null  null
4. Turning ON/OFF
1) Turn ON: Press and hold “MFB” button 3 seconds to turn
on the headset, after the beep, the blue LED will flash 4 times.
2) Turn OFF: On standby mode, press and hold “MFB”
button 3 seconds to turn off, after the beep, the red LED will
flash 4 times.
Banpa Bluetooth Headset
BH790 User Manual
1.About Bluetooth Technology
Bluetooth wireless technology is set to revolutionize the personal
connectivity by providing freedom from wired connectionsenabling links and connectivity between notebook/laptop,mobile
phones,portable handheld devices and other Bluetooth enabled
devices within 10 meters,Utilizing global sound & digital
data2.4GHz ISM transmission,it makes global communication in
the way you've never dreamed of!
2.Appearance and function
1)MFB ( Multi-Function Button);
3)Volume up(V+);
5)Charging Port;
3.Function of buttons
MFB
Volume up & volume down
Pairing password
2)Microphone;
4)Volume down(V-);
(a)Turn on/off; (b)Pairing
(c)Answer call; (d)Hang up
(e)Reject a call; (f)Voice dial
(g)Redial the last call
(a)adjust the volume
(b)Call transfer
(c)Mute switch
5. Pairing
You are required to pair the headset with your mobile phone
before using it.
1)Place the headset within 1 meter with the mobile phone
2)Make sure the headset is off
3)Press and hold “MFB” button 5 seconds, the red and blue
LED lights flash alternately. It enters the pairing match state.
4)Turn on the Bluetooth on the mobile phone ( please refer
to the user manual of the mobile phone)
5)Select BH790 device from the mobile phone
6)Input the pairing code “0000” and confirm. After pairing
successfully, the red and blue LED lights flash alternately,
after the beep, it enters the standby mode and the blue LED
light flash every 6 seconds.
Note: If the pairing not successfully after 2 minutes, turn off
the headset and try the matching steps again.
A: Headset to mobile phone:
During a call, press the “MFB” button twice.
B: Mobile phone to headset:
Press the “V+” and “V-” buttons at the same time.
Note: in three calls mode, transfer calls function will be off.
8)Mute microphone
A: mute: during a call, press and hold “V-” button for 2
seconds
B: remove mute: press and hold “V+” button for 2 seconds
9)answer or reject another call
-Answer the second call hold active call:during a call,when
another call coming ,double pree the “MFB” to pick up the
call and the active call will be hold.
-Answer the second call end active call:during a call,when
another call coming,short press the “MFB”to pick up the
call and end the active call.
-Reject the secomd call:during a call,when another call
coming,press and hold “MFB”for 2 seconds to reject the
call.
-During the three way call,double press “MFB”button twice
to swap the call.
-During the three way call,short press “MFB”button to end
the current call and another call will be active automatic.
6. Connection
After pairing, the headset is on standby mode. If no headset
indicates on the mobile phone, please take the following
steps to activate the Bluetooth.
1)on mobile phone: select the device “BT790” for
connection
2)on headset: press the “MTB” button, and select “ accept
“ from the mobile phone.
9. reset the headset to default settings
On the standby mode, press and hold “V+” and “V”buttons at the same time for 10 seconds, and then press
and hold “MFB” button for 3 second to turn off the
headset.
Note: After the reset, the headset will enter the pairing mode
when it turned on.
7. Disconnection
If you want to disconnect the headset from your mobile
phone, take the following steps:
1)Turn off the headset directly
2)Disconnect from the mobile phone
Note: After 10 minutes of disconnection, the blue LED light of
the headset will flash 5 seconds a time.
10. Low battery indication
When the voltage of the headset below 3.3V, the alert beep
will occur every 30 seconds. Meantime, the headset indicator
on the mobile phone turns red( need to mobile phone).
When the voltage below 3.0V, the headset turn off
automatically.
8. Using the headset
1)Answer calls
When you receive calls, short press the “MFB” button on
the headset to answer calls.
2)End calls
During the call, short press the “MFB” button to hang up.
3)Reject calls
When you receive calls, press and hold the “MFB” button
for 2 seconds.
4)Voice dialing
On Standby mode, press the “MFB” button until you hear
the beep, speak out the voice tag.
Note: mobile phone is required to support voice dial (for
more information, please refer to the manual of the mobile
phone)
5)Redial the last call
Press the “MFB” button twice to redial the last number.
6)Adjust the volume:
During the call, press “V+” or “V-” to turn up or turn
down the volume
Notice: If the volume turned to the highest or lowest, the
headset will beep.
7)Transfer calls
11. Battery Charging
To protect the battery, please charge the headset when the
battery low. When charging, the red LED light is on. When
charging completes, the blue LED light is on.
12.LED indication
Condition of the headset
LED indication
Power off
Blue LED light off
Turning on
Blue LED light flash 4 times
Turning off
Red LED light flash 4 times
Standby mode
( connected)
Blue LED light flash twice
ever y 5 seconds
Standby mode
(disconnected)
Blue LED light flash twice
ever y 5 seconds
Call activated
Blue LED light flash twice
ever y 5 seconds
Pairing mode
Blue LED light flash twice
ever y 5 seconds
Play Music
Blue LED light flash twice
ever y 5 seconds
Mute
Blue LED light flash twice
ever y 5 seconds
Charging
Red LED light on
Charging Complete
Blue LED light on
13.Product specification
- Bluetooth compatible specifications: V4.1
- Operating frequency band: 2.4GHz-2.48GHz unlicensed ISM
band
- Output Power: Class 2 power Output, up to 10 meters
- Support Profiles: HSP, HFP1.5, A2DP Profiles
- Support Multiple Paired Devices: Up to 8 devices
- Integrated with the SDP echo cancellation
- Battery status display on the phone (only support IOS
device)
- Battery: 61mAh (Rechargeable Lithium Polymer), 3.7V DC
- Talk time: around 8 hours
- Music play time: around 7 hours
- Standby time: up to 130 hours
- Charge time: less 2 hours
- Power Input Voltage: 5V
- Operating temperature range: -20C°~ + 70C°
- Weight: 18g
- Size: 62*39*13mm
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement