dgt60: maxi "goliah" weight indicatorrepeater
 DGT60: MAXI "GOLIAH" WEIGHT INDICATOR­REPEATER Weight indicator/ repeater with large matrix display composed of very intense bright LEDs. Particularly suitable for use outdoors, also in full sunlight, and where it's necessary to view from a distance at any angle. Case completely in IP68 stainless steel. CE­M approvable (OIML R­76 / EN 45501).
MAIN FEATURES
●
Functional 5­key waterproof keypad. ●
Large 6­digit display, 60 mm high, with very efficient SMD LEDs (software adjustment of the brightness intensity), DGT60 indicator / repeater. complete of 6 Leds for indication of active functions, visible from over 25 m, with viewing angle up to 120° and with power up to 750 mcd. ●
IP68 stainless steel case complete of wall fixing bracket. ●
Dimensions: 410 x 67 x 165 mm. ●
Calibration, Set­Up parameters, configurable from keyboard or from PC with DINI TOOLS. ●
Max. 10.000e or multirange 2 x 3000e @ 0,3 µV/d in CE­
M approved version for legal for trade use. ●
Max. 800.000d viewable with internal resolution up to 3.000.000 points. Dimensions in mm. ●
Up to 8 signal linearisation points with DINITOOLS. ●
A/D 24 bit sigma­delta 4­channel conversion, max.200 conv./sec. with automatic selection. DGT60BC / DGT60AN / DGT60PB FUNCTIONS
●
●
Ohm input resistance. THROUGH KEYBOARD: Zeroing; Semi automatic and presettable tare, print ●
independent weighing systems. SELECTABLE: High Resolution Weighing x 10; Net/Gross or lb/kg ●
Power supply from 12 to 24 Vdc with 110­240 Vac internal power supplier. conversion; Weighs totalisation; Formulation; Approved transmission of the weight to PC/PLC (with ALMEM Alibi Management of a weighing system with up to 4 cells with digital equalisation or management of up to 4 and/or data transmission; ON/Stand­by. ●
Connectable with up to 16 analogue load cells with 350 ●
Available as Scale (standard program) or as Repeater version (dedicated program). memory option); Counting; In/Out Truck weighing; Hold e Peak. ●
EXTERNAL INPUT: Simulation of key pressure; Keyboard lock. ●
MOSFET OUTPUT: I/O SECTION
●
printer, PC, or other external units. Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces ●
RS485 bidirectional port configurable for connection to PC, PLC, or other external units. (counting mode), with programmable enabling/disabling ●
RS232/C bidirectional port configurable for connection to thresholds, as direct check or upon weight stability. ●
PROFIBUS serial interface (DGT60PB model). SERIAL PORTS: ●
2 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions. On all models: Reading of the net, gross, and tare weights; Clearing; Semi automatic and presettable tare; ●
mA max, with configurable functions. Scale switch; Setting of outputs activation thresholds; Reading/Writing of Alibi Memory. 2 optoisolator photocouplers: 12÷24 Vdc, 5 mA min ­ 20 ●
16­bit analogue output (DGT60AN model) 4­20mA / 0­
DGT60BC and DGT60AN models: Reading of microvolts 5Vdc / 0­10Vdc at choice; maximum applicable voltage: or ADC converter for all the channels; Message display; 350 Ohm; minimum applicable voltage resistance: 10 Printing; Setting of APW in counting mode; Simulation of kohm. key pressure; MODBUS serial protocol. ●
THROUGH 16 bit ANALOGUE OUTPUT (DGT60AN): Analogue output proportional to the net or gross weight, either positive (in loading) or negative (in unloading). DGT60R REPEATER FUNCTIONS
●
Version with specific program for use of the indicator as a universal weight repeater or as a multi­scale repeater (MASTER) in combination with DFW/DGT/MCW. ●
FUNCTIONING MODES: ­ Multi­scale repeater (MASTER): function which allows to repeat up to 32 independent scales, with the possibility of managing their functions, or displaying and printing the sum of the weighs of all the scales. ­ UNIVERSAL weight repeater: function which allows to repeat the weight of any scales, through the configuration of the input string. OPTIONS ONLY AVAILABLE AT TIME OF ORDER
●
Option Box with thermal printer. ●
Ethernet interface. ●
External 868Mhz radio modem. ●
433MHz radiofrequency remote control. ●
Real time clock. ●
Alibi Memory. Indicatore / ripetitore di peso: Versioni disponibili
Code
Description
DGT60BC
Weight indicator/transmitter with IP68 stainless steel case, 5­key keypad, 60 mm LED display, and standard program (not including the repeater modes).
DGT60AN
Weight indicator/transmitter with IP68 stainless steel case, 5­key keypad, 60 mm LED display, 16 bit analogue output, and standard program (not including the repeater modes).
DGT60PB
Weight indicator/transmitter with IP68 stainless steel case, 5­key keypad, 60 mm LED display, PROFIBUS interface, and standard program (not including the repeater modes).
DGT60R
Weight repeater with IP68 stainless steel case, 5­key keypad, 60 mm LED display, dedicated program, and configurable protocol.
Indicatore / ripetitore di peso: Opzioni a richiesta solo in fase d'ordine
Code
Description
KCEM
Kit of plates and Welmec form for the approval of the system for legal for trade use, for each provided platform/weighing system, connected to Dini Argeo indicator.
VENT
Air valve for regulating the humidity and the pressure inside the indicator, advised for IP68 applications. OBTPRI60
Thermal printer for mounting attached to weight indicator, with stainless steel case, connection cable, internal power adapter for mounting inside the indicator. Combinable with DGT60 series indicator.
OBRF
External 868 MHz radio frequency module, ABS IP65 protecting box, 3 m cable, power supply from weight OBRFUSB
OBRF232
DFCLK
ALMEM
TLR
ETH
ETHCBRJ
LCCBC
LCCB5C
LCCB10C
RSCBPC
RSCB5
RSCB10
DCATEXMB4
TECSUP
indicator. Max. distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels.
868 MHz radio frequency module for PC, with PVC box and 1 m USB/mini USB connecting cable; power supply directly from the USB port. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels. (OBRFUSB must be combined with another radio module).
868 MHz radio frequency module for PC, ABS IP65 protecting box, 3 m RS232 connecting cable, complete with DB9 pin connector and external power supply. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels. (OBRF232 must be combined with another radio module).
Real time clock for printing/displaying of the date and time.
Alibi memory (fiscal memory, max 120.000 weighs) for approved transmission of the weight to PC/PLC. Real time clock integrated for print of the date/time.
433MHz radio frequency remote control, with 6 keys, for use up to 50 m of distance, in appropriate environmental conditions.
Integrated Ethernet interface with speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols.
Ethernet cable 1,5 m long, for connection between indicator and PC network. Made up of fairlead.
Shielded cable for platform, l= 50 cm + female connector to be soldered.
Shielded cable for platform, l= 50 cm + 5 m extension cable.
Shielded cable for platform, l= 50 cm cable + 10 m extension cable.
RS232/C cable l= 1,5 m, for the connection of the weight indicator to PC, made up of 9­pole female connector on PC side and wires for terminal connection on indicator side.
RS232 connection cable l= 5 m, for the connection of the weight indicator to a weight repeater, without connectors.
RS232/C cable l= 10 m, for the connection of the weight indicator to a weight repeater, without connectors.
Declaration of ATEX conformity of the whole, Ex II 2GD IIC T6 T125°C X system, with relative label of whole system, for NON ATEX weight indicator connected to MB4 Dini Argeo zener barriers, connected to mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). ATEX CONFORMITY DECLARATIONS will be supplied in English.
Technical assistance by telephone or at our premises for instrument configuration and printout formatting. NET HOURLY PRICE.
Indicatore / ripetitore di peso: Accessori
Code
Description
STFR
Stainless steel fixing bracket for mounting the weight indicator on wall, with adjustable inclination.
UKPLUG
Power adapter from Schuko to BS1363.
TECMAN
Printed technical manual (free, if downloaded from the web). NET PRICE.
UMAN
Printed user manual (free, if downloaded from the web and available in the CD, fitted with the product). NET PRICE.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement