AND-G420N1
AND-G420N1 User Manual
AND-G420N1
Networking Microbox powered by
AMD GX-420MC with 6 x GbE LAN
(2-pair Bypass)
User Manual
Acrosser Technology Co., Ltd.
www.acrosser.com
AND-G420N1 User Manual
Disclaimer
For the purpose of improving reliability, design and function, the information in
this document is subject to change without prior notice and does not represent a
commitment on the part of Acrosser Technology Co., Ltd.
In no event will Acrosser Technology Co., Ltd. be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use or inability to use the
product or documentation, even if advised of the possibility of such damages.
Copyright
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic,
or other means in any form without prior written permission of Acrosser Technology
Co., Ltd.
Trademarks
The product names appear in this manual are for identification purpose only. The
trademarks and product names or brand names appear in this manual are the
property of their respective owners.
Purpose
This document is intended to provide the information about the features and use of
the product.
Audience
The intended audiences are technical personnel, not for general audiences.
To read this User Manual on your smart phone, you will have to install an
APP that can read PDF file format first. Please find the APP you prefer from
the APP Market.
2
Acrosser Technology Co., Ltd.
AND-G420N1 User Manual
Table of Contents
1. System Introduction....................................................................... 5
1.1. Specifications.............................................................................................................. 5
1.3. Packing List................................................................................................................. 7
1.4. System Dissection....................................................................................................... 8
1.4.1.Dimensions...................................................................................................... 8
1.4.2. Front I/O Panel................................................................................................. 9
1.4.3. Rear I/O Panel................................................................................................. 9
2. Assembly/Disassembly Procedures............................................11
2.1. Open the Chassis Cover............................................................................................11
2.2. SATA HDD Installation............................................................................................... 12
2.3. CF Card Installation................................................................................................... 13
2.4. Memory Module Installation...................................................................................... 16
3. BIOS Settings................................................................................ 17
3.1. Main Setup................................................................................................................ 17
3.2. Advanced Setup........................................................................................................ 18
3.2.1. W83627DHG Super IO Configuration............................................................ 19
3.2.2. W83627DHG HW Monitor.............................................................................. 19
3.2.3. SATA Configuration........................................................................................ 20
3.2.4. Serial Port Console Redirection..................................................................... 21
3.3. Chipset Setup............................................................................................................ 22
3.4. Boot Setup................................................................................................................. 23
3.5. Save & Exit Setup..................................................................................................... 24
4. Software Installation and Programming Guide......................... 25
4.1.Introduction................................................................................................................ 25
4.1.1.GPIO.............................................................................................................. 25
4.1.2.Watchdog....................................................................................................... 25
4.1.3. LAN Bypass................................................................................................... 25
4.2. File Descriptions........................................................................................................ 25
4.2.1. GPIO/Watchdog/LAN Bypass........................................................................ 25
4.3. API List and Descriptions.......................................................................................... 26
4.3.1.GPIO.............................................................................................................. 26
4.3.2.Watchdog....................................................................................................... 26
4.3.3. LAN Bypass................................................................................................... 27
www.acrosser.com
3
AND-G420N1 User Manual
5. FAQ................................................................................................ 29
Q 1. Where can I find the serial number of this product?.................................................. 29
Q 2. What if the Fedora 20 Workstation cannot be installed normally?............................ 29
4
Acrosser Technology Co., Ltd.
AND-G420N1 User Manual
1.
System Introduction
Acrosser's Microbox Networking device AND-G420N1 is powered by AMD® G-Series
GX-420MC, [email protected], 2MB L2 cache, DDR3-1600 memory (up to16GB). The
CPU supports AES (Advanced Encryption Standard) technology, making it an ideal
choice for network security vendors, encryption faster and more secured.
With a remarkable 6x Intel® GbE LAN Controller, AND-G420N1 offers the utmost
compatibility & connectivity with a mini form factor. Besides, the model can handle
2-pair LAN bypass configured via software APIs or hardware jumpers. AND-G420N1
also provides luxurious sets of I/O, including 2x USB3.0 ports, 1x SATA-II port, 1x
Console port and pin headers for 2x USB2.0 & GPIOs (4-In, 4-Out) internally.
1.1.
Specifications
System
CPU
• AMD GX-420MC, [email protected], 2MB L2 Cache
Memory
• Support DDR3 Only, (Max. capacity: 16GB)
• 2x 204-pin SO-DIMM sockets (non-ECC)
• 2G x1, 2G x2, 4G x1 (option)
Storage
SATA
• 1x SATA II connector
CF
• 1x CF card, support UDMA Type-II socket
HDD
• 1x Swappable 2.5” HDD Bay on top cover
Communication and I/O
Ethernet
• 6x PCIe x1 Intel GbE chip via RJ-45 Connector
• 10/100/1000Mbps
LAN Bypass
• 2-pair LAN Bypass (LAN1/LAN2, LAN3/LAN4)
• No wake-up feature
USB
• 2x USB 3.0 (external)
• 2x USB 2.0 (internal) pin header
Serial Ports
• 1x RS-232
GPIO
• 4x GPI
• 4x GPO
www.acrosser.com
5
AND-G420N1 User Manual
Other Features
Watchdog Timer
• Software Programmable: 0~255 seconds. (0=Disable
Timer)
Battery
• Lithium Battery, 3V 220mAH (CR2032)
Hardware Monitoring
•
•
•
•
•
CPU Voltage
CPU Temperature
System Temperature
RTC Battery Voltage
Fan Speed
Power Requirement
Power Supply
• DC in 12V / 60W adapter
Software
OS Support
• Ubuntu 14.04 (32/64-bit), Linux Kernel 3.13 (32/64-bit)
• Fedora 20 (32/64-bit), Linux Kernel 3.11 (32/64-bit)
• Text Mode Only
Mechanical & Environment
Thermal
• CPU: Fanless
• System Fan
Dimension
• 242 x 149.5 x 44 mm (W x D x H)
Operating Temperature • 0 ~ 40°C
Storage Temperature
• -20 ~ 80°C
Relative Humidity
• 0 to 90% @ 40°C, non-condensing
EMC & Safety
EMC
6
• CE, FCC Class A
Acrosser Technology Co., Ltd.
AND-G420N1 User Manual
1.3.
Packing List
Check if the following items are included in the package.
†† 1x AND-G420N1 System
†† 1x Quick Manual
†† 1x Driver CD
†† 1x Console Cable
†† 1x Power Adapter
†† 1x Power Cord
†† 1x Screw Pack
†† 1x Pull-tab Opener
www.acrosser.com
7
AND-G420N1 User Manual
1.4.
System Dissection
1.4.1. Dimensions
(Unit: mm)
44
149.5
8
48.5
242
Acrosser Technology Co., Ltd.
AND-G420N1 User Manual
1.4.2. Front I/O Panel
• LED Indicators
LED
Light
Status
Bypass 1
Green
Bypass 1 function enabled
Bypass 2
Green
Bypass 2 function enabled
HDD
Yellow
HDD active
Green
LAN1 ~ LAN6
Green
Yellow
On: 1000Mbps
Off: No link
On: 100Mbps
Off: 10Mbps
Blinking: LAN active
On: LAN not active
1.4.3. Rear I/O Panel
• DC12V
DC 12V power inlet.
• Reset
System reset button. Use a stick of less than 4mm in diameter to push this button.
• LED Indicators
LED
Light
Status
POWER
Green
Power turned on
HDD
Green
HDD active
Bypass2
Yellow
LAN 3 & LAN 4 bypass function enabled
Bypass1
Yellow
LAN 1 & LAN 2 bypass function enabled
www.acrosser.com
9
AND-G420N1 User Manual
• USB
External USB 3.0 connectors.
• Console
Pin #
Signal
Pin #
Signal
1
RTS
5
GND
2
DTR
6
SIN
3
SOUT
7
DSR
4
GND
8
CTS
• LAN1 ~ LAN6
RJ-45 Ethernet Connectors.
LED
LED1
LED2
10
Light
Status
Off
10Mbps
Green
100Mbps
Orange
1000Mbps
Yellow
Link/Active
Off
LAN Off
Acrosser Technology Co., Ltd.
AND-G420N1 User Manual
2.
Assembly/Disassembly Procedures
2.1.
Open the Chassis Cover
Step 1:
Unscrew the three screws that fixed the chassis top cover.
Step 2:
Open up the top cover.
www.acrosser.com
11
AND-G420N1 User Manual
2.2.
SATA HDD Installation
Step 1:
Use the four screws provided in the package to install your SATA hard disk into the
bracket located at the inner side of the top cover.
Step 2:
Firmly connect the SATA power and signal cable.
12
Acrosser Technology Co., Ltd.
AND-G420N1 User Manual
2.3.
CF Card Installation
Step 1:
Before inserting your CF card, you will have to stick a customized pull-tab opener to
help detaching the CF card from its card holder.
Step 2:
Peel off the protective sheet on the pull-tab opener, and stick it on your CF card as
shown below.
www.acrosser.com
13
AND-G420N1 User Manual
Step 3:
Press the pull-tab opener to make it stick firmly onto the CF card.
Step 4:
Unscrew and remove the card stopper. Insert the CF card into the card holder.
14
Acrosser Technology Co., Ltd.
AND-G420N1 User Manual
Step 5:
Push the CF card all the way into the card holder.
Step 6:
Lock the card stopper into position.
www.acrosser.com
15
AND-G420N1 User Manual
2.4.
Memory Module Installation
Step 1:
Align the notch key on the memory module with the one on the socket. Insert the first
memory module into the socket.
Step 2:
Align the notch key on the memory module with the one on the socket. Insert the
second memory module into the socket.
16
Acrosser Technology Co., Ltd.
AND-G420N1 User Manual
3.
BIOS Settings
This chapter describes the BIOS menu displays and explains how to perform
common tasks needed to get the system up and running. It also gives detailed
explanation of the elements found in each of the BIOS menus. The following topics
are covered:
• Main Setup
• Advanced Setup
• Chipset Setup
• Boot Setup
• Save & Exit Setup
Once you enter the AMI BIOS™ CMOS Setup Utility, the Main Menu will appear on
the screen. Use the arrow keys to highlight the item and then use the <Pg Up> <Pg
Dn> keys to select the value you want in each item.
3.1.
Main Setup
The BIOS setup main menu includes some options. Use the [Up/Down] arrow key to
highlight the option that you wish to modify, and then press the [Enter] key to select
the item and configure the functions.
Main
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced Chipset Boot Save & Exit
BIOS Information
BIOS Vendor
Core Version
Compliancy
Project Version
Build Date and Time
American Megatrends
4.6.5.4
UEFI 2.3.1; PI 1.2
Set the Date. Use Tab to
switch between Date
elements.
AMB-G420N1 V100-001
08/31/2015 11:22:33
CPU Information
Socket0: AMD GX-420MC SOC
Quad Core Running @ 2022 MHz 1262 mV
Max Speed: 2000 MHz Intended Speed: 2000 MHz
Min Speed: 1000 MHz
Memory Information
4080 MB (DDR3)
Total Memory
Memory Frequency
Dimm0: Not Present
Dimm1: Size=4096MB, Speed=667 MHz
System Date
System Time
[Mon 08/31/2015]
[11:22:33]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
Note:
Listed at the bottom of the menu are the control keys. If you need any help with the
item fields, you can press <F1> key, and it will display the relevant information.
www.acrosser.com
17
AND-G420N1 User Manual
• System Date
This option allows user to set the date on the system real-time clock RTC. Use your
keyboard to navigate to the month, day, or year and type in the correct numeric
value.
Note:
The Day option automatically changes when you set the Date option.
• System Time
This option allows user to set the time on the RTC. Use your keyboard to navigate to
the hour, minute, or second and type in the correct numeric value.
Note:
The time is in 24-hour format. For example, 5:30 A.M. appears as 05:30:00, and 5:30
P.M. as 17:30:00.
3.2.
Advanced Setup
Select the Advanced menu item from the Aptio Setup Utility to enter the Advanced
BIOS Setup screen. You can select any item in the left frame of the screen and press
<Enter> key to enter its sub-menu and access its parameters.
Main
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced Chipset Boot Save & Exit
Lan Bypass Function
[Disabled]
Enable or disable Lan by
pass function
W83627DHG Super IO Configuration
W83627DHG HW Monitor
SATA Configuration
Serial Port Console Redirection
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
18
Acrosser Technology Co., Ltd.
AND-G420N1 User Manual
3.2.1. W83627DHG Super IO Configuration
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced
W83627DHG Super IO Configuration
W83627DHG Super IO Chip
Serial Port 0 Configuration
Set Parameters of Serial
Port 0 (COMA)
W83627DHG
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
• Serial Port 0 Configuration
Enable or disable serial port 0 (COMA).
3.2.2. W83627DHG HW Monitor
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced
Pc Health Status
System Temperature
CPU Temperature
SYSFAN Speed
CPU Core Voltage
RTC Battery Voltage
:
:
:
:
:
+33'C
+52'C
6308 RPM
+1.261 V
+3.351 V
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
www.acrosser.com
19
AND-G420N1 User Manual
• System Temperature
This item displays the system temperature.
• CPU Temperature
This item displays the CPU temperature.
• SYSFAN Speed
This item displays the system fan speed.
• CPU Core Voltage
This item displays the VCORE voltage level.
• RTC Battery Voltage
This item displays the battery voltage level.
3.2.3. SATA Configuration
This option allows you to view and configure the SATA settings.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced
SATA
SATA
SATA
SATA
SATA
Configuration
Controller(s)
Mode Selection
Port0
Port1
[Enabled]
[AHCI]
Not Present
Not Present
Determines how SATA
controller(s) operate.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
• SATA Controller(s)
Enable or disable SATA device.
• SATA Mode Selection
Determines how SATA controller(s) operate.
• SATA Port0 ~ SATA Port1
Enable or disable serial port.
20
Acrosser Technology Co., Ltd.
AND-G420N1 User Manual
3.2.4. Serial Port Console Redirection
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced
COM0
Console Redirection
Console Redirection Settings
[Enabled]
Console Redirection Enable
or Disable.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
• Console Redirection
Enable or disable Console Redirection.
• Console Redirection Settings
This settings specify how the host computer and the remote computer will exchange
data. Both computers should have the same or compatible settings.
www.acrosser.com
21
AND-G420N1 User Manual
3.3.
Chipset Setup
Select the Chipset menu item from the Aptio Setup Utility to enter the Chipset
Configuration Setup screen. You can select any item in the left frame of the screen
and press <Enter> key to enter its sub-menu and access its parameters.
Main
Lan
Lan
Lan
Lan
Lan
1
2
3
4
5
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced Chipset Boot Save & Exit
Enable
Enable
Enable
Enable
and 6 Enable
XHCI Enable
EHCI Enable
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Lan 1 On/Off Control
[Enabled]
[Enabled]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
• Lan 1 Enable
Enable or disable system LAN1 port.
• Lan 2 Enable
Enable or disable system LAN2 port.
• Lan 3 Enable
Enable or disable system LAN3 port.
• Lan 4 Enable
Enable or disable system LAN4 port.
• Lan 5 and 6 Enable
Enable or disable system LAN5 and LAN6 ports.
• XHCI Enable
Control the USB XHCI (USB 3.0) function.
• EHCI Enable
Control the USB EHCI (USB 2.0) function.
22
Acrosser Technology Co., Ltd.
AND-G420N1 User Manual
3.4.
Boot Setup
Choose boot priority.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced Chipset Boot Save & Exit
Main
Boot
Boot
Boot
Boot
Option
Option
Option
Option
Priorities
#1
#2
#3
Sets the system boot
order
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
• Boot Option #1 ~ #3
Sets the system boot order.
www.acrosser.com
23
AND-G420N1 User Manual
3.5.
Save & Exit Setup
Main
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced Chipset Boot Save & Exit
Save Changes and Reset
Discard Changes and Reset
Reset the system after
saving the changes.
Restore Defaults
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
• Save Changes and Reset
Reset the system setup after saving the changes.
• Discard Changes and Reset
Reset the system setup without saving any changes.
• Restore Defaults
Restore/Load default values for all the setup options.
24
Acrosser Technology Co., Ltd.
AND-G420N1 User Manual
4.
Software Installation and
Programming Guide
4.1.
Introduction
Acrosser provides AND-G420N1 APIs for GPIO, Watchdog, and LAN Bypass. All
APIs are provided in ‘Libw83627.a and Libw83627.so. Users can use these files to
program its application lib_init() API before using any other APIs. And, users need
to call lib_close() to finish APIs, or to use maintest execution file to control GPIO,
Watchdog, and LAN Bypass.
4.1.1. GPIO
This model provides a GPIO interface. Users can use the GPIO APIs to configure
and to access the GPIO interface.
4.1.2. Watchdog
This model provides a Watchdog timer. Users can use the Watchdog APIs to
configure and to access the Watchdog timer. The Watchdog timer can be set to 1~255
seconds. Setting the timer to zero disables the timer. The remaining seconds of the
timer to reboot can be read from the timer.
4.1.3. LAN Bypass
This model provides two pairs of LAN ports to implement the bypass function. Users
can invoke the LAN Bypass APIs to control the bypass states of the LAN ports.
4.2.
File Descriptions
4.2.1. GPIO/Watchdog/LAN Bypass
1. Libw83627.a
The static library of the GPIO, Watchdog, and LAN Bypass APIs for accessing the
SuperIO.
2. Libw83627.h
This file includes the declarations of the APIs and macro definitions.
3. maintest
The execution file of the utility.
www.acrosser.com
25
AND-G420N1 User Manual
4. Libw83627.so
The dynmic library of the GPIO, Watchdog, and LAN Bypass APIs for accessing the
SuperIO.
4.3.
API List and Descriptions
4.3.1. GPIO
Syntax:
Get_gpi_status(int pin)
Description:
Get the status of GPIO input pins.
Parameters:
This function takes an Integer variable as the parameter.
The pin0 ~ pin3 is the status of the input pins.
Return Value:
1: HIGH, 0: LOW.
Syntax:
Get_gpo_status(int pin)
Description:
Get the status of GPIO output pins.
Parameters:
This function takes an integer variable as the parameter.
The pin0 ~ pin3 is the status of the output pins.
Return Value:
1: HIGH, 0: LOW.
Syntax:
Set_gpo(int pin, int value)
Description:
Set the status of GPIO Output value.
Parameters:
Set value 0 is Low, 1 is High
Return Value:
If the function sets the values successfully, it returns 0 or
-1, any other returned value stands for error.
4.3.2. Watchdog
26
Syntax:
Void wdt_start(int _timevalue)
Description:
This function reads the value of the watchdog time
counter.
Parameters:
The parameter ‘_timevalue’ is the value to set to watchdog
timer register. The range is 1 ~ 255.
Return Value:
None.
Syntax:
Int get_wdt_count(void)
Description:
This function get the watchdog timer register.
Parameters:
None.
Return Value:
This function returns the value of the time counter.
Acrosser Technology Co., Ltd.
AND-G420N1 User Manual
Syntax:
Void wdt_stop(void)
Description:
This function sets the watchdog timer stop
Parameters:
None.
Return Value:
None.
4.3.3. LAN Bypass
Syntax:
void enableWtd(void)
Description:
Enable Watchdog Timer. (This timer is different from the
System Watchdog timer).
Parameters:
None.
Return Value:
None.
Syntax:
void disableWtd(void)
Description:
Disable Watchdog Timer.
Parameters:
None.
Return Value:
None.
Syntax:
void reloadWtd(void)
Description:
Reload Watchdog Timer.
Parameters:
None.
Return Value:
None.
Syntax:
void forceNormal(void)
Description:
Force the port to become normal state.
Parameters:
None.
Return Value:
None.
Syntax:
void forceBypass(void)
Description:
Force the port to become bypass state.
Parameters:
None.
Return Value:
None.
Syntax:
void setWtd4(void)
Description:
Set the watchdog timer to 4 seconds.
Parameters:
None.
Return Value:
None.
www.acrosser.com
27
AND-G420N1 User Manual
28
Syntax:
void setWtd8(void)
Description:
Set the watchdog timer to 8 seconds.
Parameters:
None.
Return Value:
None.
Syntax:
void setWtd16(void)
Description:
Set the watchdog timer to 16 seconds.
Parameters:
None.
Return Value:
None.
Syntax:
void setWdt32(void)
Description:
Set the watchdog timer to 32 seconds.
Parameters:
None.
Return Value:
None.
Acrosser Technology Co., Ltd.
AND-G420N1 User Manual
5.
FAQ
Q 1. Where can I find the serial number of this product?
• The serial number (S/N) is a label printed with alpha-numeric character. You can
find the S/N label on the bottom of this product or on its packing box.
Q 2. What if the Fedora 20 Workstation cannot be installed normally?
• Please follow these steps to install Fedora 20 Workstation.
1. Get ready with the files Fedora 21 32/64 server iso and Fedora 20 32/64
DVD iso.
2. Install liveusb-creator tool.
a. To install under Ubuntu OS, you may refer to the description detailed
on https://ifireball.wordpress.com/2011/10/14/running-fedoras-liveusbcreator-on-ubuntu/
b. To install under Fedora OS, you may use the yum install liveusb-creator.
3. Create a bootable USB stick in "ext3" format.
4. Run the liveusb-creator, exract the Fedora 21 32/64 server iso into the
USB stick.
5. Copy the Fedora 20 32/64 dvd iso into the USB stick.
6. Start installing Fedora 20.
Step 1:
Boot up the system with the bootable USB stick.
*******************************************************************
*
Fedora-Server 21
*
*******************************************************************
*
*
*
*
* InstallFedora-Server 21
*
* Test this media & install Fedora-Server 21
*
*
*
* Troubleshooting
*
*
*
*
*
*
*
*
Press Tab for full configuration options on menu items.
*
*
*
*******************************************************************
www.acrosser.com
29
AND-G420N1 User Manual
Step 2:
Press Tab key. Add a string linux text console=ttyS0,115200
behind quiet.
*******************************************************************
*
Fedora-Server 21
*
*******************************************************************
*
*
*
*
* InstallFedora-Server 21
*
* Test this media & install Fedora-Server 21
*
*
*
* Troubleshooting
*
*
*
*
*
*
*
*
*
> vmlinuz initrd=initrd.img inst.stage2=hd:LABEL=LIVE quiet linux text console=
ttyS0,115200
Step 3:
Select 2) Use text mode.
Starting installer, one moment...
anaconda 21.48.21-1 for Fedora-Server 21 started.
* installation log files are stored in /tmp during the installation
* shell is available on TTY2
* when reporting a bug add logs from /tmp as separate text/plain attachments
================================================================================
================================================================================
VNC
Text mode provides a limited set of installation options. It does not offer cust
om partitioning for full control over the disk layout. Would you like to use VNC
mode instead?
1) Start VNC
2) Use text mode
Please make your choice from above [’q’ to quit | ‘c’ to continue |
‘r’ to refresh]: 2
Step 4:
Select Item 3 Installation source.
================================================================================
================================================================================
Installation
1) [ ] Language settings
2) [!]
(English (United States))
3) [!] Installation source
4) [!]
(Processing...)
5) [!] Installation Destination
6) [x]
(No disks selected)
7) [!] Root password
8) [!]
(Password is not set.)
Please make your choice from above [’q’ to quit
‘r’ to refresh]: 3
30
Timezone settings
(Timezone is not set.)
Software selection
(Processing...)
Network configuration
(Wired (enp3so0) connected)
User creation
(No user will be created)
| ‘b’ to begin installation |
Acrosser Technology Co., Ltd.
AND-G420N1 User Manual
Step 5:
Select Item 2 local ISO file.
================================================================================
================================================================================
Installation source
Choose an installation source type:
1) CD/DVD
2) local ISO file
3) Network
Please make your choice from above [’q’ to quit | ‘c’ to continue |
‘r’ to refresh]: 2
Step 6:
Select Item 1 USB flash drive.
================================================================================
================================================================================
Select device containing the ISO file
1) USB 3.0 FLASH DRIVE /dev/sdb1 (14.44 GiB MB) ext3 LIVE
2) ATA ST320LT012-9WS14 /dev/sda1 (500 MiB MB) ext4 ffd4b141-1102-4a3f-b136a5a27194a69d
3) ATA ST320LT012-9WS14 /dev/sda3 (50 GiB MB) ext4 987962af-61af-4740-aa22-3
cd86f4858b5
4) ATA ST320LT012-9WS14 /dev/sda5 (244.1 GiB MB) ext4 7c9e5844-03c7-4d53-aac
8-9eb1a0efe9d5
Please make your choice from above [’q’ to quit | ‘c’ to continue |
‘r’ to refresh]: 1
Step 7:
Select Item 1 Fedora-20-i386-DVD.iso.
================================================================================
================================================================================
Select an ISO to use as install source
1) Fedora-20-i386-DVD.iso
Please make your choice from above [’q’ to quit | ‘c’ to continue |
‘r’ to refresh]: 1
Step 8:
Select Item 2 Timezone settings.
================================================================================
================================================================================
Installation
1) [ ] Language settings
2) [!]
(English (United States))
3) [!] Installation source
4) [!]
(Processing...)
5) [!] Installation Destination
6) [x]
(No disks selected)
7) [!] Root password
8) [!]
(Password is not set.)
Please make your choice from above [’q’ to quit
‘r’ to refresh]: 2
www.acrosser.com
Timezone settings
(Timezone is not set.)
Software selection
(Processing...)
Network configuration
(Wired (enp3so0) connected)
User creation
(No user will be created)
| ‘b’ to begin installation |
31
AND-G420N1 User Manual
Step 9:
Select the timezone of your region.
================================================================================
================================================================================
Timezone setting
Available regions
1) Africa
6) Atlantic
2) America
7) Aystralia
3) Antarcatica
8) Europe
4) Artic
9) Indian
5) Asia
Please select the timezone.
Use numbers or type names directly [b to region list,
10) Pacific
11) US
12) Etc
q to quit]: 5
Step 10: Select the city your region.
1)
2)
3)
4)
5)
6)
7)
Aden
Almaty
Amman
Anadyr
Aqatau
Aqtobe
Ashgabat
28)
29)
30)
31)
32)
33)
34)
Irkutsk
Jakarta
Jayapura
Jerusalem
Kabul
Kamchatka
Karachi
54)
55)
56)
57)
58)
59)
60)
Pyongyang
Qatar
Qyzylorda
Rangoon
Riyadh
Sakhalin
Samarakand
25) Ho_Chi_Minh
52) Phnom_Penh
78) Yerevan
26) Hong_Kong
53) Pontianak
27) Hovd
Please select the timezone.
Use numbers or type names directly [b to region list, q to quit]: 65
Step 11: Select Item 4 Software selection.
================================================================================
================================================================================
Installation
1) [ ] Language settings
2) [x]
(English (United States))
3) [x] Installation source
4) [!]
(Fedora-20-i386-DVD.iso)
5) [!] Installation Destination
6) [x]
(No disks selected)
7) [!] Root password
8) [!]
(Password is not set.)
Please make your choice from above [’q’ to quit
‘r’ to refresh]: 4
Timezone settings
(Asia/Taipei timezone)
Software selection
(GNOME Desktop)
Network configuration
(Wired (enp3so0) connected)
User creation
(No user will be created)
| ‘b’ to begin installation |
Step 12: Select Item 8 Development and Creative workstation.
================================================================================
================================================================================
Base environment
Software selection
Base environment
1) [ ] GNOME Desktop
2) [ ] KDE Plasma Workspaces
3) [ ] Xfce Desktop
4) [ ] LXDE Desktop
5) [ ] Cinnamon Desktop
6) [ ] MATE Desktop
7) [ ] Sugar Desktop Environment
Please make your choice from above [’q’
‘r’ to refresh]: 8
32
8) [x] Development and Creative Work
station
9) [ ] Web Server
10) [ ] Infrastructure Server
11) [ ] Basic Desktop
12) [ ] Minimal Install
to quit | ‘c’ to continue |
Acrosser Technology Co., Ltd.
AND-G420N1 User Manual
Step 13: Select the rest of the items, press b to begin installation.
================================================================================
================================================================================
Installation
1) [ ] Language settings
2) [x]
(English (United States))
3) [x] Installation source
4) [x]
(Fedora-20-i386-DVD.iso)
5) [x] Installation Destination
(Automatic partitioning selecte
6) [x]
d)
7) [x] Root password
8) [x]
(Password is not set.)
Please make your choice from above [’q’ to quit
‘r’ to refresh]: b
www.acrosser.com
Timezone settings
(Asia/Taipei timezone)
Software selection
(Development and CReative Works
tation)
Network configuration
(Wired (enp3so0) connected)
User creation
(User test will be created)
| ‘b’ to begin installation |
33
AND-G420N1 User Manual
Technical Support Form
We deeply appreciate your purchase of Acrosser products. Please find the “tech_form.
doc” file in our utility CD. If you have any questions or problems about Acrosser products,
please fill in the following information. We will answer your questions in the shortest time
possible.
Describe Your Info and Acrosser System Info
• Your Company Name: • Your Contact Info: Phone Number: • Your E-Mail Address: • Your Company Address: • Acrosser Model Name: • Acrosser Serial Number: Describe System Configuration
• CPU Type: • Memory Size: • Storage Device (e.g. HDD, CF, or SSD): • Additional Peripherals (e.g. Graphic Card): • Operating System & Version (e.g. Windows 7 Embedded): • Special API or Driver: (If yes, please provide it for debug.)
• Running Applications: • Others: Describe Your Problems or Questions:
Send the above information to one of the following Acrosser contacts:
•
•
•
•
Acrosser Local Sales Representative
Acrosser Authorized Sales Channels
Acrosser Inquiry --- http://www.acrosser.com/inquiry.html
Acrosser FAX Number --- 886-2-29992887
www.acrosser.com
34
Acrosser Headquarters
241新北市三重區光復路一段61巷26號10樓
10F., No.26, Ln. 61, Sec. 1, Guangfu Rd.,
Sanchong Dist., New Taipei City 241, Taiwan,
R.O.C.
TEL: +886-2-29999000
FAX: +886-2-29992887
Acrosser Taichung Office
408台中市南屯區河南路四段162號12樓之6
12F.-6, No.162, Sec. 4, Henan Rd., Nantun Dist.,
Taichung City 408, Taiwan, R.O.C.
TEL: +886-4-22510659
FAX: +886-4-22546079
Acrosser China Subsidiary
深圳市欣扬通电子有限公司
深圳市福田区车公庙泰然九路21号
皇冠科技园3栋2楼 (邮编: 518040)
2F., 3rd Building, Crown Science Park, No. 21,
Tai-Ran 9th Rd., Che Gong Miao, Futian Dist.,
Shenzhen, China (Postal:518040)
TEL: +86-755-83542210
FAX :+86-755-83700087
Acrosser Shanghai Office
欣扬通电子有限公司 上海分公司
上海市徐汇区零陵路631号爱乐大厦12E (邮编:
200085)
12E, Aile Building, No.631, Ling-ling Road,
Xu-Hui Dist., Shanghai, China (Postal:200085)
TEL: +86-21-64288853
FAX: +86-21-64288854
Acrosser Beijing Office
欣扬通电子有限公司 北京分公司
北京市海淀区安宁庄西三条9号
宜品上层2-703 (邮编: 100085)
Room 2-703, Yipinshangceng, No.9, Xisantiao,
Anning Zhuang, Haidian Dist., Beijing, China
(Postal:100085)
TEL: +86-10-82359009
FAX: +86-10-82359003
Acrosser USA Inc.
11235 Knott Ave. Suite A, Cypress, CA 90630, USA
Toll Free: +1-866-401-9463
TEL: +1-714-903-1760
FAX: +1-714-903-5629
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement