How Straighten Twisted Pair Wire

How Straighten Twisted Pair Wire

EZ-RJ45 Connectors

How Straighten Twisted Pair Wire

1) Save the cable jacket and separate the four cable wires

2) Slide the cable jacket between the twisted pairs

3) Untwist the wire by pushing the wire in the opposite

direction of the twist.

4) When you reach the end, pinch the wire inside and pull

outward to straighten.

Slide wires thru the EZ-

RJ45 Connector

Arrange wires in the proper order

Twist the wires and slide the connector into the cable jacket for a tight fit.

Crimp & Finished!!

Wire Stripper

- Designed for stripping the

jacket on Cat 5, 5e cables.

- Will not nick inner conduct.

15015 $11.95

Twisted Pair Crimp Tools

Crimp Tool for EZ-RJ

- Tool steel die head assembly

provides 360° of connector

support during crimp.

100054C $86.95

The EZ-RJ45 Connectors, simplify twisted pair terminations by allowing the wire to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. It also guarantees that the wires will be properly flush to the front of the connector.

202003J

EZ-RJ45® Connectors, 100 Pc. Jar

202035J Strain Relief for EZ-RJ45 Cat 5e Connector. Jar of 100

$62.00

$24.00

202010J EZ-RJ45® Cat 6+ Connectors, 100 Pc. Jar $70.00

202036J Strain Relief EZ-RJ45 Cat6+ & Shielded Cat5e Connector, Jar of 100 $24.00

Modular Crimp Tool

TeleMaster™ Crimp Tool Kit

- Tool for RJ-11(1,2,3pair) & RJ-45 (4pair) plugs

- 10 4-Position, RJ-11 Stranded Modular Plugs

- 10 6-Position, RJ-11 Stranded Modular Plugs

- 10 8-Position, RJ-45 Stranded Modular Plugs

33-700

TeleMaster™ Crimp Tool Kit $54.45

Ratchet Telemaster

- Ratchet version of popular Telemaster™ Tool

for RJ-45 and RJ-11 modular plugs.

- Telephone tool cuts, strips, & crimps.

- Repeatable crimp action for high quality

connections

All-in-one crimping tool for

Western Electric (WE)/Stewart

Stamping (SS)-type, 6- and

8- position modular telephone plugs. Cuts & strips. Ratchet controlled to master the tension of the tool for ease of use.

- Embedded flat cable cutter and stripper.

- Crimps 8- position RJ45 connectors and 4- and 6- position

RJ11 and RJ12 connectors.

- Crimps AWG 28-24 telephone and data cables.

30-696

Ratchet Telemaster

$68.90

11212530

Modular Crimp Tool

$49.00

Telemaster Kits

33-750:

- Basic termination kit for 10Base-T

- Includes, UTP/Coax Stripper, Telemaster RJ-11/RJ-45 Tool, (50) 8-Position RJ-45 Non-Keyed Solid Plugs

33-704:

- Basic kit with multifunctional telephone tool to cut, strip, and crimp

- Kit includes, Telemaster™ for RJ-11/RJ-45 Plugs, (15) 4-Position, RJ-11 Stranded Modular Plugs, (15)

6-Position, RJ-11 Stranded Modular Plugs, (15) 8-Position, RJ-45 Stranded Modular Plugs

33-750

33-704

Economy 10Base-T Telemaster Kit

RJ-45, RJ-11 Telemaster™ Kit

$115.00

$78.00

Data/Video Kit

Kit includes professional tools to terminate both coax and twisted pair cables. VDV gives user the ability to test

terminated cables.

- Data/Video Kit

- Data T-Cutter

- 7-in-1 Screwdriver

- UTP Stripper

- Coax Stripper w/ replacement Cartridge

- Punchmaster II Punch Down Tool w/ 110 Blade

- 110/66 Blade combo punch down blade

- Crimpmaster Crimp Tool for RJ-45 Modular Plug

- OmniSeal XL Compression Tool

- Probe Pic and Spudger

- F/BNC Connector Insertion/Removal Tool

- VDV Multimedia Cable Tester

- Amplifier Probe

- Electrician’s Scissors w/ Stripping Notch

- Large Mouth Bag- 13 in.

33-917 Data & Video Kit $519.95

33-750 33-704

43

Major Credit Cards Accepted

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

Make your own HDMI cables

HDMI® (High-Definition Multimedia Interface) is a compact audio/video interface for transmitting uncompressed digital data. It is a digital alternative to consumer analog standards, such as radio frequency (RF) coaxial cable, composite video, S-Video, SCART, component video, D-Terminal, or VGA. HDMI® connects digital audio/video sources (such as set-top boxes, DVD players, HD DVD players, Blu-ray Disc players, AVCHD camcorders, personal computers (PCs), video game consoles and AV receivers to compatible digital audio devices, computer monitors, video projectors, tablet computers, and digital televisions.

Now with the cost effective Greenlee Professional Field Terminating HDMI®* Solutions, reduced cable clutter and custom length cables are just minutes away.

Pro Deluxe Kit

- Make custom length, premium

HDMI® cables.

- Eliminates cable clutter.

- Costs less than pre-terminated

cables.

Pro Kit

- Make custom length, premium

HDMI® cables.

- Eliminates cable clutter.

- Costs less than pre-terminated

cables.

Kit Includes:

- PA1192 HDMI® HDFT™ Cable Prep Tool

- PA8700 HDMI® HDFT™ Termination Tool

- PA1175 Media Cable Cutter

- TC-30 Deluxe Carrying Case

- (10) HDCN24-10 HDMI®* Field Terminating Connectors

PA4017 Pro Deluxe Kit $199.99

24 AWG Field Terminating Cable

- Use with Greenlee® HDFT™

Connectors.

- Make premium HDMI®* High

Speed with Ethernet cables.

- Supports HDMI®* 1.4 features:

3D, Ethernet and Audio Return.

- 100’ 24 AWG HDFT™ cable.

- Solid-core long grain copper.

- Fifth twisted pair for Ethernet and

audio return.

- Other HDMI®* 1.4** features supported: 10.2 Gbps Data Rate, 3D Video

Formats, Deep Color and 4k x 2k Resolution.

FTHD24-100 24 AWG HDMI Field Terminating Cable $299.00

HDMI Cables

Kit Includes:

- PA1192 HDMI®* HDFT™ Cable Prep Tool

- PA8700 HDMI®* HDFT™ Termination Tool

- HDCN24-10 HDMI®* Field Terminating Connectors

PA4019 Pro Kit $169.99

HDMI Field Terminating Connectors

- Make custom length, premium

HDMI® cables.

- Eliminates cable clutter.

- Costs less than pre-terminated

cables.

- 10 or 50 pack – 24 AWG HDFT™

Connector Components.

- Use With Greenlee® 24 AWG HDMI®* Field Terminating Cable only.

- Includes main connector terminal block and wire guides.

- Guides are mated and color coded for 24 AWG HDMI Field Terminating cable.

- Make custom length, premium HDMI®* High Speed with Ethernet cables.

HDCN24-10

HDCN24-50

HDMI Field Terminating Connectors (10 Pack)

HDMI Field Terminating Connectors (50 Pack)

$68.00

$299.99

3’

6’

10’

15’

25’

Right Angle

CHHR3

CHHR6

CHHR10

CHHR15

CHHR25

Designed to ensure a perfect transfer of digital video & multi channel audio signal.

- Supports resolutions 480I, 480P, 1080I, 1080P

- Version 1.3B

- Gold-Plated connectors

$12.35

$16.25

$21.90

$30.15

$65.55

Flat

CHHF3

CHHF6

CHHF10

CHHF15

CHHF25

$12.35

$16.25

$21.90

$30.15

$65.55

SVGA HD15 Cables

Supports 1080P, 3D & 4k over HDMI. Ethernet

Channel will allow ethernet enabled HDMI devices to share ethernet connections with other HDMI devices without the need for a separate ethernet cable.

- Version 1.4

HDMI14-3

HDMI14-6

HDMI14-10

HDMI14-15

HDMI 1.4 w/Ethernet 3’

HDMI 1.4 w/Ethernet 6’

HDMI 1.4 w/Ethernet 10’

HDMI 1.4 w/Ethernet 15’

HDMI14-CL25B HDMI 1.4 w/Ethernet 25’

HDMI14-CL35B HDMI 1.4 w/Ethernet 35’

HDMI14-CL50B HDMI 1.4 w/Ethernet 50’

HDMI Extender

$11.50

$14.15

$20.45

$36.25

$82.55

$125.00

$149.95

HDMI Extender by CAT-5e uses two pieces of CAT-5e cables to extend the HDTV display up to 30 meters.

For Cat6 users only one cable is required.

Length

6’

10’

15’

25’

50’

100’

Pin Cables

C15M15MS6

C15M15MS10

C15M15MS15

C15M15MS25

C15M15MS50

C15M15MS100

$13.50

$17.85

$22.95

$33.95

$59.95

$115.00

with 3.5mm Stereo

C15M15FS6

C15M15FS10

C15M15FS15

C15M15FS25

C15M15FS50

C15M15FS100

$13.50

$17.85

$22.95

$33.95

$59.95

$115.00

HHEX5E

HHEX6

HDMI Extender via 2x Cat5e Cables

HDMI Extender via Single Cat6 Cable

$95.00

$149.00

44

Datacomtools.com

TM

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

Patch Cables

Category 6 Patch Cable

UPT244P73L6

UPT244P77L6

UPT244P710L6

UPT244P714L6

UPT244P725L6

3’ Category 6 Patch Cable

7’ Category 6 Patch Cable

10’ Category 6 Patch Cable

14’ Category 6 Patch Cable

25’ Category 6 Patch Cable

Category 5e Patch Cable

UPT244P73L5

UPT244P77L5

UPT244P710L5

UPT244P714L5

UPT244P725L5

3’ Category 5e Patch Cable

7’ Category 5e Patch Cable

10’ Category 5e Patch Cable

14’ Category 5e Patch Cable

25’ Category 5e Patch Cable

$2.35/ea

$2.85/ea

$3.65/ea

$5.70/ea

$7.65/ea

$0.95/ea

$1.50/ea

$1.90/ea

$2.50/ea

$3.95/ea

Connect your workstations, printers, servers, and other devices with these cat.5E or cat.6 patch cables

- Connects RJ45 Male to RJ45 Male.

- Designed-in Snag-Less moldings

- The 50-Micron Gold Plated Connectors

maintain High Bandwidth & Maximum

Data Signal Integrity

- Made of Lead-Free & Environmentally

Safe Materials

RJ45 Plug Lock-in Device

Flush - Works with flush mount jacks

PSL-DCPL 10 RJ45 plug lock-in device (1) install tool $42.95

PSL-DCPL-C 100 RJ45 plug lock-in device (5) install tools $335.00

Recessed- works with reccessed jacks

PSL-DCPLR 10 RJ45 plug lock-in device (1) install tool $42.95

PSL-DCPLR-C 100 RJ45 Plug lock-in device (5) install tools $335.00

*Install tool is also needed to remove lock-in device

The RJ45 plug lock-in device is an innovative solution that secures connection to reduce network downtime, data security breaches, and hardware replacement due to theft.

The versatile design works with most existing patch cords, faceplates, patch panels, IP cameras & other IP devices

Gigabit Loopback Jack & Plug

The Gigabit Loopback Jack & Plug quickly and easily checks the RX/TX pairs of 1000 BASE network cables, helping a network technician determine if a network signal exists of if there are broken or shorted wires within the cabling.

Also is backwards compatible with 10base and 100base networks.

STO34LT02-06-001 Gigabit Loopback Jack & Plug $8.25

Category 6 Patch Panel Couplers and Jack Couplers

- Coupler panel ports provide fast and

easy plug and play connection of

6 and 8-position RJ45 patch cords

- No tools required

- Designed to exceed performance requirements of the ANSI/TIA-568-C.2

Category 6 and ISO 11801 2nd Edition Class E channel standards

- Contacts plated with 50 microinches of gold for superior performance

- Can be clearly identified with optional labels and icons

- Mounts to standard EIA 19” rack or 23” racks with optional extender bracket

CP24688BL 24-port, Category 6, patch panel $320.00

Category 5e Patch Panel Couplers and Jack Couplers

- Coupler panel ports provide fast and

easy plug and play connection of

6 and 8-position RJ45 patch cords

- No tools required

- Designed to exceed ANSI/TIA-568-C.2 Category 5e and all ISO 11801 2nd

Edition Class D channel requirements at swept frequencies up to 100 MHz

- Contacts plated with 50 microinches of gold for superior performance

- Can be clearly identified with optional labels and icons

- Mounts to standard EIA 19” rack or 23” racks with optional extender bracket

CP245E88BLY 24-port, Category 5e, patch panel $245.00

*Replace IW (White) for BL for Black.

Ethernet Crossover Adapter

The SuperLooper Gigabit Crossover

Adapter converts any standard Ethernet patch cable to a crossover cable for

1000 BASE networks. Used with a standard ethernet patch cable, this product can network two computers in a gigabit networks without requiring a hub

STO34LT02-07-001 Gigabit Crossover Adapter

- Designed to exceed performance

requirements of the ANSI/TIA-568-C.2

Category 5e and ISO 11801 2nd Edition

Class D channel standards

- Meet requirements of IEEE 802.3af and

IEEE 802.3at for PoE applications

- No tools required

- Contacts plated with 50 microinches of

gold for superior performance

CC5E88IW* Cat.5e RJ45, 8-position, 8-wire coupler module

$6.95

- Designed to exceed requirements of

the ANSI/TIA-568-C.2 Cat 6 & ISO 11801

2nd Edition Class E channel standards

- Meet requirements of IEEE 802.3af and

IEEE 802.3at for PoE applications

module provides plug and play

connection of 6 & 8-position RJ45 cords

- No tools required

- Contacts plated with 50 microinches of gold for superior performance

CC688IW* Cat.6 RJ45, 8-position, 8-wire coupler module $14.25

$10.25

45

Major Credit Cards Accepted

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

NextFrame Cable Management

Equipment

Racks

Front

Z-Channel Vertical Organizer

Back

Vertical

Organizers

Hubbell’s NextFrame® XXL cable management vertical organizers have been designed for today’s high density, high port count applications providing a simplistic way to manage and organize any type of communications cable.

The XXL design addresses two issues: larger cable diameter and separation of cables. XXL vertical organizers allow for the management of patch cords in the front and horizontal cable in the rear. Instead of combining cables from adjoining bays (‘H’ – Style), the XXL vertical organizers separate managed bundles on either side of the “Y”, providing improved identification and access.

XXL’s open design leaves horizontal cable unimpeded and accessible, while simplifying bundling and neatly securing them in place, allowing for future expansion with minimal effort.

Power strip mounting located behind cable near rear of switch gear

XXL wire basket holds & covers hundreds of patch cords

Protected area for fiber

Open Wire Frame ideal for horizontal cable

NEXTFRAME 3” and 6” Equipment Racks

Finish Rack Units Depth

Black

Black

24

36

45

48

51

45

3”

6”

Height 19” Wide

Equipment Rack

48” (1219) HPW48RR19

68.5” (1676) HPW66RR19

84” (2134) HPW84RR19

89.7” (2286) HPW90RR19

96” (2438) HPW96RR19

84” (2134) HPW84RR19D

$178.00

$195.00

$165.00

$285.00

$279.00

$298.00

23” Wide

Equipment Rack

HPW48RR23 $270.00

-

HPW84RR23 $342.30

HPW90RR23 $370.00

HPW96RR23 $365.00

-

Not eligible for free shipping

XXL Series Vertical Organizers

Door Insert Channel Depth 6” Wide

Silver

Silver

Black

Black

14 1/8

18 7/8

14 1/8

18 7/8

XS0610

XS0615

$710.00

$725.00

10” Wide

XS1010

XS1015

$780.00

$795.00

15” Wide

XS1510

XS1515

$805.00

$820.00

XS0610BK $710.00

XS1010BK $780.00

XS1510BK $805.00

XS0615BK $725.00

XS1015BK $795.00

XS1515BK $820.00

Not eligible for free shipping

*Note: Channel Depth does not include rear cable organizer. Rear cable organizer depth is 7 3/4”

Delivery Includes: Front and rear vertical organizer, door, 16 - 3” black cable management spools.

- 2 Z channels, 38.5”H x 12.5”D

- 2-38.5” Covers

- 4 Hinges and Gates

- 24 Spools

- 4 ½”-13x1” Bolt w/nut and lock washer

Color

Black

Black (no hinge cover)

Rack Height

In. (mm)

6” Wide 4 1/2” Wide 3 1/4” Wide

7” (2134) VS76H $325.75

VS74H $325.75

VS73H $328.75

7” (2134) VS76 $175.00

VS74 $175.00

VS73 $101.00

C-Channel Vertical Organizer

- 2 C channels, 38.5”H x 3.25”W x 10.5”D*

- 24 spools

- 4 Bolt, nut, washer ½” - 13 x 1”

46

Rack Height Inches (mm)

7” (2134)

Black Catalog #

VS73* $101.00

* Add “A” at the end of the Catalog # for Aluminum

Call for Volume Discounts

Datacomtools.com

TM

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

Hubbell Enclosures Full Size Cabinets

Airflow

- Intuitive design optimizes airflow by creating designated cable pathways away from

center of cabinet

- Can be used in front to rear, side to side, and bottom to top airflow configurations

Security

- 3-Point door locking system

- Standard locks for side covers

Administration

- Easier to identify and trace ports and cables

- Cable management spools with label fields to identify bundles of cable

- Unobscured cable pathways simplify tracing cables

Space Utilization

- Enhanced cable management features allow cable storage in the cabinet

Response Time

- Rack positions are identified on all four uprights aiding the installation of

new gear

- Cable management spools snap into place

- Optional split rail kits maximize cabinet utilization by accommodating

servers and switchgear in one cabinet

Aesthetics

- Stylized look enhances appearance of any computer room

- Cable management focused design manages and conceals cable bundles

*Network Cabinet

Type

Standard w/sides

Standard w/sides

Standard w/sides

Standard w/sides

Seismic Z4 w/sides

Seismic Z4 w/sides

Seismic Z4 w/sides

Seismic Z4 w/sides

Without sides

Without sides

Without sides

Without sides

*Server Cabinet

Standard w/sides

Seismic Z4 w/sides

Without sides

*Not eligible for free shipping

Rack Units Height

43

43

45

45

43

43

45

45

43

43

45

45

80”

80”

84”

84”

80”

80”

84”

84”

80”

80”

84”

84”

43

43

43

80”

80”

80”

Joining Kit

6 each of the following:

¼”-20 x ¾” hex bolts,

¼” lock washers, ¼” flat washers, ¼”-20 hex nuts

Width

30”

30”

30”

30”

30”

30”

30”

30”

30”

30”

30”

30”

24”

24”

24”

Caster Kit

Depth

32”

36”

32”

36”

32”

36”

32”

36”

32”

36”

32”

36”

42”

42”

42”

HPWJKIT $23.00

Caster Kit

Color

Black

Black

Black

Black

Black

Black

Black

Black

Black

Black

Black

Black

Black

Black

Black

Catalog No.

H2N8032

H2N8036

H2N8432

H2N8436

H2N8032Z4

H2N8036Z4

H2N8432Z4

H2N8436Z4

H2N8032E

H2N8036E

H2N8432E

H2N8436E

H2S8042

H2S8042Z4

H2S8042E

$2160.00

$2175.00

$2175.00

$2190.00

Call for pricing

Call for pricing

Call for pricing

Call for pricing

$1920.00

$1935.00

$1935.00

$1950.00

$1777.00

Call for price

$1945.00

Vertical Cable Management Bar

Jointing Kit

Equipment Shelves

Content: Stationary

16ga shelf, #12-24 mounting hardware

H2KMB $315.00

Cabinet Fan Kit, 460 CFM

For 80” Cabinet

For 84” Cabinet

H280CM $63.85

H284CM $63.85

Enclosure will accept 2 Fan Kits

Network Cabinet Fan Kit

Server Cabinet Fan Kit

H2KNF

H2KSF

$380.00

$385.00

Equipment Shelves, Cantilevered

Solid

Perforated

Solid

50lb

50lb

3.5”L x 17”W x 14”D MCCCS19

3.5”L x 17”W x 14”D MCCCS19P

$55.65

$70.20

200lb 7.0”L x 19”W x 20”D MCCCWS19HD $158.65

Equipment Shelves, Center-Weighted

Solid 75lbs 3.5”L x 17”W x 19”D MCCCWS19 $72.15

4-Post, 19” Equipment Rack

45

45

45

45

Rack

Units

45

45

Overall

Height

84”

84”

84”

84”

84”

84”

Usable

Height

79”

79”

79”

79”

79”

79”

Not eligible for free shipping

Overall

Width

20.2”

20.2”

20.2”

20.2”

20.2”

20.2”

Depth Hole Type Color

24” #12-24 Threaded Black

29.23” #12-24 Threaded Black

36”

24”

29.23”

36”

#12-24 Threaded

Square M6

Square M6

Square M6

Black

Black

Black

Black

Catalog No.

SF841924T

SF841929T

SF841936T

SF841924

SF841929

SF841936

$565.00

$585.00

$625.00

$635.00

$665.00

$695.00

Call for Volume Discounts

Major Credit Cards Accepted

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

47

Grounding and Bonding

Pre-configured grounding kits for outfitting racks, cabinets, and pathways

On-Rail Kits

19” Horizontal Busbar:

HBBBHR19KT

- (2) M6 screws, (2) #12-24

HBBBHR19KTTP

screws for mounting,

- (8) 6-32 thread forming

screws for lug attachment

Busbar to BN

Lug (DA), 60”

6AWG, (2) #12-24 screws and nuts,

(2) ¼” washers

ESD port for 4mm banana plug

5” Velcro® cable management strap

0.5oz Tube

Penetrox A

Antioxidant

HGRKTHC

HGRKTHC10

HGRKTHT

HGRKTHT10

In-Cabinet Kits

Notes

Horizontal on-rail

Horizontal on-rail, bulk

Horizontal on-rail, tin plated

Horizontal on-rail, bulk, tin plated

1

10

-

-

RGB Busbar

1

10

-

-

Busbar Conductor

1

10

1

10

1

10

1

10

Security

2

20

2

20

1

10

1

10

36” Vertical Busbar:

HBBBVR36KT

(3) M6 screws, (3)

#12-24 screws for bus(8) 6-32 thread forming screws for lug attachment

HBBBVR36KTTP

(3) M6 screws, (3) #12-

24 screws for busbar mounting, (16) 1/4-20 thread forming screws for lug attachment

Busbar to BN

Lug (DA), 60”

6AWG, (2) #12-24 screws and nuts,

(2) ¼” washers

ESD port for 4mm banana plug

5” Velcro® cable management strap

0.5oz Tube

Penetrox A

Antioxidant

$85.00

$710.00

$98.00

$840.00

HGRKTVC

HGRKTVC10

HGRKTVT

HGRKTVT10

Busbars

Notes

Vertical in-cabinet

Vertical in-cabinet, bulk

Vertical in-cabinet, tin plated

Vertical in-cabinet, bulk, tin plated

1

10

-

-

RGB Busbar

-

-

1

10

Busbar Conductor

1

10

1

10

1

10

1

10

Security

2

20

2

20

1

10

1

10

$105.00

$898.00

$119.00

$1025.00

Insulators & Mounting

Included

Copper

Copper, Tin Plated

TGB: 2” x 24”

Mounting for 9 x d & 9 x DA Lugs

HBBB14224B

HBBB14224BTP

$161.55

$210.80

TMGB: 4” x 16”

Mounting for 16 x DA &16x DB Lugs

HBBB14416H

HBBB14416HTP

$193.85

$253.85

Ground Wire Kits

- Complete solution for grounding standards

and tailored to each installation

Typical Applications Include

- Equipment to on-rail/in-cabinet busbar

- On-rail/in-cabinet busbar to TGB

- Equipment to TGB

- Rail/cabinet to TGB

Lug Key Hole Dia Hole Spacing Angle

D

DA

DB

DF

DN

0.25”

0.25”

0.375”

0.25”

0.25”

0.625”

0.75”

1.0”

0.625”

0.625”

-

-

-

45

90

6 AWG Ground Wire Kit Contents

Lug

- Traceable crimped, die indexed 7 Long barrel, inspection window

Labels

- Caution label applied at both ends

- Circle ground sticker

Antioxidant

0.5oz tube Penetrox A

Hardware

- (2) #12-24 stainless steel thread forming screws

- (2) M6 stainless steel thread forming screws

- (2) ¼-20 stainless steel hex bolts

- (2) ¼-20 stainless steel nuts

- (2) ¼” stainless steel washers

- (2) 3/8-16 stainless steel hex bolts

- (2) 3/8-16 stainless steel nuts

- (2) 3/8” stainless steel washer

Catalog #

HGRKTD30DF

HGRKTD30DN

HGRKTD45DN

HGRKTX60DN

48

Lug 1

No Lug

Datacomtools.com

TM

D

D

D

Call for Volume Discounts

Wire Length

30”

30”

45”

60”

Lug 2

DF: 45 Deg

DF: 90 Deg

DN: 90 Deg

DN: 90 Deg

Complete Installation Ground Wire Kit Part # Configurator

To create a ground kit part number, add 3 characteristics to the base HGRKT. For Example HGRKTDA30DN

BASE

Catalog #

LUG 1

Catalog #

LENGTH

Catalog #

LUG 2

Catalog #

HGRKT

HGRKT

D

DA

DB

DA

Accessories

30

45

60

90

144

30

Hardware & Accs Included

Hardware & Accs Included

Hardware & Accs Included

Hardware & Accs Included

D

DF

DN

DA

DB

DN

$42.75

$42.20

$44.35

$42.65

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

Ladder Rack

Straight Sections

Width inches

6’ (1829) length

Black Gray

10’ (3048) Length

Black Gray

6” (152) HLS0606B HLS0606G $46.85

HLS1006B HLS1006G $72.00

12” (305) HLS0612B HLS0612G $50.65

HLS1012B HLS1012G $79.65

18” (457) HLS0618B HLS0618G $58.40

HLS1018B HLS1018G $110.85

24” (610) HLS0624B HLS0624G $79.65

HLS1024B HLS1024G $110.85

Free shipping not included

Accessories

90° Turns

Width Inside 90° Black

Inches

6”

12”

18”

24”

Flat turns 90° Black Outside 90°Black

HLI0690B $56.05 HLF0690B $130.00 HLO0690B $56.05

HLI1290B $58.05 HLF1290B $135.00 HLO1290B $58.05

HLI1890B $62.05 HLF1890B $135.00 HLO1890B $62.20

HLI2490B $66.05 HLF2490B $154.65 HLO2490B $66.05

Width

Inches

6”

12”

18”

24”

Inside 90° Gray Flat Turns 90°Gray Outside 90° Gray

HLI1290B $56.05 HLF0690G $130.00 HLO0690G $56.05

HLI1290G $58.05 HLF1290G $135.00 HLO1290G $58.05

HLI1890G $62.05 HLF1890G $135.00 HLO1890G $62.20

HLI2490G $66.05 HLF2490G $154.65 HLO2490G $66.05

Free shipping not included

Butt Splice Kit

Finish: Black Powder Coat

HLBSK $7.25

Cable Radius Drop

Finish: Black Powder

Ladder

Width

HLCD06 6”

HLCD12

12”

Actual

Width

4.5” $49.60

10.75” $73.25

HLCD18 18” 16.75” $74.40

HLCDS stringer 7.5” $50.25

Cable Retaining Fence Posts

HLP06XX

Nom

Height

6”

Actual

Height

8.3”

HLP10XX 10” 12.4”

$13.90

$15.15

XX = Color: B (Black) and G (Gray)

Ceiling Mounting Kit

HLCMK Ceiling mounting kit with two 6’ threaded rods

HLCF Brackets only

$52.05

$34.65

Triangle Wall Support

Width

HLTSB06XX

6”

$26.00

HLTSB12XX 12” $30.95

HLTSB18XX 18” $32.75

HLTSB24XX 24” $34.75

XX = Color: B (Black) & G (Gray)

Vertical Wall Bracket

Finish: Black Powder Coat

HLVWBK $7.50

Wall Angle Support

Color: Black

HLX0612*

HLX1518*

HLX24*

Width

6-12”

18”

24”

$20.55

$21.00

$22.95

*Add “G” to part number for Gray.

Wall/Rack Mounting Kit

Contents: 1 HLMPK19, 1 HLX0612,

1 40” L X 12” W ladder section

HLWRK Black $118.65

Foot Kit

Finish: Black Powder Coat

HLRF $26.05

J-Bolt Kit

HLJB $4.00

Mounting Kit to Relay Rack

HLMPK19 3” $26.20

HLMPK19D 6” $33.25

Protective End Caps

HLECPK2 $8.90

Major Credit Cards Accepted

Swivel Splice Kit

HLSSK $49.80

T-Junction Splice Kit

HLTK $7.25

Call for Volume Discounts

49

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

Hubbell OptiChannel High Density FCR Fiber Enclosures and Cassettes

High Density 144 Port 1U Enclosures

- 144 Max LC Port Capacity

- 1 Rack Unit

- Dimensions in Inches (mm):

H:1.75” (44) x W: 19” (483) x D:17” (432)

Ultra Compact LC to MTP Cassettes

- MM total insertion loss: <1.5dB max

- SM total insertion loss: <1.1dB max

- SM return loss: >50dB

- Material: 5052 aluminum

- Polarity: TIA-568-C.3, Type “A”

FCRHD1UBK loaded with OCLCHD50G3

FCRHD1UBK

FCRHD1UGY

High Density 144 Port 1U Enclosures (Black)

High Density 144 Port 1U Enclosures (Gray)

Enhanced Rack Mounted Enclosures

$652.00

$652.00

Port Count Height x Width x Depth

12

12

12

0.5” x 3.5” x 5.2”

0.5” x 3.5” x 5.2”

0.5” x 3.5” x 5.2”

Fiber Type

50µm, OM3 OCLCHD50G3

50µm, OM4

SM, 0S2

Part #

OCLCHD50G4

OCLCHDSM

Standard SC/LC-MPO Cassettes

$315.00

$325.00

$355.00

FCR3U12SP loaded with various

FSP Series panels Can be used with MPO Cassettes

Note: Standard LC-MPO cassettes are not compatible with the HD enclosures.

24-Port versions supplied with two MPO

12-fiber receptacles.

3

4

1

2

Rack

Units

Height x Width x Depth

1.75” X 17” X 17”

3.5” X 17” X 17”

5.25” X 17” X 17”

7.00” X 17” X 17”

MPO

Capacity

Cassettes

3

6

12

15

Splice

Tray

2

6

12

16

Max LC

Port

Part #

72 FCR1U3SP $255.00

144 FCR2U6SP $261.50

288 FCR3U12SP $341.35

360 FCR4U15SP $384.00

MTP to MTP Cords, 12 Fiber, 50µm, 10G

On spool with pulling grip attached to one end.

FPCMTP50G10 MTP to MTP Cords: 10’ $374.65

FPCMTP50G25 MTP to MTP Cords: 25’ $582.65

FPCMTP50G50 MTP to MTP Cords: 50’ $930.00

FPCMTP50G100 MTP to MTP Cords: 100’ $1560.00

Description

SC duplex

LC duplex

LC duplex

LC quad

SC duplex

LC duplex

LC duplex

LC quad

Port Count

12

12

24

24

12

12

24

24

Fiber Type

50µm, OM3

50µm, OM3

50µm, OM3

50µm, OM3

50µm, OM4

50µm, OM4

50µm, OM4

50µm, OM4

Part #

OCSC50G

OCLC50G

OCLCD50G

OCLCQ50G

OCSC50G4

OCLC50G4

OCLCD50G4

OCLCQ50G4

MPO to MPO 12-Fiber Round Cords, OFNP Rated Plenum, 10G x = Length in meters or feet

(no zeros preceding value) f = Feet (leave blank for meters) n = No pulling eye

$410.00

$435.00

$585.00

$585.00

$393.60

$565.00

$565.00

$565.00

FPCPMTP50G3M xfn MPO to MPO 12-Fiber Round Cords, 50µm, OM3 Call for pricing

FPCPMTP50G4M xfn MPO to MPO 12-Fiber Round Cords, 50µm, OM4 Call for pricing

FPCPMTPS xfn MPO to MPO 12-Fiber Round Cords, SM, OS2 Call for pricing

Keyed LC Multimode OM3 Patch Cords

OptiChannel™ Fiber Adapter Panels

SC Duplex, Beige, 3 Adapters

SC Duplex, Beige, 6 Adapters

SC Simplex, Blue, 6 Adapters

SC Simplex, Blue, 8 Adapters

SC Duplex, Blue, 3 Adapters

SC Duplex, Blue, 6 Adapters

ST-style, Blue, 6 Adapters

ST-style, Blue, 8 Adapters

SC to ST-style, Blue, 3 Adapters

SC to ST-style, Blue, 6 Adapters

MT-RJ, 6 Adapters

MT-RJ, 8 Adapters

LC Quad, 3 Adapters

LC Quad, 6 Adapters

APC, SC Simplex, Green, 6 Adapters

APC, SC Simplex, Green, 8 Adapters

LC 12-port (6 LC duplex)

LC 24-port (12 LC duplex)

FSPSCDBE3

FSPSCDBE6

FSPSC6

SPSC8

FSPSCD3

FSPSCD6

FSPST6

FSPST8

FSPSCST3

FSPSCST6

FSPMTRJ6

FSPMTRJ8

FSPLCQ3

FSPLCQ6

FSPSCA6

FSPSCA8

FSPLCDS6xx

FSPLCDS12xx xx = Color: AQ (Aqua), BE (Beige), BK (Black), B (Blue), GN (Green), OR (Orange), R (Red), and Y (Yellow).

$41.85

$78.95

$33.35

$42.45

$31.40

$59.20

$26.40

$44.75

$41.40

$78.20

$64.55

$80.95

$68.05

$131.45

$64.90

$85.40

$92.45

$138.00

Keyed LC

Keyed LC to Keyed

LC 50μm

Keyed LC to standard LC 50μm

Keyed LC to standard SC 50μm

Standard LC Standard SC

01 02 yy =

03 05 10

KLCDFP50GMyyxx $81.35 $85.00 $89.00 $96.55 $115.00

KLCDFPLC50GMyyxx $77.05 $80.10 $84.60 $92.20 $110.00

KLCDFPSC50GMyyxx $77.05 $80.10 $84.60 $92.20 $110.00

yy = Standard Lengths: 01, 02, 03, 05, and 10 meters.

xx = Standard Housing Colors: RD(Red), YL (Yellow), GN (Green), and BL (Blue).

Special Colors: AQ (Aqua), BR (Brown), OR (Orange), RO (Rose), SL (Slate), and VI (Violet).

Hubbell OptiChannel Keyed LC Adapter Panels

Adapter panel, keyed

LC duplex

12 Port

24 Port

FSPKLCDS6xx

FSPKLCDS12xx

Note: Individually bagged with dust caps installed.

xx = Standard Housing Colors: RD (Red), YL (Yellow), GN (Green), and BL (Blue).

Special Colors: AQ (Aqua), BR (Brown), OR (Orange), RO (Rose), SL (Slate), and VI (Violet).

$155.00

$250.00

Call for Volume Discounts

50

Datacomtools.com

TM

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

Hubbell BIDnet Pre-Terminated Fiber Trunk Assemblies

40 Gb/s and 100 Gb/s MTP Fiber Cords

Available Options

- Connectors: MTP female, 12-fiber or 24-fiber

- Fiber types: 50/OM3, 50/OM4

- 40 Gb/s fiber strand count: 12, 24 & 48 fibers

- 100 Gb/s fiber strand count: 24 & 48 fibers

- Cable: plenum, riser, or LSZH

- Polarity: 40GBASE-SR4 or 100GBASESR10

- Lengths: 1 to 150 meters (3 to 500 ft)

- Application limits:

- OM3 40G/100G limit: 100 m (328 ft)

- OM4 40G/100G limit: 150 m (492 ft)

Category 6A UTP System

NEXTSPEED® Ascent Category 6A, Component Compliant Jacks

Colors Available

AL

GY

P

BK

GN

R

B

LA

BN

EI

OW

W

GL

OR

Y

Category 6A, Component

Compliant Jacks

Single 25-Pack

HJ6AXX $11.25 HJ6AXX25 $245.00

Call for Custom Quotes

NEXTSPEED® Ascent Category 6A, Component Compliant Patch Panels

Distribution Trunks and Pigtails

Available Options

- Connectors: LC, MSFP, keyed LC, SC, SC/APC, ST,

FC, FC/APC

- Fiber types: 62/OM1, 50/OM2, 50/OM3,

50/OM4, SM/OS2

- Fiber count: 6, 12, 24, 48, 72, & 96 fibers

- Cable: plenum, riser, or LSZH

(armored/non-armored)

- Fan-out options: 900 micron buffer

Call for Custom Quotes

*Add an “S” at the end of the part number to be offered in silver. Standard color is black.

Note: HP6Axx angled panel protrudes 4.46” from the plane of the rack. Hubbell recommends one (1) extra inch of space between the door and panel angle.

Transition Assemblies

Available Options

- Connectors: MTP female to LC or SC duplex

- Fiber types: 50/OM3, 50/OM4, SM/0S2

- Fiber strand count: 12, 24 & 48 fibers

- Cable: plenum, riser, or LSZH

(armored or non-armored)

- Polarity: TIA-568C.3, Type A,B or C

- Fan-out: 2.0mm furcation tubing

Call for Custom Quotes

Distribution Fan-Out Trunks and Pigtails

Available Options

- Connectors: LC, MSFP, keyed LC, SC, SC/APC, ST,

FC, FC/APC

- Fiber types: 62/OM1, 50/OM2, 50/OM3,

50/OM4, SM/OS2

- Fiber strand count: 6, 12, 24, 48, 72, 96

- Cable: plenum, riser, or LSZH

(armored or non-armored)

- Fan-out: 2.0mm furcation tubing

Call for Custom Quotes

Mesh Bundle Trunks (2.0mm Duplex Zip Cord)

Available Options

- Connectors: LC, MSFP, keyed LC, SC, SC/APC, ST,

FC, FC/APC

- Fiber types: 62/OM1, 50/OM2, 50/OM3,

50/OM4, SM/OS2

- Fiber strand count: 6, 12, 24, 48, 72, 96

- Cable: plenum, riser, or LSZH

- Outer sheath: polyester mesh

Call for Custom Quotes

48

96

24

48

Ports Height Width Units

24 1.75”

3.50”

7.00”

1.75”

3.50”

19”

19”

19”

19”

19”

4

1

1

2

2

Style Part #

Straight HP6A24U* $325.00

Straight HP6A48U* $580.00

Straight HP6A96U* $945.00

Angle HP6A24AU $325.00

Angle HP6A48AU $585.00

NEXTSPEED® Ascent Category 6A, Component Compliant Patch Cords

Colors Available

P

R

BK

BN

B

W

PK

Y

OR

GN

Category 6A Patch Cords, 1’

Category 6A Patch Cords, 3’

Category 6A Patch Cords, 5’

Category 6A Patch Cords, 7’

Category 6A Patch Cords, 10’

Category 6A Patch Cords, 15’

Category 6A Patch Cords, 20’

HC6AXX01

HC6AXX03

HC6AXX05

HC6AXX07

HC6AXX10

HC6AXX15

HC6AXX20

$8.45

$12.60

$15.00

$17.35

$21.05

$27.15

$33.20

NEXTSPEED® Ascent Category 6A, Component Compliant Cable

Colors Available

B GY W Y

Note: All category rated cable is packaged in 1000 foot quantities.

Category 6A Cable

Plenum Spool

C6ASPXX Call

Riser Spool

C6ASRXX Call

NEXTSPEED® Ascent Category 6A solution is a tuned system of structured cabling components designed and balanced to work together to support bandwidth beyond 625MHz. NEXTSPEED® Ascent provides the highest level of reliability with a 0 bit error rate of 10-13.

Call for Volume Discounts

51

Major Credit Cards Accepted

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

Category 6A Shielded System

NEXTSPEED® Shielded Category 6A Jacks

Unit of Measure

2 per bag

24 per bag

A-Wired

SJ6A2A

SJ6A24A

$22.60

$235.00

NEXTSPEED® Shielded Patch Panels, Unloaded

B-Wired

SJ6A2B

SJ6A24B

$22.60

$235.00

Note: Jacks are sold separately.

24

48

24

48

Ports Height Width Units

24 1.75” 19”

1.75” 19”

3.50” 19”

1.75” 19”

3.50” 19”

1

1

2

1

2

Type

Flat

Flat

Flat

Color

Silver PSJ24S

Black

Black

Part #

PSJ24BK

PSJ48BK

Angled Black PSJ24AU

Angled Black PSJ48AU

$79.35

$79.35

$78.00

$79.35

$85.85

NEXTSPEED® Shielded Category 6A, Patch Cords

Colors Available

B BK GY Y yy = Standard Length: 03 (3’), 05 (5’), 07

(7’), 10 (10’), 15 (15’), 20 (20’), 25 (25’).

xx = Color: B (Blue), BK (Black), GY (Gray), and Y (Yellow).

Made-to-order lengths are available from

30ft to 75ft in 5ft increments.

PC6AXXYY NEXTSPEED® Shielded Cat 6A, Patch Cords Call for pricing

NEXTSPEED® Ascent 10GbE, FTP Cable, 4-Pair

10Gb, FTP Cable

Plenum Spool

C6AFTPSPXX

Colors Available

B GY W Y

Note: All category rated cable is packaged in 1000 foot quantities.

Riser Spool

Call C6AFTPSRXX Call

NEXTSPEED® Ascent Shielded Category 6A, Trunk Cable Assemblies

BIDnet Pre-Terminated Copper improve air flow in the datacenter, decrease installation time and will supply superior performance.

- Simplifies installation time by 75%

- Reduces initial installation cost by 30%

- 100% factory tested and assembled

- Mission Critical 25-Year Warranty

Call for Custom Quotes

Category 6 System

NEXTSPEED® Category 6 Jacks

- Industry’s first tested category 6 component

compliant jack.

- Exclusive 1-Punch Termination Tool reduces time

by 75%.

- 2,000+ mating cycles with FCC compliant

8-position plug.

Colors Available

AL BK B EI GL GY GN LA OW OR P R TI W Y

HXJ6XX NEXTSPEED® Category 6 Jack, Universal $6.75

NEXTSPEED® Category 6, Universal Patch Panels

Consolidation points are an interconnection between the telecom room to the telecom outlet.

Using consolidation points, new wiring for a work station in an open office environment need extend only as far as the consolidation point, not all the way back to the telecommunication room. This provides for increased flexibility and economy when work stations require frequent re-configuration.

P612U

P6E24U

P6E48U

P6E96U

P624AU

P648AU

MUTOA, Category 6, Universal 89D, Black, 12-port

Patch Panel, Category 6, Universal, Black, 24-port

Patch Panel, Category 6, Universal, Black, 48-port

Patch Panel, Category 6, Universal, Black, 96-port

Patch Panel, Category 6, Angled, Black, 24-port

Patch Panel, Category 6, Angled, Black, 48-port

NEXTSPEED® Category 6, Patch Cords

$99.75

$155.00

$300.00

$580.00

$178.00

$355.00

Colors Available

BK

P

B

R

GY

W

GN

Y

OR yy = Standard Length: 03 (3’), 05 (5’), 07 (7’), 10

(10’), 15 (15’), 20 (20’), 25 (25’).

xx = Color: B (Blue), BK (Black), GY (Gray), Y

(Yellow), GN (Green), OR (Orange), P (Purple), R

(Red), and W (White)

Made-to-order lengths are available from 30ft to

75ft in 5ft increments.

HC6XXYY NEXTSPEED® Category 6, Patch Cords

NEXTSPEED® Category 6, UTP Cable, 4-Pair

Colors Available

B GY W Y

Note: All category rated cable is packaged in

1000 foot quantities.

Cat6, UTP Cable

Call for pricing

Plenum Spool

C6RPXX Call

Riser Spool

C6RRXX Call

52

Ascent Shielded Category 6A is a tuned system of structured cabling components designed & balanced to work together delivering headroom beyond 500MHz. Ascent Shielded systems provide the highest level of reliability with additional protection against ANEXT and other external noise sources.

Call for Volume Discounts

Datacomtools.com

TM

The NEXTSPEED® Category 6 system is designed to deliver headroom beyond 500MHz for dependable Multi-gigabit Ethernet applications.

NEXTSPEED‘s extended bandwidth provides reliability with zero bit error rate performance for today’s high speed digital communications.

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

Colors Available

BK

P

B

R

GY

W

GN

Y

OR

Ascent 40 Gb/s QSFP+ Passive Copper Assemblies

NEXTSPEED® Ascent 40 Gbs QSFP+ passive copper cable assemblies are tuned cabling components designed and balanced to exceed industry standard performance specifications for InfiniBand QDR,

40G Ethernet, and SAS Channel applications.

Ascent 40 passive copper assemblies are compliant with the InfiniBand Architecture, SFF-8436 specifications and provide connectivity between devices using QSFP ports.

Ascent 40 passive copper assemblies are a cost-effective short link connectivity solution for the data center and are available in a wide range of wire gauges and lengths from 24-30AWG in lengths from

0.5m for 30AWG to 10m for 24AWG.

Don’t jeopardize your network: NEXTSPEED® Ascent 40 QSFP+ copper cable assemblies are the product for the digital world. They significantly reduce power consumption and EMI emission, providing a migration path for tomorrows emerging network applications.

- Patent Pending PairShield™ Minimizes Crosstalk

- Ergonomic Easy Plug and Play Connection

- 40 GIG-IB-QDR Certified

- Reduce Power Consumption and EMI Emission

Part # Description

HC3040G05M NextSpeed, Ascent, 40 Gb/s, 30AWG, BK, 05M

HC3040G1M NextSpeed, Ascent, 40 Gb/s, 30AWG, BK, 1M

HC3040G2M NextSpeed, Ascent, 40 Gb/s, 30AWG, BK, 2M

HC3040G3M NextSpeed, Ascent, 40 Gb/s, 30AWG, BK, 3M

HC3040G4M NextSpeed, Ascent, 40 Gb/s, 30AWG, BK, 4M

HC3010G5M NextSpeed, Ascent, DDR, 10 Gb/s, 30AWG, BK, 5M

HC2840G05M NextSpeed, Ascent, 40 Gb/s, 28AWG, BK, 05M

HC2840G1M NextSpeed, Ascent, 40 Gb/s, 28AWG, BK, 1M

HC2840G2M NextSpeed, Ascent, 40 Gb/s, 28AWG, BK, 2M

HC2840G3M

NextSpeed, Ascent, 40 Gb/s, 28AWG, BK, 3M

HC2840G4M NextSpeed, Ascent, 40 Gb/s, 28AWG, BK, 4M

HC2840G5M NextSpeed, Ascent, 40 Gb/s, 28AWG, BK, 5M

HC2810G6M NextSpeed, Ascent, DDR, 10 Gb/s, 28AWG, BK, 6M

HC2640G2M NextSpeed, Ascent, 40 Gb/s, 26AWG, BK, 2M

HC2640G3M NextSpeed, Ascent, 40 Gb/s, 26AWG, BK, 3M

HC2640G4M NextSpeed, Ascent, 40 Gb/s, 26AWG, BK, 4M

HC2640G5M NextSpeed, Ascent, 40 Gb/s, 26AWG, BK, 5M

HC2640G6M NextSpeed, Ascent, 40 Gb/s, 26AWG, BK, 6M

HC2640G7M NextSpeed, Ascent, 40 Gb/s, 26AWG, BK, 7M

HC2640G8M NextSpeed, Ascent, 40 Gb/s, 26AWG, BK, 8M

HC2440G10M NextSpeed, Ascent, 40 Gb/s, 24AWG, BK, 10M

Features:

- Options up to 8m for 40Gb/s applications.

- Controlled termination for lowest multi-aggressor crosstalk to assure error

free interconnects.

- Low insertion loss.

- BER better than 10-15.

- Serial numbers printed on each end.

Applications

- Data center

- InfiniBand 4X SDR, DDR, QDR

- Ethernet 10G,40G

- Rapid IO

- Myrinet 40G

- Top of Rack (Sever-to-Server)

- HPC Server Clusters

- Storage Area Networks (SANs)

Cable

Type

Passive

Passive

Passive

Passive

Passive

Passive

Passive

Passive

Passive

Passive

Passive

Passive

Passive

Passive

Passive

Passive

Passive

Passive

Passive

Passive

Passive

6.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

10.0

4.0

5.0

0.5

1.0

2.0

3.0

4.0

5.0

(meters) (mm) (mm)

Length Cable Dia. Min Bend

0.5

1.0

2.0

3.0

6.20

6.20

6.20

6.20

6.20

6.20

7.80

7.80

Radius

30

7.80

7.80

7.80

7.80

7.80

9.80

9.80

9.80

9.80

9.80

9.80

11.00

11.00

50

50

50

50

40

40

40

40

50

50

60

60

30

40

40

40

30

30

30

30

28

28

28

26

28

28

28

28

Wire

Gauge

30

30

30

30

30

30

26

26

26

26

26

26

24

InfiniBand

DDR QDR 40 Gb

Yes Yes

Yes Yes

Yes Yes

Yes Yes

Yes

Yes

Yes

-

Yes Yes

Yes Yes

Yes Yes

Yes Yes

Yes Yes

Yes Yes

Yes -

Yes Yes

Yes Yes

Yes Yes

Yes Yes

Yes Yes

Yes -

Yes Yes

Yes -

Ethernet

Yes

Yes

Yes

Yes

-

Yes

Yes

Yes

Yes

Yes

-

Yes

-

Yes

Yes

Yes

Yes

-

Yes

Yes

Yes

6G SAS

Yes $74.95

Yes $81.60

Yes $95.05

Yes $108.45

Yes $121.95

Yes $135.00

Yes $74.10

Yes $80.65

Yes $93.00

Yes

$105.45

Yes $117.95

Yes $130.35

Yes

Yes

$145.35

$97.40

Yes $112.05

Yes $126.75

Yes $144.00

Yes $157.35

Yes $172.00

Yes $185.00

Yes $101.35

- Enterprise Data Center Networks

Specifications:

Cable Construction:

- TwinAx: Fully shielded differential pairs. - DC blocking caps (0.1uF) on Rx only.

- UL style CL2 or CM.

- Impedance: 100. +/- 10 OHMS.

Plug Material:

- Pads – Gold plated over nickel over

copper base material.

Environmental:

- Operating Temperature Range:

– 20°C to 75°C.

- EEPROM programmed per SFF8436.

- IC module select buffer included.

- Shell & Latch Mechanism – Zinc die

cast; nickel over copper plating.

Mechanical:

- Latch retention force: 90n (20.2lbs) min. - Durability - 250 Cycles.

BIDnet™ Pre-terminated Assemblies

BIDnet™ (Building Infrastructure Design for Networking) Pre-terminated Assemblies are the ideal solution for data centers, open office and other applications where accuracy, reliability and performance are required.

BIDnet Pre-terminated Assemblies provide simplicity for permanent links between switches, servers and patch panels, MUTOAs and zone distribution areas, enabling easy MACs (moves, adds and changes) to the infrastructure.

Featuring 100% factory tested assemblies that reduce installation time and labor, compared to traditional field terminated permanent links.

Go Green with BIDnet Pre-terminated Assemblies - BIDnet assemblies are provided to the exact specification length reducing jobsite waste.

Applications

- Server to Server

- Switch to Switch

- Patch Panel to Patch Panel

- Intra-Cabinets

- MUTOAs

- Zone Distribution areas

- Open Office

- Modular Furniture

Call for Quote

Call for Volume Discounts

53

Major Credit Cards Accepted

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

Floor-Mounted Pathway Support

A

Introducing a breakthrough in zero-u pathway support and routing

In mission critical data center networks, physical infrastructure must provide the right avenue for upgrades and system maintenance as well as flexibility for future growth. Leviton’s Floor-Mounted Pathway Support is the ideal solution to meet these requirements. This unique frame provides a full support for pathway lighting, power, cabling, and other infrastructure.

The Floor-Mounted Pathway Support solves three main issues in data centers (DC):

1. Rapid Swap-Out and Staging

Many DCs accomplish equipment changes or additions via an entire cabinet swap-out. With the Floor-

Mounted Pathway Support, racks and cabinets are not attached to the overhead infrastructure, allowing power and cabling to be quickly disconnected from the cabinet without removing hardware. Connections within the cabinet can be easily disconnected, making room for new equipment to be rolled in & connected.

2. Overhead Space and Access

In many facilities, access to the ceiling in the DC may be limited due to blockage by utility ducting and pipe or because the height requires substantial labor. Also, the roof structure may not allow the added weight from cables and ladder trays. Pathway Supports can carry the load and avoid obstructions while freeing up rack space by adding patching above cabinets or racks.

3. Time and Labor savings

Installing overhead-suspended ladder trays on tall ceilings is cumbersome and time consuming. When ladder trays and wiring baskets are hung from the ceiling it is necessary to ‘thread’ the cable and trunks through all of the ceiling supports, adding to the labor at the time of initial installation and whenever moves, adds, or changes (MACs) are made. Using Floor-Mounted Pathway Supports can reduce installation time by 40% in a typical installation.

B C D E F

Mounting Hole Detail

* Ordering instructions for frame height and width:

1. Determine the upright height (XXX inches)

2. Determine cross member width (YY inches)

Max. and Min. Frame Dimensions

Max

Height (xxx)

Width (yy)

112”

48”

Min

82”

24”

[C]

[D]

[E]

[F]

Floor-Mounted Pathway Support & Accessories

Description

[A]

[B]

Floor-Mounted Pathway Support

6/6” Frame Extension Mounting C-Bracket

8/8” Frame Extension Mounting C-Bracket

12/8” Frame Extension Mounting C-Bracket

20/8” Frame Extension Mounting C-Bracket

12/18” Frame Extension Mounting C-Bracket

24/12” Frame Extension Mounting C-Bracket

24/20” Frame Extension Mounting C-Bracket

30/24” Frame Extension Mounting C-Bracket

Sub-floor Mounting Kit

Patch Panel Bracket

Channel Attachment Bracket Kit

Frame Drill Template

Part No.

575-73xxx-yy* Call for pricing

530-60606-001 Call for pricing

530-60808-001 Call for pricing

530-61208-001 Call for pricing

530-62008-001 Call for pricing

530-62018-001 Call for pricing

530-62412-001 Call for pricing

530-62420-001 Call for pricing

530-63024-001 Call for pricing

530-50000-006 Call for pricing

530-50000-007 Call for pricing

575-73000-001 Call for pricing

530-50000-008 Call for pricing

Features

- Flexibility – design a custom system for your needs

- Works w/any cabinet, cable tray, ladder or

raceway, including Leviton Fiber Raceway System

- Scalable for growth: add more at any time

- Mounting pads do not interfere w/cabinet wheels

- System accessories require no rack unit space

- Grounding and bonding ready

Benefits

- Better for high ceiling data centers

- Enables offline cabinet build out

- Easy to add/remove pre-configured trunks/cabling

- Reduced installation costs & less on-site problems

- Allows expansion w/o disruption of operations

- Allows efficient management of infrastructure

- Minimizes installation time and risk

- Expedites time to “live operation”

Design Considerations

Frame loading: Max. mounted equipment weight shall not exceed 400 lbs. when frames are installed

8’ apart, bearing upon 2, 102”H x 42”W frames joined by 2 sections of 1 5/8” x 1 5/8” 12-gauge steel channel,

- Recommended max. span between frames is 8’

- Recommended that Unistrut® Metal Framing

System be mounted between pathway supports

- Follow TIA recommendations for grounding

Physical Specifications

Dimensions: See following page for details

Height: Max 112”, Min 82”

Width: Max 48”, Min 24”

Materials: Steel – 24-AWG powder-coated black

Packaging: Boxed and palletized - Flat

Accessories

- Sub Floor Mounting kit – plate for bottom of a

raised floor tile that accepts standard threaded rod

- C-Brackets create a two-tier mounting surface for

ladder trays or wire baskets. Available in a variety

of sizes: 6/6”, 8/8”, 12/8”, 20/8”, 20/18”,

24/20”, 20/24”

- Left/Right brackets to mount standard steel

channel framing to span the pathway support

- Patch Panel Bracket –A bracket that is mounted

on the steel channel above the cabinet and

accepts standard 19-in patch panels or other fiber

enclosures providing up to 4U of additional

patching capability

- Frame drill template — custom to your support

system

Call for Volume Discounts

Free shipping not included

54

Datacomtools.com

TM

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

Large Enterprise & Data Center Applications

Key Features

- Stylish and innovative design for today’s most advanced networks and settings

- Removable sliding tray releases from front or rear of enclosure to facilitate field terminations and splicing

- Sliding tray glides forward and backward providing accessibility to front and rear of bulkhead after installation

- 17” depth for high density fi ber termination and/or splicing

- Removable, hinged doors & slide away covers allow easy access during install & visibility of interior after install

- Accepts injection molded splice trays and 4’’ x 7’’ metal splice trays

- Removable rubber grommets route pre-terminated fi ber trunks, protect cables, and minimize dust build up

- Patch cord bend radius guides minimize macro bending of routed fibers

- Stackable, adjustable, and multi-position configurable fi ber rings simplify cable management

- Constructed of durable polycarbonate plastic & 16-gauge steel, powder-coated black

- Multiple mounting bracket positions for 19” or 23” rack & cabinet (23” 1RU mounting bracket sold separately)

- Adjustable mounting bracket extends enclosure 4” from rail

- Accessory kit consists of cable ties, mounting ear screws, port ID labels, and spiral wraps (for cable protection)

- Optional cable strain relief mounting kits (for installation on side of enclosure or on rack post)

Part #

Opt-X Ultra 1RU 5R1UH-S03

Opt-X Ultra 2RU 5R2UH-S06

Opt-X Ultra 4RU

5R4UH-S12

Fibers Listing Adapter Plates Splice Trays MTP Modules

72

144

288

3

6

12

3

6

12

3

6

12

$249.00

$334.95

$468.25

Medium Enterprise Applications

Key Features

- Sliding tray (optional in 1RU & 2RU) removes completely from enclosure for ease of field terminations & splicing

- Sliding tray glides (w/stop) forward & backward, providing accessibility to front & rear bulkhead after installation

- 15” depth for high-density fi ber termination and/or splicing

- Stackable & adjustable fi ber rings simplify cable organization

- Front saddles pivot for improved patch cord routing

- Removable front & rear covers for better access to interior of enclosure

- Removable rubber grommet allows for pre-terminated fiber trunk install, protects cable, & dust build-up

- Accepts injection molded splice trays & 4’’ x 7’’ metal splice trays

- Constructed of 16-gauge steel, powder-coated black

- Capable of storing up to 3 meters of 900 μm tight buffered fiber per adapter

- Adapter plate on 3RU/4RU orients horizontally or vertically for optimal density

- Accessory kit consists of cable ties, ear screws, port ID label, & spiral wrap (cable protection for sliding tray units)

- Optional cable strain relief mounting kits (for installation on side of enclosure or on rack post)

Part #

Opt-X 1000i, 1RU 5R1UM-S03

Opt-X 1000i, 2RU 5R2UM-S06

Opt-X 1000i, 3RU

Opt-X 1000i, 4RU

5R3UM-F09

5R4UM-F12

Fibers Listing Adapter Plates Splice Trays MTP Modules

72

144

216/288

288/360

3

6

9/12

12/15

3

6

12

12

3

6

9/12

12/15

$190.00

$239.75

$247.35

$287.45

Opt-x Ultra 4RU (5R4UH-S03)

Opt-X Ultra 2RU (5R2UH-S06)

Opt-X Ultra 1RU (5R1UH-S03)

Opt-X 1000i, 1RU (5R1UM-S03)

Opt-X 1000i, 2RU (5R2UM-S06)

Opt-X 1000i, 3RU (5R3UM-F09)

Opt-X 1000i, 4RU (5R4UM-F12)

Small Enterprise Applications

Key Features

- Flush-mount adapter bulkhead for ease of moves, adds, and changes

- Stackable fi ber rings simplify cable routing and organization

- One-piece removable cover allows for complete accessibility to the back of the enclosure

- Constructed of 16-gauge steel, powder-coated black

- Accepts Opt-X adapter plates and/or Opt-X MTP® modules/cassettes

- Accepts injection molded splice trays and 4’’ x 7’’ metal splice trays

- Enclosure is capable of storing up to 3 meters of 900 μm tight buffered fi ber per adapter

- Accessory kit consists of cable ties, mounting ear screws, and port ID label

- Optional cable strain relief mounting kits (for installation on side of enclosure or on rack post)

- 1RU and 3RU flush-mount panels accept Opt-X adapter plates and mount to 19’’ racks and cabinets

- Optional add-on patch cord cable management tray (sold separately) uses existing rack unit

Opt-X 500i, 1RU

Opt-X 500i, 2RU

Opt-X 500i, 3RU

Part #

5R1UL-F03

5R2UL-F06

5R3UL-F12

Fiber Listing Adapter Plates Splice Trays MTP Modules

72

144

288

3

6

12

3

6

12

3

6

12

$85.00

$110.00

$140.00

Major Credit Cards Accepted

Opt-X 500i, 1RU (5R1UL-F03)

Opt-X 500i, 2RU (5R2UL-F06)

Opt-X 500i, 3RU (5R3UL-F12)

Call for Volume Discounts

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

55

Opt-X 1000 Wall-Mount Fiber Optic Enclosures

- Self-healing grommet material protects cable and minimizes dust build-up

- Adjustable fiber management rings easily attach to mounting studs

- Ground terminal lug provides grounding option or cable strain relief

- Cutout on side of enclosure allows access to adapter bulkhead with open doors

- Door options: split with single lock on service side (optional lock available to install

on customer side), solid with or without single lock on customer side

- Constructed of 16-gauge steel, powder-coated black

A B C

Description

Small, empty, solid metal door, no lock

[A] Small, empty, split metal door and one lock/key

Small, empty, solid metal door and one lock/key

OPT-X 1000 Medium Wall-Mount Enclosures

Medium, empty, solid metal door, no lock

[B] Medium, empty, split metal door and one lock/key

Medium, empty, solid metal door and one lock/key

OPT-X 1000 Large Wall-Mount Enclosures

[C] Large, empty, solid metal door, no lock

Large, empty, split metal door and one lock/key

Large, empty, solid metal door and one lock/key

Accessories

Lock and Key

Adapter Plates

Maximum Capacity

Fibers (using LC) Adapter Plates Splice Trays MTP Modules

48

48

48

2

2

2

N/A

N/A

N/A

2

2

2

96

96

96

288

288

288

4

4

4

12

12

12

6

6

6

6

6

6

4

4

4

12

12

12

Key Features - Opt-X

- Unique design works w/ Leviton’s exclusive Opt-X series, including the

advanced Opt-X Ultra, Opt-X 1000i & Opt-X 500i enclosures

- Using Opt-X style plates or modules allows use of up to fifteen (15)

plates or modules (even quad LCs) in a 4RU enclosure

Part #

5W110-00N

5W120-00N

5W170-00N

5W310-00N

5W320-00N

5W370-00N

5W710-00N

5W720-00N

5W770-00N

5L000-L0K

$73.20

$90.55

$81.25

$99.85

$118.95

$113.95

$210.00

$222.95

$219.65

$11.35

Leviton Fiber Enclosures support two styles of Adapter Plates or MTP® Modules*;

Opt-X & LightSpace (LGX® footprint). Select the appropriate style for your enclosure.

SC

LC

3-pk duplex SC MM, (6-fiber) beige, phos bronze sleeve

3-pk duplex SC LOMM (6-fiber) aqua, zirc ceramic sleeve

3-pk duplex SC SM, (6-fiber) blue, zirc ceramic sleeve

3-pk duplex SC SM, (6-fiber) green, zirc ceramic sleeve

5F100-3BC $30.00

5F100-3AC $34.25

5F100-3ZC $34.25

5F100-3CA $34.25

6-pk duplex SC LOMM, (12-fiber) aqua, zirc ceramic sleeve 5F100-6AC $56.55

6-pk duplex SC SM (12-fiber) blue, zirc ceramic sleeve 5F100-6ZC $56.55

5F100-6CA $56.55

6-pk duplex SC SM (12-fiber) green, zirc ceramic sleeve

6-pk duplex LC MM, (12-fiber) beige, phos bronze sleeve 5F100-12P $55.60

6-pk duplex LC LOMM, (12-fiber) aqua, zirc ceramic sleeve 5F100-12A $55.75

6-pk duplex LC SM, (12-fiber) blue, zirc ceramic sleeve

6-pk quad LC MM, (24-fiber) beige, phos bronze sleeve

6-pk quad LC LOMM, (24-fiber) aqua, zirc ceramic sleeve

6-pk quad LC SM, (24-fiber) blue, zirc ceramic sleeve

ST

6-pk ST MM, (6-fiber) phos bronze sleeve

6-pk ST SM, (6-fiber) zirc ceramic sleeve

8-pk ST MM, (8-fiber) phos bronze sleeve

8-pk ST SM, (8-fiber) zirc ceramic sleeve

MTP

6-pk MTP (72-fiber), Method A and C (Key up/Key down)

6-pk MTP (72-fiber), Method B and C (Key up/Key up)

Blank Blank, metal

6-pk Quickport®, empty

5F100-12Z $65.00

5F100-24P $100.95

5F100-24A $100.95

5F100-24Z $100.95

5F100-1ST $26.65

5F100-6ZT $38.55

5F100-8ST $38.55

5F100-8ZT $32.60

5F100-6MP $91.65

5F100-6MB $91.65

5F100-BLK

5F100-6QP

$6.65

$9.95

Splice Trays

Key Features - Injection Molded Plastic Splice Trays

- 12-fiber mini and 24-fiber high density splice trays

- Accommodate 250 and/or 900 μm single-mode and multimode fibers

- Protect and manage heat shrink style spliced fibers

- Ratchet action clamps with foam rubber padding prevents damage to fibers

- Multiple tie down holes to secure incoming fiber

- Installable in Leviton Opt-X Series Fiber Enclosures

- 12-fiber splice tray installable in Leviton Network Interface Devices (NIDs)

12-Fiber Mini, 4” x 7” x 0.35”

12-Fiber Mini, w/standoff, 4” x 7” x 0.57”

12-Fiber Mini, 3.74” x 5.59” x 0.56” (14 Heat shrink splice sleeves included)

24-Fiber High Density, 4.5” x 7.63” x 0.50” (26 Heat shrink splice sleeves included)

T47HS-P06 $22.35

5T000-00T $28.05

T5PLS-12F $25.95

T5PLS-24F $43.40

Call for Volume Discounts

56

Datacomtools.com

TM

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

e2XHD Patching System

1RU and 4RU High Density Angled Panels

- Holds up to 48 fiber channels or 48 copper ports per rack unit

- Accepts up to 8 copper cassettes per RU

- Accepts up to 8 single height or 4 double height fiber cassettes per RU

- Mounts on standard 19” relay racks or cabinets

Application

10GbE

40GbE

100GbE e2XHD 1RU Panel Capacity with 24-fiber MTP Cabling

Max # of fibers

96

192

768

Max # of channels

48

24

32

The e2XHD Patching System provides simple termination & improved cable routing for both fiber & copper applications. The system includes 1RU & 4RU angled panels, copper & fiber snap-in cassettes, & accessories for additional cable protection & management. The e2XHD cassettes quickly snap in & pull out of the high density angled panel, making installation, moves, adds, & changes easier than ever. Copper cassettes are available either on pre-terminated trunks or with field-terminated connectors, & fiber cassettes are pre-terminated. Panel covers & blank cassettes offer extra protection from dust & damage.

- Panels allow mix-and-match of Leviton fiber and copper snap-in cassettes

- Adjustable MTP® adapter swivels, allowing for easy routing of incoming MTP cables

- Copper cassettes are available either on pre-terminated trunks or kitted with field-terminated eXtreme CAT 6A or CAT 6 connectors

- Copper connectors easily snap into cassette after termination

- Accessories include a rear cable manager that snaps directly into the panel, blank cassette inserts, & a top cover for angled panel, minimizing dust/debris e2XHD Copper Cassette Kit e2XHD Fiber Cassettes

MTP-LC 24-Fiber Core

Cassette

MTP-LC 12-Fiber Core

Cassette

1x24-Fiber to 3X8-Fiber

MTP-MTP Core Cassette

- Used exclusively with e2XHD High Density Angled Panels

- Supplied as a kit with cassette and six CAT 6A or CAT 6

QuickPort Connectors

- Connectors snap into cassette after termination

- AXT barrier reduces alien crosstalk between ports

- Cassettes are also available pre-terminated on

Leviton trunk cables

2X12-Fiber to 3X8-Fiber

MTP-MTP Edge Cassette e2XHD Patching System

Description e2XHD 1RU High Density Angled Panel e2XHD 4RU High Density Angled Panel e2XHD 6-port CAT 6A Cassette Kit* e2XHD 6-port CAT 6 Cassette Kit* e2XHD Copper Cassette, terminated to trunk cable e2XHD 24-fiber MTP®-LC Fiber Cassette e2XHD 12-fiber MTP-LC Fiber Cassette e2XHD MTP-MTP Fiber Cassette e2XHD MTP-MTP Pass-Through Cassette, four key-up/key-down adapters e2XHD MTP-MTP Pass-Through Cassette, four key-up/key-up adapters e2XHD Angled Panel Blank Insert e2XHD Rear Cable Manager, with cable management rings (four 1/4” rings) e2XHD Angled Panel Top and Bottom Cover

Universal Opt-X® Clamp Kit, single cable grommet (mounts to Rear Cable Manager)

Universal Opt-X Clamp Kit, multiple cable grommet (mounts to Rear Cable Manager)

Universal Clamp Kit, single and multiple cable grommet (for rack mounting)

* = CAT 6A Cassettes include six 6110G QuickPort® Connectors. CAT 6 Cassettes include six 61110 QuickPort Connectors xxx = connector colors: Black (BLK), Blue (BLU), Green (GRN), Yellow (YEL), Red (RED)

MTP-LC 24-Fiber Edge

Cassette, Rear

- Used exclusively with e2XHD High Density Angled Panels

- Allows for simple migration path to 40GbE or 100GbE networks with MTP® cassettes

- Leviton-designed MTP adapter swivel allows for easy cable routing and proper bending radius

- TIA Method B polarity installations require one core cassette for each edge cassette; White fiber

cassettes designate edge, and black designate core

Part No.

E2X1A-D48

E2X4A-192

E2X6A-xxx

E2X61-xxx

(see configuration below)

(see configuration below)

(see configuration below)

(see configuration below)

E2XHD-4MP

E2XHD-4MB

E2XHD-BLK

E2XHD-CMB

E2XHD-COV

5RCMP-KIT

5RCMP-KT2

5RCMR-KIT

MTP-MTP Pass-Through

Core Cassette

$131.89

$528.35

$73.75

$62.15

Call for pricing

Call for pricing

Call for pricing

Call for pricing

Call for pricing

Call for pricing

$3.80

$56.15

$28.75

$31.00

$39.80

$56.45

Part Number Configurator - e2XHD MTP Fiber Cassette

Example: FME2XHD-E012CKQDBC; 12-fiber OM3, LC (aqua color) to MTP connector, Method B (core) polarity

1 2 3 4 5 6 7

FME2XHD - X XXX X X X X XX

Major Credit Cards Accepted

1 Fiber Type

2 Fiber Count

E = OM3

012 - 12

3 Connector Type C = LC

4 Rear MTP Type K = 12F MTP

5 Adapter Color

6 FootPrint

7 Polarity

Q

D

= MM aqua adapter

= 12 Fiber

(single cassette height)

A = Method A

F = OM4

024 = 24

M = 8F MTP (female)

H = 24F MTP

A = OS2

L = SM blue adapter

E = 24 fiber

K = Black (MTP only)

(double cassette height)

BC = Method b, Core, black BE = Method B, Edge White

Call for Volume Discounts

57

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

MTP Solutions

100G to 10G Channel Configuration

Electronics LC Duplex Patch

Cord

100G to 40G Channel Configuration

Option A:

24-fiber MTP-LC

Module

24-fiber MTP Trunk Cable* 24-fiber MTP-LC

Module

LC Duplex Patch Cord Electronics

Electronics

Option B:

8-Fiber MTP Array Cord 24-fiber MTP to 3x8fiber MTP module

24-fiber MTP Trunk Cable* 24-fiber MTP to 3x8fiber MTP module

8-Fiber MTP Array

Cord

Electronics

Electronics

MTP Array Harness

MTP Adapter Plate 24-fiber MTP Trunk Cable* MTP Adapter Plate

100G to 10G Channel Configuration

MTP Array Harness Electronics

Electronics

Legacy 10G to 40G Migration

Option A:

24-fiber MTP Array Cord MTP Adapter Plate

24-fiber MTP Trunk Cable*

MTP Adapter Plate

24-fiber MTP Array Cord

Electronics

Electronics

Option B:

8-Fiber MTP Array Cord 2x 12-fiber MTP to

3x8-fiber MTP module

2x 12-fiber MTP Trunk Cable* 2x 12-fiber MTP to

3x8-fiber MTP module

8-Fiber MTP Array Cord Electronics

Electronics

2 x 12-fiber to 3x8 fiber MTP harness

MTP Adapter Plate

2x12-fiber MTP Trunk Cable*

MTP Adapter Plate 2 x 12-fiber to 3x8 fiber MTP harness

100G to 10G Channel Configuration

Electronics

Electronics 2x 12-fiber to 1x

24-fiber MTP Harness

MTP Adapter Plate

* = 24-fiber MTP Trunk Cables available in 24-, 48-, 72-, 96-, and 144-fiber count.

2x 12-fiber MTP Trunk Cable* MTP Adapter Plate

Call for Volume Discounts

58

Datacomtools.com

TM

2x 12-fiber to 1x

24-fiber MTP Harness

Electronics

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

MTP Trunk Cables

OPT-X Unity 40/100G Pre-Terminated Trunk Cables

- MTP to MTP trunk cables support 40/100G speeds

- Terminations available in 24-, 12-, and 8-fiber configurations

- Migration solution to 40/100G from existing 10G networks

with premium 12-fiber MTP trunk configuration

- Up to 70% faster install than field-terminated trunks

- All orders customized for cable type, length, staggering, fiber

count, and labeling

- 100% factory tested, w/test results included for each assembly

- All assemblies labeled with serial number and length for trace

ability and easy re-order

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

FT- X X XXX X X XXX X XX C XX C X - X X X X

1 Fiber Type

2 Cable Type (Dry Loose Tube)

3 Fiber Count (Strands)

4 1st End Terminations

5 Second End Termination

6 Cable Length

7 Unit of Measure

8 Breakout Length First End

9 Breakout Leg Type 1st end termination

10 Breakout Length second end

11 Breakout Leg Type 2nd end termination

12 Pulling Eye

13 Staggered First End Termination

14 Staggered Second End termination

15 Polarity

16 Labeling

E = 50/125μm Laser, Optimized (10G, 300m) MM (OM3)

A = Riser I/O

012

H = 24 F MTP (male)

H = 24 F MTP (male)

001-999

F = Feet

12-99 (Typ 36”)

C = 3 mm Jacketed Fiber

12-99” (Typ 36”)

B = Plenum I/O (Standard)

024

J = 24 F MTP (female)

J = 24 F MTP (female)

M = Meters

C = 3 mm Jacketed Fiber

Y = Yes

Y = Yes

Y = Yes

A = MTP Method A

S = Standard

N

N

N

B

C

= No

= No

= No

= MTP Method B (Standard)

= Custom

Call for Custom Quotes

F = 50/125 μm Laser Optimized MM (10G, 550m) OM4

C = Plenum Armor I/O

036

K = Premium 12 F MTP (M)

K = Premium 12 F MTP (M)

J = LSZH I/O

048 072

L = Premium 12 F MTP (F)

L = Premium 12 F MTP (F)

096

C = MTP Method C

144

OPT-X Unity 40/100G MTP Array Harnesses

- Pre-terminated MTP to MTP connectors in laser optimized

multimode

- Custom short length cable for cabinet/rack patching

- Custom staggering available

- Used in conjunction w/MTP brackets or adapter plates

- 100% factory tested, w/test results included for assemblies

- All assemblies labeled with serial number and length for

traceability and easy re-order

- For use in attaching directly to 40/100G transceivers

- Used in 12- or 24-fiber cabling systems

- Color coded boots

1 2 3 4 5 6 7 8 9

FH X H 024 X X X XX X X

1 Fiber Type

2 Cable Type

3 Fiber Count

4 First End Termination

5 Second End Termination

6 Cable Length (Feet)

7 Breakout Length (Inches)

8 Polarity

9 Location

E = 50/125 μm Laser Optimized (10G, 300m) MM

H = Harness

024

H = 24 F MTP (male)

H

3

A

C

= 24 F MTP (male)

0-48

=Type A

= Core

J = 24F MTP (female)

J = 24 F MTP (female)

5

XX

= Other

B = Type B

E = Edge

Call for Custom Quotes

F = 50/125 μm Laser Optimized MM (10G, 550m) OM4

K = Premium 12 F MTP (M)

K = Premium 12 F MTP (M)

6

C = Type C

L = Premium 12 F MTP (F)

M = Premium 8 F MTP (F)

8 X = Other

Pre-Terminated Trunk Cables

- Plug-n-play fiber eliminates the need for field terminations

or splices

- Up to 70% faster install than field-terminated trunks

- All orders customized for length, staggering, connector type,

breakout style, fiber count, and labeling

- Discrete connectors are heat-cured and use ceramic for

rules and sleeves for optimal performance

- Optional pulling eye protects connectors & eases installation

- Available in LC, MU, ST, SC, FC, MT-RJ, and MTP

- Industry-best turnaround time on delivery

- 100% factory tested, w/test results included for each assembly

- All assemblies labeled with serial number and length for trace

ability and easy re-order

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

FT - X X XXX X X XXX X XX X XX X X - X X X X

Call for Custom Quotes

1

2

3

4

5

6

7

8

9

Fiber Type

Cable Type

Fiber Count (Strands)

1st End Termination

2nd End Termination

Cable Length

Unit of measure

Breakout Length 1st end

Breakout Leg Types

1st end termination

A

A

A

F

= Single-mode (OS1)

= Riser I/O Dry Loose Tube

= ST B = SC C = LC (duplex

001-999

= Feet clips)

M = Meters

B = 50/125μm std

MM (OM2)

B = Plenum I/O Dry

Loose Tube (Standard)

C = 62.5/125μm MM

(OM1)

C = Plenum Armor I/O Dry

Loose Tube (Standard)

004 006 012 024 036 048

A = ST B = SC C = LC (duplex) D = FC E = SC/APC F =

LC/APC

D = FC E = SC/APC F =

LC/APC

072

G = FC/APC

G = FC/APC

E = 50/125μm Laser Optimized (10G, 300m

MM (OM3)

G = Riser Distribution

(Standard)

096

Q = MTRJ

(female)

Q = MT-RJ

(female)

144

R

(male)

R

= MTRJ

= MT-RJ

(male)

12-99 ” (Typ 36”)

A = 900μm buffered fiber (for SC, ST, LC, MU, FC, MT-RJ) B = 2mm jacketed fiber (for LC, MU, MT-RJ)

H = Plenum Distribution

XXX = Other

S = MTP

(female)

S = MTP

(female)

T

T

C

= MTP

(male)

= MTP

(male)

F = 50/125 μm Laser Optimized MM

(10G, 550m) (OM4)

J = LSZH I/O Dry

Loose Tube

U

U

= MU V = LC

(uniboot)

= MU V = LC

(uniboot)

K = LSZH Distribution

X

Z

= Other

=

Pigtail

X =

Other

= 3mm jacketed fiber (for SC, ST, LC, FC, MT-RJ,

MTP)

10 Breakout Length 2nd end

11 Breakout Leg Types

2nd end termination

12 Pulling

13 Staggered 1st End Termination Y = Yes

14 Staggered 2nd End Termination Y = Yes

15 Polarity

16 Labeling

12-99”

A

Y

= Yes

A

(Typ 36”)

= 900μm buffered fiber (for SC, ST, LC, MU, FC, MT-RJ) B = 2mm jacketed fiber (for LC, MU, MT-RJ)

= MTP Method A

S = Standard

N

N

N

C

= No

= No

= No

= Custom

B = MTP Method C

C = 3mm jacketed fiber (for SC, ST, LC, FC, MT-RJ,

MTP)

C = Method B

Call for Volume Discounts

59

Major Credit Cards Accepted

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

12-Fiber MTP Modules

Call for Custom Quotes

- Available in Opt-X & LightSpace (LGX footprint) styles

- Plug-n-play module eliminates need for field termination

or splices

- Each module supports up to 24 fibers (LC)

- Bend-insensitive fiber used in OM3/OM4 modules

- All 12-fiber MTP modules use low-loss MTP connectors

- Low insertion loss of 0.5 dB maximum

- 100% factory tested with test results included with

each module

- See specific enclosure pages for MTP module capacity

- Available with shutters by special order

1 2 3 4 5 6 7

FM - X XXX X X X X X

1 Fiber Type

2 Fiber Count

3 Connector Type

4 MTP Fiber Count

5 Footprint

A = Single-mode (OS1) B = 50/125 μm MM (OM2) C = 62.5/125 μm MM (OM1) E = 50/125 μm Laser Optimized

(10G, 300m) MM (OM3)

F = 50/125 μm Laser Optimized MM (10G, 550m) (OM4)

012

B = SC

024

C = LC

A = 12

A

= Light-Space® (LGX® footprint)

D

C

= LC (w/ shutters)

= Opt-X

U = MU

6 Color 0 = Black (standard) 2 = Beige

7 Polarity A = MTP Method A B = MTP Method B C = MTP Method C (standard)

OPT-X Unity 40/100G MTP Modules

- Available in Opt-X style footprint

- Allows easy migration from 10G to 40G or 100G

- Each module supports up to 48 fibers using MTP, or 24

fibers using LC

- Modules use either 24 or 12-fiber low-loss connectors

Opt -x® unity 40/100G MTP Modules, common configurations

Description

MTP Core Module, 24-fiber, 24F MTP-LC, Method B, black latches

MTP Edge Module, 24-fiber, 24F MTP-LC, Method B, white latches

MTP-MTP Module, 24-fiber, 24F MTP-3x8F MTP, Method B

MTP-MTP Module, 48-fiber, 2x24F MTP-6X8F MTP, Method B

MTP-MTP Module, 24-fiber, 2x12F MTP-3x8F MTP, Method B

* = Fiber type: OM3 (E), OM4 (F).

- Bend-insensitive fiber used in OM3/OM4 modules

- MTP-MTP modules are used with MTP array cords

- See specific enclosure pages for MTP module capacity

- Latches are color coded: black = core, white = edge

Part #

FM -*024CDC0BC

FM -*024CDC0BE

FM -*024NDC0E

FM -*048NDC0B

FM -*024NCC0B

Call for pricing

Call for pricing

Call for pricing

Call for pricing

Call for pricing

Pre-Terminated Copper Trunks

- Custom configured for length, connector type, & more

- Fast and easy installation with reduced labor costs

- 100% factory tested, with test results available

- CAT 6A trunks all use Leviton’s component-rated

connectors, which provide guaranteed performance in

short lengths

- UTP connectors utilize Leviton’s patented Retention

Force Technology (RFT) for consistent system reliability

- Plugs feature clear SlimLine design with snagless strain

relief boot

- Terminated ends offered in staggered or even cut

- Customized breakout length from braided sleeve

improves installation flexibility and appearance

- Each assembly receives an individualized serial

number, & individual cables are numbered relative

to that serial number

- Pre-terminated assemblies are eligible for Leviton’s

limited lifetime product, system, and performance

warranties

- Breakout distances can be even or staggered

Call for Custom Quotes

1 2 3 4 5 6 7 8 9 10 11 12 13

CT - XXXX 06 L XXXX - X E X XX X - X E X XX X - X S03

Example: CT-U6P06L050F-JEC36Y-PEF36Y-SS03; CAT 6 plenum cable assembly, 50-foot length, jack to plug terminations, staggered black jacks w/a 36-inch breakout, staggered plugs w/a 36-inch breakout, bundle of 6 blue cables encased in a plenum braided mesh sleeve w/pulling eye on each end.

1 Cable Type

2 # of Cables

3 Cable Color

4 Cable Length

5 Term (1st end)

6 Alignment (1st end)

7 Breakout Length (1st end) 12-99 ”

8 Pulling Eye (1st end)

9 Term (2nd end) J

U6AP = CAT

6A UTP CMP

06

L = Blue

50-295

J

C

Y

= Jack

Feet

U6AR

3-90

= CAT

6A UTP CMR

P

Meter

= Plug

= Staggered E = Even

= Yes

= Jack

N = No

P = Plug

10 Alignment (2nd end) F = Staggered E = Even

11 Breakout Length (2nd end) 12-99 ”

12 Labeling S = Standard C = Custom

U6P = CAT 6

UTP CMP

O = Open

U6R = CAT 6

UTP CMR

U5eP = CAT 5e

UTP CMP

U5eR = CAT

5e UTP CMR

Call for Volume Discounts

60

Datacomtools.com

TM

Performance

CAT 5e, UTP

CAT 6, UTP

CAT 6A, UTP

CAT 6A, AXi UTP

CAT 5e, Shielded

CAT 6, Shielded

CAT 6A, Shielded

Jack to

Jack

Jack to

Plug

Plug to

Plug

Jack to

Open

Plug to

Open

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

CAT 6 Patch Panels

Universal panels feature 6-port RJ45 modules on the front, industry standard 110-style punchdown on the rear, & T568A/B universal wiring configurations. QuickPort Patch Panels are pre-loaded with black eXtreme 6+ connectors. 48-Port, angled design provides improved access to 110 punchdown fields, & increased density with enhanced patch cord transition to vertical cable management. For high density applications choose eXtreme 6+ 1RU 48-Port Patch Panels. This patch panel doubles density in applications where space is at a premium. Robust design, die-cast aluminum construction, & the included sturdy cable management bar support increased cable loads.

eXtreme 6+ Universal Panel, 110, w/ Cable mgmt bar

69586-U12 12-Port CAT 6 Patch Panel

69586-U24

24-Port CAT 6 Patch Panel

69586-U48 48-Port CAT 6 Patch Panel

69586-C48 Central Label 48-Port Panel

69586-U96 96-Port CAT 6 Patch Panel

69587-U48 48 Port Angled Universal Patch Panel, 2RU

Angled Patch Panel Accessories

49254-LPM Angled Horizontal Patch Cord Organizer, 1RU

49254-BCM Angled Horizontal Patch Cord Organizer, 2RU

49254-BA2

Front Blank Angled Panel, 2RU

49254-BA1 Front Blank Angled Panel, 1RU

49006-AMB Angled Cable Management Bar, rear

(4 hook and loop fasteners included)

49254-BC1 Transitional Cover

$99.80

$154.95

$299.00

$365.00

$727.00

$455.00

$60.15

$85.00

$54.10

$52.55

$44.95

$54.85

QuickPort Panel pre-loaded w/eXtreme 6+ Connectors w/cable mgmt bar

69270-U24

69270-U48

QuickPort High Density Panel, 1RU, w/cable mgmt bar

69270-D48

69586-U89

61110-R*6

61110-B*6

24-Port CAT 6 Patch Panel

48-Port CAT 6 Patch Panel

48-Port CAT 6 Patch Panel

Patch Blocks and Connectors eXtreme 6+ Universal Patch Block, 12-Port eXtreme 6+ Component-rated connector eXtreme 6+ component-rated connectors

QuickPack (25 per pack)

$210.00

$410.00

$503.00

$95.00

$6.25

$149.00

Recessed Angled Patch Panels

Leviton’s Recessed Angled Patch Panels are ideal for cabinet applications that require a low profile panel. The unique dual-angled design provides improved punchdown accessibility, the option to increase density, and enhanced patch cord transition to vertical cable management.

Recessed Angled Panel Accessories keep installation organized and ready for future expansion.

4W254-LPM 4W006-AMB

Recessed Angled Patch Panel Accessories

4W254-LPM Recessed Angled Patch Cord Organizer, 1RU $155.00

4W254-BCM Recessed Angled Patch Cord Organizer, 2RU $124.85

4W254-BA1

4W254-BA2

4W006-AMB Recessed Angled Cable Management Bar, Rear $48.10

49262-HR1

4W254-BC1

Front Blank Recessed Angled panel, 1RU

Front Blank Recessed Angled Panel, 2RU

Vertical Transition Rings, 2/Box

Transitional Cover

$55.55

$95.00

$6.95

$61.35

QuickPort Multimedia Patch Panels

48-Port Recessed angled patch panel, universal, 110 style, 2RU

6W587-U48

5W597-U48

CAT 6 Patch Panel

CAT 5E Patch Panel

$470.00

$299.00

Recessed Angled Patch Panels - QuickPort® Unloaded

4W256-D72

4W256-H48

4W256-H24

High-Density 72-Port - Sold Empty, 2RU

QuickPort 48-Port, Sold Empty, 2RU

QuickPort 24-Port, Sold Empty, 1RU

$195.20

$120.00

$99.70

Gigamax Universal Patch Panel

Create a Category 5, 5e, 6, or 6A multimedia panel instantly by matching

Leviton connectors with QuickPort patch panels and patch blocks. Install

QuickPort voice, data, audio, and video modules to configure the panel to your exact needs.

Patch blocks hold 12 QuickPort modules. Patch panels contain 24, 48, or

72 ports. An 89D mounting bracket is sold separately for patch blocks.

49255-H48 48-Port Panel w/Wire Management Bar, 2RU $77.95

49255-H24 24-Port Panel w/Wire Management Bar, 1RU $57.10

49255-Q32 32-Port Panel with Cable Tray, 2RU

49255-Q24 24-Port Panel with Cable Tray, 2RU

4W256-H48 QuickPort Recessed Angled Panel, 48-Port

4W256-H24 QuickPort Recessed Angled Panel, 24-Port

$67.25

$60.70

$120.00

$99.70

Major Credit Cards Accepted

Leviton’s GigaMax 5e Patch Panels and Patch Blocks are ideal for modular cross connection and available in a multitide of port densities to meet the needs of high-speed data applications.

The patch panel shall meet or exceed the requirements for Category 5e described in TIA/EIA-568-B as well as the Class E requirements described in ISO/IEC 11801-B. The panels shall feature both T568A and T568B wiring configurations, white IDC 110-punchdown modules, mounting standoffs for cable management bars, color-coded front window labeling, and a termination standoff for patch panel earthing/grounding.

GigaMax 5e Universal Patch Panel w/cable Management Bar

5G596-U12

5G596-U24

5G596-U48

5G596-C48

5G596-U96

12-Port CAT 5e Patch Panel

24-Port CAT 5e Patch Panel

48-Port CAT 5e Patch Panel

Central Label 48-Port CAT 5e Patch Panel

96-Port CAT 5e Patch Panel

$93.05

$132.00

$270.00

$270.00

$510.00

Call for Volume Discounts

61

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

QuickPort UTP & STP Connectors

Colors Available:

Leviton offers a wide variety of copper connectors from CAT 6A (10G) to CAT 3 solutions. CAT 6A eXtreme 10G, our highest performance connector, featuring the Cone of Silence and Retention Force Technology (RFT) resist alien crosstalk (AXT) between neighboring connectors, & offers unparalleled signal integrity. eXtreme 6+ and

GigaMax 5e+ component-rated connectors also feature patented RFT for long term performance.

6110G-R*6

61110-R*6

61110-B*6

5G110-R*5

5G110-B*5

5G108-R*5

5G108-B*5 eXtreme 10G Channel-Rated Connector eXtreme 6+ Component-Rated Connector eXtreme 6+ Component-Rated Connectors QuickPack® (25 per pack)

GigaMax® 5e+ Component-Rated Connector

GigaMax® 5e+ Component-Rated Connector QuickPack® (25 per pack)

GigaMax® 5e Channel-Rated Connector

GigaMax® 5e Channel-Rated Connectors QuickPack® (25 per pack)

$10.85

$6.25

$149.00

$4.50

$104.45

$3.75

$85.00

JackRapid Punchdown Tool

JackRapid termination tool is a unique, patented jack termination tool that saves time and increases accuracy by seating and terminating all wires at once with a simple squeeze of an ergonomic handle. Jack-Rapid gives clean, consistent and accurate cuts every time.

JR-LEV-1

JR-LEV-1-H

JR-LEV-2

JR-LEV-2-H

JR-SYS-2

JR-SYS-2-H

JR-ORT-2

JR-ORT-2-H

JR-ADC-2

JR-ADC-2-H

JR-PAN-2

JR-PAN-2-H

JackRapid (Leviton, 41106, 41108, 5G108)

Replacement blade (Leviton, 41106, 41108, 5G108)

JR-SYS-UNI-1 JackRapid (Systimax MPS100E, C5, M1BH, UNJ600/500/300)

JR-SYS-UNI-1-H Replacement blade (Systimax MPS100E, C5, M1BH, UNJ600/500/300)

JackRapid (Leviton 61110, 5G110, 6110G)

Replacement blade (Leviton 61110, 5G110, 6110G)

JackRapid (Systimax MGS400, MGS500, MFP420, MFP520)

Replacement blade (Systimax MGS400, MGS500, MFP420, MFP520)

JackRapid (Ortronics TJ5E00, TJ600, TJ610)

Replacement blade (Ortronics TJ5E00, TJ600, TJ610)

JackRapid Termination Tool (for ADC KM8, CopperTen)

JackRapid Replacement Blade Head (for ADC KM8, CopperTen)

JackRapid Termination Tool (for Panduit NK688M and NKP5E88M)

JackRapid Replacement Blade Head (for Panduit NK688M & NKP5E88M)

$81.00

$58.00

$81.00

$58.00

$81.00

$58.00

$81.00

$58.00

$81.00

$58.00

$81.00

$58.00

$81.00

$58.00

QuickPort Audio/Video Connectors

62

* RCA-110 connector inner barrel color

- Orange, Red, White, Yellow, (Green & Blue available in Ivory & White Only)

QuickPort Wallplates

- BNC QuickPort Adapters: F to F connector w/twist-on front/rear connections

- F-Type QuickPort Adapters: F to F connector w/screw-on front/rear connections

- QuickPort Blank Inserts: Fill unused QuickPort Openings

- S-Video/110 Quickport Connectors: S-Video connector on the front with 110 punchdown on the rear

- RCA QuickPort Adapters: Connectors w/pass through design for audio/video and home theater applications.

- RCA-110 QuickPort Connectors: Standard RCA connector on the front with 110 punchdown on the rear

BNC, Nickel Plated 41084-BIF 41084-BWF 41084-BAF 41084-BTF

4084-BEF

4084-BGF $4.47

BNC, Gold Plated 40832-OBI 40832-OBW 40832-OBA 40832-OBT

-

$4.75

F-Type, Nickel Plated 41084-FIF 41084-FWF 41084-FAF 41084-FTF

41084-FEF

41084-FGF $1.78

F-Type, Gold Plated 40831-OBI 40831-OBW 40831-OBA 40831-OBT

-

$2.75

S-Video Connector 40734-SVI 40734-SVW 40734-SVA 40734-SVT

40734-SVE

40734-SVG $7.65

Blank Insert (10) 41084-BIB 41084-BWB 41084-BAB 40184-BTB

40184-BEB

40184-BGB $0.17

RCA, w/Black Stripe 40830-BIE 40830-BWE 40830-BAE 40830-BTE

RCA, w/Red Stripe 40830-BIR 40830-BWR 40830-BAR 40830-BTR

RCA, w/Yellow Stripe 40830-BIY 40830-BWY 40830-BAY 40830-BTY

RCA, w/Green Stripe 40830-BIV 40830-BWV

RCA, w/Blue Stripe 40830-BIL 40830-BWL

-

-

-

-

-

-

-

-

-

-

-

-

-

$3.25

$3.25

$3.25

$3.25

$3.25

RCA-110 Connector 40735-R*I 40735-R*W 40735-R*A 40735-R*T

40735-R*E

40735-R*G $5.85

HDMI & DVI Connectors

3.5mm Stereo Connector 40839-SWS 40839-SIS $6.25

Wallplates offer field-configurable flexibility in a single piece housing. Compatible with all QuickPort Modules.

QuickPort Decora Wallplate inserts match Leviton Decora electrical switches and outlets. QuickPort Modules fit neatly into a single-gang Decora wallplate & can combine with electrical devices in a multi-gang wallplate.

41080-6*P

41080-4*P

41080-3*P

41080-2*P

41080-1*P

41646-0**

41644-0**

41643-0**

41612-0**

6-Port QuickPort Single-Gang Wallplate

4-Port QuickPort Single-Gang Wallplate

3-Port QuickPort Single-Gang Wallplate

2-Port QuickPort Single-Gang Wallplate

1-Port QuickPort Single-Gang Wallplate

QuickPort Decora Multimedia, 6-Port Insert

QuickPort Decora Multimedia, 4-Port Insert

QuickPort Decora Multimedia, 3-Port Insert

QuickPort Decora Multimedia, 2-Port Insert

$1.45

$1.45

$1.45

$1.45

$1.45

$3.30

$3.30

$3.30

$3.30

Call for Volume Discounts

Datacomtools.com

TM

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

Opticom QuickNet Rack Mount Fiber Cassette Enclosures

- Mount to standard EIA 19” rack rails

- Suitable for all pre-terminated, field terminated, or field-splice applications

- Up to four cassettes or FAPs per rack unit for maximum patch field density

- Slide-out, tilt-down drawer provides full front access to all fibers and cables

- Integral bend radius control and cable management for fiber optic patch cords

- Innovative rear cable management for proper slacking/spooling of trunk cable break-outs interconnect cables

- Include fiber optic cable routing kit (grommets, cable ties, spools, strain relief bracket, and ID/caution

labels) for various cable management solutions

Part # Part Description

FCE1U

FCE1UA Open access. Holds up to 4 QuickNet Cassettes, FAP adapter panels, or

FOSM splice modules: 1.73”H x 17.60”W x 16.30”D

FCE2U

Holds up to four QuickNet™ Cassettes, FAP adapter panels, or FOSM splice modules: 1.73”H x 17.60”W x 16.30”D

FCE4U

Holds up to eight QuickNet™ Cassettes, FAP adapter panels, or FOSM splice modules: 3.48”H x 17.60”W x 16.30”D

Holds up to twelve QuickNet™ Cassettes, FAP adapter panels, or FOSM splice modules: 6.98”H x 17.60”W x 16.30”D

^One rack space = 1.75” (44.5mm).

# of Rack

Spaces^

1

Std. Pkg.

Qty.

1

1

2

4

1

1

1

$214.95

$214.95

$256.55

$345.00

Opticom Rack Mount Fiber Enclosures

- Mount to standard EIA 19” rack rails

- Suitable for all pre-terminated, field terminated, or field-splice applications

- Up to four cassettes or FAPs per rack unit for maximum patch field density

- Slide-out, tilt-down drawer provides full front access to all fibers and cables

- Integral bend radius control and cable management for fiber optic patch cords

- Rear cable management for proper slacking/spooling of trunk cable break-outs & interconnect cables

- Include fiber optic cable routing kit (grommets, cable ties, spools, strain relief bracket, and ID/caution labels)

for various cable management solutions

Part # Part Description

FRME1U Up to 3 FAP/FMP adapter panels or FOSM splice modules. Bidirectional sliding drawers provides front/rear access to fibers: 1.74”H x 17.00”W x 14.20”D

FRME2U Up to 6 FAP/FMP adapter panels or FOSM splice modules. Bidirectional sliding drawers provides front/rear access to fibers: 3.48”H x 17.00”W x 14.20”D

FRME3 Up to 9 FAP/FMP adapter panels. Fixed bulkhead design: 5.00”H x 17.16”W x 11.80”D

FRME4 Up to 12 FAP or FMP adapter panels. Fixed bulkhead design: 6.62”H x

17.16”W x 11.80”D

# of Rack

Spaces^

1

Std. Pkg.

Qty.

1

2

3

4

1

1

1

$181.65

$225.00

$249.65

$285.00

^One rack space = 1.75” (44.45mm). Optional locks available for rack mount enclosures. All product color is black.

Opticom Rack Mount Fiber Trays & Patch Panels

FCE1U

FCE4U

FRME1U

FRME3

FCE2U

FRME2U

FRME4

- Mount to standard EIA 19” rack rails

- Standard front or angled front options

- Use with Opticom Fiber Adapter Patch Panels (below) to protect fibers and terminations

- Can be used as a back box for select Mini-Com Patch Panels

- Removable top cover provides access to connections, fibers, and slack storage in rear of tray

- Include fiber optic cable routing kit (grommets, cable ties, spools, strain relief bracket and ID/caution labels)

for various cable management solutions

Part # Part Description

Standard Fiber Mount Trays

FMT1 Mount w/CFAPPBL1 fiber adapter patch panel to hold up to 4 QuickNet

Cassettes, FAP, and FMP adapter panels: 1.75”H x 17.16”W X 11.16”D

FMT2 Mount w/CFAPPBL2 fiber adapter patch panel to hold up to 8 QuickNet

Cassettes, FAP, or FMP panels. Dimensions: 3.48”H x 17.16”W x 11.16”D

Standard Fiber Adapter Patch Panels

CFAPPBL1 Flat fiber patch panel. Holds up to four FAP or FMP adapter panels.

CFAPPBL2 Flat fiber patch panel. Holds up to eight FAP or FMP adapter panels.

Angled Fiber Mount Trays

FMT1A

FMT2A

Mount w/CFAPPBL1A angled fiber adapter patch panel to hold up to 4 FAP or FMP adapter panels. Dimensions: 1.75”H x 17.16”W X 11.16”D

Mount w/CFAPPBL2A angled fiber adapter patch panel to hold up to 8

FAP or FMP adapter panels. Dimensions: 3.48”H x 17.16”W x 11.16”D

Angled Fiber Adapter Patch Panels

CFAPPBL1A Angled fiber patch panel. Holds up to four FAP or FMP adapter panels.

CFAPPBL2A Angled fiber patch panel. Holds up to eight FAP or FMP adapter panels.

# of Rack

Spaces^

Std. Pkg.

Qty.

1

2

1

2

1

2

1

2

1

1

1

1

1

1

1

1

$109.65

$123.75

$21.10

$26.45

$130.25

$145.60

$38.40

$48.15

^One rack space = 1.75” (44.45mm). All product color is black.

Major Credit Cards Accepted

FMT1

FMT1A

CFAPPBL1

FMT2

FMT2A

CFAPPBL2

CFAPPBL1A CFAPPBL2A

Call for Volume Discounts

63

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

64

QuickNet Patch Panels and Accessories

QAPP24BL

- Accept QuickNet Copper Cable Assemblies & QuickNet SFQ Series MTP* Fiber Optic Cassettes which snap in

and out with one hand

- High-density patch panels conserve valuable rack space

- Angled patch panels facilitate proper bend radius control & minimize the need for horizontal cable managers

- All metal patch panels accept shielded cassettes, no additional grounding kit required

- Pre-printed numbers above each port for easy identification

- Mount to standard EIA 19” racks or 23” racks with optional extender brackets

- Label/label cover kit (QPPLC24) provides port and panel identification for 24-port patch panels

QAPP48HDBL

QPP24BL

QPP48HDBL

QPPABL

QPPBBL

Part # Part Description

QuickNet ™ Angled Patch Panels

QAPP24BL 24-port angled patch panel. Accepts QuickNet Pre-Terminated Cassettes and Patch Panel Adapters.

QAPP48HDBL 48-port angled patch panel. Accepts QuickNet Pre-Terminated Cassettes & Patch Panel Adapters.

QAPP48HDVNSBL 48-port angled patch panel. Accepts QuickNet Pre-Terminated Cassettes & Patch Panel Adapters. Numbering sequence is top to bottom.

QuickNet ™ Flat Patch Panels

QPP24BL 24-port patch panel. Accepts QuickNet Pre-Terminated Cassettes &

Patch Panel Adapters.

QPP48HDBL 48-port patch panel. Accepts QuickNet Pre-Terminated Cassettes &

Patch Panel Adapters.

QPP48HDVNSBL 48-port patch panel. Accepts QuickNet Pre-Terminated Cassettes &

Patch Panel Adapters. Numbering sequence is top to bottom.

Patch Panel Adapter

QPPABL QuickNet ™ Patch Panel Adapter which accepts Mini-Com ® Modules for UTP, fiber optic, and audio/visual applications.

Patch Panel Blank

QPPBBL

QPPLC24

QuickNet ™ Patch Panel Blank reserves space for future use and promotes proper airflow and cooling.

Patch Panel Label Kit

Label/label cover kit for 24-port QuickNet ™ Patch Panels. Each kit contains four labels and four clear label covers per bag.

Rack

Spaces^

1

1

1

1

1

1

Pkg.

Qty.

Ctn.

Qty.

1

1

1

1

1

1

1

1

1

10

10

10

10

10

10

10

10

10

$62.05

$151.30

$151.30

$32.60

$88.15

$88.15

$4.55

$4.45

$5.25

*MTP is a registered trademark of US Conec Ltd. ^One rack space = 1.75” (44.45mm). M6 and #12-24 mounting screws included.

Opticom Wall Mount Enclosures

FWME2

FWME8

- Holds Opticom Fiber Adapter Panels (FAPs)

- Rugged all metal construction for fiber protection and secure mounting

- Separate doors for service side and user side with optional keyed locks for added security

- Include fiber optic cable routing kit (grommets, cable ties, spools, strain relief bracket and ID/caution labels) for

various cable management solutions

Part # Part Description

Fiber Wall Mount Enclosures

FWME2 Holds up to 2 QuickNet™ Cassettes, FAP, or FMP panels: 12.00”W x 10.18”H x 2.32”D

FWME4 Holds up to 4 QuickNet™ Cassettes, FAP, or FMP panels: 16.11”W x 12.25”H x 3.52”D

FWME8 Holds up to 8 QuickNet™ Cassettes, FAP, or FMP panels: 16.11”W x 16.11”H x 5.00”D

Fiber Accessories

FELS

FELU

Fiber enclosure lock for service side.

Fiber enclosure lock for user side.

All product color is black. *MTP is a registered trademark of US Conec Ltd.

Pkg. Qty.

1

1

1

1

1

$60.60

$135.45

$157.45

$9.75

$9.75

Opticom MPO Fiber Optic Adapter Panels (FAPs)

FAPH0412BLMPO FAPH0612BLMPO

- Loaded with TIA/EIA-604 FOCIS-5 compliant adapters

- Exceed TIA/EIA-568-C.3 requirements

- Screen printed for horizontal or vertical orientation

- Designed for multimode or singlemode MPO connectors, patch cords, or cable assemblies

- Snap quickly into the front of all Opticom and Opticom QuickNet Components

- Can be used with Opticom Zero RU Cable Management Solutions and QuickNet Hydra Cable Assemblies to

facilitate connection to the active equipment

FAPH0812BLMPO

FAPH1212BLMPO

Part Number

FAPH0412BLMPO

FAPH0612BLMPO

FAPH0812BLMPO

Part Description

Opticom MPO FAP loaded w/(4) key-up/key-up MPO fiber adapters; oriented horizontally

Opticom MPO FAP loaded w/(6) key-up/key-up MPO fiber adapters; oriented horizontally

Opticom MPO FAP loaded w/(8) key-up/key-up MPO fiber adapters; oriented horizontally

$133.35

$200.00

$265.00

FAPH1212BLMPO Opticom MPO FAP loaded w/(12) key-up/key-up MPO fiber adapters; oriented horizontally $400.00

FAPH1612BLMPO Opticom MPO FAP loaded w/(16) key-up/key-up MPO fiber adapters; oriented horizontally $535.00

FAPH1812BLMPO Opticom MPO FAP loaded w/(18) key-up/key-up MPO fiber adapters; oriented horizontally $600.00

FAPV0412BLMPO Opticom MPO FAP loaded w/(4) key-up/key-up MPO fiber adapters; oriented vertically

FAPV0612BLMPO Opticom MPO FAP loaded w/(6) key-up/key-up MPO fiber adapters; oriented vertically

FAPV0812BLMPO Opticom MPO FAP loaded w/(8) key-up/key-up MPO fiber adapters; oriented vertically

$133.35

$200.00

$265.00

Call for Volume Discounts

Datacomtools.com

TM

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

LC Opticom Fiber Adapter Panels (FAPs)

- Loaded with TIA/EIA-604 FOCIS-10 compatible adapters

- Exceed TIA/EIA-568-B.3 requirements

- Snap quickly into the front of all Opticom components

- LC fiber adapter panels are Sr./Jr. to conserve enclosure space

- Accept FOCIS-10 compatible senior LC connectors at either end and FOCIS-10 junior LC connectors at the

inside end for behind the wall applications

- Both ends accept FOCIS-10 compatible senior LC connectors

- Junior end also accepts FOCIS-10 compatible junior (fixed ferrule/springless) LC connectors

- Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia

ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications

- Every adapter is laser marked with Q.C. number to assure 100% traceability

Part # Part Description

LC Fiber Adapter Panels – 10Gig OM3/OM4 50/125μm (Aqua Adapters)

FAP6WAQDLCZ

FAP6WAQDLC

FAP8WAQDLCZ

FAP8WAQDLC

FAP12WAQDLCZ

FAP12WAQDLC

LC 10Gig FAP loaded w/6 LC 10Gig™ Duplex MM Fiber Adapters (Aqua) w/zirconia ceramic split sleeves.

LC 10Gig FAP loaded w/6 LC 10Gig™ Duplex MM Fiber Adapters (Aqua) w/phosphor bronze split sleeves.

LC 10Gig FAP loaded w/8 LC 10Gig™ Duplex MM Fiber Adapters (Aqua) w/zirconia ceramic split sleeves.

LC 10Gig FAP loaded w/8 LC 10Gig™ Duplex MM Fiber Adapters (Aqua) w/phosphor bronze split sleeves.

LC 10Gig FAP loaded w/12 LC 10Gig™ Duplex MM Fiber Adapters (Aqua) w/zirconia ceramic split sleeves.

LC 10Gig FAP loaded w/12 LC 10Gig™ Duplex MM Fiber Adapters (Aqua) w/phosphor bronze split sleeves.

LC Fiber Adapter Panels – OM2 50/125μm (Black Adapters)

FAP6WBLDLC

FAP8WBLDLC

FAP12WBLDLC

LC FAP loaded w/6 LC duplex MM fiber adapters (Black) w/phosphor bronze split sleeves.

LC FAP loaded w/8 LC duplex MM fiber adapters (Black) w/phosphor bronze split sleeves.

LC FAP loaded w/12 LC duplex MM fiber adapters (Black) w/phosphor bronze split sleeves.

LC Fiber Adapter Panels – OM1 62.5/125μm (Electric Ivory Adapters)

FAP6WEIDLC

FAP8WEIDLC

LC FAP loaded w/6 LC duplex MM fiber adapters (Electric Ivory) w/phosphor bronze split sleeves.

LC FAP loaded w/8 LC duplex MM fiber adapters (Electric Ivory) w/phosphor bronze split sleeves.

FAP12WEIDLC LC FAP loaded w/12 LC duplex MM fiber adapters (Electric Ivory) w/phosphor bronze split sleeves.

LC Fiber Adapter Panels – OS1/OS2 9/125μm (Blue Adapters)

FAP12WBULCZ

FAP6WBUDLCZ

FAP8WBUDLCZ

FAP12WBUDLCZ

LC FAP loaded w/12 LC simplex SM fiber adapters (Blue) w/zirconia ceramic split sleeves.

LC FAP loaded w/6 LC duplex SM fiber adapters (Blue) w/zirconia ceramic split sleeves.

LC FAP loaded w/8 LC duplex SM fiber adapters (Blue) w/zirconia ceramic split sleeves.

LC FAP loaded w/12 LC duplex SM fiber adapters (Blue) w/zirconia ceramic split sleeves.

$87.45

$68.35

$171.09

$94.80

$121.25

$133.95

$71.10

$94.80

$133.80

$71.10

$94.80

$133.80

$171.10

$87.60

$121.25

$171.10

SC Opticom Fiber Adapter Panels (FAPs)

- Loaded with TIA/EIA-604 FOCIS-3 compliant adapters

- Exceed TIA/EIA-568-C.3 requirements

- Snap quickly into the front of all Opticom components

- Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia

ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications

- Q.C. number and split sleeve material laser marked on every adapter assures 100% traceability and quick

and easy identification of split sleeve material

Part # Part Description

SC Fiber Adapter Panels – 10Gig OM3/OM4 50/125μm (Aqua Adapters)

FAP6WAQSCZ SC 10Gig FAP loaded w/6 SC 10Gig Simplex MM Fiber Adapters (Aqua) w/zirconia ceramic split sleeves.

FAP6WAQDSCZ SC 10Gig FAP loaded w/6 SC 10Gig Duplex MM Fiber Adapters (Aqua) w/zirconia ceramic split sleeves.

FAP6WAQDSC SC 10Gig FAP loaded w/6 SC 10Gig™ Duplex MM Fiber Adapters (Aqua) w/phosphor bronze split sleeves.

SC Fiber Adapter Panels – OM2 50/125μm (Black Adapters)

FAP6WBLSC SC FAP loaded w/6 SC simplex MM fiber adapters (Black) w/phosphor bronze split sleeves.

FAP12WBLSC SC FAP loaded w/12 SC simplex MM fiber adapters (Black) w/phosphor bronze split sleeves.

FAP6WBLDSC SC FAP loaded w/6 SC duplex MM fiber adapters (Black) w/phosphor bronze split sleeves.

SC Fiber Adapter Panels – OM1 62.5/125μm (Electric Ivory Adapters)

FAP6WEISC

FAP12WEISC

SC FAP loaded w/6 SC simplex MM fiber adapters (Electric Ivory) w/phosphor bronze split sleeves.

SC FAP loaded w/12 SC simplex MM fiber adapters (Electric Ivory) w/phosphor bronze split sleeves.

$38.10

$66.75

$67.15

$38.10

$66.75

FAP3WEIDSC SC FAP loaded w/three SC duplex multimode fiber optic adapters (Electric Ivory) with phosphor bronze split sleeves.

$37.25

FAP6WEIDSC SC FAP loaded with six SC duplex multimode fiber optic adapters (Electric Ivory) with phosphor bronze split sleeves.

$67.15

SC Fiber Adapter Panels – OS1/OS2 9/125μm (Blue Adapters)

FAP6WBUSCZ SC FAP loaded w/6 SC simplex SM fiber adapters (Blue) w/zirconia ceramic split sleeves.

FAP12WBUSCZ SC FAP loaded w/12 SC simplex SM fiber adapters (Blue) w/zirconia ceramic split sleeves.

FAP6WBUDSCZ SC FAP loaded w/6 SC duplex SM fiber adapters (Blue) w/zirconia ceramic split sleeves.

SC Fiber Adapter Panels – APC OS1/OS2 9/125μm (Green Adapters)

FAP6WAGSCZ SC APC FAP loaded w/6 SC APC simplex SM fiber adapters (Green) w/zirconia ceramic split sleeves.

FAP12WAGSCZ SC APC FAP loaded w/12 SC APC simplex SM fiber adapters (Green) w/zirconia ceramic split sleeves.

FAP6WAGDSCZ SC APC FAP loaded w/6 SC APC duplex SM fiber adapters (Green) w/zirconia ceramic split sleeves.

$57.10

$114.15

$89.85

$57.10

$87.35

$114.15

$48.20

$97.05

$84.98

ST Opticom Fiber Adapter Panels (FAPs)

- Loaded with TIA/EIA-604 FOCIS-2 compatible adapters

- Exceed TIA/EIA-568-B.3 requirements

- Snap quickly into the front of all Opticom ® components

- Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia

ceramic split sleeves are recommended for OM3 multimode and OS1/OS2 singlemode applications

Part #

FAP6WSTZ

FAP6WST

FAP6WSTA

Part Description

ST FAP loaded with six ST simplex singlemode fiber optic adapters with zirconia ceramic split sleeves.

ST FAP loaded with six ST simplex multimode fiber optic adapters with phosphor bronze split sleeves.

ST FAP (angled) loaded with six ST simplex multimode fiber optic adapters with phosphor bronze split sleeves.

$34.98

$33.25

$40.75

Major Credit Cards Accepted

FAP6WAQDLCZ

FAP6WEIDLC

FAP12WEIDLC

FAP6WAQDLCZ

FAP6WEIDLC

FAP12WEIDLC

FAP12WAGSCZ

FAP6WSTZ

FAP6WSTA

FAP8WBLDLC

FAP8WEIDLC

FAP12WBULCZ

FAP6WBUSCZ

FAP6WBUDSCZ

FAP6WAGSCZ

FAP6WAGDSCZ

Call for Volume Discounts

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

65

66

QuickNet™ SFQ Series MTP Fiber Optic Cassettes

FQXO-12-10

FQ5-12-10

FQ9-12-10

- Compatible w/QuickNet Patch Panels for up to 96 fiber connections in 1RU with QAPP48HDBL QuickNet

48-port Angled Patch Panel

- Low insertion loss of 0.5dB max. per cassette & 1.0dB max. per standard cassette; system meets IEEE

802.3ae max. channel loss specification of <2.6dB Return loss >26dB (10Gig MM) >20dB (MM) >55dB (SM)

- Connect together w/high-density female MTP cable assemblies as interconnecting network segments for

deploying a remote or data center location in minutes

- Significantly reduce installation time & labor by eliminating field connector terminations

- Insertion loss data provided on every fiber cassette

- Return loss data provided on all singlemode fiber cassettes

Part Number Part Description

Optimized 10Gig 50/125μm (OM3) Multimode SFQ Series MTP Cassettes

FQXO-12-10 Optimized OM3 10Gig 50/125μm Six LC duplex adapters to one male MTP; 12-fiber optimized pre-terminated

MTP rear mount cassette provides low insertion loss of 0.5dB max. per fiber. Method A.

10Gig 50/125μm (OM3) Multimode SFQ Series MTP Cassettes

FQX-12-10 OM3 10Gig 50/125μm Six LC duplex adapters to one male MTP; 12-fiber pre-terminated MTP rear mount SFQ cassette provides low insertion loss of 1.0dB max. per fiber.

50/125μm (OM2) Multimode SFQ Series MTP Cassettes

FQ5-12-10 OM2 50/125μm Six LC duplex adapters to one male MTP; 12-fiber pre-terminated MTP rear mount cassette provides low insertion loss of 1.0dB max. per fiber.

62.5/125μm (OM1) Multimode SFQ Series MTP Cassettes

FQ6-12-10

FQ9-12-10

OM1 62.5/125μm Six LC duplex adapters to one male MTP*; 12-fiber pre-terminated MTP rear mount cassette provides low insertion loss of 1.0dB max. per fiber.

9/125μm (OS1/OS2) Singlemode SFQ Series MTP Cassettes

OS1/OS2 Singlemode Six LC duplex adapters to one male MTP; 12-fiber pre-terminated MTP rear mount cassette provides low insertion loss of 1.0dB max. per fiber.

$455.00

$380.00

$335.00

$335.00

$455.00

QuickNet High Density SFQ Small Form Factor Cable Assemblies

- Identical copper and fiber cassette form factor offers design flexibility, easy maintenance and upgrade

enabling a unified, highly scalable pre-terminated solution

- High-density design maximizes density with up to 72 fibers in one cassette, 576 in 1RU; combination of

design features provide a lower total cost of ownership

- Pre-terminated modular cassette system provides quick deployment that reduces installation time and cost.

- Product identification with data labels and QC numbers which are supplied with each product for quick port

identification and 100% traceability

Part # Part Description

FQPX48VVM050N 48 Fiber 10Gig ™ plenum rated high density Female MTP SFQ Cassette to Female MTP

SFQ Cassette cable assembly – 50m

Call for pricing

QuickNet MTP Fiber Optic Cassettes

FCZ-12-10Y

- Compatible with Opticom QuickNet Rack Mount Fiber Cassette Enclosures, Opticom Zero RU Cable

Management Solutions, and Opticom Wall Mount Enclosures, for up to 96 fiber connections in 1RU

- Low insertion loss of 0.5dB max. per optimized cassette and 1.0dB max. per standard cassette; ensures

system meets IEEE 802.3ae max. channel loss specification of <2.6dB

- Return loss: >26dB (10Gig multimode), >20dB (multimode), >55dB (singlemode)

- Adapter housing colors follow TIA/EIA-568-C.3 suggested color identification scheme

- Connect together with high-density female MTP* cable assemblies as interconnecting network segments for

deploying a remote or data center location in minutes

- Insertion loss data provided on every fiber cassette

- Return loss data provided on all singlemode fiber cassettes

- 10Gig OM3 50/125μm Fiber Cassettes are tested per IEEE 802.3ae 10 GbE to support network

transmission speeds up to 10 Gb/s for link lengths up to 300 meters and up to 550 meters for OM4 at

850nm; backward compatible with all 50/125μm (OM2) MPO or MTP* system requirements

FC6-24-10Y

FC6STMFCSY

Part Number Part Description

Optimized 10Gig 50/125μm (OM3) Multimode MTP Cassettes

FCXO-12-10Y Optimized OM3 10Gig 50/125μm 6 LC duplex adapters to one male 12-fiber pre-terminated MTP connector.

FCXO-24-10Y Optimized OM3 10Gig 50/125μm 12 LC duplex adapters to two male 12-fiber pre-terminated MTP connectors.

FCXO-12-3Y Optimized OM3 10Gig 50/125μm 6 SC duplex adapters to one male 12-fiber pre-terminated MTP connector.

10Gig 50/125μm (OM4) Multimode MTP Cassettes

FCZ-12-10Y

FCZ-24-10Y

FC6-12-10Y

FC6-24-10Y

FC6-12-3SY

FC6-12-3Y

OM4 10Gig QuickNet 6 LC duplex adapters to one male MTP connector. Method A.

OM4 10Gig QuickNet 12 LC duplex adapters to two male MTP connectors. Method A.

FCZ-12-3Y OM4 10Gig QuickNet 6 SC duplex adapters to one male MTP connector. Method A.

62.5/125μm (OM1) Multimode MTP Cassettes

FC9-12-10Y

FC9-24-10Y

OM1 62.5/125μm six LC duplex adapters to one male 12-fiber pre-terminated MTP connector.

OM1 62.5/125μm twelve LC duplex adapters to two male 12-fiber pre-terminated MTP connectors.

OM1 62.5/125μm six SC simplex adapters to one male 12-fiber pre-terminated MTP connector.

OM1 62.5/125μm six SC duplex adapters to one male 12-fiber pre-terminated MTP connector.

FC6-6-3 OM1 62.5/125μm three SC duplex adapters to one male 12-fiber pre-terminated MTP connector.

9/125μm (OS1/OS2) Singlemode MTP Cassettes

FC9-12-3SY

FC9-12-3Y

OS1/OS2 Singlemode six LC duplex adapters to one male 12-fiber pre-terminated MTP connector.

OS1/OS2 Singlemode twelve LC duplex adapters to two male 12-fiber pre-terminated MTP connectors.

OS1/OS2 Singlemode six SC simplex adapters to one male 12-fiber pre-terminated MTP connector.

OS1/OS2 Singlemode six SC duplex adapters to one male 12-fiber pre-terminated MTP connector.

FC6STMFCSY Six ST simplex adapters to one male MTP; 6-fiber pre-terminatied MTP cassette orivides low insertion loss of

1.0dB max. per fiber; singlemode (OS1/OS2) fiber

$415.00

$835.00

$510.00

$381.35

$762.65

$381.35

$304.00

$610.00

$304.00

$304.00

$320.00

$415.00

$832.00

$490.88

$415.00

$720.30

Call for Volume Discounts

Datacomtools.com

TM

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

QuickNet Hydra Cable Assemblies

- Connectivity meets or exceeds TIA/EIA-568-B.3 and ISO/IEC 11801 performance requirements

- LC and SC connector housing and boot colors follow TIA/EIA-568-C.3 suggested color identification scheme

- Jacketed cable is compliant with NFPA 262 (OFNP) flame rating

- MTP (12-fiber) connectors are FOCIS-5 compliant

- Insertion loss per mated pair: 0.50dB typical, 0.75dB max.

- Traditional connectors (Panduit LC, SC, and ST) provide design flexibility throughout the data center

- Insertion loss per mated pair: 0.10dB typical, 0.30dB max. (multimode); 0.25dB typical, 0.50dB max. (SM)

- Factory terminated and 100% tested for insertion loss (test data supplied with each assembly); SM and

10Gig MM Hydra Cable Assemblies also tested for return loss

- TIA/EIA-568-B.1-7 standards based polarity supports 10 Gb/s, multimode, and singlemode fiber types, and

allows infrastructure backwards compatibility for component interchangeability and a lower cost of ownership

- 10Gig™ laser optimized fiber is tested per IEEE 802.3ae 10 GbE to support network transmission speeds up

to 10 Gb/s for link lengths up to 300 meters at 850nm

- Application specific designs available to tailor configuration, reach, and breakout construction to application

requirements; for more information contact

Part # Part Description Length

(m)^

MTP to LC Duplex – 10Gig OM3 50/125μm Multimode Plenum Hydra Cable Assemblies

FHPX126LM005N MTP to LC duplex 12-fiber OM3 MM Plenum Rated Hydra Cable Assembly w/std. 24” breakout length.

FHPX126LM010N MTP to LC duplex 12-fiber OM3 MM Plenum Rated Hydra Cable Assembly w/std. 24” breakout length.

FHPX126LM015N MTP to LC duplex 12-fiber OM3 MM Plenum Rated Hydra Cable Assembly w/std. 24” breakout length.

FHPX126LM020N MTP to LC duplex 12-fiber OM3 MM Plenum Rated Hydra Cable Assembly w/std. 24” breakout length.

MTP to LC Duplex – OM2 50/125μm Multimode Plenum Hydra Cable Assemblies

FHP5126LM005N

FHP5126LM010N

MTP to LC duplex 12-fiber OM2 MM plenum rated hydra cable assembly w/std. 24” breakout length.

MTP to LC duplex 12-fiber OM2 MM plenum rated hydra cable assembly w/std. 24” breakout length.

FHP5126LM015N MTP to LC duplex 12-fiber OM2 MM plenum rated hydra cable assembly w/std. 24” breakout length.

FHP5126LM020N MTP to LC duplex 12-fiber OM2 MM plenum rated hydra cable assembly w/std. 24” breakout length.

MTP to LC Duplex – OS1/OS2 9/125μm Singlemode Plenum Hydra Cable Assemblies

FHP9126LM005N MTP to LC duplex 12-fiber OS1/OS2 SM plenum rated hydra cable assembly w/std. 24” breakout length.

5

5

10

15

20

FHP9126LM010N MTP to LC duplex 12-fiber OS1/OS2 SM plenum rated hydra cable assembly w/std. 24” breakout length.

10

FHP9126LM015N MTP to LC duplex 12-fiber OS1/OS2 SM plenum rated hydra cable assembly w/std. 24” breakout length.

15

FHP9126LM020N MTP to LC duplex 12-fiber OS1/OS2 SM plenum rated hydra cable assembly w/std. 24” breakout length.

20

5

10

15

20

$537.05

$568.95

$600.85

$632.70

$524.55

$543.90

$563.25

$582.65

$609.35

$623.30

$637.25

$651.15

^Additional lengths and availability: The above lengths and configurations are stock items.

For other lengths or configurations, contact Customer Service for actual lead times.

QuickNet MTP Interconnect Cable Assemblies – Multimode 10Gig 50/125μm (OM3 and OM4)

- Pass all TIA/EIA-568-B.3 performance requirements

- FOCIS-5 compliant

- Insertion loss per mated pair: 0.50dB typical; 0.75dB max.

- Tested per IEEE 802.3ae 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths

up to 300 meters for OM3 and up to 550 meters for OM4 at 850nm with 50/125μm (OM3 and OM4) laser

optimized fiber

- Backward compatible with all 50/125μm (OM2) MPO or MTP system requirements

- Factory terminated and 100% tested for insertion loss

- Insertion loss and return loss data recorded for every 10Gig Multimode Interconnect Cable Assembly

- Lifetime traceability of test data to a Q.C. number on each cable assembly

Part # Part Description Length

(m)^

MTP Interconnect Cable Assemblies – Multimode 10Gig ™ OM3 50/125μm

FX12D5-5M1Y Female MTP to female MTP 12-fiber interconnect cable assembly (one female MTP connector on each end on ribbon interconnect cable) – 10Gig 50/125μm. Outside diameter: 5mm x 2.5mm.

1 $275.95

For OM4 interconnect assembly, replace the X ( FX12D5-5M1Y) with Z (FZ12D5-5M1Y). ^Additional lengths and availability: Interconnect cable assemblies are available in 1 – 10 meter lengths in 1 meter increments, and 15, 20, 25 and 30 meter lengths. To order lengths other than 1 meter, replace the 1 after the M (FZ12D5-5M1) with the desired length (FZ12D5-5M2 for 2 meter length). The above lengths are stock items. For other lengths or male MTPs, contact Customer Service for actual lead times.

QuickNet MTP Interconnect Cable Assemblies – Multimode 50/125μm (OM2)

- Pass all TIA/EIA-568-B.3 performance requirements

- FOCIS-5 compliant

- Insertion loss per mated pair: 0.50dB typical; 0.75dB max.

- Factory terminated and 100% tested for insertion loss

- Insertion loss data recorded for every multimode cable assembly

- Lifetime traceability of test data to a Q.C. number on each cable assembly

Part # Part Description

F512D5-5M1Y Female MTP to female MTP 12-fiber interconnect cable assembly (one female MTP connector on each end on ribbon interconnect cable) – 50/125μm.

Length

(m)^

1 $249.60

^Additional lengths and availability: Interconnect cable assemblies are available in 1 – 10 meter lengths in 1 meter increments, and 15, 20, 25 and 30 meter lengths. To order lengths other than 1 meter, replace the 1 after the M (F512D5-5M1Y) with the desired length (F512D5-5M2Y for 2 meter length). The above lengths are stock items. For other lengths or male MTPs, contact Customer Service for actual lead times.

Major Credit Cards Accepted

Call for Volume Discounts

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

67

68

QuickNet MTP Trunk Cable Assemblies

- Connectivity meets or exceeds TIA/EIA-568-B.3 and ISO/IEC 11801 performance requirements.

- Jacketed cable is compliant with NFPA 262 (OFNP) flame rating.

- MTP (12-fiber) connectors are FOCIS-5 compliant.

- Insertion loss per mated pair: 0.50dB typical, 0.75dB max.

- Panduit proprietary MTP* polishing provides low insertion loss and high return loss, minimizing variability for

improved channel link loss performance.

- TIA/EIA-568-B.1-7 (Method A) standards based polarity supports 10 Gb/s, MM, and SM fiber types, & allows

infrastructure backwards compatibility for component interchangeability and a lower cost of ownership.

- 10Gig laser optimized fiber is tested per IEEE 802.3ae 10 GbE to support network transmission speeds up to

10 Gb/s for link lengths up to 300 meters at 850nm.

Part # Part Description

Female MTP to Female MTP – 10Gig OM3 Multimode Plenum Trunk Cable Assemblies

FSPX1255F100A (F) MTP to (F) MTP 12-fiber 10Gig 50/125μm Trunk Cable Assembly w/ pulling eye on one end.

FSPX1255F150A (F) MTP to (F) MTP 12-fiber 10Gig 50/125μm Trunk Cable Assembly w/ pulling eye on one end.

FSPX1255F200A (F) MTP to (F) MTP 12-fiber 10Gig 50/125μm Trunk Cable Assembly w/ pulling eye on one end.

FSPX2455F100A (F) MTP to (F) MTP 24-fiber 10Gig 50/125μm Trunk Cable Assembly w/ pulling eye on one end.

FSPX2455F150A (F) MTP to (F) MTP 24-fiber 10Gig 50/125μm Trunk Cable Assembly w/ pulling eye on one end.

FSPX2455F200A (F) MTP to (F) MTP 24-fiber 10Gig 50/125μm Trunk Cable Assembly w/ pulling eye on one end.

FSPX4855F100A (F) MTP to (F) MTP 48-fiber 10Gig 50/125μm Trunk Cable Assembly w/ pulling eye on one end.

FSPX4855F150A (F) MTP to (F) MTP 48-fiber 10Gig 50/125μm Trunk Cable Assembly w/ pulling eye on one end.

FSPX4855F200A (F) MTP to (F) MTP 48-fiber 10Gig 50/125μm Trunk Cable Assembly w/ pulling eye on one end.

Female MTP to Female MTP – OM2 Multimode Plenum Trunk Cable Assemblies

FSP51255F100A (F) MTP to (F) MTP 12-fiber 50/125μm trunk cable assembly w/pulling eye on one end.

FSP51255F150A (F) MTP to (F) MTP 12-fiber 50/125μm trunk cable assembly with pulling eye on one end.

FSP51255F200A (F) MTP to (F) MTP 12-fiber 50/125μm trunk cable assembly with pulling eye on one end.

FSP52455F100A (F) MTP to (F) MTP 24-fiber 50/125μm trunk cable assembly with pulling eye on one end.

FSP52455F150A (F) MTP to (F) MTP 24-fiber 50/125μm trunk cable assembly with pulling eye on one end.

FSP52455F200A (F) MTP to (F) MTP 24-fiber 50/125μm trunk cable assembly with pulling eye on one end.

FSP54855F100A (F) MTP to (F) MTP 48-fiber 50/125μm trunk cable assembly with pulling eye on one end.

FSP54855F150A (F) MTP to (F) MTP 48-fiber 50/125μm trunk cable assembly with pulling eye on one end.

FSP54855F200A (F) MTP to (F) MTP 48-fiber 50/125μm trunk cable assembly with pulling eye on one end.

Female MTP to Female MTP – OS1/OS2 Singlemode Plenum Trunk Cable Assemblies

FSP91255F100A (F) MTP to (F) MTP 12-fiber 9/125μm trunk cable assembly with pulling eye on one end.

FSP91255F150A (F) MTP to (F) MTP 12-fiber 9/125μm trunk cable assembly with pulling eye on one end.

FSP91255F200A

(F) MTP to (F) MTP 12-fiber 9/125μm trunk cable assembly with pulling eye on one end.

FSP92455F100A (F) MTP to (F) MTP 24-fiber 9/125μm trunk cable assembly with pulling eye on one end.

FSP92455F150A (F) MTP to (F) MTP 24-fiber 9/125μm trunk cable assembly with pulling eye on one end.

FSP92455F200A (F) MTP to (F) MTP 24-fiber 9/125μm trunk cable assembly with pulling eye on one end.

FSP94855F100A (F) MTP to (F) MTP 48-fiber 9/125μm trunk cable assembly with pulling eye on one end.

FSP94855F150A (F) MTP to (F) MTP 48-fiber 9/125μm trunk cable assembly with pulling eye on one end.

FSP94855F200A (F) MTP to (F) MTP 48-fiber 9/125μm trunk cable assembly with pulling eye on one end.

Length (Ft.)^

100

150

200

100

150

200

100

150

200

100

150

200

100

150

200

100

150

200

100

150

200

100

150

200

100

150

200

$669.45

$775.00

$885.00

$1335.00

$1565.00

$1795.00

$3015.00

$3675.00

$4340.00

$690.85

$784.10

$877.32

$1360.00

$1545.00

$1735.00

$2975.00

$3585.00

$4195.00

$795.00

$872.50

$952.75

$1595.00

$1755.00

$1915.00

$3545.00

$4060.00

$4575.00

Opti-Core Traditional Trunk Cable Assemblies

- Connectivity meets or exceeds TIA/EIA-568-B.3 and ISO/IEC 11801 performance requirements

- LC and SC connector housing and boot colors follow TIA/EIA-568-C.3 suggested color identification scheme

- Jacketed cable is compliant with UL1666 (OFNR) or NFPA 262 (OFNP) flame rating

- Insertion loss per mated pair: 0.10dB typical, 0.30dB max. (MM); 0.25dB typical, 0.50dB max. (SM)

- Traditional connectors (Panduit LC, SC, and ST) provide design flexibility throughout the data center

- Factory terminated and 100% tested for insertion loss (test data supplied with each assembly); SM and 10Gig

MM Trunk Cable Assemblies are also tested for return loss

Part # Part Description

LC to LC Simplex – 10Gig™ OM3 Multimode Plenum Trunk Cable Assemblies

FSPX1211F100A LC to LC simplex 12-fiber 10Gig™ 50/125μm Trunk Cable Assembly with pulling eye on one end.

FSPX1211F150A LC to LC simplex 12-fiber 10Gig™ 50/125μm Trunk Cable Assembly with pulling eye on one end.

FSPX1211F200A LC to LC simplex 12-fiber 10Gig™ 50/125μm Trunk Cable Assembly with pulling eye on one end.

FSPX2411F100A LC to LC simplex 24-fiber 10Gig™ 50/125μm Trunk Cable Assembly with pulling eye on one end.

FSPX2411F150A LC to LC simplex 24-fiber 10Gig™ 50/125μm Trunk Cable Assembly with pulling eye on one end.

FSPX2411F200A LC to LC simplex 24-fiber 10Gig™ 50/125μm Trunk Cable Assembly with pulling eye on one end.

FSPX4811F100A LC to LC simplex 48-fiber 10Gig™ 50/125μm Trunk Cable Assembly with pulling eye on one end.

FSPX4811F150A LC to LC simplex 48-fiber 10Gig™ 50/125μm Trunk Cable Assembly with pulling eye on one end.

FSPX4811F200A LC to LC simplex 48-fiber 10Gig™ 50/125μm Trunk Cable Assembly with pulling eye on one end.

LC to LC Simplex – OM2 Multimode Plenum Trunk Cable Assemblies

FSP51211F100A LC to LC simplex 12-fiber 50/125μm trunk cable assembly with pulling eye on one end.

FSP51211F150A LC to LC simplex 12-fiber 50/125μm trunk cable assembly with pulling eye on one end.

FSP51211F200A LC to LC simplex 12-fiber 50/125μm trunk cable assembly with pulling eye on one end.

FSP52411F100A LC to LC simplex 24-fiber 50/125μm trunk cable assembly with pulling eye on one end.

FSP52411F150A LC to LC simplex 24-fiber 50/125μm trunk cable assembly with pulling eye on one end.

FSP52411F200A LC to LC simplex 24-fiber 50/125μm trunk cable assembly with pulling eye on one end.

FSP54811F100A LC to LC simplex 48-fiber 50/125μm trunk cable assembly with pulling eye on one end.

FSP54811F150A LC to LC simplex 48-fiber 50/125μm trunk cable assembly with pulling eye on one end.

FSP54811F200A LC to LC simplex 48-fiber 50/125μm trunk cable assembly with pulling eye on one end.

LC to LC Simplex – OS1/OS2 Singlemode Plenum Trunk Cable Assemblies

FSP91211F100A LC to LC simplex 12-fiber 9/125μm trunk cable assembly with pulling eye on one end.

FSP91211F150A LC to LC simplex 12-fiber 9/125μm trunk cable assembly with pulling eye on one end.

FSP91211F200A LC to LC simplex 12-fiber 9/125μm trunk cable assembly with pulling eye on one end.

FSP92411F100A LC to LC simplex 24-fiber 9/125μm trunk cable assembly with pulling eye on one end.

FSP92411F150A LC to LC simplex 24-fiber 9/125μm trunk cable assembly with pulling eye on one end.

FSP92411F200A LC to LC simplex 24-fiber 9/125μm trunk cable assembly with pulling eye on one end.

FSP94811F100A LC to LC simplex 48-fiber 9/125μm trunk cable assembly with pulling eye on one end.

FSP94811F150A LC to LC simplex 48-fiber 9/125μm trunk cable assembly with pulling eye on one end.

FSP94811F200A LC to LC simplex 48-fiber 9/125μm trunk cable assembly with pulling eye on one end.

Length

(Ft.)^

100

150

200

100

150

200

100

150

200

100

150

200

100

150

200

100

150

200

100

150

200

100

150

200

100

150

200

$899.25

$1004.55

$1109.95

$1795.00

$2040.00

$2285.00

$3605.00

$4220.00

$4835.00

$915.95

$1005.75

$1095.49

$1705.00

$1905.00

$2105.00

$3410.00

$3935.00

$4455.00

$960.00

$1025.00

$1095.00

$2051.00

$2235.00

$2415.00

$4045.00

$4415.00

$4795.00

Call for Volume Discounts

Datacomtools.com

TM

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

Mini-Com Modular Faceplate Patch Panels

- Angled patch panels facilitate proper bend radius control & minimize the need for horizontal cable managers

- Accept Mini-Com Modules for fiber, UTP, & audio/video, which snap in & out for easy moves, adds, & changes

- Mount to standard EIA 19” racks or 23” racks with optional extender brackets

Part # Part Description

Mini-Com Angled Modular Patch Panels with Labels

CPPLA24WBLY 24-port angled patch panel with labels, supplied with six factory installed CFFPL4 type front removable snap-in faceplates.

CPPLA48WBLY 48-port angled patch panel with labels, supplied with twelve factory installed CFFPL4 type front removable snap-in faceplates.

Mini-Com Modular Patch Panels with Labels

CPPL24WBLY

CPPL48WBLY

24-port patch panel with labels, supplied with six factory installed

CFFPL4 type front removable snap-in faceplates.

48-port patch panel with labels, supplied with twelve factory installed

CFFPL4 type front removable snap-in faceplates.

Replacement Labels for Mini-Com Modular Patch Panels

C4PPLK

Replacement label/label cover kit for Mini-Com Modular Patch Panels with Labels and Mini-Com® Modular Furniture Faceplates with Labels.

Each kit contains six labels and six clear label covers per bag.

# of

Rack

Spaces^

1

2

1

2

Std.

Pkg.

Qty.

Std.

Ctn.

Qty.

1

1

1

1

1

10

10

10

10

10

$50.15

$86.45

$27.60

$49.45

$1.95

^ One rack space = 1.75” (44.45mm). M6 and #12-24 mounting screws included.

QuickNet Cable Assemblies

CPPLA24WBLY

CPPLA48WBLY

CPPL24WBLY

CPPL48WBLY

- Allow quick network deployment compared to field-terminated installations

- 100% performance tested to electrical permanent link specifications; shipped with permanent link test data

- Terminated in factory controlled environment for consistent network performance

- Pre-bundled with six cables for easy installation

- Plenum or riser cable flame ratings

- Category 6 UTP and Category 6A UTP/Shielded performance levels available

- Available in many common standard lengths and in one foot increments from 10 to 295 feet

- Enable multiple termination types including, pre-terminated cassettes, jack modules, modular plugs, plug

pack and/or unterminated options

Pre-Terminated UTP Cassette Pre-Terminated Shielded Cassette

Description

Cat6A UTP QuickNet Cable made w/TX6A 10Gig UTP Copper Cable w/ MaTriX

Technology, pre-terminated TX6A 10Gig UTP Jack Module Cassettes on each end.

Cat6A SD UTP QuickNet Cable made w/TX6A-SD 10Gig UTP Copper Cable w/MaTriX

Technology, pre-terminated TX6A 10Gig UTP Jack Module Cassettes on each end.

Cat6 UTP QuickNet Cable made w/Cat6 UTP Cable & pre-terminated TX6 plus UTP

Jack Module Cassettes on each end.

Cable Type

Riser

Plenum

Riser

Plenum

Riser

Plenum

Part # Template

QZRBCBCBXX nn

QZPBCBCBXX nn

QXRBCBCBXX nn

QXPBCBCBXX nn

QCRBCBCBXX nn

QCPBCBCBXX nn

Available

Lengths (in feet) nn = 10, 15, 20,

25, 30, 35, 40,

45, 50, 55, 60,

65, 70, 75 or 80

Jack Modules Modular Plugs

1 2 3 4 5 6 7 8 9 10 11

Q A P B C B C B X X 10

Plug Pack Un-Terminated

Call for Quote

1 Q = QuickNet

2 Performance

Level

B = Cat6 Enhanced UTP

C = Cat6 UTP E = Cat6A (TX6A

3 Flame Rating R = Riser or P = Plenum

10Gig) Shielded

4 Cable Color B = Blue or W = White

5 Termination

6

7

8

End 1

Termination

End 1 Color

Termination

End 2

Termination

End 2 Color

X = Cat6A (TX6A-SD

10Gig) UTP MaTriX

Z = Cat6A (TX6A 10Gig) UTP MaTriX

C = Cassette J = Jack modules

P = Modular plugs

K = Jack modules staggered right

L = Jack modules staggered left

Q = Modular plugs staggered

S = Modular plugs staggered left right

Jack Module Color Options B = Blue, E = Electric Ivory, G = Green, H = Off White, I = International Gray, L = Black, O = Orange, R = Red, V = Violet, W = White, Y = Yellow Shielded Jack Modules, chose option L (all Shielded Jack Modules are Black) Modular Plug and Unterminated Color Options X = No color option available, all modular plugs are clear

C = Cassette J = Jack modules

P = Modular plugs

A = Plug pack

(6-pack)

R = Recessed plug pack (6pk)

K = Jack modules staggered

L = Jack modules stag-

Q = Modular plugs stag-

S = Modular plugs stag-

U = Unterminated

O = Unterminated w/cassette & jack modules for right gered left gered right gered left on-site termination

Jack Module Color Options B = Blue, E = Electric Ivory, G = Green, H = Off White, I = International Gray, L = Black, O = Orange, R = Red, V = Violet, W = White, Y = Yellow Shielded Jack Modules, chose option L (all Shielded Jack Modules are Black) Plug Pack Color Options B = Blue, W = White, R = Red, L = Black Recessed Plug Pack Color Option S = Silver Modular Plug and Unterminated Color Option X = No color option available, all modular plugs are clear

9 Options

10 Custom

Labeling*

11 Length**

P = Pulling eye X = No assembly options requested

L = Custom assembly label

C = Custom cable labels

B = Custom assembly and cable labels

10’ to 295’ (one foot increments)

X = No custom labels requested

Call for Volume Discounts

69

Major Credit Cards Accepted

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

70

DP6A 10Gig UTP Patch Panels

DPA246X88TGY

DPA486X88TGY

- Exceed requirements of ANSI/TIA-568-C.2 Cat6A, IEEE 802.3an-2006, & ISO 11801 Class EA standards

- Exceed requirements of ANSI/TIA-568-C.2 Category 6A & IEC 61156-5 Category 6A component standards

- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications

- Each port is 100% tested to ensure NEXT & RL performance & is individually serialized to support traceability

- Utilize 110 punchdown termination on back panel & include retention cap for each port

- Each port contains a universal label that is color-coded for T568A & T568B wiring schemes

- Contacts plated with 50 microinches of gold for superior performance

- Angled versions allow for higher density applications by easily routing the patch cords to each side of the

panel eliminating the need for horizontal cable management

- Terminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable

- Mount to standard EIA 19” rack or 23” racks with optional extender bracket

DP246X88TGY

Part # Part Description

DP6A™ 10Gig ™ Angled Patch Panels

DPA246X88TGY 24-port, angled, Cat6A, 10 Gb/s patch panel w/24 RJ45 8-position, 8-wire ports.

DPA486X88TGY 48-port, angled, Cat6A, 10 Gb/s patch panel w/48 RJ45 8-position, 8-wire ports.

DP6A™ 10Gig ™ Flat Patch Panels

DP246X88TGY 24-port, Category 6A, 10 Gb/s patch panel with 24 RJ45 8-position, 8-wire ports.

DP486X88TGY 48-port, Category 6A, 10 Gb/s patch panel with 48 RJ45 8-position, 8-wire ports.

Rack

Spaces^

1

2

1

2

$412.65

$642.35

$324.10

$473.05

DP486X88TGY

Mini-Com Ultimate ID TX6 PLUS Modular Patch Panel Kits

UICMPPKA6G24BL

UICMPPK6G24BL

- Supplied with black Mini-Com TX6 PLUS Jack Modules

- Include color-coded termination caps

- Front access faceplates in panels

- Available with or without labels

- Can be clearly identified with the PanTher LS8E or Cougar LS9 Hand-Held Thermal Transfer Printers

CPPKA6G24WBL

CPPKLA6G24WBL

CPPK6G24WBL

Part Number Part Description Labels

Required

Mini-Com Ultimate ID Angled Modular Patch Panel Kit

UICMPPKA6G24BL 24-port UICMPPA24BL angled panel w/24 CJ688TGBL jack modules. Six 4-Port

Mini-Com Ultimate ID Modular Patch Panel Kit

UICMPPK6G24BL 24-port UICMPP24BL panel w/24 CJ688TGBL jack modules.

Mini-Com Angled Modular Patch Panel Kits – with Labels

CPPKA6G24WBL 24-port angled patch panel with 24 CJ688TGBL jack modules.

CPPKLA6G24WBL 24-port CPPLA24WBL angled patch panel with 24 CJ688TGBL jack modules.

Mini-Com Modular Patch Panel Kits – with Labels

CPPK6G24WBL 24-port CPP24WBL patch panel with 24 CJ688TGBL jack modules.

CPPKL6G24WBL 24-port CPPL24WBL patch panel with 24 CJ688TGBL jack modules.

Six 4-Port

-

-

-

-

Rack

Spaces^

1

1

1

1

1

1

$255.00

$229.95

$279.00

$281.55

$254.00

$255.95

^One rack space = 1.75” (44.45mm). Includes #12-24 and metric M6 screws to mount the patch panel to the rack.

CPPKL6G24WBL

DP6 PLUS UTP Patch Panels

DPA24688TGY

DPA48688TGY

DP24688TGY

DP48688TGY

Call for Volume Discounts

- Exceed ANSI/TIA-568-C.2 Cat6 & ISO 11801 2nd Edition Class E standards

- Meet requirements of IEEE 802.3af & IEEE 802.3at for PoE applications

- Each port is 100% tested to ensure NEXT & RL performance & is individually serialized to support traceability

- Utilize 110 punchdown termination on back panel & includes retention cap for each port

- Each port contains a universal label that is color-coded for T568A & T568B wiring schemes

- Angled versions allow for higher density applications by easily routing the patch cords to each side of the

panel eliminating the need for horizontal cable management

- Terminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable

- Mount to standard EIA 19” rack or 23” racks w/optional extender bracket

Part # Part Description

DP6 PLUS Angled Patch Panels

DPA24688TGY 24-port, angled, Category 6, patch panel with 24 RJ45, 8-position, 8-wire ports.

DPA48688TGY 48-port, angled, Category 6, patch panel with 48 RJ45, 8-position, 8-wire ports.

DP6 PLUS Flat Patch Panels

DP12688TGY

DP24688TGY

DP48688TGY

12-port, Category 6, patch panel with twelve RJ45, 8-position, 8-wire ports.

Mounts to 89D wall mount bracket.

24-port, Category 6, patch panel with 24 RJ45, 8-position, 8-wire ports.

48-port, Category 6, patch panel with 48 RJ45, 8-position, 8-wire ports.

^One rack space = 1.75” (44.45mm). M6 and #12-24 mounting screws included.

Rack

Spaces^

1

2

1

2

$274.05

$591.15

$106.90

$219.25

$473.05

Datacomtools.com

TM

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

DP5e UTP Patch Panels

- Exceed ANSI/TIA-568-C.2 Category 5e & ISO 11801 Class D standards

- Meet requirements of IEEE 802.3af & IEEE 802.3at for PoE applications

- Utilize 110 termination on back panel and includes retention cap for each port

- Contacts plated with 50 microinches of gold for superior performance

- Angled versions allow for higher density installations by easily routing the patch cords to each side of the

panel eliminating the need for horizontal cable management

- Terminate 4 pair, 22 - 26 AWG, 100 ohm, solid or stranded twisted pair cable

- Mount to standard EIA 19” rack or 23” racks with optional extender bracket

Part Number Part Description

DP5e Angled Patch Panels

DPA245E88TGY 24-port, Cat5e, patch panel with 24 RJ45, 8-position, 8-wire ports.

DPA485E88TGY 48-port, Cat5e, patch panel with 48 RJ45, 8-position, 8-wire ports.

DP5e Flat Patch Panels

DP125E88TGY 12-port, Cat5e, panel w/12 RJ45, 8-position, 8-wire ports. Mounts to 89D wall mount.

DP245E88TGY 24-port, Cat5e, patch panel with 24 RJ45, 8-position, 8-wire ports.

DP485E88TGY

48-port, Cat5e, patch panel with 48 RJ45, 8-position, 8-wire ports.

^One rack space = 1.75” (44.45mm). M6 and #12-24 mounting screws included.

Rack

Spaces^

1

2

1

2

$199.35

$398.65

$80.55

$159.55

$318.65

Mini-Com Jack Modules

- Each jack is 100% tested to ensure NEXT and RL performance and is individually serialized for traceability

- No punchdown tool required; termination tool (EGJT) ensures conductors are fully terminated by utilizing a

smooth forward motion without impact on critical internal components for maximum reliability

- Can be re-terminated a minimum of twenty times

- Terminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable

- Universal termination cap is color-coded for T568A and T568B wiring schemes

Part # Part Description

CJ6X88TGIW* Cat6A, RJ45, 10 Gb/s, 8-position, 8-wire universal module.

CJ6X88TGIW-24 Cat6A, RJ45, 10 Gb/s, 8-position, 8-wire universal module, bulk packaged

CJ688TGIW+ Cat6, RJ45, 8-position, 8-wire, universal, module

CJ688TGIW-24 Cat6, RJ45, 8-position, 8-wire, universal module, bulk packaged

CJ5E88TGIW‡ Cat5e, RJ45, 8-position, 8-wire universal jack module.

CJ5E88TGIW-24 Cat5e, RJ45, 8-position, 8-wire universal module, bulk packaged

Color‡

Off White

Off White

Off White

Off White

Qty.

$12.35

$281.25

1 $8.20

24 $198.72

1 $5.98

24 $136.35

*For standard colors other than Off White, replace suffix IW (Off White) with EI (Electric Ivory), WH (White), AW (Arctic White), IG (International

Gray), BL (Black), OR (Orange), RD (Red), BU (Blue), GR (Green), YL (Yellow) or VL (Violet).

+For other colors replace suffix IW (Off White) with BL (Black).

‡For standard colors other than Off White, replace suffix IW (Off White) with WH (White), BL (Black), RD (Red), or BU (Blue).

Mini-Com Classic Series Faceplates

DPA245E88TGY

DPA485E88TGY

DP245E88TGY

DP485E88TGY

Category 6A

Category 5e

- Accept Mini-Com Modules for STP and UTP, fiber

optic, and audio/video, which snap in and out for

easy moves, adds, and changes

For other colors replace suffix IW (Off White) w/EI (Electric Ivory),

WH (White), or IG (International Gray)

All faceplates supplied with mounting screws.

Mini-Com Executive Series Faceplates

CFPL2IWY CFPL3IWY CFPL4IWY CFPL6IWY

Part # Part Description

CFPL2IWY Vertical faceplate with 2 Modules spaces with labels

CFPL3IWY Vertical faceplate with 3 Modules spaces with labels

CFPL4IWY Vertical faceplate with 4 Modules spaces with labels

CFPL6IWY Vertical faceplate with 6 Modules spaces with labels

$1.89

$1.89

$1.89

$1.89

CFP1IW CFP2IW CFP4IW

Part #

CFP1IW

CFP2IW

CFP4IW

Part Description

Vertical faceplate with 1 Module space

Vertical faceplate with 2 Modules space

Vertical faceplate with 4 Modules space

CFPH2IW Horizontal faceplate with 2 Modules space

CFPH4IW Horizontal faceplate with 4 Modules space

Mini-Com Shuttered Surface Mount Boxes

CFPH2IW

Category 6

CFPH4IW

$1.49

$1.49

$1.49

$1.89

$1.89

CBXS1IW-A CBXS2IW-A CBXS3IW-AY CBXS4IW-AY CBXS6IW-AY

CFPE1IWY CFPE2IWY CFPE3IWY CFPE4IWY CFPE10IWY-2GY

Part #

CFPE1IWY

CFPE2IWY

CFPE4IWY

Part Description

Single gang, vertical faceplate with 1 Module space

Single gang, vertical faceplate with 2 Modules spaces

Single gang, vertical faceplate with 4 Modules spaces

CFPE6IWY Single gang, vertical faceplate with 6 Modules spaces

CFPE10IW-2GY Double gang, vertical faceplate with 10 Modules spaces

$2.05

$2.05

$2.05

$2.05

$4.15

Major Credit Cards Accepted

Part #

CBXS1IW-A

Part Description

Surface mount box with 1 port. 0.62”H x 1.64”W x 2.47”L

CBXS2IW-A Surface mount box with 2 ports. 0.94”H x 2.40”W x 2.5”L

CBXS3IW-AY Surface mount box with 3 ports. 0.94”H x 3.62”W x 3.31”L

CBXS4IW-AY Surface mount box with 4 ports. 0.94”H x 4.65”W x 3.28”L

CBXS6IW-AY Surface mount box with 6 ports. 0.94”H x 6.7”W x 3.28”L

CBXSD6IW-AY Deep surface mount box with 6 ports

(includes cable routing bridge). 1.16”H x 7.58”W x 3.86”L

Call for Volume Discounts

$3.80

$4.65

$6.98

$9.35

$13.25

$15.75

71

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

4 Post Cable Management Rack System

1

2

1

3

6

4

5

- Offered in 23”, 30”, 36” and 42” depths

- Offered in 84” and 96” heights

- Fully adjustable rails can be adjusted after

rack is secured to floor

- Cage nut rails for server applications and tapped rails for

switch applications

- 2,500 lbs. (1134 kg) load rating, UL Listed

Part # Part Description

1 R4P36CN* Cage nut rails, 84.0”H x 23.25”W x 36.0”D

R4P42CN*

Cage nut rails, 84.0”H x 23.25”W x 41.5”D

4 Post Rack Threaded Rail

R4P23*

R4P*

R4P36*

R4P42*

4 Post Rack Accessories

R4PWF

RSHLF23

RSHLF

RSHLF36

2 R4PFP

5 RCSTR

4 CVPPB

Dimensions: 84.0”H x 23.25”W x 23.0”D

Dimensions: 84.0”H x 23.25”W x 30.0”D

Dimensions: 84.0”H x 23.25”W x 36.0”D

Dimensions: 84.0”H x 23.25”W x 41.5”D

Top trough w/waterfall creates pathway above rack. 1.9”H x 26.1”W x 8.5”D

4 post rack mount shelf. Load rating 275 lbs. 1.7”H x 19.0”W x 23.0”D

4 post rack mount shelf. Load rating 275 lbs. 1.7”H x 19.0”W x 30.0”D

4 post rack mount shelf. Load rating 275 lbs. 1.7”H x 19.0”W x 36.0”D

Adjustable vertical filler panel for Panduit 4 Post Racks

4 post rack casters.

Bracket to vertically mount 1 RU EIA 19” copper and fiber patch panels to the side of the Net-Access Cabinet posts or 4 post racks.

3

CNSPE

CVPDUB

Net-Access Network Cabinet and 4 post rack end channel slack spools.

Package includes one left and one right slack spool and mounting brackets.

Bracket for vertical POU mounting to the side of the Net-Access Cabinet posts or 4 post racks (kit of two).

6 R4PFL

R4PFR

R4PFM Finger managers for 7 and 8 foot Panduit 4 Post Racks.

Thermal Ducts for 4 Post Racks

R4PAE1

Left vertical finger section for cable management.

Right vertical finger section for cable management.

R4PAE2

R4PAE3

Panduit 4 post rack thermal duct for use with Cisco^ 6509, 6509E, 6513,

9513 Director and Juniper 8208 switches.

Panduit 4 post rack thermal ducting for use with Cisco^ 7018 switch.

Panduit 4 post rack thermal ducting for use with Cisco^ 7009 switch.

*Free shipping not included ‡One rack space = 1.75” (44.45mm).

11

11

# of Rack

Spaces‡

Std. Pkg.

Qty.

45

45

1

1

45

1

1

1

45

45

45

45

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

$765.00

$785.00

$670.00

$705.00

$797.95

$821.95

$62.40

$139.75

$148.00

$155.90

$145.00

$300.00

$49.15

$84.85

$84.85

$45.05

$45.00

$250.00

$409.50

$631.25

$480.00

4 Post Vertical Manager Accessories

R4PFM

PED12 PEV12

R4P36CN

R4PFL

R4P42

72

CVPDUB

Call for Volume Discounts

Datacomtools.com

TM

R4PFR

PEVBRC12 PEVEP PEVF12

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

PatchRunner High Capacity Vertical Cable Management System

- High capacity minimizes area required for network layout, freeing up valuable floor space

- Allows vertical mounting of many EIA 19” accessories, such as patch panels

- Ventilated side walls provide maximum airflow for equipment cooling

- Large finger spacing accommodates up to 48 Category 6A cables

- Finger sections can be removed to improve airflow, & allow routing of large cable bundles

Part # Part Description # of Rack

Spaces‡

4 Post Rack

R4P*

R4P23*

R4P36*

1 R4P42*

High Capacity Dual Sided Vertical Managers

PEV6*

PEV8*

84.0”H x 23.25”W x 30.0”D

84.0”H x 23.25”W x 23.0”D

84.0”H x 23.25”W x 36.0”D

84.0”H x 23.25”W x 41.5”D

PEV10*

2 PEV12*

Dimensions: 83.5”H x 6.0”W x 28.1”D

Dimensions: 83.5”H x 8.0”W x 28.1”D

Dimensions: 83.5”H x 10.0”W x 28.1”D

Dimensions: 83.5”H x 12.0”W x 28.1”D

High Capacity Single Sided Vertical Managers

PEVF6*

PEVF8*

PEVF10*

PEVF12*

Dimensions: 83.5”H x 6.0”W x 15.9”D

Dimensions: 83.5”H x 8.0”W x 15.9”D

Dimensions: 83.5”H x 10.0”W x 15.9”D

Dimensions: 83.5”H x 12.0”W x 15.9”D

PatchRunner™ High Capacity Dual Hinged Metal Doors

PED6*

PED8*

PED10*

3 PED12*

Accessories

PEVEP

PEVBRC6

PEVBRC8

Dimensions: 82.8”H x 6.1”W x 1.7”D

Dimensions: 82.8”H x 8.1”W x 1.7”D

Dimensions: 82.8”H x 10.1”W x 1.7”D

Dimensions: 82.8”H x 12.1”W x 1.7”D

End Panel. Dimensions: 83.7”H x 23.2”W x .5”D

Horizontal cross brace bend radius control clips for Cable Managers PEV6 and PEVF6.

45

45

45

45

Horizontal cross brace bend radius control clips for Cable Managers PEV8 and PEVF8.

PEVBRC10 Horizontal cross brace bend radius control clips for Cable Managers PEV10 and PEVF10.

PEVBRC12 Horizontal cross brace bend radius control clips for Cable Managers PEV12 and PEVF12.

45

45

45

45

45

45

45

45

45

45

45

45

Std. Pkg.

Qty.

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Overall height for managers is 95.5” & Overall door height is 94.4” *Free shipping not included

NetManager High Capacity Horizontal Cable Managers

$705.00

$670.00

$797.95

$821.95

$390.00

$404.00

$425.00

$478.40

$350.00

$355.00

$365.00

$385.00

$185.35

$205.35

$223.80

$235.00

$195.00

$31.89

$42.45

$53.10

$63.65

- Innovative inset fingers slope inward toward back of managers offering unobstructed access to network

cabling for easier moves, adds, and changes

- Large front finger openings easily accommodate Category 6 and 10 GbE cables, speeding installation and

reducing maintenance costs

- Rear cable management finger spacing utilizes open D-rings for greater accessibility

- Can be used to create large capacity horizontal pathways for routing cable

- Patented front and rear dual hinged cover allows cable access without removing cover

- Curved surfaces maintain cable bend radius

- Built in cable retainers hold cable in place for easy moves, adds, and changes

- Mount to 19” EIA racks and cabinets

- Covers, #12-24 and M6 mounting screws included

- Design fits to the front of the NetRunner High Capacity WMPVHCF45E/WMPVHC45E Vertical Managers

‡One rack space = 1.75” (44.45mm). All product color is black.

NM1

NM2

NM3

3

2

1

NMF1

NMF2

NMF3

Part #

NM1

NM2

NM3

NM4

NMF1

NMF2

NMF3

NMF4

NCMH2

NCMHF2

NCMHF1

Cable Capacity Chart for NetManager High Capacity Horizontal Cable Managers

Cat. 6A (.298”)

Front

18

54

96

144

18

54

96

144

-

-

-

Back

18

54

96

144

-

-

-

-

-

-

-

Cat. 6A (.289”)

Front

18

54

102

144

18

54

102

144

-

-

-

Back

18

54

102

144

-

-

-

-

-

-

-

Cat. 6 (.250”)

Front

24

78

132

192

24

78

132

192

48

48

16

Back

24

78

132

192

-

-

48

-

-

-

-

Cat. 5e (.187”)

Front

48

138

246

348

48

138

246

348

72

72

24

Back

48

138

246

348

-

-

-

-

Cable Capacity Chart for NetManager Horizontal Cable Managers

72

-

-

Fiber (3mm)

Front

120

348

618

882

Back

120

120

348

618

882

-

-

-

348

618

882

-

192

192

72

192

-

-

PatchRunner High Capacity Horizontal Cable Managers

Price

$59.85

$68.55

$99.25

$126.95

$50.35

$53.35

$81.50

$105.00

$61.20

$47.00

$34.98

- Manage cables on switches with vertical cards or for fan avoidance cable crossover

- Curved cable management fingers support cables as they transition to the vertical pathway

- PEHF versions are depth adjustable for maximum pathway utilization

- Cable pass-through holes to the back of rack

- Mount to 19” EIA racks and cabinets

- Mounting hardware included

Part #

PEHF2

PEHF3

PEHF4

Part Description

3.5”H x 18.9”W x 9.8”D*

5.2”H x 18.9”W x 9.8”D*

7.0”H x 18.9”W x 9.8”D*

Cable Capacity

No. of Rack Spaces‡ Cat6.A (0.300”)

2

3

4

92

166

240

Cat.6 (0.240”) Std. Pkg. Qty.

143

259

375

1

1

1

$106.60

$112.05

$122.00

NM4

NCMH2

NCMHF1

PEHF2

NMF4

NCMHF2

PEHF3

PEHF4

Call for Volume Discounts

73

Major Credit Cards Accepted

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

NetRunner High Capacity Vertical Cable Management System

3

2

4

1 5

- Large finger openings accommodate up to 24 Category 6A cables

- Push button dual hinged doors ordered separately can be opened 110° to the left or right to provide

complete access to the cables inside the vertical pathway

- cable retainers can be placed onto fingers to help retain cables in channel during installation/maintenance

- Vertical managers include cable retainers, mounting brackets and #12-24 screws

- For 2 post 3” channel racks and 4 post racks

Part Number Part Description

2 Post Rack

R2P*

R2PS*

84.0”H x 20.3”W x 3.0”D, aluminum

84.0”H x 20.3”W x 3.0”D, steel

1 R2PW* 84.0”H x 24.3”W x 3.0”D

High Capacity Dual Sided Vertical Managers

NRV6*

NRV10*

Dimensions: 80.4”H x 6.7”W x 13.8”D

Dimensions: 80.4”H x 10.0”W x 13.8”D

2 NRV12* Dimensions: 80.4”H x 12.0”W x 13.8”D

High Capacity Single Sided Vertical Managers

3

NRVF6*

NRVF10*

Dimensions: 80.4”H x 6.7”W x 7.48”D

Dimensions: 80.4”H x 10.0”W x 7.48”D

NRVF12* Dimensions: 80.4”H x 12.0”W x 7.48”D

High Capacity Dual Hinged Metal Doors

NRD6*

NRD10*

NRD12*

Accessories

NRVCB

Dimensions: 82.8”H x 7.4”W x 1.6”D

Dimensions: 82.8”H x 10.7”W x 1.6”D

Dimensions: 82.8”H x 12.7”W x 1.6”D

5

4

NREP

WMPV45ERTW

NetRunner High Capacity Center Mount Bracket Kit. For use with CEA-

310-E standard 2 post and Panduit 4 Post Racks.

End panel for use w/NRV series, WMPVHCF45E/WMPVHC45E.

Rack top trough with waterfall door 2 post 3” channel rack.

‡One rack space = 1.75” (44.45mm). All product color is black unless noted

# of Rack

Spaces‡

Std. Pkg.

Qty

45

45

45

45

45

45

45

45

45

45

45

45

*Free shipping not included

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

$205.00

$160.00

$205.00

$348.65

$424.35

$499.05

$265.00

$325.00

$385.00

$152.53

$158.65

$180.25

$10.05

$153.92

$119.25

Open-Access Horizontal Cable Managers

CMPHF1

CMPHF2

CMPHHF1

CMPHH2

- Rack space identification allows quick and easy location of rack mount items

- 3” Rack is UL listed for 1,000 lbs. load rating

- 6” Rack is UL listed for 1,500 lbs. load rating

- Double-sided #12-24 EIA universal mounting hole spacing

- 24 #12-24 mounting screws included

- Can be used with all Panduit cable management and patch panel products in addition to any industry

standard 19” components

- Paint piercing washers included to electrically bond rack for simplified grounding. For the complete

grounding solution, see the Structured Ground™ Kits for Racks

- 6” Rack, R2P6S is compatible with PatchRunner™ and High Capacity PatchRunner™ Products only

Part # Part Description

19” Manager, Front Only

CMPHF1

CMPHHF1

CMPHF2

CMPHH2

1.7”H x 19.0”W x 3.4”D

1.7”H x 19.0”W x 5.7”D

3.5”H x 19.0”W x 3.4”D

3.5”H x 19.0”W x 5.7”D

Cable Capacity

No. of Rack Spaces‡ Cat.6 (0.240”) Cat.5e (0.225”) Std. Pkg. Qty.

2

2

1

1

24

24

54

96

24

30

60

108

1

1

1

1

$25.75

$28.75

$43.90

$43.90

PatchLink Horizontal Wire Managers

WMP1E

WHPH2E

WMPFSE

WMPHF2E

- Rack space identification allows quick and easy location of rack mount items

- 3” Rack is UL listed for 1,000 lbs. load rating

- 6” Rack is UL listed for 1,500 lbs. load rating

- Double-sided #12-24 EIA universal mounting hole spacing

- 24 #12-24 mounting screws included

- Can be used with all Panduit cable management and patch panel products in addition to any industry

standard 19” components

- Paint piercing washers included to electrically bond rack for simplified grounding. For the complete

grounding solution, see the Structured Ground™ Kits for Racks

- 6” Rack, R2P6S is compatible with PatchRunner™ and High Capacity PatchRunner™ Products only

WMPLFSE

74

WMPSE Part #

H X W X D

Capacity*

# of Spaces

Price

WMP1E WMPFSE WMPH2E** WMPHF2E** WMPLFSE WMPSE

3.5” x 19.0” x 8.9” 1.7” x 19.0” x 3.7” 3.5” x 20.2” x 8.9” 3.5” x 20.2” x 3.7” 1.7” x 19.0” x 2.7” 1.7” x 19.0” x 8.9”

36 Front/Rear

2

$52.40

18 Front Only

1

$34.95

36 Front/Rear

2

$61.25

36 Front Only

2

$47.65

*Based off of Cat 6 (.250) Cable **Includes extended front covers & 2 bend radius clips.

12 Front Only

1

$34.95

18 Front/Rear

1

$45.50

Call for Volume Discounts

Datacomtools.com

TM

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

1. Vertical Managers

- Integral retainers on the end of each finger to

help contain cables within rack unit

- Bend radius fingers align w/rack spaces to

support as they go to a vertical pathway

- Covers can open 110° to the left/right to

provide access to cables inside.

- Retainers can be on fingers to help retain

cables during installation & maintenance

- Include hinged covers, cable retainers,

brackets & #12-24 screws

Part Number

Part Description

Depth (In.)

Height (In.)

Width (In.)

Cable Capacity - Cat 6 (.250)

No. of Rack Spaces

Price

WMPV45E WMPV22E

Front & rear vertical manager Front & rear vertical manager

11.8

80.4

4.9

131 Front and 131 Rear

45

$195.00

11.8

40.2

4.9

131 Front and 131 Rear

22

$97.50

WMPVF45E

Front only vertical manager

6.5

80.4

4.9

131 Front Only

45

$120.55

WMPVCBE Bracket kit to mount vertical cable managers between two adjacent racks $8.50

- Manage, protect, & showcase cables

between patch panels on 19” EIA racks

- Capacities are based on a fill rate of 40%

- Dual Hinged Covers conceal cable pathway &

provide easy access w/o removing the door

- For comparison, multiply by 1.25 for a fill rate of 50%

Part Number WMP1E

Part Description 3.5”H x 19.0”W x

8.9”D

Cable Capacity* 36 Front/Rear

# of Spaces

Price

2

$52.40

WMPFSE

1.7”H x 19.0”W x 3.7”D

18 Front Only

1

$34.95

WMPH2E**

3.5”H x 20.2”W x

8.9”D

36 Front/Rear

2

$61.25

WMPHF2E**

3.5”H x 20.2”W x 3.7”D

36 Front Only

2

$47.65

*Based off of Cat 6 (.250) Cable **Includes extended front covers & 2 bend radius clips.

WMPLFSE

1.7”H x 19.0”W x 2.7”D

12 Front Only

1

$34.95

WMPSE

1.7”H x 19.0”W x

8.9”D

18 Front/Rear

1

$45.50

1. PatchRunner Vertical Manager

- High density minimizes area required for network layout, freeing up floor space

- Fingers support cables as they go to the pathway removing the need for horizontal managers

- Individual fingers can be removed w/o a tool for routing of cable bundles

- Slack management spools organize patch cord slack allowing standardization of patch cords

Vertical Manager - Manage Cable on Front and Rear of Rack

PRV12

PRV8

PRV6

Vertical cable manager, Dimensions: 83.9”H x 12.0”W x 16.4”D

Vertical cable manager, Dimensions: 83.9”H x 8.0”W x 16.4”D

Vertical cable manager, Dimensions: 84”H x 6”W x 16.4”D

Vertical Manager - Manage Cable on Front of Rack Only

PRVF12 Vertical cable manager, Dimensions: 83.9”H x 12.0”W x 9.7”D

PRVF8

PRVF6

Vertical cable manager, Dimensions: 83.9”H x 8.0”W x 9.7”D

Vertical cable manager, Dimensions: 83.9”H x 6.0”W x 9.7”D

Includes 4 PRSP7 slack spools except for PRV6 and PRVF6. *One rack space = 1.75” (44.45mm).

Rack Space* Price

45

45

45

$610.00

$465.00

$415.00

45

45

45

$390.00

$335.00

$305.00

Vertical Manager - Doors

PRD12 Dual hinged metal door. Dimensions: 82.8”H x 12.1”W x 1.6”D

PRD8

PRD6

Dual hinged metal door. Dimensions: 82.8”H x 8.1”W x 1.6”D

Dual hinged metal door. Dimensions: 82.8”H x 6.1”W x 1.6”D

Rack Space* Price

45

45

45

$325.00

$205.00

$185.00

- NetManagers manage & protect cables

between patch panels on 19” EIA racks

- Capacities are based on a fill rate of 40%

- Dual Hinged Covers conceal cable pathway &

provide easy access w/o removing the door

- For comparison, multiply by 1.25 for a fill rate of 50%

Part #

NM1

NM2

NM3

NM4

NMF1

NMF2

NMF3

NMF4

NCMH2

NCMHF2

NCMHF1

Cat. 6A (.298”)

Front

18

54

96

144

18

54

96

144

-

-

-

Cable Capacity Chart for NetManager High Capacity Horizontal Cable Managers

Back

18

54

96

144

-

-

-

-

-

-

-

Cat. 6A (.289”)

Front

18

54

102

144

138

246

348

-

-

Cable Capacity Chart for NetManager Horizontal Cable Managers

-

-

-

18

54

102

144

Back

18

54

102

144

-

-

-

-

-

-

Cat. 6 (.250”)

Front

24

78

132

192

24

78

132

192

48

48

16

Back

24

78

132

192

-

-

-

48

-

-

Cat. 5e (.187”)

Front

48

138

246

348

Back

48

48

138

246

348

72

72

24

-

-

72

-

-

Fiber (3mm)

Front

120

348

618

882

Back

120

120

348

618

882

192

192

72

-

-

-

348

618

882

-

192

-

-

Price

$59.85

$68.55

$99.25

$126.95

$50.35

$53.35

$81.50

$105.00

$61.20

$47.00

$34.98

Waterfall Accessories

- Easy to install waterfall kit maintains bend radius control in both vertical and horizontal directions

- Base attaches to either the rung or stringer on most ladder racks

- Modular components let user configure each location where cable management is required

1

1

2

Racks Sold Separately

2

Racks Sold Separately

2. PatchLink

Cable Managers

2. NetManager

Cable Managers

CMW-KIT Waterfall kit. Provides bend radius control when transferring cables from ladder rack.

$35.30

CMWB

CMWW

Waterfall base. Maintains 1.75” radius when transferring cable off of ladder rack.

Waterfall wing. used with CMWB to maintain 1.00” radius when transferring cable off ladder rack.

$18.35

$9.89

Major Credit Cards Accepted

CMW-KIT CMWB

Call for Volume Discounts

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

75

Horizontal Cable Managers

WM series cable managers provide increased strength and do not interfere with panels mounted above or below. They are a popular and economical solution for providing a clean and simple means of organizing small-to-large bundles of cables and patch cords.

WM-143-5

WM-144-5

WM-145-5

1U cable manager with 5 S143 hangers

2U cable manager with 5 S144 hangers

2U cable manager with 5 S145 hangers

$40.45

$38.25

$44.75

Horizontal Cable Managers

Organize patch cords and maintain a required bend radius. Available in a wide variety of styles to suit any application. The D-Ring provides a creative solution for adding individual D-Rings to a rack or on a wall using appropriate fasteners. Select styles also available in 23” panel widths. For optimal performance, do not exceed a 50% fill rate when passing cables through cable rings. Finished in a durable black power coat.

Part #

HCM-1

HCM-1V

HCM-1D

HCM-1DV

HCM-2D

HCM-2DV

HCM-1DR

HCM-2DR

Description

1 ¾” (1 sp.) “micro-clip”

1 ¾” (1 sp.) “micro-clip” w/end D-Rings

1 ¾” (1 sp.) “D-Ring”

1 ¾” (1 sp.) “D-Ring” w/end D-Rings

3 ½” (2 sp.) “D-Ring”

3 ½” (2 sp.) “D-Ring” w/end D-Rings

1 ¾” (1 sp.) “D-Ring” front and rear

3 ½” (2 sp.) “D-Ring” front and rear

Width

19”

19”

19”

19”

19”

19”

19”

19”

Ring Fill Area

⅞”²

⅞”²

3 ⅛”²

3 ⅛”²

7 ½”²

6 ¼”²

15”²

7 ½”²

Price

$19.60

$34.75

$24.50

$34.75

$26.45

$37.50

$32.35

$42.50

Hinged Horizontal Cable Managers

Conceal patch cables while providing cable strain relief with the new hinged horizontal wire managers. These

19” wire managers provide a strong method for organizing patch cords and maintaining the bend radius. the latching hinged front panel conceals cables dressed between components and cable chases.

HHCM-1

HHCM-2

1 3/4” (1 space) Hinged Horizontal Cable Manager

3 1/2” (2 space) Hinged Horizontal Cable Manager

$32.35

$36.45

Lacing Bars & Panels

Made for 1/4” diameter rod with flattened ends (model LBP-1R, LBP-1.5 and LBP-1R4) or 3/16” thick aluminum (model LBP-1S), & finished in a black coat, each bar provides convenient cable tie points. Model

LBP-1R4 features a 4” offset & model LBP-1.5 features a 1 1/2” offset. Model LBP-1A, LBP-2A, LBP-4A and

LBP-6A feature a formed “L” shape, cable tie slots, & are offered in straight and 2”, 4”, and 6” offset models.

Covers, #12-24 and M6 mounting screws included.

Use the LBP-LTF when lacing large amounts of cable of mounting devices. Two rackspaces high, the LBP-LTF features a large flange, numerous cable tie points. (Lacer Panel sold in packs of 10)

Part Number

LBP-1R

LBP-1S

LBP-1A

LBP-2A

LBP-4A

LBP-6A

LBP-1.5

LBP-1R4

Lacer Bar Description

Round Rod

Rectangular Bar

“L” Bar

“L” Bar 2” Offest

“L” Bar 4” Offset

“L” Bar 6” Offset

1.5” Offset Round Rod

4” Offset Round Rod

Length

19”

19”

19”

19”

19”

19”

19”

19”

Price

$38.90

$38.90

$24.90

$42.70

$47.50

$53.95

$56.00

$62.35

76

Vertical Lacing Strips

Perforated steel lacer strips mount vertically to rackrail brackets and provide many locations for securing cable ties. Lacer strips can be cut down easily to smaller sizes. LACE-OWP and LACE-OP strips with tie posts for sliding on pre-wrapped cable bundles using 3/4” hook and loop straps or cable ties. Some lacer strips also accept cage nuts or mounting of select power strips for increased versatility. All strips sold in packs of 6

Part Number Description

LACE-44-OWP 4 3/4” width, 44 space w/tie post

LACE-40-OWP 4 3/4” width, 40 space w/tie post

LACE-37-OWP 4 3/4” width, 37 space w/tie post

LACE-44-OP

LACE-40-OP

LACE-37-OP

LACE-44LP

LACE-37LP

LACE-P

LACE-37P

LACE-44-1SP

LACE-37-1SP

LACE-44-1P

LACE-37-1P

3 1/4” width, 44 space w/tie post

3 1/4” width, 40 space w/tie post

3 1/4” width, 37 space w/tie post

3 1/2” width, 44 space w/tie post

3 1/2” width, 37 space w/tie post

2” width, 45 space, 1/8” thick w/round holes

2” width, 37 space, 1/8” thick w/round holes

1” width, 44 space w/10 pre-installed tie saddles

1” width, 37 space w/10 pre-installed tie saddles

1” width, 44 space tapped for tie saddles

1” width, 37 space tapped for tie saddles

Compatible Cable Management Options

Cable Ties TSW-15

TW-12

-

-

Included

Included

-

-

-

-

-

-

-

-

-

-

-

-

Cage Nuts

-

Price

$160.00

$155.00

$149.00

$139.50

$134.25

$128.95

$159.00

$139.00

$90.50

$82.95

$165.00

$154.00

$90.50

$82.95

Call for Volume Discounts

Datacomtools.com

TM

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

NextFrame Horizontal Cable Management

NEXTFRAME® reduces installation time to the barest minimum, because components easily snap together. All NEXTFRAME® components are secure, rugged, and reliable.

NEXTFRAME® relies solely on steel construction: no plastic parts to wear or break. NEXTFRAME provide unmatched flexibility. The flexibility of this system allows for upgrades as your cross connect needs change.

NEXTFRAME® adapts to changing cable volumes and transition locations, always providing a T568 compliant structure for organizing incoming backbone cabling and patch cords.

Basic NEXTFRAME® components assembled on-site built particular organizers to meed special installation needs. The assemble-to-order nature of NEXTFRAME® also means that you pay only for the features you need as you need them.

Duct Panels

Features/Benefits

- 7-rings

- 6 pass-through holes.

- Hinged front cover.

- Conceals patch cords & enhances

the network appearance.

Enhanced Panels

Features/Benefits

- 7-rings

- 6 pass-through holes.

- These panels can be upgraded

through the use of accessories.

19”

19”

19”

19”

19”

19”

19”

Rack

Width

19”

19”

19”

19”

19”

19”

2U

2U

2U

2U

2U

3U

3U

Rack

Units

1U

1U

1U

1U

2U

2U

Panel

Height

1.75”

1.75”

1.75”

1.75”

3.50”

3.50”

3.50”

3.50”

3.50”

3.50”

3.50”

5.25”

5.25”

Ring

Depth

1.75”

3.50”

3.50”

6.00”

1.75”

3.50”

3.50”

3.50”

6.00”

3.50”

3.50”

3.50”

6.00”

Cable Manager with Wire Saddles

Delivery:

1 - Panel assembly with cover(s),

4 - #12-24 x 5/8” dog-nosed screws

4 - #12 nylon flat washers

Ring

Depth

-

-

6.00”

-

-

-

6.00”

6.00”

-

4.6”

4.6”

-

-

Catalog No.

HC119CE1N

HC119CE3H1

HC119GC363

HC119CE6H1

HC219CE1N

HC219CE3N

HC219GC363

HC219GC36P4

HC219CE6N

HC219CR3N2

HC219CC3N3

HC319CE3N

HC319CE6N

Rack Units

2U

1U

Height Ring

3.50”

1.75”

Depth

3”

3”

Catalog No.

HC219ME3S

HC119ME3S

$68.45

$68.05

$145.00

$68.05

$64.20

$60.25

$132.35

$144.00

$84.85

$80.65

$89.05

$93.15

$95.25

$76.20

$50.95

Rack

Width

19”

19”

19”

19”

19”

19”

Rack

Units

1U

1U

2U

2U

3U

3U

Panel

Height

1.75”

1.75”

3.50”

3.50”

5.25”

5.25”

Basic Panels

Features/Benefits

- 4-rings.

- Solid panel.

- Use when accessories or pass-thru

holes are not required.

Front

Ring

3.50”

6.00”

3.50”

6.00”

3.50”

6.00”

Rear Depth

Rings

No

No

No

No

No

No

Catalog No.

HC119ME3N

HC119ME6N

HC219ME3N

HC219ME6N

HC319ME3N

HC319ME6N

$58.80

$60.95

$58.80

$63.25

$65.00

$67.25

Rack

Width

19”

19”

19”

19”

23”

Rack

Units

1U

1U

2U

2U

2U

Panel

Height

1.75”

1.75”

3.50”

3.50”

3.50”

Front Ring

Depth

1.75”

3.50”

1.75”

3.50”

1.75”

Rear Rings

No

No

No

No

No

Catalog No.

HC119MS1N

HC119MS3N

HC219MS1N

HC219MS3N

HC223MS1N

$38.00

$40.15

$40.15

$38.65

$78.50

Horizontal Cable Management Accessories

Front/Rear Cover

- Locks in place when

completely open to prevent

cover from being removed.

- Snaps open and closed, no

fasteners to lose or break.

- Easily removed & replaced

during moves & changes.

The hinged cover can be used on the front and/or rear of the Enhancedstyle NEXTFRAME™ horizontal cable management system.

Vertical Management Rings

- Mounts to front of 2U and 3U panels or can be

mounted directly to rack mounting rails - front

or rear.

1U/1.75”

HC119C $23.35

2U/3.50”

HC219C $25.20

3U/5.25”

HC319C $29.80

Plastic Finger Duct Organizer

Plastic duct-style horizontal cable organizers are the traditional solution for storing and routing jumpers and patch cords on a 19” equipment rack. The slots in the finger duct accommodate precise routing of patch cords.

Delivery: 1 - Panel assembly with cover(s), 4 - #12-24 x 5/8” dog-nosed screws, 4 - #12 nylon flat washers

Rack Units Height Front Duct

Depth

2U

2U

1U

1U

3.50”

3.50”

1.75”

1.75”

3”

3”

3”

3”

Rear Duct

Depth

5”

None

5”

None

Catalog No.

HC219CC3P $105.45

HC219CE3P $82.80

HC119CC3P $84.85

HC119CE3P $68.45

3.50” (89) 6” (152)

HC23VR2 $35.95

HC26VR $41.95

Plastic Cable Management Rings

- Adhesive or non-adhesive versions.

- Use for patch cord cable management.

Delivery: 4 rings.

Non-adhesive Adhesive

MCCPSR4 $24.85 MCCPSRA4 $39.40

Major Credit Cards Accepted

Rear Wire Frame

- Rugged, non-flammable, won’t wear or break

like plastic.

- Easy access, allowing patch cords to connect at

rear of hubs.

- Round rod design prevents cable from chafing.

4.6”

HC33WF

6”

$49.95

HC36WF

Extender Brackets, 23”

$49.95

- Brackets occupy 2 rack units.

- For use with patch panels and cable management

panels.

Delivery: 2 brackets, 1 kit of mounting hardware.

BREXTB235

Call for Volume Discounts

$38.75

77

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

Versi-Duct Management

Vertical Management

Horizontal Management

Versi-Duct 8” Channel Cable Management

- Ideal for today’s large-scale deployments & CAT 6A installations w/larger dia. cable

- 80” Channel ships in 40” pieces for easier handling and installation

- Channels available with standard or new designer cover

- Channels include cover, slack spools, and cable retainers and mounting brackets

- Included cover features unique, integrated dual-hinge for easy accessibility

- Same channels can be side or center mounted for better space utilization

Versi-Duct 5” Channel Cable Management

- Versatile accessories allow unique installation configurations

- 80” Channel now ships in two 40” pieces for easier handing and installation

- Interlocking tabs maintain flush channel alignment

- Finger spacing aligns with rack units.

Determine which Versi-Duct size meets your needs using this capacity chart.

Find your cable type, and then select 5” or 8” Versi-Duct based on current fill rate and future expansion needs. TIA recommends using a maximum of 40% for total capacity. To allow for future growth, 50% fill rate is shown

CAT 6A (.354”)

Versi-Duct Capacity (In Numbers of Cables)

5” Channel Size (per side)

8” Channel Size (per side)

5” x 4” 61

8” x 8” 182

76

229

CAT 6 (.250)

122

366

153

459

CAT 5E (.180”)

236

708

295

885

Versi-Duct Channel Vertical Cable Management 8”

8980L-VFO

8980L-VFR

8C80L-VFO

8C80L-VFR

89265-BKT

Vertical 80” L, 8” W x 8” D channel w/standard hinged black cover, front only $275.50

Vertical 80” L, 8” W x 8” D channel w/standard hinged black cover, front & back $349.75

Vertical 80” L, 8” W x 8”D channel w/designer hinged grey cover, front only $275.50

Vertical 80” L, 8” W x 8”D channel w/designer hinged grey cover, front & back $349.00

Vertical Center Mounting Bracket, 8” Channel

Vertical Wire Retainer, 8” Channel

Vertical Slack Loop Organizer, 8” Channel

$21.80

$13.50

$13.50

89265-WR1

89265-SL1

Versi-Duct Channel Vertical Cable Management 5”

4980L-VFO

4980L-VFR

4940L-VFO

4940L-VFR

Vertical 80” L, 5”W x 4”D Channel w/standard snap-on black cover, front only $103.45

Vertical 80” L, 5”W x 4”D Channel w/standard snap-on black cover, front & back $158.00

Vertical 40” L, 5”W x 4”D Channel w/standard snap-on black cover, front only $43.65

Vertical 40” L, 5”W x 4”D Channel w/standard snap-on black cover, front & back $66.25

$35.25

$12.55

49265-5VC

49265-BKT

Vertical Designer cover, 5” channel snap-on grey

Mounting bracket, 5” Channel

Versi-Duct Horizontal Cable Management & Accessories

492RU-HFO

492RU-HFR

491RU-HFO

491RU-HFR

Horizontal Manager, 2RU, 3”W x 3”D front, 2”W x 4”D rear*, front only

Horizontal Manager, 2RU, 3”W x 3”D front, 2”W x 4”D rear*, front & back

Horizontal Manager, 1RU, 1.5” W x 3”D front, 1.5” W x 4”D rear*, front only

Horizontal Manager, 1RU, 1.5” W x 3”D front, 1.5” W x 4”D rear*, front only

$30.10

$39.15

$25.95

$33.65

Horizontal Cable Managers

Horizontal Cable Managers

- Available in 1RU and 2RU Sizes

- All mount to standard 19” racks and cabinets

- Horizontal Managers support transition to vertical management

- Combo managers offer front and rear management

78

49253-LPM

49253-BCM

49253-2CM

Horizontal Manager, 1RU, 4” metal rings

Horizontal Manager, 2RU, 4” metal rings

Horizontal Manager, 2RU, 2” metal rings

$29.45

$42.75

$40.25

Call for Volume Discounts

Datacomtools.com

TM

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

Vertical Power Strips

Contents: 1 strip, 1 kit mounting hardware, universal mounting brackets

Electrical Specification Receptacle

15A-120V

20A-120V

15A-120V

20A-120V

20A-120V

20A-120V

20/16A-120/250V

30/24A-250V

Type

NEMA 5-15R

NEMA 5-20R

NEMA 5-15R

NEMA 5-20R

NEMA 5-20R

NEMA 5-20R

30A-120V NEMA 5-20R

20/16A/circuit 120V NEMA 5-20R

IEC 320C-13

IEC 320C-13

Outlets

Front

10

10

20

20

20

24

20

20

20

20

Plug Type

NEMA 5-15P

NEMA 5-20P

NEMA 5-15P

NEMA 5-20P

NEMA 5-20P

NEMA 5-20P

NEMA L5-30P

NEMA 5-20P

IEC 320 C20

NEMA L6-30P

No. of

Circuits

1

1

1

1

1

1

1

1

1

2

Surge

Protected

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

Yes

Switch Current

Monitor

No

No

No

No

No

No

No

Yes

No

No

No

No

Catalog No.

PR104

PR10420

PR206

PR20620

PR20620TL**** $242.50

PR20820DRTL* $610.00

PR20830

PR20820A**

PR20820I***

PR24

$165.00

$260.00

$215.00

$325.00

$445.00

$380.75

$380.00

$545.00

*PR20820DRTL features a digital current meter and a 20A Twist-Lock® plug.

**PR20820A features (2) 20A circuits each fed by 10’ cable with NEMA 5-20 plug.

***PR20820I includes an IEC 320 (C-20) inlet for power input.

****PR20620TL includes a Twist-Lock® plug.

Mounting Brackets for Vertical Power Strips

L-brackets: turned “in” for rack/rail mounting; turned “out” extend mounting options an additional 8”

For left, right, front or back rail mounting; may be installed in conjunction with other equipment mounted in the same “U” space

PRSLB4

PREZB

$20.70

$22.00

Horizontal Power Strips

Delivery: 1 strip, 1 kit mounting hardware

Electrical

Specification

15A-120V

15A-120V

15A-120V

20A-120V

Receptacle

Type

Outlets

Front Rear Mounting

NEMA 5-15R 0

NEMA 5-15R 0

NEMA 5-15R 4

NEMA 5-20R 0

20/16A, 120/250V IEC 320C-13 10

15A-120V

20A-120V

60A-250V

NEMA 5-15R

NEMA 5-20R

IEC 320C-19

0

0

0

10

10

4

10

Style

Flush

Flush

Recess

Flush

Flush 0

6

10

Flush

Flush

3 Adjustable

Surge

Protected

No

Yes

Yes

No

No

No

No

No

Transformer Spaced

No

No

Yes

No

No

No

No

N/A

Switch Current

Monitor

Yes

Yes

No

No

No

No

No

No

Yes Yes

CB/Switch No

No

No

No

No

Part #

HPWPWR $88.45

MCCPSS19 $165.00

MCCPSS19TS $195.00

PR10120

PR10720*

PR0615

PR1020

$235.00

$210.00

$84.35

$530.00

PR0360** $1305.00

*PR10720 includes an IEC 320 (C-20) inlet for power input. Vertical mount brackets are also included.

**PR0360 features 10’ cable with IEC 60A 2P/3W plug.

Mounting Brackets for Horizontal Power Strips

Adjustable mount brackets; allows numerous recess or flush mount options.

Panel mount brackets; ideal for zero ‘U’ mounting applications by effectively allowing the unit to be hung from a cross beam or flat surface.

PRAMB

PRPMB

$33.65

$17.35

Basic Rack PDU

Best value for simple power distribution

APC Basic Rack PDUs provide reliable power distribution via a single input with multiple output receptacles and distributes power from low amperage single phase circuits to higher-power 3-phase solutions.

A B

100V, 120V Input

A Rack PDU, Zero U, 20A, 120V, (24)5-20

A Rack PDU, Zero U, 30A, 120V, (24) 5-20

A Rack PDU, Zero U, 20A, 120V, (14)5-15

B Rack PDU, 1U, 30A, 120V, (10)5-20

B Rack PDU, 1U, 15A, 120V, (10)5-15

B Rack PDU, 1U, 20A, 120V, (10)5-20; 5-20P

B Rack PDU, 1U, 20A, 120V, (10)5-20; L5-20P

AP7530 $232.50

AP7532 $288.75

AP9551 $152.50

AP9560 $216.25

AP9562 $83.75

AP9563 $128.75

AP9564 $128.75

AP9567 $153.75

B Rack PDU, Zero U, 15A, 100/120V, (14) 5-15

120V, 208V Input

B

B

Rack PDU Extender, 2U, 30A, 100/120/200/208V, (4)L5-20

Rack PDU Extender, 2U, 30A, 100/120/200/208V, (4)L5-30

AP7580 $393.75

AP7583 $393.75

200V, 208V, 230V Input

A Rack PDU, ZeroU,14.4kW,208V,C13,(4)C19,(2)L6-30R;10’ Cord AP7599 $882.50

A Rack PDU, Zero U, 11 KW, 230V, (36) C13 & (6) C19

A Rack PDU, Zero U, 20A, 208V, (20)C13 & (4)C19

A Rack PDU, Zero U, 30A, 200/208V, (20)C13 & (4)C19

A Rack PDU, Zero U, 16A, 230V, (20) C13 & (4) C19; IEC C20

B Rack PDU Extender, 2U, 30A, 200/208V, (4)L6-20

AP7557NA $655.00

AP7540 $232.50

AP7541 $282.50

AP7552 $232.50

AP7581 $393.75

Major Credit Cards Accepted

B Rack PDU Extender, 2U, 30A, 120V, (12)5-20

B Rack PDU Extender, 2U, 30A, 200/208V, (4)L6-30

B Rack PDU, 1U, 16A,208&230V, (10)C13 & (2)C19

B Rack PDU, 1U, 16A, 208/230V, (12)C13

B Rack PDU, 1U, 16A, 208V, (12)C13

B Rack PDU, Zero U, 10A,230V, (15)C13

B Rack PDU, 1U, 30A, 208V, (4) C19s

B Rack PDU, 1U, 30A, 208V, (10) C13

B Rack PDU, Zero U, 16A, 208/230V, (15) C13

208V 3PH Input

B

A

A

A

A

A

Rack PDU, 1U, 14.4kW, 208V, (6) C19

Rack PDU, Zero U, 5.7kW, 120V, (42)5-20

Rack PDU, Zero U,5.7kW,120&208V,(21)5-20 & (6)L6-20

Rack PDU, Zero U, 5.7kW, 208V, (36)C13 & (6)C19

Rack PDU, Zero U, 14.4kW, 208 V, (6) C19 & (3) C13

Rack PDU,Zero U,12.5kW,208V,(30)C13,(6)C19;3’ Cord

AP7582

AP7584

AP9559

AP9565

AP9566

AP9568

AP9570

AP9572

$392.50

$393.75

$187.50

$128.75

$128.75

$153.75

$216.25

AP9571A $210.00

$191.25

AP7516 $565.00

AP7562 $287.50

AP7563 $288.75

AP7564 $288.75

A Rack PDU, Zero U,14.4kW,208V,C13,(4)C19,(2)L6-30R;3’ Cord AP7569 $867.50

A Rack PDU,ZeroU,5.7kW,120V,(42)5-20; 10’ Cord

A Rack PDU,Zero U,12.5kW,208V,(30)C13,(6)C19;10’ Cord

AP7567 $707.50

AP7568 $573.75

AP7592

AP7598

$293.75

$588.75

Call for Volume Discounts

79

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

NetShelter SX

NetShelter SX 42U 600mm Wide x 1070mm Deep Enclosure

Standard enclosure for low to medium density server & networking applications. Compact width to optimize data center space. 42U height to easily roll through doorways.

Includes: Baying hardware,

Documentation CD, Key(s),

Keyed-alike doors and side panels,

Leveling feet, Mounting Hardware,

Pre-installed casters, Side Panels

NetShelter SX 45U 600mm Wide x 1070mm Deep Enclosure with

Sides Black

Feature-rich enclosures optimized for easy installation, managing cables, integrating power distribution, & maximizing airflow.

Includes: Baying hardware, Key(s),

Keyed-alike doors and side panels,

Leveling feet, Mounting Hardware,

Pre-installed casters, Side Panels,

User Manual

NetShelter SX 48U 600mm Wide x 1070mm Deep Enclosure

Tall enclosure with 48U spaces for additional equipment. Compact width to optimize data center space. For low to medium density server & networking applications.

Includes: Baying hardware,

Documentation CD, Key(s),

Keyed-alike doors and side panels,

Leveling feet, Mounting Hardware,

Pre-installed casters, Side Panels

Net Weight

Maximum Height

Maximum Width

Maximum Depth

Weight Capacity (static load)

Weight Capacity (dynamic load)

Minimum Mounting Depth

Maximum Mounting Depth

Rack Height

Rack Width

Color

AR3100

275.20lbs.

78.39”

23.62”

42.13”

3000.00lbs.

2250.00 lbs.

7.52”

36.02”

42U

19”

Black

$1245.00

NetShelter SX 42U 750mm Wide x 1070mm Deep Enclosure

Wide enclosure with increased cable management options for high density server & networking applications. 42U height to easily roll through doorways.

Includes: Baying hardware,

Documentation CD, Key(s),

Keyed-alike doors and side panels, Leveling feet, Mounting

Hardware, Pre-installed casters,

Side Panels

Net Weight

Maximum Height

Maximum Width

Maximum Depth

Weight Capacity (static load)

Weight Capacity (dynamic load)

Minimum Mounting Depth

Maximum Mounting Depth

Rack Height

Rack Width

Color

AR3105

301.40lbs.

83.62”

23.62”

42.13”

3000.00lbs.

2250.00lbs.

7.52”

36.02”

45U

19”

Black

$1365.00

NetShelter SX 45U 750mm

Wide x 1070mm Deep

Enclosure with Sides Black

Feature-rich enclosures optimized for easy installation, managing cables, integrating power distribution, & maximizing airflow.

Includes: Baying hardware,

Key(s), Keyed-alike doors and side panels, Leveling feet,

Mounting Hardware,

Pre-installed casters, Side

Panels, User Manual

Net Weight

Maximum Height

Maximum Width

Maximum Depth

Weight Capacity (static load) 3000.00lbs.

Weight Capacity (dynamic load) 2250.00lbs.

Minimum Mounting Depth

Maximum Mounting Depth

Rack Height

Rack Width

Color

AR3107

304.10lbs.

88.90”

23.62”

42.13”

7.52”

36.02”

48U

19”

Black

$1219.00

NetShelter SX 48U 600mm Wide x 1200mm Deep Enclosure

Feature-rich enclosures optimized for easy installation, managing cables, integrating power distribution, & maximizing airflow.

Includes: Baying hardware,

Documentation CD, Key(s),

Leveling feet, Mounting Hardware,

Pre-installed casters, Side Panels,

User Manual

Net Weight

Maximum Height

Maximum Width

Maximum Depth

Weight Capacity (static load)

Weight Capacity (dynamic load)

Minimum Mounting Depth

Maximum Mounting Depth

Rack Height

Rack Width

Color

AR3150

343.10lbs.

78.39”

29.53”

42.13”

3000.00lbs.

2250.00lbs.

10.31”

36.02”

42U

19”

Black

$1535.00

Fixed Shelf 50lbs/22.7kg Black

Net Weight

Maximum Height

Maximum Width

Maximum Depth

Weight Capacity (static load) 3000.00lbs.

Weight Capacity (dynamic load) 2250.00lbs.

Minimum Mounting Depth

Maximum Mounting Depth

Rack Height

Rack Width

Color

AR3155

341.00lbs.

83.62”

29.53”

42.13”

10.31”

36.02”

45U

19”

Black

$1655.00

Fixed Shelf 250lbs/114kg Black

Net Weight

Maximum Height

Maximum Width

Maximum Depth

Weight Capacity (static load)

Weight Capacity (dynamic load)

Minimum Mounting Depth

Maximum Mounting Depth

Rack Height

Rack Width

Color

AR3307

Sliding Shelf 100lbs/45.5kg Black

329.00lbs.

88.90”

23.62”

47.24”

3000.00lbs.

2250.00 lbs.

7.52”

41.73”

48U

19”

Black

$1925.00

Adjustable Shelf 250lbs 16-24” Black

80

AR8105BLK $59.99

Call for Volume Discounts

AR8122BLK $99.99

AR8123BLK

Free Shipping not included on APC Cabinets

Datacomtools.com

TM

$209.99

AR8125 $119.99

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

NetShelter SX

NetShelter SX 42U 600mm

Wide x 1200mm Deep

Enclosure

Feature-rich enclosures optimized for easy installation, managing cables, integrating power distribution, and maximizing airflow.

Includes: Baying hardware,

Documentation CD, Key(s),

Leveling feet, Mounting

Hardware, Pre-installed casters,

Side Panels, User Manual

NetShelter SX 45U 600mm

Wide x 1200mm Deep Enclosure with Sides Black

Feature-rich enclosures optimized for easy installation, managing cables, integrating power distribution, and maximizing airflow.

Includes: Baying hardware,

Key(s), Keyed-alike doors and side panels, Leveling feet,

Mounting Hardware, Pre-installed casters, Side Panels, User

Manual

NetShelter SX 48U 750mm Wide x 1070mm Deep Enclosure

Tall and wide enclosure with 48U spaces for additional equipment and increased cable management options for high density server and networking applications.

Includes: Baying hardware,

Documentation CD, Key(s), Keyedalike doors and side panels,

Leveling feet, Mounting Hardware,

Pre-installed casters, Side Panels

Net Weight

Maximum Height

Maximum Width

Maximum Depth

Weight Capacity )static load) 3000.00lbs.

Weight Capacity (dynamic load) 2250.00lbs.

Minimum Mounting Depth

Maximum Mounting Depth

Rack Height

Rack Width

Color

AR3300

295.00lbs.

78.39”

23.62”

47.24”

7.52”

41.26”

42U

19”

Black

$1620.00

Net Weight

Maximum Height

Maximum Width

Maximum Depth

Weight Capacity (static load) 3000.00lbs.

Weight Capacity (dynamic load) 2250.00lbs.

Minimum Mounting Depth

Maximum Mounting Depth

Rack Height

Rack Width

Color

AR3305

310.20lbs.

83.62”

23.62”

47.24”

7.52”

41.26”

45U

19”

Black

$1745.00

Net Weight

Maximum Height

Maximum Width

Maximum Depth

Weight Capacity (static load) 3000.00lbs.

Weight Capacity (dynamic load) 2250.00lbs.

Minimum Mounting Depth

Maximum Mounting Depth

Rack Height

Rack Width

Color

AR3157

372.00lbs.

88.90”

29.53”

42.13”

10.31”

36.02”

48U

19”

Black

$1825.00

NetShelter SX 42U 750mm Wide x 1070mm Deep Networking

Enclosure with Sides directors.

NetShelter SX Networking

Enclosure expands APC’s superior

IT enclosure line with improved support for high density networking applications. Integrated high density cable managers and improved cable access roof provide support for large cable bundles.

When combined with the Side

Airflow Duct Kit, the Networking

Enclosure ensures complete isolation of cold intake and hot exhaust air for large switches and SAN

Includes: Baying hardware, Documentation CD, Key(s),

Keyed-alike doors and side panels, Leveling feet, Mounting

Hardware, Pre-installed casters, Side Panels, User Manual,

Vertical cable managers

NetShelter SX 42U 750mm

Wide x 1200mm Deep

Networking Enclosure w/Sides

NetShelter SX Networking

Enclosure expands APC’s superior IT enclosure line with improved support for high density networking applications. Integrated high density cable managers and improved cable access roof provide support for large cable bundles. When combined with the Side Airflow Duct Kit, the

Enclosure ensures complete isolation of cold intake and hot exhaust air for large switches and SAN directors.

Includes: Baying hardware, Documentation CD, Key(s),

Keyed-alike doors and side panels, Leveling feet,

Mounting Hardware, Pre-installed casters, Side Panels,

User Manual, Vertical cable managers

Net Weight

Maximum Height

Maximum Width

Maximum Depth

Weight Capacity (static load) 3000.00lbs.

Weight Capacity (dynamic load) 2250.00lbs.

Minimum Mounting Depth

Maximum Mounting Depth

Rack Height

Rack Width

Color

AR3140

343.09lbs.

78.39”

29.53”

42.13”

11.00”

32.25”

42U

19”

Black

$2105.00

Net Weight

Maximum Height

Maximum Width

Maximum Depth

Weight Capacity (static load) 3000.00lbs.

Weight Capacity (dynamic load) 2250.00lbs.

Minimum Mounting Depth

Maximum Mounting Depth

Rack Height

Rack Width

Color

AR3340

355.00lbs.

78.39”

29.53”

47.24”

11.00”

37.75”

42U

19”

Black

$2230.00

Sliding Shelf 200lbs/91kg Black Double Sided Fixed Shelf for

2-Post Rack 250 lbs Black

NetShelter SX 48U 750mm

Wide x 1200mm Deep

Networking Enclosure w/Sides

NetShelter SX Networking

Enclosure expands APC’s superior IT enclosure line with improved support for high density networking applications.

Integrated high density cable managers and improved cable access roof provide support for large cable bundles. When combined with the Side Airflow

Duct Kit, the Networking

Enclosure ensures complete isolation of cold intake and hot exhaust air for large switches and SAN directors.

Includes: Baying hardware, Documentation CD, Key(s),

Keyed-alike doors and side panels, Leveling feet,

Mounting Hardware, Pre-installed casters, Side Panels,

User Manual, Vertical cable managers

Net Weight

Maximum Height

Maximum Width

Maximum Depth

Weight Capacity (static load) 3000.00lbs.

Weight Capacity (dynamic load) 2250.00lbs.

Minimum Mounting Depth

Maximum Mounting Depth

Rack Height

Rack Width

Color

AR3347

408.00lbs.

88.90”

29.53”

47.24”

11.00”

37.75”

48U

19”

Black

$2039.00

17” Keyboard Drawer Black 19” Rotating Keyboard Drawer Black

AR8128BLK $399.99

Free Shipping not included on APC Cabinets

AR8422 $89.99

Major Credit Cards Accepted

AR8126ABLK $229.99

AR8127BLK $369.99

Call for Volume Discounts

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

81

U2 Rackmount Shelf Hinged Plexiglass Security Covers

These Easy-to-install universal shelves accommodate components up to 17 3/8” wide. Made from 16-gauge steel, finished in a durable black powder coat and individually boxed.

Incorporating a steel frame and a keylocked 3/16” smoked-gray plexiglass door, our SECL Series locking security covers are offered in 2, 3, 4, and 8 space sizes. Each unit’s depth of

1 1/2” easily clears controls on most equipment.

Part #

U1

U2

U3

U4

Racking Height

5 1/4” (3 Space)

7” (4 Space)

Overall Depth

14 9/16”

15 1/2”

Usable Depth

14 3/8”

15 5/16”

Weight

70lbs.

85lbs.

Price

$28.75

$42.50

$52.65

$58.35

SECL-2 Hinged plexiglass security covers 3 1/2” (2 space) $57.65

SECL-3

Hinged plexiglass security covers 7” (4 space)

SECL-8 Hinged plexiglass security covers 14” (8 space)

$67.07

$94.70

Vented 2 Space Center-Mount Rackshelf

Ideal for use in our open frame racks. Constructed from 16gauge steel & finished in durable black powder coat

Depth 18”

Height 3 1/2” (2 space)

Weight 50lb

Fixed Writing/Computer Keyboard Shelf

The FWS fixed single bay writing/ computer keyboard shelf bolts quickly to any 19” rack to create an ideal workspace. it occupies 2 rackspaces and comes complete with special rail-mounting hardware.

Depth: 18” Capacity: 100lbs

Fixed writing/computer keyboard shelf $101.45

U2MS Vented 2 Space Center-Mount Rackshelf $74.50

FWS

Vented 3 Space Rackshelf

Vertical Wall Mount Panel

- Can accommodate all depths of equipment

- Mounts horizontally/vertically for versatile placement

- Heavy duty threaded rackrail

- Available in 2, 3 or 4 rackspace models

17 3/4” deep by 5 1/4” high, this vented rackshelf has a 60lb. weight capacity and a rear flange slotted for horizontal cable management.

Constructed from 16-gauge steel and finished in a black powder coat.

D: 17 3/4” W: 17.44” H: 5 1/4” (3 spaces) Capacity: 60lbs

U317 Vented 3 space rackshelf $70.79

VPM-2

VPM-3

VPM-4

2 space, vertical wall mount panel

3 space, vertical wall mount panel

4 space, vertical wall mount panel

$72.05

$80.19

$88.23

Wall Mount Shelf

EZ Mount Network Shelf

The EZ Mount Network Shelf is the premier product of iNNOdata, LTD. It is the very first product of its kind to allow complete installation of a small LAN/Telecom network (up to 48 drops - expandable to a maximum of 96 drops) in an extremely limited space. It saves Space, Time and Money!

WMS-20 Wall mount shelf

Wall mounting non-rackmount components is much easier with our fully welded WMS wall mount shelf. The bottom is vented to help keep things cool and features 1/2” and 3/4” electrical knockouts for cable pass-through.

Depth: 17” Capacity: 200lbs.

$105.10

Wide Unit Shelf System

Includes:

- (8) 10-32 Screws

- Mounting Template

- (1) Ground Screw - (4) 6” Velcro Strips - Blank Plate

- Slots provided on shelf deck for tie-down w/velcro straps

EZMS EZ Mount Network Shelf $199.00

EZ Mount Wall Swivel Bracket

The EZ Mount Wall Swivel Bracket was finally created after many suggestions from contractors and end users alike. It is the best solution for mounting up to a 48 port patch panel on a wall. It swivels within its own space, and, provides a solid punchdown surface, without the technician having to support the punchdown process with the other hand!

Includes:

- (8) 10-32 Screws - (4) 12-24 Screws - Ground Screw - Locking Positions

- (1) each left and right hand bracket with swivel assemblies, rear wire manager.

$85.00

EZMBL EZ Mount Wall Swivel Bracket

Call for Volume Discounts

82

Datacomtools.com

TM

Accommodating components too wide to fit the 17 3/8” inside width of standard rackshelves, these shelf systems fit units up to 22 1/2” wide, and either bolt into millwork or to the mounting angle of standard rackrail.

Measuring 5 1/4” high, this shelf saves room by requiring no rackspaces. The WUSS system comes complete with a pair of ears, a bottom, and appropriate assembly hardware.

NOTE: This rackshelf works with all Middle Atlantic Product enclosures with the exception of the VMRK-54, which uses ‘Z-Rail’.

Part #

WUSS11.5

WUSS14*

WUSS15.5

WUSS17.5

WUSS20.5

Depth

11 1/2”

Capacity

50lbs

*Available in 14” depth - fits DWR Series and other shallow racks!

Price

$65.61

$63.88

$65.61

$68.46

$73.04

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

OneTouch AT Network Assistant

The OneTouch™ AT Network Assistant is an all-in-one Gigabit Ethernet troubleshooter for copper, fiber optic and Wi-Fi networks. It provides a client view of network performance so you can resolve problems fast and complete deployment projects on time.

- Reduce troubleshooting time with a one touch AutoTest and an intuitive user interface

- Identify the source of a network problem by measuring the performance of essential net

work infrastructure and services

- Increase the troubleshooting expertise of your network support staff with standardized

test profiles tailored to your network, services and users

- Resolve the most difficult problems faster by streamlining collaboration between your

support staff, consultants & manufacturers by utilizing inline packet captures and

remote control

- Deploy network infrastructure & services more efficiently & validate and optimize its

performance with a comprehensive AutoTest & Veri-Fi wireless LAN operational

performance test

All-in-one

The OneTouch AT incorporates two 10/100/1000 Mbps RJ-45 Ethernet test ports, two 100/1000

Mbps SFP fiber optic transceiver ports and an internal 802.11 a/b/g/n dual band radio. Test your wired Ethernet & wireless Wi-Fi networks & easily compare performance with side-by-side results.

Solve complex issues

Capture traffic when a packet-level view is required to solve a network or application issue. Filter the traffic to capture what is most important. Export the capture file via the management port or SD card to your favorite protocol analyzer for decoding and analysis.

Performance measurement from the cable to the cloud

The cause of a network problem can be elusive. The OneTouch AT identifies problem root cause by measuring and analyzing the performance of the critical network components: the network cabling, the delivery of Power over

Ethernet, the connection to the nearest switch, the connection to the nearest access point, and the performance of key network services and applications.

Tap into the relevant traffic easily

Use the built-in inline aggregating copper and fiber optic TAP to access the traffic running between the client and the network. Avoid the complexity, time

& cost required to configure switch mirror ports or to install standalone TAPs.

Copper and fiber optic cable testing

Understand cable performance by measuring twisted pair cable wiremap and length. Use cable identifiers and IntelliTone toning to locate and identify cables. Measure the optical power received through fiber optic cables. Verify the cleanliness of fiber optic connections by viewing connector end faces with the FiberInspectoR USB video probe.

Save test results

Save the AutoTest performance data in a PDF report to share with colleagues or outside parties, for trouble ticket documentation, as a record of historical performance for benchmarking & as a certification report after a new infrastructure deployment.

General

Dimensions

Weight

Display

AC adapter

10.3 in x 5.3 in x 2.9 in

3.5 lb (1.6 kg)

5.7 in (14.5 cm) LCD with projected capacitance touch screen, 480 x 640 pixels

Input: 100-240 Vac, 50-60 Hz, 1.0 A

Output: +15 Vdc, 2.0 A

Battery type Lithium ion battery pack, 7.2 V

Approximately 3-4 hours depending on type of Battery life

Memory usage, 4 hours to charge from 10% capacity to

90% capacity with the unit powered off

Internal: 2GB shared between system & user files

SD card: 4 GB, brand and model selected for optimal performance

USB 2.0 A port: for use w/USB storage devices

Network analysis ports Two RJ-45 10/100/1000BASE-T Ethernet

Two SFP 100BASE-FX/1000BASE-X Ethernet

Management port One RJ-45 10/100BASE-T Ethernet

Wi-Fi adapter data rate 802.11a: 6/9/12/24/36/48/54 Mbps

802.11b: 1/2/5.5/11 Mbps

802.11g: 6/9/12/24/36/48/54 Mbps

802.11n (20 MHz): MCS0-23, up to 216 Mbps

802.11n (40 MHz): MCS0-23, up to 450 Mbps

Wi-Fi adapter operating frequency

Wi-Fi security

Environmental and Regulatory

Operating temperature 32°F to 122°F (0°C to 50°C)

Battery charging

32°F to 104°F (0°C to 40°C) temperature

Storage temperature

Operating humidity (% RH without condensation)

Shock and vibration

Safety

Operating altitude

Storage altitude

Pollution degree

EMC

2.412 ~ 2.484 GHz

(Industrial Scientific Medical Band)

5.170 ~ 5.825 GHz

64/128-Bit WEP Key, WPA, WPA2, 802.1X

-40°F to 160°F

-4°F to 122°F for periods longer than 1 week

5% to 45% at 32°F to 122°F (0°C to 50°C)

5% to 75% at 32°F to 104°F (0°C to 40°C)

5% to 95% at 32°F to 86°F (0°C to 30°C)

Meets the requirements of MIL-PRF-28800F for

Class 3 Equipment

CAN/CSA-C22.2 No. 61010-1-04, IEC 61010-

1:2001

13,123 ft (4,000 m), 10,500 ft (3,200 m) with

AC adapter

39,370 ft (12,000 m)

2

EN 61326-1:2006

1T-1000

1T-2000

1T-3000

OneTouch AT Network Assistant Copper/Fiber LAN option

OneTouch AT Network Assistant with Copper/Fiber LAN and Wi-Fi options

OneTouch AT Network Assistant with Copper/Fiber LAN, Wi-Fi, inline and capture options

$4995.00

$7995.00

$9995.00

1T-1000

includes module and test frame, frame carry strap, AC adapter and line cord, wiremap adapter #1, RJ45 coupler, RJ45 patch cable, accessories pouch, carrying case, getting started guide, and resource CD with user manual

IT-2000 includes module and test frame, frame carry strap, AC adapter and line cord, wiremap adapter #1, RJ45 coupler, RJ45 patch cable, external directional antenna with mounting clip, accessories pouch, carrying case, getting started guide, and resource CD with user manual

IT-3000 includes module and test frame, frame carry strap, AC adapter and line cord, wiremap adapters #1 - #6, RJ45 coupler, RJ45 patch cable, external directional antenna with mounting clip, SD card, USB SD card reader, USB flash drive, two 1000BASE-SX SFP fiber transceivers, accessories pouch, carrying case, getting started guide, and resource CD with user manual

83

Major Credit Cards Accepted

1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com

Datacomtools.com

The Web’s Best Source for Telecom Tools and Testers

79 Harborview Avenue, Stamford CT 06902

FIBER OPTIC CABLE ASSEMBLIES

10GB Fiber Optic Patch Cords

62.5/125µm Fiber Optic Patch Cords

50/125µm Fiber Optic Patch Cords

LC Fiber End

10G

1 Meter

3 Meters

5 Meters

10 Meters

62.5/125

1 Meter

3 Meters

5 Meters

10 Meters

62.5/125

1 Meter

3 Meters

5 Meters

10 Meters

50/125

1 Meter

3 Meters

5 Meters

10 Meters

ST Fiber End SC Fiber End

SC-SC Connector

SCSC10G-1M

SCSC10G-3M

SCSC10G-5M

$22.40

$26.25

$30.35

SC-LC Connector

SCLC10G-1M

SCLC10G-3M

SCLC10G-5M

$25.25

$29.85

$34.35

LC-LC Connector

LCLC10G-1M

LCLC10G-3M

LCLC105-5M

$25.45

$30.00

$34.55

SCSC10G-10M $40.30

SCLC10G-10M $45.75 LCLC10G-10M $45.95

ST-ST Connector

STST6-1M

STST6-3M

STST6-5M

STST6-10M

SC-LC Connector

SCLC6-1M

SCLC6-3M

SCLC6-5M

SCLC6-10M

ST-SC Connector

$17.95

STSC6-1M

SC-SC Connector

$19.25

SCSC6-1M

$20.00

STSC6-3M

$22.25

STSC6-5M

$27.75

STSC6-10M

$21.25

$23.50

$28.75

SCSC6-3M

SCSC6-5M

SCSC6-10M

$21.25

$23.55

$25.80

$31.50

LC-LC Connector

LCLC6-1M

LCLC6-3M

LCLC6-5M

LCLC6-10M

ST-LC Connector

$22.85

STLC6-1M

$25.15

STLC6-3M

$27.75

STLC6-5M

$33.75

STLC6-10M

$20.25

$22.40

$24.50

$29.90

$20.25

$22.55

$24.85

$30.45

ST-ST Connector

STST5-1M

STST5-3M

STST5-5M

STST5-10M

SC-SC Connector

$17.95

SCSC5-1M

LC-LC Connector

$20.25

LCLC5-1M

$20.00

SCSC5-3M

$22.25

SCSC5-5M

$27.75

SCSC5-10M

$22.40

$24.55

$29.90

LCLC5-3M

LCLC5-5M

LCLC5-10M

$22.85

$25.25

$27.69

$33.75

Pre-Terminated Fiber Harnesses

Multimode

Singlemode

10GB Laser Optimized

Armored

Pigtails

Backbone Trunk Cables

Call for quotes on custom types & lengths

1.800.543.4333

2-3 day turnaround on most cable assemblies

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement