4.3"color tft video door phone indoor monitor 4.3"color tft video door

4.3"color tft video door phone indoor monitor 4.3"color tft video door
4.3"COLOR TFT VIDEO DOOR PHONE
INDOOR MONITOR
E430C
E430C-W32
E430C-W64
Top Way Intelligent Science & Technology Co., Ltd
http://www.kenwei.com
Content
Products Introduction
Feature and parts
Operation
B&W image memory introduction
B&W image memory operation
OSD menu operation
Specifications and accessories
Installation
Installation attention
Connection diagram
Wiring length and wire material requirement
Connection between monitor and camera (1-1)
Connection between monitor and camera (1-2)
Connection between 1 monitor, 2 camera and 1 sub-phone KW-111
Troubles shooting guide
Parameters
Products Introduction
3
4
5
8
8
9
11
12
14
15
15
15
16
17
18
19
Thank you for purchasing our product of building intercom system series.
Please read the instructions carefully and follow the directions before installing
the products. Any problem regarding to the product, please inquire your
supplier.
General features:
Monitor and remote unlock
Kinds of chord ring for option, with clear tone
Color, brightness and contrast adjustable
No bother (mute) function
Support B&W image memory
Talk volume adjustable
Caution: To avoid the risk of electric shock, please don't remove
cover or back. Please ask professional person if maintenance
needed.
Remind users that important operation and maintenance guide
are included in the attached user's manual.
Remark
*
reserves the right to change or modify design, features, functions
and specifications without any prior notice for the improvement and
promotion of products' quality.
2
3
Operation
Feature and parts
1.ON / OFF
a.After connect the power, dial the power switch to
ON (pic. 1), the unit will automatically enter into
standby mode, power LED light (green).
b.Dial the power switch to OFF (pic. 1), the power would be
closed, the unit will enter into OFF mode, power LED turn
off.
Screen
Power LED(Green)/
Away LED (Red) /No bother LED(Blue)
Monitor
Speaker
Intercom
Unlock
Talk / Exit
Mic
Navigation button
ON
Power switch
OFF
Connection
terminal
Pic. 1
2.Call remind
a.Door 1 calls in
When Door 1 calls in, the indoor monitor will automatically display its image, and
display CH1 on the picture. Also sounds ring at the same time. (no ringing under no
bother mode.)
b.Door 2 calls in
When Door 2 calls in, the indoor monitor will automatically display its image, and
display CH2 on the picture. Also sounds ring at the same time. (no ringing under no
bother mode.)
c.Intercom
When monitor A calls sub-phone, both of units will sound “DO LONG DONG” at
intervals.
3.Monitor / Exit
a.Under standby mode, press“
”(pic. 2) to monitor Door 1,
and display CH1 on the picture. The unit will automatically
exit monitor mode and back to standby after 90s.
b.Under Door 1 monitor mode, press“
”(pic. 2) again to
Pic. 2
monitor Door 2, and display CH2 on the picture. The unit will
automatically exit monitor mode and back to standby after 90s.
Remark: under monitor mode, only picture without voice, and cannot open the door.
c.Under Door 2 monitor mode, press“
”(pic. 2) to exit monitor mode, and back to
standby.
4.Talk / Stop
a.Call to talk:
When outdoor camera calls in, indoor monitor will sound ring. Press “
to enter into talk mode.
b.Monitor to talk:
Under monitor mode, press“
”(pic. 3) to enter into talk
mode.
”(pic. 3)
Pic. 3
4
5
Operation
Operation
c.Stop:
Under talk mode, press“
”(pic.3) to exit talk, and back
to standby. Or after 90s the system will auto exit.
5.Unlock
Under talk mode, press“
”(pic. 4) to open the door.
6.Chord ring select
Under standby mode, press“
”or“
”(pic.5), the
unit will sound the current ring. Then each time you pressing,
the ring would be changed. Choose the one you need and
press“
”(pic. 3) to save. Or the unit will
automatically save the ring after 30s. (Current
saved ring is for Door 1, Door 2's ring is the next
one of Door 1.)
Remark: After power off, the unit's ring is default to
DING DONG. Intercom ring is default to “DU LONG
DONG” at intervals, cannot change.
7.Ring volume adjust
Under chord ring select mode, press“
the ring volume.
Pic. 3
Pic. 4
Pic. 5
”(pic.6) to adjust
Pic. 6
8.No bother mode
a.Under standby mode, press and hold“
”(pic.2), no
bother LED light, and the unit sounds DI, now is no bother
mode.
Pic. 2
b.Under no bother and standby mode, press and hold“
”
(pic.2) till no bother LED turn off, and the unit sounds DI DI, now exit no bother
mode.
9.Away management mode (pass this item if the unit without memory)
a.Under standby mode, press“
”(pic. 7), away management
LED light, means the unit is under away management mode.
b.Under standby mode, press“
”(pic.7), when the away
management LED turns off, means the unit exit this mode.
Pic. 7
6
10.Navigation button
Under monitor / talk mode, the navigation button is default
to OSD menu. Now press“
”(pic.8), you can choose
OSD menu or image memory.
11.Intercom
a.Main monitor calls sub-phone KW-111
When the sub-phone is under standby mode, press and hold
“
”(pic.9), now both 2 units will sound “DU LONG
DONG” at intervals. Pickup sub-phone's handset to talk.
b.Sub-phone KW-111 calls main monitor E430C
When the main monitor is under standby mode, pickup
sub-phone's handset and hold“
”(pic.9), now the main
monitor will sound “DU LONG DONG”. Press main
monitor's“
”(pic.3) to talk.
Pic. 8
Pic. 9
12.Outdoor call transfer (with sub-phone KW-111)
Under talk mode (monitor and camera talk), press and hold
Pic. 3
“
”(pic.9), the main monitor / sub-phone KW-111 and relevant outdoor camera
will sound “DU LONG DONG” at intervals. Now pick up KW-111's handset to talk.
B&W image memory introduction
The unit with B&W image memory has the following function:
1.Record picture
The unit can record the picture with time display, max. to 64pcs.
2.Review picture
The users can review the picture under monitor or talk mode.
3.Auto-off function
During picture reviewing, if you don't press any button which related to image
memory, the unit will automatically exit image memory mode after 10s.
4.Time display and edit
During operation of image memory, the unit will display the time, and you can edit
time and date. (under normal condition, time will not display)
5.Away management function
Under away management mode, the system will automatically record each calling's
picture.
7
Operation
Operation
B&W image memory operation
OSD menu operation
a.Under away management mode, if somebody calls in, the unit will automatically enter
into monitor mode, and record current picture. The users could open monitor mode,
”to review the
switch“ ”button to image memory mode, then press“
recorded picture.
2010.02.24
09:03
2010.02.27
09:45
2010.02.27
BRIGHTNESS
CONTRAST
COLOR
IMPACT
EXIT
50
50
50
MANUAL
COLOR SYS
LANGUAGE
VOLUME
RESET
EXIT
AUTO
ENGLISH
50
13:47
”button to image memory, then press“
”to
b.Under monitor mode, switch“
record one picture with time display. Max. to 32 or 64pcs. Over that, the system will
automatically cover the oldest picture.
2010.01.24
10:01
2010.01.24
10:02
2010.01.24
10:03
2010.01.24
10:04
”button to image memory, press“
”to choose
c.Under monitor mode, switch“
”to edit. Press“
”to finish edit
the time or date you need edit, then press“
and back to time setup mode.
Remark: Under power off condition, all of the recorded information would be lost.
Menu A
Menu B
Under OSD menu, you could adjust talk volume, contrast, color, language, etc.
”to OSD menu, press“
”or“
”to open
Turn on the screen, press“
”or“
”to choose the item you need adjust. After menu
menu A, then press“
”you can see menu B.
A's EXIT item, press“
1.Talk volume adjust
Under monitor or talk mode, the navigation button is default to OSD menu, now
”/“
”to adjust talk volume.
press“
2.Brightness, color, contrast adjust
”to choose Brightness,
Under OSD menu mode, turn on menu A, press“
”to increase,“
”to decrease.
Contrast and Color item, then press“
3.Picture impact
”to choose IMPACT item,
Under OSD menu mode, turn on menu A, press“
”/“
”to adjust between bright, soft, standard and manual.
then press“
4.Color system
”to choose COLOR SYS
Under OSD menu mode, turn on menu B, press“
”/“
”to adjust between AUTO, NTSC and PAL.
item, then press“
8
9
Specifications and accessories
Operation
5.OSD menu language
”to choose language, then
Under OSD menu mode, turn on menu B, press“
”/“
”to choose the language you need.
press“
26.5mm
126mm
”to choose RESET item, then
192.5mm
6.Picture quality reset
Under OSD menu mode, turn on menu B, press“
”/“
”to choose reset.
press“
Specifications
7.Exit OSD menu
”to choose EXIT item, then
Under OSD menu mode, turn on menu B, press“
”/“
”to exit. Or after 10s, the unit will automatically exit.
press“
Accessories
90mm
85mm
105mm
Screw:+P4×25TP1
Expansion plug:φ6×30mm
Bracket
Input:AC110~240V,50Hz/60Hz
Output:DC13.5V/1.5A
Power adaptor (option), without it when the unit is AC power.
10
11
Installation
Installation
6mm
1.Concealed wiring: fix the
bracket on the connection box.
Open wiring: drill 2 holes
(8.4cm distance), insert the
expansion plug to the hold, then
fix the bracket.
1.According to the diagram, connect the
wire to each connection terminal. Then
check if the wire is firm enough.
Peeling length:
Please install this unit near
the power socket. (distance
should be less than 1.2m.)
5.After connection, pack up the wire and insert to the connection box. Then hang up
the unit to the bracket. (after that, power on the unit and test.)
2.As the picture shows, peel the wire after pull out the wire from the wall. Peeling
length please refer to the picture.
12
13
Installation attention
1.When you choose the place to install the unit, please pay attention to:
Keep sufficient space for ventilation and easy communication.
Keep sufficient space to adjust while installing.
Not put hot resource under the unit.
The socket outlet shall be installed near the equipment and shall be easily
accessible.
2.Do not expose the unit to sunshine or rain:
Even if you do not use it, don't expose it to sunshine or rain.
3.Do not expose to intense light:
Spotlight may cause stain or striation in the screen.
Connection diagram
Wiring length and wire requirement
Wiring length
30M
50M
Wire requirement
from door camera
to the main monitor
RVV4*0.3mm2
RVV4*0.5mm
Wire requirement from
main monitor to subphone
100M
2
RVV4*0.75mm
2
RVV4*0.3mm2
Connection between monitor and camera (1-1)
4.Do not disassemble the unit by yourself:
Improper disassembly may damage the unit or cause electric shock.
5.Do not splash water on the unit:
Install the unit in dry place. In case that the unit gets wet, turn off the unit and
contact your dealer.
Electronic lock power
1
+ VCC
DC13.5V
- GND
2
AF 1
3
GND 1
4
VCC 1
5
VD 1
6
AF 2
7
GND 2
8
VCC 2
9
(Optional)
AF1
GND1
VCC 1
VD1
1
2
3
4
Outdoor camera
DOOR2
8.About operation:
Keep the unit away from magnetic equipments such as microwave oven or
big speaker. If the unit will not be used for a long time, please switch it off.
Outdoor camera
DOOR1
7.In case of trouble:
If any trouble occurs while you are using the unit, turn off the power and
contact your dealer to avoid worse problem or unpredictable accident.
E430C
POWER
6.Check the ambient temperature and humidity:
Avoid using the unit where the temperature is hotter or colder than specified,
otherwise the internal parts may get affected. Special care is required to use
the unit at high temperature and humidity.
Electronic
lock
Electronic
lock
Electronic lock power
VD 2
AF
EXTENSION
9.About clean:
Use soft cloth to clean the unit. Do not use any impregnant, such as alcohol,
benzene. If you have any problem, please contact your dealer.
GND
VCC
INT
Connection terminal on the back of unit
14
15
Connection diagram
Connection diagram
Connection between monitor and camera (1-2)
Connection between 1 monitor, 2 camera and 1 sub-phone KW-111
Electronic
lock
Electronic
lock
Outdoor camera 1
Outdoor camera 1
E430C
E430C
Electronic
lock
Electronic lock power
Outdoor camera 2
Electronic lock power
Electronic
lock
Outdoor camera 2
Electronic lock power
Electronic lock power
KW-111
3
(Optional)
AF1
1
2
VCC 1
5
VCC 1
3
VD 1
6
VD1
4
AF 2
7
8
VCC 2
9
VD 2
AF
VCC
INT
VCC2
3
VD2
4
Electronic
lock
Electronic lock power
Electronic lock
power
AF 1
3
GND 1
(Optional)
AF1
1
2
GND1
4
VCC 1
5
VCC 1
3
VD 1
6
VD1
4
AF 2
7
GND 2
8
VCC 2
9
AF2
VD 2
AF
EXTENSION
EXTENSION
GND
1
2
DOOR2
DOOR2
GND 2
AF2
GND2
Electronic
lock
2
GND
VCC
AF
GND2
1
2
VCC2
3
VD2
4
Outdoor camera 2
4
Outdoor camera 2
GND 1
DOOR1
DOOR1
GND1
1
+ VCC
DC13.5V
- GND
Electronic
lock
VCC
INT
Electronic
lock
Electronic lock
power
Electronic lock power
GND
INT
Outdoor camera 1
AF 1
POWER
2
Outdoor camera 1
POWER
1
+ VCC
DC13.5V
- GND
1
2
3
4
KW-111
Connection terminal on the back of unit
16
Connection terminal on the back of unit
17
Parameters
Troubles shooting guide
Problem
Possible reason
Solution
The unit don't work at all.
The unit hasn't connect
power supply.
The unit is under OFF
mode.
Check if the power is
connected well.
On the unit.
The connection between
outdoor and indoor unit
is cut off.
Main monitor is OFF.
Check the wiring
between outdoor
and indoor unit.
On the unit.
Talk volume is lower.
Adjust the talk volume
to best quality.
Outdoor camera cannot
call.
Outdoor can hear indoor,
but the voice which
indoor heard is lower.
18
Item
Number
E430C
E430C-W32
E430C-W64
Screen
4.3" color TFT
Power supply
AC100-240V 50Hz/60Hz 15W or DC13.5V / 1.5A
Sub-phone
connection
In series
Talk
Hands-free
Power
consumption
13.5V, 500mA(max) 13.5V, 500mA(max) 13.5V, 500mA(max)
Optional ring
Chord ring / Ding Dong
Operation
temperature
Optional
sub-phone
Optional
outdoor camera
-10℃ ~ +55℃
KW-111
All our 4-wires outdoor camera
19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement