NX950 GPS Runner English - New Balance Sports Monitors

NX950 GPS Runner English - New Balance Sports Monitors
 PRESS & HOLD LIGHT to
ACTIVATE / DEACTIVATE
NIGHT MODE.
With NIGHT
— Mode ACTIVE,
the Backlight
NEW bala nce. will remain
ON
for the LIGHT
duration
of your workout.
This will drain
the battery faster.
o NE ST/STP
X | M ODE VÍ L AP / RST
A moon icon
| \ О! ( will appear newbalance
in the display
to denote NIGHT MODE.
G PS Ru n ner A sun icon will appear in the
display to denote DAY MODE
(normal use). Quick PRESS
LIGHT to shine for 3 seconds.
VIEW
Please visit www.nbmonitors.com to download GPS software
User Manual and view additional information.
NEW BALANCE NX950 GPS RUNNER
Thank you for selecting the New Balance NX950 GPS Runner, our premier satellite-based navigational system
that tracks Speed, Distance and Pace. The New Balance NX950 GPS Runner utilizes advanced satellite-based
navigational technology to provide you a sophisticated, user-friendly sports monitor that can help take your
training to the next level.
WARNINGS & CAUTIONS
WARNING: THIS IS NOT A MEDICAL DEVICE. Before starting any exercise program, we strongly suggest
that you to visit your doctor for a complete physical and to discuss your exercise plans.
PLEASE READ all of the information in this instruction manual before using this unit. Make sure that you fully
understand the functions and limitations of this product before using it.
CAUTION: The New Balance NX950 GPS Runner is a satellite-based navigational system which functions in
conjunction with a network of 24 or more satellites. Poor weather conditions, tall buildings and dense tree
canopies may interfere with GPS accuracy.
NOTE: Please allow the watch time to acquire GPS signal; data recorded without properly allowing time to synch
with GPS may not be accurate.
WARNING: While this watch is 50M Water Resistant, it IS NOT WATERPROOF and is not intended to be used
while swimming. We strongly suggest you to remove the watch before showering, swimming or any activity in
which the watch may come in contact with water. Prolonged water submersion may cause electronic shorting in
the unit.
NEVER push the buttons underwater, when the watch is wet or when you are cleaning or rinsing the unit. You
are actually pushing water inside the watch.
DO NOT use the watch in a hot tub or extremely hot shower/bath. High temperatures and steam can damage
the rubber seals.
DO NOT expose the watch to sudden changes of temperature. This can make the rubber seals contract and
allow water / moisture to penetrate.
DO NOT wear the watch in soapy dish water or bubble baths. The alkali contained in soaps can damage the
rubber seals.
DO NOT use cleaning solvents to clean your watch. Solvents WILL damage the integrity of the plastic. The
watch can be wiped clean with a lightly moistened cloth.
ALWAYS rinse the watch with clear tap water after exposure to salt water. Salt is highly corrosive and can
damage both the rubber seals and the watch case.
PROTECT the watch from extreme heat, shocks and excessive exposure to direct sunlight. Keep the watch
away from strong electric fields and static electricity.
NEVER expose the watch to strong chemicals such as gasoline, cleaning solvents, acetone, alcohol, insect
repellent, sunscreen and other toiletries, as they may damage the unit.
DO NOT charge or connect the unit with the USB clip when it is wet. Wipe dry and air dry before using.
NOTE: Discoloration on light-color and transparent straps may occur over time with normal wear.
WARNING: In case of any skin reaction, such as severe redness, itching, rash or hives, you should stop wearing
this watch and consult your doctor.
WARNING: This watch contains electronic components. Never attempt to open the case or remove the back
cover. THIS WILL VOID YOUR WARRANTY.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference that may cause undesired operation of the device.
Tested to comply with FCC standards. For home or office use.
FCC WARNING: Changes or modifications not expressly approved by Implus Footcare, LLC could void your
warranty and your authority to operate this device under FCC regulations.
NOTE: This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and radiates
radio frequency energy. If it is not installed and used in accordance with the instructions, it may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is recommended to reduce the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation space between the watch and the receiver.
- Consult the dealer or an experienced radio/TV technician for help.
Components included:
- GPS-Enabled Watch - USB Charging Cable - Instruction Manual
Please visit www.nbmonitors.com to download GPS software and view additional information.
LIGHT ST/STP
VIEW
MODE LAP / RST :
newbalance USB
CHARGING
EXE CABLE
GPS
CONTACTS
New Balance NX950 GPS Runner Features
Speed & Distance:
- Monitors: Speed, Distance and Pace
Workout Mode: Time / Alarm:
- Range: 100 Hours - Time / Day / Date
- Resolution: 1/100 Seconds - Daylight Savings Time Option (Auto Updates)
- 99 Laps / Splits - 12-Hour or 24-Hour Format
- Comprehensive Run and Lap Data Recall - Daily Alarm
- 2 Profiles : Running and Cycling
- 2 Customizable Workout Displays Other:
for Both Profiles - Easy-to-Use PC / Mac® Compatible Software
- Display Preset Options: Clock, Calories Burned, - LCD Contrast Adjustment
Distance, Pace, Average Pace, Speed, Average - Displays in Metric or Imperial Units
Speed, Workout Timer, Lap Number, Lap Time, - EL Backlight / Smart EL Backlight (Night Mode
cap Distance Backlight System)
-Auto Lap - 50M Water Resistant
Interval Timer Mode: - Dual-Processor Design for Optimal
Battery Life
- 6 Customizable Interval Timers
- Timers Set via Time or Distance
- Interval Can be Set to Repeat 1-99 Times
or Continuously
- Visual and Audible Alerts
- Comprehensive Timer Memory
- Fully Charged Watch Battery Life:
- Without Active GPS: 9-12 months
- With Active GPS: Up to 12 Hours
- Rechargeable Lithium Polymer Battery (Watch)
- USB Data Transfer and Battery Charging Cable
CHARGING THE WATCH
The New Balance NX950 GPS Runner has a built-in rechargeable battery. It is IMPORTANT to charge the watch for
at least 3 hours before using. The battery can be fully charged / discharged 500 times.
With a fully charged battery (depending on GPS and EL Backlight usage), the GPS battery will perform as follows:
- Without Active GPS: 9-12 Months
- With Active GPS: Up to 12 Hours
NOTE: To prevent corrosion or damage, ensure that there is no contamination, sweat, moisture or dirt between the
contacts of the charging cable and the back of the watch by gently wiping the back of the watch with a dry cloth.
Connecting the Charging Cable & the Watch
- Align the 4 contacts at the back of the watch with the 4 prongs on the charging cable.
- Make sure that the clip is securely positioned.
- Plug the USB end of the cable into your computer or charging source.
Battery Status Indicator
- In CLOCK mode, PRESS VIEW to view the battery
battery status indicator (GPS-Enabled Hours Remaining). _ Nun a ee §
Houre Remaipino ШИ
NOTE: Once the battery is near depletion, the GPS and —> ] 3 H
EL Backlight will become disabled. The watch, however,
will continue to display the time for an additional 2 weeks.
INSTALL COMPUTER SOFTWARE
PC Requirements: Windows® XP or newer, minimum 512 MB of RAM; minimum 200 MB of free hard drive space;
CD-ROM drive; Built-In USB Port.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Macintosh® Requirements: Mac® OSX v 10.5.8 or newer, Built-In USB Port.
Macintosh, Mac, iPhone and iPod Touch are trademarks of Apple, Inc., registered in the US & other countries.
Please visit www.nbmonitors.com to download GPS software and view additional information.
You will be prompted to download the necessary software onto your computer to operate
this portion of the NX950 GPS Runner. Once the software has been downloaded,
connect the charging cable to your watch and plug into a USB port on your computer. E
With the watch connected to the computer, open (run) the software.
The ‘charging icon’ will appear in the watch display to denote a
successful connection.
MODES OF OPERATION
I I | | | he | L
[a a k О) PF
Fi
À
LY ir
Interval
INTERVAL
Г “Ir = |. и п HENNE NNN § NEE N
Es E Bl Ls E
HISTORY CYCLING
SETTING THE WATCH
The New Balance NX950 GPS Runner is designed to provide important feedback about your training session.
It is important to set up all information for optimal data processing.
Set-Up via Computer Software (Quick Option): The RUNNING / CYCLING PROFILES, USER DATA and UNITS
OF MEASURE can be set-up quickly via the SETTINGS TAB of the Software.
Set-Up via Watch (Complete Option): All settings can be modified manually on the watch in the SETUP MODE.
SETUP MODE
- PRESS MODE until you enter SETUP MODE.
- To scroll through the OPTIONS MENU, PRESS ST / STP or LAP / RESET.
RUNNING > INTERVAL > CYCLING > DAILY ALARM >
CLOCK > USER DATA > SYSTEM
- To enter an OPTION, PRESS VIEW.
- To return to the MAIN modes selection, PRESS MODE until you exit SETUP MODE.
SETTING RUNNING / CYCLING PROFILES
The New Balance NX950 GPS Runner records and displays your performance, so you can keep track of your
progress. There are two training modes: RUNNING and CYCLING. Within each mode, you can toggle between
two displays, each showing 3-lines of information. This information can be customized to allow you to view the
details that are most important to your exercise routine.
DATA FIELDS > AUTO LAP
REMEMBER: Set-Up via Computer Software (Quick Option): The RUNNING / CYCLING PROFILES
(3-Line / 2-View Displays) can be cumbersome to set-up via the watch as there are multiple screen
options. This can be set-up quickly via the SETTINGS TAB of the Computer Software.
- PRESS MODE until you enter SETUP MODE.
- PRESS ST / STP or LAP / RESET to select RUNNING or CYCLING, then PRESS VIEW.
Setting Data Fields (Display Profiles)
- PRESS ST / STP or LAP / RESET to select DATA FIELDS, then PRESS VIEW.
- PRESS ST / STP or LAP / RESET to select the LINES that you wish to customize, then
PRESS VIEW.
- PRESS ST / STP or LAP / RESET to select the desire item (see chart below):
- PRESS VIEW to confirm, then PRESS MODE to return to DATA FIELDS setting sequence.
REPEAT to set all LINES.
- PRESS MODE again to return to the RUNNING / CYCLING MODE setting sequence.
NOTE:
DATA FIELDS OPTIONS Within the Data Fields Setup for Running
CALORIES 999 cal and Cycling, there are a total of 6 LINES
CLOCK | dico” that can be customized.
DISTANCE dq. 45. 1-3 6 Display one
Ee =r —— -6 is Display
LAP DISTANCE “999,
LAP NO In Running Mode and Cycling Mode, you will be
i LAR able to toggle between these 2 screen options to
LAP TIME 33:45 с view the data that you customized
PACE 09:59:
a <— UPPER
AVERAGE PACE A959 1 and 4
| | =
SPEED 9.9 KMH "à Fa" а <— MIDDLE
AVERAGE SPEED iL, 2 and 5
| |
WORKOUT TIME 55:55 5 | <— LOWER
3 and 6
Setting Auto Lap
The New Balance NX950 GPS Runner has the ability to automatically take a lap based on a set distance. Once
the auto-lap feature is turned ON and distance is set, the watch will automatically record the set laps during any
run without requiring the user to press LAP / RESET. This will continue until auto-lap is turned OFF.
- From the RUNNING / CYCLING setting, PRESS ST / STP or LAP / RESET to select AUTO LAP, then
PRESS VIEW.
- PRESS ST / STP or LAP / RESET to toggle ON / OFF, then PRESS VIEW.
- PRESS ST / STP or LAP / RESET to make changes, then
PRESS VIEW to move on to the next value and repeat.
- PRESS MODE to confirm and return to the RUNNING / CYCLING MODE setting sequence.
- PRESS MODE again to return to the SETUP OPTIONS MENU.
SETTING INTERVAL MODE
The New Balance NX950 GPS Runner’s Interval Training Mode has up to 6 independent settable segments,
which can be set to either a specific length of TIME or a specified DISTANCE. You can also set the intensity level
for each segment (REST > WALK > JOG > RUN > SLOW > MEDIUM > FAST, based on your training prgram.
Each segment counts down to zero and automatically advances to the next segment.
PREVIEW > REPEAT > STEPS
- PRESS MODE until you enter SETUP MODE.
- PRESS ST / STP or LAP / RESET to select INTERVAL, then
PRESS VIEW.
Previewing the Program
- From the INTERVAL setting, PRESS ST / STP or LAP / RESET to select PREVIEW, then PRESS VIEW.
- PRESS ST / STP or LAP / RESET to view STEPS 1-3 and STEPS 4-6.
- PRESS MODE to return to the INTERVAL setting sequence.
Setting Repeats
- From the INTERVAL setting, PRESS ST / STP or LAP / RESET to select REPEAT then
PRESS VIEW.
- PRESS ST / STP or LAP / RESET to select the number of times you want the INTERVAL TIMERS
to REPEAT (1-99) or select FOREVER REPEAT..
- PRESS MODE to confirm and return to the INTERVAL setting sequence.
Setting Steps
- From the INTERVAL setting, PRESS ST / STP or LAP / RESET to select STEPS then
PRESS VIEW.
- PRESS ST / STP or LAP / RESET to select the STEPS that you wish to adjust, then
PRESS VIEW.
- PRESS ST / STP or LAP / RESET to toggle ON / OFF, then PRESS VIEW.
- PRESS ST / STP or LAP / RESET to select the INTENSITY LEVEL, then PRESS VIEW:
REST > WALK > JOG > RUN > SLOW > MEDIUM > FAST
- PRESS ST / STP or LAP / RESET to select DISTANCE / TIME as the counting basis, then
PRESS VIEW.
- PRESS ST/ STP or LAP / RESET
PRESS VIEW to move on to INTERVAL
PRESS MODE to confirm and return Е В aa F EN qd <— a peat
° the setting sequence. ! Е = st я ОП
INTERVAL TIMERS i 10:00 1-3 Steps
- PRESS MODE to
return to the
SETUP OPTIONS
MENU.
Intensity Time
level
SETTING DAILY ALARM
The New Balance NX950 GPS Runner has a daily alarm function.
- PRESS MODE until you enter SETUP MODE.
- PRESS ST / STP or LAP / RESET to select DAILY ALARM, then PRESS VIEW.
- PRESS ST / STP or LAP / RESET to make changes & VIEW to move to next value:
ON / OFF > HOUR > MINUTE
- PRESS MODE to confirm and return to the SETUP OPTIONS MENU.
SETTING TIME / DATE
The New Balance NX950 GPS Runner can either be set automatically via the satellite's atomic clock (GPS Sync) or
to your specifications (manually).
TIME
- PRESS MODE until you enter SETUP MODE.
- PRESS ST / STP or LAP / RESET to select CLOCK,
then PRESS VIEW.
Setting Time via GPS Sync
NOTE: The GPS must be active for this option. Once GPS signals
are acquired, the watch will sync with the satellite signals to
update the time.
- From the CLOCK settings, PRESS ST / STP or LAP / RESET to
select GPS SYNC, then PRESS VIEW.
- PRESS ST/ STP or LAP / RESET to select ON, then
PRESS VIEW to proceed to the setting sequence.
TIME ZONE
- PRESS ST / STP or LAP / RESET to select TIME ZONE, then PRESS VIEW.
- PRESS ST / STP or LAP / RESET to adjust to the desire TIME ZONE, then
PRESS MODE to confirm.
NOTE: Set the time zone based on GMT (+12:00 to -12:00 in half hour increments) manually
or based on current GPS location automatically (AUTO).
DAYLIGHT SAVING TIME (DST)
- PRESS ST / STP or LAP / RESET to select DST, then PRESS VIEW.
- PRESS ST / STP or LAP / RESET to toggle ON / OFF the DST, then PRESS VIEW to confirm.
- PRESS MODE until you return to the CLOCK setting sequence.
Setting Time Manually
- From the CLOCK settings, PRESS ST / STP or LAP / RESET to select GPS SYNC, then PRESS VIEW.
- PRESS ST / STP or LAP / RESET to select OFF, then PRESS VIEW to proceed to the setting sequence.
TIME
- PRESS ST / STP or LAP / RESET to select TIME, then PRESS VIEW.
- PRESS ST / STP or LAP / RESET to make changes for the TIME, then
PRESS VIEW to move on to the next value:
SECOND > MINUTE > HOUR
- PRESS MODE to confirm.
DATE
- PRESS ST / STP or LAP / RESET to select DATE, then PRESS VIEW.
- PRESS ST / STP or LAP / RESET to make changes for the DATE, then
PRESS VIEW to move to next value:
YEAR > MONTH > DATE
- PRESS MODE until you return to the CLOCK setting sequence.
Setting Time Format (Select 24-Hour or 12-Hour Format):
- From the CLOCK settings, PRESS ST / STP or LAP / RESET to select FORMAT, then PRESS VIEW.
- PRESS ST / STP or LAP / RESET to toggle between 24-Hour and 12-Hour Format, then
PRESS VIEW to confirm.
- PRESS MODE until you return to Setup Mode.
SETTING SYSTEM INFORMATION
- PRESS MODE until you enter SETUP MODE.
- PRESS ST / STP or LAP / RESET to select SYSTEM, then PRESS VIEW.
SOUND > CONTRAST > UNITS > ABOUT
Setting Sound
- From the SYSTEM setting, PRESS ST / STP or LAP / RESET to select SOUND, then PRESS VIEW.
- PRESS ST / STP or LAP / RESET to toggle ON / OFF, then PRESS VIEW to confirm.
- PRESS MODE to return to SYSTEM setting sequence.
Setting Contrast
- From the SYSTEM setting, PRESS ST / STP or LAP / RESET to select CONTRAST, then PRESS VIEW.
- PRESS ST / STP or LAP / RESET to select the desired DISPLAY CONTRAST, then
PRESS MODE to confirm and return to SYSTEM setting sequence.
Setting Units
- From the SYSTEM setting, PRESS ST / STP or LAP / RESET to select UNITS, then PRESS VIEW.
- PRESS ST / STP or LAP / RESET to select METRIC or STATUTE (IMPERIAL), then PRESS VIEW to confirm.
- PRESS MODE to return to SYSTEM setting sequence.
- To return to the MAIN modes selection, PRESS MODE until you exit the SETUP MODE.
SETTING USER DATA
Please set-up all user information for the most accurate estimated calorie burn data.
- PRESS MODE until you enter SETUP MODE.
- PRESS ST / STP or LAP / RESET to select USER DATA, then PRESS VIEW.
- PRESS ST / STP or LAP / RESET to select the item to be changed, then PRESS VIEW:
GENDER > BIRTHDAY > WEIGHT
- For GENDER option, PRESS ST / STP or LAP / RESET to toggle MALE / FEMALE, then
PRESS VIEW to confirm and PRESS MODE to return to USER DATA setting sequence.
- For BIRTHDAY / WEIGHT options, PRESS ST / STP or LAP / RESET to make changes, then
PRESS MODE to confirm and return to USER DATA setting sequence.
- PRESS MODE to return to the SETUP OPTIONS MENU.
- Once all SETUP information is complete, PRESS MODE to return back to CLOCK MODE.
WORKOUT MODES
The New Balance NX950 GPS Runner has 3 workout modes: RUNNING, INTERVAL AND CYCLING MODES.
The RUNNING and CYCLING MODES have the same functionality, but when recording and viewing data, you will
be able to differentiate which exercise you were performing.
RUNNING / CYCLING MODE
- PRESS MODE until you enter either RUNNING or CYCLING MODE.
The 3-Line / 2-View display PROFILES that you set up are viewed in the RUNNING / CYCLING mode.
To toggle between the 2 displays,
PRESS VIEW.
US) <— UPPER <— UPPER
E 1:09. <— MIDDLE <— MIDDLE
US: LE] <— Lower <— LOWER
SCREEN 1 SCREEN 2
Starting a Workout / Recording Data
NOTE: If the GPS is not active, speed and distance data will not calculate. The only information
that will record with the GPS OFF is the total exercise time and lap times.
NOTE: Once you activate the exercise timer, the watch will automatically search for GPS signals.
In RUN Mode or CYCLING Mode:
- PRESS ST / STP to activate the workout timer.
- PRESS LAP / RESET to capture LAP DATA (the LAP time will appear in the display for 10 seconds).
- PRESS ST / STP to stop or pause the workout timer.
- PRESS LAP / RESET to reset the timer. The prompt “SAVE / CLEAR” will appear.
- PRESS ST/ STP or LAP / RESET to select SAVE or CLEAR the recorded data, then
PRESS VIEW to confirm and reset for the next workout.
INTERVAL MODE
Interval Training Mode has up to 6 independent
settable segments, which can be set to either a
specific length of TIME or a specified DISTANCE. | ЧП < TRAINING
- PRESS MODE until you enter INTERVAL MODE.
- PRESS ST / STP or LAP / RESET to toggle
through the interval displays.
INTERVAL
DISTANCE
< REMAIN
Starting a Workout / Recording Data
- PRESS VIEW to enter INTERVAL TRAINING screen.
- PRESS ST / STP to activate the interval timers.
- The watch will alert (beeping) you when the timer advances to the next interval (automatically).
- If you want to bypass a segment manually : PRESS LAP / RESET.
- If you want to review the distance travelled from your PREVIOUS segment : PRESS VIEW.
- If you want to STOP or PAUSE the timers : PRESS ST / STP.
- When you complete all INTERVALS & REPETITIONS : “WELL DONE” will appear in the display.
- PRESS MODE to end the training.
- PRESS ST / STP or LAP / RESET to select END + SAVE or QUIT the INTERVAL MODE, then
PRESS VIEW to confirm.
HISTORY MODE
You can view all recorded data in HISTORY MODE.
- PRESS MODE until you enter HISTORY MODE.
RECORDED WORKOUT DATA (Date / Time of Each Recording) > ERASE ALL > TOTALS
Review Stored Workout Data
NOTE: The data in the first position is the most recently stored workout record.
- PRESS ST/ STP or LAP / RESET to select the desire record, then PRESS VIEW.
- The symbol on the top left corner indicates the workout mode of this record:
RUNNING INTERVAL CYCLING
- PRESS VIEW to read the recorded WORKOUT DATA:
DISTANCE > TIME > AVERAGE PACE > AVERAGE SPEED > CALORIES
- PRESS ST / STP or LAP / RESET to view different LAP DATA, then PRESS VIEW to read the following
information of each lap:
LAP TIME > SPLIT TIME > LAP DISTANCE > LAP AVERAGE PACE >
LAP AVERAGE SPEED
NOTE: In INTERVAL MODE, the training phases are recorded as consecutive laps.
- PRESS MODE to return to the selected WORKOUT DATA.
- PRESS MODE again to return to the HISTORY OPTIONS MENU.
NOTE: Comprehensive data will be available for review via the Computer Software once the data is uploaded.
Review Total Workout Data according to Workout Modes
- PRESS ST/ STP or LAP / RESET to select TOTALS, then PRESS VIEW.
RUNNING / INTERVAL / CYCLING
- PRESS ST / STP or LAP / RESET to select the desired TOTAL WORKOUT DATA, then PRESS VIEW.
- PRESS VIEW to read the calculated TOTAL WORKOUT DATA:
TOTAL DISTANCE > TOTAL TIME > TOTAL CALORIES
- PRESS MODE to return to TOTAL WORKOUT DATA setting sequence.
RESET
- PRESS ST/ STP or LAP / RESET to select RESET ALL, then PRESS VIEW.
- PRESS ST / STP or LAP / RESET to toggle YES / NO, then PRESS VIEW to confirm.
- The prompt (y ) will appear and return to the TOTAL WORKOUT DATA setting sequence.
- PRESS MODE to return to the HISTORY OPTIONS MENU.
Delete Stored Workout Data
NOTE: IF YOU DELETE DATA FROM THE WATCH BEFORE YOU UPLOAD TO THE COMPUTER, ALL
INFORMATION WILL BE LOST. ALTERNATIVELY, YOU CAN ‘FAST DELETE’ THE DATA FROM THE WATCH
VIA THE COMPUTER SOFTWARE.
- PRESS ST / STP or LAP / RESET to select ERASE ALL, then PRESS VIEW.
- PRESS ST / STP or LAP / RESET to toggle YES / NO, then PRESS VIEW to confirm.
- The prompt (ay) Will appear and return to the HISTORY OPTIONS MENU.
DOWNLOAD WATCH DATA: PC INSTRUCTIONS
After you have recorded the WORKOUT DATA with your watch, you can download your data and track your
results with the New Balance NX950 GPS Runner Computer Software.
PC Requirements: Windows® XP or newer, minimum 512 MB of RAM; minimum 200 MB of free hard drive
space; CD-ROM drive; Built-In USB Port.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Macintosh® Requirements: Mac® OSX v 10.5.8 or newer, Built-in USB Port.
Macintosh, Mac, iPhone and iPod Touch are trademarks of Apple, Inc., registered in the US & other countries.
Please visit www.nbmonitors.com to download GPS software and view additional information.
Download Software
Please download the New Balance Sports Monitors GPS System link found on the
New Balance Sports Monitors website: www.nbmonitors.com.
You will be prompted to download the necessary software onto your computer to operate the computer portion
of the NX950 GPS Runner. Once the software has been downloaded, connect the charging cable to your
watch and plug into a USB port on your computer. With the watch connected to the computer, open (run) the
software.
Set Up User Name and Login
Upon entering the Computer Software, you will be prompted to create a USER NAME and LOGIN.
- CLICK the ADD button and type your USER NAME.
- CLICK LOGIN to advance into the software system.
Login
Data Path
C\Documents and Settings\All Userstd pplication Data
Ez
B
| Reset to default
|
Login | | Add | |
Remove user |
Click through the TABS to familiarize yourself with the Software:
FILE > VIEW > USER > DATA TRANSFER > PATH > SETTING > HELP
NOTE: Multiple USERS can share the same PC software system. To ADD users or SWITCH users,
CLICK on the USER tab and select accordingly.
Download Watch Data
Transfer the watch data to the PC Software via the DATA TRANSFER TAB.
- CLICK on DATA TRANSFER, then
CLICK on RECEIVE WATCH DATA.
The watch will transmit your data into the software system.
Once the watch data has fully downloaded, the
DATA TRANSFER box will disappear from the screen.
Reading data...
All WORKOUT DATA will appear in the screen for review and
process tracking. The MAP will show the route of your
exercise routine and pertinent exercise data will display in the
graphs and charts.
Cancel
Data transfer
To view LAP DETAILS, CLICK on the SHOW LAP DETAILS TAB.
To view COMPARATIVE exercise data for the WEEK, MONTH, YEAR , CLICK on the REPORT TAB.
FE Yor Var Cab bad: Cru Help CMA
i 3
2 4 5 6 7 6 %
40 41 13 13 14 15 18
7 Ч о нон ов
“он ог H
И CON 13-51-00
HI if Eire tra Dg
a SET - CC OO DO
Setting Manager
Map Tate н
As mentioned earlier, you can revise the RUNNING/CYCLING PROFILES, USER DATA and
UNITS OF MEASURE via the SETTING MANAGER tab.
- CLICK on DATA TRANSFER, then CLICK on RECEIVE WATCH DATA.
VIEW SETTING > USER DATA > UNIT
- Revise all data as needed, then PRESS WRITE SETTING TO WATCH.
Watch configuration
view setting | User data | Unit
Profile
Running
Data view 4 Data view 2
Workout Time | | Time of Day +
Distance * | | Calorie +
Pace Current » | Pace Ava. `
| Reset to default —]
Read setting from watch
| Write setting to watch
SETTING TAB > OPTIONS: Review the software OPTIONS and set accordingly.
NOTE: If you activate the AUTO-CLEAR MEMORY box, this prompts the software to DELETE all WORK-
OUT DATA from your watch upon DATA TRANSFER. This is not recommended until you are comfortable
using both the watch and PC software.
For more details on the New Balance NX950 GPS Runner and the computer software system,
please visit our website: www.nbmonitors.com
Warranty and Service
Warranty and Service information regarding your Limited Two Year Warranty
can be found at the New Balance Sports Monitors website:
www.nbmonitors.com / (800) 446-7587 / [email protected]
New Balance Sports Monitors, A Division of Implus Corporation.
2001 T.W. Alexander Drive / Box 13925
Durham, NC 27709-3925
Printed and Produced in PRC.
©2013 Implus Corporation. All Rights Reserved.
new balance =5
Authorized Licensee of New Balance Athletic Shoe, Inc.
New Balance and Flying NB are registered trademarks of New Balance Athletic Shoe, Inc.
RoHS (E X
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement