SEVEN STARS
®
LASER DISPLAY SYSTEM
USER MANUAL
SEVEN STARS
Big Dipper Laser Science And Technology Co., Ltd
REV: 1.00
®
Please read carefully before installing or operating
Laser Display System User Manual
Model:B2000+RGB
Notices
1. This is 3B laser product. Avoid eyes direct exposure to the
laser light.
2. Operate abide by the user manual. Do not disassemble or
repair the system by yourself. When there is a problem, please
contact technician, or your local dealer.
3. Installation should be done by professional technician.
4. Please set the laser product far away from those things as
strobe light.
5.The system should be kept dry. please don’t exposure the
system to wet or dust-laden environment need water proof
environment in the open air
6. Do not touch the system by wet hand or pull the power cable
forcefully.
7. The work temperature is 10-40℃, so the laser conduct
doesn’t work normally until it reach the work temperature when
taking it in from cold environment .
8. Do not turn on or off the system frequently, and avoid keep it
working for long time.
9. Prevent from strong vibration or G-shock to the system.
10. Prevent other harmful objects from entering the system.
11. Keep at least 1 meter between the system and the objects in
the lighting.
Page 1
12. Connect the power cable after the system has been
installed.
13. Before powering on the system, be sure the power cable is
connected into the power socket well.
14.
Turn off the system for 25 minutes after running constantly
for three hours, ensure that the system is able to cool down in a
suitable environment.
15.
Turn on the computer after the laser display system is on,
Maintenance
Clean the lens regularly. Do not use a wet cloth or chemicals, but a
cotton swab with alcohol . The maintenance period depends on the
usage frequency and surrounding conditions of the LASER display
system. It recommended that the system should be cleaned every
15 days.
or you must power on the computer again.
Warning
16. When to be transported, use the original package to avoid
Power off any related system before maintenance.
Shaking.
17.
This sign indicates separate collection for electronics
and electrical equipment.
Declare
The end-user of this product should abide by the above instructions
Inspection
and warnings. Performing actions which was advised not to do so as
Check that the following components are present within the package
when receiving - from the list below:
1 x LASER display system
1 x User manual
1 x Power cable
1 x DMX cable(optional)
stated by this manual may void the warranty of this laser display
system. If the problem are caused by ignoring operation manual, the
dealer will not take charge.
All products made from Big Dipper Laser Company have anti - fake
Installation
identification. please verify
1. Be sure that there is no flammable or explosive subjects in the
bottom of the case to ensure the interests of consumers.
the anti-counterfeit label at the
range of at least 1.5 meters. At the same time, keep more than
half a meter between the wall and LASER display system.
2. Before installation, please check and make sure the power
supply voltage meet requests of the system.
3. Please check ventilation and fans or exhaust passages are
cleaned
Page 2
Page 7
10.Display
mode
11.Wave
12. Color
0-69
70-139
140-209
210-255
0-10
11-200
201-255
0-255
Normal display
Dot-line display
Subsection display
Dot display
No wave
Frequency low /high
Amplitude low /high
White-Red-Green--Blue-Purple-Yellow -Cyan
Subsection(GBR)-Subsection(PCY)-Subsection(R
GBYPCW)
Color counterchange(RGB)-Color
counterchange(CYP)-Color
counterchange(WRGBYC)- sound change color
Manual gradually draw
13.
0-149
Gradually
150-255 Auto gradually draw
draw
Remark: From 3rd to 13th channel effect only on 2nd channel 0-79 selection
value graphics effectively
Remark
4. The equipment should be fixed firmly
5. For security considerations ,please connect the earthing
conductor to ground
Back panel
Key-press function instruction
1.Graph size adjustment
2 Microphone:Sound signal IN
DMX512 mode, breaks-up signal will let laser diode shut off.
ADDRESS: DMX address setup
1. When the 10th code is ON, the function for 1-9 per below:
The 1st code is off------sound mode (host LASER)
The 1st code is on------Auto mode ( host LASER)
3 DMX 512 OUT: DMX signal output.
4.MX 512 IN: DMX signal input.
5. DMX ADDRESS: Binary format switch.
6. F3AL 250V:Three core Power Socket(AC)
7. POWER ON/OFF: Power Switch
The 3st code is on------ Auto animation( host LASER)
The 2nd code is on --- Slave laser
2.
When Dip Switch 10 is set to “OFF”, the system can be
controlled by DMX512.
Page 6
Page 3
DMX channel setting
Technical Parameters
Parameters
1
2
Model
LASER diode
Power supply
3
LASER power
4
Scanner angle
5
DMX Channels
6
Effect
7
Control mode
9
Dimensions
10
Net weight/
Gross weight
B2000+RGB
Channel No.
DMX512
value
95-255
Shut off the Laser diode
Sound control mode
AUTO mode
Auto mode for animation
Manual
Static patterns
Animation
Dynamic pattern
0-255
8 levels adjustment(0-255)/30=(0-8)
0-167
Manual
Auto Right/Left
Auto Left/Right
Auto Bounce Right/Left
Manual
Auto Down/Up
Auto Up/Down
Auto Bounce Up/Down
No zoom
Manual zooming
Auto zooming out
Auto zooming in
Auto zooming
No stretch
Manual stretch
Auto stretch
No stretch
Manual stretch
Auto stretch
No rotating
Manual rotation
Auto clockwise rotation
Auto anti-clockwise rotation
0-51
Red/Green/Blue
100-240VAC, 50/60Hz
52-103
1.Play mode
+/-30°
13
Can show animation with blanking ,
patterns can be zoomed in or zoomed out
synchronously (or asynchronously) in
vertical or horizontal orientation, the same
motion is effected on the offset, rotation,
wave, dot-line and so on.
Sound、Auto(Master-slave is available)、
DMX
300*200*137mm
104-155
156-207
R>100mW G>50mW B>150mW
208-255
0-79
2.Patterns
3.Strobe
4.Horizontal
move
80-94
168-188
189-209
210-255
0-167
5.Vertical
move
2.5/3.1KGS
168-188
189-209
210-255
0-10
11-104
6.Zoom
105-154
155-204
205-255
7.Horizontal
stretch
8.Vertical
stretch
9.Rotation
Page 4
Content
0
1-150
151-255
0
1-150
151-255
0
1-180
181-217
218-255
Page 5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement