Security Labs SLC-3130 User guide

Security Labs SLC-3130 User guide
security labs users mana
Specifications:
Imager Type | 1/4” Color CCD
Resolution | 420 Lines
IR | (12) IR LEDs with Halo Diffuser
Light Sensitivity | .001 LUX IR On
Video Format | NTSC Comp 1V p-p
Shutter | Auto Electronics
White Balance | Auto
Gain Control | Auto
Lens | 3.6mm
Mount | Swivel
Power | 12VDC, 135 mA
Operating Temp | 14°-122° F
Size | 2.1”’H x 3.4’D
SLC-3130
SLC-3130 Bullet Camera Installation:
Select a mounting location where the camera can be mounted securely. If an outdoor location is
selected, make sure that the camera is mounted under an eave or awning and has a clear view of the
area to be monitored. After confirming that the mounting location is free from electrical wires or other
hazards, mount the camera securely using the hardware supplied. Connect the video/power cable to the
camera as shown in the connection diagram.
Route the 50° video/power cable from the camera (supplied) to the recording device (DVR), monitor, or
TV. Connect the BNC yellow video plug to the video in jack on the monitoring or recording device.
Connect the 2.1mm red power plug to the power adapter included with the camera. Observe that one
end of the 50° video power cable has a power connection for the camera; the other end connects to the
power supply (different connectors). Refer to the connection diagram on the back of this page for cable
connections to your system.
O
| 8
o
=
oO
e
A
©
=
00
Ge
e)
Ö
|
Q
| 8
D
4
EE
oO
=
|
©
e)
e
SAFETY
The power adapter supplied with your camera is intended for indoor installation only. Use only the power
supply provided for camera power. To avoid possible shock hazards or product damage, do not alter the
connections or wiring. Use caution when connecting the adapter to AC voltage. Avoid exposure to
electrical wires or other hazards when routing AV or power cables through walls, ceilings, etc. Securely
mount the product to avoid possible damage or physical injury. Use the camera in a well ventilated area.
Do NOT allow camera to become submerged in any liquid.
SURVEILLANCE
Certain laws prohibit the recording or monitoring of individuals without their consent. The user of this
product assumes full responsibility for any and all violations of an individual's rights regarding privacy
laws. Check with your local, and state authorities regarding video and audio surveillance.
Camera-Monitor Systems
Camera
Camera video
(yellow plug)
Power
(red plug)
Power
supply
CL
Camera-Recorder-Monitor Systems
Camera
Camera video
(yellow plug)
Power
Power
supply
Red
power
plug
i 50’ video/power = /
(red plug) |
Hs
Recorder back panel
Red
power
plug
e or TV
o)
Yellow MONITOR
video VIDEO
plug
(©)
MONITOR
AUDIO
r
Monitor or TV
©)
MONITOR
VIDEO
IN
MONITOR
AUDIO
IN
Yellow video
plug to open
video input
security labs
POWER
©]
LAN-ETHERNET
=
OE OOOO ©
AUDIO AUDIO
OUT
VIDEO VIDEO VIDEO VIDEO MONITOR
Ve
IN IN IN
CH2 CH3 CHA
Questions? Call Security Labs Toll Free Customer Support at 800-774-0284
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement