ATV 20.1 inch PVM Instruction And Operation Manual

Add to my manuals
24 Pages

advertisement

ATV 20.1 inch PVM Instruction And Operation Manual | Manualzz

Instruction and Operation

M A N U A L

TFT-LCD MONITOR

TFT-LCD PUBLIC VIEW MONITOR

COLOR TFT-LCD MONITOR

Please read this manual thoroughly before use, and keep it handy for future reference.

LIMITATION OF LIABILITY

THE INFORMATION IN THIS PUBLICATION IS BELIEVED TO BE ACCURATE IN ALL RESPECTS,

HOWEVER, WE CANNOT ASSUME RESPONSIBILITY FOR ANY CONSEQUENCES RESULTING FROM

THE USE THEREOF. THE INFORMATION CONTAINED HEREIN IS SUBJECT TO CHANGE WITHOUT

NOTICE. REVISIONS OR NEW EDITIONS TO THIS PUBLICATION MAY BE ISSUED TO INCORPORATE

SUCH CHANGES.

1

WARNINGS AND CAUTIONS:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION

GRILLS OR OTHER OPENINGS ON THE EQUIPMENT.

CAUTION:

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER(OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

PRECAUTIONS

Safety -------------------------------------------- Installation -------------------------------------

Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by the qualified personnel before operating it any further.

Do not install the unit in an extremely hot or humid place or in a place subject to excessive dust, mechanical vibration.

Unplug the unit from the wall oulet if it is not going to be used for several days or more. To disconnect the cord, pull it out by the plug. Never pull the cord itself.

The unit is not designed to be waterproof.

Exposure to rain or water may damage the unit.

Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on surfaces (rugs, blankets, etc.) or near materials(curtains, draperies) that may block the ventilation holes.

Cleaning -----------------------------------------

Clean the unit with a slightly damp soft cloth.

Use a mild household detergent. Never use strong solvents such as thinner or benzine as they might damage the finish of the unit.

Height and vertical linearity controls located at the rear panel are for special adjustments by qualified personnel only.

Retain the original carton and packing materials for safe transport of this unit in the future.

2

FCC COMPLIANCE STATEMENT

FCC INFORMATION :

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY

WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC

RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST

HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL

ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY

ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION

MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION

OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE

IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS

OWN EXPENSE.

CAUTION :

CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE

MANUFACTURED COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

CET APPAREIL NUMERIQUE DE LA CLASSE A EST CONFORME A LA NORME NMB-003 DU

CANADA.

CE COMPLIANCE STATEMENT

WARNING

THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS PRODUCT MAY CAUSE

RADIO INTERFERENCE IN WHICH CASE THE USER MAY BE REQUIRED TO TAKE

ADEQUATE MEASURES.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED

BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING

TO THE INSTRUCTIONS.

3

IMPORTANT SAFEGUARDS

1.

READ INSTRUCTIONS -- All the safety and operating instructions should be read before the appliance is operated.

2.

RETAIN INSTRUCTIONS -- The safety and operating instructions should be retained for future reference.

3.

CLEANING -- Unplug video monitor or equipment from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4.

ATTACHMENTS -- Do not use attachments not recommended by the video monitor or equipment manufacturer as they may result in the risk of fire, electric shock or injury to persons.

5.

WATER AND MOISTURE -- Do not use video monitor or equipment near water -- for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, or the like.

6.

ACCESSORIES -- Do not place video monitor or equipment on an unstable cart, stand or table. The video monitor or equipment may fall, causing serious injury to a child or adult, and serious damage to the equipment. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturer.

6A.

Video monitor or equipment and cart combinations should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the equipment and cart combination to overturn.

10.

POWER CORDS -- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.

HEED WARNINGS -- Follow all instructions marked on the video monitor or equipment.

12.

LIGHTNING -- For added protection for video monitor or equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power-line surges.

13.

OVERLOADING --Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

14.

OBJECT AND LIQUID ENTRY -- Never push objects of any kind into video monitor or equipment through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

15.

SERVICING -- Do not attempt to service video monitor or equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

16.

DAMAGE REQUIRING SERVICE -- Unplug video monitor or equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions:

7.

VENTILATION -- Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure reliable operation of the video monitor or equipment and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the video monitor or equipment on a bed, sofa, rug, or other similar surface. Video monitor or equipment should never be placed near or over a radiator or heat register. Video monitor or equipment receiver should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.

8.

POWER SOURCES -- Video monitor or equipment should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your video monitor or equipment dealer or local power company. For video monitor or equipment designed to operate from battery power refer to the operating instructions.

9.

GROUNDING OR POLARIZATION -- This video monitor may be equipped with a polarized alternating - current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

A. When the power-supply cord or the plug has been damaged.

B. If liquid has spilled, or objects have fallen into the video product.

C. If the video product has been exposed to rain or water.

D. If the video product does not operate normally by following the operating instructions, adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation.

E. If the video product has been dropped, or the cabinet damaged.

F. When the video product exhibits a distinct change in performance -- this indicates a need for service.

17.

REPLACEMENT PARTS -- When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

18.

SAFETY CHECK -- Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition.

Alternate Warnings - This video monitor is equipped with a three-wire grounding-type plug, a plug having a third

(grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

19.

20.

FIELD INSTALLATION -- This installation should be made by a qualified service person and should conform to all local codes.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that product heat.

<Notes>

When viewing a fixed screen for an extended period of time, residual image or blurriness may appear.

4

TABLE OF CONTENTS

CHAPTER 1. DESCRIPTION

DESACRIPTION

FEATURES

ACCESSORIES

CHAPTER 2. FRONT AND REAR PANEL

THE FRONT PANEL

THE REAR PANEL

POWER CONNECTION

VIDEO AND AUDIO CONNECTION

CHAPTER 3. REMOTE CONTROL

THE FRONT PANEL

USER BUTTON

CHAPTER 4. SETUP MODE

OVERVIEW

OSD WINDOW OF MAIN MENU

SELECTING SCREEN MODE

MOTION SETUP

TIME/DATE

PICTURE ADJUSTMENT

CAMERA TITLE

CAMERA ADJUSTMENT

PIP ADJUSTMENT

CONFIGURATION

ADJUSTING OSD WINDOW

CHAPTER 5. TROUBLESHOOTING

CHAPTER 6. SPECIFICATIONS

SPECIFICATION OF CAMERAS

CAMERA INSTALLATION

5

10

13

14

14

15

15

10

10

11

12

16

17

18

7

8

8

7

8

9

9

9

6

6

6

6

19

20

20

CHAPTER 1 - DESCRIPTION

DESCRIPTION

The Color TFT-LCD Monitor can display up to two video sources.

The monitor features built-in video motion detection (VMD) allowing the monitor image to switch to one or both of the camera images which contains motion.

The monitor provides four display modes including full-screen (CAM1 or CAM2), picture-in-picture(PIP) mode and picture-by-picture (PBP) mode.

All monitor programming is accomplished via an IR remote control.

FEATURES

Superior Image Quality with 3D Comb filter

Motion Detection Capability

PIP & PBP Display

Fully Programmable via remote control

Built-in Light Sensor

Three Video Output Connectors

DC 12 Volts Output

ACCESSORIES

Please make sure the following items are included with your LCD Monitor.

DC Type

Instruction and Operation

M A N U A L

TFT-LCD MONITOR

TFT-LCD PUBLIC VIEW MONITOR

COLOR TFT-LCD MONITOR

Please read this manual thoroughly before use, and keep it handy for future reference.

User Manual

AC Type (AC 24V)

Instruction and Operation

M A N U A L

TFT-LCD MONITOR

TFT-LCD PUBLIC VIEW MONITOR

COLOR TFT-LCD MONITOR

Please read this manual thoroughly before use, and keep it handy for future reference.

Remote Control

User Manual Remote Control

Wires for power connection are not supplied.

6

DC Adaptor Power Cord

CHAPTER 2 - FRONT AND REAR PANEL

THE FRONT PANEL

C

A

(20.1”)

B

A B

C

(26” & 32”)

A. Internal camera

B. IR Sensor / Light sensor (Detect ambient light)

C. Internal speakers

7

THE REAR PANEL

(20.1” Monitor)

1 4

4

6 7

DC type

9 10

6 7

AC type

9 10

3

2

1 4 5

6 8

DC type

9 10

4 5

6 8

AC type

9 10

3

2

(20.1” PVM)

DC type

(26” & 32” Monitor)

Power Connection

DC Type

1. DC Jack

4. DC12V Output

AC Type

2. AC24V Input

Connect the adapter jack to the DC power connector on the back of the monitor.

Used to supply DC12V power to an external camera.(DC12V / 500mA)

3. Power Switch

4. DC12V Output

Supply AC24 volts power to the monitor using two wires.

CAUTION : Do not use a non-isolated AC 24V power supply.

Switch on to supply AC24V to the monitor.

Used to supply DC12V power to an external camera.(DC12V / 500mA)

Video and Audio Connection

5. Integrated Camera

6 & 7. External Cameras

8. INT Out

9. Monitor Out

10. Audio Input

Video input of the integrated camera.

Video input connectors of external camera video sources.

Either left or right BNC can be input or output.

The connectors have auto-termination internal switches.

Video output connector of the integrated camera.

The Video output connector of the same video as the picture displayed.

Audio Input connectors.

8

CHAPTER 3 -

REMOTE CONTROL & USER BUTTON

REMOTE CONTROL

1

12

3

5

9

13

2

4

6

7

8

10

11

1. POWER

Turn the monitor on and off.

2. MUTE

Cut off the sound.

3. FREEZE

Not available.

4. ZOOM

Change the picture size on the screen. (26" & 32" Only)

- Wide : The input image is expanded to fill the 16:9

display area.

- Wide Zoom : The input image is more expanded to

horizontally and vertically to maintain the aspect ratio

of the input image.

- Normal : The aspect ratio of the input image is 4:3 on

the 16:9 display area.

5. EXIT

Exit from the OSD or go to the previous OSD window.

6. AUTO

Not available.

7. MENU

Turn the OSD menu on.

Go to the sub menu of the selected item.

8. ◄ (►)

Decrease (Increase) the value of the selected item.

Decrease (Increase) the volume of internal speakers.

9. ()

Move up (down) in the menu list.

10. SOURCE

Changes the picture display mode.

11. DISPLAY

Display the setup information.

12. CA1 & Ca2 (1 & 2)

Display CA1 or Ca2 in full on the screen.

13. Sequence

Sequence the main window from CA1 to Ca2.

USER BUTTON (26” & 32” Only)

1

2

3

1.Turns the monitor on and off.

2.Selects the video source.

3.Adjusts brightness of the picture.

4.Changes the volume of internal speakers.

4

9

CHAPTER 4 - SETUP MODE

OVERVIEW

All functions can be controlled via the supplied remote control.

Pressing the MENU button places the unit into the programming mode.

In the programming mode, the

and

buttons are used to move the cursor up and down in the OSD Setup menu.

◄ and ► are used to adjust the chosen item.

26 & 32" : Some functions can be controlled by using user control buttons.

For more information refer to USER BUTTON in the previous page.

OSD WINDOW OF MAIN MENU

Main Menu

Screen Mode

Motion Set

Time/Date

Picture

Camera Title

Camera Adjust

PIP

Configuration

OSD Menu

Mode1

10

SELECTING SCREEN MODE

Screen Mode is used to select how the camera image is displayed on the screen.

There are 4 options available.

Use the SOURCE button on the remote control can be used to change Screen Mode.

Main Menu

Press the MENU button and select Screen Mode using ▲ or ▼.

Select Mode1, Mode2, Mode3, or Mode4 using ◄ or ►.

Screen Mode

Motion Set

Time/Date

Picture

Camera Title

Camera Adjust

PIP

Configuration

OSD Menu

Mode1

ITEMS

MODE 1

CA1

MODE 2

CA1

MODE 3

CA1

MODE 4

CA1 CA2

DESCRIPTIONS

Full display of the selected camera.

The screen is switched to the camera which contains motion when the camera MOTION is enabled.

Main + PIP

The PIP window appears if motion occurs on the PIP camera and then disappears after DWELL TIME expires.

Main + PIP

The main window and the PIP window are exchanged when motion occurs on the PIP window during the Dwell time.

PBP display

Full area of each camera is displayed on the screen side by side.

11

MOTION SETUP

This monitor has a motion detection function to support automatic switching from one of the cameras to the other camera with motion.

Motion detection is available on both camera inputs.

The Motion Sensitivity and other options for motion detection can be adjusted in this setup menu.

MOTION ENABLE and SENSITIVITY options can be adjusted individually on each camera.

Motion Set

Camera

Motion Enable

Sensitivity

Capture Time

Dwell Time

Motion Time

Ca1

Off

10

5 Sec

5 Sec

18 : 00 : 00 -

06 : 00 : 00

Press the Menu button.

Select Motion Set using ▲ or ▼ and then press the

Menu button to display its sub-menu.

Select one of the options in the Motion Set menu list.

Adjust the selected option using ◄ or ►.

◄ and ► are used to select one of items of Motion Time and

and are used to change selected item.

Camera

This menu is used to select the camera for adjustment of motion detection options.

Motion Enable

This option is used to activate or deactivate the motion detection function.·

"On" : Motion detection of selected camera is enabled.

"Off" : Motion detection of selected camera is disabled.

Sensitivity

Use Sensitivity to adjust the sensitivity of motion detection.

To increase (decrease) the motion detection sensitivity of the camera, increase (decrease) the sensitivity value.

Capture Time

Capture Time is the interval that the motion detection is processed.

When it is set to 5 SEC, the motion detection is processed at every five seconds.

This means that the minimum switching interval from the camera to the other camera is 5 seconds when this monitor is operated in MODE 1.

It supports up to 99 seconds.

Dwell Time

If there is a motion in the field of view of the CA2, the main screen switches to the CA2 image for a length of time set in the Dwell Time setup menu and then returns to the previous screen mode. Dwell Time is the time that the motion detected camera is displayed on the screen. It supports up to 99 seconds.

Motion Time

This option is used to set when the motion detection function is active. The time represented by the upper line is the start of motion detection and the lower line represents the end of motion detection time period.

The motion detection function only works during Motion Time.

If the user want to use motion detection all the time, adjust the time of lower line sooner than the time of upper line.

12

TIME/DATE

The Time/Date menu allows you to adjust current time and date for display on the screen.

Time/Date

Date Format

Date

Time

Display

US

MM / DD / YYYY

HH : MM : SS

On

Press the Menu button.

Select Time/Date using ▲ or ▼ and then press the Menu button to display its sub-menu.

Select one of the options in the Time/Date menu list.

Adjust the selected option using ◄ or ►.

◄ and ►are used to select one of items of Date and Time and

and are used to change its value.

Date Format

The option on the time and date setup screen is date format.

This is used to select between the following three date formats:

FORMAT

US (default)

EURO

ASIA

DISPLAY

MM/DD/YYYY

DD/MM/YYY

YYYY/MM/DD

EXAMPLE

01/01/2004

01/01/2004

2004/01/01

Date

This field is used to set the current date.

The format displayed on the screen is dependent on the format option.

Time

This field is used to set the time in the 24-hour format.

Display

The Display option on the time and date setup screen allows you to select whether to display the time and date on the screen. The default option is ON.

13

PICTURE ADJUSTMENT

The Picture menu allows you to modify the picture quality by adjusting the contrast, brightness, color, tint and sharpness.

Picture

Volume

Contrast

Brightness

Color

Sharpness

0

65

60

40

50

13

Press the Menu button.

Select Picture using ▲ or ▼ and then press the Menu button to display its sub-menu.

Select one of the options in the Picture menu list.

Adjust the selected option using ◄ or ►.

1) Tint is only activated in NTSC system.

Volume

The volume adjustment controls the audio level to the internal speakers.

Contrast, Brightness, Color, Tint and Sharpness

Change the contrast, brightness, color, tint and sharpness according to personal preference.

CAMERA TITLE

The Camera Title setup screen allows you to modify the name of each camera.

This option is also used to select whether or not the screen displays the camera title.

Camera Title

CA1

CA2

Display

INT

EXT

On

Press the Menu button.

Select Camera Title using ▲ or ▼ and then press the Menu button to display its sub-menu.

Select CA1 or CA2 using ▲ or ▼ .

Select one character using ◄ or ►.

Change the selected character using ▲ or ▼ .

Press the EXIT button.

Select the Display “On” or “Off”.

CA1 & CA2

An 8-character title can be designated for each camera or video input, and this title appears on the screen when the display option is On and the camera is selected.

Display

To display the camera title on the screen, select the Display option "On".

14

CAMERA ADJUSTMENT

The picture quality of each camera can be adjusted by using the Camera Adjust setup menu.

This setup menu is composed of 7 options.

Camera Adjust

Camera

Contrast

Brightness

Color

1)

Tint

Sharpness

Sequence

CA1

30

20

30

25

0

3

Press the Menu button.

Select Camera Adjust using ▲ or ▼ and then press the

Menu button to display its sub-menu.

Select one of the options in the Camera Adjust menu list.

Adjust the selected option using ◄ or ►.

*) Tint is only activated in NTSC system.

These options are dependent on Screen Mode.

Mode1 : Not applied.

Mode2 & 3 : PIP window.

Mode4 : All cameras.

Sequence

This option is used to set the dwell time of the selected camera when the monitor is operated in the

Sequence mode. The picture sequences in the order of CA1, CA2, CA1, CA2.. by pressing the SEQUENCE button on the remote control.

PIP ADJUSTMENT

This setup menu is used to adjust the PIP position and size.

PIP

Pip Size

Pip H Pos

Pip V Pos

2

5

5

Press the Menu button.

Select PIP using ▲ or ▼ and then press the Menu button to display its sub-menu.

Select one of the options in the PIP menu list.

Adjust the selected option using ◄ or ►.

Pip Size

The PIP window size can be adjusted by using the PIP SIZE menu option.

Larger PIP window sizes can be obtained by increasing the PIP SIZE value.

Pip H&V Pos

The PIP window can be displayed in any position on the screen by adjusting these options.

15

CONFIGURATION

Configuration

Photo Input

Recall

Auto Power

On Time

Off Time

Dynamic Contrast

Noise Reduction

Color Temp

Off

No

Off

09 : 00 : 00

18 : 00 : 00

1

Press the Menu button.

Select Configuration using ▲ or ▼ and then press the

Menu button to display its sub-menu.

Select one of the options in the Configuration menu list.

Adjust the selected option using ◄ or ►.

◄ and ► are used to select one of items of On Time and

Off Time and and are used to change its value.

Photo Input

This monitor can be turned off and goes to power saving mode if there is low ambient light by setting Photo

Input to "On".

Recall

This option allows you to return the unit to factory-defined defaults.Some items do not go to factory default values.

Auto Power

This option is used to turn the monitor on and off automatically at On Time and Off Time.

Dynamic Contrast

Use this option to enhance the contrast of the image.

This feature makes dark colors darker and bright colors brighter.

Noise Reduction

This option is used to reduce the picture noise.

Temporal noise reduction is the motion based noise reduction.

MPEG noise reduction is for removing unwanted ringing and block noise from images that have undergone

MPEG or JPEG compression and decompression.

Noise Reduction

Temporal NR

MPEG NR

Low

10

Press the Menu button.

Select Configuration using ▲ or ▼ and then press the

Menu button to display its sub-menu.

Select Noise Reduction and then press the menu button.

Select Temporal NR or MPEG NR and then adjust the selected option using ◄ or ►.

16

Color Temperature

User Color Temp to change the screen color standard.

User

Red

Green

Blue

80

80

80

Press the Menu button.

Select Configuration using ▲ or ▼ and then press the

Menu button to display its sub-menu.

Select Color Temperature and then press the menu button.

Select one of the options in the Color Temperature menu list.

Adjust the selected option using ◄ or ►.

ADJUSTING OSD WINDOW

Use the OSD Menu to adjust the OSD window.

OSD language and other options can be adjusted in this setup menu.

OSD MENU

Language

Blending

Time

English

3

40 Sec

Press the Menu button.

Select OSD Menu using ▲ or ▼ and then press the

Menu button to display its sub-menu.

Select one of the options using in the OSD Menu list.

Adjust the selected option using ◄ or ►.

Language

Select OSD language to be displayed.

Blending

Use the Blending setup menu to change the opaqueness of the background of the OSD.

Time

Use the TIME setup menu to adjust the on-screen display time.

17

CHAPTER 5. TROUBLESHOOTING

1. Screen is black and power indicator is off.

·Ensure that the power cord is firmly connected and the LCD monitor is on.

·Check PHOTO INPUT adjustment.

2. No Picture.

·Check the signal connections.

3. The image is too light or too dark.

·Adjust the Brightness and Contrast.

4. Picture is impropely tinted.

·Check color adjustment.

5. Motion not detected or detected too often.

·Adjust sensitivity of motion detection.

6. Remote control malfunctions.

·Check the battery terminals.

·Replace the remote control batteries.

7. No sound.

·Ensure that the audio cables are firmly connected to both the audio-in ports on your monitor.

·Check the volume level.

18

CHAPTER 6. SPECIFICATIONS

ITEMS

LCD

Video/Audio

Size

Pixel Format

Brightness (Typical)

Contrast Ratio (Typical)

Viewing Angle H/V (Typical, Cr ≥ 10)

Color Depth

Light Source / Lifetime

Response Time (Typical)

Composite System

Level

Input

 

Output

Audio

3D Combfilter

Connector

Level

Input

Amplifier

Light Sensor (Power save mode)

Power Requirement DC Type

AC Type

DC Output Connector

Power Consumption

Operating Temperature

Storage Temperature

Case Material

Dimension

Weight

Accessories DC Type

AC Type

20.1 inch PVM

20.1 inches

1600 x 1200 x RGB

300 cd/m2

800 : 1

178 / 178

8bit / 16.7M Colors

CCFL / 45,000 Hrs

8 ms (G to G)

NTSC / PAL

1Vp-p @ 75 ohm

Internal Camera x 1

External Camera x 1

Internal Camera x 1

External Camera x 1

Monitor Output x 1

Yes

BNC

Line Level

2-Terminal RCA x 1

5W x 2

Yes

DC12V @ 6.2A

AC24V / 4.5A

x1(DC 12V / 0.5 A max)

75W (DC12V) / 110W (AC24V)

26 inch Monitor 32 inch Monitor

26 inches

1366 x 768 x RGB

450 cd/m2

2500 : 1

32 inches

1366 x 768 x RGB

500 cd/m2

3000 : 1

178 / 178

8bit / 16.7M Colors

178 / 178

8bit / 16.7M Colors

6U-CCFL / 60,000 Hrs (Typical) 12CCFL / 50,000 Hrs (Typical)

6.5 ms (Gray to Gray)

NTSC / PAL

1Vp-p @ 75 ohm

Internal Camera x 1

8 ms (Gray to Gray)

NTSC / PAL

1Vp-p @ 75 ohm

Internal Camera x 1

External Camera x 1 External Camera x 1

Internal Camera x 1

External Camera x 1

Monitor Output x 1

YES

Internal Camera x 1

External Camera x 1

Monitor Output x 1

BNC

Line Level

2-Terminal RCA x 1

5W x 2

YES

BNC

Line Level

2-Terminal RCA x 1

Yes

DC24V / 5.4A

5W x 2

Yes

DC24V / 6.8A

x1(DC 12V / 0.5A max)

130 W

O

0 ~ 40 C x1(DC 12V / 0.5A max)

164 W

Plastic

463.0mm x 453.0mm x 82.0mm (Net)

640.0mm x 540.0mm x 190.0mm (Packing)

7.6Kg (Net)

11Kg (Packing)

Manual, Remote Control,

AC-DC Adaptor, Power Cord

Manual, Remote Control (AC 24V)

Metal

658.4 x 492.4 x 92.60 mm (Net)

802.0 x 606.0 x 253.0 mm (Packing)

Metal

796.5 x 582.0 x 98.2 mm (Net)

915.0 x 715.0 x 270.0 mm (Packing)

14.5 kg (Net)

19.0 Kg (Packing)

19.0 kg (Net)

24.0 Kg (Packing)

Manual, Remote Control Manual, Remote Control

19

Items

VF Lens

CCD

Resolution

Sensitivity

S/N Ratio

Auto Iris

AWB

WDR

Electronic

Shutter

SPECIFICATION OF CAMERAS

Option1 Option2 Option3 Option4 Option5

4~9mm(F2.0~2.8)

1/3”

480 TVL

4~8mm(F2.0~360)

1/3”

2.8~11mm(F1.4~360)

1/3”

480 TVL

2.8~11mm(F2.8~360)

1/3”

580 TVL

2.8~11mm(F2.8~360)

1/3”

580 TVL

1.0 Lux (F2.0, 50 IRE) 1.0 Lux (F2.0, 50 IRE) 1.0 Lux (F2.0, 50 IRE) 1.0 Lux (F2.0, 30 IRE) 1.0 Lux (F2.0, 30 IRE)

≥50dB ≥50dB ≥50dB ≥45dB ≥45dB

Yes

480 TVL

Yes Yes Yes Yes

Yes

No

1/60 ~ 1/100,000

1/50 ~ 1/100,000

Yes

Yes

1/60 ~ 1/100,000

1/50 ~ 1/100,000

Yes

Yes

1/60 ~ 1/100,000

1/50 ~ 1/100,000

Yes

No

1/60 ~ 1/100,000

1/50 ~ 1/100,000

Yes

Yes

1/60 ~ 1/100,000

1/50 ~ 1/100,000

CAMERA INSTALLATION

Make sure that you should adjust the camera direction correctly before use.

20

MEMO

MEMO

Instruction and Operation

M A N U A L

TFT-LCD MONITOR

TFT-LCD PUBLIC VIEW MONITOR

PRINTED IN KOREA 50302352C

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement