RP3703 EN
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING
FLASH AND ARROWHEAD WITHIN THE
TRIANGLE IS A
WA R N I N G S I G N
ALERTING YOU OF
"DANGEROUS
VOLTAGE" INSIDE
THE PRODUCT.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
D O N OT R E M OV E C OV E R
( O R BAC K ) . N O U S E R S E RV I C E A B L E PA RT S I N S I D E . R E F E R S E RV I C I N G
T O Q UA L I F I E D S E RV I C E
PERSONNEL.
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING
SIGN
ALERTING YOU OF
I M P O R TA N T
INSTRUCTIONS
A C C O M PA N Y I N G
T H E P R O D U C T.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
WARNING: TO PREVENT FIRE OR ELECTRICAL
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
FCC Information
FCC Information
For Your Safety
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
In accordance with FCC requirements, changes or
modifications not expressly approved by Thomson
Inc. could void the user’s authority to operate this
product.
This device generates and uses radio frequency
(RF) energy, and if not installed and used properly,
this equipment may cause interference to radio
and television reception.
If this equipment does cause interference to radio
or television reception (which you can determine
by unplugging the unit), try to correct the
interference by one or more of the following
measures:
• Re-orient the receiving antenna (that is, the
antenna for the radio or television that is
“receiving” the interference).
• Move the unit away from the equipment that is
receiving interference.
• Plug the unit into a different wall outlet so that
the unit and the equipment receiving interference
are on different branch circuits.
If these measures do not eliminate the
interference, please consult your dealer or an
experienced radio/television technician for
additional suggestions. Also, the Federal
Communications Commission has prepared a
helpful booklet, “How To Identify and Resolve
Radio TV Interference Problems.” This booklet is
available from the U.S. Government Printing
Office, Washington, DC 20402. Please specify stock
number 004-000-00345-4 when ordering copies.
The AC power plug is polarized
(one blade is wider than the
other) and only fits into AC
power outlets one way. If the
plug will not go into the outlet
completely, turn the plug over
and try to insert it the other way. If it still does
not fit, contact a qualified electrician to change
the outlet, or use a different one. Do not attempt
to bypass this safety feature.
EN
CAUTION : TO PREVENT ELECTRIC
SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
Technical Specification
Product: Clock Radio
Brand: RCA
Model: RP3703
Electrical Consumption
Power Supply: 120V~60Hz
Power Consumption: 9 Watts
IMPORTER
Comercializadora Thomson de México, S.A. de
C.V.
Miguel de Cervantes Saavedra 57
Col. Ampliación Granada
C.P. 11529 Mexico D.F.
Telefono: (55)25 81 53 20
RFC: CTM-980723-KS5
For Your Records
In the event that service should be required, you
may need both the model number and the serial
number. In the space below, record the date and
place of purchase:
Date of Purchase:
Place of Purchase:
Service Information
This product should be serviced only by those
specially trained in appropriate servicing
techniques. For instructions on how to obtain
service, refer to the warranty included in this
Guide.
1
Battery Back-Up Operation
This clock radio is equipped with a memory
holding system that can be powered with
a 9V battery (not included). The power
failure protection circuit will not operate
unless battery is installed.
When normal household power is interrupted, or AC line cord is unplugged, the
battery will power the clock radio to keep
track of time and alarm settings programmed into memory. When the battery
backup functions, the digital display will
not be backlighted, however, the function
of alarm still occurs during the power interruption if remaining battery power is
adequate. Normal operation will resume
after AC power is restored so you will not
have to reset the time or the alarm.
EN
Install battery as follows:
1. Remove battery compartment door (located at the bottom of the radio) by applying thumb pressure to area indicated
on battery door and then lift the door
out and off the cabinet.
2. Connect a 9V battery to the connector
plug.
3. Insert battery in the compartment and
replace the compartment door.
Power Failure Indicator
When AC power is interrupted (disconnected) for a short period of time, both
time and alarm settings will change (unless optional battery is installed). After AC
power is restored (reconnected), the Digital Display will blink to indicate that power
was interrupted and you should readjust
the time and alarm settings.
Note: Alkaline (NEDA 1604A / IEC 6LR61) battery is
recommended. Carbon Zinc (NEDA 1604 / IEC 6F22) battery may be used but memory holding time will be substantially reduced. Memory holding time for a fresh alkaline battery is
approximately 8 hours (if radio or alarm is not operated), which should
take care of short, nuisance-type AC power failures. To preserve
battery life, the radio should remain plugged into an AC outlet. As
batteries get older, their voltage drops and memory may be lost. Be
sure to replace the battery periodically. Battery should be removed
if the radio will be stored for more than one month. Leaky batteries may badly damage the clock radio.
2
Operating the clock
EN
WAKE 1
ON/OFF
< REV
WAKE 2
NAP
SLEEP
FWD >
WAKE 1
CANCEL
WAKE 2
Setting Clock Time
Setting the Wake Time
Your digital clock operates on a 12-hour
standard mechanism. An indicator will be
shown beside AM accordingly.
1. Slide the SET button to either WAKE
1 or WAKE 2 position
2. Press REV or FWD to set wake time.
3. When wake time is set. You can exit
set mode by sliding the SET button to
the LOCK position.
1. Slide the SET button to CLOCK position.
2. Press REV or FWD to set the clock time.
When you press and hold REV or FWD,
the time decrements or increments will
follow by a faster rate. No adjustment
can be made the SET button is on LOCK
position.
3
Operating the Clock
EN Waking by Selected Source
Programme
You may be woken up by music
or
alarm
.
1. Select an AM or FM station. (refer to
“Tuning the Stations”)
2. Set wake time (see above direction).
3. Press the WAKE 1 or WAKE 2 button
to select waking up by music or alarm.
An indicator is up next to the selected
setting.
4. Volume level is not adjustable.
Note: When you turn off the alarm
or
Nap Mode
This function wakes you up after a short
period of time. Simply:
Note: The unit equips with GRAD-UWAKE feature, the alarm tone volume will
increase gradually to its maximum in about
30 to 45 seconds.
1. Press NAP and release. The NAP indicator will light, default time 0:20 will
light on display.
2. Press REV or FWD to adjust nap time.
The time range is from 10 minutes to 2
hours.
3. The clock will be shown after 5 seconds
if no button is pressed. The NAP indicator will lit up.
4. Press NAP once to show time left.
Sleep Mode
Stop the Nap alarm
In sleep mode, the radio will turn off automatically. Simply:
Press NAP or follow “Turning off Alarm”.
the music
by pressing O F F
F, the
alarm
or the music
will turn on at
the same time tomorrow.
1. Press SLEEP then the time display will
exhibit 0:59 and the radio will turn on.
2. While holding SLEEP, press REV or FWD
to set the sleep time. The time range is
from 1 minutes to 2 hours.
3. Release SLEEP and the current time will
be shown again. The radio is turned
4
on and you may select the station as
usual. The radio will turn off when the
preset time elapses. If you decide to
turn off the radio sooner, press SNOOZE
or ON/OFF.
4. When SLEEP is activated again, the
sleep time will be the same as the one
you set before.
5. Press SLEEP to read the remaining sleep
time.
Notes:
1. Press and hold NAP to cancel the nap
setting.
2. Only alarm sound can be selected.
Operating the radio
TUNING
1. Press ON/OFF (located on the top of the
radio) to turn on the radio.
2. Slide the FM/AM button to select band.
3. Use the TUNING knob to select a station.
4. Use the VOLUME knob to adjust the
volume level.
5. Press the ON/OFF button to turn off the
radio.
FM
Tuning the Stations
AM
VOL
EN
The descriptions and characteristics in this
owner’s manual are for the purpose of
general reference only and not as a
guarantee. In order to provide you with
the highest quality product, we may make
changes or modifications without prior
notice. The English version serves as the
final reference on all product and
operational details should any
discrepancies arise in other languages.
5
Operating the Clock
EN Turning off Alarm
Silence the alarm momentarily
Press SNOOZE. The alarm will sound again
when the snooze period is over. (see
“Snooze Alarm Operation”).
Stop the alarm
Press ON/OFF. Then the alarm will be on
the following day at the same time.
Disable the alarm permanently
1. Press CANCEL button.
2. The WAKE 1 and WAKE 2 indicator will
be flashing.
3. Press WAKE 1 or WAKE 2 button within
3 seconds to deactivate the alarm function
permanently.
Tip: You can activate the previously
set alarm time by pressing WAKE 1 or
WAKE 2 button.
1. Press and hold SNOOZE.
2. Press REV or FWD to set the “quiet”
period (the default time is 9 minutes) from
1 minute to 30 minutes. Release button,
then the “quiet” period is set.
Seconds Time Display
The unit may display in seconds.
1. The clock should be in normal lock
mode.
2. Press REV or FWD to show seconds display.
3. Release to return to the hour and
minute display.
Auto Dimmer
Slide the AUTO DIMMER switch at the
back of the unit to the ON position. The
brightness of the LED display will vary automatically according to the environment.
Slide to the OFF position, the display will
remain at its brightest level.
Snooze Alarm Operation
FM
6
AM
This operation allows extra sleep time after the alarm is on. The alarm will be off
by pressing SNOOZE until the snooze period is over. Snooze function can be used
repeatedly up to 2 hours. After this, the
alarm will turn off until the next alarm
conditions are met. Set the “quiet time”
as follow:
U.S. Limited Warranty
What your warranty covers:
• Defects in materials or workmanship.
EN
For how long after your purchase:
• One year from date of purchase.
The warranty period for rental units begins with the first rental or 45 days from date of shipment to the
rental firm, whichever comes first.
What we will do:
• Provide you with a new, or at our option, a refurbished unit. The exchange unit is under warranty for
the remainder of the original product’s warranty period.
• Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product
is within the warranty period must be presented to obtain warranty service. For rental firms, proof of
first rental is also required.
How to make a warranty claim:
• Properly pack your unit. Include any cables, etc., which were originally provided with the product.
We recommend using the original carton and packing materials.
• Include evidence of purchase date such as the bill of sale. Also print your name and address and a
description of the defect. Send via standard UPS or its equivalent to:
Thomson Inc.
Product Exchange Center
11721 B Alameda Avenue
Socorro, Texas 79927
• Insure your shipment for of loss or damage. Thomson accepts no liability in case of damage or loss en
route to Thomson.
• Pay any charges billed to you by the Exchange Center for service not covered by the warranty.
• A new or refurbished unit will be shipped to you freight prepaid.
What your warranty does not cover:
• Customer instruction. (Your Owner’s Manual provides information regarding operating Instructions
and user controls. For additional information, ask your dealer.)
• Installation and set-up service adjustments.
• Batteries.
• Damage from misuse or neglect.
• Products which have been modified or incorporated into other products.
• Products purchased or serviced outside the USA.
• Acts of nature, such as but not limited to lightning damage.
7
U.S. Limited Warranty
EN
Limitation of Warranty:
• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO
VERBAL OR WRITTEN INFORMATION GIVEN BY THOMSON INC., ITS AGENTS OR EMPLOYEES
SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY
OF THE CONSUMER. THOMSON INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES
AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA. EXCEPT
TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO
THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
How state law relates to this warranty:
• Some states do not allow the exclusion nor limitation of incidental or consequential damages, or
limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply
to you.
• This warranty gives you specific legal rights, and you also may have other rights that vary from state
to state.
If you purchased your product outside the USA:
This warranty does not apply. Contact your dealer for warranty information.
8
Canadian Limited Warranty
Thomson multimedia Ltd. warrants to the purchaser or gift recipient that if any manufacturing defect
becomes apparent in this product within 1 year from the original date of purchase, it will be replaced
free of charge, including return transportation.
EN
This warranty does not include damage to the product resulting from accidents, misuse or leaking
batteries.
Should your product not perform properly during the warranty period, either:
1. Return it to the selling dealer with proof of purchase for replacement,
OR
2. Remove the batteries (where applicable), and pack product complete with accessories in the original
carton (or equivalent). Mail prepaid (with proof of purchase) and insured to:
Thomson multimedia Ltd.
6200 Edwards Blvd.,
Mississauga, Ontario,
L5T 2V7
Canada
The provisions of this written warranty are in addition to and not a modification of or subtraction from
the statutory warranties and other rights and remedies contained in any applicable legislation, and to
the extent that any such provisions purport to disclaim, exclude or limit any such statutory warranties
and other rights and remedies, such provisions shall be deemed to be amended to the extent necessary
to comply therewith.
If you are unable to find a qualified servicer for out of warranty service, you may write to:
Thomson Inc.
P.O. Box 0944
Indianapolis, Indiana, U.S.A., 46206-0944
Attach your sales receipt to this booklet for future reference. This information is required if service is
needed during the warranty period.
PURCHASE DATE
NAME OF STORE
7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement