DL205 Ethernet Communications Modules

DL205 Ethernet Communications Modules
Ethernet Communications Modules
Prices as of April 16, 2014. Check Web site for most current prices.
Ethernet
Communications
Module
H2-ECOM100 $301.00
H2-ECOM-F $358.00
can be used to monitor or update the
program in any DirectLOGIC PLC on the
network.
Simple connections
Use Category 5 UTP cables or 62.5/125
ST-style fiber optic cables depending on
the requirements of your application.
Inexpensive UTP cables can be run up to
100 meters between nodes, and fiber
optic cables can be run up to 2,000
meters. Fiber optic cables virtually eliminate electrical noise problems. Use
repeaters to extend distances and expand
the number of nodes.
Our HA-TADP (10/100Base-T) PC network
adapter card and Stride Ethernet switches
are compatible with the ECOM modules.
See the Communications Products section
for information on these items.
ECOM starter kit
Overview
Ethernet Communications Modules offer
features such as:
• High-speed peer-to-peer networking
of PLCs
• Fast updates with DirectSOFT Programming
Software
• High-performance access for Human
Machine Interface (HMI), ERP, MES or
other Windows-based software
• Industry standard Modbus TCP
Client/Server Protocol (H2-ECOM100)
• Free SDK for custom drivers
• Easy setup
The Ethernet Communication (ECOM)
Modules represent a price breakthrough
for high-speed peer-to-peer networking of
PLCs. No longer are you forced to designate a single PLC to be the network
master. Any PLC can initiate communications with any other PLC. Link your PLCs
with PCs using industry standard Modbus
TCP protocol connected through standard
cables, hubs, and repeaters. Or, use our
Direct I/O Server to link to your
KEPD
favorite HMI/SCADA, data historian, MES
or ERP software to DirectLOGIC PLCs. Our
Direct HMI and our DataWorx
LookoutD
data collection software include ECOM
drivers. DirectSOFT Programming Software
The H2-ECOM-START gives you everything you need to make your first Ethernet
network simple to build. It contains an
H2-ECOM100 module and instruction
manual, a network adapter card (PCI) for
your PC, a crossover cable, and a
Software Product Showcase Demo CD.
The CD contains demo versions of our
software products that support the ECOM
Modules. See the Software Products
section for information on the available
software packages.
H2-ECOM100 IBox
communications
instructions
Over 25 Communications IBox instructions are available when using the
H2-ECOM100 with a DL250-1 or DL260
PLC and DirectSOFT5 programming software. These easy-to-use instructions allow
you to:
• Enable/disable module DHCP
• Read/write module IP, Gateway and
Subnet Mask addresses
• Read/write module ID, Name and
Description
• Send E-mail messages
• Read/Write PLC memory to networked
Hx-ECOM100 modules
• Read/Write PLC memory to networked
Hx-ECOM(-F) modules
See the following page for example
Communications IBox instructions.
Company
Information
Control Systems
Overview
CLICK PLC
Do-More
PLCs Overview
Do-More H2
PLC
Do-More T1H
PLC
DirectLOGIC
PLCs Overview
DirectLOGIC
DL05/06
DirectLOGIC
DL105
DirectLOGIC
DL205
DirectLOGIC
DL305
DirectLOGIC
DL405
Productivity
Controller
Overview
Productivity
3000
The
H2-ECOM100 supports the
Industry Standard Modbus TCP
Client/Server Protocol
Universal
Field I/O
Software
C-More
HMI
C-More Micro
HMI
ViewMarq
Industrial
Marquees
Other HMI
Message is sent out
of port only
connected to device
Communications
Message in
from a device
Appendix
Book 1
Terms and
Conditions
See the Communications
section for details on
Ethernet Switches
Specifications
H2-ECOM100
H2-ECOM-F
Communications
Data Transfer Rate
Link Distance
Ethernet Port
10/100Base-T Ethernet
10Base-FL Ethernet
100 Mbps max.
10 Mbps max.
100 meters (328 ft)
2,000 meters (6,560 ft)
RJ45
ST-style fiber optic
Ethernet Protocols
TCP/IP, IPX, Modbus TCP,
DHCP, HTML configuration
TCP/IP, IPX
Power Consumption
Manufacturer
300 mA @ 5 VDC
640 mA @ 5 VDC
Host Automation Products, L.L.C.
Book 1 (14.1)
w w w. a u to m a t i o n d i re c t . c o m / d l 205
DL205 PLCs
eD2-57
Ethernet Communications Modules
Prices as of April 16, 2014. Check Web site for most current prices.
Modbus TCP support
The H2-ECOM100 supports the industry
standard Modbus TCP Client/Server
protocol in addition to the standard IP and
IPX protocols. This allows the DL205 PLC
with an H2-ECOM100 module to serve
as a client (master) or as a server (slave)
on a Modbus TCP Ethernet network. The
H2-ECOM100 can actively issue Modbus
commands to other nodes or devices on
the Modbus TCP network or simply
respond to connected Modbus TCP
clients.
PLC-to-PLC
communications
PLC-to-PLC or PLC to a Modbus TCP
device communications can be accomplished using standard Read from Network
(RX) and Write to Network (WX) instructions (DL240/250-1/260, all H2 series
ECOMs and all DirectSOFT versions). If
you’re using our DirectSOFT5 programming software, a DL250-1 or DL260 PLC
and an H2-ECOM100, you can use fill-inthe-blank IBox instructions to simplify your
communications programming. The H2ECOM100 supports the ECOM100
Configuration IBox for use with the ECRX
and ECWX IBox instructions to read/write
to other ECOM(100)s. All H2 series
ECOM modules support the NETCFG
Configuration IBox for use with the NETRX
and NETWX IBox instructions to read/write
to other ECOM modules (remember
DL250-1/260 and DSOFT5 required).
The Communications IBox instructions
execute with built-in interlocking to greatly
simplify communications programming.
H2-ECOM100 has
e-mail capability!
The
H2-ECOM100
Send
EMail
(ECEMAIL) IBox instruction allows the
module to behave as an e-mail client and
send an SMTP request to your SMTP
Server to send a specified e-mail message
to the e-mail addresses in the in IBox’s
To: field. The Body: field allows you to
embed real-time data in your e-mail
message. The DL50-1/260 CPU and
DirectSOFT5 are required to use the IBox
instructions.
Modbus TCP communications architecture
ECOM100 Configuration IBox
ECOM100 Read Network IBox
NetEdit3 software
NetEdit3 Software ships free with the
ECOM User Manual. Use NetEdit3 to
configure the ECOM modules for your
network. Flexible addressing allows you to
use your choice of protocols and identifying methods. Assign each module a
number or a name or both. You don’t
have to use an IP address, but you can if
it’s necessary for your network. NetEdit3
uses two protocols for PC-to-PLC communications: IPX and TCP/IP. The NetEdit3
screen displays all identifiers and troubleshooting information for each module
on the network. You can use NetEdit3 to
adjust parameters for PLC-to-PLC
communications by clicking on Advanced
Settings. The network identifiers can also
DirectSOFT
be
changed
from
Programming Software.
Choose your slot
ECOM100 Send EMail IBox
The ECOM modules plug into any I/O
slot (excluding slot 0) of any local DL205
I/O base. The module maintains identification data, descriptive information, and
communication parameters for PLC-toPLC communications in flash memory.
Disconnect power before installing or
removing any PLC module.
205
C PU
Slot0
Slot1
Slot2
Slot3
Slot4
N o!
Note: Use D2-240, D2-250, D2-250-1 or D2-260 CPUs
with the ECOM modules. The D2-230 CPU and D2-CM
bases do not support the ECOM modules.
Book 1 (14.1)
eD2-58
DL205 PLCs
1 - 80 0 - 633 - 0405
Prices as of April 16, 2014. Check Web site for most current prices.
Power Requirements
These charts help
determine your power
requirements
This section shows the amount of power
supplied by each of the base power
supplies and the amount of power
consumed by each DL205 device. The
Power Consumed charts list how much
INTERNAL power from each power source
is required for the DL205 devices. Use this
information when calculating the power
budget for your system.
In addition to the internal power sources,
the DL205 bases offer a 24 VDC auxiliary
power supply with external power connections. This auxiliary power supply can
power external devices.
Use ZIPLinks to reduce
power requirements
If your application requires a lot of relay
outputs, consider using the ZIPLink AC or
DC relay output modules. These modules
can switch high current (10A) loads
without putting a load on your base power
budget. Refer to the Terminal Blocks and
Wiring Solutions section in this catalog for
more information.
This logo is placed next to the I/O
modules that are supported by the ZIPLink
connection systems. See the I/O module
specifications at the end of this section.
Device
D2-03B-1
Operator Interface
DV-1000
150
0
C-more MicroGraphic
210
0
5V(mA) 24V Auxiliary
Bases
D2-06BDC1-1
$194.00
2600
None
None
D2-06BDC2-1
$184.00
2600
300
D2-04B-1
300
D2-09B-1
$220.00
2600
300
D2-04BDC1-1 $171.00 2600
None
D2-09BDC1-1
$238.00
2600
None
D2-06B-1
300
D2-09BDC2-1
$238.00
2600
300
$132.00 2600
$143.00 2600
$176.00 2600
Power Consumed
Power Consumed
Device
5V(mA)
24V Auxiliary
Device
5V(mA)
24V Auxiliary
Analog Modules
CPUs
D2-230
120
0
F2-04AD-1
100
5
D2-240
120
0
F2-04AD-2
110
5
D2-250-1
330
0
F2-08AD-1
100
5
D2-260
330
0
F2-08AD-2
100
5
H2-WPLC*-**
680
0
F2-02DA-1
40
60 (note 1)
F2-02DA-1L
40
70 @ 12V (note 1)
0
F2-02DA-2
40
60
40
70 @ 12V
DC Input Modules
D2-08ND3
50
D2-16ND3-2
100
0
F2-02DA-2L
D2-32ND3
25
0
D2-32ND3-2
25
0
F2-02DAS-1
F2-02DAS-2
100
100
50 / channel
60 / channel
F2-08DA-1
30
50 (note 1)
F2-08DA-2
60
140
F2-4AD2DA
60
80 (note 1)
F2-8AD4DA-1
35
100 (note 1)
F2-8AD4DA-2
35
80 (note 1)
F2-04RTD
90
0
F2-04THM
110
60
AC Input Modules
D2-08NA-1
D2-08NA-2
D2-16NA
50
100
100
0
0
0
Input Simulator Module
F2-08SIM
50
0
DC Output Modules
D2-04TD1
60
20
D2-08TD1
100
0
D2-08TD2
100
0
200
200
80
0
F2-16TD1P
70
50
F2-16TD2P
70
50
D2-32TD2
24V Auxiliary
Price
D2-03BDC1-1 $150.00 2600
D2-32TD1
5V(mA)
Device
300
D2-16TD2-2
Device
Power Supplied
Price 5V(mA) 24V Auxiliary
Bases
D2-16TD1-2
Power Consumed
HERE
350
350
0
0
AC Output Modules
D2-08TA
250
0
F2-08TA
250
0
D2-12TA
350
0
Relay Output Modules
D2-04TRS
250
0
D2-08TR
250
0
F2-08TR(S)
670
0
D2-12TR
450
0
Combination In/Out Module
D2-08CDR
200
0
Specialty Modules
D2-CTRINT
50*
0
D2-CM / D2-EM
100/130
0
H2-CTRIO
400
0
H2-CTRIO2
275
0
D2-DCM
300
0
F2-DEVNETS
160
0
F2-SDS-1
160
0
H2-PBC
530
0
H2-EBC100
300
0
H2-EBC-F
640
0
H2-ECOM100
300
0
H2-ECOM-F
640
0
F2-CP128
235
0
H2-ERM100, (-F)
300, (-F: 450)
0
D2-RMSM
200
0
D2-RSSS
150
0
Remote I/O
Programming Devices
D2-HPP
200
0
*requires external 5VDC for outputs
Note 1: Add an additional 20 mA per output loop.
Book 1 (14.1)
eD2-46
DL205 PLCs
1 - 80 0 - 633 - 0405
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement