PDF User`s Manual
Users Manual
Congratulations on your purchase of the Acrobat HD Ultra. Enhanced
Vision products are designed to give you the highest quality and
convenience available.
The Acrobat HD Ultra product can enable people with low vision to
read, write and to see objects at any distance. The unique design of
this product provides the ultimate in flexibility and offers a large
range of magnification with multiple viewing options that make
reading easier than ever. The Acrobat HD Ultra is a fully integrated
solution, offering the advantage of a built-in LCD screen.
Prior to using this system, please carefully read and follow the
instructions provided within this booklet. A thorough understanding
of the functionality will allow you to fully benefit from the flexibility
and great features of this device.
If you have any questions, please contact the eye-care professional
or the supplier from whom you have acquired the unit.
Product enhancements and revisions are an integral part of what we
do here at Enhanced Vision. Please visit -
http://www.enhancedvision.com/low-vision-product-line.html
and select your Enhanced Vision Product. You will find the most
up-to-date version of the User Manual at the bottom of the page.
FCC COMPLIANCE NOTICE
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help
Unauthorized changes or modification to this system can void the
user’s authority to operate this equipment.
If your Low Vision device has an option to connect to a TV, it must be
used with shielded interface cables in order to meet FCC emissions
limits for Class B digital devices. It is the responsibility of the user to
use the shielded interface cables supplied with the equipment.
FCC Compliance Notice
Table of Contents
Important Safety Precautions ...............................................................
5-8
Acrobat HD Ultra
Acrobat HD Ultra Package Contents ..................................................... 9 -10
Acrobat HD Ultra Setup............................................................................... 11
Using Acrobat HD Ultra ...................................................................... 12 - 29
Advanced Programming..........................................................................
30 - 31
Troubleshooting...........................................................................................
32
Specifications ...............................................................................................
33
Warranty Statement ..................................................................................
34
Other Enhanced Vision Products........................................................
35 –36
Contact Information .................................................................................
37
Table of Contents
Important Safety Precautions
For your safety and to obtain the most benefit and life from the
Acrobat HD Ultra, please read these safety precautions very
carefully.
The Acrobat HD Ultra is designed to enlarge and enhance images
in order to improve the quality of life for people who are visually
impaired. The extent to which this product can improve the ability
to see images depends on a person’s individual condition and level
of visual impairment.
The Acrobat HD Ultra is not designed to restore vision, correct
eye conditions or halt degenerative vision loss. An eye-care
professional can determine the usefulness and suitability of the
Acrobat HD Ultra for a patient’s individual condition. Please
follow these safety precautions:
 Use the Acrobat HD Ultra on a stable, level surface such as a
solid desk or table, according to its intended design
specifications.
 Avoid placing the Acrobat HD Ultra on an unstable table,
cart or stand. It may fall causing serious damage to the
unit or bodily injury to the user.
 Use the Acrobat HD Ultra indoors only – it should NOT be
exposed to extreme or rapid changes in temperature or
humidity. Do not place the Acrobat HD Ultra near a radiator,
heater or areas exposed to long hours of direct sunlight.
 Always place the power cord away from traffic areas to avoid
damage of power supply.
 Prevent the risk of electrical shock by NOT attempting to
disassemble the unit. Please refer all service to an
authorized repair facility.
Important Safety Precautions
5
To Move the Acrobat HD Ultra to Another Location
 Use caution if you are repositioning the Acrobat HD Ultra a
short distance across a desk or table. Make sure you do
not pull on any power cords or connector cables.
Caring for the Acrobat HD Ultra
 Always turn the power OFF on the Acrobat HD Ultra when
the system is not in use.
 Always turn the power OFF before cleaning the Acrobat
HD Ultra.
 Clean the Acrobat HD Ultra with a soft dry cloth or an
electrostatic dusting cloth. DO NOT use liquid cleaners on
its plastic surfaces.
 Clean the lens glass as needed with the lens cloth
provided within the Acrobat HD Ultra’s packaging (See
figure 1).
Figure 1
6
Important Safety Precautions
 Follow all warnings, cautions, and instructions marked on the
product.
 The attached power cord is a disconnect device for electrical
equipment. The socket-outlet should be installed near the
equipment and be easily accessible.
 This product is equipped with a 3-wire grounding type plug as a
safety feature. This plug has a third (grounding) pin and can
only be plugged into a grounding-type power outlet. If
necessary, contact an electrician to replace your power outlet
with a grounding-type power outlet.
 Do not use the Acrobat HD Ultra in, near or around water. The
Acrobat HD Ultra is not designed to offer protection against
contact with liquids of any kind.
 Do not use the Acrobat HD Ultra near flammable liquids.
 At least once per week, clean the Acrobat HD Ultra with a soft
dry cloth or an electrostatic dusting cloth. DO NOT use liquid
cleaners on its plastic surfaces. No additional methods of
sterilization or cleaning are recommended or required.
Important Safety Precautions
7
 This product contains moving
parts. Please use caution
when moving the adjustable
slide arm or when transporting
the Acrobat HD Ultra to avoid
possible injury to hands and
fingers.
 To avoid personal injury or damage to the Acrobat HD Ultra, do
not make any other type of connections to the camera input jacks
other than those indicated in the photos below.
Susceptibility to Interference
There may be temporary degradation of the image when the
Acrobat HD Ultra is subjected to a strong radio frequency field,
electro-static discharge or transient electrical noise. An electrostatic discharge (caused by static electricity) may cause the
screen to go blank. If this happens, switch the unit off and on
again.
8
Important Safety Precautions
ACROBAT HD ULTRA PACKAGE CONTENTS
All required accessories for operation are included in your Acrobat HD
Ultra package.
Acrobat HD Ultra is comprised of the following items and features:
1. 20”, 22”, 24" or 27" LCD Screen: displays high quality image
2. Camera: rotates 340 degrees to capture and enlarge the image
3. Carrying Handle: used for lifting the Acrobat HD Ultra
4. Zoom Lens: used up close high magnification
5. Arm: rotating arm that holds the camera
6. Lock: used to lock arm from sliding horizontally
Accessories included:
7. Remote Control: (batteries included): allows the user to control the
Acrobat HD Ultra functions from a distance
8. Lens Cloth: permits cleaning of the LCD display
Accessories NOT included:
9. Rolling Case (optional): Provides protection for the Acrobat HD Ultra and makes
transportation even easier
10. DVI toggle box (optional): Allows the display of the Acrobat HD Ultra to be shared
along with a standard DVI output of a computer and permits switching between
either source
11. X-Y Table: X-Y table and Mini X-Y table are available for your Acrobat HD Ultra,
place underneath your acrobat camera and make reading even easier!
Acrobat HD Ultra Package Contents
9
2
1
4
7
3
8
5
9
6
10
11
10
Acrobat HD Ultra Package Contents
ACROBAT HD ULTRA SETUP
1. Unpacking and transporting the Acrobat HD Ultra
During unpacking and transporting, be sure to lift
the Acrobat HD Ultra by the built-in carrying
handle.
****Do not attempt to lift or carry the LCD
by the base. (See Figure 1)****
2. Setup the Acrobat HD Ultra
Place the Acrobat HD Ultra on a flat, level surface
such as a table or desk.
Figure 1
3. Connect the AC power
Connect the attached power cord to an available
wall outlet. (See Figure 2)
To offer additional protection during an electrical
storm, a surge protector may also be used and is
recommended.
4. Turn the power on
On the rear, right side of the Acrobat HD Ultra, flip
the switch from the 0 to l position (See Figure 3).
The LCD screen and Acrobat HD Ultra Camera will
automatically turn ON in a few seconds. An image
of what the Camera is pointing at should appear on
the LCD screen.
Figure 2
Turn the power OFF by flipping the same switch
back to the 0 position. However, leave the power ON
for this training section.
Once the Acrobat HD Ultra has been powered on you
can then use the Red “Power” button located in the
upper right corner of the Acrobat HD Ultra Remote to
power the Acrobat HD Ultra on/off.
Acrobat HD Ultra Setup
Figure 3
11
USING ACROBAT HD ULTRA
Adjust the camera position
The Acrobat HD Ultra camera is attached to a specially designed arm that
allows the camera to slide left or right, or to pivot in multiple directions. (See
Figures 1-4)
Figure 1
Figure 2
Figure 3
Figure 4
12
Using Acrobat HD Ultra
Adjusting the Viewing Angle
The Acrobat HD Ultra Camera rotates 340 degrees, providing unsurpassed
flexibility for the visually impaired. Do NOT force the camera beyond its
340-degree angular range as this may damage the unit.
The Acrobat HD Ultra may be used to see objects in the distance, viewing
oneself and reading or writing. To change the viewing mode, simply turn
the position of the Camera by rotating it on the arm.
Distance Viewing Mode
The camera can rotate forward to capture people, objects and scenery.
“Distance Viewing” is displayed in the upper-left corner of the screen when
changing to this viewing angle. Be sure to open the Reading Lens for
Distance Viewing (See Figure 1).
This Distance mode enables up to 25X magnification for objects 3 feet
away. In this mode, although the camera can view objects at an infinite
distance, the recommended distance from camera to the distant object
is within 3-30 feet to achieve maximum magnification benefit.
(See Figure 2.)
Figure 1
Figure 2
Using Acrobat HD Ultra
13
Self-Viewing Mode
The Camera can be rotated backwards to provide you with the
equivalent of a full-length mirror. “Self Viewing” is displayed in the
upper-left corner of the screen when changing to this viewing angle.
In this position, you can use the Acrobat HD Ultra to help you put on
make-up, shave or perform other personal hygiene (See Figure 1).
For optimum clarity, use the Zoom Lens and position yourself
between 7.5”-22” away from the Camera.
7.5” - 22” (Recommended)
Figure 1
14
Using Acrobat HD Ultra
Reading and Writing Mode
The Camera can be adjusted downward for reading, writing and
enjoying crafts or other hobbies (See Figure 1). This makes it ideal for
classroom use. When the camera is rotated downward,
“Reading-Mode” is displayed in the upper-left corner of the screen.
The Acrobat HD Ultra can slide freely, left or right, along the specially
designed bracket mechanism.
It is best to close the Zoom Lens when objects are placed 12”-19”
away from the Camera for optimal viewing clarity.
12” - 19” (Recommended)
Figure 1
Using Acrobat HD Ultra
15
Adjusting Magnification
The Acrobat HD Ultra offers a large range of magnification
capabilities. The following directions can be used with the Remote
or Camera.
(See Figures 1 & 2)
1. To adjust the magnification press and hold the [+] or [-] buttons
located on the Remote or Camera until you reach your desired
magnification.
2. “Zoom In” will appear in the upper left corner of your monitor when you
are increasing magnification. ”Max Zoom,” will appear at the maximum
magnification.
3. “Zoom Out” will appear in the upper left corner of your monitor when
you are decreasing magnification. “Min Zoom,” will appear at the
minimum magnification.
NOTE: The extent of the magnification is dependent upon the distance
from the Camera to the object.
Figure 1
16
Figure 2
Using Acrobat HD Ultra
Changing the Viewing Mode
The Acrobat HD Ultra was designed to provide optimum viewing for people
with certain visual conditions by offering a range of choices in both text and
background colors. Use the Mode key (See Figure 1 & 2) to toggle
between full color viewing, Black and White, enhanced positive,
enhanced negative, and your 5 favorite color select modes. The 5
favorite color select modes can be modified to any of the 28 color
select options by following the instructions provided on page 24.
The following directions can be used with the Remote or Camera.
Adjusting Viewing Modes
1. You can choose a viewing mode by pressing the "Mode" button on
the Remote or Camera (See figure 1 & 2).
2. Each push will allow you to cycle through all seven viewing modes
(See next page).
Figure 1
Figure 2
Using Acrobat HD Ultra
17
Viewing Modes
 Full Color Image
This mode gives a true color representation of the image being magnified.
 Black-and-White Image
This mode gives a black and white representation of the image being
magnified.
 Enhanced-Positive Image
This mode provides a white background with
Crisp, Clear Text
black text. It increases the contrast to offer
crisp text images for reading.
Images!
 Enhanced-Negative Image
This mode provides a black background with
white text. It increases the contrast to offer
crisp text images for reading.
Crisp, Clear Text
Images!
 Color Select 1
In factory default this mode provides a blue background with yellow
text. This is one of the most commonly used color combinations. To
change this mode to any of the 28 available follow the instructions on
page 24.
 Color Select 2
In factory default this mode provides a black background with green
text. To change this mode to any of the 28 available follow the
instructions on page 24.
 Color Select 3
In factory default this mode provides a black background with yellow
text. To change this mode to any of the 28 available follow the
instructions on page 24.
 Color Select 4
In factory default this mode is turned off. Follow the instructions on
page 24 to turn this color mode on.
 Color Select 5
In factory default this mode is turned off. Follow the instructions on
page 24 to turn this color mode on.
18
Using Acrobat HD Ultra
Changing Favorite Color Modes
The Acrobat HD Ultra provides 28 selectable color
modes, and allows selecting up to 5 favorites for
use, as described on page 17. The following
directions can be used to change the favorite
color modes on your Acrobat:
1. Press and hold the "Mode" button for at least 3 seconds
to begin the “Entering Setup” Menu.
2. Scroll with the [+] to "6. Color Select"
3. Press the "Mode" button.
4. Choose with [+] or [-] which color select mode favorite
you would like to change 1, 2, 3, 4 or 5.
5. Press the "Mode" button.
6. Choose if you would like this favorite "On" or "Off"
by pressing the [+] or [-]
7. Press the "Mode" button.
8. Press the [+] or [-] button to preview each of the 28
available color modes.
9. Press the "Mode" button to select and save the
desired favorite color mode.
Using Acrobat HD Ultra
19
Using the procedure outlined on Page 19, the following 28 Color
Select combinations can be programmed into any of the 5 color
select programs, based on your personal preferences.
Color
Mode
#1
#2
#3
#4
#5
#6
#7
#8
#9
# 10
# 11
# 12
# 13
# 14
# 15
# 16
# 17
# 18
# 19
# 20
# 21
# 22
# 23
# 24
# 25
# 26
# 27
# 28
20
Background
Color
BLACK
BLACK
BLACK
BLACK
BLACK
BLACK
WHITE
WHITE
WHITE
WHITE
WHITE
YELLOW
GREEN
YELLOW
GREEN
YELLOW
RED
BLUE
PURPLE
ORANGE
GREEN
RED
PURPLE
BLUE
ORANGE
RED
YELLOW
BLUE
Text
Color
GREEN
YELLOW
RED
BLUE
PURPLE
ORANGE
GREEN
RED
PURPLE
BLUE
ORANGE
RED
YELLOW
BLUE
BLACK
BLACK
BLACK
BLACK
BLACK
BLACK
WHITE
WHITE
WHITE
WHITE
WHITE
YELLOW
GREEN
YELLOW
Notes
*Default Color Select 3
*Default Color Select 2
*Default Color Select 1
Using Acrobat HD Ultra
Adjusting Brightness (Color Mode Only)
The following directions can be used if you would like
adjust the brightness of the screen when in Color Mode:
1. Press and hold the “Mode” button for at least 3 seconds
to begin the “Entering Setup” Menu.
2. Scroll with the [+] to “4. Brightness Color”
3. Press the “Mode” button.
4. Press the [+] or [-] button to increase or decrease screen
brightness.
5. Press the “Mode” button to set and save the screen brightness.
Adjusting Brightness (Color Select Mode)
The following directions can be used if you would
like adjust the brightness of the screen in Color
Select Mode:
1. Press and hold the “Mode” button for at least 3
seconds to begin the “Entering Setup” Menu.
2. Scroll with the [+] to “5. Brightness C. Sel”
3. Press the “Mode” button.
4. Press the [+] or [-] button to increase or decrease screen brightness.
5. Press the “Mode” button to set and save the color select screen
brightness.
Using Acrobat HD Ultra
21
Adjusting the White Balance with the Remote Control
The color white is often affected by the lighting used in a room. The
Acrobat HD Ultra White Balance control allows you to achieve optimum
clarity.
The following directions can be used to adjust the White Balance with the
Remote:
1. Press the White Balance “WB” button (See figure 1) on the Remote,
and wait 2 seconds for the key to become active.
2. Repeat Step 1 to scroll through all four settings.
 W.B. Auto automatically adjusts to the lighting in the room
 W.B. Warm casts a red tone
 W.B. Normal casts a balanced tone
 W.B. Cool casts a blue tone
Figure 1
22
Using Acrobat HD Ultra
Adjusting the White Balance with the Camera
The following directions can be used to adjust the
White Balance from the Camera:
1. Press and hold the Mode button for 3
seconds to “Entering Setup” Menu.
2. Press the [+] to scroll to “2. White Balance”.
3. Press the Mode button to initiate the White
Balance feature.
4. Press the [+/-] to scroll through the
four settings.
5. Press the Mode button to exit this feature.
4
4
Figure 1
Using Acrobat HD Ultra
23
Using Line Markers with the Remote control
Line Markers are used to frame an image between two horizontal lines.
These lines may be used as a reading guide for long passages of text, as a
guide to help keep your place as you move from one side of the page to
the other, or just to make writing easier.
The following directions can be used to add/remove Line Markers with the
Remote:
1. Press and hold the Line Markers On/Off (“LM ON/OFF”) button for at
least 1 second.
2. To move the Upper Line Marker, press the “ULM [+/-]” buttons.
3. To move the Lower Line Marker, press the “LLM [+/-]” buttons.
4. To remove Line Markers press and hold the “LM ON/OFF” button for at
least 1 second.
Figure 1
24
Using Acrobat HD Ultra
Using Line Markers with the Camera
The following directions can be used to add/remove
Line Markers from the Camera:
1.
Press and hold the "Mode" button for at least 3
seconds to begin the “Entering Setup” Menu.
2.
The menu will automatically indicate “1. Line
Markers”
Press the "Mode" button.
The menu will indicate “1. Line Makers Off”
Press the [-] button to activate "Line Markers
On."
Press the "Mode" button to set line marker.
Next the menu indicates “1. Upper Line ADJ”
3.
4.
5.
6.
7.
8.
Press the [+/-] buttons to raise or lower the
Upper Line Marker.
9.
Press the "Mode" button to set the Upper Line
Marker.
10. The menu will now indicate “2. Lower Line
Marker”
11. Press the [+/-] buttons to raise or Lower the
Lower Line Marker.
12. Press the Mode button to set the Lower Line
Marker.
13. To remove Line Markers repeats steps 1-4.
Figure 1
14. Press the [+] button to return to the “1. Line
Markers Off” Menu.
15. Press the Mode button to exit the Menu.
Using Acrobat HD Ultra
25
Using Left handed mode
The following directions can be used if you would like
to switch between left and right handed mode:
1. Press and hold the "Mode" button for at least 3
seconds to begin the “Entering Setup” Menu.
2. Scroll with the [+] to "3. Left Handed Mode"
3. Press the "Mode" button.
4. The menu will indicate “1. Left Handed Off”
5. Press the [+] button to activate " 2. Left Handed
On."
6. Press the "Mode" button to set Left Handed mode On
or Off.
Adjusting Brightness
The following directions can be used if you would like
adjust the brightness of the screen:
1. Press and hold the "Mode" button for at least 3
seconds to begin the “Entering Setup” Menu.
2. Scroll with the [+] to "4. Brightness"
3. Press the "Mode" button.
4. Press the [+/-] button to increase or decrease
screen brightness.
5. Press the "Mode" button to set and save the screen
brightness.
26
Using Acrobat HD Ultra
Using the Object Locator
The Acrobat HD Ultra Object Locator feature can help you quickly
locate something you're looking for on a page, or a specific part of an
object you want to view more closely.
The following directions can be used to locate a desired object with the
Remote and Camera:
1. Press and hold down the "Find" button on Remote (See Figure 1) or
Camera (See Figure 2).
The Acrobat HD Ultra will automatically zoom out
to the widest field of view, and a "target" (as shown
in Figure 3) will appear in the center of the monitor
screen.
2. Move your work or reading material until you
have located the desired item within the
"target" area.
3. Release the "Find" button, and it will magnify the item you located
within the targeted area.
Figure 1
Figure 2
Using Acrobat HD Ultra
27
Using Intelligent Focus Lock with the Remote Control
When The Acrobat HD Ultra is turned on, it is automatically set on auto focus.
This is the most convenient setting for everyday activities, such as reading
from a single page to a book, reading a prescription bottle or working with
arts and crafts.
Focus Lock allows you to maintain focus on a specific
object at a fixed distance, such as writing. The Acrobat
HD Intelligent Focus Lock feature will automatically
refocus on the object you are viewing after changing
the magnification size. The Acrobat HD Ultra will keep
your writing in focus, rather than your hand when it
comes into the Camera's frame.
The following directions can be used to apply the
Focus Lock feature using the Remote:
Figure 1
1. Place your notepaper, stationery, checkbook or other
writing material on the table.
2. Press the “Lock” button on the Remote
(See Figure 1).
3. The word "Focus Lock" will appear and remain in the upper left corner of
the monitor (See Figure 2).
4. To Return to Auto-Focus, press the “Lock” button on the Remote
(See Figure 1).
28
Using Acrobat HD Ultra
Using Intelligent Focus Lock with the Camera
The following directions can be used to apply the Focus Lock feature using
the Camera:
1. Place your notepaper, stationery, checkbook or other writing material
on the table.
2. To initiate the Focus Lock feature simultaneously press the “Find” and
“Mode” buttons for at least 1 second on the Camera (See Figure 1).
3. The word "Focus Lock" will appear and remain in the upper left corner of
the monitor (See Figure 2).
4. To Return to Auto-Focus, simultaneously press the “Find” and “Mode”
buttons for at least 1 second on the Camera (See Figure 1).
2
4
Figure 1
Using Acrobat HD Ultra
29
Using the Freeze Function
Freeze allows you to take a snap shot of what the Acrobat HD ultra is
magnifying in order for you to have extended time to view the image.
This is particularly helpful when taking notes in a classroom.
The following directions can be used to apply the Freeze mode using the
Remote control only:
1. Press and hold the “Freeze” button for at least 2 seconds (See Figure 1).
2. The picture or video will freeze and in the upper left corner of the
screen will indicate “Freeze” (See Figure 2).
3. To release the Freeze mode, press any key or change the
viewing angle.
Figure 1
30
Using Acrobat HD Ultra
ADVANCED PROGRAMING
Advanced Programming Options
The Acrobat HD Ultra has advanced capabilities for modifying the programming of the
included remote control (when using multiple units) as well as changing the default
language used within the setup menus. These settings are completely optional and
should not be changed under normal circumstances. The information listed on the
following pages are for technical reference purposes only. Please see your Enhanced
Vision representative or call our toll-free technical support should it be necessary for you
to modify these settings.
Remote Codes
Remote Control (Transmit) Code Change:
By default, a single remote control (and
corresponding remote control code) is factory
programmed and used for all Acrobat camera
functions. While acceptable for most single-use
applications, when 2 or more Acrobats are used
within close proximity to each other (lab
setting), exclusive remote control over each
unit may be desired. Therefore, it is possible to
modify the sending/receiving codes of the
remote control and Acrobat head for exclusive
use, if desired. Up to 15 unique codes can be
assigned. For proper communication, both the
Remote control (transmit) and camera head
(receive) must be set to matching ID codes.
Please refer to the chart on the right for more
information.
• #28 (default/factory reset):
Push MODE and FIND for 3 secs.
• #15: Push MODE and LLM- for 3 secs.
• #24: Push MODE and ULM- for 3 secs.
• #25: Push MODE and LLM+ for 3 secs.
• #27: Push MODE and ULM+ for 3 secs.
• #07: Push + and FIND for 3 secs.
• #11: Push + and LLM- for 3 secs.
• #14: Push + and ULM- for 3 secs.
• #23: Push + and LLM+ for 3 secs.
• #31: Push + and ULM+ for 3 secs.
• #08: Push - and FIND for 3 secs.
• #09: Push - and LLM- for 3 secs.
• #10: Push - and ULM- for 3 secs.
• #12: Push - and LLM+ for 3 secs.
• #13: Push - and ULM+ for 3 secs.
Language Select
The default language used for the on screen display (OSD) may be changed by accessing the
Advanced Programming Features menu on the Acrobat. This is accomplished using a special
key combination sequence (4321), accessed by pressing the [+] and [MODE] buttons
on Acrobat camera head. Language selection can be adjusted within the second menu level.
Please refer to the chart on the following page for detailed reference.
Advanced Programming
31
ACROBAT HD ULTRA FEATURES MENU
Secret 4321 code to
enter menu using SIZE +:
4 press, mode
3 press, mode
2 press, mode
1 press, mode
** Items currently selected appear
in GREEN **
Select different IR codes to avoid
multiple remote control conflicts
2nd Menu Level
FEATURES MENU
REMOTE CTRL CODES SUB
MENU
1. REMOTE CTRL CODES
1. SC 28
(Default)
Press
MODE to
enter menu
Size + or
Size - to
navigate
Size + or Size –
to navigate
2. SC 15
Size + or Size –
to navigate
2. LANGUAGES
Press Mode to
Select Code
3. SC 24
Size + or
Size - to
navigate
Press
MODE to
enter menu
Size + or Size –
to navigate
4. SC 25
3. 50-60Hz MAINS
Size + or Size –
to navigate
Press
MODE to
enter menu
Size + or
Size - to
navigate
5. SC 27
Size + or Size –
to navigate
6. SC 07
4. EXIT
Size + or Size –
to navigate
Languages Sub Menu
7. SC 11
1. ENGLISH
Size + or Size –
to navigate
2. FRENCH
Size + or Size –
to navigate
Press Mode to
Select
LANGUAGE
8. SC 14
Size + or Size –
to navigate
Size + or Size –
to navigate
9. SC 23
3. GERMAN
Size + or Size –
to navigate
Size + or Size –
to navigate
10. SC 31
4. ITALIAN
Size + or Size –
to navigate
5. SPANISH
Size + or Size –
to navigate
Press Mode to
Select
LANGUAGE
11. SC 08
Size + or Size –
to navigate
Size + or Size –
to navigate
12. SC 09
6. JAPANESE
Size + or Size –
to navigate
Size + or Size –
to navigate
13. SC 10
7. PREVIOUS MENU
Size + or Size –
to navigate
50-60HZ MAINS SUB MENU
For use in 50Hz based countries
(Europe, UK, Australia…) to avoid
flicker
For use in 60Hz based countries
(USA, Canada…)
Press
Mode
Size + or Size –
to navigate
14. SC 12
Size + or Size –
to navigate
AC 50HZ FORMAT
Press
Mode
15. SC 13
Size + or Size –
to navigate
AC 60HZ FORMAT
Size + or Size –
to navigate
Press
Mode
16. PREVIOUS MENU
Press MODE
PREVIOUS MENU
32
Press Mode to
Select Code
Advanced Programming
Press Mode to
Select Code
TROUBLESHOOTING
Q. How should I clean the Acrobat HD Ultra?
A. At least once per week, clean the Acrobat HD Ultra with a soft
dry cloth or an electrostatic dusting cloth. DO NOT use liquid
cleaners on any of the plastic surfaces.
Q. The Remote Control is not functioning properly. What should I do?
A. After ensuring you have fresh batteries installed in the remote
control, please reset the remote control back to factory settings.
Simply press and hold the [FIND] and [MODE] buttons on the
remote control for at least 3 seconds, or until the LED indicator
begins to flash. Then, attempt normal operation of the remote
control functions.
Q. Can I use the Acrobat HD with a computer?
A. Yes, the LCD of the Acrobat can be used along with a computer.
Although the Acrobat will not magnify computer images, it is
possible to use the Acrobat’s built-in LCD with either the Acrobat
camera or a computer (equipped with a standard DVI
connection). This permits a single LCD display to be used for
either purpose. An optional DVI toggle box is specifically
designed for this application. Please contact your local Enhanced
Vision dealer for more details.
Troubleshooting
33
ACROBAT HD ULTRA SPECIFICATIONS
Product Dimensions:
20” LCD: 21”H x 19”W x 8”D (53cm x 48.25cm x 20cm)
22” LCD: 21”H x 20”W x 8”D (53cm x 51cm x 20cm)
24” LCD: 21”H x 22”W x 8”D (53cm x 56cm x 20cm)
27” LCD: 21”H x 25”W x 8”D (53cm x 63.5cm x 20cm)
Product Weight:
20” LCD: 18.4 lbs / 8.35 kg
22” LCD: 18.6 lbs / 8.5 kg
24” LCD: 19.6 lbs /8.9 kg
27” LCD: 21 lbs / 9.5 kg
Display:
Type: TFT Active Matrix LCD Average lifetime: 25,000 hours
Monitor (common to *20”, *22",*24 & *27" models):
Resolution: 1600 x 900 (20" model)
Resolution: 1920 x 1080 (22”, 24” & 27" models)
Response Rate: 5 milliseconds (20”, 22" & 24" monitors)
Response Rate: 3 milliseconds (27” monitor)
* all monitor specifications subject to change without prior notice
Magnification range:
20” LCD: 1.4X (minimum) - to 52.5X (maximum)
22” LCD: 1.5X (minimum) - to 57.8X (maximum)
24” LCD: 1.6X (minimum) - to 63X (maximum)
27” LCD: 1.8X (minimum) - to 70.9X (maximum)
20”, 22” 24” Field of View (Near Mode): 10.8 inches (min); .24 (max)
27” Field of View (Near Mode): 11.6 inches (min); .24 (max)
20”, 22” & 24” Working Distance (Near Mode): 17 inches
27” Working Distance (Near Mode): 18.4 inches
Viewing Modes:
Color, Black & White, High Contrast, Positive/Negative, Digital Color Select (5 modes)
Power Supply:
Input voltage/current: 120-240 VAC / 0.3-0.5A (nominal)
Frequency: 60/50 Hz
Power usage: 27W (nominal)
Equipment Classification (IEC 601-1):
Type of Protection: Class 1
Degree of Protection: Type B
Mode of Operation: Continuous
Operating temperature range: 10-40°C / 50-104°F
Storage/transport temperature range: 0-60°C / 32-140°F
Warranty: 2 years
34
Acrobat HD Ultra Specifications
WARRANTY STATEMENT
Enhanced Vision
Acrobat Video Magnifier Warranty Policy
Enhanced Vision products are designed to give you the highest quality image,
convenient features, ease of use and reliable service. The Acrobat HD Ultra has
been inspected and tested prior to shipping. Enhanced Vision warrants the
Acrobat HD Ultra against defects in material and workmanship under normal use for
two years from the date of original purchase. Enhanced Vision, at its option, will at
no charge either repair the product or replace it during the warranty period. There
are no other expressed or implied warranties accompanying this product.
This warranty does not cover: a) Defects or damage from misuse, use in other than
normal and customary manner, accident or neglect; b) Defects or damage from
improper operation, maintenance, installation, adjustment, alterations or modification;
c) Defects or damage from spills of food or liquid; d) All plastic surfaces and all other
externally exposed parts that are scratched or damaged due to normal use; e)
Damage due to operation of the Acrobat HD Ultra with equipment not supplied by
Enhanced Vision.
 You must provide proof of purchase, bearing the date of purchase, in order to
receive warranty service.
 Anyone using this product does so knowingly assuming certain risks, due to the
need to utilize vision enhancement devices.
 A 2-year extended warranty option is available within 12 months from the date of
purchase. Please contact Enhanced Vision for detailed information.
Service Process
In the event that technical support or repair service is needed, please contact your local
Enhanced Vision representative or the Enhanced Vision warranty service center.
If warranty service is required, please contact Enhanced Vision at (800)440-9476 ext.3
Monday through Friday, between 8 a.m. and 5 p.m. Pacific Standard Time (PST) to request
a return authorization number. Warranty repairs will not be accepted without a valid
return authorization number.
You may wish to keep the original product packaging in case warranty service is
required. The manufacturer cannot provide packaging for warranty repairs.
***NOTE: Please completely fill out and send in the enclosed warranty
registration card.***
Warranty Statement
35
OTHER ENHANCED VISION PRODUCTS
Pebble-mini
Pebble HD
36
Other Enhanced Vision Products
Merlin ultra HD
Merlin ultra HD’s camera technology produces an
even truer, more natural image. Easily read books
and magazines, read and write letters, manage
your financial records, view color photos, do
crossword puzzles, and even pursue a favorite
hobby.
Magnification:
20” LCD: 1.9x (min) to 51.2x (max)
22” LCD: 2.1x (min) to 55.9x (max)
24” LCD: 2.3x (min) to 61.2x (max)
Other Enhanced Vision Products
37
Accessories
DVI Toggle Box
Allows you to toggle between either the Acrobat HD Ultra or
your computer display (DVI connection).
Smart Video
Connects Enhanced Vision’s low vision devices to a computer
monitor.
Carrying Cases
Convenient cases for storage and transport of all Enhanced Vision
products.
Battery
Rechargeable batteries for Enhanced Vision’s low vision devices.
Contact information:
(US Office) Phone: (714)465-3400
Fax: (714)374-1821
(UK Office) Phone: +44 (0)115 9442317
Fax: +44 (0)115 9440720
(DE Office) Phone: +49 (0) 6078 969827-0 Fax: +49 (0) 6078 969827-33
www.enhancedvision.com
Technical Support:
Main Toll Free (800) 440-9476 ext. 3
Local Phone: (714) 465-3400 ext. 3
E-mail: [email protected]
38
Other Enhanced Vision Products
NOTES
Notes
The Acrobat HD Ultra video magnifier is designed to enlarge
and enhance images to improve the lives of people who
have low vision. The extent to which the Acrobat HD Ultra
can improve the ability to see images and text depends on a
person's individual condition and level of visual impairment.
The Acrobat HD Ultra is not designed to restore vision,
correct eye conditions or halt degenerative vision loss. An
eye-care professional can best determine the suitability of
the Acrobat HD Ultra for a patient's specific condition. For
more information, please visit www.enhancedvision.com.
www.enhancedvision.com
(800) 440-9476 (US Office, toll free)
(714) 465-3400 (US Office)
+44 (0) 115 9442317 (UK Office)
Tel. +49 (0) 6078 969827-0 (DE Office)
Fax +49 (0) 6078 969827-33 (DE Office)
Part # MAN-0007-01 Rev X1
February, 2015
Copyright © 2009 by Enhanced Vision. All rights reserved.
Product specifications subject to change without prior notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement