Manual - English
lene ee He ean wena bee De pei Le aaa e aa
o
=
a
ELECTROHOME
1 Compact DVD Player with
Progressive Scan
A a
ужа.
da
Frnt fe re EE Pe ee
| WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
| APPLIANCE TO RAIN OR MOISTURE,
THIS SYMBOL INDICATES THAT
A DANGEROUS VOLTAGE CONSTITUTINGA
, RISK OF ELECTRIC SHOCK IS PRESENT
A WITHIN THIS UNIT.
THiS SYMBOL INDICATES THAT THERE ARE
IMPORTANT GPERATING AND
L MAINTENANCE INSTRUCTIONS IN THE
A MAINTENANCE INSTRUCTIONS IN THE
O LITERATURE ACCOMPANYING THE
CAUTION
г AA A
8 ПЕНЫ:
CAUTION: TO REDUCE THE RISK OF ELECTRIC
* SHOCK, DONOT REMOVE COVER {OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL
APPLIANCE.
The important note is located on the rear of the cabinet,
к [ ‘
IMPORTANT SAFEGUARDS
I. READ INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
и 4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners.
6. ATTACHMENTS
The manufacturer of this unit does not make any recommendations for attachments,
as they may cause hazards.
7. WATER AND MOISTURE
Do not use this unit near water. For example, near a bathtub, washbow!, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
8. ACCESSORIES
Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall,
causing serious injury, and serious damage to the unit.
| al? SILIGA
(Symbol provided by RETAC)
! 8A. An appliance and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance and cart combination to overturn.
9. VENTILATION
Slots and openings in the cabinet back or bottom are provided for ventilation, and to ensure reliable
operation of the unit, and to protect it from overheating. These openings must not be blocked or
covered, The openings should never be blocked by placing the unit on a bed, sofa, rug, or other
similar surface. This unit should never be placed near or over a radiator or heat source, This unit
should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have been adhered to.
VIDEO OUT return to the CVBS,S-VIDEO, YUV from P-SCAN when restarting
10. POWER SOURCE
the power after having switched it f om CVBS,S- VIDEO YUV to P-SCAN. This unit should be operated only from the typc of power source indicated on the rating plate If you
are not sure of the type of power supply to your home, consult your appliance dealer or local power
company. For units intended to operate from battery power, or other sources, refer to the respective
pages in this Owner's Manual for their operating instructions.
IL.GROUNDING OR POLARIZATION
This unit is equipped with a polarized altemating-current line plug (plug having one blade wider
than the other). This plug will fit into the power outlet only one way. This is a safety feature, Ifyou are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fait to fit,
contact your electrician to replace your obsolete outlet, Instead of the polarized alternating-current
line plug, your unit may be equipped with a 3-wire grounding-type plug (a plug having a third
grounding) pin). This plug will only fit into a grounding-type power outlet. This too, is a safety
feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
12. POWER-CORD PROTECTION |
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance. :
13. LIGHTNING - |
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods
of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the unit due to lightning and power ling surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power fines or other
electric light or power circuits, or where it can fall onto or against such power lies or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching such
power lines or circuits, as contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock,
16. OBJECTAND LIQUID ENTRY
Do not push objects through any openfhgs in this unit, as they may touch dangerous voltage points
or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into
the unit.
17.0UTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system
is grounded to provide some protection against voltage surges and built-up static charges, Section
8 10 of the National Electrical Code (NEC), ANSI/NFPA 70, provides information with respect to
proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode. See figure below,
EXAMPLE OF ANNTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE
POWER SEBACE GROUNTSAG
ÉLICTIOQE SY5ICHA
HEC - ARDNAL ELTCTIRCAL CODE TEC ATT 250 PART O
18. SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. DAMAGE REQUIRING SERVICE
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
a. When the power-supply cord or plug is damaged.
b. Ifliquid has been spilled, or objects have fallen into the unit,
nee reer en sees Erna manana e en Fe ata a
. Ifthe unit has been exposed to rain or water.
. If the unit does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating instructions, as an improper adjustment
of other controls may result in damage and will often require extensive work by a qualified
technician to restore the unit to its normal operation.
e. Ifthe unit has been dropped or the cabinet has been damaged.
f. When the unit exhibits a distinct change in performance, this indicates a need for service.
20. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
21. SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to perform safety
checks to determine that the unit is in proper operating condition,
22. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers)that produce heat.
23. DISC SLOT
Keep your fingers well clear of the disc slot as it is closing. It may cause serious personal injury,
24, CONNECTING
When you connect the product to other equipment, turn off the power and unplug all of the
equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal
injury, Read the owner’ s manual of the other equipment carefully and follow the instructions when
making any connections.
25.5S0UND VOLUME y
Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high
volume sound may cause hearing or speaker damage.
26. SOUND DISTORTION
Do not allow the product output distorted sound for a longtime. If may cause speaker overheating
and fire.
27. LASER BEAM
Do not look into the opening of the disc slot or ventilation opening of the product to see the source
of the laser beam. It may cause sight damage.
28. DISC
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause
serious personal injury and product malfunction,
29. NOTE TO CABLE TY SYSTEM INSTALLER
This reminder is provided to call the Cable TY system installer's attention to Article 820-40 of the
NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close to the point of cable entry as
practical.
30. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
=. ©
This device complies with Part 15 of the FCC Rules. Operation is subject of the following two
conditions: (1)this device may not cause harmfui interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Table of Discs Your DVD player Will play
Supporting function of disc
Remote Control
Systems Connection
Chapter 1 Basic Operation
1. Turn On the TV and your DVD player
2. Place a disc
3. Play
4, Program Play
Chapter 2 Additional Operation
1. Selecting Tracks (compatible with DVD, SVCD, VCD, CD, WMA,
MP3/JPEG discs)
2. Skipping Tracks (compatible with DVD, SVCD, VCD, CD,
WMA, MP3/IPEG discs)
3. Multispeed Fast Motion Playback (compatible with DVD, SVCD, VCD, CD,
MP3 discs)
4, Multispeed Slow motion playback (compatible with DVD, SVCD, VCD, CD,
discs)
5. Freeze Frame and Frame Advance (compatible with DVD, SVCD, VCD, CD,
WMA, MP3 discs)
6. Using the Repeat Feature (pompatible with DVD, SVCD, VCD, CD,
WMA, MP3 discs)
7. Using the Display Feature (compatible with DVD, SVCD, VCD, CD
WMA, MP3 discs)
8. Using the Search Feature (compatible with DVD, SVCD, VCD, CD,
discs)
8. Changing the Soundtrack (compatible with SVCD, VCD, CD,
WMA, MP3/JIPEG discs)
10. Changing the Audio Language (compatible with DVD, SVCD discs) mm
11. Subtitles (compatible with DVD, SVCD discs)
12. Changing the Camera Angle (compatible with DVD discs)
13. Mute the Audio Output (compatible with DVD, SVCD, VCD, CD,
WMA, MP3 discs)
14. Zoom In the Video Image (compatible with DVD, SVCD, VCD,
JPEG discs)
15. Repeat a Specific Segment on the Disc that You Define (compatible with
DVD, SVCD, VCD, CD, WMA, MP3 discs)
16. Volume control (compatible with DVD, SVCD, VCD, CD, WMA,
MP3 discs)
Chapter 3 Playing WMA, MP3 and JPEG discs —
Chapter 4 The Menu Set Ups
Disc maintenance
Specifications
= Sh th th th th AN EY
~1
10
10
10
10
11
il
11
12
13
25
25
Types of Diameter | Playback Time Data Format Remark
12em | layer: 120min DVD Format Disc:
2 layers: 240min| Compressed Digital
DVD I layer: 80min | Audio Compréssed Digital
8em -.. Video (Moving picture)
2 layers: 180min
| ‚ МРЕО2 ; Includ
i Compressed Digital Audio} Include:
SVCD 12¢m 45min Compressed Digital Video { SVCD. CVD
{ Moving picture)
Include:
- MPEGI
VCD 12cm 74min Compressed Digital Audio vente
Compressed Digital Video VCDI O,
Som 20min { Moving picture) DVED
CD 12cm 74min CD-DA:
Вст 20min Digital Audio
HD-CD | 12cm 74mi HD-CD:
min Digital Audio
MP3/JPEG 12cm 600min Compressed Digital Audio
WMA 12cm Compressed Digital Audio
© Note: DVD-R, CD-R, CD-RW discs can be played in this DVD player,
Prevalent marks of a few functions as follows:
NTSC zone code & TV system 16:9] 8 Picture scale mode
HTS C :
®
[J] [cosy] DOLBY digital surround sound [7 [restmicten] Parental lock
DQ
(2) Numbers of sound language | View angle
Numbers of subtitle language co PS
EE ии
* DVD disc can support many functions, different makers, and different function support.
1. SUBTITLE
2. OPEN/CLOSE
3. NUMERIC KEYS
4. PBC
5.STEP
6. PROGRAM
7. SLOW
8. SETUP
9. CURSOR CONTROL
/ENTER
10.TITLE
11. PAUSE
12.MUTE
13. FR, FF
14. PREV, NEXT
15. STOP
16. PLAY
17. MENU
18. ZOOM
19. А-В
20. VOL+,VOL-
21. REPEAT
22. OSD
23. GOTO
24. L/R
25. RETURN
26, CLEAR
27. LANGUAGE
28. ANGLE
29. STAND-BY
N.
©) ООС
OW HE OE
: 7
4 Ar
i a E
5 г | т ;
Re,
EEE AA EL
aia TARA TLL neal,
1) Before connecting, make sure to turn off power of all apparatus.
2) After finishing connection, turn on the power again.
AY cable (accessory) should be connected by color,
Yellow piug-------- video terminal (yellow)
White plug--------- left audio terminal (white)
Red plug-------==-- rightaudio terminal (red)
Must connect properly, especially the piug should be inserted fo the Bottom.
Notice: this picture is only for your reference, all the functions should be based on the real unit
machine.
PF Y
we
CENTER WOLD
5.1channel
amplifier
SL
с ETE CIF
ГОТ
e o 900
pine
i.Turn On the TV and Your DVD Play
Press the Power or STANDBY button on the player or the remote controller,and Loading
dm Y — rrr
appears on the TV screen, If there is no disc in the DVD player.
2.Place A Disc
Press the Open / Close button on the remote controller or the front of the DVD player, and
Open appears on the screen. Then Place a disc gently into the tray with the disc's label
facing up (double-sided discs have content on both sides, so you can place either side up),
and press the Open / Close button again to close the disc tray, Close appears and the player
starts to read. Then the disc starts playing automatically. (Note: Of some certain type discs,
after reading out the type, the Play or Enter button should be pressed to start playing.)
3. Piay
The contents of each disc menu vary according to how the disc was-authored and what
features are included. The disc menu will be turned on for you to select, when Menu button
pressed. Also play and pause can be switched with the Pause button on the remote. Moreover,
such as menu play, title play, sequence play etc., These different play modes are offered,
a} Menu Play (compatible with DVD, SVCD, VCD2.0 discs)
I. Press Menu Button
TV screen displays the DVD Root Menu when a DVD disc is loaded.
II. When a DVD disc is loaded, you can press Arrow buttons to highlight the menu item you
want to choose.
UT, Press Enter or Play button, you can begin play with the highlighted,
IV. Return when playing: When a DVD disc is playing, press Menu (PBC) button, and you
can return to Root Menu. -
Y. Stop
1) When you press Stop button for the first time, the player turns into quasi stop state.
To begin the title over, press Stop twice.
2) In quasi stop state, the player remembers where you stopped, when you start playing the
disc again, the DVD player picked up where you left off.
3) In stop state, when you press Play, the player enters seguence playback mode.
e For disc protection, before you press Open / Close button to eject the disc tray when
playing, please press Stop button first. After taking out the disc, press Open / Close
agaín to close the tray.
if you're not going to use the DVD player for a long time, be sure to unplug the ac cord.
b) Title Play (compatible with DVD discs only)
I. During DVD playback, press Title button to display the DVD title content.
If. Press the Arrow buttons to highlight the title you want to choose, and press Enter. Also
you can press numeric buttons to choose.
II. The DVD player begins with the chapter | of the chosen title,
ve PLATEA
eee ee AA E LL
¢)} Sequence Play (compatible with DVD, SVCD, VCD, CD, WMA, MP3/JPEG discs)
I. When a SVCD or VCD disc is loaded and PBC is on, once PBC button pressed, PBC switches
off. Then the player can play in sequence playback mode; when PBC button pressed twice,
PBC switches on.
III. Except for SVCD or VCD discs, in the stop state, when press Play button, the player then
enters sequence playback mode. This feature is effective to all the compatible discs.
d) Program Play (compatible with DVD, SVCD, VCD, СВ, WMA, MP3/JPEG discs)
The Program Playback option allows you to enter the order in which you want chapters or tracks
to play, maxi-mum to 16(DYD,SYCD, VCD), LO(CD, MP3/JPEG, WMA).
Program Menu:
DVD, WMA, MP3/JPEG, SVCD, VCD. discs:
q HE,
Eo
Tile 2
THIS 3
LAT
LLE
LEE
RT
If PBC is on, this operation will turn PBC off while the chapters / tracks plays in prog-
rammed order.
® According to the highlight, use the Numeric buttons to enter the chapters / tracks in the
order you want them to play. Then press Play or use Arrow buttons to highlight the PLAY
item and press Enter. The chapters / tracks will play in the programmed order.
You can program maximum 16 titles / chapters / tracks.
e According to the Direction Indicator on the menu, you can press Arrow buttons to high-
fight where you want to enter.
e During Program Playback, if Program button pressed, the programmed order and the
contents will be displayed on the screen, and the Program Playback will be stopped;
Also you can press Stop and Play to resume normal playback.
Notes:
e To clear the programmed order, use Arrow buttons to highlight the CLEAR ALL item, then
press Enter.
e To modify the programmed order, use Arrow buttons to highlight the modifying item and
enter the new chapter / track yon want to program directiy.
6
1. Selecting Tracks (compatible with DVD, SVCD, VCD, CD, WMA, MP3 JPEG discs)
a) When playing a DVD disc, press Numeric buttons on the menu or title page to select tracks;
During DVD playback, you can input desired title number directly.
b) Asa SVCD or VCD disc, during sequence playback, press Numeric buttons to select tracks.
{During Program Playback and PBC is on, you can only press Prev / Next button to select)
¢} As for CD discs, press Numeric buttons directly to select tracks.
=
d) when playing WMA, MP3 / JPEG discs, press numeric buttons to select different tracks on
current track list.
Notes: To select tracks from I to 10, press corresponding Numeric buttons (1-9, 10)
To select tracks above 10, press 10+ button. For example, to select the track 15, press
10+ and 5 burton, If the selected track is not available, the input would be invalid.
2. Skipping Tracks (compatible with DVD, SVCD, VCD, CD, WMA, MP3 /JPEG discs)
a) To skip forward to the beginning of the next title / chapter / track on a disc, press Next on
the remote or the front of the player. )
b) To skip backward to the beginnifig of the preceding title / chapter / track on a disc, press,
Prev on the remote or the front of the player.
* When playing the last chapter / track on a SVCD or VCD dise with PBC off, pressing Next
button will stop the playback; When playing the first chapter / track, pressing Prev button
will stop the playback; When stop, pressing Next / Prev button will be invalid.
* Ifa DVD disc is loaded, it varies according to how the disc was configed.
3. Multispeed Fast Motion Playback (compatible with DVD, SVCD, VCD, CD, MP3 discs )
You can search in forward or reverse mode during playback.
à) Press the F,F button on the remote during playback to search through a disc, Press the
button again on the remote to search at the next speed. Fast Forward Playback has four
speeds: X 2, X 4, X 8, X 16. Witheachconsecu tive press ofthe button, the se arch
speed increases. If you press the button six times, Fast Forward Playback cycles back
to normal playback. During DVD playback, when Fast Forward Playback gets to the
beginning of the next title / chapter, it resumes normal playback; During SVCD or VCD
playback with PBC on, when Fast Forward Playback gets to the beginning of the next
track, it resumes normal playback.
9 Press Play button to resume normal playback.
b) Press the E.R button on the remote during playback to search through a disc. Press the button
again on the remote to search at the next speed. Fast Reverse Playback has four speeds: X 2,
X 4, X 8, X 16. With each consecutive press of the button , the search speed increases. If
you press the button six times, Fast Reverse Playback cycles back to normal playback.
During DVD playback, when Fast Reverse Playback gets to the beginning of the playing title
/ chapter, it resumes normal playback; During SVCD or VCD playback with PBC on, when
Fast Reverse Playback gets to the beginning of the playing track, it resumes normal playback.
* Press Play button to resume normal playback.
7
4. Multispeed Slow Motion Playback {compatible with DVD, SVCD, VCD, . dises)
Press Slow button when pictures moving, you can enter Slow Motion Playback mode.
Press the Slow button on the remote during playback. Press the button again on the remote to
play at the next speed. Slow Motion Playback has five speeds: 1/8,1/6, 1/4, 1/2. With
each consecutive press of the button, the play speed decreases. If you press the button six
times, Slow Motion Playback cycles back to normal playback.Press Play button to resume
normai playback
5. Freeze Frame and Frame Advance (compatible with DYD, SY.CD, YCD, CD, WMA, MP3 discs)
a) During CD, WMA or MP3 / JPEG playback, press Pause once to freeze playback; Press
the Pause button again or Play button to resume normal playback.
b) During DVD, SVCD or VCD playback, press Pause once to freeze playback; Press of the
Pause button again to advance the picture one frame at a time or press Play to resume normal
playback,
6. Using the Repeat Feature (compatible with DVD, SVCD, VCD, CD, WMA, MP3 discs)
While a disc is playing, press Repeat button once, and the repeat status appears to show current
repeat mode. User can also press arrow button to choose the mode and press ENTER to confirm.
A) In SVCD, VCD, CD, MP3,WMA sequence playback mode, press Repeat button again
to turn on repeat mode, Press the button again on the remote to turn to the next repeat
mode. There are three repeat options: Off,Repeat Single, Repeat All.
With each consecutive press of the button, the repeat mode switches. If you press the
button four times, repeat mode cycles back to Off.
b) In DVD playback, press Repeat button again to turn on repeat mode. There are three repeat
options: Repeat Off, Repeat Chapter, and Repeat Title . With each consecutive press of the button,
the repeat mode switches. If you press the button four times, repeat mode cycles back to Off,
7. Using the Display Feature {compatible with DVD, SVCD, VCD, CD, WMA, MP3 discs)
a) Loading and playing DVDs (two pages)
Press OSD button to show the following,
Time, Title, Chapter, Audio, Subtitle, Angle Status.
Press the button for the third time, the display menu fades out.
b) Loading and playing SVCD dises (two pages)
b) Loading and playing SVCD, VCD discs (two pages)
e Press OSD button once to show the first page:
Time, PBC On/Off.
Press the button again, the display menu fades out,
PE
8. Using the Search Feature (compatible with DYD, SYCD, VCD, CD discs)
You can use Search feature to select a title / chapter / track number or go to a specific point in
a title. Firstly, press Search (Goto) button on the remote controller to bring up the search menu
and enter the edit state; Secondly, press Arrow buttons to highlight the title / Time / chapter
Thirdly, use Numeric buttons to enter the title / chapter / track you want to play or the elapsed
time you want to go to in that title; At last, press Enter button to start playback. For example,
entering 01:23:56 will start playback one hour, twenty-three minutes and fifty-six seconds
into the title. If the input number is illegal, the error information INVALID KEY will be
displayed on the screen.
Notes
I. This feature does not work in Program Play mode.
IL If PBC is on, it will turn off automatically when Search Playback starts.
9. Changing the Soundtrack (compatible with SVCD, VCD, CD discs)
Press the L/ R button to display current soundtrack.
a) Press the button can switch soundtracks.
b) Press the button again on the remote to turn to next soundtrack.
I. When playing a SVCD or VCD disc, there are three soundtracks: Stereo, Left, Right,
With each consecutive press of the button, the soundtrack switches. If you press the button
four times, soundtrack cycles back to Stereo.
H. When playing a CD or MP3 disc, there are three: Stereo, Left, Right.
Notes:
e Switch to L/L Auto A/D Detect or RR Auto A/D Detect to have varions antistrophes (you
can have an antistrophe with the singing on the disc), according to the contents on the
disc).
* When playing a dual-language VCD movie disc, press the L/R button to select the
desired language.
Mr mn maa LA
10. Changing the Audio Language (compatible with DVD, SVCD discs)
During disc playback, press Language on the remote once, and the andio language info banner
appears. When a DVD or SVCD is recorded whit multiple soundtracks, you can use the Lang-
uage feature to temporarily change the audio language (the language of the soundtrack) With
each consecutive press of the Language button, the audio language switches and the
corresponding serial number appears on the screen. For example, Language Icon:
{1 English DTS 6CH] or [Off] (the availability of the languages are disc-dependent).
Notes: AUDIO Language option are practicality-dependent,
11. Subtitles (compatible with DVD, SVCD discs) 7
Press the Subtitle button on the remote once, and the subtitle info banner appears. When a
DVDor SVCD is recorded with subtitles, you can use the Subtitle feature to view the sub-
titles onscreen. By default, subtitles are off. The info banner will display Subtitle Off. To
dispiay subtitles, press the Subtitle button again, The default language with its correspond-
ing serial number will be displayed in the info banner and subtitles will be displayed in that
language. With each consecutive press of the Subtitle button, the
subtitle switches, For example, Language Icon:
[] English DTS 6CH] or [Off] (the availability of the subtitles are disc-dependent). To turn
subtitles off, press the Subtitle button until Subtitle Off is displayed.
Notes: SUBTITLE Language option are practicality-dependent,
12. Changing the Camera Angle (compatible with DVD discs)
During disc playback, press Angle on the remote once, and the angel icon appears.Some
DVDs contain multipleangles of a particular scene or sequence, so you can use the Angle
feature to view.Press the Angle button again to go to the next camera angle. Ef multiple
camera angles are available, the Angle icon displays the current angle numberand the
number of angles available. For example: Angle Icon: [*/*] or [Off]; 1 / 4 indicates that
angie one js beingdisplayed, and there are four different angles available. (This feature is
disc-dependent. [f no additional camera angles are available, the Invalid Key will be
displayed.)
13. Mute the Audio Output (compatible with DYD, SYCD, VCD, CD, WMA, MP3 discs)
Pressing the Mute button allows you to reduce sound to an inaudible level, and MUTE will be
displayed on screen. Press the button again or press the Vo! +/- button to return to the normal
condition.
Notes:
» Ifthe player playback disc without sound, please try to press Mute button to resume.
10
id. Zoom En the Video Image (compatible with DVD, SVCD, VCD, JPEG discs)
a) The Zoom Function allows you to enlarge or zoom out the video image and to pan though the
image. Press Zoom repeatedly to activate the function and choose the required zoom factor:
Q1,02,03,0ff.
Notes:
o This feature does not work when the Disc Menu appears.
5) Use the Arrow buttons to pan across the screen when the zoom factor is Q1,02,Q3.
15. Repeat a Specific Segment on the Disc that You Define (compatible with DVD, SVCD,
YCD, CD, HD-CD, WMA, MP3 discs)
a} During the normal or fast motion playback, press the A-B butfon once, and REPEATA-
will appears on the sereen. This indicates the start of the loop to be repeated.
b) During the normal of fast motion playback, press A-B again, and REPEAT A-B will
appears on the screen. It indicates the end of the foop.
e Looping will run from set point A to set point B until you turn off Repeat.
e) Press A-B again to cancel A-B loop mode.
® When playing a SVCD, VCD, or CD disc, you can repeat a specific segment only in one
track. When the next track begins, A-B Repeat turns off automatically.
* When playing a DVD disc, you can repeat a specific segment only in one title / chapter.
16. Volume control (compatible with DVD, SVCD, VCD, CD, WMA, MP3 discs)
® You can press the Volume button on the front of TV set or the amplifier to control the
sound ievel.
¢ Pressing the Yol+ bution on the remote allow you to amplify the sound level; Pressing
Vol- will reduce the sound jevel.
Notes:
s During DVD PCM output playback, this feature does not work.
11
Place a MP3 / JPEG disc into the tray, and the player will auto search the directories saved
MP3 / JPEG files, After searching, it wiil auto go to the first directory saved MP3 files (to
the disc containing both MP3 and JPEG files; To the disc containing single type of files, it
will auto go to the first directory) and play the first song in the directory { 01: is highlighted).
The screen displays as the picture below:
Current MP3/PEG fllé name,
If a JPEG file playing, the
name should be *.jpg.
Current directory name
|
* PN й
Use the Arrow buttons to enter the Directory Region and highlight the desired directory, then
the first track under it starts playback; Also you can use the Arrow buttons to eater the File
Region and select the file you want to play.
Notes:
I. Press the Left and Right arrow buttons, you can activate Directory Region, File Region
and File Switch Region separately.
IT. The highlight in Directory Region and File Region is shown as the picture above; While
it appears a transparent rectangle in File Switch Region.
IIL. In File Switch Region, you can press the Left and Right arrow buttons to switch the hig-
hlight, then press Enter; the M, P, and G button is illustrated in the above picture.
For example, if a disc with MP3 and JPEG files but without any NES files is loaded, the
color of the letter M and P will appear to white and G black. If a MP3 file playing,
“M” turns darker.
IV. To the disc with WMA, MP3 and JPEG files, when playing a JPEG picture, press the
Return button to return to JPEG list.
V. You can press the Numeric buttons to select the file you want to play. For example, if you
desire the 15" track in current list, press the 10+ button once, then press 5, the 15" starts
playback,
Notes: When playing a disc with MP3 files, video cannot be output while only digital audio
can.
When playing JPEG pictures, the screen will display the following picture. Press the Leftand
Right arrow buttons to highlight the icon of the desired page, then press ENTER button.
12
2. Use the Right direction to slect the setting.
3. Use the Up/Down direction buttons to select the setting to be changed.
4, Press OK to cycle through each possible option or display a list of the options. When a list of
options appears, press the Up/Down direction buttons to move among the displayed options.
5. Press OK again to choose the option and change the setting.
6. Press OK (after cycling through the options)to change the displayed value of the next available
option and change the setting.
The system Menu allows the user to configure the player's behavior to work in hermony with |
components(e.g.TV receiver) to which the player is connected. |
Press the Set up button to invoke the Setup Menu. Pressing the Set up button while the Setup Menu
is displayed will turn off the Setup Menu.Setup Menu can be opened during playback, pressed Set.
up key again will resume playback.
When the Setup Menu is invoked, the OSD shows the following selections.Each button indicates a The following subsections explain the available options for each of the player's Language settings.
category of settings that can be changed: |
OSD Language ,
Selecting the OSD Language setting allows the user to select a preferred language for the OSD
menus and messages. The following options are available:
Français
The Up/Down direction buttons are used to select the category of settings to be changed. The page
of setting for that category will be displayed directly once select the category.
When the category changes are set,press Up/Down repeatedly to return to the text buttons.Selecting
the appropriate button and pressing OK can change settings in a different category.
Language Settings
English = Menu/OSDis in English(factory default).
I. Using the Up/Down direction buttons,move to the Language button. The player's Language settings
French = Menu/OSD is in French
will appear:
Note:
Some DVDs may not include the pre-selected language, In this case,the player automatically
displays menus consistent with the disc's initial language setting.
A ———————;—————T—————]——l—/E ——
: Subtitle Language
Subtitle setting allows the user to select a preferred subtitle language(DYD only). The following
options are available:
13 14
RT NN ERT me aa ette PE
DVD Menu
| Selecting the DVD Menu setting allows the user to select a preferred DVD Menu language(DVD only),
The following options are availabie:
x
mm kn AA же —
sé English
dd LE
English = Subtitle preference is English
French = Subtitle preference is French
Auto = Subtitle preference is the primary language on the disc
A H d Го English = DVD Menu preference is English
French = DVD Menu preference is French
Selecting the Audio setting allows the user to select a preferred audio language(DVD only).
The following options are available:
Note:
Some DVD menus may appear in a different language than selected.
| Video Settings
x English my I. Using the Up/Down direction buttons, move to the Video button. The player's Video settings
Егелсй will appear:
English = Audio preference is English
French = Audio preference is French
Note:
Some DVDs may be played in a different language than selected,
15 16
2. Use the Right direction buttons to select the setting.
3. Use the Up/Down direction buttons to select the setting to be changed.
4. Press OK to cycle through each possible options. When a list of options appears, press the Up/Down
direction buttons to move among the diaplayed options.
5, Press OK again to choose the option and change the setting.
6. Press OK (after cycling through the options)to change the displayed value of the next available
option and change the setting.
The following subsections explain the available options for each of the player's Videl settings.
TV Aspect Ratio
Selecting the TV Shape setting allows the user to select the aspect ratio of the TV(DVDand VCD/
SVCD/CVD only).The following options are available:
4:3
il
Aspect ratio of TV is 4:3
16:9 = Aspectratio of TV is 16:9. Both widescreen and 4:3 contents will fill
the enrire screen,
Note:
» most widescreen DVDs will not alfow pan&scan conversion If 4:3 PS is selected on these
DVDs, letterboxing will be used instead.
«lf 16:9 is selected and a 4:3 TV is connected, 16:9 content will appear distorted during
playback{objects look thin).
17
a с
View mode
The user may select one of the following options:
_Helght Fit
Width Flt
Auto Fit
Fill = Scale Up/Down the image in horizontal and vertical direction respectively to fill the
and width.
Original = Fit the original screen size. (MPEG)
Height Fit = Scale Up/Down the image in vertical direction to fit the screen height, and keep
the same scale ratio for horizontal.
Width Fit = Scale Up/Dwon the image in horizontal direction to fit the screen width, and keep
the same scale ratio for vertical.
Fitto Screen = Like letter box. Take the minimum value of horizontally fit scale ratio and
vertically fit scale ratio,
Pan Scan = Take the maximun value of horizontally fit scale ratio and vertically fit scale ratio.
TV System(NTSC or PAL)
Selecting the Video setting allows the user to select the TV standard(DVD and VCD/SVCD/CVD only).
NTSC = TVisNTSC, PAL content is played at NTSC resolution and frame rate (factory defaule).
18
il
TV is PAL. NTSC content is played at PAL resolution and frame rate.
PAL
Ifthe content is PAL, the output is PAL. If the content is NTSC, the output is NTSC,
Multi
Video Output
Selecting the Video setting allows the user to switch between different video outputs and connections
to the TV Monitor. The following options are available;
CVBS
S-VIDEO
DONA ES
|.
re уе
Smart Picture
Smart picture setting allows user adjust the picture's brightness, Four selections should be chosen:
Standard
Vivid
Cool
Personal
Y Standard Da ai me MAMI
Vivid
Cool
Fersonal
rt — = =
жены оке
LL AR + RRR A a aa A Toe. eee aaa
Audio Settings
fre
= Hs
Bt
BEARS nto el
EEE
E Na Jess
Ta E е НЫЕ
wii
se
A
ax ni
a
Ta
Ai
Ea i
SER! =
->
ne
En
veias Ena
dp
mir
ATENEO
HR EL Ass
TE
EES
A
1. Using the Up/Down direction buttons,move to the Audio button. The player's Audio settings will
appear,
2. Use the Right direction buttons to select the setting.
3. Use the Up/Down direction buttons to select the setting to be changed.
4. Press OK again to choose the options.
The following subsections explain the available options.
Digital Output Setting
Selecting the Digital Output setting allows the user to adjust the audio output on SPDIF Output.
The following options are available:
Off = Digital audio output is disabled.
PCM = SPDIF output is connected to a receiver that accepts PCM SPDIF.
All SPDIF output is connected to a receiver that accepts AC3/MP3/WMA/MPEG/PCM SPDIF
Il
20
Night Mode
Selecting the Night Mode setting allows the user to enable/disable the Night Mode.
The following options are available;
rrp o
A hd ES
On = Night Mode is On.
Off = Night Mode is Off (Factory default).
Down Sampling Setting
Selecting the Down Sampling setting allows the user to enable/disabie the Down Sampling.
The following options are available:
On = Down Sampling is On.
Off = Down Sampling is Off (Factory default).
21
жа = еее
Rating Settings
I. Using the Up/Down direction buttons, move to the Rating. The player's Rating settings will appear
2. Use the Right direction buttons to select the setting.
3. Use the Up/Down direction buttons to select the setting to be changed._
The following subsections explain how to change each of the player's Rating settings.
Parental Control Rating Selection
Selecting the Rating allows the user to set the parental control feature of the player.Press the QK ,
will pop up a window let user set password:
т pur st Bi en et
TEE
НН
Sp
RES
22
When user set correct password, press OK ,it will show "Correct password "message.
FR
ELL
GR.
7, NC-17
Kid Safe = Only titles with a parental control setting of | are allowed to play.
G = Only titles with a parental control setting of 2 or less are allowed to play.
PG = Only titles with a parental control setting of 3 or less are allowed to play.
«G-E3 = Only titles witha parental control setting of 4 or less are allowed to play.
PG-R = Onlytitles witha parental control setting of 5 or less are allowed to play.
R = Onlytitles witha parental control setting of 6 orless are allowed to play.
NC-17 = Only titles with a parental control setting of 7 or less are allowed to play.
Adult = Allow any title to play (Factory default).
Else,it will show a message” Incorrect Password” then disappear the window is a second.
Note:
* The factory default password is 0060
* Parental Control functions only if the DVD title has it encoded in its program. Parental Control
does not work for VCD/SVCD/CVD or CD Audio.
23
ея =.
бандит =.
RA LA a aa a a ea de ete ee A TE RN me A Lr Fe ee kt se eg pa a
Change Password
User can set new password by the Set password setting. Switch to the selection, press OK to pop up
the Enter Password window, enter the current password. Press OK twice, pop up the" Enter new
Password window, enter the new password, press OK.
3 Вы
Foca q
E
=
nme,
ro
em Ty
Tin =
=
rime
dar ere
peu PA
dein io ame Fin
1 +
mia
+ Ema
opm Ad
a
dm N
v E
ит;
A em
Pt
трлн жи
or hen rt
i
1. Using the Up/Down direction buttons,move to the Misc button. The Misc settings will appear.
2. Use the Right direction buttons to skip to select the setting.
3. Use the Up/Down direction to change the setting._
4. Press OK for each setting to cycle through the options and change the settings,
The following subsections explain the available options for each of the player's Misc settings.
Use Default Setting
Press OK, pop up window Use Default Setting”, there are two selections: Yes/No.
No = Retum to User Default Setting.
Yes = Settothe Factory Defaults.
24
ELECTROHOME WARRANTY
Consumer Electronics Products and Home Appliances
Disc protection: Thank you for choosing ELECTROHOME!
Take the disc both by the hole in the center and the brim; d: RGC Redmond Group gives the following express warranty to the original consumer purchaser or gift recipient for this
No paper shall be adhered to surface of disc neither fingerprint allowed; Electrohome brand product, when shipped in its original container and sold or distributed in Canada by RGC Redmond
e Disc must be kept clean; Group or by an Authorized Electrohome Dealer;
+
e Disc must be cleaned with soft cotton regularly by directing from disc center outside. | RGC Redmond Group warrants that this product is free, under normal use and maintenance, from any defects in material
NT ere . ; and workmanship. If any such defects shouid be found in this product within the applicable warranty period, RGC
Redmond Group shall, at its option, repair or replace the product as specified herein. Replacement parts furnished in
connection with this warranty shall be warranted for a period equal to the unexpired portion of the original equipment
warranty.
TERT
Type of video disc D VD/SVCD/VCD/MP3/CD-DA(common music laser dise) CD |
This warranty shall not apply to:
Kodak Picture CD < a. Any defects caused or repairs required as a resuit of abusive operation, negligence, accident, improper
installation or inappropriate use as outlined In the owner's manual. ’
: b, Any Electrohome product tampered with, modified, adjusted or repaired by any party other than RGC Redmond
MPEG2 Group or Electrohome's Authorized Service Centres.
¢. Damage caused or repairs required as a resuit of the use with items not specified or approved by RGC Redmond
Group, including but not limited to head cleaning tapes and chemical cleaning agents.
Audio: MPEG2 d. Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the
product including but not limited to earphones, remote contrôls, AC adapters, batteries, temperature probe, stylus,
trays, filters, cables, paper, cabinet, cabinet paris, knobs, buttons, baskets, stands, shelves, cookware and
Video/picture:
Signal output: Video:1.0Vp-p cooking utensils.
Audio: stereo 2vp-p e. Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.
f. Any damage caused by external or environmental conditions, including but not limited to transmission line/power
| , f d/backward line voltage or liquid spillage.
Function operation: Play/pause, stop, open/close, forward/backward, screen g. Any product received without appropriate model, serial number and CSA /cUL. /cULus /cETL /cETLus markings.
display, select time, part repeat, Previous/next, menu, setup, h. Any products used for rental or commercial purposes.
i. Any installation, setup and/or programming charges.
Should this Electrohome product fai! to operate during the warranty period, warranty service may be obtained upon
delivery of the Electrohome product together with proof of purchase and a copy of this LIMITED WARRANTY statement to
an Authorized Electrohome Servico Centre, In-home warranty service may be provided at RGC Redmond Group's
, , . iscretion on any Electrohome television with the screen size of 27" or larger. This warranty constitutes the entire express
Output interface: S- video output, VIDEO output(CVBS), warranty granted by RGC Redmond Group and no other dealer, service centre or their agent or employee is authorized to
coaxial output, Ÿ Cb Cr output, Y Pb Pr output. extend, enlarge or transfer this warranty on behalf of RGC Redmond Group. To the extent the law permits, RGC
Redmond Group disclaims any and all liability for direct or indirect damages or losses or for any incidental, special or
consequential damages or loss of profits resulting from a defect in materral or workmanship relating to the product,
including damages for the loss of time or use of this Electrohome product or the [oss of information. The purchaser will be
enter, L/R , angle, return, volume control, mute, subtitle display.
Voltage: 120V~ 60Hz responsibie for any removal, reinstallation, transportation and insurance costs incurred. Correction of defects, in the
, manner and period of time described herein, constitute complete fulfillment of al} obligations and responsibilities of
Consuming power; 20W Electrohome Electronics to the purchaser with respect to the product and shall constitute full satisfaction of all claims,
whether based on contract, negligence, strict liability or otherwise.
* * nu " —— li
Frequency response: = ET ED mE 22KHz(48K (sampling) CARRY-IN PARTS 8. LABOUR WARRANTY PERIODS:
Ze. z(96K)(sampling * Audio Products: 1 Year (Remote Control, if applicable — 90 Days)
+ DVD Products: 1 Year (Remote Control — 90 Days)
S/N: >90 db » LCD & Plasma Dispiay TV: 1 Year (Remote Control — 90 Days)
|, * Television Products: 1 Year (Remote Control -- 90 Days)
o * VCR Products: 1 Year (Remote Control -- 90 Days, Video Heads — 6 Months)
THD: 0.003% * Home Appliances: 1 Year
o Microwave Magnetron parts only additional 6 Years
Accessories: AV cable, infrared ray remote controller, common AAA battery, o Refrigerator / Freezer Compressor parts only, additional 4 years
1 * Heating / Cooling & Humidification Products: 1 Year (Remote Control -- 90 Days)
user manual. (Accessories AV cable, battery are dependent o Compressor parts only (if applicable), additional 4 years
on the actual incasement) В To obtain the name and address of the nearest Authorized Electrohome Service Centre or Dealer, please contact:
{No advanced notification shall be occurred regarding changes of design, specifications & tech RGC Redmond Group, 8185 Mclaughlin Road, Mississauga, ON L5R 3W7.
parameters due to constant product improvement) Рог more information on this Warranty or Service Locations, please call (805)366-5100 or toll free 1-800-663-5954,
Notice: Monday fo Friday 9:00am ~ 5:00pm Eastern Standard Time, 0472006
I. Manufactured under [license from Dolby Labarataries, Dolby and ike double-D symbol are trademarks of
Dolby Laboratories,
. This Product incorporates copyright protection technology that fs protected by method claims
of certain U.S. Patents and other Intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and Is intended for ome and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
Eb
25
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement