Operation Manual
3-AXIS
SHDX-755AIDN-B
SHDX-755AIDN-W
SSDX-742AI-B
SSDX-742AI-W
SHDX-755AIDN-BP
SHDX-755AIDN-WP
SSDX-742AI-BP
SSDX-742AI-WP
Operational Manual
AVAI 3-AXIS Dome Color Camera
Please read the Operational Manual
before attempting to use this product.
FEATURES
SHDX-755AIDN-B / SHDX-755AIDN-W
SHDX-755AIDN-BP / SHDX-755AIDN-WP
z 1/3” Sony Super HAD CCD
z 550 TV Lines, HQ-1 DSP
z 2.9mm~10.0mm Aspherical Auto Iris Lens
z 0.25 Lux @ F1.2
(Color mode automatically switches to
B/W mode under 1.0 Lux)
z 3-AXIS design for any angle
z Day & Night Feature with Adjustable on/off Switch
z 12V DC
SSDX-742AI-B / SSDX-742AI-W
SSDX-742AI-BP / SSDX-742AI-WP
z 1/3” Sony Super HAD CCD
z 420 TV Lines
z 2.9mm~10.0mm Aspherical Auto Iris Lens
z 0.15 Lux @ F1.2
z 3-AXIS design for any angle
z 12V DC
DIMENSIONS (Unit: mm)
*Day & Night Feature Available Only for SHDX Models
AVAI = Aspherical Vari-Focal Auto Iris
P = PAL Version
SHDX-755AIDN-B(W)_SSDX-742AI-B(W)_rev08212008
NOMENCLATURE AND FUNCTION
1. FAR / NEAR
2. WIDE / TELE
3. DC LEVEL
The VR for adjusting the IRIS level of Auto Iris Lens.
4. CONTROL SWITCHES
Switch 1. D&N: Day & Night Mode (Color / D&N Switch) (SHDX Models)
Switch 1. AES: Automatic Electronic Shutter (AES / OFF Switch) (SSDX Models)
Switch 2. BLC: Back Light Compensation (BLC / OFF Switch)
Switch 3. AGC: Automatic Gain Control (AGC / OFF Switch)
Switch 4. Flickerless (FL / NOM Switch)
5. VIDEO CONNECTOR
This is an output for connection to a video monitor, etc (75 ohms).
6. POWER INPUT TERMINAL
Connect the power supply of 12V DC.
CONTROL SWITCH OPERATION
(1). Color / D&N (SHDX Models)
Color: Color mode. (Normal position)
D&N: Day and Night Switch. Color mode automatically switches to B&W mode under 1.0 Lux.
(1). AES/OFF (SSDX Models)
AES: Automatic Electronic Shutter. The range of shutter speed from 1/60sec (1/50sec) to 1/100,000sec. This mode is
employed for using a manual iris lens.
OFF: AES OFF. The shutter speed is 1/60sec (1/50sec).
When an auto iris lens is applied, AES should be off.
(2). BLC/OFF
BLC: Back Light Compensation. When the object is dark by strong light (sunlight etc….) as (Fig.2-1), please turn on BLC to
make object become bright as (Fig.2-2).
OFF: BLC OFF. (SHDX Models)
OFF: BLC OFF. (SSDX Models)
(3). AGC/OFF
AGC: Automatic Gain Control. The level of gain
Varies from 0 to 26dB.
OFF: AGC OFF. The level of gain is fixed at 0dB.
(4). FL/NOM
FL: Flickerless. In FL mode, the shutter speed is 1/100sec. (NTSC system) / 1/120sec. (PAL).
If choose FL mode, [AES] switch should be off.
NOM: Normal position.
SHDX-755AIDN-B(W)_SSDX-742AI-B(W)_rev08212008
SPECIFICATIONS
Model
TV System
Image Sensor
DSP
Total Pixels
Video Output
Resolution
Minimum
Illumination
S/N Ratio
Synchronization
Back Light
Compensation
SHDX-755AIDN-B(W) SHDX-755AIDN-BP(WP) SSDX-742AI-B(W) SSDX-742AI-BP(WP)
NTSC
PAL
NTSC
PAL
1/3” Sony Super HAD CCD
Sony HQ-1
Sony
811(H) x 508(V)
795(H) x 596(V)
537(H) x 505(V)
537(H) x 597(V)
1.0 Vp-p Composite, 75 ohms (BNC Connector)
550 TV Lines
420 TV Lines
0.25 Lux @ F1.2
Color mode automatically switches to
0.15 Lux @ F1.2
B/W mode under 1.0 Lux
More than 50dB
More than 48dB
(AGC OFF)
(AGC OFF)
Internal
ON/OFF Switchable
Auto Gain Control
Auto Electronic
Shutter
Day & Night
Flickerless
White Balance
Lens
Power Supply
Power
Consumption
Operation
Temperature
Storage Humidity
Dimension
Weight
ON/OFF Switchable
Auto
ON/OFF Switchable
Color / D&N Switchable
N/A
ON/OFF Switchable
AWB
2500°K ~ 9200°K
2.9mm~10.0mm Aspherical Auto Iris Lens
Lens Made in Japan
12V DC
2.0W (166mA)
1.8W (150mA)
14°F ~ 122°F / -10°C ~ +50°C
Maximum: 85%RH
4.90”(D) x 3.78”(H) / 124.4mm(D) x 96mm(H)
0.77lbs / 350g
*Specifications are subject to change without notice
LIST OF COMPONENTS
z
z
z
One (1) SHDX-755AIDN-B/SHDX-755AIDN-BP, SHDX-755AIDN-W/SHDX-755AIDN-WP, SSDX-742AI-B/SSDX-742AI-BP, or
SSDX-742AI-W/SSDX-742AI-WP Camera with video/power cable
Two (2) Screws
One (1) Operational Manual
* For any returns, please include all components listed above with original packaging in Resalable Condition.
Absolutely No Returns will be accepted if any component is missing/damaged or if any cable is cut or tampered with.
CAUTIONS
1. Never point the camera toward the sun
Do not expose the lens directly to the sun or to strong light as this may damage the pick-up device.
2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling could damage the camera.
SHDX-755AIDN-B(W)_SSDX-742AI-B(W)_rev08212008
3. Requires a proper operating environment
This camera is designed for indoor use. The allowable temperature range for operation of this camera is between 14°F ~ 122°F /
-10°C ~ 50°C and the allowable humidity is 85%RH maximum.
4. Clean the front face to the pick-up device
It is recommended that the pick-up device surface be cleaned before lens installation or whenever the lens is changed. Cleaning
should be done by using a chamois, a very fine soft cloth, lens tissue, or cotton tipped applicator and ethanol to carefully remove
any fingerprint or dust.
5. Check the power source voltage
The power source voltage should be within the specified range. (Camera must meet the specifications). Camera must be
connected to a surge protector at all times.
6. Objects and liquid entry
Never push objects of any kind into this camera as this may touch dangerous voltage points of short out parts that could result in
a fire or electric shock. Never spill any kind of liquid on the video product.
7. Servicing
Do not attempt to service this video product by yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all service to qualified servicing personnel.
8. Damage requiring service
Unplug this video product from the wall outlet and refer service to qualified servicing personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video product.
c. If the video product has been exposed to rain or water.
d. If the video product has been dropped or the cabinet has been damaged.
e. When the video product exhibits a distinct change in performance.
WARRANTY
OK-I USA Products are covered under warranty for one year from the date of purchase. The warranty will automatically be voided if
any of the following occurs:
1. Camera sticker is removed
If the camera sticker is removed, we will not be able to confirm any information regarding when and where the product was
purchased. We have no other way to verify the purchase record without the serial number on the camera sticker; therefore, it
should not be removed.
2. Camera is modified in any way
If the camera is scratched, damaged, or modified in a manner not described in this manual, the warranty will be voided
immediately. It is the customer’s responsibility to keep the camera in good condition.
3. Video or power cable is cut
The video cable and the power cable should not be tampered with. Cutting or modifying of the cables will result in termination of
the warranty.
SHDX-755AIDN-B(W)_SSDX-742AI-B(W)_rev08212008
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement