Rainforest™ Mobile (TRU) - US

Rainforest™ Mobile (TRU) - US
K3799
L1346
Please
keepthis
thisinstruction
instruction sheet
sheet for
Please
keep
forfuture
futurereference,
reference,
containsimportant
important information.
asasit itcontains
information.
Requires
four
“D” “D”
(LR20)
alkaline
batteries
for the for
mobile
two “AA”
(LR6)
Requires
three
(LR20)
alkaline
batteries
the and
mobile
and two
alkaline
batteries
for the
(batteries
not included).
“AA” (LR6)
alkaline
batteries
forremote
the remote
(batteries
not included).
Adultassembly
assembly is
Adult
is required.
required.
Tool
requiredfor
forassembly:
assembly: Phillips screwdriver
Tool
required
screwdriver(not
(notincluded).
included).
™
www.fisher-price.com
Consumer Information
WARNING
• Possible entanglement injury. Keep out of baby’s reach.
• Remove mobile portion of product from crib or playpen
when baby begins to push up on hands and knees.
• This product will not attach to all crib designs. Do not add
additional strings or straps to attach to crib or playpen.
• The mobile portion of a product may be used from birth until 5 months.
• A crib mobile is intended for visual stimulation and is not to be grasped by a child.
• Always attach with all provided fasteners (clamp) tightly to a crib or playpen according to the
instructions. Check frequently.
2
Parts
Base
3 Soft Toys
Mobile Hub
Clamp
Remote
Arm
Crib Adaptor
3 Leaves
Note: All of the screws used to assemble this toy are located in the product.
Follow these instructions carefully to fully secure the screws.
Tighten and loosen all screws with a Phillips screwdriver. Do not overtighten.
3
Base Battery Installation
Battery Compartment
• Locate the battery compartment on the back of the base.
• Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the
battery compartment door.
Hint: If the crib adaptor is attached to the base, loosen the screws in the crib adaptor and remove it first.
• Insert three “D” (LR20) alkaline batteries, as indicated inside the battery compartment.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screws.
IMPORTANT! Under normal use conditions, the batteries in the base will require replacement
more often than the batteries in the remote. When sounds or light become faint or movement of
the mobile is sluggish, it’s time for an adult to replace the batteries in the base.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
4
K3799a-0920
PRINTED IN CHINA
Remote Battery Installation
Battery
Compartment
• Locate the battery compartment on the back of the remote.
• Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the
battery compartment door.
• Insert two “AA” (LR6) alkaline batteries, as indicated inside the battery compartment.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screw.
IMPORTANT! If the mobile does not respond to the remote, it does not mean that the battery
power in the remote is low. Replace the batteries in the remote if the LED signal indicator on the
remote is dim when the button is pressed. If the LED signal indicator does not light after installing
new batteries in the remote, check the orientation of the batteries in the battery compartment to
make sure they are properly installed.
• Protect the environment by not disposing of this product with household waste
(2002/96/EC). Check your local authority for recycling advice and facilities
(Europe only).
5
Battery Safety Information
1.5V x 2
“AA” (LR6)
1.5V x 3
“D” (LR20)
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted batteries from the
product. Dispose of batteries safely. Do not dispose of product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged under
adult supervision.
6
Assembly
Crib Adaptor
Base
1
• Fit the crib adaptor to the base.
• Tighten the four screws in the crib adaptor.
Arm
PRESS
SLIDE
Socket
Base
2
• First press the button next to the socket and then slide the socket door open .
• Fit the arm into the socket in the base.
• Tighten both screws in the arm.
7
Assembly
Mobile Hub
3
• Fit the mobile hub onto the end of the arm.
• Tighten both screws in the arm to secure the mobile hub.
Hint: You may want to attach the soft toys to the mobile hub before assembling the arm to the
mobile hub. Please refer to assembly step 5 for instructions to assemble the soft toys.
8
Assembly
4
Leaves
• “Snap” the leaves into the slots in the mobile hub.
5
Soft Toys
• Fit the soft toys to the pegs on the underside of the mobile hub.
• Tighten the screw in each toy to secure each to the mobile hub.
9
Crib Attachment
Crib Top Rail
Base
Clamp
• Fit the base onto the crib top rail, so that the threaded peg extends outside the crib.
• Fit the clamp onto the threaded peg and turn the clamp clockwise to secure the base to the crib.
• Do not over-tighten the clamp.
10
Crib Attachment
Mattress
At least 7 inches
Bottom of Base
• If the distance between the toy and the mattress is less than 7 inches (18 cm), lower the
crib mattress.
11
Use
Base Dome
• When using the remote, make sure that the arrow on the base’s dome is pointing towards
the transmitter window on the remote. For best results, make sure the path between the
transmitter window on the remote and the dome on the base are in a direct line and
free of obstacles. Rotate the base dome so that the arrow points to the area from which
you’re most likely to use the remote. For example, if you’ll most often be using the remote
from the doorway of the nursery, make sure that the arrow on the base dome is pointing
towards the doorway and that the path between the base dome and the doorway is free
from obstructions.
IMPORTANT!
• In the unlikely event that use of the remote interferes with normal use of other remote
controlled equipment, such as televisions and stereos, or use of other electric or battery
powered appliances interfere with operation of the mobile, do not use both appliances at
the same time.
• For best performance between the base and the remote, avoid using the remote in areas
of bright light. In bright natural or artificial light, you may notice loss of range. Move the
base or otherwise reduce the amount of light to improve performance.
12
Classical Music, Rainforest Sounds, Lights and Motion
Lights and Motion Select Switch
Lights and Music, Lights,
Music and Motion,
Motion and Music
Power/Volume Switch
Choose from three settings: off
;
on with low volume
or on with
higher volume
.
Music and Sound Select Buttons
Choose classical music from Bach,
Beethoven and Mozart or soothing
sounds of the Rainforest.
• Press the button on the remote to
activate music, lights and motion.
Press again to stop.
Note: The remote will remain active for
about one hour. When the LED goes out,
you will need to slide the power/volume
switch on the mobile off, then on again
to reactivate.
13
Convert to a Cribside Music Box
Remove the mobile and use as a music box with a night light!
• Loosen both screws in the arm near
the base.
• Lift and remove the arm with mobile
from the base.
• Close the small door on top of the base.
Store the mobile in a safe place for
future use.
14
Care
• Wipe this toy with a clean cloth dampened with a mild soap and water solution. Do not immerse
this toy.
• This toy has no consumer serviceable parts. Do not take this toy apart.
Consumer Information
Visit us on line at www.service.fisher-price.com
Call Fisher-Price Consumer Relations, toll-free at 1-800-432-5437, 9 AM – 7 PM Monday through
Friday and 11 AM – 5 PM Saturday. Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470. Write to us at: Fisher-Price® Consumer Relations, 636 Girard Avenue,
East Aurora, New York 14052.
®
15
FCC Statement
United States Only
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user's authority to operate the equipment.
For countries outside the United States:
CANADA Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; www.service.mattel.com.
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303; www.service.mattel.com/uk.
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory
Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement