Sport Climbing Timer Hengam3

Sport Climbing Timer Hengam3
S p o r t C l i m b i n g Ti m e r
Hengam3
User’s Manual
Ordered by KASSA
‫شرکت کوهنوردی کسا‬








An introduction to the device specifications
Parts
Technical details of back panel connectors
Connections and start-up
General functions
How to work with menus
Troubleshooting
Package contents
Spring 2012
Published by: Technical
Documentation Unit
Version 001; Edition 1.0
Www.fdpbco.com
Hengam3, User’s Manual
Dear User
Please read the Operation Instructions carefully before attempting to operate the
device.




Please protect this device and its accessories (Sensors, Display Screens, Start
Push Button, cables, Audio System, etc.) against moisture and water (such as
rain) especially when used outdoors. Exposure to water and moisture may
result in serious damages to the device or even electric shock.
Do your best to preserve and maintain the device in sport centers and avoid
from crushing the cables, beating, strikingand piercing with sharp objects and
also avoid replacing the connectors when connected to the device which is
turned on, and protect it against moisture, water and electricity voltage
fluctuation.
This product is made by Iranian engineers who have put in their utmost effort
to utilize state-of-the-art technology and highest quality materials so as to
optimize its performance. We warmly welcome any user’s feedback and
recommendations since we believe your comments will certainly help us
improve our products.
All design and manufacturing rights reserved by Fonoun Dadeh Parvari
Basamad (FDPB) Company, and all sales rights reserved by Kassa Company. If
device is opened or guarantee label removed the company may void warranty
system.
2
Hengam3, User’s Manual
An Introduction to the Specifications of Sport Climbing Timer
Due to the increasing in the demand of organizing better sport climbing
competitions and the necessity to estimate the competition time more precisely,
this device has been manufactured by the effort of Iranian experts to meet the
country’s need in this regard.More efforts have been done in manufacturing this
device which is the third and more developed generation of its previous versions to
optimize its functions using the state-of-the-art technology and highest quality
materials. The optimization progress involves mechanical to optical (laser) and
piezoelectric sensors, software algorithm, packing and mechanical parts, wiring
and connectors, display screens. The device has been designed and manufactured
with capability of operating in two modes of “Speed” and “Bouldering” for sport
climbing competitions.
3
Hengam3, User’s Manual
Parts
Front Panel View
1
Position
2
Name
1
LED Indicators:
Power indicator: Green
Speed indicator: Red
2
Character LCD Display Screen
Pushbuttons:
UP ,DOWN ,RIGHT, LEFT, OK,
START, CLEAR, MENU
3
Function
Power indicator turns on when the device
is on.
Speed indicator turns on when device
functions in "SPEED"mode.
Bouldering indicator turns on when device
functions in “BOULDERING”mode.
Blue light background – 2 x 16 Character
The buttons are used for changing the
settings, opening the menus, timing and
resetting
3
4
Hengam3, User’s Manual
Technical specifications
GENERAL DATA
Model:
Hengam 3 Sport Climbing System
Weight:
~ 2.5 kg
Power voltage:
85 to 260 voltage AC
47 to 60 Hz
Approximate Dimensions:
(Width*Height*Depth)
483*44*300 mm
Software Upgrade Possibility:
Yes
Working Temperature:
10 to 50 degree centigrade
5
Hengam3, User’s Manual
Parts
Back - Panel View
6
5
4
3
2
1
SPEAKER
7
Position
1
2
3
4
5
6
7
8
9
10
8
Name
GND
FUSE
ON/OFF KEY
RS-232
DISPLAY
START
STOP
STARTER
SPEAKER
220V-AC
9
10
Description
Ground Connection Screw
4 Ampere Glass Fuse
220 Volt Input Power Connector
Future Development Gate
3- Pin Male Connector to Displays
4-Pin Male Connector to Foot Sensors
4-Pin Male Connector to Hand Sensors
2-Pin Male Connector to Start Push Button
Headphone Jack to Audio System (Speaker /Amplifier)
Power Connector to 220 V Electricity
6
Hengam3, User’s Manual
Technical Guide for Back-Panel Connectors
1 : TX+(µ)≡RX+(Disp.)
4 : GND
3 : TX-(µ)≡RX-(Disp.)
1 : +VCC
2 : Foot1
3 : Foot2
2 : GND
4 : GND
1 : +VCC
2 : Hnd.1
3 : Hnd.2
1 : GND
2 : Key
7
Hengam3, User’s Manual
“Hengam 3” Block Diagram
3 pin
Hand Sensor (Stop) 2
4 pin
Hand Sensor (Stop) 1
12VDC/2pin
Data/3pin
Display 2
Display 1
Climbing Wall
3 pin
Foot Sensor(Start)2
2 pin
Foot Sensor(Start)1
4 pin
Starter(Push Button)
Data/3pin
Speaker
Main-Hengam3
Long Cable
110-220 v ~
Www.fdpbco.com
2 pin
12V Power Supply
8
Hengam3, User’s Manual
General Function
This device has been designed and manufactured for two modes of “Speed” and
“Bouldering” in sport climbing competitions. The functions of this device in these
two modes are explained below.
A. Speed Mode:
A starter asks the climber to stand by the route at start-point and should say “AT
YOUR MARKS” and then“Ready” (as mentioned in the IFSC Rules). Then the
climber should hold one foot on foot sensor (Start Panel). By the time the referee
pushes the start button a signal is sounded by Speaker for 0.2 second and
simultaneously the timing system will be activated. A time sample is recorded from
foot sensors when the start key is pushed by the referee for 0.1 second thereafter.
In case foot loses contact with sensor within the said time, False Start is displayed.
False Start is indicated by a blinking sign of “Err” on Display and is also
accompanied by a beeping sound from the Speaker. To stop the False Start you just
need to push and hold the Clear/Menu button for 4 seconds.
In case False Start does not occur, the System continues timing. When the athlete
touches the colorful part on the Stop Panel with hand, the timing system stops and
the whole LED indicators on the panel light up. The time is recorded and will also
remain on Display and LED of the main device (Unless the Clear/Menu key on the
front panel is pushed and held for 4 seconds to reset the counter).
B. Bouldering Mode:
In bouldering mode, the foot and hand sensors are not used. After setting the trial
time on the main unit routes and after pressing the OK/START button, the Audio
System sounds the starting signal for five seconds and the timer starts to count
down the defined time. The speaker sounds a beeping signal by the time there is
only one minute left. When the time is finished the five second sound of Start is
heard again which indicates the ending/start time.
9
Hengam3, User’s Manual
Displaying the False Start Message
In case any of the competitors commit a False Start, the Error message is shown on
the corresponding display and the alarm sound (beeping sound with half second
intervals) is heard.
Fig. 4: Route 1 competitor’s error
Fig. 5: Route 2 competitor’s error
Fig. 6: Both routes competitors’ error
To (Reset) the device in case of errors, just push and hold the Clear/Menu button
for 4 seconds.
CLEAR/MENU
4 sec.
Fig. 7: Holding “Clear” Button to reset
10
Hengam3, User’s Manual
Working with Menus
Using the device is easy and the user can work with it just by two Clear/Menu and
OK/Start main buttons and four directional buttons.
OK/START
CLEAR/MENU
Fig.1
After the device is turned on, the device name and Company’ greetings message are displayed.
Fig.2
1- Speed Mode
Speed Mode is set by default when the device is turned on (After the corresponding
LED displays on the front panel are turned on). After the athlete’s foot is suitably
put on the foot sensors and after being sure that foot sensor green light is on, the
timing can be started by pushing the Start Push Button or the OK/Start button. The
timing is started with a 0.2 second sound signal. When any of the corresponding
two athletes manually touch the sensors at the top of the wall, the recorded time is
indicated on the front panel and the route display.
Pushing the “OK/Start”
button or “Push Button”
Fig.3
11
Hengam3, User’s Manual
Bouldering Mode
Speed Mode is set by default when the device is turned on. Then the following
message appears after pushing Clear/Menu button once (Left picture).
OK / START
Fig. 8
Now you just need to push
OK/Start button once to
change the device mode to Bouldering. The mode change is indicated on the
Now, the device is set on bouldering mode and if you
push OK/Start button the countdown timing is started
for both routes and simultaneously a sound is signaled
for 5 seconds that indicates timing is started.
OK / START
The default time for bouldering countdown is set to 2
minutes which can be changed in the device menu
from 2 to 8 minutes by one-minute steps.
Fig. 9
By the following keys combinations you can activate only one route if needed.
Key Equivalent
Right
(Start)
Left
(Start)
Combination Equivalent
Up
(Reset)
Down
(Reset)
Route activation
Route 1
Route 2
12
Hengam3, User’s Manual
Bouldering Mode (Continued...)
Timing for both routes by pushing the OK/Start button is possible:
OK / START
Fig. 10
(Reset)ting the time of both routes by pushing the Clear/Menu button:
CLEAR/MENU
4 sec.
Fig. 11
Timing of route 1 by pushing the Right button:
RIGHT
Fig. 12
Time (Reset)ting for route 1 by pushing the Up button:
UP
4 sec.
Fig. 13
13
Hengam3, User’s Manual
Bouldering Mode (Continued...)
Timing of route 2 by pushing the Left button:
LEFT
Fig. 14
Time resetting for route 2 by pushing the Down button:
DOWN
4 sec.
Fig. 15

In bouldering Mode, whenever there is one minute left, the Speaker sounds an
alternative five-second sound while the counter indicates the time counting
down. After reaching to zero, the time is then reset to the default time of two
minutes automatically.

You can reset the counter while countdown continued in bouldering mode by
pushing and holding the Clear/Menu button for 4 seconds.
14
Hengam3, User’s Manual
Menu for Setting the Bouldering Period
When counter is not counting, you can reach “changing bouldering time” by
pressing “Clear/Menu” and the button Down.
MENU
DOWN x 2
MENU
DOWN
Bouldering Mode
Speed Mode
8 min
UP/DOWN
2 min
OK
UP/DOWN
Fig. 16
15
Hengam3, User’s Manual
Light Level Menu
To use the device more conveniently indoors and outdoors, a Light Level setting has
been implemented in displays. When the counter is not counting, push Clear/Menu
and UP buttons to access LED displays Light Level menu.
RIGHT
MENU
UP
MENU
UP x2
Bouldering Mode
Speed Mode
LEFT
OK
Speed Mode
DOWN
OK
OK
Bouldering Mode
Fig. 17
The light level is saved in device memory after being set so that the light level will
be saved after power loss.
16
Hengam3, User’s Manual
Changing the Device Modes (Speed/Bouldering)
Using the Menu, Up, Down and OK buttons you can easily change the modes
(Speed/Bouldering).
Speed Mode
Bouldering Mode
MENU
MENU
MENU
MENU
Speed Mode
Bouldering Mode
Fig. 18
17
Hengam3, User’s Manual
TROUBLESHOOTING
Problem
Solution
Device does not turn on
Make sure power flows throughthe mains
Check the power supply cable for possible damages
Check the existence and functionality of fuse at the device backside
Check if the main power button is “ON”
Displays don’t turn on
Check the main power supply cable (Display 1)
Check the power supply connector (Display 2)
Sensors don’t turn on
Check the connector to the main unit (4 pin) (Sensor 1)
Check the connector between sensor 1 to 2
False Start message
Check the functionality of sensors by putting a foot on them
Check the connecting cables of foot sensors
18
Hengam3, User’s Manual
Accessories & Package Contents:
No.
Item
Quantity
Description
1
Hengam3 Speed Timer Device (Main Unit)
1
(Including the LCD and button panels)
2
Start Push Button
1
Together with the corresponding two-strip cable
3
Stop Panel (Hand sensor)
2
Stop Panel (Activated by hand)
4
Connector of hand sensor 1 to main unit
1
Four-strip cable –25 meters
5
Connector of hand sensor 1 to 2
1
Three-strip cable
6
Start Panel (Foot sensor)
2
7
Connector of foot sensor 1 (Start Panel) to main unit
1
Four-strip cable – 15 meters
8
Connector of foot sensor 1 to 2
1
Three-strip cable
9
LED Digital display
2
Together with power cable
10
Data connector of display 1 to main unit
1
Four-strip cable – 15 meters
11
Power Supply connector of display 1 to 2
1
Four-strip cable – 15 meters
12
Data Connector of display 1 to 2
1
Three-strip cable
13
Speaker system
1
Two speakers with amplifiers
14
Manual of the Device (The present booklet)
1
15
220 V Inlet Power Cable of the Device
1
19
Hengam3, User’s Manual
Maintenance Instructions
The following instructions will ensure longer life for your Sport Climbing Timer:

Keep the device away from moisture. As mentioned earlier, moisture can
cause irreparable damage to the device. If it is to be used in open air, cover the
device against rain with equipment such as sunshades.

Avoid hitting the sensors (Start and Stop Panels).

In rehearsals, you can remove Displays and Start Push Button, and instead use
the screen and buttons on the main device front panel. This will help your
device achieve a longer life.

When the device is working on Bouldering modes, removing Start and Stop
Panels(Sensors) is recommended.

For longer lifetime of rubber foams on Start and Stop Panels, keep away the
panels from direct sun light if possible.

Cables are made of materials with high resistance and quality. However, avoid
stretching, crushing or stepping on the cables as that may cause
disconnection, signal loss and thus malfunctions in the system. Please put in
your utmost care and attention for the maintenance of cables especially their
plugs and connectors.
20
Hengam3, User’s Manual
Guarantee Terms

All parts of Sport Climbing Timer are covered by guarantee services for a
one year period from product delivery date. All parts will be repaired for
free during guarantee period.

By the termination of Guarantee Period, users will be charged against
repairs.

Guarantee Policy does not include severe strikes or fire damages.

Guarantee will be voided if device or any of its parts opened or guarantee
label removed.
21
Hengam3, User’s Manual
Sport Climbing Timer– Hengam 3
The Device Check-up Form in Speed Competitions
Competition Number:
Number of Competitors:
Competition Start Time:
Stop Panel
(Hand
Sensor)
Competition End Time:
Right
Left
Start Panel
(Foot
Sensor)
Right
Left
Date:
Place:
Display
Right
Start
Push
Button
Speaker
Left
Number of Correct Acts
(OK)
Number of Incorrect Acts
(Fail)
Remarks:
User:
Signature:
22
Hengam3, User’s Manual
“Hengam 3” Block Diagram
3 pin
Hand Sensor (Stop) 2
4 pin
Hand Sensor (Stop) 1
12VDC/2pin
Data/3pin
Display 2
Display 1
Climbing Wall
3 pin
Foot Sensor(Start)2
Foot Sensor(Start)1
2 pin
4 pin
Starter(Push Button)
Data/3pin
Speaker
Main Unit-Hengam3
220 long Cable
220 v ~
Www.fdpbco.com
2 pin
12V Power Supply
23
Hengam3, User’s Manual
KASSA Mountaineering Co. Ltd.
www.kassa.ir
Unit2, No.27, Razi Complex, Naghdi Alley , Shariati St., Tehran 15637 I.R.IRAN
Tel : +9821 77510463 -4 , Fax : +9821 77622043
FDPB
Fonoun Dadeh Parvari Basamad Ltd.
www.fdpbco.com
Address: Unit 3 No. 2, Sarv Alley,Tohid Avenue, Tohid Sq., Tehran
Tel: (+9821) 66572534 Fax: (+9821) 66934265
Documentation: [email protected]
24
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement