Coats Kit 85609110 Balancer Adapter Wall Storage Board Extension Instruction

Balancer Adapter Wall

Storage Board Extension

Kit 85609110

Balancing Solutions

Before You Begin

The Wall Storage Board Kit consists of the following parts:

No. Qty. Description

Ⓐ 85609108 1 Storage Board Extension

Ⓑ 8113094 3 Hook

Ⓒ 8107091 3 Grip

Ⓓ 8106303 6 3/8-16 UNC Locknut

Verify that you have received all of the parts listed.

Assembly and Installation

1.

Install the Grips onto the Hooks if not already installed.

(Fig. 1)

2.

Install each Hook onto the Storage Board using two

3/8-16 UNC Locknuts as shown in figure 1. Hand-tighten the

Locknuts (very snug), leaving the threaded portion of the

Hook flush with the Locknut. Make sure the Hooks are pointing upward toward the label.

3.

Mount the assembled Storage Board Extension to the existing board as shown (Fig. 2).

Existing

Storage

Board

Existing

Storage

Board

Ⓐ

Mounting

Hole

Ⓓ

Ⓑ Ⓒ

Figure 1 - Hook Assembly

Diagram

Storage Board

Extension

Mounting

Hole

Figure 2 - Assembled Wall Storage Board

85609109 00 09/13 1 of 1 © Copyright 2013 Hennessy Industries and COATS All Rights Reserved