USER`S MANUAL - Green Fit Co.
www.proform.com
Model No. PFTL16011.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if parts
are damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.proformservice.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
USER’S MANUAL
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
THE CHEST HEART RATE MONITOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
EXERCISE GUIDELINES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
WARNING DECAL PLACEMENT
This drawing shows the locations of the
warning decals. If a decal is missing or
illegible, call the telephone number on the
front cover of this manual and request a
free replacement decal. Apply the decal in
the location shown. Note: The decals may
not be shown at actual size.
One decal is located at
the front of the treadmill.
310841
PROFORM is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your treadmill before using your treadmill. ICON
assumes no responsibility for personal injury or property damage sustained by or through the use of
this product.
1. B
efore beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or persons
with pre-existing health problems.
other electrical devices, except for low-power
devices such as cell phone chargers, into
the surge suppressor or into an outlet on the
same circuit.
2. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
12.Use only a surge suppressor that meets all of
the specifications described on page 16. To
purchase a surge suppressor, see your local
PROFORM dealer, call the telephone number
on the front cover of this manual, or see your
local electronics store.
3. Use the treadmill only as described.
4. K
eep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
13.Failure to use a properly functioning surge
suppressor could result in damage to the
control system of the treadmill. If the control
system is damaged, the walking belt may
slow, accelerate, or stop unexpectedly, which
may result in a fall and serious injury.
5. P
lace the treadmill on a level surface, with
at least 8 ft. (2.4 m) of clearance behind it
and 2 ft. (0.6 m) on each side. Do not place
the treadmill on any surface that blocks air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.
14.Keep the power cord and the surge suppressor away from heated surfaces.
6. D
o not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
15.Never move the walking belt while the power
is turned off. Do not operate the treadmill
if the power cord or plug is damaged, or if
the treadmill is not working properly. (See
TROUBLESHOOTING on page 30 if the treadmill is not working properly.)
7. K
eep children under age 12 and pets away
from the treadmill at all times.
8. T
he treadmill should be used only by persons weighing 350 lbs. (159 kg) or less.
16.Read, understand, and test the emergency
stop procedure before using the treadmill
(see HOW TO TURN ON THE POWER on page
18).
9. N
ever allow more than one person on the
treadmill at a time.
17.Never start the treadmill while you are standing on the walking belt. Always hold the
handrails while using the treadmill.
10.Wear appropriate exercise clothes while
using the treadmill. Do not wear loose
clothes that could become caught in the
treadmill. Athletic support clothes are recommended for both men and women. Always
wear athletic shoes. Never use the treadmill
with bare feet, wearing only stockings, or in
sandals.
18.The treadmill is capable of high speeds.
Adjust the speed in small increments to
avoid sudden jumps in speed.
19.The heart rate monitor is not a medical
device. Various factors, including the user’s
movement, may affect the accuracy of heart
rate readings. The heart rate monitor is
intended only as an exercise aid in determining heart rate trends in general.
11.Plug the power cord into a surge suppressor
(not included), and plug the surge suppressor into an appropriate outlet (see page 16).
To avoid overloading the circuit, do not plug
3
DANGER:
20.Never leave the treadmill unattended while
it is running. Always remove the key, unplug
the power cord, and press the power switch
into the off position when the treadmill is not
in use. (See the drawing on page 5 for the
location of the power switch.)
25.
Always unplug the power
cord immediately after use, before cleaning the treadmill, and before performing the
maintenance and adjustment procedures
described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service representative only.
21.Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 7, and HOW TO FOLD
AND MOVE THE TREADMILL on page 29.)
You must be able to safely lift 45 lbs. (20 kg)
to raise, lower, or move the treadmill.
26.This treadmill is intended for home use only.
Do not use this treadmill in a commercial,
rental, or institutional setting.
22.When folding or moving the treadmill, make
sure that the storage latch is holding the
frame securely in the storage position.
27.Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
23.Never insert any object into any opening on
the treadmill.
24.Inspect and properly tighten all parts of the
treadmill regularly.
SAVE THESE INSTRUCTIONS
4
BEFORE YOU BEGIN
Thank you for selecting the revolutionary
PROFORM® PRO 4500 treadmill. The PRO 4500
treadmill offers an impressive selection of features
designed to make your workouts at home more enjoyable and effective. And when you’re not exercising, the
unique treadmill can be folded up, requiring less than
half the floor space of other treadmills.
reading this manual, please see the front cover of this
manual. To help us assist you, please note the product
model number and serial number before contacting us.
The model number and the location of the serial number decal are shown on the front cover of this manual.
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after
Length: 6 ft. 8 in. (203 cm)
Width: 3 ft. (91 cm)
Console
Handrail
Heart Rate
Monitor
Tray
Upright
Key/Clip
Power Switch
Walking Belt
Foot Rail
Power Cord
Platform Cushion
Idler Roller
Adjustment Screws
5
PART IDENTIFICATION CHART
Use the drawings below to identify small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key
number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached. Extra hardware may be included.
#10 Star
Washer (11)–4
#8 x 1/2" Screw
(1)–6
3/8" x 1 1/4"
Screw (9)–4
3/8" Star
Washer (14)–4
#8 x 1/2" Ground
Screw (10)–1
3/8" Nut (13)–2
#8 x 3/4" Screw
(2)–12
3/8" x 1 3/4" Bolt (7)–1
#10 x 3/4" Screw
(3)–4
3/8" x 2" Bolt (5)–1
3/8" x 2 3/4" Screw (8)–4
5/16" x 5/8" Bolt
(4)–4
3/8" x 1" Bolt
(6)–4
5/16" Star
Washer (12)–4
6
3/8" x 1" Flat
Head Bolt (15)–4
ASSEMBLY
• T
o hire a service technician to assemble this
product in your home, call 1-800-445-2480.
• To identify small parts, see page 6.
• Assembly requires the following tools: • Assembly requires two persons.
the included hex key
one adjustable wrench
• P
lace all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish all assembly steps.
one Phillips screwdriver
• T
he underside of the walking belt is coated with
high-performance lubricant. After shipping, there
may be some lubricant on top of the walking belt
or on the shipping carton. This is normal. If there
is lubricant on top of the walking belt, wipe it off
with a soft cloth and a mild, non-abrasive cleaner.
To avoid damaging parts, do not use power tools.
1.
Make sure that the power cord is unplugged.
1
Attach the Left Wheel Cap (103) to the Base
(105) with two #8 x 3/4" Screws (2).
Attach the Right Wheel Cap (not shown) to
the right side of the Base (105) in the same
way.
105
2
103
7
2.Pull the Upright Wire (88) and the base ground
wire (A) through the indicated hole in the Base
(105).
2
Attach the base ground wire (A) to the Base
(105) with a #8 x 1/2" Ground Screw (10).
Press the Grommet (101) into the square hole in
the Base (105).
Hole
101
88
10
3.Identify the Left Upright (90), which is marked
“Left.” Have a second person hold the Left
Upright near the Base (105).
3
A
88
105
90
See the inset drawing. Tie the wire tie in the
Left Upright (90) securely around the end of the
Upright Wire (88). Then, pull the other end of the
wire tie until the Upright Wire is routed through
the Left Upright.
Wire
Tie
Wire
Tie
90
88
8
105
88
4.Hold the Left Upright (90) against the Base
(105). Be careful not to pinch the wires. If
necessary, position the base ground wire (A)
in the hole in the side of the Left Upright. Insert
two 3/8" x 2 3/4" Screws (8) and two 3/8" x
1 1/4" Screws (9) with two 3/8" Star Washers
(14) into the Left Upright.
4
Partially tighten the 3/8" x 2 3/4" Screws (8) and
the 3/8" x 1 1/4" Screws (9) until the heads of the
Screws touch the Left Upright (90); do not fully
tighten the Screws yet. Note: It may be helpful to use the Short Hex Key (43) on the Screw
shown.
90
8
Attach the Right Upright (not shown) in the
same way. Note: There are no wires on the right
side.
43
Hole
14
A
9
5.Identify the Left and Right Base Covers (96, 97).
14
105
5
Slide the Left Base Cover (96) onto the Left
Upright (90). Slide the Right Base Cover (97)
onto the Right Upright (99). Do not press the
Base Covers into place yet.
99
90
96
9
97
6.Remove the four 3/8" x 1" Screws (6) and
four 3/8" Star Washers (14) from the Handrail
Brackets (89). Then, remove the Handrail
Brackets from the Left and Right Handrails (92,
93). The Screws and Star Washers will be
used in step 8.
6
6
14
89
6
14
6
14
93
89
6
14
92
7.Remove the four 3/8" x 1" Flat Head Screws (15)
and four 3/8" Star Washers (14) from the Left
and Right Uprights (90, 99).
7
Hole
15
89
Orient the Handrail Brackets (89) so that the
indicated holes are in the positions shown.
Insert the Upright Wire (88) through the left
Handrail Bracket.
14
88
Attach the Handrail Brackets (89) to the Uprights
(90, 99) with the four 3/8" x 1" Flat Head Screws
(15) and four 3/8" Star Washers (14) that you
just removed. Tighten the Screws.
Hole
15
14
99
89
90
8.Identify the Left and Right Handrails (92, 93).
8
93
Hold the Left Handrail (92) near the Left Upright
(90). Insert the Upright Wire (88) into the large
hole in the bottom of the Left Handrail and out of
the front of the Left Handrail.
89
14
6
Slide the Left Handrail (92) onto the left Handrail
Bracket (89), and attach the Left Handrail with
two of the 3/8" x 1" Screws (6) and 3/8" Star
Washers (14) that you removed in step 6. Do
not tighten the Screws yet.
92
88
14
6
14
Attach the Right Handrail (93) as described
above. Note: There is not a wire in the Right
Upright (99).
6
99
89
14
90
10
6
9.Remove and discard the #10 x 3/4" Screws
(3) from the Right Handrail (93) and the Left
Handrail (not shown).
9
93
Pulse Wire
Hold the pulse assembly near the Right Handrail
(93). Insert the pulse wire from the pulse assembly into the hole in the side of the Right Handrail
and out of the end of the Right Handrail as
shown.
3
Pulse
Assembly
Hole
10.Slide the pulse assembly onto the Left and Right
Handrails (92, 93). Make sure that the brackets on the pulse assembly are flush against
the rubber on the Handrails. Be careful not to
pinch the pulse wire against the pulse
assembly.
10
Attach the pulse assembly with four #10 x 3/4"
Screws (3) and four #10 Star Washers (11).
Start all four Screws, and then tighten them.
11.Set the console assembly face down on a soft
surface to avoid scratching the console
assembly.
92
3
11
Pulse
Assembly
11
3
11
1
1
Identify the Left and Right Trays (110, 111).
Attach the Trays (110, 111) to the console
assembly with six #8 x 1/2" Screws (1). Start all
six Screws, and then tighten them. Be careful
not to overtighten the Screws.
93
Pulse Wire
4
12
1
110
1
111
4
12
emove the four 5/16" x 5/8" Screws (4) and
R
four 5/16" Star Washers (12) from the console
assembly. They will be used in step 13.
Console
Assembly
11
12.With the help of a second person, hold the console assembly near the Uprights (90, 99).
12
Console
Assembly
Connect the Upright Wire (88) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
88
Pulse Wires
Next, connect the two pulse wires. Then, remove
the wire tie from the Upright Wire (88).
Pulse Bar
Assembly
99
Wire
Tie
Console
Wire
90
Console
Wire
88
13.Insert the pulse wires and the Upright Wire (not
shown) into the Handrails (92, 93) as you set the
console assembly on the Handrails.
13
Attach the console assembly with four 5/16" x
5/8" Screws (4) and four 5/16" Star Washers
(12). Start all four Screws, and then tighten
them.
92
93
Tighten the four 3/8" x 1" Screws (6).
12
4
12
6
Console
Assembly
12
4
6
14.Attach a Tray Bracket (91) to the side of the
Right Upright (99) with two #8 x 3/4" Screws (2).
Make sure to use the two holes shown. Start
both Screws, and then tighten them.
14
ttach the other Tray Bracket (not shown) to
A
the Left Upright (not shown) in the same way.
87
91
Attach the Tray (87) to the Tray Brackets (91)
with four #8 x 3/4" Screws (2) (only one side
is shown). Start all four Screws, and then
tighten them.
2
99
15.Tighten the four 3/8" x 2 3/4" Screws (8), and
then tighten the four 3/8" x 1 1/4" Screws (9)
(only one side is shown).
15
97
Press the Left and Right Base Covers (96, 97)
onto the Base (105) until they snap into place.
96
8
9
105
16.Raise the Frame (64) to the position shown.
Have a second person hold the Frame until
this step is completed.
16
64
Orient the Storage Latch (65) so that the large
barrel and the latch knob are in the positions
shown.
Attach the lower end of the Storage Latch (65) to
the Base (105) with a 3/8" x 2" Bolt (5) and a 3/8"
Nut (13).
105 13
Latch
Knob
13
5
65
Large
Barrel
17.Attach the upper end of the Storage Latch (65)
to the Frame (64) with a 3/8" x 1 3/4" Bolt (7)
and a 3/8" Nut (13).
17
64
13
7
65
18.Lower the Frame (64) (see HOW TO LOWER
THE TREADMILL FOR USE on page 29).
18
If one of the Rear Leveling Feet (69) doesn’t sit
flat on the floor, turn the Rear Leveling Foot until
it does, and then tighten the 1/2" Rear Leveling
Foot Nut (41) against the Frame (64). Make sure
that both 1/2" Rear Leveling Foot Nuts are tightened against the Frame.
64
69
41
19.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is
used to adjust the walking belt (see pages 31 and 32).
14
THE CHEST HEART RATE MONITOR
HOW TO PUT ON THE HEART RATE MONITOR
The heart rate
monitor consists of
a chest strap and a
sensor. Insert the
tab on one end of
the chest strap into
the hole in one end
of the sensor as
shown. Then, press
the end of the sensor under the buckle
on the chest strap.
The tab should be
flush with the front of
the sensor.
Tabs
• Do not expose the heart rate monitor to direct
sunlight for extended periods of time; do not expose
it to temperatures above 122° F (50° C) or below 14°
F (-10° C).
Chest
Strap
• Do not excessively bend or stretch the sensor when
using or storing the heart rate monitor.
• To clean the sensor, use a damp cloth and a small
amount of mild soap. Then, wipe the sensor with a
damp cloth and thoroughly dry it with a soft towel.
Never use alcohol, abrasives, or chemicals to clean
the sensor. Hand wash and air dry the chest strap.
Sensor
Tab
TROUBLESHOOTING
If the heart rate monitor does not function properly, try
the steps below.
Sensor Buckle
The heart rate monitor must be worn
under your clothes,
tight against your
skin. Wrap the heart
rate monitor around
your chest in the
location shown.
Make sure that
the logo is rightside-up. Then, attach the other end of the chest strap
to the sensor. Adjust the length of the chest strap, if
necessary.
• Make sure that you are wearing the heart rate monitor as described at the left. If the heart rate monitor
does not function when positioned as described,
move it slightly lower or higher on your chest.
• If heart rate readings are not displayed until you
begin perspiring, rewet the electrode areas.
• For the console to display heart rate readings, you
must be within arm’s length of the console.
• If there is a battery cover on the back of the sensor,
replace the battery with a new battery of the same
type.
Pull the sensor away from your body a few inches and
locate the two electrode areas, which are covered by
shallow ridges. Using saline solution such as saliva or
contact lens solution, wet the electrode areas. Then,
return the sensor to a position against your chest.
• The heart rate monitor is designed to work with
people who have normal heart rhythms. Heart rate
reading problems may be caused by medical
conditions such as premature ventricular contractions (pvcs), tachycardia bursts, and arrhythmia.
CARE AND MAINTENANCE
• Thoroughly dry the sensor with a soft towel after
each use. Moisture may keep the sensor activated,
shortening the life of the battery.
• The operation of the heart rate monitor can be
affected by magnetic interference from high power
lines or other sources. If you suspect that magnetic
interference is causing a problem, try relocating the
fitness equipment.
• Store the heart rate monitor in a warm, dry place.
Do not store the heart rate monitor in a plastic bag or
other container that may trap moisture.
15
OPERATION AND ADJUSTMENT
HOW TO CONNECT THE POWER CORD
nominal 120-volt circuit capable of carrying 15 or
more amps. To avoid overloading the circuit, do
not plug other electrical devices, except for lowpower devices such as cell phone chargers, into
the surge suppressor or into an outlet on the same
circuit. IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets and may not be
compatible with AFCI-equipped outlets.
Use a Surge Suppressor
Your treadmill, like other electronic equipment, can be
damaged by sudden voltage changes in your home’s
power. Voltage surges, spikes, and noise interference can result from weather conditions or from other
appliances being turned on or off. To decrease the
risk of damaging the treadmill, always use a surge
suppressor with the treadmill. To purchase a surge
suppressor, see precaution 12 on page 3.
1
Grounded Outlet
Grounding Pin
Use only a surge suppressor that is UL 1449 listed as a
transient voltage surge suppressor (TVSS). The surge
suppressor must have a UL suppressed voltage rating
of 400 volts or less and a minimum surge dissipation of
450 joules. The surge suppressor must also be electrically rated for 120 volts AC and 15 amps. There must
be a monitoring light on the surge suppressor to indicate whether it is functioning properly. Failure to use a
properly functioning surge suppressor could result
in damage to the control system of the treadmill
and serious injury to users.
Grounding Pin
Surge
Suppressor
Plug in the Power Cord
A temporary
adapter may
be used to
connect the
surge suppressor to
a 2-pole
receptacle
if a properly
grounded
outlet is not
available.
The treadmill must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. The treadmill power cord has a plug with a
grounding pin (see drawing 1 on this page).
DANGER: Improper connection
of the power cord increases the risk of electric shock. Do not modify the plug—if it will
not fit an outlet, have a proper outlet installed
by a qualified electrician. If you are unsure
whether the treadmill is properly grounded,
contact a qualified electrician.
2
2-pole Receptacle
Adapter
Lug
Metal
Screw
The lug or wire extending from the adapter must
be connected with a metal screw to a permanent
ground such as a properly grounded outlet box cover.
Some 2-pole receptacle outlet box covers are not
grounded. Before using an adapter, contact a qualified electrician to determine whether the outlet box
cover is grounded. The temporary adapter should
be used only until a properly grounded outlet can
be installed by a qualified electrician.
Plug the power cord into a surge suppressor, and plug
the surge suppressor into an appropriate outlet that is
properly installed and grounded in accordance with all
local codes and ordinances. The outlet must be on a
16
CONSOLE DIAGRAM
FEATURES OF THE CONSOLE
As you exercise, the console will display instant exercise feedback. You can also measure your heart rate
using the handgrip heart rate monitor or the chest heart
rate monitor.
The treadmill console offers an impressive array of
features designed to make your workouts more effective and enjoyable. The console features revolutionary
iFit Live technology that enables the treadmill to communicate with your wireless network. With iFit Live
technology, you can download personalized workouts,
create your own workouts, track your workout results,
and access many other features. See www.iFit.com
for complete information.
You can even browse the Internet or listen to your
favorite workout music or audio books with the console’s stereo sound system while you exercise.
To turn on the power, see page 18. To learn how to
use the touch screen, see page 18. To set up the
console, see page 19.
In addition, the console features a selection of onboard
workouts, including at least seven calorie workouts,
seven intensity workouts, seven speed workouts,
seven incline workouts, and six iFit Live demo workouts. Each workout automatically controls the speed
and incline of the treadmill as it guides you through an
effective exercise session. In addition, you can set a
calorie, time, distance, or pace goal.
Note: The console can display speed and distance in
either miles or kilometers. To find which unit of measurement is selected, see step 4 on page 25. For
simplicity, all instructions in this section refer to miles.
When you use the manual mode, you can change the
speed and incline of the treadmill with the touch of a
button.
ETPF16011
(PFTL16011)
17
HOW TO TURN ON THE POWER
HOW TO USE THE TOUCH SCREEN
IMPORTANT: If the treadmill has been exposed to
cold temperatures, allow it to warm to room temperature before you turn on the power. If you do
not do this, you may damage the console displays
or other electrical components.
The console features a tablet with a full-color touch
screen. The following information will help you become
familiar with the tablet’s advanced technology:
lug in the power cord (see
P
page 16). Next, locate the
power switch on the treadmill
frame near the power cord.
Make sure that the switch is
in the reset position.
• The console functions similarly to other tablets.
You can slide or flick your finger against the screen
to move certain images on the screen, such as
the displays in a workout (see step 5 on page 20).
However, you cannot zoom in and out by sliding your
fingers on the screen.
Reset
• The screen is not pressure sensitive. You do not
need to press hard on the screen.
IMPORTANT: The console features a display demo
mode, designed to be used if the treadmill is displayed in a store. If the demo mode is turned on,
the displays will show a preset presentation after
you plug in the power cord and press the power
switch into the reset position, before you insert the
key. To turn off the demo mode, see step 5 on page
25.
• To type information into a text box, touch the text box
to view the keyboard. To use numbers or other characters on the keyboard, touch the ?123 button. To
view more characters, touch the Alt button. Touch the
Alt button again to return to the number keyboard. To
return to the letter keyboard, touch the ABC button.
To use a capital character, touch the button with an
upward-facing arrow. To use multiple capital characters, touch the arrow button again. To return to the
lowercase keyboard, touch the arrow button a third
time. To clear the last character, touch the button
with a backward-facing arrow and an X.
Next, stand on the foot
rails of the treadmill.
Locate the clip attached
to the key, and slide
the clip securely onto
Key
the waistband of your
Clip
clothes. Then, insert the
key into the console.
After several seconds,
the displays will light. IMPORTANT: In an emergency,
the key can be pulled from the console, causing
the walking belt to slow to a stop. Test the clip by
carefully taking a few steps backward; if the key is
not pulled from the console, adjust the position of
the clip.
• Use the buttons on the
console shown to navigate the tablet. Press the
Back button to return
to the previous screen.
Press the Home button to
ETPF16011
return to the main menu.
(PFTL16011)
Note: The center button
does not function.
ote: It may take a minute for the console to be
N
ready for use.
18
Back
Home
HOW TO SET UP THE CONSOLE
Next, enter a username and password and your
e-mail address. Enter the activation code from the
iFit Live flier that came with the treadmill. Touch
the Place of Purchase drop-down menu for a list of
options; then, touch the location where you purchased your product. Touch the words MEDICAL
DISCLAIMER, read the medical disclaimer,
touch the I Accept button, and check the medical disclaimer checkbox. Then, touch the Confirm
Activation Code button.
Before using the treadmill for the first time, set up the
console.
1. Connect to your wireless network.
Note: In order to access the Internet, download iFit
Live workouts, and use other features of the console, you must be connected to a wireless network.
See HOW TO USE THE WIRELESS NETWORK
MODE on page 27 to connect the console to your
wireless network.
2. Check for firmware updates.
Enter the requested personal information. When
you have entered all of the information, touch the
Finish button. Then, touch the Home button on the
console to exit the browser.
First, see step 1 on page 25 and step 2 on page 26
and select the maintenance mode. Then, see step
3 on page 26 and check for firmware updates.
The console is now ready for you to begin working out.
The following pages explain the various workouts and
other features that the console offers.
3. Calibrate the incline system.
See step 4 on page 26 and calibrate the incline
system of the treadmill (unless you already did so
during assembly).
To use the manual mode, see page 20. To use an
onboard workout, see page 22. To use a set-a-goal
workout, see page 23. To use an iFit Live workout,
see page 24.
To use the equipment settings mode, see page 25.
To use the maintenance mode, see page 26. To use
the wireless network mode, see page 27. To use
the stereo sound system, see page 28. To use the
cool-down mode, see page 28. To use the Internet
browser, see page 28.
4. Create an iFit Live account.
Touch the globe button near the lower-left corner of
the screen and touch the iFit Live button.
Note: For information about navigating in the
browser, see page 28. The browser will open to the
iFit.com home page. Touch the Register button in
the upper-right corner of the screen.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The first time you use
the treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 32).
The browser will open to the iFit.com registration
page. Touch an entry box to view the keyboard.
Slide your finger up or down the screen to scroll up
or down the page.
19
HOW TO USE THE MANUAL MODE
one of the numbered Quick Incline/Decline buttons.
Each time you press one of the buttons, the incline
will gradually change until it reaches the selected
incline setting.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
18. Note: It may take a minute for the console to
be ready for use.
Note: The first time you adjust the incline, you must
first calibrate the incline system (see step 4 on
page 26).
2. Select the main menu.
5. Monitor your progress.
When you turn
on the power,
the main menu
should appear
after the
console boots
up. Touch the
home button in
the lower-left
corner of the screen (not shown here) to return to
the main menu at any time.
The console
offers several display
modes. The
display mode
that you select
will determine
which workout
information is shown. To select the desired display
mode, simply flick or slide the screen. You can also
view additional information by touching the red
boxes on the screen.
3. Start the walking belt and adjust the speed.
Touch the Start button on the screen or press the
Start button on the console to start the walking
belt. You can also press the Manual button on the
console, and then touch the Resume button on the
screen. The walking belt will begin to move at 1
mph.
As you walk or run on the treadmill, the screen can
show the following workout information:
As you exercise, change the speed of the walking
belt as desired by pressing the Speed increase and
decrease buttons. Each time you press one of the
buttons, the speed setting will change by 0.1 mph;
if you hold down the button, the speed setting will
change in increments of 0.5 mph.
If you press one of the numbered Quick Speed buttons, the walking belt will gradually change speed
until it reaches the selected speed setting.
To select a speed setting that includes a decimal—
such as 3.5 mph—press two numbered buttons in
succession. For example, to select a speed setting
of 3.5 mph, press the 3 button and then immediately press the 5 button. Note: This will not function
if the console is set to metric units.
To stop the walking belt, press the Stop button. To
restart the walking belt, press the Start button.
4.Change the incline of the treadmill as desired.
To change the incline of the treadmill, press the
Incline/Decline increase and decrease buttons or
20
• The incline level of the treadmill
• The time elapsed
• T
he time left (Note: The manual mode does not
have a time left countdown.)
• The approximate number of calories you have
burned
• T
he approximate number of calories you are
burning per hour
• The distance that you have walked or run
• The number of vertical feet you have climbed
• The speed of the walking belt
• A track representing 1/4 mile (400 m)
• Your pace in minutes per mile
• Your current lap number
• Your heart rate (see step 6)
7. Turn on the fan if desired.
If desired, adjust the volume by pressing the Vol
increase and decrease buttons on the console.
The fan features multiple speed settings and an
auto mode. When the auto mode is selected,
the speed of the fan will automatically increase
and decrease as the speed of the walking belt
increases and decreases.
Press the Fan increase button to increase the fan
speed. Note: If you press the Fan increase button
once while the fan is on its maximum speed setting, the auto fan mode will be selected. Press the
Fan decrease button repeatedly to decrease the
fan speed or to turn off the fan.
To pause the workout, touch one of the menu buttons or press the Stop button on the console. To
continue the workout, touch the Resume button or
the Start button. To end the workout session, touch
the End Workout button.
6. Measure your heart rate if desired.
Note: If you use the handgrip heart rate monitor and the chest heart rate monitor at the same
time, the console will not display your heart
rate accurately. For information about the chest
heart rate monitor, see page 15.
8.When you are finished exercising, remove the
key from the console.
Before using the handgrip heart rate monitor,
remove the sheets of plastic from the metal contacts. In addition, make sure that your hands are
clean.
Step onto the walking platform and touch the home
button or the back button on the screen or press
the Stop button on the console. A workout summary will appear on the screen. After you view
the workout summary, touch the Finish button to
return to the main menu. You may also be able to
either save or publish your results using one of the
options on the screen. Then, remove the key from
the console and put it in a secure place.
To measure your
heart rate, stand
on the foot rails
and hold the
contacts with
your palms for
approximately
ten seconds;
avoid moving
Contacts
your hands.
When your pulse
is detected, your
heart rate will be shown. For the most accurate
heart rate reading, continue to hold the contacts for about 15 seconds.
When you are finished using the treadmill, press
the power switch into the off position and unplug
the power cord. IMPORTANT: If you do not do
this, the treadmill’s electrical components may
wear prematurely.
21
HOW TO USE AN ONBOARD WORKOUT
screen. After you view the workout summary, touch
the Finish button to return to the main menu. You
may also be able to either save or publish your
results using one of the options on the screen.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on
page 18.
If the speed or incline setting is too high or too low
at any time during the workout, you can override
the setting by pressing the Speed or Incline buttons; however, when the next segment begins,
the treadmill will automatically adjust to the
speed and incline settings for the next
segment.
2. Select an onboard workout.
To select an onboard workout, press the Calorie
button, the Intensity button, the Speed button, or
the Incline button on the console. Note: You can
also touch the runner button on the screen to select
the Workouts menu.
To pause the workout, touch either the back button
or the home button in the lower-left corner of the
screen, or press the Stop button on the console. To
continue the workout, touch the Resume button or
press the Start button on the console. To end the
workout, touch the End Workout button.
Then, select the desired workout. The screen will
show the name, duration, and distance of the workout. The screen will also show the approximate
number of calories you will burn during the workout
and a profile of the incline settings of the workout.
Note: The calorie goal is an estimate of the
number of calories that you will burn during
the workout. The actual number of calories that
you burn will depend on your metabolic rate. In
addition, if you manually change the speed or
incline of the treadmill during the workout, the
number of calories you burn will be affected.
3. Start the workout.
Touch the Start Workout button to start the workout. A moment after you touch the button, the
walking belt will begin to move. Hold the handrails
and begin walking.
Each workout is divided into several segments.
One speed setting and one incline setting are
programmed for each segment. Note: The same
speed setting and/or incline setting may be programmed for consecutive segments.
4. Monitor your progress.
During the workout, the profile will show your progress. To view the profile, flick or slide the screen.
The vertical colored line will indicate the current
segment of the workout. The bottom profile represents the incline setting of the current segment.
The top profile represents the speed setting of the
current segment.
5. Measure your heart rate if desired.
At the end of the first segment of the workout, the
treadmill will automatically adjust to the speed and/
or incline settings for the next segment.
7.When you are finished exercising, remove the
key from the console.
See step 5 on page 20. The screen can also show
a profile of the speed and incline settings of the
workout.
See step 6 on page 21.
6. Turn on the fan if desired.
The workout will continue in this way until the last
segment ends. The walking belt will then slow to
a stop and a workout summary will appear on the
22
See step 7 on page 21.
See step 8 on page 21.
HOW TO USE A SET-A-GOAL WORKOUT
The workout will function in the same way as the
manual mode (see pages 20 and 21).
1. Insert the key into the console.
The workout will continue until you reach the goal
that you set. The walking belt will then slow to a
stop, and a workout summary will appear on the
screen. After you view the workout summary, touch
the Finish button to return to the main menu. You
may also be able to either save or publish your
results using one of the options on the screen.
See HOW TO TURN ON THE POWER on
page 18.
2. Select the main menu.
See step 2 on page 20.
3. Select a set-a-goal workout.
Note: The calorie goal is an estimate of the
number of calories that you will burn during the
workout. The actual number of calories that you
burn will depend on your metabolic rate.
To select a set-a-goal workout, touch the Set A
Goal button on the screen or press the Set A Goal
button on the console.
5. Monitor your progress.
To set a
calorie, time,
distance, or
pace goal,
touch the
Calories, Time,
Distance, or
Pace button.
Then, touch the increase and decrease buttons
on the screen to select a calorie, time, distance, or
pace goal and to select the speed and incline for
the workout. The screen will show the duration and
distance of the workout, and the approximate number of calories you will burn during the workout.
See step 5 on page 20.
6. Measure your heart rate if desired.
See step 6 on page 21.
7. Turn on the fan if desired.
See step 7 on page 21.
8.When you are finished exercising, remove the
key from the console.
4. Start the workout.
Touch the Start button to start the workout. A
moment after you touch the button, the walking belt
will begin to move. Hold the handrails and begin
walking.
23
See step 8 on page 21.
HOW TO USE AN IFIT LIVE WORKOUT
Before some workouts will download, you must add
them to your schedule on iFit.com.
Note: To use an iFit Live workout, you must have
access to a wireless network (see HOW TO USE THE
WIRELESS NETWORK MODE on page 27). An iFit
Live account is also required.
For more information about the iFit Live workouts, please see www.iFit.com.
2. Select the main menu.
When you select an iFit Live workout, the screen
will show the name, duration, and distance of the
workout. The screen will also show the approximate number of calories you will burn during the
workout. If you select a competition workout, the
display will count down to the beginning of the
race.
5. Start the workout.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on
page 18.
See step 2 on page 20.
3. Log in to your iFit Live account.
If you have not already done so, touch the Login
button to log in to your iFit Live account. The
screen will ask for your iFit.com username and
password. Enter them and touch the Login button.
Touch the Cancel button to exit the login screen.
During some workouts, the voice of a personal
trainer will guide you through your workout.
See step 3 on page 22.
6. Monitor your progress.
See step 5 on page 20. The screen may also show
a map of the trail you are walking or running.
4.Select an iFit Live workout.
To download
an iFit Live
workout in
your schedule,
touch the Map,
Train, Video,
or Lose Weight
button to
download the
next workout of that type in your schedule. Note:
You may be able to access demo workouts through
these options, even if you do not log in to an iFit
Live account.
During a competition workout, the screen will show
the speeds of the runners and the distances they
have run. The screen will also show the numbers of
seconds that the other runners are ahead of you or
behind you.
To compete in a race that you have previously
scheduled, touch the Compete button. To view your
Workout History, touch the Track button. To use a
set-a-goal workout, touch the Set A Goal button
(see page 23). Note: You can also press one of the
iFit Live buttons on the console.
9.When you are finished exercising, remove the
key from the console.
7. Measure your heart rate if desired.
See step 6 on page 21.
8. Turn on the fan if desired.
See step 7 on page 21.
See step 8 on page 21.
For more information about the iFit Live mode, go
to www.iFit.com.
To switch users within the account, touch the user
button near the lower right corner of the screen.
24
HOW TO USE THE EQUIPMENT SETTINGS MODE
reset position, and insert the key into the console.
However, when you remove the key, the screen will
show a demo presentation.
The console features an equipment settings mode
that allows you to select a language and the unit of
measurement, to turn on and turn off the display demo
mode, and to enable or disable the key.
To turn on or turn off the display demo mode, first
touch the Demo Mode button. Next, touch the On
checkbox or the Off checkbox. Then, touch the
back button on the screen.
1. Select the settings main menu.
6. Enable or disable the key.
Insert the key into the
console (see HOW
TO TURN ON THE
POWER on page 18).
Next, select the main
menu (see step 2 on
page 20). Then, touch
the gears button near the lower right corner of the
screen to select the settings main menu.
Note: This feature may not be enabled on your
treadmill.
You can disable the key so that the treadmill does
not require the use of the key if desired. Touch the
Safety Key button. To disable the key, touch the
Disable checkbox. CAUTION: Read the safety
warning on the screen before disabling the
key. To enable the key again, touch the Enable
checkbox.
2. Select the equipment settings mode.
In the settings main menu, touch the Equipment
Settings button.
7. Enable or disable a passcode.
3. Select a language.
The console features a child safety passcode,
designed to prevent unauthorized users from using
the treadmill.
To select a language, touch the Language button
and select the desired language. Then, touch the
back button on the screen to return to the equipment settings mode. Note: This feature may not be
enabled.
Touch the Passcode button. To enable a passcode,
touch the Enable checkbox. Then, enter a 4-digit
passcode of your choice. Touch Save to use this
passcode. Touch Cancel to return to the equipment
settings mode and not use a passcode. To disable
the passcode, touch the Disable checkbox.
4. Select the unit of measurement.
Touch the US/Metric button to view the selected
unit of measurement. Change the unit of measurement, if desired. Then, touch the back button on
the screen.
Note: If a passcode is enabled, the console will
regularly ask for you to enter the passcode. The
console will remain locked until the correct passcode is entered. IMPORTANT: If you forget your
passcode, enter the following master passcode
to unlock the console: 1985.
5. Turn on or turn off the display demo mode.
The console features a display demo mode,
designed to be used if the treadmill is displayed
in a store. While the demo mode is turned on, the
console will function normally when you plug in
the power cord, press the power switch into the
8. Exit the equipment settings mode.
To exit the equipment settings mode, touch the
back button on the screen.
25
HOW TO USE THE MAINTENANCE MODE
computer and plug it into the USB port on the side
of the console. The update should begin
automatically.
The console features a maintenance mode that allows
you to update the console firmware, calibrate the
incline of the treadmill, calibrate the screen, view technical information, and view a button’s keycode.
The screen will show the progress of the update.
When the update is complete, the treadmill will turn
off and then turn back on. If it does not, press the
power switch into the off position. Wait for several
seconds, and then press the power switch into the
reset position. Note: It may take a few minutes for
the console to be ready for use.
1. Select the settings main menu.
See step 1 on page 25.
2. Select the maintenance mode.
4.Calibrate the incline system of the treadmill.
In the settings
main menu,
touch the
Maintenance
button to enter
the maintenance mode.
Touch the Calibrate Incline button. Then, touch the
Begin button to calibrate the incline system. The
treadmill will automatically rise to the maximum
incline level, lower to the minimum incline level,
and then return to the starting position. This will
calibrate the incline system. Press the Cancel button to return to the maintenance mode. When the
incline system is calibrated, touch the Finish
button.
The maintenance mode main screen will show information
about the model and version of the treadmill.
IMPORTANT: Keep pets, feet, and other objects
away from the treadmill while the incline system is calibrating. In an emergency, pull the key
from the console to stop the incline
calibration.
3. Update the console firmware.
For the best results, regularly check for firmware updates.
5. View machine information.
Touch the Firmware Update button to check for
firmware updates using your wireless network. The
update will begin automatically.
Touch the Machine Info button to view information
about your treadmill. After you view the information,
touch the back button on the screen.
To avoid damaging the treadmill, do not turn off
the power or remove the key while the firmware
is being updated.
Note: Occasionally, a firmware update may cause
your console to function slightly differently. These
updates are always designed to improve your exercise experience.
6. Find keycodes.
The Keycodes button is intended to be used by
service technicians to identify whether a certain
button is working correctly.
7. Exit the maintenance mode.
Note: If you cannot update the console firmware
over your wireless network, you can update the
firmware using a USB drive. Go to www.iFit.com
and download the latest firmware update onto your
USB drive. Safely remove the USB drive from your
To exit the maintenance mode, press the back button on the console.
26
HOW TO USE THE WIRELESS NETWORK MODE
An information box will ask if you want to connect
to the wireless network. Touch the Connect button
to connect to the network or touch the Cancel button to return to the list of networks. If the network
has a password, touch the password entry box. A
keyboard will appear on the screen. To view the
password as you type it, touch the Show Password
checkbox.
The console features a wireless network mode that
allows you to set up a wireless network connection.
1. Select the settings main menu.
See step 1 on page 25.
2. Select the wireless network mode.
To use the keyboard, see HOW TO USE THE
TOUCH SCREEN on page 18.
In the settings main menu, touch the Wireless
Network button to enter the wireless network mode.
When the console is connected to your wireless
network, the WiFi menu option at the top of the
screen will display the word CONNECTED. Then,
press the back button on the console to return to
the wireless network mode.
3. Enable Wi-Fi.
Make sure that the Wi-Fi checkbox is marked with
a green checkmark. If it is not, touch the Wi-Fi
menu option once and wait for a few seconds. The
console will search for available wireless networks.
To disconnect from a wireless network, select the
wireless network and then touch the Forget button.
4.Set up and manage a wireless network
connection.
If you are having problems connecting to an
encrypted network, make sure that your password
is correct. Note: Passwords are case-sensitive.
When Wi-Fi is enabled, the screen will show a list
of available networks. Note: It may take several
seconds for the list of wireless networks to appear.
Note: The iFit Live mode supports unsecured and
secured (WEP, WPA, and WPA2) encryption. A
broadband connection is recommended; performance depends on connection speed.
Make sure that the checkbox on the Network
notification menu option is marked with a green
checkmark to have the console notify you when a
wireless network is within range and available.
Note: If you have questions after following
these instructions, go to www.iFit.com/support
for assistance.
Note: You must have your own wireless network
and an 802.11b/n router with SSID broadcast
enabled (hidden networks are not supported).
5. Exit the wireless network mode.
To exit the wireless network mode, press the back
button on the console.
When a list of networks appears, touch the desired
network. Note: You will need to know your network
name (SSID). If your network has a password, you
will also need to know the password.
27
HOW TO USE THE STEREO SOUND SYSTEM
HOW TO USE THE INTERNET BROWSER
To play music or audio books through the console’s
speakers, you must connect your MP3 player, CD
player, or other personal audio player to the console.
Note: To use the browser, you must have access to a
wireless network including an 802.11b/n router with
SSID broadcast enabled (hidden networks are not
supported).
Locate the audio wire. Plug one end into the audio jack
on the side of the console. Then, plug the other end
into a jack on your MP3 player, CD player, or other
personal audio player. Make sure that the audio wire
is fully plugged in.
To open the browser, touch the globe button near the
lower left corner of the screen. Then, select a website.
To return to the previous web page, press the back
button on the console or touch the Browser Back button on the screen. To exit the browser, press the home
button on the console or touch the Return button on
the screen.
Next, press the play button on your MP3 player, CD
player, or other personal audio player. Then, adjust the
volume level on your personal audio player or press
the Vol increase and decrease buttons on the console.
To use the keyboard, see HOW TO USE THE TOUCH
SCREEN on page 18.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat
surface instead of on the console.
To enter a different web address in the URL bar, first,
slide your finger down the screen to view the URL bar,
if necessary. Then, touch the URL bar, use the keyboard to enter the address, and touch the Go button.
Note: The USB port on the side of the console is for
firmware updates only.
Note: While you are using the browser, the speed,
incline, fan, and volume buttons will still function, but
the workout buttons will not function.
THE COOL DOWN MODE
To select the cool down mode, press the Cool Down
button. The walking belt will slow down to 2 mph
(unless it is already moving at 2 mph or slower). A
countdown of three minutes will begin, after which the
walking belt will slow to a stop.
Note: If you have questions after following these
instructions, go to www.iFit.com/support for
assistance.
28
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL
HOW TO MOVE THE TREADMILL
To avoid damaging the treadmill, adjust the
incline to 0 percent before you fold the treadmill.
Then, remove the key and unplug the power cord.
CAUTION: You must be able to safely lift 45 lbs. (20
kg) to raise, lower, or move the treadmill.
efore moving the treadmill, fold it as described at the
B
left. CAUTION: Make sure that the latch knob is
locked in the storage position. Moving the treadmill
may require two people.
1. Hold the frame and one of the handrails, and place
one foot against a wheel.
1. Hold the frame firmly in the location shown by the
arrow below. CAUTION: Bend your legs and
keep your back straight.
1
1
Frame
Handrail
Frame
Wheel
2.Raise the frame until the latch knob locks in the
storage position. CAUTION: Make sure that the
latch knob locks.
2. Pull back on the handrail until the treadmill will roll
on the wheels, and carefully move it to the desired
location. CAUTION: Do not move the treadmill without tipping it back, do not pull on the
frame, and do not move the treadmill over an
uneven surface.
2
Frame
3. Place one foot against a wheel, and carefully lower
the treadmill.
HOW TO LOWER THE TREADMILL FOR USE
Latch
Knob
1.
See drawing 2. Hold the upper end of the treadmill frame with your right hand. Then, pull the latch
knob to the left. IMPORTANT: Do not turn the
latch knob. If necessary, push the frame forward
slightly. Pivot the frame downward a few inches,
and release the latch knob.
To protect the floor or carpet, place a mat under the
treadmill. Keep the treadmill out of direct sunlight.
Do not leave the treadmill in the storage position in
temperatures above 85° F (30° C).
2. S
ee drawing 1 at the left. Hold the metal frame
firmly with both hands, and lower it to the floor.
CAUTION: Do not hold the frame by the plastic
foot rails, and do not drop the frame. Bend your
legs and keep your back straight.
29
TROUBLESHOOTING
Most treadmill problems can be solved by following the simple steps below. Find the symptom that
applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual.
c.Remove the key from the console, and then
reinsert it.
d.If the treadmill still will not run, please see the front
cover of this manual.
SYMPTOM: The power does not turn on
SYMPTOM: The console displays remain lit when
you remove the key from the console
a.Make sure that the power cord is plugged into a
surge suppressor and that the surge suppressor
is plugged into a properly grounded outlet (see
page 16). Use only a surge suppressor that meets
all of the specifications described on page 16.
IMPORTANT: The treadmill is not compatible
with GFCI-equipped outlets and may not be
compatible with AFCI-equipped outlets.
a.The console features a display demo mode,
designed to be used if the treadmill is displayed
in a store. If the screen shows a preset presentation when you remove the key, the demo mode is
turned on. To turn off the demo mode, see step 5
on page 25.
b.After the power cord has been plugged in, make
sure that the key is inserted into the console.
SYMPTOM: The displays of the console do not
function properly
c.Check the power switch located on the treadmill
frame near the power cord. If the switch protrudes
as shown, the switch has tripped. To reset the
power switch, wait for five minutes and then press
the switch back in.
a.Remove the key from the console and UNPLUG
THE POWER CORD. Place the treadmill in
the storage position (see HOW TO FOLD THE
TREADMILL on page 29).
Next, remove the two indicated #8 x 3/4" Screws
(2).
c
Tripped
a
Reset
2
SYMPTOM: The power turns off during use
a.Check the power switch (see the drawing above).
If the switch has tripped, wait for five minutes and
then press the switch back in.
b.Make sure that the power cord is plugged in. If the
power cord is plugged in, unplug it, wait for five
minutes, and then plug it back in.
30
SYMPTOM: The walking belt slows when walked on
Lower the treadmill (see HOW TO LOWER THE
TREADMILL FOR USE on page 29). Remove
the three #8 x 3/4" Screws (2). Carefully pivot the
Motor Hood (72) off.
72
a.Use only a surge suppressor that meets all of the
specifications described on page 16.
b.If the walking belt is overtightened, treadmill performance may decrease and the walking belt may
become damaged. Remove the key and UNPLUG
THE POWER CORD. Using the hex key, turn both
idler roller screws counterclockwise, 1/4 of a turn.
When the walking belt is properly tightened, you
should be able to lift each edge of the walking belt
2 to 3 in. (5 to 7 cm) off the walking platform. Be
careful to keep the walking belt centered. Then,
plug in the power cord, insert the key, and run the
treadmill for a few minutes. Repeat until the walking belt is properly tightened.
2
Locate the Reed Switch (59) and the Magnet (58)
on the left side of the Pulley (61). Turn the Pulley
until the Magnet is aligned with the Reed Switch.
Make sure that the gap between the Magnet
and the Reed Switch is about 1/8 in. (3 mm). If
necessary, loosen the #8 x 3/4" Tek Screw (16),
move the Reed Switch slightly, and then retighten
the Screw. Reattach the Motor Hood (not shown)
with the five #8 x 3/4" Screws (not shown) and run
the treadmill for a few minutes to check for a correct speed reading.
b
2–3 in.
Idler Roller Screws
Top
View
c.Your treadmill features a walking belt coated with
high-performance lubricant. IMPORTANT: Never
apply silicone spray or other substances to
the walking belt or the walking platform unless
instructed to do so by an authorized service
representative. Such substances may deteriorate the walking belt and cause excessive wear.
If you suspect that the walking belt needs more
lubricant, see the front cover of this manual.
1/8 in.
59
16
58
61
SYMPTOM: The incline of the treadmill does not
change correctly
d.If the walking belt still slows when walked on, see
the front cover of this manual.
a. Calibrate the incline system (see step 4 on page
26).
31
SYMPTOM: The walking belt is off-center or slips
when walked on
SYMPTOM: The iFit Live mode does not function
correctly
a. If the walking belt is off-center, first remove the
key and UNPLUG THE POWER CORD. If the
walking belt has shifted to the left, use the hex
key to turn the left idler roller screw clockwise 1/2
of a turn; if the walking belt has shifted to the
right, turn the left idler roller screw counterclockwise 1/2 of a turn. Be careful not to overtighten the
walking belt. Then, plug in the power cord, insert
the key, and run the treadmill for a few minutes.
Repeat until the walking belt is centered.
a.If the iFit Live mode is not functioning correctly,
make sure that the treadmill has the most current
firmware available (see step 3 on page 26).
SYMPTOM: The treadmill will not connect to the
wireless network
a.Make sure that the wireless settings on your console are correct (see step 4 on page 27).
b.Make sure that the settings for your wireless network are correct.
a
c.If you still have questions, see the front cover of
this manual.
b. If the walking belt slips when walked on, first
remove the key and UNPLUG THE POWER
CORD. Using the hex key, turn both idler roller
screws clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able
to lift each edge of the walking belt 2 to 3 in. (5 to
7 cm) off the walking platform. Be careful to keep
the walking belt centered. Then, plug in the power
cord, insert the key, and carefully walk on the
treadmill for a few minutes. Repeat until the walking belt is properly tightened.
b
32
EXERCISE GUIDELINES
Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
WARNING:
Before beginning this
or any exercise program, consult your physician. This is especially important for persons
over age 35 or persons with pre-existing
health problems.
The heart rate monitor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The heart rate monitor is
intended only as an exercise aid in determining heart rate trends in general.
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic
exercise, which is activity that requires large amounts
of oxygen for prolonged periods of time. For aerobic
exercise, adjust the intensity of your exercise until your
heart rate is near the highest number in your training
zone.
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
WORKOUT GUIDELINES
EXERCISE INTENSITY
Warming Up—Start with 5 to 10 minutes of stretching and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.
Training Zone Exercise—Exercise for 20 to 30 minutes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise—never hold your breath.
Cooling Down—Finish with 5 to 10 minutes of stretching. Stretching increases the flexibility of your muscles
and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your
age define your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exercise, you may complete up to five workouts each week,
if desired. Remember, the key to success is to make
exercise a regular and enjoyable part of your everyday
life.
33
PART LIST
Model No. PFTL16011.0 R1211A
Key No. Qty.
Description
Key No. Qty.
Description
#8 x 1/2" Screw
#8 x 3/4" Screw
#10 x 3/4" Screw
5/16" x 5/8" Screw
3/8" x 2" Bolt
3/8" x 1" Screw
3/8" x 1 3/4" Bolt
3/8" x 2 3/4" Screw
3/8" x 1 1/4" Screw
#8 x 1/2" Ground Screw
#10 Star Washer
5/16" Star Washer
3/8" Nut
3/8" Star Washer
3/8" x 1" Flat Head Bolt/Screw
#8 x 3/4" Tek Screw
1/4" x 2 1/2" Screw
3/8" x 2" Bolt
#8 x 3/4" Pan Head Tek Screw
#8 x1" Screw
3/8" x 1 1/2" Bolt
3/8" x 2" Bolt
#8 x 1 3/4" Screw
#8 x 7/16" Screw
5/16" Motor Screw
1/2" x 1 1/2" Bolt
5/16" x 1 3/4" Bolt
5/16" x 1 1/4" Bolt
5/16" x 3 1/4" Screw
5/16" x 2 3/8" Screw
1/4" x 1 3/4" Screw
1/4" Star Washer
5/16" Flat Washer
3/8" Flat Washer
1/2" Nut
3/8" Jam Nut
5/16" Nut
Hood Clip
Platform Grommet
5/16" Washer
1/2" Rear Leveling Foot Nut
Hex Key
Short Hex Key
Left Frame Cap
Left Foot Rail
Platform Bracket
Left Foot Rail Base
Left Frame Cover
Idler Roller
Right Frame Cap
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Walking Belt
Platform Cushion Bracket
Walking Platform
Platform Cushion
Belt Guide
Front Cushion
Reed Switch Clamp
Magnet
Reed Switch
Wire Tie
Drive Roller/Pulley
Right Foot Rail
Right Foot Rail Base
Frame
Storage Latch
Drive Motor
Motor Belt
Right Fame Cover
Rear Leveling Foot
Rear Leveling Foot Cover
Rear Frame Cover
Motor Hood
Hood Cover
Incline Frame Spacer
Incline Motor
Incline Frame
Frame Spacer
Controller
Electronics Plate
Power Cord
Power Cord Grommet
Hood Post
Power Switch
Belly Pan
Pulse Bar Top
Pulse Bar
Tray
Upright Wire
Handrail Bracket
Left Upright
Tray Bracket
Left Handrail
Right Handrail
Caution Decal
Latch Warning Decal
Left Base Cover
Right Base Cover
Key/Clip
Right Upright
Base Pad
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
9
47
4
4
1
4
1
4
4
7
4
4
2
12
6
29
2
2
10
8
1
1
2
4
2
2
2
2
16
8
1
1
2
2
2
6
12
3
2
8
2
1
1
1
1
8
1
1
1
1
34
1
2
1
2
2
2
1
1
1
4
1
1
1
1
1
1
1
1
2
2
1
1
1
2
1
1
2
1
1
1
1
2
1
1
1
1
1
1
2
1
2
1
1
3
1
1
1
1
1
2
Key No. Qty.
Description
Key No. Qty.
Description
101
102
103
104
105
106
107
108
109
110
Grommet
Front Base Pad
Left Wheel Cap
Wheel
Base
Heart Rate Strap
Heart Rate Sensor
Console Base
Audio Wire
Left Tray
111
112
113
114
115
116
117
118
119
*
Right Tray
Console
Console Frame
Console Clamp
Console Ground Wire
Cable Tie
Right Handrail Cover
Left Handrail Cover
Right Wheel Cap
User’s Manual
2
2
1
2
1
1
1
1
1
1
1
1
1
4
1
6
1
1
1
–
Note: Specifications are subject to change without notice. For information about ordering replacement parts, see
the back cover of this manual. *These parts are not illustrated.
35
36
42
17
48
16
16
43
19
19
27
71
95
39
33
37
29
45
29
19
49
16
41
44
50
51
69
19
70
54
29
46
17
46
52
30
37 40
46
53
16
37
40
19
27
39
33
37
16
40
37
46
40
29
16
37
16
69
41
70
29
46
30
37
40
24
47 16
54
52
30
19
16
55
2
16
40
37
57
7
29
46
16
16
28
37
30
68
13
63
56
26
16
40
37
30
46
64
30
58
16
29
40
37
61
62
16
23
59
67
65
2
29
46
55
10
24
30
60
28
25
66
13
16
56
37
31
32
5
26
10
30
23
EXPLODED DRAWING A
Model No. PFTL16011.0 R1211A
EXPLODED DRAWING B
Model No. PFTL16011.0 R1211A
2
38
2
38
2
38
72
22
74
73
77
10
76
35
36
75
15
21
36
15
74
78
2
82
2
2
80
82
2
16
10 81
83
84
16
37
77
2
79
2
35
EXPLODED DRAWING C
Model No. PFTL16011.0 R1211A
3
11
87
88
85
15
14
2
89
14
6
15
14
86
2
90
92
91
2
2
14
6
3
11
2
15
91
96
2
93
4
12
118
2 94
12
4
117 98
2
14
89
14
6
2
9
8
14
14
6
8
101
36
10
94
88
97
99
102
2
36 103
100
18
94
16
16
8
36
105
8
104 34
18
34
104
102
119
2
36
38
100
16
14
16
9
EXPLODED DRAWING D
106
Model No. PFTL16011.0 R1211A
2
108
107
2
2
2
109
2
1
110
2
1
1
111
1
1
2
2
1
1
112
113
114
20
114
20
10
115 114
20
2
2
116
114
20
39
116
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED
DRAWING near the end of this manual)
LIMITED WARRANTY
IMPORTANT: You must register this product within 30 days of the purchase date to avoid added
fees for service needed under warranty. Go to www.proformservice.com/registration.
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions. The frame and drive motor are warranted for a lifetime.
Parts are warranted for five (5) years from the date of purchase. Labor is warranted for two (2) years from
the date of purchase.
This warranty extends only to the original purchaser (customer). ICON’s obligation under this warranty is
limited to repairing or replacing, at ICON’s option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be preauthorized by ICON. If the product is shipped
to a service center, freight charges to and from the service center will be the customer’s responsibility. If
replacement parts are shipped while the product is under warranty, the customer will be responsible for a
minimal handling charge. For in-home service, the customer will be responsible for a minimal trip charge.
This warranty does not extend to freight damage to the product. This warranty will automatically be voided
if the product is used as a store display model, if the product is purchased or transported outside the USA,
if all instructions in this manual are not followed, if the product is abused or improperly or abnormally used,
or if the product is used for commercial or rental purposes. No other warranty beyond that specifically set
forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special, or consequential damages arising out of or in connection with the use or performance of the product; damages with respect to any economic loss, loss of
property, loss of revenues or profits, loss of enjoyment or use, or costs of removal or installation; or other
consequential damages of any kind. Some states do not allow the exclusion or limitation of incidental or
consequential damages. Accordingly, the above limitation may not apply to the customer.
The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties of
merchantability or fitness for a particular purpose are limited in their scope and duration to the terms set
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the
above limitation may not apply to the customer.
This warranty provides specific legal rights; the customer may have other rights that vary from state to state.
ICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT 84321-9813
Part No. 322851 R1211A
Printed in USA © 2011 ICON IP, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement