By Credo Infotech

By Credo Infotech
RSETI MIS OPERATING MANUAL
By Credo Infotech
User Manual
Version 2.1
© 2012 Credo Infotech. All rights reserved
Page 1
PREFACE .............................................................................................................................................. 3
1.
1.1
1.2
1.3
1.4
2.
2.1
2.2
2.3
2.4
3.
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.10
4.
4.1
4.2
4.3
4.4
4.5
INTRODUCTION................................................................................................................ 4
SYSTEM REQUIREMENT ............................................................................................................. 4
GETTING STARTED / NAVIGATE THROUGH MIS ........................................................................ 4
HOW TO LOGIN IN TO THE MIS ................................................................................................ 5
INTRODUCTION OF BUTTONS AND ICONS.................................................................................. 5
SETTINGS ............................................................................................................................ 6
HOW TO ADD USERS ............................................................................................................. 6
HOW TO UPDATE INFRASTRUCTURE DETAILS: ................................................................. 7
HOW TO ADD DIRECTOR/FACULTY TRAINING DETAILS ............................................................. 7
HOW TO ADD EMPLOYEES ....................................................................................................... 9
ACTIVITIES ...................................................................................................................... 10
HOW TO ADD IN HOUSE TRAINING PROGRAMS...................................................................... 10
HOW TO ADD CANDIDATE/TRAINEE IN TO A TRAINING PROGRAM ......................................... 11
HOW TO ADD CANDIDATE PHOTO USING WEBCAM: ................................................................. 13
HOW TO ADD BOARDING DETAILS OF A TRAINING PROGRAM. ................................................ 15
HOW TO ADD SETTLEMENT TO A TRAINEE AFTER FOLLOW UP ................................................. 16
HOW TO ADD CANDIDATE FEEDBACK: .................................................................................... 18
HOW TO ADD LAC MEETING DETAILS: ................................................................................... 20
HOW TO UPLOAD CANDIDATE DETAILS FROM EXCEL SHEET: ................................................... 21
HOW TO ADD PROSPECTIVE CANDIDATES ............................................................................. 23
HOW TO ADD CANDIDATES FROM PROSPECTIVE CANDIDATES: ............................................... 24
ACCOUNTS ........................................................................................................................ 26
HOW TO ADD BANK ACCOUNT DETAILS .................................................................................. 26
HOW TO ADD CURRENT BUDGET PERIOD................................................................................. 27
HOW TO ADD CASH BALANCE ................................................................................................ 27
HOW TO ADD CREDIT SLIPS................................................................................................... 27
HOW TO ADD DEBIT SLIPS..................................................................................................... 28
© 2012 Credo Infotech. All rights reserved
Page 2
PREFACE
Purpose of This Document
This user manual aims to familiarize you with some of the tasks and processes of the
MIS application.
Intended Audience
This document is intended for users at various RSETI’s, who are familiar with the
basic tasks and terminology of the application. It will enable you to understand the
details of some of the tasks that can be performed using MIS.
© 2012 Credo Infotech. All rights reserved
Page 3
1.
Introduction
RSETI MIS (Management Information System) has been designed and developed to help
RSETIs maintain their training and candidate details. This will also help the sponsoring
banks to track and monitor the performances of their RSETI’s. The MIS is an online
application and can be accessed with Username and Password provided to the RSETIs
and their controlling offices.
1.1
System Requirement

Windows 2000, Windows XP, Windows Vista, or Windows 7

Latest Browsers (Internet Explorer, Google Chrome, Mozilla Firefox)

Internet Connection with a minimum bandwidth of 256kbps
This user manual covers some of the tasks that can be performed using RSETI MIS.
1.2
Getting Started / Navigate through MIS
The MIS window includes standard Windows components. Of particular interest:

The Header Bar displays the Logos of the Sponsoring Organizations.

The Horizontal Toolbar contains the main menus of the tasks that
performing the most common tasks.

The Left Menu contains the sub menus of the Horizontal menu.

The Main Window Area displays information about the activities and
operations you are carrying out.
© 2012 Credo Infotech. All rights reserved
Page 4
1.3
Open
How to Login in to the MIS
Internet
Browser
(IE, Chrome, Firefox etc.) and Type
http://www.rsetimis.org/ in the address bar to access the MIS.
the
URL
The resultant screen will be as below.
Now, use the username and password provided to your Institution to login to the
system.
Note: the Password is case sensitive.
1.4
Introduction of Buttons and Icons
Add New Record
Delete Record
Edit Record
View Record
Home Button
Sign out / Logout Button
© 2012 Credo Infotech. All rights reserved
Page 5
2.
2.1
Settings
How to ADD USERS
Select SETTINGS from the horizontal menu and then click on Users from the
left menu and then selectUsers Listfrom the horizontal menu. Now, from the
above screen click on
to add more users.
Now, from the below resultant screen select the type of user you want to create
and also enter all the other relevant details in the fields and click on save.
* indicates mandatory fields
Edit User
You will be able to Edit the user by clicking on the
as shown below.
Delete User
You will be able to Delete the user by clicking on the
as shown below.
Note: Any details once deleted cannot be reverted back.
© 2012 Credo Infotech. All rights reserved
Page 6
2.2
How to UPDATE INFRASTRUCTURE Details:
Select SETTINGS from the horizontal menu and then click on Users from the
left menu and then selectINFRASTRUCTUREfrom the horizontal menu. Now,
from the above screen click on Edit to update infrastructure details. The edit
screen will be activated only after clicking the Edit link.
Update the relevant details and click on Save.
2.3
How to Add Director/Faculty Training Details
© 2012 Credo Infotech. All rights reserved
Page 7
Select SETTINGS from the horizontal menu and then click on Users from the
left menu and then select FACULTY TRAINING DETAILS from the horizontal
menu. Before adding the training details kindly ensure the below.
If you have already added the Director / Faculties you will be able to add their
training details.
Now, from the above screen click on Edit to update in training details.
You will be able to delete the training details by clicking Delete link.
Now you click on add Faculty training Details as shown below to add Training
details of other Faculties in your institute.
Now click Save to update the changes.
© 2012 Credo Infotech. All rights reserved
Page 8
2.4
How to ADD Employees
Select SETTINGS from the horizontal menu and then click on Employees from
the left menu. From the above screen click on
Employees.
as shown above to add more
Now, in below screen enter all the fields with relevant information about the
Employee and click on save.
*indicates mandatory fields
Edit Employee
You will be able to Edit the Employee by clicking on the
as shown below.
Delete Employee
You will be able to Delete the Employee by clicking on the
as shown below.
Note: Any details once deleted cannot be reverted back.
© 2012 Credo Infotech. All rights reserved
Page 9
3.
3.1
Activities
How to ADD In house Training Programs
Select Activities from the horizontal menu and then click on Inhouse
Programs from the left menu. From the above screen click on
above to add more Inhouse Programs.
as shown
Now, in below screen enter all the fields with relevant information about the
Program and click on save.
Note: The fields here are inter related, when you select an option from the dropdown the
next drop down will appear based on your previous selection.
In case you do not find the name of the program in the Program Sub Type then please
select the option OTHERS from the dropdown and type the Program Name.
Description is not mandatory, however in case you wish to add any relevant
information about the program it can be added here.
The Batch Number is usually auto generated; however it can be edited before saving
the program.
The Sponsor name is pulled from list of sponsors you have created through the
Settings menu.
The Total Trainees field will allow you to enter the number of trainees in that particular
training. This will freeze the No of trainees to this number and will not allow more
trainees to be added when adding trainees.
The Start Date and End Date are calendar fields; when you click on these fields a
calendar will appear from which you need to make a selection. As shown below.
© 2012 Credo Infotech. All rights reserved
Page 10
* indicates mandatory fields
3.2
How to ADD Candidate/Trainee in to a Training Program
Once you have added / created a New Training Program, you will be able to View or
ADD more candidates to the Training Program by clicking on either View or ADD as
shown in the above picture.
Clicking on ADD as shown in the above picture it will direct you to the screen as shown
below where you can enter information of a candidate and click on Save to save the
candidate; clicking on Save & Add More will save the candidate information and also
bring in a new application to add new candidate.
© 2012 Credo Infotech. All rights reserved
Page 11
View Candidate list of a particular training program .
Clicking on View will bring the list of all the candidates in that particular training
program. As shown in the below picture. You can go back to the Program list page by
clicking on the BACK button as shown below.
Further, from the above screen you will be able to View, Edit or Delete candidate
information.
View Candidate information
Click on
as shown in the above picture to view the detailed information about
the Candidate / Trainee as shown in the below picture.
© 2012 Credo Infotech. All rights reserved
Page 12
Edit Candidate information
By clicking the
as shown in the above screen the candidate / trainee screen
will be displayed in the edit mode.
3.3
How to add candidate photo using webcam:
From the Candidate Add / Edit page click on Take Photo from Webcam link
A pop up will appear as shown below,
Now click on Allow and the web camera will be activated. As show below, now click on
Take Photo button.
© 2012 Credo Infotech. All rights reserved
Page 13
A photo will appear as shown below; you can now click on Use this photo link or repeat
the process by clicking on Take photo button until a desired photo is captured.
Upon clicking of Use this Photo link you will be directed to the below screen.
© 2012 Credo Infotech. All rights reserved
Page 14
Now click on Save button at the bottom of the screen to save the photo on the
candidate profile.
3.4
How to ADD Boarding details of a training program.
Click on Activities>>Inhouse Programs to reach the list of programs and
then click on ADD [Boarding Details] corresponding to the training program, as
shown in the picture above. This will direct you to the screen as shown below.
On this screen, you will need to first enter the rates of the respective items, viz,.
Breakfast, Tea/Cofee, Lunch, Dinner, etc. as shown in the above picture.
Then in the bottom part of the screen you will need to enter the no of Trainees
/Candidate and No. of Guest Faculties that were available for Break Fast, Morning Tea,
Lunch, Afternoon Tea and Dinner. Once entered click on save.
For example:
© 2012 Credo Infotech. All rights reserved
Page 15
In a training program if there are 15 Trainees/Candidates and 2 guest faculties the entry
would look like in the screen below.
To enter subsequent day’s boarding information, Click on Settings>>Inhouse
Programs to reach the list of programs and then click on ADD [Boarding Details]
corresponding to the training program. Then click on Add Next Day button to add the
next day and there is a Delete Last Day button to delete the last day information. As
shown in the picture below.
3.5
How to ADD settlement to a Trainee after Follow up
Select Activities>>Inhouse Programs and for a particular training program for which
you want to add settlement details, click on View Candidates as shown in the picture
below.
Clicking on View will bring the list of all the candidates in that particular training
program. As shown in the below picture.
Now click on
[Edit button] for the candidate that you wish to add settlement details.
This will direct you to the edit page of candidate information. As shown in the picture
below.
© 2012 Credo Infotech. All rights reserved
Page 16
Now, Click on
Add Settlement as shown in the picture above to add settlement for a
candidate. This will direct you to the screen below.
You can also add settlement by following the below process
Select Activities>>Inhouse Programs and for a particular training program for which
you want to add settlement details, click on View Candidates as shown in the picture
below.
Clicking on View will bring the list of all the candidates in that particular training
program. As shown in the below picture.
© 2012 Credo Infotech. All rights reserved
Page 17
Now, Click on Add Settlement as shown in the picture above to add settlement for a
candidate..
Note: The status selection plays a very important role. Below are the different statuses
you can select.
1. Not Visited: This status is selected by default and remains until changed.
2. Settled - Service: The candidate has joined a wage employment / job, has no
interest in Self-employment / Business.
3. In progress – Apprentice: The candidate has joined as Apprentice/Trainee to
gain some experience and will start business after some time.
4. Settled: Select this status only after the candidate is settled; once this status is
selected and saved you will not be able to change it or add more details to
settlement page.
5. In Progress: Select this status when the candidate is in the process of setting up
his project/business. When this status is selected you will be able to change it
later and add more details to the settlement page.
6. No Progress: Select this status when the candidate is not sure of setting up his
project/business, however may setup something in 3-6 months. When this status
is selected you will be able to change it later and add more details to the
settlement page.
7. Wasted: Select this status when the candidate is sure of not setting up a project
/ business of his own. When this status is selected you will not be able to change
it later and add more details to the settlement page.
3.6
How to add Candidate Feedback:
Click on Activities on the Horizontal Menu and then click on Inhouse Program on the
left menu then click on View corresponding to a program as shown below.
© 2012 Credo Infotech. All rights reserved
Page 18
You will be directed to the below screen.
Now you can select appropriate values from the dropdown to capture feedback of the
trainees/candidates.
After capturing the feedback click on Save as shown below.
You can also add feedback for all the candidates and then click on Save All button as
shown below
© 2012 Credo Infotech. All rights reserved
Page 19
3.7
How to add LAC meeting Details:
Click on Activities on the Horizontal Menu and then click on LAC meetings on the left
menu as shown below.
Then to add Meeting click on add
as shown below.
You will be directed to the below screen.
Now u can add meeting details, first you select meeting date, name, and designation.
For particular Meeting more than 1 person can be added by clicking on
as shown
below. Enter the name under the Name filed and select their designation from the
dropdown.
In case you want to delete a person then click on
as shown in the above picture.
And then fill all details click on save button as shown below
© 2012 Credo Infotech. All rights reserved
Page 20
The entered details after saving will be displayed as below.
If you want edit details click on edit
If you what delete records click on delete
3.8
as show below
How to upload candidate Details from Excel sheet:
Click on Activities on the Horizontal Menu and then click on Upload Excel Cand. on the
left menu as shown below.
You will be directed to the below screen.
© 2012 Credo Infotech. All rights reserved
Page 21
From the Batch No. dropdown choose a batch no to upload details.
Once you choose the batch number, you will be prompted with the number of candidates
that are required to be added in to this batch as shown below.
Now click on browse to select the excel sheet, you will be directed to the below screen
Browse and choose your excel sheet, then click on open. From the resulting screen
select Upload as shown below. You can also click on cancel if you wish to discard the
changes and select a new file.
If the excel sheet contains any any blank column or Row (only Mandatory fields, Marked
in RED) an error message is shown as below
© 2012 Credo Infotech. All rights reserved
Page 22
Error message contains the details of the column and row that are blank; you can
correct these and upload the file again.
If your excel sheet are clear of all the errors and the candidates will be uploaded and
Upload successful message will be displayed as shown below
Note: if you choose batch no it shows required records (Ex.22 records required) the
excel sheet must have only 22 rows filled (excluding column name row), else the system
will not allow the upload.
3.9
How to ADD Prospective Candidates
Select Activities from the horizontal menu and then click on Prospective Candidates
from the left menu. From the above screen click on
Prospective Candidates.
as shown above to add more
Clicking on ADD as shown in the above picture it will direct you to the screen as shown
below where you can enter information of a prospective candidate and click on Save to
save the prospective candidate; clicking on Save & Add More will save the prospective
candidate information and also bring in a new application to add new prospective
candidate.
© 2012 Credo Infotech. All rights reserved
Page 23
Edit prospective Candidate information
By clicking the
as shown in the above screen the candidate / trainee screen will be
displayed in the edit mode.
3.10
How to Add Candidates from prospective candidates:
© 2012 Credo Infotech. All rights reserved
Page 24
Select Activities from the horizontal menu and then click on Training/Inhouse
Programs from the left menu. From the above screen, click on
to add from
Prospective Candidates List. Clicking on ADD as shown in the above picture, this will
direct you to the screen as shown below.
If you want to search candidates, you can use search prospective candidates as
shown below.
After searching you can select the candidates by selecting check box in the list as shown
below
After selecting candidates click on Add button as shown below.
The selected candidates will be moved to the program.
© 2012 Credo Infotech. All rights reserved
Page 25
4.
Accounts
This is a basic accounting module that has been provided as add on to the MIS. Below
are some of the operations that can be handled in this module.
4.1 How to add Bank Account Details
Click on Accounts on the Horizontal Menu and then click on Bank A/C on the left menu. You will be
directed to a screen as shown above.
Then Click on
to add more Bank Accounts. You will be directed to the below screen.
Enter all the relevant details and click on Save.
* indicates mandatory fields
Once the Bank account has been created, you will be directed to the Bank Account list page as
shown below. Now click on Add/Edit Balance, to add or edit opening balance of a particular bank
account.
Upon clicking of Add/Edit Balance you will be directed to a page as shown below. Now click on
to arrive at the below screen.
Now select the year and enter the amount and click on save.
© 2012 Credo Infotech. All rights reserved
Page 26
4.2 How to add current Budget period
Click on Accounts on the Horizontal Menu and then click on Bank A/C on the left menu. You will
be directed to a screen as shown below.
Now click on
to add/edit the Current Budget Period.
4.3 How to Add Cash Balance
Click on Accounts on the Horizontal Menu and then click on Cash Balance on the left menu. You
will be directed to a screen as shown below.
Now click on
to add/edit the Cash Balance.
4.4 How to Add Credit Slips
Click on Accounts on the Horizontal Menu and then click on Credit Slip on the left menu. You will be
directed to a screen as shown below.
Now click on
to add Credit Slip. Upon clicking you will be directed to the below screen where
you will be able to enter the details of the credit slip.
Search for Credit Slips
© 2012 Credo Infotech. All rights reserved
Page 27
You will be able to search for Credit slips of a particular date range. By
selecting the date and clicking on Search.
This action will get all the credit slips of a particular date range you have
selected.
4.5 How to Add Debit Slips
Click on Accounts on the Horizontal Menu and then click on Debit Slip on the left menu. You will be
directed to a screen as shown below.
Now click on
to add Debit Slip. Upon clicking you will be directed to the below screen where
you will be able to enter the details of the debit slip.
Once you have entered and selected the relevant items, click on Save.
Search for Debit Slips
You will be able to search for Debit slips of a particular date range. By
selecting the date and clickin g on Search.
This action will get all the Debit slips of a particular date range you have
selected.
© 2012 Credo Infotech. All rights reserved
Page 28
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement