servicemanuals.net click here

servicemanuals.net click here
Thanks for your interest in
servicemanuals.net
Attached are a couple pages from the
manual so you can make sure if it what
you are looking for and so you can see the
quality of the manuals we provide.
We look forward to receiving your order.
To order, please go to
click here
FCC information
user manual
manual de usuario
RP5435
EN/E
It is important to read this instruction prior to using your new product for the first time.
Es importante leer este manual antes de usar por vez primera su euipo.
This Class B digital apparatus complies
with Canadian ICES-003.
Cet appareil numérique de la class B est
conforme à la norme de NMB-003 du
Canada.
CAUTION
Service information
This product should be serviced
only by those specially trained in
appropriate servicing techniques.
For instructions on how to obtain
service, refer to the warranty
included in this user manual.
Technical Information
Product: Clock Radio
Brand: RCA
Model: RP5435
Electrical Consumption
Power Supply: 120V ~ 60Hz
Power Consumption: 4 Watts
The descriptions and characteristics in
this owner’s manual are for the purpose
of general reference only and not as a
guarantee. In order to provide you with
the highest quality product, we may
make changes or modifications without
prior notice. The English version serves
as the final reference on all product and
operational details should any
discrepancies arise in other languages.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER
(OR BACK). NO USERS E RV I C E A B L E PA R T S I N S I D E . R E F E R S E RV I C I N G
TO QUALIFIED SERVICE
PERSONNEL.
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING
SIGN
ALERTING YOU OF
I M P O R TA N T
INSTRUCTIONS
A C C O M PA N Y I N G
T H E P R O D U C T.
1. Setting Time Zone
You may slide the TIME ZONE
selector at the back of the unit to
Eastern (EST), Central (CST),
Mountain (MST) or Pacific (PST)
(refer to the maps on the right).
2. Daylight Saving
You can slide the DST switch at
the back of the unit to turn on/
off in areas observing/ not
observing such time change.
WARNING: Please avoid playing
with these buttons after entering
the Clock/Alarm set mode.
Plugging In For Power
AC OUTLET POWER SUPPLY:
120V~60Hz
SEE MARKING ON BOTTOM / BACK OF PRODUCT
WARNING: TO PREVENT FIRE OR ELECTRICAL
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
IMPORTER
Comercializadora Thomson de
México, S.A. de C.V.
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación
Cuauhtémoc
C.P. 06700. México, D.F.
Telefono: 52-55-11-020360
RFC: CTM-980723-KS5
EXPORTER
Thomson Inc.
P.O. Box 1976
Indianapolis, IN 46206 - 1976
©2007 Thomson Inc.
Trademark(s) ® Registered
Marque(s) ® Deposée(s)
Marca(s) ® Registrada(s)
www.rcaaudiovideo.com
GEFAHR EINES
ELEKTRISCHEN SCHLAGS
Clock
Before You Plug for
Power
• Plug the unit into a different
wall outlet so that the unit
and the equipment receiving
interference are on different
branch circuits.
If these measures do not eliminate
the interference, please consult
your dealer or an experienced
radio/television technician for
additional suggestions. Also, the
Federal Communications
Commission has prepared a
helpful booklet, “How To Identify
and Resolve Radio TV Interference
Problems.” This booklet is
available from the U.S. Government Printing Office, Washington,
DC 20402. Please specify stock
number 004-000-00345-4 when
ordering copies.
For your records
In the event that service should be
required, you may need the model
number and the serial number. In
the space below, record the date
and place of purchase and the
serial number:
Model No.:
Date of Purchase:
Place of Purchase:
Serial No.:
Before you begin
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING
FLASH AND ARROWHEAD WITHIN THE
TRIANGLE IS A
WA R N I N G S I G N
ALERTING YOU OF
"DANGEROUS
VOLTAGE" INSIDE
THE PRODUCT.
This device complies with Part 15
of the FCC Rules. Operation is
subject to the following two
conditions: (1) This device may not
cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause
undesired operation.
In accordance with FCC requirements, changes or modifications
not expressly approved by
Thomson Inc. could void the
user’s authority to operate this
product.
This device generates and uses
radio frequency (RF) energy, and if
not installed and used properly,
this equipment may cause
interference to radio and
television reception.
If this equipment does cause
interference to radio or television
reception (which you can
determine by unplugging the
unit), try to correct the interference by one or more of the
following measures:
• Re-orient the receiving
antenna (that is, the antenna
for the radio or television that
is “receiving” the interference).
• Move the unit away from the
equipment that is receiving
interference.
Setting Clock
1. Slide the switch
/WAKE1/
WAKE2/ on the top of the
unit to clock position.
2. Press
REV or FWD
to set
the clock time. The time
decrements or increments will
follow by a faster rate when
you press and hold the
buttons. The “:” between hour
and minute time flashes when
you are setting the time. AM
or PM icon will also beside the
time.
/WAKE1/
3. Slide the switch
WAKE2/ on the top of the
position when
unit to lock
finished.
Battery Back-Up
Operation
This clock radio is equipped with a
memory holding system that can
be powered with 2 “AA” batteries
(included). The power failure
protection circuit will not operate
unless battery is installed. When
normal household power is
interrupted, or AC line cord is
unplugged, the batteries will
power the clock radio to keep
track of time and alarm settings
programmed into memory. When
the battery backup functions, the
digital display will not light,
however, the function of alarm
still occurs during the power
interruption if remaining battery
power is adequate. Normal
operation will resume after AC
power is restored so you will not
have to reset the time or the
alarm.
Install battery as follow:
1. Remove battery compartment
door (located at the bottom of
the radio) by applying thumb
pressure to the tab on battery
door and then lift the door
out and off the cabinet.
2. Insert 2 AA batteries
(included).
3. Replace the compartment
door.
Note: we recommend that you
replace the batteries every 2-3
years.
This unit allows two wake times to
be set.
1. Slide the switch
/WAKE1/
WAKE2/ on the top of the
unit to WAKE 1 or WAKE 2
position.
2. Press
REV or FWD
to set
the respective wake time. The
time decrements or increments
will follow by a faster rate
when you press and hold the
buttons. The “:” between hour
and minute time flashes when
you are setting the time.
3. Slide the switch
/WAKE1/
WAKE2/ on the top of the
unit to
position when
finished.
Selecting Wake Source
You may be woken up by radio or
alarm.
1. Select an AM or FM station
(see directions on “Radio”).
2. Set a wake time (see above
direction).
-
Wake
Wake
Wake
Wake
1
1
2
2
by
by
by
by
alarm
radio
alarm
radio
Checking Wake Time
Slide the switch
/WAKE1/
WAKE2/ on the top of the unit
to WAKE 1 or WAKE 2 position
to check the currently set wake
time.
Turning Off the Wake
Alarm or Radio
Press SNOOZE on the top of the
unit. The wake alarm or radio will
be switched off temporarily. The
alarm or radio will be on again
when the snooze period is over.
(see “SmartSnoozeTM Operation”)
To turn off the wake alarm or
radio completely, press OFF. The
wake alarm or radio will activate
again the next day unless you
switch off the Wake function (see
“Switching off Wake Function”).
OFF 1 or 2
3. Press WAKE –
repeatedly on the top of the
unit to select a waking mode.
Corresponding icon lights on
the front of the unit.
Limited Warranty
Limited Warranty (US)
What your warranty covers:
• Defects in materials or
workmanship.
For how long after your
purchase:
• One year from date of
purchase.
• The warranty period for rental
units begins with the first
rental or 45 days from date of
shipment to the rental firm,
whichever comes first.
What we will do:
• Provide you with a new, or at
our option, a refurbished unit.
The exchange unit is under
warranty for the remainder of
the original product’s warranty
period.
• Proof of purchase in the form
of a bill of sale or receipted
invoice which is evidence that
the product is within the
warranty period must be
presented to obtain warranty
service. For rental firms, proof
of first rental is also required.
Thomson Inc.
Product Exchange Center
11721 B Alameda Avenue
Socorro, Texas 79927
• Insure your shipment for loss
or damage. Thomson accepts
no liability in case of damage
or loss en route to Thomson.
• Pay any charges billed to you
by the Exchange Center for
service not covered by the
warranty.
• A new or refurbished unit will
be shipped to you freight
prepaid.
•
•
•
•
AUTO DIMMER – turns auto
dimmer function on or off.
TIME ZONE – slide to select time
zone corresponds to your location.
DST – turns daylight saving
function on or off.
AM/FM – selects between AM and
FM bands.
REV – sets time (decreases
value).
RADIO/AUX – selects radio or
AUX mode.
Right View
–VOLUME+ – adjusts volume.
OFF – activates and
WAKE –
sets wake function.
TUNING – selects radio frequencies.
/WAKE1/WAKE2/ – slide
switch to set Wake 1, Wake 2 and
clock time.
Power is fed to the
unit even when it is
not functioning. To cut
the power supply off,
the power cable must be
unplugged.
AUX IN – AUX input jack.
SLEEP – activates sleep function.
AM Antenna
Press RADIO/AUX to switch on
radio.
A built-in ferrite rod antenna
eliminates the need for an outside
antenna for AM reception.
Rotating the unit slightly may
improve reception of distant AM
stations.
Switching Band
Slide the AM/FM switch on the
back of the unit to select FM or
AM band.
Auxiliary Source
Tuning the Radio
Turn the TUNING knob on the
right of the unit to adjust radio
frequency. Radio frequency shows
on the display.
Clock time and radio frequency
are display on the display area at
the front of the unit. The display
brightness can be adjusted
automatically by analyzing the
intensity of surrounding light
sources.
The Built In Automatic Frequency
Control (AFC) works only on FM. It
helps reducing drift on FM
reception and keeping the radio
locked in on the FM station to
which it is tuned.
Switching Off Wake
Function
Press WAKE OFF 1 or 2
repeatedly on the top of the unit
until no wake mode icon shows
on the display.
SmartSnoozeTM is only
available when
/WAKE1/WAKE2/
lock
position.
is at the
When tuning in FM stations, you
may notice that the station you
are tuning can be well-tuned on
two or three nearby points on the
dial. Always tune carefully at the
loudest and clearest point.
Slide AUTO DIMMER on the back
of the unit to ON position to
activate the function.
Sleep Function
NAP Function
In sleep mode, you can set the
duration (up to 2 hours) before
the radio turn off automatically.
This function wakes you up after a
short period of time (from 10
minutes to 2 hours).
1. Press and hold SLEEP on the
top of the unit and use
REV or FWD
to set the
duration up to 2 hours. The
time decrements or increments
will follow by a faster rate
when you press and hold the
buttons.
Note: The radio will be
switched on.
2. To check the remaining
duration before the radio
turns off, press and hold
SLEEP.
3. To cancel the sleep function,
press SNOOZE or OFF.
1. Press and hold NAP on the top
REV or
of the unit and use
to set the duration up
FWD
to 2 hours (each press
decreases or increases duration
by 10 minutes).
2. The clock time shows after a
few seconds if no button is
pressed. NAP icon shows on
the display to indicate the
function is activated.
3. To check remaining nap time,
press NAP once to show the
time on the display briefly.
4. When the alarm sounds, press
SNOOZE to switch it off.
• To cancel the function before
the nap time ends, press and
hold NAP until no nap icon
shows on the display.
Set the “quiet” period as follow:
1. Press and hold SNOOZE.
REV or FWD
to set
2. Press
the quiet period. The time
decrements or increments will
follow by a faster rate when
you press and hold the
buttons.
Limited Warranty
Limitation of Warranty:
• THE WARRANTY STATED
ABOVE IS THE ONLY
WARRANTY APPLICABLE TO
THIS PRODUCT. ALL OTHER
WARRANTIES, EXPRESS OR
IMPLIED (INCLUDING ALL
IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE)
ARE HEREBY DISCLAIMED. NO
VERBAL OR WRITTEN
INFORMATION GIVEN BY
THOMSON INC., ITS AGENTS
OR EMPLOYEES SHALL CREATE
A GUARANTY OR IN ANY WAY
INCREASE THE SCOPE OF THIS
WARRANTY.
• REPAIR OR REPLACEMENT AS
PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER.
THOMSON INC. SHALL NOT BE
LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF
THIS PRODUCT OR ARISING
OUT OF ANY BREACH OF ANY
EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT.
THIS DISCLAIMER OF
WARRANTIES AND LIMITED
1. Connect your auxiliary source
(e.g. mp3 player) to the AUX
input jack on the right side of
the unit with the audio cable
supplied.
2. Turn on the unit and your
auxiliary source.
3. Press RADIO/AUX to switch to
listen to auxiliary source. The
AUX indicator on the front will
turn on. Press again to switch
back to listen to the radio.
Auto Brightness Control
Built-In AFC
Canadian time zones
Product Registration:
• Please complete and mail the
Product registration Card
packed with your unit. It will
make it easier to contact you
should it ever be necessary.
The return of the card is not
required for warranty
coverage.
•
Back View
Selecting Radio Mode
What your warranty does not
cover:
• Customer instruction. (Your
Owner’s Manual provides
information regarding
operating Instructions and user
controls. For additional
information, ask your dealer.)
• Installation and set-up service
adjustments.
• Batteries.
• Damage from misuse or
neglect.
• Products which have been
modified or incorporated into
other products.
• Products purchased or serviced
outside the USA.
• Acts of nature, such as but not
limited to lightning damage.
•
OFF – turns the unit on or off.
US time zones
This operation allows extra sleep
time after the wake function is
on. The alarm will be off by
pressing SNOOZE, NAP, SLEEP,
REV or FWD until the snooze
period is over. Snooze function
can be used repeatedly up to 30
minutes (default: 9 minutes). After
this, the wake function will turn
off until the next day.
•
Top View
Radio
SmartSnoozeTM Operation
•
General controls
Clock
The unit equips with
GRAD-U-WAKE
feature, the alarm tone
volume will increase
gradually to its maximum in
about 30 to 45 seconds.
•
• IF YOUR PRODUCT OPERATES
ON BATTERIES, adhere to the
following precautions:
A. Any battery may leak
electrolyte if mixed with a
different battery type, if
inserted incorrectly, or if all
batteries are not replaced at
the same time.
B. Any battery may leak
electrolyte or explode if
disposed of in fire or an
attempt is made to charge a
battery not intended to be
recharged.
C. Discard leaky batteries
immediately. Leaking batteries
can cause skin burns or other
personal injury. When
discarding batteries, be sure to
dispose of them in the proper
manner, according to your
state/provincial and local
regulations.
NAP – activates nap function.
Limited Warranty
How to make a warranty
claim:
• Properly pack your unit.
Include any cables, etc., which
were originally provided with
the product. We recommend
using the original carton and
packing materials.
• Include evidence of purchase
date such as the bill of sale.
Also print your name and
address and a description of
the defect. Send via standard
UPS or its equivalent to:
•
•
fallen into the apparatus, the
apparatus has been exposed to
rain or moisture, does not
operate normally, or has been
dropped.
ADDITIONAL SAFETY
INFORMATION
Apparatus shall not be
exposed to dripping or
splashing and no objects filled
with liquids, such as vases,
shall be placed on the
apparatus.
Always leave sufficient space
around the product for
ventilation. Do not place
product in or on a bed, rug, in
a bookcase or cabinet that
may prevent air flow through
vent openings.
Do not place lighted candles,
cigarettes, cigars, etc. on the
product.
Connect power cord only to
AC power source as marked on
the product.
Care should be taken so that
objects do not fall into the
product.
Do not attempt to disassemble
the cabinet. This product does
not contain customer
serviceable components.
SNOOZE – enters snooze mode
where the alarm will quiet but
sound again once the snooze
period is over.
When AC power is interrupted
(disconnected) for a short period
of time, both time and alarm
settings will change (unless
batteries are installed). After AC
power is restored (reconnected),
the Digital Display will blink to
indicate that power was interrupted and you should readjust
the time and alarm settings.
Wake Function
1
1
2
2
•
your outlet, consult an
electrician for replacement of
the obsolete outlet.
Protect the power cord from
being walked on or pinched
particularly at plugs,
convenience receptacles, and
the point where they exit from
the apparatus.
Only use attachments/
accessories specified by the
manufacturer.
Use only with the
cart, stand, tripod,
bracket, or table
specified by the
manufacturer, or
sold with the apparatus. When
a cart is used, use caution
when moving the cart/
apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during
lightning storms or when
unused for long periods of
time.
Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus
has been damaged in any way,
such as power-supply cord or
plug is damaged, liquid has
been spilled or objects have
FWD – sets time (increases
value).
Power Failure Indicator
You do not have to set the clock
time as a built-in automatic time
set system is equipped in this clock
powered by 3V (2 X AA batteries,
included). All you have to do is to
plug this clock for power and
current time will be shown
automatically. However, the
batteries can also be exhausted
and we recommend that you
replace the batteries every 2-3
years.
Setting Wake Time
IMPORTANT SAFETY INSTRUCTIONS
Some of the following information may not apply to your
particular product; however, as
with any electronic product,
precautions should be observed
during handling and use.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near
water.
• Clean only with dry cloth.
• Do not block any ventilation
openings. Install in accordance
with the manufacturer’s
instructions.
• Do not install near any heat
sources such as radiators, heat
registers, stoves, or other
apparatus (including
amplifiers) that produce heat.
• Do not defeat the safety
purpose of the polarized or
grounding-type plug. A
polarized plug has two blades
with one wider than the other.
A grounding type plug has
two blades and a third
grounding prong. The wide
blade or the third prong is
provided for your safety. If the
provided plug does not fit into
General controls
Auto Clock Set
Wake Function
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE
PST MST CST EST
Tocom: v1.0 (EN/E)
WARRANTY ARE GOVERNED
BY THE LAWS OF THE STATE
OF INDIANA. EXCEPT TO THE
EXTENT PROHIBITED BY
APPLICABLE LAW, ANY
IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED
TO THE APPLICABLE
WARRANTY PERIOD SET FORTH
ABOVE.
How state law relates to this
warranty:
• Some states do not allow the
exclusion nor limitation of
incidental or consequential
damages, or limitations on
how long an implied warranty
lasts, so the above limitations
or exclusions may not apply to
you.
• This warranty gives you specific
legal rights, and you also may
have other rights that vary
from state to state.
If you purchased your product
outside the USA:
• This warranty does not apply.
Contact your dealer for
warranty information.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement