User`s Manual

User`s Manual
 PRIAND805
Android 4.0, 3D, Multimedia Stereo Mini Projector
with Wi-Fi
User's Manual
Please read this manual carefully before operating your projector
Catalog
Catalog
Licences 1
Safety Instructions 2
Preparations 7
Accessories 7
Opitional Extras 8
Parts and Components 9
Installation 10
- Installation Precautions 10
- Projection Distance per Screen Size 11
- Howto Install the Projector 12
Using a Tripod
Remote control 13
Using the projector 15
Watching projector 15
- Turning on the projector 15
- Focus and Position of the Screen Image 15
- Watching projector 15
Using Additional Options 16
- Adjusting Aspect Ratio 16
- Using the Keystone Function 17
- UsingtheInput List 17
ENTERTAINMENT 18
MEDIA 18
- Connecting USB Storage Devices 18
- Movie list 20
- Photo list 24
- Music list 25
- File list 26
3D FUNCTION 28
Before Watching 3D 28
- While Watching 3D 28
Requirements for Watching 3D Images 29
- To Use DLP-LINK (DLP-Ready) Type Glasses
30
Watching 3D Images 32
Customizing Settings 33
“ SET UP" Menu 33
Picture settings 34
Sound Settings 36
Time Settings 37
Opitions settings 39
Making Connections 40
Connecting to an HD Receiver, DVD, or VCR Player
41
- HDMI Connection 41
Connecting to a PC 41
- RGB connection 41
Connecting to the AV input 42
- Component Connection 43
Connecting to headphone 43
Andriod 44
Andriod specifications 44
How to use Andriod 44
- Entering WIFI Home Page 44
- Select or flip 44
- My Application 44
- Wi-Fi Settings 45
- Installation and removal procedure 45
- Languages and Inputs 45
Maintenence 46
Cleaning the projector 46
- Cleaning the projector lens 46
- Cleaning the projector Case 46
Specifications 47
1 Licences
Licences
As an A-class product, the projector may cause radio interference
Users shall take effective measures to deal with it.
O cauTion
* Image shown may differ from your projector.
* Your projector' s OSD (On Screen Display) may differ slightly from that shown
in this manual.
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS 2
Please take note of the safety instructions to prevent any potential
accident or misuse of the projector.
WARNING / CAUTION
AVERTISSEMENT
RISK OF ELECTRIC SHOCK, po NOT OPEN.
RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR.
{N
{N
The lightning flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’ s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point
within an equilateral
triangle is intended to alert
the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the
appliance.
WARNING/CAUTION
_ TO REDUCE THE RISK OF FIRE
AND ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN
| OR MOISTURE.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions
Indoor installation
A\ CAUTION
* Do not place the projector in direct
sunlight or near heat sources such as
radiators, fires, stoves, etc.
- This may cause a fire.
* Do not place flammable materials
such as aerosols near the projector.
- This may cause a fire.
e Do not allow your children to cling to
or climb up to the projector.
- The projector may fall down and cause
personal injury or death.
* Do not place the projector directly on
a carpet, rug or place where ventilation
is restricted such as a book shelf or closet.
- This may cause the projector's internal
temperature to rise and cause a fire.
e Do not place the projector close to
sources of steam or oil such as a
humidifier or kitchen counter.
- This may cause a fire hazard or an electric shock.
* Do not place the projector where it
might be exposed to excessive dust.
- This may cause a fire.
3 SAFETY INSTRUCTIONS
* Donotuse the projector in a damp
place such as a bathroom where it is
likely to get wet.
- This may cause a fire or an electric shock.
* Do not allow a tablecloth or curtain to
block the vents.
- This may cause the internal temperature
of the projector to rise andcause a fire.
The distance between the projector
and the wall should be more than 30
cm for ventilation purposes.
- Otherwise, this may cause the internal
temperature of the projector to
rise and cause a fire.
/\Caution
* When installing the projector on a
table, be careful not to place it near
the edge.Make sure that you use a stand
suitable for the size of projector.
Turn off the projector, disconnect the
power supply and remove all connections
before moving the projector.
- A damaged cord may cause a fire or an
electric shock.
Do not install the projector on an
unstable or vibrating surface such as
a vibrating shelf or tilted surface.
- It may fall and cause injury.
Be careful not to tip the projector over
When connecting external devices to the
projector.
- This may cause injury to persons or
damage to the projector.
Power
À Caution
The earth wire should be connected.
- Inappropriate earth grounding may
cause damage to the projector or
an electric shock when there is an
electrical surge.If the projector must be
installed at a place where earth grounding
is not possible, purchase a circuit breaker
and connect the projector to its wall
outlet.Do not ground the projector to the
gas pipe, water pipe, lightning rod,
or telephone line, etc.
The power plug should be fully inserted
into the wall outlet.- Unstable connection may
cause a fire.
Do not place heavy objects on the
power cord or place the cord underneath
the projector.- This may cause a fire or an
electric shock.
Never touch the power plug with a
wet hand.- This may cause an electric shock.
Do not connect too many devices to
the same power extension.
- Overheating may cause a fire.
Remove dust or contaminants around
power plug pins or wall outlets.
- This may cause a fire.
To turn off the main power, remove
the power plug, which should be positioned
so it is easy to access for operation.
SPECIFICATIONS 48
Supported Monitor Display
HDMI/DVI-DTV supported mode
Horizontal
Horizontal Vertical
Resolution (KHz) “y
640*350 | 31.468 70.09
720400 | 31469 70.08
640*480 | 31469 59.94
800*600 | 37.879 60.31
1024768 | 48363 | 11600
1152864 | 54.348 | 60.053
1280800 | 49.68 60
1360768 | 47712 | 60.015
12801024 | 63981 | 60.020
14001050 | 65317 | 59.979
16801050 | 65.3 60
Resolution Frequency Frequency
(kHz) (Hz)
720*480 31.469 59.94
31.5 60
720*576 31.25 50
1280*720 37.5 50
44.96 59.94
45 60
1920*1080 33.72 59.94
33.75 60
28.125 50
26.97 23.97
27 24
33.716 29.976
33.75 30.00
56.25 50
67.43 59.94
67.5 60
* If an invalid signal is input into the
projector, it will not be displayed
properly on the screen or a message
such as “No Signal” or "Invalid Mode”
will be displayed.
* The projector supports the DDC1/2B type
as the Plug & Play function (Auto-recognition
of PC monitor).
e PCsynchronization signal types supported:
Separate type synchronization.
yyIn PC mode, 1280 x 800 is recommended
for the best picture quality.
Component port connecting information
Signal Component
480i / 576i о
480p / 576p O
720p / 10801 о
47 SPECIFICATIONS
SAFETY INSTRUCTIONS 4
SPECIFICATIONS
Resolution (pixel)
1280 (Horizontal) x 800 (Vertical)
Aspect Ratio
16:10 (Horizontal:Vertical)
Panel size
0.45 inch
Projection Distance
(video size) 9.5 inch to 10 feet
Ratio of Upward Projection| 100%
Working Range of Remote | 10 feet
Video Input NTSC M/PAL-B, D, G, H, | /PAL N/PAL 60/SECAM
AC-DC Adapter 19V---,3.7A
Audio Output 1W + 1W
Height 1.45 inch (without foot) to 1.57 inch (with foot)
Width 6.4 inch
Depth 4.4 inch
Weight 15.6 oz.
USB Device 5 V, 0.5 A (Max.)
Temperature
Operation 32°F-104°F
Operation Storage -4°F-140°F
Environment Relative Humidity
Operation 0%-80%
Storage 0%-85%
/N\ CAUTION
Hold the plug firmly when unplugging.
- A broken wire in the cord may cause a fire.
Ensure the power cord or plug is not
damaged, modified, severely bent,
twisted, pulled, sandwiched or heated.
Do not use a loose wall outlet.
- This may cause a fire or an electric
shock.
Keep the power cord away from any
heating devices.
- The cord coating may melt and cause an electric
shock.
Place the projector where people will
not trip over or tread on the power
cord or plug to protect the power
cord and plug from any damage.
- This may cause a fire hazard or an electric shock.
Do not turn the projector on or off by
plugging in the power plug or unplugging
it from the wall outlet.
(Do not use the power plug as a
switch.)
- This may cause an electric shock or
damage to the projector.
Do not insert a conductor into the
other side of the wall outlet while the
power plug is inserted into the wall
outlet.
In addition, do not touch the power
plug immediately after itis disconnected
from the wall outlet.
- This may cause an electric shock.
Use only the official power cord.
- Otherwise it may cause a fire or an electric
shock.
When in Use
4A\ CAUTION
Do not place anything containing
liquid, such as a vase, flowerpot, cup,
cosmetics, chemicals, decorations or
candles, etc., on top of the projector.
- Possible fire, electric shock, or falling
may cause physical injury.
In the event that there is a big impact
to the projector or the cabinet is
damaged, switch it off, unplug it from
the wall outlet and contact an authorized
service center.
- Otherwise, this may cause a fire or an electric shock.
Do not insert pieces of metal such as
coins, hairpins or metal debris, nor
flammable materials such as paper or
matches into the projector.
- This may cause a fire or an electric shock.
In the event that liquid or a foreign
object falls into the projector, please
switch it off and unplug it from the
wall outlet and contact an HTP Service Center.
Otherwise, this may cause a fire or an electric shock.
When replacing a battery of the remote
control, make sure a child does
not swallow the battery. Keep the battery
out of reach of children.
- In the case of a battery being swallowed by a child,
please consult adoctor immediately.
Do not remove any covers except for
the lens cap. There is a high risk of
electric shock.
Do not look directly into the lens
when the projector is in use. The
strong light may damage your eyes.
When the lamp is on or has just been
turned off, avoid touching the air vent
or lamp because these will be very hot.
If there is a gas leak, do not touch
the wall outlet. Open the window for
ventilation. - A spark may cause a fire or burn.
Never touch the projector or power
cord during thunder or lightning.
- This may cause an electric shock.
Do not use the projector near an
electronic device which generates a
strong magnetic field.
Store the vinyl envelope used to pack
the projector in a safe place away
from children.
- It could cause suffocation if used
improperly
5 SAFETY INSTRUCTIONS
e Do not use 3D glasses if you do not
watch 3D. CLEAN
* Do not keep your hand on the projector
for a long time when it is running.
When you play a game by connecting A WARNING
a game console to a projector, it is
recommended that you maintain a Do not spray the projector with water
distance of more than four times the when cleaning. Do not allow water to
diagonal length of the screen. go into the projector or do not allow it
e Make sure that the length of to get wet.
connecting cable is long enough. - This may cause a fire or an electric shock.
* Otherwise, the product may fall
causing personal injury or damage to When there is smoke or a strange smell coming
the product. out from the projector or a foreign object falls
into the projector, please switch it off and unplug
it from the power outlet and contact HTP.
Л CAUTION - If not, this may cause a fire or an electric shock.
Do not place a heavy object on the
projector.
- It may fall down and cause physical
injury.
Be careful to prevent the lens from
heavy impact during transportation.
Do not touch the lens.
The lens may be damaged.
Do not use any sharp tools on the
projector such as a knife or hammer,
because this may damage the casing.
In the event that no image appears
on the screen, switch the projector
off, unplug it from the wall outlet and
contact an authorized service center.
- Otherwise, this may cause a fire or
an electric shock.
Do not drop an object onto the projector
or apply heavy pressure to it.
- This may cause injury to persons or
damage to the projector.
The distance between your eyes
and the screen must be around 5 -
7 times the diagonal length of the
screen.
- If you watch the screen at a close
distance for along time, your eye
sight may become worse.
Use an air spray or soft cloth or
cotton swab moistened with a lens
cleaning chemical or alcohol to
remove dust or stains on the front
projection lens.
/\ CAUTION
Contact your seller or the Service
Center once a year to clean the internal
parts of the projector.
- If you do not clean the contaminated
interior of the projector fora long
time, there may be a fire or damage
to the projector.
When cleaning plastic parts such as
the projector case, unplug the power
first and wipe with a soft cloth. Do
not spray with water or wipe with a
wet cloth. When cleaning the plastic
parts, such as the projector case,
do not use cleanser, automobile or
industrial shiner, abrasive or wax, benzene,
alcohol, etc., which can damage
the product.
- This can cause fire, electric shock or
product damage (deformation, corrosion
and damage).
MAINTENANCE 46
MAINTENANCE
Clean your projector to keep it in optimum condition.
Cleaning the Projector
Cleaning the Lens
If there is any dust or staining on the
lens surface, you must clean the lens.
Use an air spray or a cleaning cloth to
clean the lens.
To remove dust or stains, use an air
spray or apply a small amount of cleaning
agent onto a swab or soft cloth to
lightly rub the lens.
Please be aware that liquid may flow
onto the lens if the product is sprayed
directly onto the lens.
Cleaning the Projector Case
To clean the projector case, first unplug
the power cord.
To remove dust or stains, use only a dry,
lint-free, nonabrasive cloth to polish the
lens.
Do not use alcohol, benzene, thinners
or other chemicals, which may damage
the case.
45 ANDROID SAFETY INSTRUCTIONS 6
4 Wi-Fi setting OTHERS /N CAUTION
Unplug the power cord if the projector
PRESS SETTING BUTTON TO ENTER INTO WIFI A WARNING is not used for a long period
- Accumulated dust may cause
* Only a qualified technician can disassemble overheating, an electric shock from
or modify the projector. For corroded insulation and a fire from an
inspection, adjustment, or repair, contact electrical surge.
your seller or the Service Center. _
- Otherwise, this may cause a fire or Only use the specified type of battery
* Click need to delete the software icon, an electric shock. ~ Otherwise, this may cause an electric
. . . . shock caused by overheating and leakage.
it will delete dialogue interface.
Dispose of the used battery properly.
- Otherwise, this may result in
explosion or fire.
The correct method of disposal may
vary depending on your country
5 Installation and removal procedure or region. Dispose of the battery
* setting unknown source - pack according to the appropriate
= instructions.
Please use the GOOGLE MARKET program, A
If you install none GOOGLE MARKET recognition Е * Do not throw or disassemble the
program, please set the installation of the unknown o i battery. . a
source at "Settings" - "security": Click on the "uninstall , you can - Otherwise, this may result in fire or
delete the software. explosion due to damage to the
battery.
Always use batteries approved and
6 Language and Input certified by LG Electronics.
Select the language and common - Otherwise, this may result in fire or
input methodPlease use the "set" -" explosion.
language and input"
Store the battery away from metallic
objects, such as keys and paper clips.
Excess current may cause a rapid
increase in temperature, resulting in
fire or burns.
* Do not store the battery near any
heat source, such as a heater.
- This may result in fire or damage
the product.
*The installation program
Please download the different application software
from the Internet, must use the APK program,
download a good program, directly Click Install, Different users from different countries and
you can also from other storage The device Android regions, select and install his local input * Do not store it at temperatures higher
program (online; Download the program will be displayed method software, and do related settings. than 60 °C or in high humidity.
in the status bar, or Enter the toolbar Clickto download
software, click Install) * Switch the input method e Keep the battery out of reach of children.
- This may result in personal injury or
. | damage to the product.
When you click on any of the input box, you
can set your expected input method click
Make sure that the battery is installed
on the bottom right of the desktop.State bar correctly.
*Remove program of the keyboard label, will immediately -Incorrect battery replacement may
Enter the settings - "application", will appeara variety ofinstalled input methods cause fire.
set up. for your you choice.
TEE
i.
| Japaneses IME
Set up input methods
7 PREPARATION ANDROID 44
*Only DLP-300W, DLP-600W WITH ANDROID FUNCTION
P R F PA RATIO N ANDROID SPECIFICATIONS
Accessories ITEM DESCRIPTION
. CPU 1. 2Ghz
Check enclosed accessories. DRAM 512M DDR3
The picture may be different from an actual product.
NAND Flash 4G
( a WIFI SUPPORT 802. 11 b/g/n
eas USB 1 piece
- USB OTG 1 piece
set CPU SYSTEM Android 4.0
a, Support video |MPEG4, AVI. RM, RMVB, FIV, WMV, 3PG, MP4, TS, DAT, WKV, MOV
— Support audio |MP3, WMA, WAV, APE, FLAC, AAC. OGG
Support picture | JPEG, BMP, GIF, PNG
Support Text PDF, WORD. EXECEL. PPT. TXT
Language Chinese. English and other more language...
7 ® USING ANDROID
Remote Control User's Manual Guaranty Card
1 Using the Android, the signal source, press the S button.
Switch to Android, Android system into the main interface.
HDMI CABLE Composite Gender AC-DC Adaptor а м em
Ma Mi
24*C-29% 219-310 | 25%-37€
Cloud # Cloud ul Cloud
Internet surfing Flixster Мияс оп!пе
& — il Flixster = <
Power cord 2 Use qorp buttons to select items or flip 3Click on the "my application”, will appear
\ À all the procedure tool icons.
When connecting a cable to the HDMI or USB port,
it may not be connected properly if the size of jack to
the USB/HDMI portis too big.
Use a standard sized jack.
My application SETTING
=
A=10mm, B=22 mm
43 MAKING CONNECTIONS
Component Connection
You can enjoy vivid images when you
connect an external device with a RGB
IN port to the component port of the
projector. Press the S button on
the remote control to select YPDPr.
Connecting to the Headphones
You can listen to the audio through
a headphone
О
el=:239 Ora
PC-RGB Ls @
0598
00
|
OPITIONAL EXTRAS
PREPARATION $
To purchase optional extras, visit an electronics store or online shopping site or contact
the retail store where you purchased the product.
Without prior notice, optional extras are subject to change in order to improve the
performance of the product, and new accessories may be added.
-
Projector screen Tripod VGA Cable
3D glasses
Video Cable Audio CABLE (DLP-LINK or DLPReady
Type)
RGB to Component cable Component Cable
9 PREPARATION
Parts and Components
* The projector is manufactured using high-precision technology. You may, however,
see tiny black dots and/or bright colored dots (red, blue or green) that continuously
appear on the projector screen. This is a normal result of the manufacturing process
and does not indicate a malfunction. When powered on, the LED of the control panel
turns on.
* Power system initialization for about 10 seconds, press the red indicator light at the power button to let the
power on.
Back View Control Panel
Ea aa O Os
00006 Ne 000,6, )
020020200050 0202020200050
00000000000 00000009000
I
№ DL J ~~ =
Speacker
e—————Speacker
Tf Card
MICRO USB
Power in
Button Description
Ó (Lamp) Turns the projector on or off.
M (Menu) Selects or closes menus.
A, V, <, > Sets the function or moves the cursor
© (OK) Checks present mode and saves function changes
o
1. Due to the high temperature air coming out of the vents, do not get close to the vents.
2. Do not touch the lens when using the projector. The lens may be damaged.
You can connect the audio cable without
using a gender as shown in the illustration
above.
RGB OUT (PC)
AUDIO OUT
MAKING CONNECTIONS 42
Connecting to the AV
Connect the output ports of an external
device and the AVINPUT port of the
projector. Press the INPUT button to
select AV.
L
A/V OUT L
AUDIO OUT
41 MAKING CONNECTIONS
Connecting toan HD
Receiver, DVD, or VCR Player
Connect an HD receiver, DVD, or VCR
player to the projector and select an
appropriate input mode
HDMI Connection
With an HDMI cable, you can enjoy high
quality picture and sound. Press the
INPUT button on the remote control to
select HDMI.
Connecting to a PC
The projector supports Plug & Play.
A PC will automatically recognize the
projector and requires no driver to be
installed.
RGB Connection
Connect the PC output and the PC
video input port of the projector with the
RGB cable.
For audio signal, connect the PC and the
projector with an optional audio cable.
“
Q
AVIN о
-------
„”
^^ = = = =
Accessories
Opitional Extras
RGB OUT(PC) AUDIO OUT
PREPARATION
Installation
Installation Precautions
* Place the projector in a well-ventilated
environment.
—To prevent internal heat from building
up, install the projector in a wellventilated
place.
Do not place anything near the projector
as this may block its air vents.
If the air vents are blocked, the internal
temperature will increase.
—Do not place the projector on a carpet
or rug. If a projector model has
its inlet vent on its bottom, do not
block the vent and use the projector
on a leveled solid surface.
— Be sure to prevent foreign objects such as
paper debris from entering the projector.
— Leave an adequate distance (30 cm
or more) around the projector.
(CS Y
Do not place the projector in a hot or
humid environment.
- Do not place the projectorina
hot, cold, or humid environment.
(See56Page regarding operating
temperature and humidity.)
Do not place the projector in a place
where it will easily attract dust.
- This may cause a fire.
Do not remove any covers except for
the lens cap. There is a high risk of
electric shock.
The projector is manufactured using
high-precision technology. You may,
however, see tiny black dots and/
or bright colored dots (red, blue or
green) that continuously appear on
the projector screen. This is a normal
result of the manufacturing process
and does not indicate a malfunction.
The remote control may not work
in an environment where a lamp
equipped with electronic ballasts or
a three-wavelength fluorescent lamp
is installed. Replace the lamp with an
internationally standardized lamp for
the remote control to work normally.
11 PREPARATION
Projection Distance per Screen Size
1 Place the projector on a sturdy, level surface, together with the PC or audio/video
source.
2 Place the projector at an appropriate distance from the screen. The distance between
the projector and the screen determines the actual size of the image.
3 Position the projector so that the lens is set at aright angle to the screen. If the
projector is not set at aright angle, the image on the screen will be tilted and the
image quality will be poor. If the screen image is crooked, use the Keystone function.
(see page52)
4 Connect the power cords of the projector and the connected devices to the wall
outlet.
— DISPLAY
Projection distance (D)
Projection distance (D)
MAKING CONNECTIONS 40
»——— DISPLAY I
16:10 Screen
Screen Size (mm) Screen Width (Y) (mm) | Screen Height (X) (mm) | Projection Distance (D) (mm)
635/25 538 337 645
762/30 646 404 775
889/35 754 471 904
1016/40 861 539 1033
1143/45 969 606 1132
1270/50 1077 673 1292
1397/55 1185 741 1422
1524/60 1292 808 1550
1651/65 1400 875 1680
1778/70 1508 943 1809
1905/75 1615 1010 1938
2032/80 1723 1077 2067
2159/85 1831 1145 2197
2286/90 1938 1212 2325
2413/95 2046 1279 2476
2540/100 2154 1347 2584
MAKING CONNECTIONS
You can connect various external devices to the ports on the projector.
Computer/Notebook DVD VIDEO
TN
Digital Device
Headphones
MN —
\ 4
АО
— =
USB
HDMI - 41 page
Component - 43page
INPUT (AV) - 42page Game Console
RGB - 41page
Memory - 18page >— JR Pa
Headphones- 43page
39 CUSTOMIZING SETTINGS
SETUP Menu
1 Press the Setting button.
2 Usethe € or D button to select PICTURE
and press the OK button.
3 Usethe A or Y button to set up a desired
nen and press the OK button.
-To return to the previous menu, press the MENU
button.
4 Usethe< or ) button to adjust the settings.
5 When youare fi nished, press EXIT.
(Setting lg
=
The available option settings are described as follows.
Setting
Description
Language
Selects a desired Menu Language.
Initial settings
Resets all the projector settings to the factory default.
Menu Transparency
Selects menu transparency
Menu disappear time
Selects menu disappear time
Software update(USB)
Projector software update (USB)
PREPARATION 12
How to Install the Projector Using a Tripod
* You can install this projector using a camera tripod.
As shown below, you can mount the projector instead of a camera on the tripod.
» When stabilizing the tripod, we recommend using the locking bolt of standard size 4.5
mm or less. The maximum size allowed for the locking bolt is 5.5 mm. (If it is longer
than the maximum allowed size, it may damage the projector.)
O
сос
c=
>
>
сер
ас +
О ===
ce
UNC-14-20
o
The projectors is connected
To this part
13 REMOTE CONTROL CUSTOMIZING SETTINGS 38
REMOTE CONTROL 3D Mode SETTING
1. Press the Setting button.
2. Use the < or » button to select 3D mode
Open the remote control on the back of the battery compartment cover 3. Use the A or Y button to setupa desired
and follow the instructions to load the specified battery FO item and press the OK button. ————
-To return to the previous menu, press the MENU EA
(3D TE D 3D R&L
à €
button.
4. Use the dor » button to adjust all the settings.
5. When you are fi nished, press EXIT.
The available settings are described as follows.
Setting Description
3D mode | OPITION
STANDARD 2D
|
16.043 2D to 3D
@.
Android mode shortcut key L/ R MODE 3D
Under Android mode are:Settings.
ovie, Application, Browser shoricul
> »/D MODE 3D
AICHACH 3D depth | ADJUST 3D DEPTH
rs parameter mens (1) (5) le e o -3D DEPTH IS AVAILABLE ONLY WHEN 2D CONVERTING TO 3D
Ok key,confirmation
function < (ок) Direction ke 3D L/ R OPITION
Property key menu mode adjust patameter
Display the file property under
Android mode — =) Em
Mouse mode key
When In Android mode,press «||»
this key to enter mouse mode, —
press again to quit mode. MOUSE HOME
Main Menu key:
When in Android mode,press this
key to show main page.
Back to previous
operation
E e It work in TV or USB
mode.
37 CUSTOMIZING SETTINGS REMOTE CONTROL 14
TIME Settings eo ©
1 Press the SETTINGS button. (vou | [vos] [ow | [ow |
2 Usethe<{or > button to select TIME N
3 Use the A or V button to set up a desired
SLEEPING TIME
item and press the OK button.
- To return to the previous menu, press the MENU
button.
4 Use thed or)» button to adjust the settings.
5 When you are finished, press EXIT.
The available time settings are described as follows.
Setting Description
TIME ITEM
DATE
MONTH
YEAR
HOUR
MINUTE
SLEEP TIMER | The projector is turned off at the preset time.
Multimedia Mode Manual channel search Channel Edit
Red | [Sub Menu] — [Delete] Save Delete
Green Rename
Yel low [Confirm] Delete Move
Blue skip
— O CAUTION
* When using the remote control, the optimal remote range is less than
3 meters (left/right) and within a 30 degree arc of the IR receiver.
* For seamless operation, do not block the IR receiver.
®* When you carry the remote control in the portable bag, make sure that the
buttons on the remote control are not pressed by the projector, cables,
documents or any other accessories in the bag. Otherwise, it may
significantly reduce the battery life.
15 Using the PROJECTOR
Using the PROJECTOR
Watching Projector Watching Projector
Turning on the Projector
1 Connect the power cord correctly.
1 In Standby mode, press the POWER
button to turn the projector on.
2 Press the INPUT button and select
the input signal you want.
2 After waiting for a moment, press
the POWER button on the remote
control or the control panel.
(The light on the control panel will be 3 Control the projector using the following
turned on.) buttons while watching projector.
3 In the Language Selection screen,
select a language. Button Description
4 Select an input signal by using the VOL ot Adjusts the volume leve.
CUSTOMIZING SETTINGS 36
AUDIO Settings
1 Press the menu button.
2 Use the < or» button to select AUDIO
3 Use the 4 ory button to set up a desired DALANCE
item and press the OK button. , Auto voLUMN
- To return to the previous menu, press the MENU button. Surround sound
4. Use the «or p> button to adjust the settings. Equilibrium
4 When you are fi nished, press EXIT.
MA
The available audio settings are described as follows.
INPUT button on the remote control. Mute Mutes all sounds
Accesses the quick menu.
Focus and Position of the Screen Image Munu
(see page33)
When an image appears on the screen, 16:9/4:3
checkifit is in focus and fits the screen Resizes an image.
ly.
properly Keystone Adjusts Keystone. (see
pagel7)
4 Toturn the projector off, press the
POWER button.
Focus ring
9 To adjust the focus of the image,
rotate the focus ring.
SETTING DESCRIPTION
Sound Mode | Adjusts sound.
Option
standard Select when you want standard-quality sound.
Music Select when you listen to music.
Movie Select when you watch movies.
Sports Select when you watch sports events.
Customzing Adjust as per person prefer.
Balance Adjusts the balance of the left and right speakers.
Auto Volume | Automatically adjusts the volume level.
Surround sound
provides 5.1 channel stereo sound from two speakers.
Equilibrium
Makes the voice from the projector crisp and clear.
Equilibrium
Option
120Hz |120 Hz Frequency regulation
500Hz |500 Hz Frequency regulation
1.5KHz [1.5 KHz Frequency regulation
5KHz 5 Khz Frequency regulation
10KHz —|10 Khz Frequency regulation
35 CUSTOMIZING SETTINGS
Using the PROJECTOR 16
Setting
Description
Image Noise
Reduce the image noise
Flip Horizontal
mirror image flip horizontal
* It is not available when using auto keystone
Flip Vertical
mirror image flip vertical
* It is not available when using auto keystone
Keystone Correction
In order to prevent the screen image is in the shape of a trapezoid, width at the top of the
projector is not set at the correct angle screen when the trapezoidal correction will adjust
the image and the bottom
* It is not available when using auto keystone
Energy Saving
Adjusts brightness
Auto Keystone
When because the projector tilt and trapezoidal screen image, automatic trapezoidal
correction can automatically adjust when because the projector tilt and trapezoidal
screen image, automatic trapezoidal correction by automatic adjustment
OPTION
Open Automatically adjust the proportion of trapezoidal correction.
Close The manual adjustment of trapezoidal correction ratio.
Computer
SETTING
Through the automatic calibration between the projector and a plurality of
AUTO ADJUST | PC image signal is set inside the disharmony caused by the horizontal width
of not matching and image dithering, which provides the best picture quality.
Line position| L/R button to move image
Field position U/D button to move image
Phase Do some adjustments with this function
Using Additional Options
Adjusting Aspect Ratio - ZOOM:
Enlarges an image to fit the
screen width. The top and bottom of
the image may be truncated.
Resize an image to view at its optional
size by pressing RATIO button while you are
using the projector.
O CAUTION
* Some options may not be available
depending on input signals.
e You can also change the image size
by pressing MENU—VIDEO >ZOOM MODE
- FULL : Changes to the full screen Ouro
regardless of the aspect ratio.
* If you enlarge or reduce an image,
the image may be distorted.
— .Q, Resizes imagesto fit the
16:9: screen width.
Resizes images to the 4:3
4:3: aspectratio.
17 Using the PROJECTOR CUSTOMIZING SETTINGS 34
Using the Keystone
Function
h i f 1 1
becoming trapezoidal, Keystone adjusts Using the Input List PICTURE SETTING
the top and bottom width of the image
if the projector is not set at aright angle Using the Input List
to the screen.
1. Press the MENU button.
Because the Keystone function may 1 Press the INPUT or § button to access 2.Usethe «ог button to select Picture made customs
cause inferior screen image quality, use the input sources. 3.Usethe 4 ory button to set up a desired Colortemperature
this function only when itis not possible item and press the OK button. Noise reduction
to set up the projector at an optimal - The connected input mode appears -To return to the previous menu, press the ME re
angle. first. button. KEYSTONE
Energy savin
Input Source 4. When you are fi nished, press EXIT. pu Lys
Computer setting
KEYSTONE
1D ЛИ
HDMI2 The available picture settings are described as follows.
PC-RGB Setting Description
ANDROID Pi Selects one of the preset images or customizes options in each mode
Icture
d for the best screen performance.
mode You are also able to customize advanced options of each mode.
Picture mode
Vivid Maximizes the visual effect of video. Displays a crystal clear picture
by enhancing contrast, brightness, and sharpness e
1 Press the Key's A or Key's Ybutton 7 ‚ | |
to adjust the screen. Select an input signal using the INPUT OR S Standard Has the contrast, brightness and sharpness at normal levels.
button and the projector is switched — :
-Keystone can be adjusted from -40 only to the connected input mode. You Soft Optimizes the image for movie.
to 40. can use the OK button to . ОДО .
switch into connected input modes. Expert Adjusts the detailed image settings.
2 Press the MENU or EXIT button after adjustment
CONTRAST Increases or decreases the gradient of the video signal.
Adjusts the base level of the video signal to make the image brighter or
BRIGHTNESS | darker.
COLOR Adjusts the intensity of all colors.
Sharpness Adjusts the level of sharpness in the edge between the light and dark
areas of the picture. The lower the level is, the softer the image looks
Tint Adjusts the balance between red and green levels.
COOL COLOR
Perature WARM COLOR
EXERT Adjusts the detailed image settings.
Red Adjust the intensity of the red
Green Adjust the intensity of the green
Blue Adjust the intensity of the blue
Zoom mode] Adjust image’ s size ( see page 18 about Adjusting Aspect Ratio)
33 CUSTOMIZING SETTINGS
CUSTOMIZING SETTINGS
SETUP Menu
1 Press the menu button.
2 Use the < or» button to select MENU
3 Usethe A orV button to set up a desired
item and press the OK button.
4. Use the < or» button to adjust the settings.
5. When you are fi nished, press EXIT.
ENTERTAINMENT 18
MENU DESCRIPTION
=
ui PICTURE Adjusts the image quality for optimal viewing.
AUDIO Adjusts the sound quality and volume level.
TIME Time-related features.
3D MODE 3D MODEL SETTINGS
SETTING Customizes the advanced settings.
| o La.
uo © Qe
ENTERTAINMENT
MEDIA
Connecting USB Storage Devices |
To disconnect the USB storage device,
Connect a USB memory stick as shown
below. 1 Press EXIT ORm button to stop playing.
When a USB storage device is connected,
the USB adjustment screen appears. 2 Remove the USB device.
You cannot write or delete data on the
USB storage device.
O CAUTION
* After the USB storage device is
disconnected, it cannot be read.
Remove the USB storage device
and connect it again.
ENTERTAINMENT
USB MEMORY STICK
Connecting to Micro SD storage device
In the following ways to connect to the Micro SD memory stick.
Connect the USB storage device, there will be a USB adjusting screen.
You cannot write to or delete the USB data on a storage device.
a Micro SD
The gold contacts for Micro SD card inserted.
The above Micro SD card for multimedia and the Android share.
The following Micro SD card is specially for Android.
19
ENTERTAINMENT
Tips for Using USB Devices
Only a USB storage device is recognizable.
USB hubs are not supported.
A USB storage device which uses its
own driver may not be recognized.
The recognition speed of a USB
storage device will depend on each
device.
If a normal USB device does not
work, disconnect and reconnect it.
Please do not turn off the projector
or unplug the USB device when the
connected USB device is working.
The USB device or stored files may
be damaged.
Please do not connect the USB storage
device that has been manipulated
on the PC. The projector may
not operate properly or fail to play
files. Use a USB storage device which
contains normal music, photo, video,
or document files.
Please only use a USB storage device
formatted as a FAT16, FAT32, or
NTFS file system provided by Windows.
In case a storage device formatted
as a different utility program
is not supported by Windows, it may
not be recognized.
Please connect power to a USB storage
device which requires an external
power supply. If not, the device may
not be recognized.
Please connect a USB storage device
with a cable provided by the USB
manufacturer. When you use a cable
that is not provided by a USB manufacturer
or an excessively long cable,
the device may not be recognized.
Some USB devices may not be supported
or will not work properly.
If the length of a folder or file is too
long, the folder or file may not be
recognized properly.
The files in a USB storage device are
sorted in the same way as Windows
XP. Up to 100 English characters for
a file name are allowed.
The data of a USB device may be
damaged, so it is recommended to
backup any important files. Because
a user is responsible for data management,
the manufacturer is not
responsible.
It is recommended to use a USB
memory stick which is 32 GB or less
and a USB hard disk whichis 1 TB or
less. Any device with more than the
recommended capacity may not work
properly.
If a USB storage device is not working
properly, disconnect it and connect it
again.
If a USB external hard disk with the
power saving function does not work,
turn the hard disk off and on again to
make it work properly.
USB storage devices below USB 2.0
are supported as well. However, they
may not work properly in the movie
list.
3D FUNCTION 32
3D Image Playing Method
1. Select the 3D image file name, press the OK button.
2. Before watching 3D of RGB-PC, must button the auto adjust key on the remote control.
3. 3D setting is on page 38.
4. To watch 3D image by projectors, press the button on the glasses.
5. Adjust 3D image settings.
* To return to the general image, press 3D three-dimensional image button.
31 3D FUNCTION
SUPPORTED 2D TO 3D FORMAT
signal Horizontal frequency Field frequency Play video form
27.00 24
28.12 25 2D to 3D,S/S, T8:B,C/B
1080p 33.75 30
HDMI-DTV 56.25 2D to 3DS/STEBC/BESRI
1080 28.12 50 2D to 3D,5/5,T&B
720p 37.50 2D to 3D,S/S, T&B,F/S
OTHER - - 2D to 3D
1024x768 48.36 2D to 3D,S/S, T&B
HDMI-PC | 1920x1080 67.50 0 2D to IDS TEA CIBES RA
OTHER - - 2D to 3D
1024x768 48.36 60 2D to 3D,S/S, T&B
RGB-PC
OTHER - - 2D to 3D
27.00 24
28.12 25
1080 33.75 30
2D to 3D,S/S,T&B
Component 56.25
10801 28.12 50
720p 37.50
OTHER - - 2D to 3D
2D to 3D,S/S,T&B,C/B,F/S,R/I,
USB 1080p 33.75 30 СЛ
(Photo:S/S,T&B)
S/S:SidebySide, T&B:To p&Bottom,F/P.FramePacking,F/A:FieldAlternative
L/A:LineAlternative,S/SFull:SidebySideFull,C/B:CheckerBoard
R/IT:RowlInterleaving,C/1:Columninterleaving,F/S:SingleFrameSequential
ENTERTAINMENT 20
MOVIE LIST
In the Movie List, you can watch movies stored on the connected USB device.
Tips for Playing Video Files
Some subtitles created by a user may
notwork.
Some special characters are not supported
in subtitles.
HTML tags are not supported in subtitles.
Time information in a subtitle file
should be arranged in ascending
order to play the subtitle properly.
Changing font and color in subtitles
is not supported.
A language which is not specified
in the subtitle languages is not
supported. (see page30)
Subtitle files of 1 MB or larger are not
supported.
The screen may suffer temporary
interruptions (image stoppage, faster
playback, etc.) when the audio language
is changed.
A damaged video file may not be
played properly, or some functions
may not be available.
Video files created with some encoders
may not be played properly.
yyEither audio or video may only be
supported depending on the video or
audio packet structure of a video file.
Video files with higher resolution than
the maximum supported for each
frame may not be played properly.
Video files in formats other than the
ones specified above may not be
played properly.
Streaming files which include GMC
(Global Motion Compensation) or
Qpel (Quarterpel Motion Estimation)
is not supported.
Up to 10,000 sync blocks are supported
in the subtitle file.
Seamless playback is not guaranteed
for files encoded level 4.1 or higher in
H.264/AVC.
DTS audio codec is not supported,
Video files larger than 30 GB (Gigabytes)
are not supported.
Playing a video via a USB connection
that does not support high speed
may not work properly.
A video file and its subtitle file must
be located in the same folder. A video
file name and its subtitle file name
must be identical in order to display
the subtitle properly.
While watching a video using the
movie list function, you cannot adjust
the picture mode.
Trick Mode does not support other
functions than if video files do not
have index information.
Video file names that contain special
characters may not be playable.
21
ENTERTAINMENT
Supported Video Formats
Video
Codec
VC-1 Advanced Profile
Profile/Level Support
Advanced Profile @ Level 3 (e.g.720p60, 1080i60, 1080p30)
Only streams compliant to SMPTE 421M VC-1 standard are supported.
3D FUNCTION 30
Simple Profile @ Medium Level (e.g.CIF,QVGA)
To Use DLP-LINK (DLP-Ready) Type Glasses
1 While watching 3D images from the projector, press buttons on the glasses.
2 When you press the button, the glasses flicker to be synchronized with the 3D images.
(The flickering is a unique operation method of DLP-LINK type glasses. It may be
different depending on the glasses type.)
3 If the glasses flicker or problems occur while watching 3D, first turn the lights off to
make the room darker. Contact your projector seller for queries about the glasses.
Supported 3D input formats
ast VC-1 Simple ‚ Main Profile @ High Level (e.g.1080p30)
and Main Profiles Only streams compliant to SMPTE 421M VC-1 standard are supported.
. WMA Standard
ue WMA 9 Professional
Divx3. 11
Divx4
Video Divx5 Advanced Simple Profile (720p/ 10801)
Divx6
XViD Advanced Simple Profile (720p/ 10801)
: divx MPEG-1 Layer LII
MPEG-1 Layer III (Mp3)
Audio WMA Standard
WMA 9 Professional
mp4 Video H. 264 /AVC te acs Ee Pe) (e.9.720p60, 1080160, 1080p30)
. m4v MPEG-4 Part 2 Advanced Simple Profile(720p/ 1080i)
Audio HE-AAC HE-AAC-LC & HE-AAC
Video H.264 /AVC oy Profile 5 Е di (e.9.720p60, 1080160, 1080p30)
mkv Audio HE-AAC HE-AAC-LC € HE-AAC
Video H. 264 /AVC НЙ Profile НЕ ar (e.g.720p60, 1080i60, 1080p30)
ts MPEG—2 Main Profile O High Level (e.g.720p60, 1080160)
. trp MPEG-1 Layer I, II
. tp Audio |MPEG-1 Layer III (MP3)
HE-AAC HE-AAC-LC & HE-AAC
Video MEC
MPEG-2 Main Profile O High Level (e.g.720p60, 1080160)
. vob Audio LPCM
MPEG-1 LAYER I, II
. mpg Video MPEG-1
mé Audio MPEG-1 LAYER, II Only streams compliant configured properly for TS, PS or ES
Supported 3D formats
Signal HME, EC Frequency (Hz) Play the stereo image form
54.00 24
56.25 25 F/PL/A
67.50 30
1080p 27.00 24
28.125 25 S/S,T&B,S/SFull
33.75 30
HDMI 56.25 50 S/S, T&B
56.25 F/PF/A
10801
28.125 S/S, T&B,S/SFull
75.00 F/PL/A
720p 50
37.50 S/S, T&B,S/SFull
62.50 F/PL/A
576p
31.25 T/B,S/S,S/SFull
USB 1080p 33.75 30 S/S, T&B,C/B,MPO(Photo)
S/S:SidebySide, T&B:To p&Bottom,F/P.FramePacking,F/A:FieldAlternative
L/A:LineAlternative,S/SFull:SidebySideFull,C/B:CheckerBoard
R/T:RowInterleaving,C/1:Columninterleaving,F/S:SingleFrameSeguential
29 3D FUNCTION
Please check the following when using 3D glasses
Do not use 3D glasses as ordinary glasses, sunglasses or protective goggles.
- If you do so, this may cause injury.
Do not store 3D glasses in very hot or very cold conditions. If you do, this
may cause them to become distorted.Do not use distorted glasses.
Do not drop 3D glasses or allow them to come into contact with other objects.
- This can result in damage to the product.
The lenses of 3D glasses are easily scratched. Use a soft clean cloth when
cleaning them. - Foreign particles on the cloth may cause scratches.
Do not scratch the surface of the 3D glasses’ lenses with sharp objects or
wipe them with chemicals. - If the lenses get scratched, images may not look
normal when viewing3D.
Requirements for Watching 3D Images
*
*
— CAUTION `
o * Optimum viewing angle: Top/Bottom/Left/Right 9°
Optimum viewing distance: Between 9 ft and 16 ft
Recommended screen size: 40 inches
[SSS SSS SSS SS SS
Basically, Watching 3D videos should be done in dark room environments only.
For 3D watching, set the energy saving mode to Minimum.
° he pairing with the DLP-LINK glasses is affected by the intensity of light reflected from the screen.
Therefore, the pairing with DLP-LINK glasses may not work properly if the light reflected from
the screen is not bright enough, such as when the surrounding area is bright, the screen is
big, or the maximum energy saving mode is enabled.
* Some menus may not work while playing a 3D video.
* You can only watch a 3D video properly when the 3D video format option has been selected
on the projector.
ENTERTAINMENT 22
Supported Audio Files
No.
Audio Codec
Bit rate
Sampling rate Remark
1 |MP3 32 kbps — 320 kbps |32 kHz — 48 kHz
2 |MPEG 32 kbps — 448 kbps |32 kHz — 48 kHz
24 kbps — _
3 | AAC, HEAAC 3844 kbps 8 КН - 96 kHz
4 |CDDA 1.44 kbps 44.1 kHz
1.41 Mbps - Multi-channel : 44.1 kHz,
5 |LPCM 9.6 Mbps 88.2 kHz / 48 kHz, 96 kHz
Stereo : 176.4 kHz, 192 kHz
23 ENTERTAINMENT
Browsing Movie List
Play a video file stored in the connected
device.
1 Connect a USB storage device.
Use the dor» button to
select Movie List and press the OK
button.
ALE
@ Picture Music Movie
3 Use the, p>, AorV buttonto
select STORAGE DEVICE and press the OK
button.
4 Use the q or » button to
select HARDWARE DEVICE and press the OK
button.
5 Use PII button to play the video in the root directory
Piece.
Used. >. A orYbutton to move the cursor
to play the file, press the OK key to select,
Then press Pll button to play the selected file.
11 «>
a Pause Backward Forward The
3D Function 28
DESCRIPTION
Play, pause
Backward
Forward
The last movie
The next movie
Stop
Repeat
Setting
Play list
Movie message
Backward
Forward
Time up
Enlarge
0000000000000
Smaller
3D FUNCTION
3D technology uses different video frames for each eye to add depth to the video.
Before Watching 3D
ACAUTION
e If you view 3D images too closely for
a long period of time, it may cause blurred vision.
e If you watchthe projector or game
screen for a long time with 3D glasses
on, you may experience dizziness or eye fatigue.
e Ifyou are pregnant, a senior citizen, intoxicated, have heart
problems, or easily feel motion sickness, we recommend
that you do not watch 3D images.
e Because 3D images can be recognized as real, some
viewers may get surprised or overexcited.
e Donotwatch 3D images near fragile objects or any objects
that can be knocked over easily.
® Take care not to injure yourself as you may subconsciously
try to move away from the life-like 3D images.
© Prevent children of 5 years or younger from watching
a 3D video. It may impair the development of their eyes.
Warning about photosensitivity seizures
- Some users may experience a seizure or other abnormal
symptoms when they are exposed to a flashing light or
particular pattern from a video game or movie. If anyone in
your family has a history of epilepsy or has ever experienced
any kind of seizure, please consult your doctor before viewing
3D images.If you experience one of the followingsymptoms
while watching a 3Dvideo, stop watching the 3D video immediately
and take a rest.
- Dizziness, twitching of the eye or facial muscles, involuntary
movements,cramp, loss of consciousness,confusion, loss of
sense of direction,or nausea. If the symptom does not disappear,
please consult your doctor.
You can reduce the risk of photosensitive
seizures by taking the followingpreventive measures.
- Take a rest of 5 - 15 mins. for every
1 hour of viewing.
- If vision varies between each eye,
correct the variation before beginning
to watch a 3D video.
- Ensure that the 3D video is directly
in front of you, at eye level.
- You should stop watching if you
experience a headache, fatigue or
dizziness.
- Do not view 3D images when you
are tired orill.
/NCAUTION
Extra special care is required for children
watching a 3D video.
When Watching 3D Video
Watch 3D images within the optimum
viewing angle and distance.
If you are outside the viewing angle
or distance, you may not be able to
watch 3D images. You cannot view
3D images when you lie down.
You may see left and right images
overlapped during projector initialization
after it is powered on. It may take
some time for optimization.
It may take some time for the 3D
image look normal after you turn your
eyes away from the screen and look
back at the 3D image.
It may flicker slightly while watching
3D images under a 3 wavelength
lamp fluorescent light (50 Hz - 60
Hz) or near windows. If so, it is recommended
to block the sun light
with a curtain and to dim the lights.
The 3D glasses must be DLP-LINK
(DLP Ready) type.
You may not be able to watch 3D
properly if there is an obstacle between
the projector and 3D glasses.
yylnstall the 3D projector as far as possible
from other devices.
27 ENTERTAINMENT
4
5 Use Dll button to play the video in the root directory
6 Use< p> A Orv button to move the cursor
Use the or p-button to
select HARDWARE DEVICE and press the OK
button.
Piece.
to play the file, press the OK key to select,
Then press, button to play the selected file.
7 Press the OK key when playing can popup control panel.
ENTERTAINMENT 24
MOVIE LIST
33 a
Description
Adjust the screen ratio @ HOTA MUSIC MOVIE TEXT ®
forward to another page of the control panel
Moving picture to enlarge screen position.
DESCRIPTION
Usethe 4, » , A or Y buttonto
Track selection
Backward to the last page
select STORAGE DEVICE and press the OK
forward to another page of the control panel button.
Forward to the next page
8000060
Close control panel
The last text
The next text
Stop
Background Music
Play list
Text message
forward to another page of the control panel
Hidden control panel
8600090600090 08
forward to another page of the control panel
* When the audio file and the text is put in the same
directory, the background music will be on.
PHOTO LIST
You can see the photos stored on a connected device.
Supported Photo Files
4 Usethe «orp button to
PHOTO (*.JPEG) select HARDWARE DEVICE and press the OK
Baseline: 64-pixel (width) x 64-pixel button.
(height) - 15360-pixel (width) x 8640-pixel (height)
Progressive: 64-pixel (width) x 64-pixel
(height) - 1920-pixel (width) x 1440-pixel (height)
Only JPEG files are supported.
Non-supported files are displayed in the form of an icon.
An error message is displayed for
corrupted files or file formats that
cannot be played.
5 Use Bl button to play the video in the root
Corrupted files may not be displayed properly.
directory Piece.
It may take some time to view highresolution images
in full screen.
Browsing Photo List
You can see the photos stored on a connected
device.
1. Connecta USB storage device.
2. Use the < or» button to
select Photo and press the OK
button.
6 Use € ‚> , A or V button to move the cursor
to play the file, press the OK key to select,
Then press Pl button to play the selected file.
25 ENTERTAINMENT
DESCRIPTION
PALY, PAUSE
THE LAST PICTURE
THE NEXT PICTURE
STOP PLAYING
REPEAT PLAYING
BACKGROUND MUSIC
PLAY LIST
PICTURE MESSAGE
Clockwise rotation of 90 degrees
Counterclockwise rotation of 90 degrees
ENLARGE THE PICTURE
SMALLER THE PICTURE
Adjust the map position when enlarging the picture
FORWARD TO ANOTHER PAGE OF CONTROL PANEL
HIDDEN CONTROL PANEL
©606060086000 00000
[FORWARD TO ANOTHER PAGE OF CONTROL PANEL
* When the audio file and the pictures is putin the same
directory, the background music will be on.
MUSIC LIST
You can play audio fi les stored on the
connected device.
Supported Music Files
*.MP3
Bit rate range 32 Kbps - 320 Kbps
Sampling rate MPEG1 Layer 3:
32 kHz, 44.1 kHz, 48 kHz
Sampling rate MPEG2 Layer 3:
16 kHz, 22.05 kHz, 24 kHz
Browsing Music List
| Connect a USB storage device.
2 Usethe <or > button to select
Music List and press the OK button.
Ir
e PHOTO (Ta: MOVIE TEXT [
3 Use the<, », Aor Y button to
select the Removable DEVICE you want and
press the OK button.
4 Use the < or »button to
select the HARD DEVICE you want and
press the OK button.
ENTERTAINMENT 26
5 Use Bl button to play the video in the root directory
Piece.
Use or button to move the cursor
to play the file, press the OK key to select,
Then press Pll button to play the selected file.
7 Press the OK key when playing can popup control panel.
00:01:06/00:02:13
LHR BE |< DI E“ “
4 PAUSE sackwaro rorwarp THE LAST ONE THENEXTONE Stop REPEAT MUTE | 3
0000060000
00:01:06/00:02:13
DESCRIPTION
MUSIC MESSAGE
START PALYING TIME
FORWARD TO ANOTHER PAGE OF CONTROL PANEL
HIDDEN CONTROL PANEL
060066
FORWARD TO ANOTHER PAGE OF CONTROL PANEL
FILE LIST
DESCRIPTION
PLAY. PAUSE
BACKWARD
FORWARD
THE LAST MUSIC
THE NEXT MUSIC
STOP PLAYING
REPEAT PLAYING
MUTE
900000060060
PALY LIST
You can see document fi les stored on a
connected device.
Supported File Formats
File Viewer realigns a document, so
it may look different from what is
displayed on a PC.
For documents that include images,
the resolution may look lower during
the realigning process.
Ifthe document volume is big or it
has many pages, it may take longer
to load the document.
Unsupported fonts may be replaced
by other fonts.
BROWSING FILE LIST
1 Connect a USB storage device.
2 Use the orp buttonto
select File List and press the OK
button.
LL AE
@ PICTURE Music MOVIE TEXT >
3Usethe <, >. A or V button to
select the storage device you want and press the
OK button.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement