-23110
8.0
12.0
10
7
20
1/4"
SD-23115
8.0
12.0
15
7
20
1/4"
SD-23210
5.0
8.0
10
7
20
1/4"
SD-23215
5.0
8.0
15
7
20
1/4"
SD-23315
10
15
15
7
20
3/8"
SD-24415
13
18
15
7
20
1/2"
SY-F
Air Adaptor/Quick Couplings
Air Adaptor
Item No.
SY-211M
SY-211F
SY-221M
SY-321M
SY-221F
SY-321F
Thread
Type
Male
Female
Thread
Size
Type
1/4" PT
Europe
Male
1/4" PT
3/8" PT
Female
1/4" PT
3/8" PT
SY-231M
Male
SY-231F
Female
Picture
Complete air tool solutions
SY-M
Japan
1/4" NPT
U.S.A
Thread
Size
Type
1/4" PT
Europe
Air Coupler
Item No.
SY-210M
SY-210F
SY-220M
SY-320M
SY-220F
SY-320F
Thread
Type
Male
Female
Male
1/4" PT
3/8" PT
Female
1/4" PT
3/8" PT
SY-230M
Male
SY-230F
Female
1/4" NPT
Picture
Japan
U.S.A
MA-4030
Deep Impact Socket Set 3 PCS 1/2" DR.
+ Contents : 17mm, 19mm, 21mm
+ By identifying the different color coated, the operator can
easily pick up the size needed.
+ With the external sheath, the working odject can be well
protected from being rubbed, scratched,impacted…etc.
+ With the 85mm extra long socket, to loosen or tighten
bolt or nut in deeper hole become easier and convenient.
24 pieces are packed in one carton
67
Complete air tool solutions
68
NEW PRODUCTS
Complete air tool solutions
NC-3410
3/8" Drive Air Impact Wrench Rocking Dog Type
Air Inlet: 1/4"
+ 8 positive power settings.
+ Easy manoeuvring with 360° air inlet swivel.
20 pieces are packed in one carton
(mm)
3/8"
(Nm)
3/8"(10)
5-50(7-68)
(Nm)
75(102)
(L/min)
10000
2.5(71)
PSI(bar)
(mm)
(Kg)
90 (6.3)
6-1/4" (159)
1.75(0.8)
3/8"
92.1
3.6
1/2"
102
9.3
3/8"
93.0
2.8
NC-8216
1" Drive Air Impact Wrench Twin Hammer Type
Air Inlet: 1/2'' + Twin Hammer Type and a hitting structure with long life
cycle.
+ Weight: 8.01KG (Light weight type)
1 pieces are packed in one carton
(mm)
1"
(Nm)
(Nm)
1-7/16"(36) 200-1600(271-2170) 1800(2441)
(L/min)
5000
9.0(254)
PSI(bar)
90 (6.3)
(mm)
19-3/16" (487)
(Kg)
18.48(8.4)
NC-4610N
1/2" Drive Air Impact Wrench Jumbo Hammer Type
Air Inlet: 1/4"
+ Stubby impact sockets, 6 points:5pcs 13, 17,19, 22, 24, mm
+ 1/4" plug:1pc
+ Equipped with Jumbo Hammer Impact mechanism.
+ As long as 115.5mm only, which is the shortest model
among all 1/2” impact wrenches available in the market.
10 pieces are packed in one carton
(mm)
1/2"
5/8"(16)
(Nm)
(Nm)
200-350(271-475) 450(610)
(L/min)
9000
4.4(124)
PSI(bar)
90 (6.3)
(mm)
(Kg)
4-9/16" (115.5) 3.52(1.6)
SH-1001/ SH-1002
Air Tool Holder
+ Made up of powerful magnet, allows to load up to
12 & 13 kgs.
+ The gap design on the central ring helps not to
decrease the life span of the trgger spring of the
impact wrench.
10 pieces are packed in one carton
Maximum Load Overall Length
SH-1001
SH-1002
LB(Kg)
Inch(mm)
26.4(12.0)
28.6(13.0)
16''(400)
20''(500)
69
Complete air tool solutions
NEW PRODUCTS
QB-54
Air Random Orbital Sander / Central-Vacuum
Air Inlet: 1/4"
+ Cover with Roter inside makes a longer cycle life.
+ The rubber palm grip allows users to operate with
one hand easily.
10 pieces are packed in one carton
Pad Dia
(L/min)
(bar)
(mm)
QB-54502
5"(127)
10000
3.0(85)
90(6.3)
7-3/4"(197)
0.24
1.65(0.75)
3/8"
81.6
7.1
QB-54602
6"(152)
10000
3.0(85)
90(6.3)
8-1/4"(210)
0.24
1.70(0.78)
3/8"
81.6
7.1
(Kg)
QB-55
Air Random Orbital Sander / Non-Vacuum
Air Inlet: 1/4"
+ Cover with Roter inside makes a longer cycle life.
+ The rubber palm grip allows users to operate with
one hand easily.
10 pieces are packed in one carton
Pad Dia
(L/min)
(bar)
(mm)
(Kg)
QB-55502
5"(127)
10000
3.0(85)
90(6.3)
6-5/32"(157)
0.24
1.43(0.65)
3/8"
81.6
7.1
QB-55602
6"(152)
10000
3.0(85)
90(6.3)
6-11/16"(170)
0.24
1.50(0.68)
3/8"
81.6
7.1
QB-56
Air Random Orbital Sander / Self-Generated Vacuum
Air Inlet: 1/4"
+ Cover with Roter inside makes a longer cycle life.
+ The rubber palm grip allows users to operate with
one hand easily.
10 pieces are packed in one carton
Pad Dia
(L/min)
70
(bar)
(mm)
QB-56502
5"(127)
10000
3.0(85)
90(6.3)
7-3/4"(197)
0.24
1.65(0.75)
3/8"
81.6
7.1
QB-56602
6"(152)
10000
3.0(85)
90(6.3)
8-1/4"(210)
0.24
1.70(0.78)
3/8"
81.6
7.1
(Kg)
Complete air tool solutions
QP-113
Air Pistol Sander
Air Inlet: 1/4" + Ergonomic cushion-grip handle.
+ Good in low noise than traditional one (74db)
+ Speed can be adjusted.
+ 360° air inlet swivel to prevent the trachea curling.
+ Lightweight, compact, portable.
+ Strictly under your control.
10 pieces are packed in one carton
Pad Dia
(L/min)
QP-113
3"(76)
15000
(bar)
3.5(99)
(mm)
90(6.3)
(Kg)
5"(125)
0.40
1.58(0.72)
3/8"
74.0
0.3
QP-123
Air Pistol Polisher
Air Inlet: 1/4" + Ergonomic cushion-grip handle.
+ Good in low noise than traditional one (74db)
+ Speed can be adjusted.
+ Lightweight, compact, portable.
10 pieces are packed in one carton
Pad Dia
(L/min)
QP-123
3"(76)
2100
3.5(99)
(bar)
(mm)
90(6.3)
(Kg)
5-5/16"(135)
0.40
1.69(0.77)
3/8"
74.0
0.21
QB-144/145
Air Angle Grinder / Roll Type Throttle
Air Inlet: 1/4"
+ Front exhaust.
+ Powerful 0.78 hp motor provides plenty of power
for rust and material removal.
+ Unique motor controller (Governor) virtually
eliminates over speed.
10 pieces are packed in one carton
Pad Dia
Spindle
Size
(L/min)
(bar)
(mm)
(kg)
QB-144
4"(100)
M10xP1.5
11000
6.0(170)
90(6.3)
8-7/8"(226)
0.78
4.0(1.81)
3/8"
87.8
1.2
QB-145
5"(125)
M14xP2.0
11000
6.0(170)
90(6.3)
8-7/8"(226)
0.78
4.0(1.81)
3/8"
87.8
1.2
QB-154/155
Air Angle Grinder / Lever Type Throttle
Air Inlet: 1/4"
+ Same features as QB-144/ QB-145, but with safety throttle lever.
10 pieces are packed in one carton
Pad Dia
Spindle
Size
(L/min)
(bar)
(kg)
(mm)
QB-154
4"(100)
3/8"-24
11000
6.0(170)
90(6.3)
9"(230)
0.78
3.8(1.73)
3/8"
87.8
1.2
QB-155
5"(125)
5/8"-11
11000
6.0(170)
90(6.3)
9"(230)
0.78
3.8(1.73)
3/8"
87.8
1.2
71
Complete air tool solutions
NEW PRODUCTS
QB-164/165
Air Angle Grinder / Roll Type Throttle
Air Inlet: 1/4"
+ Front exhaust.
+ Powerful 0.78 hp motor provides plenty of power
for rust and material removal.
+ Unique motor controller (Governor) virtually
eliminates over speed.
10 pieces are packed in one carton
Pad Dia
Spindle
Size
(L/min)
(bar)
(kg)
(mm)
QB-164
4"(100)
3/8"-24
11000
6.0(170)
90(6.3)
8-7/8"(230)
0.78
4.0(1.81)
3/8"
87.8
1.2
QB-165
5"(125)
3/8"-24
11000
6.0(170)
90(6.3)
8-7/8"(230)
0.78
4.0(1.81)
3/8"
87.8
1.2
3/8"
92.0
2.7
3/4"
86.0
2.1
QB-177
Air Angle Grinder / Lever Type Throttle
Air Inlet: 3/8" + Special treatment for the body makes it become
high strength and be not easy to break apart.
+ Exhaust direction is adjustable.
+ Overrunning governor and security trigger are
equipped.
6 pieces are packed in one carton
Pad Dia
QB-177
7"(178)
Spindle
Size
5/8"-11
(L/min)
7600
6.0(170)
(bar)
90(6.3)
(kg)
(mm)
11-13/16"(170)
1.0
7.26(3.3)
QB-179
Air Vertical Grinder / Lever Type Throttle
Air Inlet: 1/2"
+ Special treatment for the body makes it become
high strength and be not easy to break apart.
+ Powerful motor design.
+ Overrunning governor is equipped to prevent from
the risk of speedy rotation.
2 pieces are packed in one carton
Pad Dia
QB-179
72
9"(230)
Spindle
Size
5/8"-11
(L/min)
6000
7.0(198)
(bar)
90(6.3)
(kg)
(mm)
11"(279)
3.8
13.2(6.0)
Complete air tool solutions
SN-1032
Air Flux Chipper
Air Inlet: 1/4" +Quic shift chuck can easily replace the chisel .
10 pieces are packed in one carton
(L/min)
SN-1032
13
4000
4.23(120)
(bar)
90(6.3)
(mm)
11-1/2''(290)
(Kg)
2.92(1.33)
3/8''
91
14.5
SR-1101
Air Brush
Air Inlet: 1/4" + The delicate design of the sprinkle nozzle allows it
spray paint accurately on object.
+ The adjustable cup holder makes it user-friendly.
10 pieces are packed in one carton
Nozzle
Bore
mm
SR-1101
Color Cup Spray Control
Capacity
c.c
0.2
7.0
by Needle Adjustor
SP-101/102/103 /104 /105/111/112/113
Spring Balancer
Air Inlet: 1/4"
+ Cost-efficient,practical and compact.It uses rotary
adjusting cover for easier tension adjustment
without burden.
+ The housing is made of rustproof iron shell.The steel
wires and nylon ropes are available for option.
Further ,a ball-shape damper also can stop tool at a
fixed height in its recover stroke.
10 pieces are packed in one carton
Capacity Travel Rope
SP-101
SP-102
SP-103
SP-104
Kg
m
0.3~0.8
0.6~1.5
1.0~2.0
1.5~3.0
1.6
1.6
1.6
1.5
Cable
Cable
Cable
Cable
Rope Dia
Weight
mm
Kg
2.5
2.5
2.5
3.2
0.49
0.52
0.53
0.76
Capacity Travel Rope
SP-105
SP-111
SP-112
SP-113
Kg
m
3.0~5.0
0.3~0.8
0.6~1.5
1.0~2.0
1.5
1.6
1.6
1.6
Cable
Nylon
Nylon
Nylon
Rope Dia
Weight
mm
Kg
3.2
2.5
2.5
2.5
0.81
0.49
0.52
0.53
SP-212/213
Spring Balancer
+ Wider load range and designed in aesthetic
configuration .It uses rotary adjusting cover for
easier tension adjustment without burden.
+ The housing is made of rustproof fogged chromeiron, and nylon rope is used. Further ,a ball-shape
damper also can stop tool at a fixed height its
recover stroke.
Air Inlet: 1/4"
10 pieces are packed in one carton
Capacity
SP-212
SP-213
Travel
Kg
m
0.3~1.2
0.8~2.0
1.6
1.6
Rope
Nylon
Nylon
Rope Dia
Weight
mm
Kg
4.0
4.0
0.57
0.57
73
Complete air tool solutions
NEW PRODUCTS
JC-504 / 510
Air Blow Gun
Air Inlet: 1/4" + The look conforms to ergonomics.
+ The special material made handle makes user feels
comfortable.
60 pieces are packed in one carton
JC-507
Air Blow Gun
Air Inlet: 1/4" + The look conforms to ergonomics.
+ The special material made handle makes user feels
comfortable.
+ The sprinkle nozzle is 360°revolvable and
lengthened or shortened.
60 pieces are packed in one carton
(bar)
JC-504
JC-507
JC-510
4"
(Kg)
90-120(6.2-8.5)
220(15.1)
4.70(132)
90(6.3)
0.35(0.16)
3/8"
6-1/2" ~ 12" 90-120(6.2-8.5)
220(10.6)
5.10(144)
90(6.3)
0.48(0.22)
3/8"
75.0
220(10.6)
5.10(144)
90(6.3)
0.42(0.19)
3/8"
80.0
10"
90-120(6.2-8.5)
80.0
SB-201
Digital Tyre Inflator
Air Inlet: 1/4" + Accuracy + 3%
10 pieces are packed in one carton
Max
Pressure
(bar)
SB-201
Air Inlet
Air
Pressure
CFM
Inch
PSI
1.41
1/4''
90
Air Consumption
at 100 PSI
160(11.0)
Net
Weight Air Hose
LB(Kg)
Inch
0.70(0.32)
3/8''
Nozzle
Tyre valve clip
QD-291N
Air Saw Set
Air Inlet: 1/4" + 1pc
+ 1pc
+ 1pcs
+ 2pcs
+ 1pcs
+ 6pc
+ 6pc
Air saw tool
5 Pieces file set
1/4" 360° plug
Allen Key:4mm,3mm
mini oiler 1/4"
24T Saw Blade
32T Saw Blade
10 pieces are packed in one carton
Stroke
Length
mm
QD-291
74
10
Collet
Size
mm
5
Strokes
Per min.
spm
9000
(L/min)
4.0 (113)
(bar)
(mm)
(Kg)
90(6.3)
9-3/4"(250)
1.32(0.6)
3/8"
80.0
2.4
Complete air tool solutions
NC-0410(set)
1/2" Drive Air Impact Wrench 10pcs
+ 1pc - Air Impact Wrench :
+ 5pc - Impact sockets, 6 points, standard length :
11, 13, 17, 19, 21 mm
+ 1pc - Extension bar 5" :
+ 1pc - Mini Oiler 1/4" female x 1/4" male :
+ 1pc - 1/4" plug :
+ 1pc - Oil box
Air Inlet: 1/4"
4 pieces are packed in one carton
Air lmpact Wrench
Item No.
Item No.
Air lmpact Wrench
NC-0410M0
NC-4212
NC-0410M2
NC-4217
NC-0410M1
NC-4215
NC-0410M3
NC-4258
QA-0115(Set) / QA- 0615(Set)
Heavy Duty Air Die Grinder-Set 15pcs
Air Inlet: 1/4" + 1pc
+ 1pc
+ 2pcs
+ 5pcs
+ 5pcs
+ 1pc
Air Die Grinder
Collet (3 mm or 1/8")
Spanner Wrench
Grinder Stone (3 mm or 1/8")
Shank Stone (6 mm or 1/4")
Plug (adapter)
10 pieces are packed in one carton
A
QA-111
QA-211
QA-611
B
(L/min)
(bar)
(mm)
(Kg)
6&3
1/4" & 1/8"
25000
10.0(283)
90(6.3)
6"(155)
0.3
0.84(0.38)
3/8"
81.5
6&3
1/4" & 1/8"
20000
10.0(283)
90(6.3)
7-1/2"(155)
0.9
1.43(0.65)
3/8"
75.7
1.8
0.8
6&3
1/4" & 1/8"
19000
10.0(283)
90(6.3)
6"-1/8''(160)
0.3
1.12(0.51)
3/8"
74.4
1.7
SQ-0217(Set)
Air Powered Brake Caliper Wind Back Tool-Set 17pcs
Air Inlet: 1/4" + This air powered brake caliper wind back tool uses air to
launch instead of the original manual fashion.
+ It is available to operate left and / or right hand helix bolt.
+ Repairing time can be greatly reduced.
+ It is suitable to all kinds of cars.
10 pieces are packed in one carton
(bar)
SQ-0217
90(6.3)
(Kg)
3.3(1.5)
75
Complete air tool solutions
Impact Socket
1/2" MA411M
Impact Standard Socket
+ 1. 1/2" drive standard length
+ 2. 6 points
+ 3. Metric size
MA411M08
MA411M09
MA411M10
MA411M11
MA411M12
76
8
9
10
11
12
67
67
70
71
72
10 / 200
10 / 200
10 / 200
10 / 200
10 / 200
MA411M13
MA411M14
MA411M15
MA411M16
MA411M17
MA411M19
MA411M21
MA411M22
MA411M24
MA411M27
13
14
15
16
17
19
21
22
24
27
72
77
112
112
115
120
125
143
152
176
10 / 200
10 / 200
10 / 160
10 / 160
10 / 160
10 / 160
6 / 120
6 / 120
6 / 120
6 / 120
Complete air tool solutions
1/2" MA431M
Impact Standard Socket
+ 1. 1/2" drive Deep version
+ 2. 6 points
+ 3. Metric size
MA431M13
MA431M17
MA431M19
MA431M21
MA431M22
13
17
19
21
22
163
248
244
237
292
6 / 120
6 / 96
6 / 96
6 / 96
5 / 60
MA431M24
MA431M27
24
27
304
351
5 / 60
5 / 60
77
Complete air tool solutions
Impact Socket
MA42006M
1/2" Air Stubby impact Socket SET
LONG
Length
inch
MA42006M 1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
13
17
19
21
22
24
54
70
80
90
100
110
28
28
28
28
28
28
3/4" MA611M
Standard Impact Socket
+ 3/4" drive standard length
+ 6 points
+ Metric size
MA611M17
MA611M19
MA611M21
MA611M22
MA611M24
MA611M26
MA611M27
17
19
21
22
24
26
27
316
329
341
346
352
358
380
MA611M29
MA611M30
MA611M32
MA611M35
MA611M36
MA611M38
MA611M55
6 / 48
6 / 48
6 / 48
6 / 48
6 / 48
6 / 48
6 / 48
1" MA811M
Standard Impact Socket
+ 1" drive standard length
+ 6 points
+ Metric size
MA811M27
MA811M30
MA811M32
MA811M33
MA811M36
27
30
32
33
36
538
592
679
700
729
1 / 24
1 / 24
1 / 24
1 / 24
1 / 24
3/8" MB371S
3/8" Drive Bit Holder
MB371S08
78
Total
Leught
inch
1/4"
Length
40
44
10 / 106
29
30
32
35
36
38
55
404
412
460
497
519
540
1160
6 / 48
6 / 48
6 / 36
6 / 36
6 / 36
2 / 24
1 / 20
Complete air tool solutions
1/2" MB471
1/2" Drive Bit Holder
MB471S08
MB471S10
inch
1/4''
5/16''
69
70
12 / 216
12 / 216
1/2" ME421
1/2" Drive Extension Bar
Total
Leught
)
inch (
ME421-05 5" (125)
295
2/ 40
1/2" ME4711
1/2" Drive Universal Joint
ME4711
Total
Leught
)
inch (
2-1/2" (65) 167
5/ 60
3/4" ME621
3/4" Drive Extension Bar
Total
Leught
)
inch (
ME621-07 7" (175)
867
2/20
3/4" ME6711
3/4" Drive Universal Joint
ME6711
Total
Leught
)
inch (
4-1/2" (116)
742
2/20
3/4" ME68
3/4" Drive Adapter
Spec
ME684
inch (
)
3/4" F x 1/2" M
313
6/48
3/4" ME016/ME916
3/4" Drive Locking Ring/3/4" Drive Locking Pin
ME01637
ME91635
ME01644
ME91645
Ring
Pin
Ring
Pin
5.5
4.0
5.5
4.0
37
35
44
45
MA611M (17~46 mm)
MA611M (48~60 mm)
79
Complete air tool solutions
After Market
Support
Packaging
All M7 Products Come in Eye-Catching Color Packages
AD-307
Wall Type Display Stand
+ Powder coating
+ Attachment
1pc
2pcs
2pcs
1pc
4pcs
Brand Plate
Angled Steel Frame
Shelf
Bottom Shelf
Steel Plate With Hole
AD-351
Optional ltem
Overall Size(mm)
Width X Depth X Height
AD-307
900 x 500 x 2230
AD-361
Optional ltem
AD-35
Complete set of Tool Base
Item No.
Adaptor Type
Contents
AD-3501
Europe
SY-211M
AD-3521
AD-351
SY-221M
AD-3522
AD-351
SY-231M
AD-3523
AD-351
AD-3502
Japan
AD-3503
U.S.A.
80
Complete air tool solutions
AD-306
Table Type Display Stand
+ 1 pc Transparent DM shelf
+ 2 pcs support frame
+ 1 pc Bottom shelf
+ 3 set (AD-3521/3522/3523)
AD-308
Tower Type Display Stand
+ 1pc Lamp case Baner
+ 2pcs Round Plate (Round)
+ 1pc Support Rod (inside the Lamp Case)
+ 2pcs Pillar
+ 1pc Bottom Plate
AD-305-41
Optional ltem
Contains
Package
net weight gross weight length width
highly
Lamp Case Set
4.35
5.35
530
510
101
Display Pillar
8
9
930
330
180
Display Stand
Bottom Plate
10.45
11.45
810
820
70
AD-36
Item No.
Adaptor Type
AD-3601
Contain
SY-211M
AD-3521
AD-305-41
SY-221M
AD-3522
AD-305-41
SY-231M
AD-3523
AD-305-41
Europe
AD-3602
Japan
AD-3603
U.S.A.
81
Complete air tool solutions
Retailer
Promotion
ZC-201
T-shirt
+ Size S / M / L / XL
ZB-302
Pen
82
Complete air tool solutions
ZC-202
+ Color : black
Cap
83
Complete air tool solutions
After Market
Repair Kits
M7 provides specialized repairing tools for your after market need
84
Working environment:
1.Using these tools in any potentially explosive environment is strictly prohibited.
2.It is always recommended that these types of tools must be operated when standing on a solid or firm location.
3.Always use these tools in a well ventilated area.
4.Slipping, stumbling and falling are the major causes of potential serious injury, therefore, a clean and clutter free surface in the
working area before operating the tools is strongly recommended.
Complete air tool solutions
User's Manual of Air Impact Wrench
Air supply and connection requirements:
1.The maximum recommended air pressure during operation must not exceed 90 psi (6.3bar). Higher air pressure may create
unsafe operating conditions for the tool and the user.
2.The compressed air should be cooled and have a water filter installed at the outlet end of the compressor. Even with a water filter
installed, some water may still condense in the piping or hose and will enter the tool mechanism causing premature damage to
the tool. Therefore, it is recommended to install an air filter-lubricator device somewhere between the tool and the compressor.
3.Always use an air compressor of the proper capacity to operate each tool.
4.Clean the hose with a blast of compressed air before connecting the hose to the air tool. This will prevent
dust inside the hose from entering the tool and causing possible rust or malfunction.
both moisture and
Ideal system connection:
The diameter ΦA required for the inlet pipe
is recommended on the specification table.
The diameter ΦB required for the branch pipe (from to ) should be 2 times as large as ΦA.
ΦB = 2 x ΦA
The diameter ΦC required for the primary air supply (from to ) should be 3 times as large as ΦA. ΦC = 3 x ΦA
The length for the inlet pipe
should be less than 15 feet (4.5m).
85
Complete air tool solutions
?
Trouble Shooting
Impact Wrench
Problem (phenomenon)
1. The tool runs automatically or tool
will not shut off.
2. Torque decreases slightly.
3. Sound of air leaking.
Possible Cause
1. Dust jam.
Recommended solution
1. Clean and remove the dust from the
air inlet.
2. Clean the throttle valve.
3. Apply a few drops of recommended
pneumatic oil into the air inlet.
4. Pull the trigger and run for several
seconds to get rid of the dust.
1. Severe torque loss, but will still
run at full free speed,
2. Tool will not run.
1. The rotor blades may be damaged,
2. The screws may be loose.
3. The reverse button (knob) may
be out off position.
4. Some component(s) in motor
housing or hammer housing
may be worn off.
1. Check and replace new ones, if
necessary.
2. Tighten all loose screws.
3. Adjust the button.
4. Check and replace them, if
necessary.
1. Air leaks from hammer housing or
rear cover.
1. The screws may be loose.
2. The gasket seal may be broken.
1. Tighten all loose screws.
2. Replace it.
Note: The consumable parts are the rotor blades, anvil and hammer.
Ratchet Wrench
Problem (phenomenon)
1. The tool runs automatically or tool
will not shut off.
2. Torque decreases slightly.
3. Sound of air leaking.
1. Severe torque loss, but will still
run at full free speed,
2. Tool will not run.
Possible Cause
1. Dust jam.
1. The rotor blades may be damaged,
2. The screws may be loose.
3. The reverse button (knob) may
be out off position.
4. Some component(s) in motor
housing or hammer housing
may be worn off.
Recommended solution
1. Clean and remove the dust from the
air inlet.
2. Clean the throttle valve.
3. Apply a few drops of recommended
pneumatic oil into the air inlet.
4. Pull the trigger and run for several
seconds to get rid of the dust.
1. Check and replace new ones, if
necessary.
2. Tighten all loose screws.
3. Adjust the button.
4. Check and replace them, if
necessary.
Note: The consumable parts are the rotor blades, gears and ratchet anvil.
Die Grinder
Problem (phenomenon)
1. The tool runs automatically or tool
will not shut off.
2. Torque decreases slightly.
3. Sound of air leaking.
1. Severe torque loss, but will still
run at full free speed,
2. Tool will not run.
Possible Cause
1. Dust jam.
2. Trigger may be damaged!
1. The rotor blades may be damaged,
2. The screws may be loose.
3. The Air Regulator may not be in
correct position.
4. The Collet Nut may be loose.
Note: The consumable parts are the rotor blades, bearings and collet.
86
Recommended solution
1. Clean to remove the dust from the air
inlet.
2. Clean the throttle valve.
3. Apply a few drops of recommended
pneumatic oil into the air inlet.
4. Push trigger and run for several seconds
to get rid of the dust.
5. Inspect the trigger, correct or replace the
related component when necessary.
1. Check and replace with new ones, if
necessary.
2. Tighten all loose screws.
3. Check and correct.
4. Check and tighten.
Air Cutting Off Tool
1. The tool runs automatically or tool
will not shut off.
2. Torque decreases slightly.
3. Sound of air leaking.
1. Severe torque loss, but will still
run at full free speed,
2. Tool will not run.
Air angle Grinder
1. The tool runs automatically or tool
will not shut off.
2. Torque decreases slightly.
3. Sound of air leaking.
1. Severe torque loss, but will still
run at full free speed.
2. Tool will not run.
Possible Cause
1. Dust jam.
2. Trigger may be damaged!
1. The rotor blades may be damaged,
2. The screws may be loose.
3. The Air Regulator may not be in
correct position.
1. Dust jam.
2. Trigger may be damaged!
1. The rotor blades may be damaged,
2. The screws may be loose.
3. The bevel gears may not have
enough grease.
4. The bevel gears may be worn off.
Belt Sander
1. The tool runs automatically or tool
will not shut off.
2. Torque decreases slightly.
3. Sound of air leaking.
1. Severe torque loss, but will still
run at full free speed.
2. Tool will not run.
1. Dust jam.
1. The rotor blades may be damaged.
2. The screws may be loose.
3. The belt may not be seated
correctly.
4. The bearings may be damaged.
Air Sander
1. The tool runs automatically or tool
will not shut off.
2. Torque decreases slightly.
3. Sound of air leaking.
1. Severe torque loss, but will still
run at full free speed.
2. Tool will not run.
1. Dust jam.
1. The rotor blades may be damaged,
2. The pad may not be correct.
3. The screws may be loose.
Air Shear
1. The tool runs automatically or tool
will not shut off.
2. Torque decreases slightly.
3. Sound of air leaking.
1. Severe torque loss, but will still
run at full free speed,
2. Tool will not run.
1. Dust jam.
1. The rotor blades may be damaged,
2. The cutting blades may not be
sharp enough.
3. The cutting blades may not be in
the correct position.
4. The lock screws for cutting blades
may be loose.
Recommended solution
1. Clean and remove the dust from the air
inlet.
2. Clean the throttle valve.
3. Apply a few drops of recommended
pneumatic oil into the air inlet.
4. Push trigger and run for several seconds
to get rid of the dust.
5. Inspect the trigger, correct or replace the
related component when necessary.
Complete air tool solutions
Problem (phenomenon)
1. Check and replace with new ones, if
necessary.
2. Tighten all loose screws.
3. Check and correct.
1. Clean and remove the dust from the air
inlet.
2. Clean the throttle valve.
3. Apply a few drops of recommended
pneumatic oil into the air inlet.
4. Push trigger and run for several seconds
to get rid of the dust.
5. Inspect the trigger, correct or replace the
related component when necessary.
1. Check and replace new ones, if
necessary.
2. Tighten all loose screws.
3. Apply some multiple-purpose grease.
4. Replace them.
1. Clean and remove the dust from the air
inlet.
2. Clean the throttle valve.
3. Apply a few drops of recommended
pneumatic oil into the air inlet.
4. Pull the trigger and run for several
seconds to get rid of the dust.
1. Check and replace with new ones, if
necessary.
2. Tighten all loose screws.
3. Adjust it.
4. Replace them.
1. Clean and remove the dust from the air
inlet.
2. Clean the throttle valve.
3. Apply a few drops of recommended
pneumatic oil into the air inlet.
4. Pull the trigger and run for several
seconds to get rid of the dust.
1. Check and replace with new ones, if
necessary.
2. Check and replace with the correct one.
3. Tighten all loose screws.
1. Clean and remove the dust from the air
inlet.
2. Clean the throttle valve.
3. Apply a few drops of recommended
pneumatic oil into the air inlet.
4. Pull the trigger and run for several
seconds to get rid of the dust.
1. Check and replace with new ones, if
necessary.
2. Check and replace with new ones, if
necessary.
3. Check and adjust them.
4. Check and tighten.
Note: The consumable parts are the rotor blades and bearings.
87
Complete air tool solutions
Problem (phenomenon)
Possible Cause
Air Saw
1. The tool runs automatically or tool
will not shut off.
2. Torque decreases slightly.
3. Sound of air leaking.
1. Dust jam.
2. Trigger may be damaged!
Recommended solution
1. Clean and remove the dust from the air
inlet.
2. Clean the throttle valve.
3. Apply a few drops of recommended
pneumatic oil into the air inlet.
4. Pull the trigger and run for several
seconds to get rid of the dust.
1. Severe torque loss, but will still run at
full free speed.
2. Tool will not run.
1. The rotor blades may be damaged.
1. Check and replace with new ones, if
necessary.
1. Severe decrease in reciprocating speed.
1. The drive motor may be dirty.
1. Cleaning required.
Air Drill
1. The tool runs automatically or tool
will not shut off.
2. Torque decreases slightly.
3. Sound of air leaking.
1. Severe torque loss, but will still
run at full free speed.
2. Tool will not run.
1. Dust jam.
1. The rotor blades may be damaged,
2. The keyless chuck may be
damaged.
Air Screwdriver
1. The tool runs automatically or tool
will not shut off.
2. Torque decreases slightly.
3. Sound of air leaking.
1. Severe torque loss, but will still
run at full free speed,
2. Tool will not run.
1. Dust jam.
1. The rotor blades may be damaged,
2. The screws may be loose.
3. The Reverse Knob may be damaged
or not in the right position.
4. The impact mechanism may be
damaged.
1. Clean and remove the dust from the air
inlet.
2. Clean the throttle valve.
3. Apply a few drops of recommended
pneumatic oil into the air inlet.
4. Pull the trigger and run for several
seconds to get rid of the dust.
1. Check both possibilities and replace
with new ones, if necessary.
1. Clean and remove the dust from the air
inlet.
2. Clean the throttle valve.
3. Apply a few drops of recommended
pneumatic oil into the air inlet.
4. Pull the trigger and run for several
seconds to get rid of the dust.
1. Check both possibilities and replace
with new ones, if necessary.
2. Tighten all the loose screws.
3. Check and adjust, or replace with a new
one if necessary.
4. Check and replace with a new set, if
necessary.
Note: The consumable parts are the rotor blades and bearings.
Air Hammer
1. The tool runs automatically or tool
will not shut off.
2. Torque decreases slightly.
3. Sound of air leaking.
1. The tool doesn’t work
1. Dust jam.
1. The piston may be jammed or
damaged.
2. The size of chisel may not be
correct.
1. Clean and remove the dust from the air
inlet.
2. Clean the throttle valve.
3. Apply a few drops of recommended
pneumatic oil into the air inlet.
4. Pull the trigger and run for several
seconds to get rid of the dust.
1. Check and replace the related
component when necessary.
2. Check and replace with the correct one.
Note: The consumable parts are the throttle valve and piston.
Hydraulic Riveter
1. The tool runs automatically or tool will
not shut off.
2. Power decreases slightly.
3. Sound of air leaking.
1. The tool doesn’t work
1. Dust jam.
1. The size of rivet may not be
suitable.
2. The size of rivet nose may not be
correct.
1. Clean and remove the dust from the air
inlet.
2. Clean the throttle valve.
3. Apply a few drops of recommended
pneumatic oil into the air inlet.
4. Pull the trigger and run for several
seconds to get rid of the dust.
1. Check and use the correct ones.
2. Check and replace with the correct one!
Note: The consumable parts are the rivet nose, jaw housing, front housing and spring.
Note:
For more details about the above recommended solutions, please refer to the use'r
Manual attached along with each product.
88
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement