L26456 orion move handbook
Owner Handbook
Orion Move
™
Owner Handbook
Orion Move
™
1
© Lanta Lighting™ 2006-2014. Terms Apply. All trademarks are the property of their respective owners. E&OE. All specifications and details are correct at time of print. Revision 1
Owner Handbook
Lanta Product Safety
• It is illegal and dangerous to shine a laser into audience areas, where the
audience or other personnel could get direct laser beams or bright reflections
into their eyes.
use & maintenance
You must read these warnings carefully because they include important
safety information about the installation, operation and maintenance of this
product. Follow all instructions to maintain Manufacturer Warranty and for your
own safety.
• It is illegal to shine any laser at aircraft.
• Never leave this device running unattended.
• Read all instructions in this User Manual and on the product carefully
BEFORE operating this device.
non interlocking housing warnings
• The latest version of this handbook can be found at www.lantalighting.com
• This unit contains hazardous voltages, moving parts and high power laser
emitters.
• All Lanta products can be used for indoor use. Under no circumstances must
these products be used outdoors unless stated otherwise.
• To prevent risk of fire or shock, do not expose products to rain or moisture.
• Do not open the laser housing to avoid potential exposure to unsafe levels of
laser radiation.
• Make sure there are no flammable materials close to the unit during
operation.
• The laser power levels, accessible if the unit is opened, can cause instant
blindness, skin burns, and fires.
• Clean the product with a clean and dry, non-abrasive cloth. Do not use
solvents or liquids to clean the product.
• There are no user replacement parts inside the product. Do not open the
product for any reason. This will invalidate your Manufacturer Warranty and
may impair the safety features of the product.
• Do not use if the product if you suspect it has been damaged in any way,
including being dropped, is malfunctioning, or has been exposed to liquids
or moisture. The unit must be repaired by an authorised service centre only.
Manufacturer Warranty is void if unit is opened or adapted in any way. Operator
safety may be compromised if this product is not operated and maintained
in accordance with the details contained in this Owner Handbook.
• This appliance must be earthed. Do not remove the earth connection in the
plug or any other location - it is essential for user safety.
• Power connection to the product is via a UK 240 Volt AC three-pin mains plug.
Do not remove or adapt this plug. If necessary, only replace the plug top fuse
with one of the same type, size and value.
• Be aware that products are mains powered and may be capable of
producing high voltages from its outputs and has mains voltages inside the
cabinet.
laser safety notes - where applicable
YOU MUST READ THIS LASER SAFETY INFORMATION
Laser light is many thousands of times more concentrated than light from
any other kind of light source and as so it poses a real danger to the sight.
This concentration of light can cause instant eye injuries, primarily by burning
the light sensitive portion at the back of the eye called the retina. Even if you
cannot feel “heat” from a laser beam, it can still potentially injure or blind you or
your audience. Even very small amounts of laser light are potentially hazardous
even at long distances.
Laser eye injuries can happen quicker than you can blink.
• Entertainment products split the laser beam into hundreds of smaller laser
beams that are radiated out at high speed. There is a misconception that
an individual laser beam is safe for eye exposure. This is not the case. This
product produces high levels of laser power - classified as Class 3B - before it
splits into multiple beams - defined as Class 3R levels. Many of the individual
beams are potentially hazardous to the eyes and should never be directed
into an audience at any time.
• Do not assume that because the laser light is moving, it is safe. It isn’t, and
because these beams are being moved by a mechanical device, it is
possible for that device to stop moving and then direct the laser beam
constantly at an individual. Since eye injuries can occur instantly, it is critical
to prevent the possibility of any direct eye exposure.
mains warnings
• Always make sure that the mains voltage you intend to use is within the
operating range of the product.
• Always unplug product from the mains supply before moving, cleaning etc.
• It is illegal to aim a Class 3R laser into an area where people could be
exposed, even below people’s eye level.
• Make sure you replace the fuse with another of the same type and rating.
• This product will be irrevocably damaged and the warranty invalidated if
connected to a power pack or other dimmer.
• Always install a laser effect to ensure that the entire laser light radiation is at
least 3 meters above the floor on which people can stand. It is very important
to test the laser before any public use.
• Make sure the mains cable is not crushed or damaged.
• Never disconnect the mains lead by pulling or tugging on the cable.
• Do not use if any defect is detected such as if the product emits only one or
two laser beams rather than the expected quantities as this could indicate
damage to the product and could allow emission of higher laser levels
above Class 3R.
• This appliance must be earthed. Do not remove the earth connection in the
plug or any other location - it is essential for user safety.
• Unplug the product from the mains during lightning storms or periods of
mains fluctuations. If the product is going to be unused for long periods,
unplug from the mains.
• Do not point lasers at any reflective surfaces such as windows, mirrors
and metal truss or other reflective fixtures as even laser reflections can be
hazardous.
• The operation of a class 3R laser show is only allowed if the show is controlled
by a skilled and well-trained operator, familiar with the data included in this
manual.
physical warnings
• Always secure the product to a fastening device using a safety chain.
• If the product appears to be malfunctioning or operating in an unexpected
manner, stop using the unit immediately and contact your supplier.
• The law is updated from time to time and it is the users sole responsibility to
understand the legal obligations and responsibilities in force at the time and
location of use.
• Never lift, move or carry the product by any other means other than the case
as a whole or handle if provided.
We recommend visiting the Government Health & Safety website
http://www.hse.gov.uk or search for “Controlling the radiation safety of display
laser installations” for further information.
laser warnings - where applicable
• Lasers are hazardous devices. Permanent eye injury and blindness is possible
if lasers are used incorrectly.
• Avoid direct eye contact with laser light.
• Never intentionally expose your eyes or others to direct laser light.
• This laser product can potentially cause instant eye injury or blindness if laser
light directly strikes the eyes.
2
© Lanta Lighting™ 2006-2014. Terms Apply. All trademarks are the property of their respective owners. E&OE. All specifications and details are correct at time of print. Revision 1
Owner Handbook
™
177mm
Orion Move
106
5m
m
m
95m
inside the box
Atmospheric Effects:
When you need special atmospherics effects, Lanta have everything from bubble
machines to fake snow, hazers and foggers. There’s also a range of fluids and
consumables specially designed to get the best from the range.
• 1 x Orion Move™
• Power Cable
• DMX Cable
specifications
Model Number
L26456
Light Source
8 x 9W CREE LEDs
Beam Angle
1.6°
Control
1, 12, 24 Channel DMX 512
control channels, LED display
Control
Connections
3 Pin Female XLR, 3 Pin Male XLR
IEC IN & OUT
Run Modes
Auto, DMX, Sound Active
Built in Program, Master Slave
Construction
Die Cast Steel
Power Requirement
240V AC 50/60Hz
Power Consumption
72w
Dimensions (mm)
1065 x 95 x177
Weight (kg)
8.7
Control Gear:
Lightweight and portable, Lanta Control Gear is robust enough to survive life on
the road and smart enough to control DMX kit whatever the venue. Our website can be found at www.lantalighting.com and is available for the
benefit of customers worldwide. Please consult for information, advice and
support on this and other high quality products from Lanta
unpacking & inspection
It is important that you carefully examine the packaging to ensure the product
has not been damaged during shipping. If you are satisfied the packaging
appears undamaged, carefully unpack the product. Please keep all of the
packing materials in case you need to transport the device, pass it on to a new
owner in the future or return it for some reason. Please examine the product
and accessories to ensure they have arrived with you in good condition and
show no sign of damage. If you suspect the product may be damaged,
DO NOT USE IT. Please notify the sender immediately for advice –
not the manufacturer.
safety information
All information regarding important safety information about the installation,
operation and maintenance of this product can be found at the back of this
handbook. Products from Lanta Lighting meet all required safety standards in
force at the time of manufacture and are fully compliant with them.
INTRODUCTION
manufacturer warranty
• This Manufacturer Warranty is valid in the UK only.
• Lanta Lighting warrants that this product is free from workmanship defects
and material failure during normal use and operation for a period of 12
months from first use or from original date of sale (whichever is the earliest)
providing all of the terms indicated in the warranty section have been fully
complied with.
• Expressly excluded is our liability for any directly connected or indirectly
connected item or items or any consequential loss associated with the failure
of the product howsoever caused.
• If the product has been opened, modified, tampered with, incorrectly
connected, used inappropriately or in conflict with the instructions herein,
or the product model or serial number has been damaged, removed,
tampered with, obliterated or made partly unreadable by any person or
persons, the Manufacturer Warranty is irrevocably null and void.
• No extension, adaption, alteration or modification to the terms of this
Manufacturer Warranty will be permitted, unless expressly authorised in
writing (excluding email and fax) by a Director of Lanta Lighting. Warranty is
transferrable during the Warranty period.
Congratulations on your purchase of a Lanta Lighting Product. Based in the UK,
Lanta are committed to providing high quality products at cost-effective prices
to the professional lighting market. Since the first product was launched in
2006, Lanta has established a reputation for reliability, common sense design
and customer support that has become the envy of others.
Other Lanta Lighting range include:
Professional Lighting:
From washes to floods, spots to projectors, LED technology now outperforms
traditional lights while at the same time requiring significantly lower power and
generating far less unwanted heat.
Performance Lasers:
Recent advances have reduced the costs of Lasers, made them more portable
and brought improved performance and reliability. With step and animation
lasers in multi and single colour formats for mobile DJs and static installs, Lanta
promise Lasers that won’t burn a hole in your pocket.
3
© Lanta Lighting™ 2006-2014. Terms Apply. All trademarks are the property of their respective owners. E&OE. All specifications and details are correct at time of print. Revision 1
Owner Handbook
Orion Move
operating modes
™
sound mode
There are distinct operating modes that are supported by this unit. To select,
use the “MODE” button to enter the menu. The “SETUP” button steps through
specific settings for each operating mode and the “UP” and “DOWN” buttons
chooses from the values available. Pressing the “MODE” button to go back a
stage on the menu or “SETUP” button to proceed through to additional options
sound
Press the “MODE” button until the display shows “SOUND”.
By pressing the “SETUP” then use the “UP” and “DOWN”
buttons you can adjust the sensitivity from “01” to “31”
slave mode
AUTO
slave
mode SETUP
up
DOWN
Press the “MODE” until the display shows “SLAVE” to enter into Slave mode.
auto run mode
settings
AUTO
settings
Press the “MODE” button until the display shows “AUTO”. The fixture will cycle
through the in-built programs. By pressing the “SETUP” button the display will
bring up some additional extras to the AUTO function.
Press the “MODE” until the display shows “SETTINGS” to enter into the settings
menu. By pressing “SET UP”, then “UP” and “DOWN” buttons you can adjust
each setting.
>Led
>Bar
“BL Time” adjusts the Back Light LCD Times from “ON” to “30s”.
“Adjust” to manually adjust the Electronic motor of the Left or Right bar
from “-999” to “+999”
LED OPTION:
Press “SETUP” enter to LED auto running parameter settings. You can choose
“e-Auto” or “e-Manul”.
“Reset”to restore the unit to the factory settings. Also by holding “MODE” and
“SETUP” before powering up the unit.
“e-Auto” press “SETUP” button for a menu to adjust the speed and frequency.
“SPEED” to adjust the auto running speed from 01-20
“FREQ” to adjust the flash speed from 00-20Hz
DMX mode
“e-Manul” press “SETUP” button for a menu to adjust the LED brightness (Gray)
and the flash speed.
“Gray” to adjust the LED BRIGHTNESS from 000-255.
“Freq” to adjust the FREQUENCY from 00-20Hz
dmx
Press the “MODE” until the display shows “SETTINGS” to enter into the settings
menu. By pressing “SET UP”, then “UP” and “DOWN” buttons you can adjust
each setting.
BAR OPTION:
Press “SETUP” enter to LED auto running parameter settings. You can choose
“m-Auto” or “m-Manul”.
“Address” adjusts the DMX address from “001” to “512”.
“Channel” Choose the amount of DMX Channels either “1-ch”, “12-ch” or
“16-ch”.
“m-Auto”to adjust the speed from 1-16.
“m-Manul” adjust the position of left and right bar.
“L-BAR” to adjust the LEFT side from 0-180°,
“R-BAR”, to adjust the RIGHT side from 0-180°
Dmx In
. . . . . . .
The LCD display will display “ Dmx In” when a DMX Lead is connected and
signal is being received correctly.
SHOW mode
SHOW
In this mode a variety of built-in show programs can be chosen. With the LED
Display reading “SHOW”, Press “SETUP”, then use the “UP” and “DOWN” buttons
step between “PROGRAM Show 1” & “PROGRAM Show 10”.
4
© Lanta Lighting™ 2006-2014. Terms Apply. All trademarks are the property of their respective owners. E&OE. All specifications and details are correct at time of print. Revision 1
Owner Handbook
Orion Move
™
16CH
DMX channel settings
dmx
CHANNEL
VALUE
Function
CH1
0-180
Left Bar 0 - 180°
181-255
no function
1CH
CHANNEL
CH1
VALUE
Function
CH2
0-255
LEft bar speed
0--19
NO FUNCTION
CH3
0-180
RIGHT Bar 0 - 180°
20-29
Show1
181-255
no function
30-39
Show2
CH4
0-255
RIGHT bar speed
40-49
Show3
CH5
0-255
LED 1 (LEFT BAR) 0 - 100%
50-59
Show4
ch6
0-255
LED 2 (LEFT BAR) 0 - 100%
60-69
Show5
ch7
0-255
LED 3 (LEFT BAR) 0 - 100%
70-79
Show6
ch8
0-255
LED 4 (LEFT BAR) 0 - 100%
80-89
Show7
ch9
0-255
LED 1 (right BAR) 0 - 100%
90-99
Show8
ch10
0-255
LED 2 (right BAR) 0 - 100%
100-109
Show9
ch11
0-255
LED 3 (right BAR) 0 - 100%
110-119
Show10
CH12
0-255
LED 4 (right BAR) 0 - 100%
120-139
NO FUNCTION
ch13
0-255
DIMMING
140-255
Sound active &
Sensitivty
0-9
no function
10-19
use channels 1 - 4
to adjust bar movement
20-29
Show1
12CH
LED Auto -
CHANNEL
VALUE
Function
30-39
Show2
CH1
0-180
Left Bar 0 - 180°
40-49
Show3
181-255
no function
50-59
Show4
CH2
0-255
LEft bar speed
60-69
Show5
CH3
0-180
RIGHT Bar 0 - 180°
70-79
Show6
181-255
no function
80-89
Show7
CH4
0-255
RIGHT bar speed
90-99
Show8
CH5
0-255
LED 1 (LEFT BAR) 0 - 100%
100-109
Show9
ch6
0-255
LED 2 (LEFT BAR) 0 - 100%
110-119
Show10
ch7
0-255
LED 3 (LEFT BAR) 0 - 100%
120-139
no function
ch8
0-255
LED 4 (LEFT BAR) 0 - 100%
140-255
sound active
ch9
0-255
LED 1 (right BAR) 0 - 100%
0-255
speed
ch10
0-255
LED 2 (right BAR) 0 - 100%
0-14
NO Function
ch11
0-255
LED 3 (right BAR) 0 - 100%
CH12
0-255
LED 4 (right BAR) 0 - 100%
ch14
ch15
ch16
strobe
5
© Lanta Lighting™ 2006-2014. Terms Apply. All trademarks are the property of their respective owners. E&OE. All specifications and details are correct at time of print. Revision 1
Lanta lighting is very focussed on saving the planet.
Our products are low energy and our packaging
is reduced to the minimum possible. We include
our handbooks and specification sheets as part of
our paper reduction programme. All our product
handbooks and spec sheets are available on-line.
In this way you always get the latest version,
available on any internet enabled device, at any
time of the day or night, anywhere on the planet!
www.lantalighting.com
© Lanta Lighting™ 2006-2014. Terms Apply. All trademarks are the property of their respective owners. E&OE. All specifications and details are correct at time of print. Revision 1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement