Venus W15 LED Moving Wash (French Lens)

Venus W15 LED Moving Wash (French Lens)
Venus W15 LED Moving
Wash (French Lens)
USER MANUAL
LED MOVING HEAD LIGHT
(OSRAM RGBW 4-IN-1
19*15W)
TABLE OF CONTENTS
1. Summary
3 Product Introduction
3 Content List
3 2. Safety Information
3 Safety notes
3 Safety instructions
4 3. Product diagram
4 4. Features
5 5. DMX Control
6 23CH
6 19CH
7 6. Display Operation Instructions
8 7. Menu Instructions
9 8. XLR cable connecting
XRL cable
11 11 9. Wiring Diagram
12 10. Trouble Shooting
13 11. Technical Specifications
14 2 Venus W15 LED Moving Wash French Lens – User Manual
1. SUMMARY
Thank you for purchasing our Venus W15 LED Moving Wash French Lense. Please
read these instructions carefully before operating the system to avoid any possible
damage or misuse.
PRODUCT INTRODUCTION
The Venus W15 LED Moving Wash has a light source that uses high powered
OSRAM 4-in-115W LED lights, each made up of R, G, B, and W LEDs which can
be independently dimmed and altered. This fixture has a long life span, low power
consumption, good colour mixing effects and high brightness. The built-in programs
include dimming, strobe, gradual change, fading etc. settings, and the rotation angles
are 540° Pan and 220° tilt. It is recommended that an international standard DMX
512 signal is used for best results.
.
CONTENT LIST
o
o
o
o
o
o
LED moving head light (x1)
Bracket (x1)
DMX signal cable (x1)
Power in cable (x1)
The user manual (x1)
Warranty Card (x1)
2. SAFETY INFORMATION
SAFETY NOTES
Seek advice from a professional prior to authoring any repairs
Always ensure the system is disconnected from the power source before assembling,
deconstructing and moving
Avoid direct eye exposure when in use
3 Venus W15 LED Moving Wash French Lens – User Manual
SAFETY INSTRUCTIONS
Ensure the power supply voltage corresponds with the required voltage for the lights,
and is within the range of the requested technical restrictions.
Before installing, check the lights’ fasteners and mechanical structures are in good
condition and there is no apparent damage.
This light is designed for indoor and outdoor use, however the working
temperature must be kept below 50 degrees.
The fixtures can be mounted in any position, provided there is adequate room for
ventilation. Make sure there are no inflammable and explosive items within 0.5 meters
of the fixture.
The yellow/green cables are for earthling safety. These should not flicker when fixture
is in use.
3. PRODUCT DIAGRAM
4 Venus W15 LED Moving Wash French Lens – User Manual
4. FEATURES
o Uses high quality LED light sources which have low power consumption, high
brightness, stable performance and a long life span.
o Uses the 32-bit ARM for dimming, with a 0-16666 - class of PWM output and
dimming frequencies up to 1.5K Hz;
o Linear dimming 0%-100%, with effects including strobe, gradual change,
jumping change etc.
o DMX512 Controller,4 button set DMX ID address with LCD display
o Auto run/ sound activated/ master slave/ interconnected multi-machine
control
o Uses switching power supply to protect the LED and enhance the
performance
o Pan 540 degrees, Tilt 220 degrees, reset function
o Focusing angles vary from 8 to 52 degree
o DMX channels optional, 19CH,23CH
o Five kinds of dimming mode,Dimmer1~4。OFF for not use. Dimming
smooth without flicker from Dimmer1 to Dimmer4, smoothness from weak
to strong respectively.
5 Venus W15 LED Moving Wash French Lens – User Manual
5. DMX CONTROL
23CH
Channel
1CH
2CH
3CH
4CH
5CH
6CH
7CH
8CH
9CH
10CH
11CH
12CH
13CH
14CH
16CH
DMX Value
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—10
11—255
0—50
51—100
101—150
151—200
201—255
0—255
17CH
18CH
19CH
20CH
21CH
22CH
0-255
0-255
0-255
0-255
0-255
0-255
23CH
0-10
11-20
21-30
31-40
41-50
51-60
15CH
Function
General dimming
Red dimming 1
Green dimming 1
Blue dimming 1
White dimming 1
Red dimming 2
Green dimming 2
Blue dimming 2
White dimming 2
Red dimming 3
Green dimming 3
Blue dimming 3
White dimming 3
Strobe off
Strobe speed(1-20Hz)
Invalid
AUTO 1
AUTO 2
AUTO 3
Keep
Automatic speed
(slow-fast)
Pan 0--540°
Tilt 0--220°
Pan fine 0—2.1°
Tilt fine 0—1.0°
X/Y speed(fast to slow)
Zoom (zoom in - zoom
out)
Use menu to set the
Dimmer
Dimmer off
Dimmer 1
Dimmer 2
Dimmer 3
6 Venus W15 LED Moving Wash French Lens – User Manual
61-254
255-255
Dimmer 4
Setted Dimmer
Reset(5 seconds)
19CH
Channel
DMX Value
Function
1CH
2CH
3CH
4CH
5CH
6CH
7CH
8CH
9CH
10CH
11CH
12CH
13CH
14CH
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—10
11—255
0-255
0-255
0-255
0-255
General dimming
Red dimming 1
Green dimming 1
Blue dimming 1
White dimming 1
Red dimming 2
Green dimming 2
Blue dimming 2
White dimming 2
Red dimming 3
Green dimming 3
Blue dimming 3
White dimming 3
Strobe off
Strobe speed(1-20Hz)
Pan 0--540°
Tilt 0--220°
X/Y speed(fast to slow)
Zoom (zoom in - zoom
out)
Use menu to set the
Dimmer
Dimmer off
Dimmer 1
Dimmer 2
Dimmer 3
Dimmer 4
Setted Dimmer
Reset(5 seconds)
15CH
16CH
17CH
18CH
19CH
0-10
11-20
21-30
31-40
41-50
51-60
61-254
255-255
7 Venus W15 LED Moving Wash French Lens – User Manual
6. DISPLAY OPERATION INSTRUCTIONS
Graphic
1
2
3
4
5
1: DMX512 DMX-IN XLR socket
2: DMX512 DMX-OUT XLR socket
3: AC POWER-IN socket AC100-240V 50-60Hz
4: FUSE 5A
5: power switch ON/OFF
8 Venus W15 LED Moving Wash French Lens – User Manual
7. MENU INSTRUCTIONS
1:Press the menu or enter button
2:Press the up and down buttons to choose to desired functions
Menu
DMX Address
001-512
Option
X reverse
No/Yes
Y reverse
XXY exchange
No/Yes
No/Yes
Dimmer mode
Off Dimmer1-4
CH mode
19CH/23CH
Display
Manual control
Language
Lightness
/English
01-32
Poorlight
Constant open/No
operation dim/No
operation off
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
CH11
CH12
CH13
CH14
CH15
CH16
CH17
CH18
CH19
CH20
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
9 Venus W15 LED Moving Wash French Lens – User Manual
CH21
CH22
0-255
0-255
CH23
0-255
Test operation
Sound
Auto
Running…
Running…
Resume default
Yes/No
Fixture reset
Yes/No
Note: When operating in the sound activated mode or automatic mode, the machine will transmit
the data as the master.
10 Venus W15 LED Moving Wash French Lens – User Manual
8. XLR CABLE CONNECTING
XRL CABLE
The standard connection of the XRL should have one end connecting to the male
plug, and the other connecting to the female.
As below: pin 1 - ground, pin 2 - negative signal, pin 3 - positive signal
Note: In order to avoid failures and interference with signal transmission, connect a
resistance 120 (1/4W)at the end of the DMX connection as shown below:
The conversion between 3 pin and 5 pin XLR.
If the output cable of the DMX512 controller is a 5PIN, a 5PIN to 3PIN cable is
necessary.
11 Venus W15 LED Moving Wash French Lens – User Manual
9. WIRING DIAGRAM
12 Venus W15 LED Moving Wash French Lens – User Manual
10. TROUBLE SHOOTING
Problem
Suggestions
Check if the power plug is working normally
The light won’t turn
Check if the light switch is off or on
on
Check if the power supply is working normally
Check if the DMX cable is connected to the light properly
The DMX is not
Check if the DMX512 controller is working normally.
controlling the light
Check if the DMX cable is damaged.
Check if the light is in DMX mode (Addr:001).
When the electricity is connected, the LED should flash once. If this is
The display is not
not the case, check the power switch and transformer.
working
Check if the power input of the IC board is working.
Check if the cable connected to the display is secure.
Change the main board to ensure that it is working properly.
Change the display.
When the electricity is connected, the LED should flash once. If this is
The LED is not
not the case, check the power switch and transformer.
light
Check if the power input of the IC board is working.
Check if the cable connected to the display is secure.
Change the main board to ensure that it is working properly.
Check if the LEDs are secure, as the LED is connected by LEDs in
Some of the LEDs
series.
are not light
Use the multimeter (diode) to check if the LED is bright or not. If not,
the LED will need replacing.
Check constant current IC is working properly (compared with the
normal IC).
13 Venus W15 LED Moving Wash French Lens – User Manual
Single color LEDs
Check if the voltage of the input end of corresponding color is
are always light/not
working.
light at all
Change the IC control board.
Note: Seek advice from a professional prior to authoring any repairs
11. TECHNICAL SPECIFICATIONS
o Input voltage: AC 100V-240V/47-63HZ
o Output voltage: DC24V
o Consumption: 320W
o Lamp Type: High power LED
o Lamp Spec: OSRAM RGBW 4-IN-1 LED (19pcs)
o Constant current drive: 1000mA (single color drive)
o Refresh Rate: above 600Hz
o Life Span: over 50000 hours
o Control Signal: DMX512/sound activated/auto run
o Control mode: stand alone/master and slaver
o DMX channels: 23CH/ 19CH
o Color effect: R, G, B, W, Mixing
o Function effect: Dimmer, strobe, gradual change, sound activated
o Pan 540 degree; Tilt 220 degree; Reset
o Pan fine2.1 degree; Tilt fine 1.0 degree
o Beam angle: 8º-52º
o Cooling mode: Fan cooling
o Protection rate: IP20
o Anti-electricity intension: 1.5KV
o Insulation resistance: >2M
o Size: 320*254*398mm
o Net weight: 15 Kg
14 Venus W15 LED Moving Wash French Lens – User Manual
15 Venus W15 LED Moving Wash French Lens – User Manual
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement