Manual_CC Witness
INSTRUCTION
MANUAL
PLEASE READ ALL THE INSTRUCTIONS COMPLETELY BEFORE USE
AND SAVE THIS MANUAL FOR FUTURE REFERENCE
Preface
Thank you for purchasing the CC Witness+. Please read important safety instructions on page 33 before use.
It is important to read and understand all instructions. Keep these precautions and instructions where all who use the
CC Witness + will read them. If you misplace this manual you can always download another copy from;
www.ccrane.com/instruction-manuals/CCWitnessplus
Introduction
The CC Witness+ combines the latest digital audio engineering with an AM/FM radio. With this device you can record
almost anything that makes audio into a digital audio file. Schedule up to 20 timer recordings or record manually by
pressing one button.
CC Witness+ recordings are selectable in six levels of recording quality. The CC Witness+ can also play and record
from its built-in AM/FM radio.
Unpacking
The box should contain the CC Witness+, USB computer cable, stereo earbuds, FM wire antenna, 1/8" stereo line-in
cable, lanyard, and this manual. If anything is missing or damaged, please contact your dealer immediately.
We recommend you keep the box in the unlikely event your product needs to be serviced.
Page 2
CC Witness+
Product Highlights
• Good AM/FM Reception.
• File dividing: From one file into several.
• Records in MP3 (32 - 192 kbps) or WAV (CD quality).
• FM Mono option.
• Highly sensitive, built-in stereo microphones.
External microphone can be attached through
“Mic/Line-In” Jack.
• 20 Timers for recording or playback at specified time
& date settings.
• Sleep mode in 15, 30, 60, 90, 120, 180, 240, and
300 minutes.
• Plays MP3, WMA, or WAV (CD quality).
• 10 presets per band.
• Voice recording with stereo microphones.
• Playback Modes: Play All, Play Once, Repeat All,
Random Play, Repeat.
• Equalizer modes: Normal, Classic, Live, Pop, Rock,
Jazz, Voice (low cut), and Filter-High.
• Internal storage (2GB).
• Add up to 16GB of memory storage to the CC Witness+
by inserting an optional SD card.
(2-4 GB cards recommended for best compatibility).
• Files can be copied to SD card or internal memory.
CC Witness+
• File rename function.
• Key lock function to prevent unintentional operation.
• Digital volume control (30 steps).
• Fast forward/rewind: Search at 3 seconds/7 seconds/
1 minute/2.5 minutes.
• USB 2.0 interface for easy data transfer to and from
a computer.
• Internal Stereo Speakers (0.6W each).
• Stylish design and sturdy exterior with a wide LCD
screen to maximize the display.
• Long lasting Li-ion polymer rechargeable battery
(5V 900mA).
Page 3
Table of Contents
Preface ............................................................................ 2
Radio Reception Tips......................................13
Product Highlights .......................................................... 3
“FILES” ......................................................................13
Open Folder or Play File...................................14
Close Folder or File...........................................14
Mark File as Favorite..........................................14
Lock a File..........................................................14
Unlock a File......................................................14
“SETTINGS” ...................................................................15
Play Settings.......................................................15
.-Folder Views................................................15
..-Playback Modes............................................16
Record Settings.................................................16
...-AM Quality......................................................16
...-FM Quality......................................................16
...-Line In Quality................................................16
...-Mic In Quality.................................................16
...-Mic/Line Choice............................................17
...-Create Tracks.................................................17
Sound Settings...................................................17
...-Play Equalizer................................................17
...-3D Effect ON/OFF..........................................17
...
-Beep ON/OFF................................................17
Quick Start Guide ........................................................... 6
Buttons and Component Identification ........................ 7
Display Identification and Icons ..................................... 8
Getting Started ............................................................... 9
Charging the Battery ........................................ 9
Lock Switch .................................................... 10
Display Screens and Functions....................................11
“MENU” ......................................................................... 11
AM and FM Radio..............................................11
Files ................................................................. 11
Settings ........................................................... 11
Timers............................................................... 11
Record from Mic or Line-In........................ 12
“AM and FM” Radio ......................................................12
Playing AM or FM Radio.................................12
Tuning Stations..................................................12
Preset a Station to Memory.............................12
Recall a Memory Preset...................................12
Delete a Memory Preset................................. 12
Record a Radio Station................................... 12
Page 4
CC Witness+
Table of Contents
Erase Files(s)......................................................22
...-Default Volume..............................................17
Rename File(s)....................................................22
...-Speaker Control............................................18
Copy File(s).........................................................22
...-FM Mono........................................................18
Divide File...........................................................22
Display Settings.................................................18
Mark File..............................................................22
...-AM Display.....................................................18
Clear Marks........................................................23
-Backlight Time................................................18
-LCD Control...................................................18 FILE PLAY........................................................................23
-ID3 Tag............................................................18 RECORDING.............................................................24
System Settings.................................................19 Transferring Files To and From a Computer.....................25
-Time and Date..............................................19 Disconnecting From the Computer................................25
-Sleep Timer...................................................19 FAQs and Troubleshooting ............................................ 26
-Auto OFF Time..............................................19 Glossary of Buttons and Components .....................27-30
...-Factory Defaults.........................................19
Glossary of Icons ........................................................... 31
...-Format Memory...........................................19
Specifications ............................................................... 32
...-File Name Format......................................19
Safety Instructions ........................................................ 33
-10 or 9 kHz.................................................20
Optional CC Witness+ Accessory Kit .......................... 34
-Memory Info....................................................20
“TIMERS” .......................................................................20
Set Timers...........................................................20
Review Timers....................................................21
All Timers ON/OFF.............................................21
“EDIT” .............................................................................22
CC Witness+
Page 5
Quick Start Guide
Fully charge the Battery before use. See page 9.
Press and hold the PLAY button (in the middle) for 2 seconds to turn the power “ON”.
Note: The “MENU” screen is the starting point for all functions. You can access the “MENU”
screen at any time by pressing the MENU button.
To Highlight an item = Use the UP or DOWN arrow buttons.
To Select an item = Press and release the PLAY button.
To Return to “MENU” = Use the MENU button.
1. To Set Time and Date — From the “MENU” screen, highlight and then select “Settings”. Highlight and then select “System
Settings”. Highlight and then select “Time and Date”. Use the RIGHT and LEFT buttons to move between hours, minutes,
months, days, and years. Use the UP and DOWN buttons to modify the highlighted item. Use the PLAY button to save
changes. Return to MENU by pressing the “MENU” button.
2. To Play AM Radio — From the “MENU” screen, Highlight and then select “AM”. Use the RIGHT or LEFT arrow buttons to
select a radio frequency. See page 12 for more information.
3. To Play FM Radio — From the “MENU” screen, Highlight and then select “FM”. Use the RIGHT or LEFT arrow buttons to
select a radio frequency. Earbuds, or the included wire antenna, function to improve the FM radio reception.
See page 12 for more information.
4. To View and Play Files or Recordings — From the “MENU” screen, Highlight and then select “Files”. Highlight and then
select a folder to view the files within. Highlight and then select the file you wish to play. See pages 13, 14, and 23 for more
information.
5. To Set or Review Timers — From the “MENU” screen, Highlight and then select “Timers”. Highlight and then select “Set
Timers”. Use the RIGHT and LEFT buttons to change to the Timer you wish to set or review. Use the UP and DOWN
buttons to move between highlighted items. Use the RIGHT and LEFT buttons to modify a highlighted item. When finished,
press the PLAY Button to save your timer. See page 20 for more information.
6. To Record from the Internal Microphone or LINE/MIC Jack — From the “MENU” screen, press and release the REC
button. To quit recording, press the REC button again. For more information about recording, see pages 12 and 24.
Page 6
CC Witness+
Button and Component Identification
Front
Right
Side
}
q
w
e r
Left
Side
{
Q
e t
y
u
W
P
E
O
R
I
Q
W
E
R
T
U
Y
REC (Record) Button
UP Button
BACK Button
INT/SD A< >B Button
RIGHT Button
CC Witness+
T
Bottom
i o
Y
U
I
O
P
{
}
q
PLAY Button
DOWN Button
LEFT Button
PLAY SPEED Button
MENU Button
EDIT Button
RESET Button
RIGHT SPEAKER
w
e
r
t
y
u
i
o
VOLUME + – Button
STEREO MICS
LOCK SWITCH
MIC/LINE IN Jack
LEFT SPEAKER
SD CARD SLOT
USB CONNECTION
HEADPHONE Jack
(Buttons are explained further on Page 27).
Page 7
Display Identification and Icons
Main Menu
p
[
D
]
Play File
S
A
F
g
f
d
s
a
Record from Radio
Record from Mic
G
H
J
K
L
:
z
h
j
;
l
p
[
]
A
S
D
F
G
Page 8
Main Menu, see page 11
Speakers Off, see page 18
Battery Strength Indicator, see page 10
AM RADIO (highlighted for selection)
Sleep Timer On, see page 19
FILES menu title, see page 15
Time elapsed in Playback
PLAY Speed Symbol, see page 23
H
J
K
L
:
a
s
d
Name of File being played
Progress Bar
Playback Mode, see page 16
Favorite File symbol, see page 14
File Locked symbol, see page 14
Marked File symbol, see page 22
Recording Quality see page 16
Marked Spot in File, see page 23
k
f
g
h
j
k
l
;
z
Folder Name
Number of Files in Folder
Time elapsed in Recording
RECORD Symbol
RECORD QUALITY, see page 16
Amount of Recording Time Available
Time elapsed in Recording
SD Card selected, see page 9
CC Witness+
Getting Started
Computer Charging: Using the supplied USB cable,
connect the mini USB connector end to your CC Witness+
at the mini USB Connection.
Connect the opposite end (with the regular USB plug) to
your computer. When connected, the screen will display
“USB Connected”. (While connected to a Windows 2000 or
Windows XP computer, it is possible to play the
CC Witness+, but you must de-activate the data transfer
between the CC Witness+ and your computer.)
See page 25.
AC Adapter Charging (optional): Using the AC Adapter,
connect the power plug to 120V AC power. Connect
opposite end (Mini USB connector) to the bottom of the
CC Witness+ at the Mini USB Connection.
charged battery is significantly less than it used to be (80% of
original run time) or the unit becomes excessively hot during a
charge cycle, these are good indicators that it is time to replace
the battery.
Battery industry professionals state that Lithium rechargeable
batteries should not be used or stored in environments that
exceed 60 C (140 F). For these reasons the CC Witness Plus
should not be stored in a location that can reach high temperatures
such as a closed automobile or sunny window ledge.
High temperatures can cause the battery to fail.
Charging using the
AC Adapter (optional)
Note: The Mini USB connector will only insert one way.
Do not force the plug “in”. While connected to the AC power
adapter, you will be able to play and use the CC Witness+
as normal.
Note: If your CC Witness+ is used and charged daily then
it is best to replace the battery every two years. There is a
chance of overheating near the end of the normal life cycle
of any lithium type battery.
Note: The CC Witness Plus includes a Lithium-Ion battery pack
and safety precautions are necessary with this type of battery.
Typically, any device with rechargeable lithium batteries should
have the battery replaced after approximately 300-500 charge
cycles (or two to three years). If you notice playback on a fully
CC Witness+
Note: In some cases you will get better AM reception with
the AC Adapter disconnected.
Disconnect from Charging: You can stop charging at any
time. To remove Mini USB Connector, pull it out gently.
Page 9
Getting Started
Battery Level Icon:
LOCK SWITCH
To turn the CC Witness+ LOCK Switch “On”, slide the
LOCK Switch “up”.
Full Battery
Low Battery
Before using the CC Witness+, check the LOCK switch to
be sure it is off. While the LOCK switch is on, all buttons will
be disabled.
Recharge Battery
Battery Life: On a fully charged battery, the CC Witness+
will record for about 8 hours or play for 14 hours. The
internal Li-ion polymer battery should last many years with
regular use. In the unlikely case that the battery fails, we
recommend sending the product to C. Crane Company, as
disassembly and battery replacement is difficult.
See page 33.
Page 10
To turn the CC Witness+ LOCK function “Off”, slide the
LOCK Switch “down”.
Note: You can turn the LOCK function “On” while the
CC Witness+ is in operation. If a button is pressed while the
LOCK function is “On”, the display will show the time and
date.
CC Witness+
Display Screens and Functions
“MENU”
Power “On” — Press and hold the PLAY Button for 2
seconds.
Note: Charge the Battery before use. See page 9.
The “MENU” screen is the first screen that is displayed
upon startup and is the starting point for all functions. You
can access the “MENU” screen at any time by pressing the
MENU button. The “MENU” screen has 5 functions: AM,
FM, Files, Settings, and Timer.
Use the UP and DOWN Buttons to highlight one of the
menu items.
Use the PLAY Button to select the menu item.
1. To Play AM Radio — Highlight “AM”. Then press and
release the PLAY Button. Then use the
RIGHT Button and LEFT Button to scroll through the
radio frequencies.
2. To Play FM Radio — Highlight “FM”. Then press and
release the PLAY Button. Then use the
CC Witness+
RIGHT Button and LEFT Button to scroll through the
radio frequencies.
3. To View and Play Files or Recordings — Highlight
“Files”. Then press and release the PLAY Button.
Use the UP and DOWN Buttons to highlight a
folder. Then press and release the PLAY Button to
select the highlighted folder and view the files within.
Highlight a file you wish to play using the UP and
DOWN Buttons and then press and release the PLAY
Button to play it. See page 23 for more information.
4. To View and Configure Settings — Highlight
“Settings”. Then press and release the PLAY Button
Button. Use the UP and DOWN Buttons to highlight a
Setting. Then press and release the PLAY Button to
select the highlighted setting and view the Settings
options. Highlight the Setting you wish to configure
using the UP and DOWN Buttons and then press and
release the PLAY Button.
See page 15 for more information.
5. To Set or Review Timers — Highlight “Timers”, then
press and release the PLAY Button. Use the UP
and DOWN Buttons to highlight “Set Timers”. Then
press and release the PLAY Button to select the
highlighted item. Use the RIGHT and LEFT buttons to
change to the Timer you wish to set or review. Use the UP
and DOWN buttons to move between highlighted
items. Use the RIGHT and LEFT buttons to modify a
highlighted item. When finished, press the PLAY Button
Page 11
Display Screens and Functions
to save your timer. See page 20 for more information.
6. To Record from Mic or Line-in Jack— While in menu
screen, press and release the REC Button to record
from the internal microphone or LINE/MIC jack.
“AM” AND “FM” RADIO SCREEN
the “MENU” screen, then press and release the PLAY
Button. The radio will play automatically. To exit, press
the MENU or BACK button.
2. Tuning Stations — Press the RIGHT Button to tune to
a higher frequency. Press the LEFT Button to tune to a
lower frequency.
3. Preset a Station to Memory —
a. While playing a radio station, press and release
the PLAY Button.
b. Select the desired preset memory number by
pressing UP or DOWN.
c. When the desired preset memory number is
blinking, press the PLAY Button to confirm.
Note: There are 10 memory presets available on each
band.
4. To recall a Station from Memory Preset — Press
the UP or DOWN to recall memory presets.
5. Delete a Station from Memory Preset — While
playing a station that is preset, press the BACK Button.
A message will ask you to confirm the deletion of the
preset. Highlight “Yes” then press the PLAY Button to
confirm.
The “AM” & “FM” radio screens have 6 functions:
1. Playing AM or FM Radio – Select “AM” or “FM” from
Page 12
6. Record a Radio Station — While playing a station,
press and release the REC button. Press again to
stop a recording.
See page 24 for more about recording.
CC Witness+
Display Screens and Functions
“FILES”
RADIO RECEPTION TIPS
AM RECEPTION TIPS:
a. AM radio reception can be further improved
by turning “OFF” the AM display while
listening. See page 18.
b. Using the CC Witness+ on the internal
battery will improve the AM reception.
c. The C. Crane Twin Coil AM Antenna will
give the CC Witness+ a large boost in AM
reception (www.ccrane.com).
FM RECEPTION TIPS:
a. When listening using the internal speakers,
improve the FM reception by using the
supplied FM wire antenna.
b. When listening using headphones, your
FM reception will be automatically improved
because the headphones become the FM
antenna.
CC Witness+
The CC Witness+ comes with 4 built-in file folders located
on internal memory. When recording, the files are
automatically saved in these folders.
1. AM radio files are stored in the “AM” files folder.
2. FM radio files are stored in the “FM” files folder.
3. Microphone files are stored in the “MIC” files folder.
4. Line-in files are stored in the “LINE” files folder.
Page 13
Display Screens and Functions
“Files” Menu Controls
Open Folder or Play File— Press the PLAY Button.
See page 27 for more information about Playing a File.
Close Folder or File — Press the BACK Button.
Mark a File as “Favorite” — Press the PLAY SPEED
Button when the file name is highlighted. Repeat this
process to remove a “Favorite” mark from a file. It is
possible to view only files that are marked as “Favorites”.
See Settings>Play Settings>Folder Views from the MENU
on page 20 for more about viewing “Favorites”.
Lock File — Press and hold the RIGHT Button to “Lock” a
file. While a file is “Locked”, it cannot be modified.
Unlock File — Press and hold the LEFT Button to
“Unlock” a file.
Main AM Folder
Example AM Subfolder
Play File — When a file is highlighted, press the PLAY
Button. See page 14 for more information about file play.
Playing a recorded
AM File
Page 14
CC Witness+
Display Screens and Functions
“SETTINGS”
The “Settings” screen is categorized into 5 main groups:
1. “Play Settings”
a. “Folder Views” — Choose how your files are
displayed when viewed.
i. “View by Folders” — This setting groups your
files into folders that are categorized by
recording source.
ii. “View all Files” — This setting groups all your
files into one area. Your computer files show
first on the top of this list, followed by AM radio
files, then FM radio files, then Timer files, then
Mic files, then Line files.
Note: Long file names will scroll after 2 seconds when the
name is highlighted.
CC Witness+
Page 15
Display Screens and Functions
iii. “View Favorites” — This setting will group
and only display files marked as a “Favorite”
L. All other files will not be displayed.
2. “Record Settings”
iv. “Spot Marked” — This setting will group and
only display files that have been “Marked”
All other files will not be displayed.
See page 23 for more information about View
Favorites and Spot Marked.
b. “Playback Modes” — Choose from 5 methods of
file playback:
“Playback All 1 Time” — This setting plays all
of the files in a folder one time in order then
stops play.
“Play 1 File 1 Time” — This setting plays the
selected file one time and then stops play.
“Repeat All” — This setting plays all files in a
folder and then continues to repeat playing the
files.
“Random Play” — This setting plays all files in
a folder at random endlessly.
“Repeat 1 File” — This setting plays the
selected file repeatedly.
a. Record Qualities — Individually adjust the
recording qualities for AM, FM, Line-in, and
Microphone.
Note: During file playback, press and hold INT/SD A< >B
Button to change between play modes.
Page 16
CC Witness+
Display Screens and Functions
Recording time is based on record quality using the internal
memory (2 Gigabytes):
32Kbps = 140 hours
64Kbps = 70 hours
96Kbps = 52 hours
128Kbps = 35 hours
192Kbps = 23 hours
CD Quality = 3 hours
Note: Available recording time is calculated on the
available free space where the file will be recorded.
b. “Mic/Line Choice” — Choose from 3 input
options for recording:
1. MIC (Mono)
2. MIC (Stereo)
3. LINE-IN (Stereo)
c. “Create Tracks” This setting is used when
recording from a CD player, tape player, record
player, or other external source. When this setting
is activated, the CC Witness+ will detect the
amount of silent space between audio tracks. When
the set amount of time without sound expires, the
CC Witness+ will automatically create a new
recording track. When “Create Tracks” is activated,
some clipping of the first part of the next audio track
may occur (usually about a half second).
To manually create your own tracks press the UP
Button while recording. Use the slide bar to adjust
CC Witness+
and set the desired amount of time without sound before
creating a new track. 3 seconds is normally good.
3. “Sound Settings”
a. “Play Equalizer” — The Play Equalizer has 8
settings: Normal (None), Jazz, Classic, Pop, Rock,
Live, Voice (Low Cut), and Filter-High. These
settings will change the sound of file in playback
only. These settings are also helpful for filtering out
high-pitched electronic noise or to improve voice on
playback of AM files.
b. “3D Effect On/Off” — When this setting is turned
“On”, the CC Witness+ will adjust file playback to
sound three-dimensional.
c. “Beep On/Off” — When this setting is turned “On”,
the CC Witness+ will make a beep sound with
every button press.
d. “Default Volume” — When the CC Witness+ is
powered-on, the volume will automatically lower
to the “Default Volume” setting. If the volume was
Page 17
Display Screens and Functions
manually set lower than the “Default Volume”
setting, it will not change at power-up.
e. “Speaker Control”
— Turns the speakers on
or off while the Witness+ is in the optional cradle
accessory.
f. “FM Mono” — When this setting is on, FM will
always play in mono.
4. “Display Settings”
remain “ON” between button presses. If set to
“Continue”, the backlight will remain “ON”.
Adjusting the Backlight Time setting is useful for
conserving battery power, as more power is used
when the backlight is “ON”.
c. “LCD Control” — Use the slider bar to adjust
the contrast of the display. When set too low, the
display will not be as visible. The default setting of
“05” is usually best.
d. “ID3 Tag” — This setting is used to display added
information that may be attached to computer audio
files. When set to “ON” and an audio file with ID3
tags is selected, the title of the file may also contain
the Artist, Album, track time, and more.
When set to “OFF” only the title of the audio file will
be displayed. Most ID3 tags can be viewed and
edited with a Windows computer by selecting the
file “Properties”, then selecting the “Summary”
tab.
a. “AM Display” — This setting is used to improve
the AM radio reception by turning the display
screen “OFF”. If any button is pressed, the display
screen will turn “ON” for three seconds, then turn
“OFF” again.
b. “Backlight Time” — Use the slider bar to set the
amount of time that the display backlight is to
Page 18
CC Witness+
Display Screens and Functions
5. “System Settings”
a. “Time and Date” — Use the RIGHT and LEFT
buttons to move between hours, minutes, months,
days , and years. Use the UP and DOWN buttons
to modify the high-lighted item. Use the PLAY
Button to save changes. Use the MENU or BACK
to exit without saving.
b. “Sleep Timer” — The Sleep Timer can be set to
play for 15, 30, 60, 90, 120, 180, 240 or 300 minutes or OFF. When that time expires, the CC Witness will power off automatically. A
icon
will appear at the top of the display to let you know
that the “Sleep Timer” has been enabled. The Sleep
Timer will be disabled if the CC Witness+ is
powered off and then on again. The Sleep Timer
can also be used to record radio shows for a
CC Witness+
specific amount of time: Set the Sleep Timer for the
time desired for recording (15, 30, 60, 90, 120, 180,
240 or 300 minutes), tune in to your desired radio
station, and press the “REC” Button. After the
amount of time has passed, the CC Witness+ will
stop the recording and power off.
c. “Auto Off Time” — This setting is used to
conserve power. There are 4 settings for “Auto Off
Time”: Off, 1, 3, and 5 Minutes. If the CC Witness+
is not playing or recording and no buttons are
pressed for the preset amount of time, it will
power off.
d. “Factory Defaults” — This is used to reset the
CC Witness+ back to the default factory settings.
This setting will not affect the Time, Date, Files,
or Timer schedules.
e. “Format Memory” — Choose to format the internal or (optional) SD card memory. When memory
is formatted, all files on the selected memory are
permanently erased. It is best to format a new or
previously used SD card before recording files to
it. Use ca uti o n whe n fo r ma tti ng me mo r y, a s i t
p e rm a n e n t l y e ra s e s y o u r f i l e s !
f. “File Name Format” — Choose which style of automatic file naming to use. When “Simple File #” is
selected, file names from recordings will display
only the month, day, track number, and recording
source. When “Date_Time_#_Freq” is selected, file
Page 19
Display Screens and Functions
names from recordings will display month, day,
year, time, track number, freq/recording source, and
format.
g. “10 or 9 KHZ” —If using the CC Witness+ to listen
to AM radio in Europe, use this setting to switch
AM Radio to 9kHz AM tuning steps.
Note: All timer schedules and radio station
memory presets will be erased when switching
between 10kHz for North America and 9kHz
tuning steps for Europe. You may want to write
down your presets before using this function.
h. “Memory Info” — This screen will display the
total and free amount of memory remaining for the
Internal and (optional) SD card memories. Also, the
firmware version will be displayed at the bottom of
this screen.
“TIMERS”
The “Timers” screen has three main functions:
1. “Set Timers”
Use the RIGHT and LEFT buttons to modify timer
settings. Use the UP and DOWN.
Page 20
CC Witness+
Display Screens and Functions
buttons to move to the next or previous timer
setting. When all settings are set, save the timer
setup by pressing the PLAY Button.
Timer Settings explained:
“Timer” — Select which timer, by number, to setup.
There are 20 timers available in the CC Witness+.
“Status” — Choose whether the timer will “Record”
or “Play” when activated. Set to “OFF” to reset timer
back to default settings.
“Memory” — Choose to record or play using the
“Internal” or the (optional) “SD Card” memory.
“Source” — If the timer “Status” is set to record,
then select which source (“AM”, “FM”, “MIC”, or
“LINE”) to record from. If the timer “status” is set to
play, then select which source (“AM” radio, “FM”
radio, or a saved “File”) to play from.
“Preset” — If you have set radio stations to memory
presets, then you can select them in this setting.
“Freq” — Manually tune to the desired radio station.
“Day(s)” — Choose to play or record on a specific
“Date” or “Weekday”. If “Weekday” is selected, then
by default every day will be selected to activate the
timer. To choose specific days, highlight “Daily” and
press the RIGHT or LEFT button to bring up a
weekday selection screen. Mark or unmark week
days by pressing the DOWN button. When finished,
press the PLAY Button to continue.
CC Witness+
“Start” — Sets the time when the timer will “Start”.
“End” — Sets the time when the timer will “End”.
When finished and all settings are set, press the
PLAY Button to save the setup. Confirm by
selecting “YES”. To exit the timer setup without
saving, press the BACK button, then confirm by
selecting “NO”.
2. “Review Timers”
This screen displays the status of all 20 timers. Timers
set to record are marked with an “R” next to the timer
number. Timers set to play are marked with a “P” next
to the timer number. It is possible to review and modify
a timer setting by pressing the PLAY Button when the
timer is highlighted.
3. “All Timers ON/OFF” — This setting is useful for
turning “Off” or disabling all your timers without erasing
the settings. When set from “OFF” to “On” all timers
will retain their previous setups.
Page 21
Display Screens and Functions
“EDIT”
The “EDIT” screen has 6 functions:
Note: The “EDIT” screen can only be accessed with the
EDIT Button when a file is highlighted, playing or paused.
1. “Erase File(s)” — Erase unwanted files to free up
memory space and reduce clutter.
a. To erase a file, you must have the file title
highlighted or be playing the file.
b. Select “Just This File” to erase only the file that is
selected. Select “All in Folder” to erase all files in
the currently selected folder.
c. To cancel the operation, press the BACK, or the
MENU buttons.
2. “Rename File” — Gives file a unique name that helps
you identify it.
a. To rename a file, you must have the files name
highlighted or be playing it.
b. Change the name using the arrow keys and PLAY
button to select characters.
c. When finished, press the DOWN arrow key until
you see “DONE”, then highlight and select it.
3. “Copy File(s)” — Copy one file or all files in a folder
from the internal memory to the (optional) SD card or
from the SD card to the internal memory.
a. To copy a file, you must have the file title
Page 22
highlighted or be playing the file.
b. Select “Just This File” to copy only the file that is
selected. Select “All in Folder” to copy all files in
the currently selected folder.
c. Select a location on the other memory source to
copy the file to. Use the RIGHT and LEFT buttons
to open or close folders, and the UP and DOWN
buttons to view folder contents. Press the PLAY
button to select the location.
4. “Divide File” — Divide an MP3 file in half or at the
point where the file is paused. WAV files (CD quality)
cannot be divided.
a. To divide a file you must have the fileʼs title
highlighted or be playing the file.
b. Select “Divide in half” to divide the file into two
even halves. If file play is paused, select “Divide
at Pause” to divide the file at the pause point.
Note: When a file is divided, two additional files are created
and the original file remains intact. The first additional file
will retain the original file name but with “_A” added to the
end. The second additional file will also retain the original
file name but with “_B” added to the end. If either of the
additional files is divided again then this process will repeat.
5. “Mark File” — Mark a file as “Favorite File” or “Mark
Spot” to bookmark a play location in a file for later
reference.
a. “Mark Spot” — While playing a file select “Mark
CC Witness+
Display Screens and Functions • File Play
Spot” to a reference point above the play bar.
You can skip instantly to a marked spot while
playing a file by pressing and holding the LEFT
or RIGHT arrow keys for 2 seconds.
Note: It is also possible to mark or unmark a spot by
pressing the BACK Button while playing. After 30 seconds,
another spot can be marked. A maximum of four spots can
be marked in a file.
b. “Favorite File” — While playing a file, select
“Favorite File” to mark it as a favorite.
Note 1: “Favorite File” can also be marked while play is
stopped, by pressing the PLAY SPEED Button when the
file name is highlighted. Repeat this process to remove a
favorite mark from a file.
Note 2: It is possible to view only files that are marked as
“Favorite File” or “Spot Marked”. See “Folder Views” on
page 15 for more about viewing options.
6. “Clear Marks” — Remove “Favorite File” mark or
“Marked Spot” (bookmarks) from a file.
a. “Clear Spot” — While a file is playing or
high-lighted, select “Clear Spot” to remove all
previously marked spots from a file.
b. “Clear Favorite” — While a file is playing or
high-lighted, select “Clear Favorite” to remove the
“Favorite File” status.
CC Witness+
FILE PLAY
To locate and view files to play, select “Files” from the
MENU and then press and release the PLAY Button. Select
the folder and press and release the PLAY Button to open
the folder to view files. Select the file, then press and
release the PLAY Button to play the file.
Pause — Press the PLAY Button to pause a playing file.
Press again to resume play.
Stop — Press the BACK Button to stop a paused file.
Fast-Forward — Press the RIGHT Button. Press again for
faster speeds.
Rewind — Press the LEFT Button. Press again for faster
speeds.
NOTE: There are 4 speed levels for “Fast Forward” and
“Rewind”: 3,7, 60, and 150 times normal play speed. To
change, press the LEFT or RIGHT arrow Button again.
Play Next File — Press the DOWN Button.
Play Previous File — Press the UP Button.
Change Play Speed — Press the PLAY SPEED Button.
Press again to cycle through five play speeds.
NOTE: There are 5 play speeds:
,
,
,
, and
normal. It is not possible to change play speeds for
WAV (CD quality) files.
Page 23
FILE PLAY....Continued from page 23.
Recording
Change Playback Mode — Press and hold INT/SD A< >B
Button to change between play modes.
RECORDING
Repeat a Section — Press the INT/SD A< >B Button to
mark a section of a file to be repeated. Any section of the
currently playing file can be repeated by pressing and releasing at the desired section (A) and then again at the end
of the desired section (B). Play will repeat between (A) and
(B) until INT/SD A< >B is pressed again.
Note: This function is great for learning a new language;
you can repeat a section of the lesson over and over again.
Note: While playing a file, the main menu can be accessed
by pressing the MENU Button. The file will continue to play
unless “AM” or “FM” radio is selected from the main menu.
To return to the playing file, press the MENU Button again.
There are 3 ways to make recordings:
Manual Recordings — Press REC button while in a
mode like AM or FM. If you are in the Menu or File
screen, and you press REC, it will record from internal
mic or external line-in/ mic.
One-Touch Recordings — By pressing the REC button,
you can choose to record for 1, 2, 3, or 4 hours. This is
perfect for recording talk shows or snippets of shows
quickly.
Timed Recordings are made with timers and
scheduled for specific times on a day, week or date.
For more information on setting and using Timers, see
page 20.
To stop a recording, you must wait until you have recorded
for five seconds then press the REC or MENU button. To
create a new recording track while recording, press the UP
Button. To pause or unpause a recording, press the PLAY
Button. When the recording is completed, it will be stored in
“Files” in the “AM”, “FM”, “Mic”, or “Line” folder.
Note: The save location for a recorded file depends on
what source you were recording from. See page 13 for
more information.
Page 24
CC Witness+
Transferring Files To and From a Computer
TRANSFERRING FILES TO AND FROM
A COMPUTER
Using a PC:
1. Connect the CC Witness+ to a PC using the supplied
USB cable at the USB Connection.
2. Click on the ʻComputerʼ icon on the PC. Look for
a removable disk icon, usually displayed as Drive E
or F.
3. Double click on the disk icon belonging to the
CC Witness+.
4. Files from the PC can now be downloaded onto the
CC Witness+ via dragging and dropping, copying and
pasting, etc. Likewise, files can be uploaded to the PC
from the CC Witness+ using these methods.
Using a Mac:
1. See PC instructions for item 1.
2. The CC Witness+ will be displayed on the Mac
desktop as an external drive icon.
Proceed with Items 3 and 4 from PC instructions.
Note 1: If transferring files to the CC Witness+, we
recommend using your computer to create a new folder on
the CC Witness+ for organizational purposes.
Note 2: You can also transfer files from the internal memory of the CC Witness+ to an SD card. See page 26.
CC Witness+
DISCONNECTING THE CC Witness+ FROM
A COMPUTER
Before unplugging the CC Witness+, it is necessary to
de-activate the link between them. While de-activated, the
CC Witness+ will continue to charge. You will not be able to
transfer files while the CC Witness+ is de-activated unless
the USB cable is removed and re-inserted.
De-activate from a PC: Left click the “Safely Remove
Hardware” icon that is found in the bottom-right toolbar.
Click “Safely Remove USB
Mass Storage Device —
Drives”.
De-activate from a Mac: Drag the
external drive icons that were added
when you connected your CC Witness+
to the trash can (usually found in the
Dock). Another method is to ControlClick and select “Eject” from the dropdown menu (as shown at right).
MAC Note: When using a computer to
charge the CC Witness+ , regular functionality will not be possible until the
USB cable has been removed. While connected, the CC
Witness+ will continue to charge normally. If the optional
AC Adapter is used, it will be possible to charge and play
simultaneously.
Page 25
FAQs and Troubleshooting
Yes, on the FM band, the built-in microphones, or the
Mic/Line Input.
1. Does the CC Witness+ record in Stereo?
Because the processor takes a few seconds to create
a new recording, you may have to manually create a
new track while recording. See page 24.
track from being clipped?
Yes, the CC Witness+ receives FM Stereo.
7. The CC Witness+ is stuck. What do I do now?
Yes, when the progress bar reaches the Spot marked,
press the BACK button to clear that Mark.
8. The CC Witness+ will not turn on.
2. Does the tuner receive FM Stereo?
3. Can I clear one “Spot Mark” at a time?
4. How do I upgrade the firmware on the CC
Witness+ ?
When CC Witness+ firmware upgrades are available,
they will be posted for download at
crane.com/CCWitness
The CC Witness+ shuts off automatically if it remains
idle for 3 minutes. This is the factory default setting.
You can adjust the amount of time that passes before
auto shut-off occurs by configuring the “Auto Off Time”
function in the “System Settings” menu options.
See page 19.
5. Why does the CC Witness+ keep shutting off?
6. When I record from a CD player using “Create
Tracks”, how do I keep the first part of the next
Page 26
Press the “RESET” Button on the side. All files and
settings will be retained.
Press the “RESET” Button on the side. Then press
and hold the PLAY Button for five seconds. If this does
not work, then try charging the CC Witness+ for a few
hours.
9. The CC Witness+ will not record. An error
message displays “File index full”.
The CC Witness+ can view a maximum of 2000 files,
or 500 folders on a memory source. When the file or
folder limit is reached, it will not be possible to record
on the selected memory source. Remove files, folders
or change memory source with the INT/SD button to
restore recording capabilities.
For more troubleshooting information see:
ccrane.com/CCWitness or email us at:
[email protected]
Let us know what youʼve learned.
CC Witness+
Glossary of Buttons and Components
Q
REC (Record) BUTTON and LIGHT
The REC Button has 7 functions:
a. It records AM or FM radio.
b. It will record from the internal microphone or an
external microphone plugged into the Line/Mic input.
c. Stops a recording.
d. Stops play of a timer activated file or recording.
e. Hold to time record for 1, 2, 3, or 4 hours.
f. Flashes when powering off when a timer is set.
g. The red light comes on when a timer activates.
W
UP BUTTON U
The UP Button has 6 functions:
a.
b.
c.
d.
e.
f.
E
Highlights items for selection.
Toggles through preset radio stations
Toggles through files while playing.
Creates a new track when recording.
Stops a paused file and highlights file.
Increments selected items in the “Time and Date”
setup.
BACK BUTTON
The BACK Button has 4 functions:
a. Exits current folder, function, or menu to previous
CC Witness+
location.
b. Activates option to delete saved preset while playing
AM or FM radio.
c. Marks spot in a file, while playing a file.
d. Stops a paused file and highlights it.
R
INT/SD A< >B BUTTON
The INT/SD A< >B Button has 3 functions:
a. Toggles between the internal memory and
SD
card memory while in AM, FM radio, or Files.
b. Marks a section of a file to be repeated.
Any section of the currently playing file can be
repeated by pressing and releasing at the desired
section (A) and then again at the end of the desired
section (B). Play will repeat between (A) and (B) until
INT/SD A< >B is pressed again.
c. During file playback, hold INT/SD A< >B to change
between play modes.
T
RIGHT BUTTON i
>
The RIGHT Button has 9 functions:
a. Toggles through the AM or FM radio frequencies.
Hold down to auto scan to next AM or FM station.
b. Opens a highlighted “File” folder.
c. Fast forwards a playing file up to 4 speeds.
Page 27
Buttons and Components
d.
e.
f.
g.
h.
Highlights items.
Increments slider bars in “Settings”.
Resets scrolling of highlighted file names.
Hold to skip to the next “Marked Spot”.
Modifies or toggles through selected timer-setup
options.
i. Locks highlighted file so it cannot be modified.
Y
PLAY BUTTON iII
The PLAY Button has 7 functions:
a.
b.
c.
d.
e.
f.
g.
U
Power On/Off by holding down.
Opens highlighted “File” folder.
Plays a highlighted file.
Pauses a playing file.
Selects highlighted item.
Saves Timer Settings.
Saves an AM or FM radio station to a memory preset.
DOWN BUTTON I
The DOWN Button has 5 functions:
a.
b.
c.
d.
Highlights items for selection.
Toggles through preset radio stations.
Toggles to next file while playing.
Marks or unmarks select days or time of the week
in Timer Settings for recording or file playing.
Page 28
e. Increments selected items in the “Time and Date”
setup.
I
LEFT BUTTON <u
The LEFT Button has 8 functions:
a.
b.
c.
d.
e.
f.
Toggles through the AM or FM radio frequencies.
Exits current file folder.
Rewinds a playing file up to 4 speeds.
Highlights items.
Increments slider bars in “Settings”.
Modifies or toggles through selected timer-setup
options.
g. Unlocks a highlighted file.
h. Hold to go back to previous “Marked Spot”.
O
PLAY SPEED BUTTON
The PLAY SPEED Button has 2 functions:
a. Toggles a playing MP3 file through 5 play speeds.
Does not work with PCM (CD quality).
b. Marks or unmarks a file as “Favorite” when highlighted.
P
MENU BUTTON
The MENU Button has 1 function:
Toggles between “Previous Selection” and MENU.
CC Witness+
Buttons and Components
{
The EDIT Button has 1 function:
Opens and closes the file EDIT menu.
}
switch to the “down” position before using.
EDIT BUTTON
RESET BUTTON
The RESET Button has 2 functions:
a. Soft Reset – This function is useful in the unlikely
case that the CC Witness+ malfunctions or “freezes”.
Previous settings will not be erased.
i. Press the reset button one time quickly.
ii. The CC Witness+ will cycle to power-off, and then
cycle to power-on again.
b. Hard Reset – This function is useful to solve malfunctions that the “Soft Reset” is unable to repair. Except
for time and date, all previous settings will be reset to
factory defaults. All files on the internal memory will be
erased.
i. With the LOCK switch in the “up” position, press
and hold the BACK button.
ii. While continuing to hold in the BACK button, press
and release the RESET button.
iii. Continue to hold the BACK button until “Format
Please Wait … ” is displayed, then release. Formatting takes about one minute to complete.
iv. When formatting is finished, position the LOCK
CC Witness+
q
RIGHT SPEAKER
w
VOLUME + – BUTTON
The VOLUME + – Button has 30 levels of loudness. Press
and release or press and hold “+” to increase or “–” to decrease the volume.
e STEREO MICS
The internal microphones are used to make voice
recordings.
r LOCK SWITCH
The LOCK SWITCH has two positions: If moved to the “up”
position, then the CC Witness+ will be locked and all buttons will be disabled. This feature is used to prevent buttons from being accidentally pressed during travel or
storage. If a button is pressed while locked, the time and
date will be displayed, along with the “Lock Switch ON”
message. See page 10.
t
MIC/LINE IN JACK
This jack is used to record from an external source such as
a CD player, radio, or external microphone. Choose between using a MIC or LINE IN source. See page 17.
Page 29
Buttons and Components
y
LEFT SPEAKER
u
SD CARD SLOT
Add up to 16GB of memory storage to the CC Witness+
by inserting an optional SD card.
(2-4 GB cards recommended for best compatibility).
Note 1: The CC Witness+ has a limitation of viewing 2000
files per memory source. You can have 2000 files on the
internal memory and 2000 files on each SD card.
i
USB CONNECTION
The USB Connection has 2 functions:
a. While connected to a computer, it is possible to
transfer files to and from the CC Witness+.
b. When connected, the computer will charge the
CC Witness+.
CHARGING THE BATTERY
You can charge your CC Witness+ by connecting the USB
cable to a computer or by using the (optional) AC Adapter.
The total charging time takes about 5 hours. Charge the
battery before use.
The AC Adapter and a drop-in cradle are available in the
(optional) CC Witness+ Accessory Kit. They combine for
easy drop-in charging.
Charge by connecting
the USB Cable to a
computer.
Note: While connected to a Windows 2000 or XP computer, it is possible to play the CC Witness+, but you must
de-activate the data transfer between the CC Witness+
and your computer. See page 25 for more information.
o
HEADPHONE JACK
The Headphone Jack has 2 purposes:
a. To connect headphones or earphones.
b. To connect the FM Antenna Wire, for improved FM
reception, when using the built-in speakers.
Page 30
CC Witness+
Glossary of Icons
PLAY ICONS
Play file at normal speed.
Play file at half speed.
Play file at near three-quarter speed.
Play file at one-third faster than normal speed.
Play file at one-half times faster than normal.
Fast forward at 3 times normal play speed.
Fast forward at 7 times normal play speed.
Fast forward at 60 times normal play speed.
Fast forward at 150 times normal play speed.
Pause the file that is currently playing.
Rewind file at 3 times normal play speed.
Rewind file at 7 times normal play speed.
Rewind file at 60 times normal play speed.
Rewind file at 150 times play speed.
File Play, see page 27.
PLAYBACK MODE ICONS
Play all files in folder one time.
Play selected file one time.
Play all files in folder at random continually.
CC Witness+
Repeat selected file until stopped.
Repeat all files in folder until stopped.
Mark beginning of section to be repeated.
Mark end of section to be repeated.
Bookmark a file (“Mark Spot”).
File is marked as “Favorite File”.
Play Modes, see pages 9, 20, 26, & 28.
RECORD MODE ICON
Recording in progress.
Recording, see page 28.
SYSTEM SETTINGS ICONS
Optional SD card has been selected.
See page 9.
Built-in speakers have been turned off.
See page 22.
Sleep Timer function has been turned on.
See page 23.
Battery is fully charged.
See page 14.
Battery is low. Battery must be recharged.
See page 14.
File is locked.
See page 18.
Page 31
Specifications and Compatibility
POWER
3.7V 900mA Rechargeable Lithium-Polymer Battery
RECHARGING TIME
~ 4 Hours with AC Power Supply
~ 8 Hours with Computer
FREQUENCY COVERAGE
NORTH AMERICA (10kHz Steps):
AM Band: 530 - 1710 kHz
FM Band: 87.5 - 108.0 MHz
EUROPE (9kHz Steps):
AM Band: 522 - 1629 kHz
FM Band: 76.0 - 108.0 MHz
AM ANTENNA
Internal Ferrite
FM ANTENNA
Earphones or FM Antenna wire
(plugged into earphone jack)
S/N RATIO
AM: 35dB
FM: 45dB at 1mV 98.1MHz
MP3: 85dB up (1kHz Input 0dB)
SENSITIVITY
AM: 68dBuV at 1kHz
FM: 5uVAT S/N=26dB
PRESETS
10 AM and 10 FM
TIMERS
20 Timer Play or Recording Schedules
SLEEP TIMER
Page 32
15, 30, 45, 60, 75, 90, 100, and 120 minutes
MEMORY
2GB Internal Memory, plus SD Card Expansion Slot
(Up to 16GB). (2-4 GB SD Card recommended for
best compatibility.)
INPUTS/OUTPUTS
Line/Mic-In (Mono or Stereo)
Stereo Headphone Jack (16Q)
Built-In Internal Microphone
Stereo Speakers (8Q 0.6W)
DIMENSIONS AND WEIGHT
2.2" W x 4" H x 0.6" D Display 1.85" diagonal
3.6 oz
INCLUDED ACCESSORIES
41" USB Cable (Mini USB Male x Type A Male)
41" 3.5mm stereo male x male cable
Stereo Earbuds
Lanyard
COMPUTER COMMUNICATION
USB 2.0
MINIMUM COMPUTER SYSTEM REQUIREMENTS
CPU 200MHz, 64MB RAM, 20MB of free space
COMPUTER OS
Windows 2000, Windows ME, Windows XP, Vista,
7, and MAC OS10 and above
COMPUTER DISPLAY
640 x 480 or better
Note: Specifications are subject to change without notice.
CC Witness+
Safety Instructions
Ꮨ
READ BEFORE OPERATING EQUIPMENT
SAVE THESE INSTRUCTIONS

To prevent damage to your radio or possible injury to you or others, read these safety precautions and instructions entirely
before applying power to your radio. Keep these precautions and instructions where all who use this radio will read them.
1) COMMON CARE 
Check the CC Witness+, and any accessories
regularly. Do not use the CC Witness+ if there is any
sign of damage. Only operate in accordance with the
instructions in this manual. Only use attachments or
accessories specified by the manufacturer.
2) BATTERY CHARGING 
See CHARGING THE BATTERY (page 9) for proper
charging methods.
3) DISCONNECT IN CASE OF MALFUNCTION 
If you smell or notice smoke, disconnect the USB Cable
or any accessories immediately taking care to avoid
burns. Contact C. Crane Company or their representative for inspection and service before any future
operation. Only use the AC adapter available with the
CC Witness+ Accessory Kit and replace it if wires
become frayed or exposed.
5) KEEP OUT OF REACH OF CHILDREN 
Dropping the CC Witness+ can cause damage or
injury. Keep the AC Adapter cord in a position so some
one cannot trip and cause the CC Witness+ to fall.
CC Witness+
6) KEEP AWAY FROM WATER AND MOISTURE 
To prevent fire or electric shock hazard, do not expose
this product to rain or moisture.
7) KEEP AWAY FROM EXTREME TEMPERATURES 
Extreme temperatures can damage the CC Witness+.
Do not leave or use the CC Witness+ where it can be
subjected to high or very cold temperatures.
8) DO NOT ATTEMPT TO SERVICE THE CC Witness+

Refer all service work to a qualified service shop if the
CC Witness+ does not appear to operate normally,
exhibits a change in performance or it has received
damage. Do not open the CC Witness+ cover, as this
may expose you to dangerous voltages and this will
void all warranties.
9) OUTSIDE ANTENNAS OR CABLES 
Outside antennas or cables should not be used with the
CC Witness+ unless installed by qualified personnel.
Page 33
Optional Accessory Kit
OPTIONAL ACCESSORY KIT
To get the most out of your CC Witness+, be sure to pick up the CC Witness+ Accessory Kit. The kit includes a
convenient Charging Cradle, an AC Adaptor, a Sport Arm Band, and a Clear Protective Cover to give your new digital
recorder an extra layer of protection.
AC ADAPTOR
A special high power, low noise AC adaptor is required for the best AM recordings from the AM/FM radio.
CARRYING CASE
Protect the fit and finish of your CC Witness+ with this custom case. Also available separately for $9.95
ARM BAND
Keeps the CC Witness+ tight and secure on your arm when walking, jogging, and other activities.
Also available separately for $14.95
CHARGING CRADLE
A Precision Cradle built for the CC Witness+. It accepts power from either the included USB cable or AC adapter with
USB connector. It has both a built-in Stereo Headphone and 1/8" mono type FM Antenna jack. The cradle back has a
semi-circular clip to hold an optional Ferrite Stick from an optional custom Twin Coil Ferrite antenna available from
C. Crane.
Page 34
CC Witness+
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK DO
NOT OPEN
THE LIGHTNING FLASH AND
ARROWHEAD WITHIN THE TRIANGLE IS A WARNING SIGN
ALERTING YOU OF “DANGEROUS VOLTAGE” INSIDE THE
RADIO.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE THE RADIO BACK. NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THE EXCLAMATION POINT
WITHIN THE TRIANGLE IS A
WARNING SIGN ALERTING
YOU OF IMPORTANT INSTRUCTIONS ACCOMPANYING THIS
RADIO.
For your future reference:
Serial No.
Name & address of dealer
CC Witness+
(Found on back of CC Witness+ )
Date of purchase
Page 35
Model: CC Witness+
ANSI C63.4: 2003
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.
1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
Notice: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate the equipment.
Copyright © 2008-2012 by C. Crane Company, Inc., Fortuna, CA 95540
Phone: 1-800-522-8863 Web: ccrane.com
All rights reserved. No part of this booklet may be reproduced, in any form or means whatsoever, without permission in writing from
C. Crane Company, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement