to down load a full owner`s manual for the ultra

to down load a full owner`s manual for the ultra
THE ULTRA® SERIES USER MANUAL
Instruction manual for Hybrid Ultra 7 Series Systems.
Advanced Ultra Water Manufacturing and Delivery Systems
I. INTRODUCTION -------------------------------------------------------------------------------------------------------1
II. SAFETY NOTES ------------------------------------------------------------------------------------------------1
III. PRECAUTIONS ------------------------------------------------------------------------------------------------1
IV. MAINTENANCE ------------------------------------------------------------------------------------------------ 2
V. HOW DOES YOUR WATER PRECIPITATOR WORK --------------------------------------------- 2
VI.
FEATURES OF WATER Precipitator --------------------------------------------------------------- 3
VII.
OPERATING YOUR WATER Precipitator------------------------------------------------------ 5
VIII. TROUBLE SHOOTING--------------------------------------------------------------------------------15
IX.
TECHNICAL SPECIFICATIONS--------------------------------------------------------------------19
X.
OPTIONAL DIGITAL TOUCH SCREEN CONTROL INSTRUCTIONS -------------------- 21
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
1
THE ULTRA® SERIES USER MANUAL
Ⅰ. INTRODUCTION
Thank you for purchasing the most technologically advanced, electronic Water
Precipitation Generator with an Ultra Pure Water delivery system, on the planet today. This
Water Precipitation Generator is the newest, state-of-the-art pure water-manufacturing
machine which uses some of the newest and most sophisticated electronic technology
available in the industry today. We have designed your Water Precipitation Generator to
produce the maximum amount of the healthiest - highest quality Ultra Pure drinking water
available with the only silver purified water on the planet, while using only a minimum
amount of electricity. With an external connection to city water as an added bonus, the
machine will serve as a Ultra water purifying POU dispenser with hot and cold water, and
will dehumidify, clean & air condition the air besides generate Ultra pure water from the air
you Breath, More pure than Dew ® The purest and healthiest water on the planet no
exceptions!.
Ⅱ. SAFETY NOTES
1. The power outlet should be equipped with reliable grounded protection.
2. Do not remove grounding terminal from the power cord.
3. Do not use extension plug nor extension adaptor.
4. Always keep the unit from poisonous gas and liquid.
5. Do not use damaged electrical plug or power cable.
6. Unplug power cord before maintenance.
7. Do not share the electrical outlet with other high power consumption appliance.
8. Always use correct replacement parts.
9. Do not unplug power cord with wet hands.
10. Use the enclosed water pipe kits to connect with city water
input. Do not use any old water pipelines to connect unit.
11. When moving the machine, please unplug the power cord and
empty water in all tanks. Do not tilt the machine more than 20º
during moving.
Ⅲ. PRECAUTIONS
1.
2.
3.
4.
5.
Do not place the unit too close to the wall. Best performance is
obtained when the unit is placed at least 20 cm. from the wall.
This unit is not intended for commercial or outdoor use.
Avoid prolonged exposure to direct sunlight on the digital display .
Keeps the unit working in standing position.
Operating voltage must not drop below 10% of standard power
supply. When the unit operates below this level, the unit becomes
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
2
THE ULTRA® SERIES USER MANUAL
noisy with the possibility of overheating. When this occurs, immediately switch the unit off
until the voltage returns to normal.
6.
Avoid prolonged direct eye exposure to ultraviolet device as it may damage the eye.
7.
Prevent children playing with HOT knob to avoid scalding.
8.
This unit is not suitable for use at places with spray water. Do not use spray water to clean
the unit.
9.
To prevent the machine from damage caused by freezing, please drain off the remaining
water and stop operating the machine if the environmental temperature during its operation is
below 0℃.
10. If there is any damage to the power cables, the cables must be repaired or replaced by an
authorized person to avoid danger.
11. For the condition of operating on uneven ground, a fixer should be mounted to the unit.
12. Do not place any object on top of the machine. Good ventilation is required to ensure
optimum performance.
IV. MAINTENANCE
ALways keep the unit clean. Wipe the outer casing with soft, damp fabric to clean. Use water to
clean; avoid using harsh cleaning agent.
1.
Do not use cleaning agent to clean storage tanks.
2.
Clean air filters regularly to ensure proper air flow.
Always drain out the remaining water from the tanks before a period of long inactivity
Around the kitchen It is important to be aware that your Water Precipitation Generator is a
humidity and temperature driven system. This means the machine totally depends on the level of
humidity in the air and the temperature to produce water. Ideally, the humidity level should be at
least 23% or above to achieve the machine’s optimum performance levels. In places with lower
humidity levels to 15%, the machine will still produce water not as much nor as quickly but will still
fill the tanks as in places with high levels of humidity. In the household or office environments, the
higher level of humidity tends to be area, near an open window or in rooms that are more spacious.
But it is recommended to close all air-conditioning vents in an air-conditioned room, or close the
heating vents and to open the window to ventilate the room to keep the humidity higher.(as air
conditioning steals 45% of the humidity as does electrical and gas heating systems (gas much as
60%) in the winter. Because your Water Precipitation Generator works converting (condensing) the
humidity in the ambient air to “ULTRA” pure drinking water, this unit also Cleans the air with a 5
part air filtration system, patented micro-partial and electrokinetic’s to give your home the cleanest
air for health and wellness that is needed. The Professor’s water generation systems act as a
complete very effective (almost perfect) dehumidifier in areas with high humidity. It not only acts
as a great water generator, but also a perfect dehumidifier to keep your family and office workers
breathing pure and healthy Air and Water more Pure than Dew®. 110% Guaranteed AquaDew®,
UltraDew® coming soon to stores near you. and ensure your new home appliance has a very long
service life.To ensure highest quality drinking water, our Water Precipitation Generators utilize
multiple filtration and sterilization technologies, 15 stages OF PATENTED FILTRATION that is UL
Listed, including 3 complete UV Sterilizer systems with patented continual reflux sterilization.
When the air is dry or during cold season, water generation will be slow. At this moment,
connection to city water as a POU. R. O. pure water delivery system and will make the machine
serve as a perfect water purifier by utilization of the filtration and sterilization system, 3 UV
purification systems with options of SilverSterilizer. Aqua Dew filters and UltraDew water.
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
3
THE ULTRA® SERIES USER MANUAL
VI. FEATURES OF YOUR NEW WATER PRECIPITATOR.
a. Advanced Micro-computer controlled:
The unit is fitted with an advanced micro-computer which ensures proper working of
internal parts, to regulate hot or cool water temperature setting, supervise and control
the functionality of individual parts inside the unit.
b. Electronic Sensors:
Various electronic sensors are attached to parts such as the UV lights, heating
mechanism and storage tanks. These sensors ensure that all parts are working
properly and warn you should a breakdown or performance irregularities occur in the
machine. The most advanced system on the planet
c. Energy Saving Features: To conserve electricity, electronic sensors have been placed in
the storage tank to automatically stop the machine from making more water when the tank
is full and hot/cold water reaches the preset data.
d. Child-proof Hot Water Lock out:
The function of hot water lock-out is to prevent children from scalding themselves
upon touching the water tap.
e. Ventura Fan: Newly-designed Ventura-type fan increases production efficiency and
greatly reduces the noise during operation.
f. Water Leakage Detector:
In case of any unexpected situation of water leakage, the machine can stop working
automatically accompanied with a warning sound and flashing VFD .
g. De-vaporization condensers :
These condensers are advanced designed specially with FDA food-grade coating to
prevent any metal contamination and improve the water production and taste
efficiency.
h. Advanced Electro kinetic Air Filtration system:
The first filter that air passes through before being condensed and converted to water
is our Advanced Electro kinetic patented and UL listed Air Filtration system effectively
prevents micro particles, pollen and dust from entering the machine, as well as
preventing virus, bacteria, slime, fungus growth and VOC Contaminates
i. Ultraviolet Filtering treatment systems:
The proprietary ultraviolet lamp treats the water for sterilization to ensure that all
bacteria and micro-organisms are eliminated. The reflux sterilization process is
controlled by a digital micro-computer automatically by 3 (three) ultraviolet lamp
systems.
j. Multi-Stage Filtration System:
Our dedication to providing the highest-quality, greatest tasting water our world
consumers is accomplished by our unique 15 multi facetted stages of filtration and
sanitization systems.
1. LF2 Carbon Filter or Nanometer Molecular Sieve: Removes ammonia, chlorine
residuals, organic compounds, soil particles, dirt, dander, pollen etc.
2. Sediment filter: Removes micro particles to protect water pump.
3. Pre-Carbon Filter I :Removes organic compounds, free chlorine, heavy metal, etc.
4. Pre-Carbon Filter II :Removes organic compounds, free chlorine, heavy metal, etc.
5. Reverse Osmosis Membrane: Removes dangerous bacteria, virus, mineral salt, heavy
metal, organic compounds, etc.
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
4
THE ULTRA® SERIES USER MANUAL
5. Post-Carbon Silver Sterilizer: Removes volatile organic compounds and improve water
taste and smell and adds an extended shelf life to the water by adding ionic silver by
killing all bacteria and viral possibilities.
6. 1.Top Tank UV Sterilization Lamp eliminates 99.9 all bacteria levels in the top tank.
7. 2.Bottom Tank UV Sterilization Lamp eliminates 99.9 all bacteria levels in Bottom tank.
8. 3.Water Output UV Sterilization Lamp eliminates 99.9 % of all bacteria levels ensuring
the cleanest, safest and the purest water in all unit dispensed water.
k. Water Recirculation:
Our patented exclusive technology ensures that stored water remains fresh, pure and
clean and avoids second-hand viral contamination and is kept sanitized.
l. Overheat Protector:
Overheat protector offers further protection for your machine. In case of overheating in
the water heater during the heating process, this protection will automatically shut off
the heater unit.
m. An advanced and ultramodern very Regal Body style and many colors available:
This Water Precipitation Generator has a Very Stable base and will not tip over as with all the
other sleeker designs of other Generators on the market today. The unit is the top water
producing unit on the market in 2010 and the most versatile. An advanced VFD display is added
to make the operation of the unit’s operating functions easy to follow, including air, humidity,
water temperature and all operating systems in the unit and water quality and filter conditions.
N. WARRANTY INFORMATION
Your new ULTRA SERIES Water generation systems have a one–year warranty, and 2-years on
the compressor against manufacturing defects. And a lifetime limited warranty on the water
generator itself, Labor, shipping is not included. To be eligible for the warranty coverage, your
must fill out a warranty card. If you have not, please contact your local Consortium member to
do so within 30 days or your warranty may not be valid and has an expiration of 30 day from the
date of purchase. .
.
VII. OPERATING YOUR NEW ULTRA WATER PRECIPITATOR
By following these simple instructions and simple maintenance procedures, your
Water Generator should give you years of trouble-free operation while producing the
maximum amount of pure, high-quality, drinking water that is beneficial to your health.
Please read this operation manual carefully before you start your new water generation
machine. By reading and following this simple manual, you will familiarize yourself
with your new water generator and all its functions, ensuring yourself of a machine,
which constantly operates at its optimum level.
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
5
THE ULTRA® SERIES USER MANUAL
ULTRA 7 CONTROL SCREEN OPTIONS: INCLUDE DIGITAL TOUCH SCREEN CONTROLS
VFD SCREEN DISPLAY
POWER:POWER SWITCH
HUMIDISTAT CONTROL
:
HOT
WATER
OUTPUT
FILTRATION SYSTEM RESET
HOT:HEATING ON / OFF
:COLD WATER OUTPUT
COOL:COOLING ON / OFF
CELCIUS / FAHRENHEIT SHIFT
BRAKING LEVERS
Please Note: All our new Ultra Water precipitation generators can automatically fill any sized
external water holding tank.
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
6
THE ULTRA® SERIES USER MANUAL
a. VFD INDICATORS OR WITH DIGITAL TOUCH SCREEN CONTROLS - ULTRA 7 D.T.S.
1
2
3
4
5
12
6
7
13
14
15
16
17
8
b. SETTING UP your New Water Generator.
9
1.Hot Water Indication:
10
11
10.Booster Pump Icon:
When hot water lock is unlocked, this logo will The Pump is working when the icon flashes
flash.
11.Water Level Indication of Bottom Tank:
2.Heating Icon:
Higher the level displays, more water is contained.
Heating function is started when the icon
12.Water Generating Icon:
remains on; the unit is in heating process when
The unit is generating water when the icon flashes.
the icon flashes.
3.Cool Water Indicator:
4.Cooling Icon:
13.Humidity:
Display of the current humidity.
14.Warning Icon:
Cooling function is started when the icon
remains on; the unit is in cooling process when Normal when the icon remains on; the icon will
flash when water leakage is detected.
the icon flashes.
5.Hot Water Temperature:
15.Defrost Icon:
Press C/F key on the panel to switch water The unit is on defrosting process when the icon
temperature display between Centigrade and flashes (There can be frost because of low
Fahrenheit.
temperature in some areas).
6.Cool Water Temperature:
16.Water Recirculation Icon:
Press C/F key on the panel to switch water Water recycling is on when the icon flashes.
temperature display between Centigrade and
17.Filter Icon
Fahrenheit
Normal when the icon remains on. When flashes,
7.Top Tank UV Lamp Icon
the filter should be cleaned or replaced.
The U.V.’s are working correctly when the icon Please refer to the section on CLEANING,
remains on; If it blinks, UV is working STERILIZATION & REPLACEMENT for details.
abnormally.
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
7
THE ULTRA® SERIES USER MANUAL
8.Water Output U.V. Lamp Icon:
The U.V. is working well when the icon remains
on. If it blinks, U.V. is working abnormally.
9.Water Level indication of Top Tank
Higher the level displays, more water contains
1.
Please confirm parts in the package are a complete set. The unit should be placed on
solid and level ground, and be located in a place with good air circulation. The unit
should be placed no less than 20 cm. from the wall. Push down the lever of the braking
wheel to get the machine in fixed position.
2. DO NOT connect the unit to power within the first hour after your shipment arrives;
let the machine remain in a standing position to make sure the refrigerant returns to the
compressor. Upon arrival, instantly plugging the unit to power will damage the
compressor, and void the warranty
3.
Plug into a grounded electrical outlet with no more than a 15 Amp breaker or fuse, and
no less the 10 Amp breaker or fuse
4.
For the first operation, it is recommended to fill city water into the bottom tank until
the top tank water level on the screen indicates 3 levels. Then, drain one liter of water
each by pressing Cool and Hot buttons. Drain-off all remaining water from the back
HOT Water Drain outlet. This sets the filters and removes any particles from carbon
filters and is done every time a set of filters are replaced.
C. OPERATIONAL STAGE
1.
When the unit starts to operate, you should be able to hear a “beep.” The light on
the VFD should also be lit. The compressor will run in 2 minutes, and you will see that
the corresponding light on the VFD is lit. If the unit is required to be shut off, keep
pressing POWER button. Press POWER again to switch it on.
2.
Do not be alarmed when you do not obtain hot or cold water during the first few
days of operation. Only when the water level in the machine reaches a proper position
will the heating/cooling mechanism be triggered (Generally, the first heating/cooling
will start in ten to twenty hours during the first operation, depending on local
temperature and humidity conditions.).
3.
When there is enough water in your machine, you can press the “HOT” key on the
panel to switch on or off the heating process. The red “ ” indicator will be lit when
heating is switched on. It will turn off when the machine is not in the heating process.
The heating mechanism will be triggered on and the red “ ” indicator will blink when
the water level reaches preset condition. It will turn off automatically when water is hot
enough. During heating stage, press HOT button to switch off heating process.
4.
When there is enough water in your machine, press the “COOL” key on the panel to
switch on or off the cooling process. The green “ ” indicator light will be lit when
cooling is switched on. It will turn off when the machine is not on cooling process. The
cooling mechanism will be triggered and the green “ ” indicator will blink when the
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
8
THE ULTRA® SERIES USER MANUAL
water level reaches the preset condition. It will turn off automatically when water is
cool enough. During the cooling stage, press the COOL button to switch off the cooling
process.
5.
Press C/F button to switch the temperature display between Celsius and Fahrenheit.
6.
Generally, both heating and cooling can be turned on together. When the machine is
in heating and cooling process, the hot and cold water temperature will remain in the
preset range automatically. Keep pressing C/F button to have the Hot water
temperature display indicate the current setting. Then press the HOT or COOL button
to adjust the setting. Press HOT to raise the setting value; press COOL to lower the
value. Hot water adjustment range: 75℃~93℃. To adjust the cool water temperature
setting, press C/F again to have the Cool water temperature display indicate the
current setting. Then, press the HOT or COOL button to adjust the setting. Press HOT
to raise the setting value; press COOL to lower the value. Cool water adjustment range:
4℃~10℃.
7.
When the filtration system is ready for replacement, REPLACE on display will blink
to remind the user to clean or change filters (Please refer to Filter Replacement for
details). When cleaning or replacement is done, keep pressing RESET till REPLACE
indicator stops blinking. Press RESET again to turn off REPLACE indicator and to reset
the replacement warning time.
8.
9.
The system will enter defrosting status and the DEFROST indicator on the screen
will blink when the environmental temperature is too low. If it is required to check the
current defrosting temperature, keep pressing COOL to show defrost temperature F##
at the position of humidity level on the screen.
Press
button to dispense cool water. To dispense hot water, keep pressing
LOCK button till the HOT indicator blinks and makes a beeping sound; then press
button to get hot water.
10. not be alarmed when your machine turns off automatically. To conserve energy, your
machine has been fitted with an electronic sensor which automatically switches the
machine off when the storage tank is full. AND CAN NOW FILL AN EXTERNAL TANK full
11. When the air is dry, or during cold season, water generation will be slow. At this point,
external connection to city water will make the machine serve as a water purifier by
utilization of the filtration and sterilization system (Some parts are optional. Please contact
the local distributor for purchase). When switched on all is automatic
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
9
THE ULTRA® SERIES USER MANUAL
Filter Cup
PPF Filter
Water tubing
Input Valve
Tee-connector
City water input
Water tap
Optional parts
Connector
12. For the first operation, when the top tank is full of generated water, please follow the
steps in CLEANING, STERILIZATION & REPLACEMENT to eliminate the smell of new
machine.
d. CLEANING AND REPLACEMENT OF FILTERS
Recommended Timing for Filter Replacement will vary according to your water
consumption. (The timing below is based on 8 liters of water consumption per day):
1) EF2 Carbon Filter EF2-F002 or
(Two) Nanometer Molecular Sieves
24
6 To12
months or by unit filter light
months clean or replace
2) Pre-Carbon Filter 1 EF-F001
24
months or by unit filter light
3) Pre-Carbon Filter 3 EF-F003
24
months or by unit filter light
4) Reverse Osmosis Membrane RO-001
24 to 36
months or by unit filter light
5) Post-CarbonFilterEF-F004,WBSF-05
24
months or by unit filter light
NF-N001
6) UV bulbs (two)
EL-E005-UV
24 months or upon UV fault warning
lite
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
10
THE ULTRA® SERIES USER MANUAL
Note:
1. The above recommended service timing is for reference only.
2. After a long period of service 24 to 36 months, we recommend that you replace ALL the
filters to ensure that your unit will always produce the cleanest and purest drinking water
effectively.
Electronic Control
Center Panel
Air Exhaust
Pre-silver or Carbon
5 Stage Sterilizing Micro
Filter Ⅰ
Particle Air Filter System
Pre-Carbon Filter
Hot water drain
Ⅱ
Post-Carbon
Silver
or A
Ceramic Mineralizer
for perfect PH
Sterilizer™®
Reverse Osmosis
Drip tray collector
Bottom tank drain &
external tank filling
outlet .
City Water Input
Membrane
Bottom Tank
● The above structure and filtration system
is for reference only,
custom units differ also custom Sparkling Silver, Mineral or Soda water customizations also
available with a flip of a switch (No external tanks needed).
1. Cleaning:
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
11
THE ULTRA® SERIES USER MANUAL
1.1 Cleaning of Air Filter:
Please clean air filter regularly according to the air pollution situation in order to ensure
proper air supply. Take off air filter from the side as shown in picture 1.1-1,1.1-2,1.1-3.
Rinse in clean water to remove dirt and then replace.
water
1.1-1
1.1-2
1.2
1.1-3
1.2 Cleaning of the water collector:
Remove water collector from the back. Clean and return to original position.
1.3 Cleaning the bottom of the tank:
a. Keep pressing POWER to switch off the power as shown in Picture 1.3-1; unplug the
power cord;
b. Remove bottom tank(Picture 1.3-2);
c. Open tank cover(picture1.3-3); remove filter cup(picture1.3-4);
d. Remove filter net(A), filter bracket(B), and filter fiber(C). Rinse the cup filter with
clean water(D);(Picture 1.3-5);
e. Disconnect the pin of bottom water sensor(picutre1.3-6); pull out water outlet
tubing(picture 1.3-7);(Note: In case quick coupler is used for the connection,
please press the front retainer ring inward and pull out.);
f. Remove small outlet filter and rinse with clean water(picture 1.3-8). Check to ensure the
filter net is in good condition; otherwise, replace with new one. Wipe off the dirt on the
tank walls.
g. Put back in place all parts.
2
1
1.3-1
1.3-2
1.3-3
1.3-4
1.3-6
1.3-7
1.3-8
A
B
C
1.3-5
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
12
THE ULTRA® SERIES USER MANUAL
1.4 Cleaning of Front filtration system:
a. Keep pressing POWER to switch off power. Open front bottom cover(picture 1.4-1);
b. Pull out water outlet tubing from the outlet connector of 2nd stage filter;(picture 1.4-2)
c. Pull out water inlet tubing from the inlet connector of 3rd stage filter;(picture 1.4-3)
d. Connect the outlet of the 2nd stage filter to the inlet of the 3rd stage filter with the tubing;
(picture 1.4-4)
1.4-1
1.4-2
1.4-3
1.4-4
e. Pull out outlet tubing from the outlet of 3rd stage filter;(picture 1.4-5)
f. Connect the outlet of the 3rd stage filter to a water tank with tubing;(picture 1.4-6)
g. Pull out bottom tank(picture 1.4-7),remove filter cup(picture 1.4-8),and rinse the filter
cup with clean water. Replace the cup. Fill the bottom tank with city water;
h. Switch on power and start cleaning the filtration system. Keep checking the water level of
the bottom tank and fill with water until clean water comes out;
2
1
1.4-5
1.4-6
1.4-7
1.4-8
i. Replace all the parts to original positions(picture 1.4-9) making sure all connections are
tight to prevent leakage;
j. Disconnect the tubing from the RO inlet(picture 1.4-10);
k. Remove RO cover(picture 1.4-11);
l. Insert RO membrane into the cartridge(picture 1.4-12). Pay attention to the inserted
directions.
2
1
1.4-9
1.4-10
1.4-11
1.4-12
m. Press the membrane to the end(picture 1.4-13);
n. Replace the cover and tubing(picture 1.4-14);
o. Replace the front panel(picture 1.4-15). Switch on the unit and start cleaning the RO
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
13
THE ULTRA® SERIES USER MANUAL
membrane by automatic running or by filling city water into the bottom tank until the top
tank is full of water;
p. Press “ ” and keep pressing HOT to unlock and press “ ” to release 2 L of hot and cold
water each from faucet. Turn off the unit and drain all remaining water from the hot water
drain outlet at the back(picture 1.4-16);
1.4-13
1.4-14
1.4-15
1.4-16
2. Sterilization:
The brand new machine may be sterilized after one week of service at your option.
2.1 Prepare sterilization solution:Prepare 10 liters of sterilization solution (special solution
for water dispenser). Recommended to use hydrogen peroxide solution;
2.2 Keep pressing POWER to shut down the unit (picture 2.1); open top cover(picture
2.2open top tank cover(picture 2.3),fill the solution into the top tank(picture 2.4);replace the
top tank cover and make sure it’s tight. Replace back top cover;
2.3 Turn on the unit. Press “ ” and keep pressing HOT to unlock and press “ ” to release
1 L of solution each from faucet(picture 2.5). Shut down the unit. Drain off about 0.5L of the
remaining solution from the hot water drain outlet at the back. Keep the remaining solution
soaking in the top tank for more than 2 hours (or as per instruction of the solution);
2.4 Run the unit. Press “ ” and keep pressing HOT to unlock and press “ ” to release 2 L of
solution each from faucet. Shut down the unit. Drain all the remaining solution from the hot
water drain outlet at the back.
2.5 Fill city water into the bottom tank. Turn on the unit and have it running automatically until
the top tank is full of water.
2.6 Keep pressing HOT to unlock and press “ ” to release 2 L of water each from the faucet.
Shut down the unit. Drain off all remaining water from the hot water drain outlet at the back
(picture 2.6);
2.7 Repeat the above steps in 2.5 and 2.6 in order to clean the remaining solution from the top
tank. It is suggested to perform the same operation twice.
2.1
2.2
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
2.3
14
THE ULTRA® SERIES USER MANUAL
2.4
2.5
2.6
3. Replacement:
3.1 Replacing a filter:
a. Keep pressing POWER to shut down the unit(picture 3.1-1);remove the front panel with
both hands from the bottom(picture 3.1-2);
b. Replace the carbon filter by pulling out tubing at both ends(picture 3.1-3, 3.1-4);
c. Replace RO membrane by pulling out tubing, removing cartridge cover, removing the
membrane and replacing with new one(picture 3.1-5, 3.1-6, 3.1-7, 3.1-8);
d. Replace front panel.
3.1-1
3.1-2
3.1-3
3.1-4
3.1-7
3.1-8
2
1
3.1-5
3.1-6
Note: 1. We recommend you replace each filter one by one in order.
2. When replacement is done, please clean the filtration system as per FILTRATION
CLEANING.
3.2 Replace the top U.V.:
a. Switch off the unit and unplug power cable from the electrical outlet before replacement
(Picture 3.2-1);
b. Open top cover (picture 3.2-2);
c. Remove screws on top end (picture 3.2-3);
e. Disconnect U.V. connection pin (picture 3.2-4) and pull out U.V. bulb (picture 3.2-5);
f. Replace with new bulb and replace top cover (picture 3.2-6);
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
15
THE ULTRA® SERIES USER MANUAL
3.2-1
3.2-2
3.2-3
3.2-4
3.2-5
3.2-6
3.3. Replace the cool water out U.V.:
a. Switch off the unit and unplug the power cable from the socket before replacing (picture
3.3-1);
b. Open top cover (picture 3.3-2);
c. Remove foam cup of U.V. (picture 3.3-3);
d. Remove black insulation cover (picture 3.3-4);
e. Disconnect UV electrical connection pin (picture 3.3-5). Pull out U.V. bulb (picture 3.3-6).
Replace with new bulb and replace all parts.
3.3-1
3.3-2
3.3-3
3.3-4
3.3-5
3.3-6
4. Attention:. It is recommended to dispense not less than 3 liters of water every day.
4.2. If hot water is not dispensed for a long period, it is recommended to turn on the
heating process for more than 30 minutes once a week. Keep pressing the HOT button
to unlock and press “ ” to release 500 ml of hot water from faucet.
4.3. If the machine was not in use for 2 to 5 days, please drain out 500ml of cool water
before dispensing for drinking use. If the machine is to be inactive for more than 5 days,
it is recommended to drain water in all tanks and switch off the machine in advance.
For reactivation, please run the system to produce about 5 liters of water, and drain off
from the back drain outlets.
4.4. If the machine was not in use for more than 7 days or it has been in continuous
operation for more than 4 months, please follow the steps in CLEANING,
STERILIZATION & REPLACEMENT to sterilize the system.
4.5. Switch off the power first before draining water from the back outlets.
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
16
THE ULTRA® SERIES USER MANUAL
VIII. TROUBLE SHOOTING
Problem: The U.V. WARNING light
blinks with three short beeps.
Solution: Check the ultraviolet device in the top tank to make sure the bulb is on and all
wirings are correct. If the U.V. is not working, replace with new bulb by following the steps
in CLEANING, STERILIZATION & REPLACEMENT.
Problem: The whole U.V. WARNING logo
blinks and makes three short beeps.
Solution: Check the ultraviolet device at the cool water output to make sure the bulb is
on and all wirings are correct. If the U.V. is not working, replace with new bulb by following
the steps in CLEANING, STERILIZATION & REPLACEMENT.
Problem: The machine does not work even after the power cord is plugged in.
Solution: Check for proper power voltage and ensure that it is in the correct range for
operation. Make sure that the connection to the wall outlet is tight, secure & grounded.
Problem: the indicator
“REPLACE” on VFD display is blinking with beeping.
Solution: After a long period of operation, the filter might be overly dirty and needs to be
replaced. Replace with a new filter by following the steps in CLEANING, STERILIZATION &
REPLACEMENT. Reset the filtration warning time by following the 7th step in the section
OPERATIONAL STAGE.
Problem: LEAKS The system detected water leakage on base. The red logo
on the screen
blinks and the system cannot produce water the system may power down or shut off.
Solutions: Keep pressing the POWER button and unplug the power cord.
•
Check that all the tubing on the filtration system. All fittings are 2 wrench tight and tubing
is quick connect push in secure fittings.
•
Check that the tubing to the bottom tank is tight and secure.
•
Check that the drain tubing at the back is tight and secure.
•
Check that the water collector is in the correct position.
Problem: Remaining water cannot be drained from the back outlets when cleaning top
tank and hot water tank.
Solutions: Check water stopper inside the water drain outlet and be sure it is removed.
Problem: There is a burning smell from the machine and meanwhile the hot temperature
indicator has exceeded the preset.
Solutions: Keep pressing the POWER button and immediately unplug the power cord.
•
Stop draining immediately if you are on the draining operation from the back. Wait
to continue draining until hot water temperature is normal.
Problem: Water output from faucet is too small.
Solutions: Clean the filter net inside the water faucet or replace with new one,
•
Replace with new check valve inside water faucet.
Problem: No hot or cool water output but ambient water only.
Solutions: The heating function will be activated only when the top tank water level on the
screen is above two levels.
•
The cooling function will be activated only when the top tank water level on the
screen is above three levels.
Problem: The machine makes water at a slow rate even after a prolonged period of
operation.
Solutions: Make sure the temperature level is in the appropriate range;
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
17
THE ULTRA® SERIES USER MANUAL
•
Check the humidity level. A low humidity level results in less water production;
•
Make sure that the hot/cold water spouts are not blocked;
•
Make sure that the ingoing and outgoing air ventilation is not blocked;
•
Check that the distance between the machine and the wall is not too close;
•
Make sure that the power voltage is not too low or too high;
•
Make sure that the internal booster pump is working well;
•
Make sure that the water lines are not blocked and water flow is smooth;
•
Make sure that the unit is placed with good ventilation, and the air filter net is
cleaned regularly to ensure free air flow;
Problem: Humidity indicator on the screen is different from the real room humidity level.
• It is normal if the difference is in the range of 5% more or less.
• Make sure that the humidistat sensor is not blocked, covered or too close to the wall.
Problem: The machine is making excessive vibration or noise.
• Make sure there is no object placed on top of the machine.
• Make sure that there is no water cup placed on the water tray.
• Open the front bottom panel and check to be sure the copper tube on the inside of the
unit is not touching the side panel. Correct the position of the copper tube slightly and
slowly if it is.
Once all the above procedures have been performed and your machine still does not work or
does not work correctly, please do not try to perform any repair procedures yourself. Always
call a qualified service technician or your local Consortium member to look at the machine and
or perform the repair procedures. We are not responsible for any damages
incurred during self-reparation. This voids the warranty.
IX. TECHNICAL SPECIFICATIONS
a. Dimensions
Ultra7 series
Height
111 cm
Width
40.5 cm
Depth
54 cm
Net Weight
48.5 kg
b. Power supply max. 15 Amp input. GLOBAL power supplies and plugs available for International
use.
Voltages available
Power input
a.c. 220-240V
a.c. 220-240V
50Hz
60Hz
a.c. 120V
a.c. 120V
50Hz
60Hz
990W-1100W
970W
Heating Wattage
500-600W
500W
Operation Power
450-500W
430-460W
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
18
THE ULTRA® SERIES USER MANUAL
c. Water Production of over 10 gallons a day
Working Temperature
From 37 ° F. or 2.8 ° C.
101 ° F. or 38.3 ° C.
Working Humidity
From 22% TO 100% Relative Humidity, without an Evaporizer.
Water Storage Capacity
20 Liters all Stainless Steel Tanks & Tubes FULL
Cold Water Temperatures
2° C. or 35° F. ~ 9° C or 48° F.
UltraPure© ® Sanitized Water production at Sea Level Can produce over 10 gallons a day, with
optimized Environmental conditions (Barometric, Humidity and Temperature)
FILTER LIST FOR THE ULTRA SERIES WATER PRECIPITATORS
NO.
PICTURE
MODEL
PART NAME
U. PRICE
(USD)
EF-F001
REVERSE OSMOSIS
MEMBRANE
<[email protected]
<[email protected]$25.90
EF-F002
EF1 FILTER
<[email protected]$5.30
[email protected]$5.10
EF-F003
EF2 FILTER
<[email protected]$5.30
[email protected]$5.10
EF-F004
EF3 FILTER
<[email protected]$5.30
[email protected]$5.10
1.
2.
3.
4.
WB SF-5
5.
SILVER STERILIZER®
1 PC @ $9.95
25 - [email protected] $8.50
CARBON FILTER
FL-F0037-DOWN
CARBON FILTER ON
THE TOP OF THE
BOTTOM S.S.
HOLDING TANK
<[email protected]$7.20>
6.
FL-P022-AIR
AIR FILTER
FABRIC
<[email protected]$5.80
7.
NF-M001
2 NANOMETER
FILTRATION NET
(FAUCET)
<[email protected]$2.20
5.
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
19
THE ULTRA® SERIES USER MANUAL
EL-E005-UV
PHILIPS ULTRA
VIOLET LAMP
WB 4S
Air Filter
PATENTED MULTI
STAGE UL LISTED
<[email protected]$18.80
8.
9.
□ EL-UV04-001
<[email protected]$8.79
<[email protected]$16.59
PHILIPS ULTRAVIOLET
LAMP
(CONSISTING OF UV
LAMP, QUARTZ GLASS
TUBE AND SOCKET)
10
□ EL-UV11-001
<[email protected]$17.65
DIGITAL TOUCH SCREEN CONTROL PANEL INSTRUCTIONS
1.
Hot water dispensing indication: when “
Touching “
” icon, “
” icon flash, it means the tap is unlock; continue light
” water dropping icon motion flashing means hot water is dispensing.
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
20
THE ULTRA® SERIES USER MANUAL
2. Bottom tank water level indication: the arrow indicates water level , pointing at 1 means the tank is empty,
number increases as water level rises, 5 means the tank is full.
3. UV warning indicator: UV light is working well when icon keeps on. If it blinks, UV light is not functioning.
4. Water generating indicator: When “
” icon shows motion, the machine is generating water. When icon
lights on without motion, generating stops. If the icon blinks, it means the water generating function has been
shut off manually.
5. Booster bump icon indicator: The bump is working when the icon flashes.
6. Humidity indicator: Under normal operation, it indicates humidity level. During settings, it indicates
adjusting value.
7. Top tank water level indicator: the arrow indicates water level , pointing at 1 means the tank is empty, number
increases as water level rises, 5 means the tank is full. 8. Cold water dispensing indication: light
8. Touching on the “
” icon, “
” water dropping icon motion flashing means cold water is dispensing.
Cold water temperature indicator: indicate cold water temperature.
9. Cooling function indicator: When the icon light is on means cooling process allows; icon lights off means
cooling stops; flashing means cooling in process.
Leak warning icon: “ ” icon light off means normal, light on when leak is detected.
Filter indicator: when “
needed.
9. Recycle indication:
” icon light on means normal, flashing means need to replace filter or clean up is
“
” icon flashing means water is recycling.
10. Defrost icon: “DEFROST” icon flashing means the machine is defrosting.
11. Water heating icon: When icon light on means heating process allows; icon lights off means heating stops;
flashing means heating in process.
: when “
12. Top tank UV light indicator
” icon light on means top tank UV light function
normal, light off means UV light not working; Flashing means top tank UV not functioning normally.
: when“
b. Reflux UV light indicator
” icon light on means reflux UV light on means UV light
function normal, light off means UV light not working; Flashing means top tank UV not function normal.
: when “
c. Bottom tank UV light indicator
” icon light on means bottom tank UV light
function normal, light off means UV light not working; Flashing means bottom tank UV not functioning
normally.
17. Hot water temperature indicator: Indicating temperature value.
18. Cold water spout dispense icon
19. Hot water unlock indicator
: continuous light Touching the icon will dispense cold water.
: when hot water is needed, Touch unlock icon to unlock then keep Touching
unlock icon until hot water dispensing icon“
”
is flashing. Then Touch “
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
”to release hot water.
21
THE ULTRA® SERIES USER MANUAL
20. C/F conversion indicator
: To convert Centigrade or Fahrenheit value.
: enter function setting, choose function and make adjustments.
21. Adjustment icon
22. Touch mode icon
to select a function: select function needed to be adjusted.
a. H- ON / OFF : indicate present heating function on or off, Touch “
”to make desire adjustment.
C- ON / OFF: indicate present cooling function on or off, Touch “
”to make desire adjustment.
b.
”to make desired
c. W-ON / OFF:indicate present water generating function is on or off, Touch “
adjustment.
d. H-075 ~ 095:shows the present hot water temperature, soft Touch adjustment icon “
”to set desired
temperature, adjusting range between 75~95℃;
e. C-004 ~ 010:shows the present cold water temperature, soft Touch adjustment icon“
”to set desired
temperature, adjusting range between 4~10℃;
” to reset time.
f.
T-000:indicate filter system usage time period, soft Touch adjustment icon“
G.
RESET:soft Touch adjustment icon“
H.
FT 00:indicate the present water generating component temperature inside the machine.
23. Power control key
” to reset machine back to original factory setting.
: Normal operating condition and stand by condition function. When machine
operate normally, continuous soft touching the “Power” key, machine will switch to “stand by” condition.
During stand by condition, soft touch “Power” key and machine will switch back to normal operating
condition.
24. Hot water spout dispense icon
then Touch “
: continuous soft Touching the
icon until the “
” icon flashing ,
” to dispense hot water
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
22
THE ULTRA® SERIES USER MANUAL
Most Advanced Water Production Capacity on the Planet over 40 Liters a day with 87%
Relative Humidity with Water More pure than DEW®. Or a 7.0 PH mineralized or with
SilverSterilizer®, AquaDew®, UltraDew®, PurePH or UltraPH filtering systems.
The Most Technologically & Electronically Advanced Water Generators on the planet TODAY
called: Hybrid W. P. G. “Water Precipitation Generators” with 3 types of More Pure than Dew
Water® that is Guaranteed ! The Consortium of Global H20 (Water) Manufacturers PlanetWater
are Divisions and Projects of W.B.N. Inc.
THE WHITE BUFFALO NATION Inc.
SolarWorld Plaza
P.O. Box 211162
23
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
THE ULTRA® SERIES USER MANUAL
Crescent Valley, Nevada, 89821-1162 U.S.A.
Questions or Problems Call 001-775-468-0372 or your nearest Consortium member.
These units cost under $1100.00 + shipping and are delivered right to your door D.H.L.. In 15 days
or less guaranteed for samples only, after proof of Pay Pal, Bank Deposit. or Wire Transfer.
All Prices are Wholesale to the public per sample or by the container of 20Ft @ 103 units or 40 Ft
215 units add $59.00 per unit for shipping anywhere in the World with minimum order 25 units
THE MANY NEW PATENTS ON ALL OUR NEW ULTRA SERIES WATER GENERATORS
DO NOT INFRINGE ON ANY OTHER PATENTS INVOLVED IN ANY OTHER WATER
GENERATORS FROM ANY COMPANY ON THE PLANET. GUARANTEED
WBN Inc.© 2010
The Consortium of Global H20 (Water) Manufacturers, PlanetWater
Copyright © 2001-2010 The White Buffalo Nation Inc. All rights reserved. The Information,
Technology Statements, or the technology advancements contained in all WBN & Consortium
member web sites or Equipment may not be Copied, published, broadcast, rewritten, redistributed,
manufactured or used without the prior written authority of The White Buffalo Nations' Consortium of
Global H2O Manufacturers or Planet Water Copyright ©® 2010 WBN Inc. ® All rights are reserved.
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
24
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement